[ Upstream commit 5af5b85505 ]
The ti,keep-vref-on property, defined as a boolean flag in the Device
Tree schema, was incorrectly assigned a value (<1>) in the DTS file,
causing a validation error: "size (4) error for type flag". Remove
the value to match the schema and ensure compatibility with the driver
using device_property_read_bool(). This fixes the dtbs_check error.
Fixes: ed05637c30 ("ARM: dts: omap3-devkit8000: Add ADS7846 Touchscreen support")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250822225052.136919-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9658a92fad ]
The ti,en-ck32k-xtal property, defined as a boolean in the Device Tree
schema, was incorrectly assigned a value (<1>) in the DTS file, causing
a validation error: "size (4) error for type flag". The driver uses
of_property_read_bool(), expecting a boolean. Remove the value to fix
the dtbs_check error.
Fixes: 262178b6b8 ("ARM: dts: split am335x-baltos-ir5221 into dts and dtsi files")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/all/20250822222530.113520-1-jihed.chaibi.dev@gmail.com/
Link: https://lore.kernel.org/r/20250822222530.113520-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 437054b1bb ]
The prototype of __vdso_gettimeofday() uses this struct. However
gettime.h's own includes do not provide a definition for it.
Add a forward declaration, similar to other used structs.
Fixes: 42874e4eb3 ("arch: vdso: consolidate gettime prototypes")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250815-vdso-sparc64-generic-2-v2-1-b5ff80672347@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d337eef4a ]
Current depth_updated has some problems:
1) depth_updated() will be called for each hctx, while all elevators
will update async_depth for the disk level, this is not related to hctx;
2) In blk_mq_update_nr_requests(), if previous hctx update succeed and
this hctx update failed, q->nr_requests will not be updated, while
async_depth is already updated with new nr_reqeuests in previous
depth_updated();
3) All elevators are using q->nr_requests to calculate async_depth now,
however, q->nr_requests is still the old value when depth_updated() is
called from blk_mq_update_nr_requests();
Those problems are first from error path, then mq-deadline, and recently
for bfq and kyber, fix those problems by:
- pass in request_queue instead of hctx;
- move depth_updated() after q->nr_requests is updated in
blk_mq_update_nr_requests();
- add depth_updated() call inside init_sched() method to initialize
async_depth;
- remove init_hctx() method for mq-deadline and bfq that is useless now;
Fixes: 77f1e0a52d ("bfq: update internal depth state when queue depth changes")
Fixes: 39823b47bb ("block/mq-deadline: Fix the tag reservation code")
Fixes: 42e6c6ce03 ("lib/sbitmap: convert shallow_depth from one word to the whole sbitmap")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be82483d1b ]
If system suspend is aborted in the "noirq" phase (for instance, due to
an error returned by one of the device callbacks), power.is_noirq_suspended
will not be set for some devices and device_resume_noirq() will return
early for them. Consequently, noirq resume callbacks will not run for
them at all because the noirq suspend callbacks have not run for them
yet.
If any of them has power.must_resume set and late suspend has been
skipped for it (due to power.smart_suspend), early resume should be
skipped for it either, or its state may become inconsistent (for
instance, if the early resume assumes that it will always follow
noirq resume).
Make that happen by clearing power.must_resume in device_resume_noirq()
for devices with power.is_noirq_suspended clear that have been left in
suspend by device_suspend_late(), which will subsequently cause
device_resume_early() to leave the device in suspend and avoid
changing its state.
Fixes: 0d4b54c6fe ("PM / core: Add LEAVE_SUSPENDED driver flag")
Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c0c01a216 ]
When the generic vDSO does not provide time functions, as for example on
riscv32, then the time data store is not necessary.
Avoid allocating these time data pages when not used.
Fixes: df7fcbefa7 ("vdso: Add generic time data storage")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250826-vdso-cleanups-v1-1-d9b65750e49f@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9110e6f72 ]
Commit 4b30209255 ("selftests/xsk: Add tail adjustment tests and support
check") added a new global to xsk_xdp_progs.c, but left out the access in
the testapp_xdp_metadata_copy() function. Since bpf_map_update_elem() will
write to the whole bss section, it gets truncated. Fix by writing to
skel_rx->bss->count directly.
Fixes: 4b30209255 ("selftests/xsk: Add tail adjustment tests and support check")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250829-selftests-bpf-xsk_regression_fix-v1-1-5f5acdb9fe6b@suse.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ad25ebfa7 ]
It's possible to run these tests on platforms that think they have a
hotpluggable CPU1, but for whatever reason, CPU1 is not online and can't be
brought online:
# irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:210
Expected remove_cpu(1) == 0, but
remove_cpu(1) == 1 (0x1)
CPU1: failed to boot: -38
# irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:214
Expected add_cpu(1) == 0, but
add_cpu(1) == -38 (0xffffffffffffffda)
Check that CPU1 is actually online before trying to run the test.
Fixes: 66067c3c8a ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/all/20250822190140.2154646-7-briannorris@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit add03fdb9d ]
Not all platforms use the generic IRQ migration code, even if they select
GENERIC_IRQ_MIGRATION. (See, for example, powerpc / pseries_cpu_disable().)
If such platforms don't perform managed shutdown the same way, the interrupt
may not actually shut down, and these tests fail:
[ 4.357022][ T101] # irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:211
[ 4.357022][ T101] Expected irqd_is_activated(data) to be false, but is true
[ 4.358128][ T101] # irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:212
[ 4.358128][ T101] Expected irqd_is_started(data) to be false, but is true
[ 4.375558][ T101] # irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:216
[ 4.375558][ T101] Expected irqd_is_activated(data) to be false, but is true
[ 4.376088][ T101] # irq_cpuhotplug_test: EXPECTATION FAILED at kernel/irq/irq_test.c:217
[ 4.376088][ T101] Expected irqd_is_started(data) to be false, but is true
[ 4.377851][ T1] # irq_cpuhotplug_test: pass:0 fail:1 skip:0 total:1
[ 4.377901][ T1] not ok 4 irq_cpuhotplug_test
[ 4.378073][ T1] # irq_test_cases: pass:3 fail:1 skip:0 total:4
Rather than test that PowerPC performs migration the same way as the
unterrupt core, just drop the state checks. The point of the test was to
ensure that the code kept |depth| balanced, which still can be tested for.
Fixes: 66067c3c8a ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/all/20250822190140.2154646-6-briannorris@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c888bc86d ]
Some architectures have a static interrupt layout, with a limited number of
interrupts. Without SPARSE_IRQ, the test may not be able to allocate any
fake interrupts, and the test will fail. (This occurs on ARCH=m68k, for
example.)
Additionally, managed-affinity is only supported with CONFIG_SPARSE_IRQ=y,
so irq_shutdown_depth_test() and irq_cpuhotplug_test() would fail without
it.
Add a 'SPARSE_IRQ' dependency to avoid these problems.
Many architectures 'select SPARSE_IRQ', so this is easy to miss.
Notably, this also excludes ARCH=um from running any of these tests, even
though some of them might work.
Fixes: 66067c3c8a ("genirq: Add kunit tests for depth counts")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/all/20250822190140.2154646-5-briannorris@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9163915a9 ]
The new irq KUnit tests fail on some architectures (notably PowerPC and
32-bit ARM), as the request_irq() call fails due to the ARCH_IRQ_INIT_FLAGS
containing IRQ_NOREQUEST, yielding the following errors:
[10:17:45] # irq_free_disabled_test: EXPECTATION FAILED at kernel/irq/irq_test.c:88
[10:17:45] Expected ret == 0, but
[10:17:45] ret == -22 (0xffffffffffffffea)
[10:17:45] # irq_free_disabled_test: EXPECTATION FAILED at kernel/irq/irq_test.c:90
[10:17:45] Expected desc->depth == 0, but
[10:17:45] desc->depth == 1 (0x1)
[10:17:45] # irq_free_disabled_test: EXPECTATION FAILED at kernel/irq/irq_test.c:93
[10:17:45] Expected desc->depth == 1, but
[10:17:45] desc->depth == 2 (0x2)
By clearing IRQ_NOREQUEST from the interrupt descriptor, these tests now
pass on ARM and PowerPC.
Fixes: 66067c3c8a ("genirq: Add kunit tests for depth counts")
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/all/20250816094528.3560222-2-davidgow@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ed4607327 ]
Add various vendor prefixes which are in use in compatible strings
already. These were found by modifying vendor-prefixes.yaml into a
schema to check compatible strings.
The added prefixes doesn't include various duplicate prefixes in use
such as "lge".
Link: https://lore.kernel.org/r/20250821222136.1027269-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b367e60c7 ]
The stm32-i2s binding inherits from the standard audio-graph-port
schema for its 'port' subnode, audio-graph-port requires the use
of the 'dai-format' property. The stm32mp151c-plyaqm dts file was
using the non-standard name 'format'.
Correct the property name to 'dai-format' to fix the dtbs_check
validation error.
Fixes: 9365fa46be ("ARM: dts: stm32: Add Plymovent AQM devicetree")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250830225115.303663-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b4518c99 ]
Change the 'ret' variable in blk_stack_limits() from unsigned int to int,
as it needs to store negative value -1.
Storing the negative error codes in unsigned type, or performing equality
comparisons (e.g., ret == -1), doesn't cause an issue at runtime [1] but
can be confusing. Additionally, assigning negative error codes to unsigned
type may trigger a GCC warning when the -Wsign-conversion flag is enabled.
No effect on runtime.
Link: https://lore.kernel.org/all/x3wogjf6vgpkisdhg3abzrx7v7zktmdnfmqeih5kosszmagqfs@oh3qxrgzkikf/#1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Fixes: fe0b393f2c ("block: Correct handling of bottom device misaligment")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250902130930.68317-1-rongqianfeng@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 727e914bbf ]
For MSI controllers which only support MSI_FLAG_PCI_MSI_MASK_PARENT, the
newly added callback irq_startup() and irq_shutdown() for
pci_msi[x]_template will not unmask or mask the interrupt when startup()
resp. shutdown() is invoked. This prevents the interrupt from being
enabled resp. disabled.
Invoke irq_[un]mask_parent() in cond_[startup|shutdown]_parent(), when the
interrupt has the MSI_FLAG_PCI_MSI_MASK_PARENT flag set.
Fixes: 54f45a30c0 ("PCI/MSI: Add startup/shutdown for per device domains")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Wei Fang <wei.fang@nxp.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox/SG2042
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250827230943.17829-1-inochiama@gmail.com
Closes: https://lore.kernel.org/regressions/aK4O7Hl8NCVEMznB@monster/
Closes: https://lore.kernel.org/regressions/20250826220959.GA4119563@ax162/
Closes: https://lore.kernel.org/all/20250827093911.1218640-1-wei.fang@nxp.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6058316d1 ]
Memory programming doesn't work for devices without page support.
For example, LP5562 has 3 engines but doesn't support pages,
the start address is changed depending on engine number.
According to datasheet [1], the PROG MEM register addresses for each
engine are as follows:
Engine 1: 0x10
Engine 2: 0x30
Engine 3: 0x50
However, the current implementation incorrectly calculates the address
of PROG MEM register using the engine index starting from 1:
prog_mem_base = 0x10
LP55xx_BYTES_PER_PAGE = 0x20
Engine 1: 0x10 + 0x20 * 1 = 0x30
Engine 2: 0x10 + 0x20 * 2 = 0x50
Engine 3: 0x10 + 0x20 * 3 = 0x70
This results in writing to the wrong engine memory, causing pattern
programming to fail.
To correct it, the engine index should be decreased:
Engine 1: 0x10 + 0x20 * 0 = 0x10
Engine 2: 0x10 + 0x20 * 1 = 0x30
Engine 3: 0x10 + 0x20 * 2 = 0x50
1 - https://www.ti.com/lit/ds/symlink/lp5562.pdf
Fixes: 31379a57cf ("leds: leds-lp55xx: Generalize update_program_memory function")
Signed-off-by: Andrei Lalaev <andrei.lalaev@anton-paar.com>
Link: https://lore.kernel.org/r/20250820-lp5562-prog-mem-address-v1-1-8569647fa71d@anton-paar.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d33ce3634 ]
The expect non-zero macro was incorrect and never used. Fix its
definition.
Fixes: 362aecb2d8 ("selftests/nolibc: add basic infrastructure to ease creation of nolibc tests")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://lore.kernel.org/r/20250731201225.323254-2-benjamin@sipsolutions.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1ff0e2d13 ]
dup2() allows both 'old' and 'new' to have the same value, which dup3()
does not. If libc dup2() is implemented through the dup3() system call,
then it would incorrectly fail in this case.
Avoid the error by handling old == new explicitly.
Fixes: 30ca20517a ("tools headers: Move the nolibc header from rcutorture to tools/include/nolibc/")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250820-nolibc-dup2-einval-v2-1-807185a45c56@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8e2f91999 ]
The "Memory out of range" subtest of futex_numa_mpol assumes that memory
access outside of the mmap'ed area is invalid. That may not be the case
depending on the actual memory layout of the test application. When that
subtest was run on an x86-64 system with latest upstream kernel, the test
passed as an error was returned from futex_wake(). On another PowerPC system,
the same subtest failed because futex_wake() returned 0.
Bail out! futex2_wake(64, 0x86) should fail, but didn't
Looking further into the passed subtest on x86-64, it was found that an
-EINVAL was returned instead of -EFAULT. The -EINVAL error was returned
because the node value test with FLAGS_NUMA set failed with a node value
of 0x7f7f. IOW, the futex memory was accessible and futex_wake() failed
because the supposed node number wasn't valid. If that memory location
happens to have a very small value (e.g. 0), the test will pass and no
error will be returned.
Since this subtest is non-deterministic, drop it unless a guard page beyond
the mmap region is explicitly set.
The other problematic test is the "Memory too small" test. The futex_wake()
function returns the -EINVAL error code because the given futex address isn't
8-byte aligned, not because only 4 of the 8 bytes are valid and the other
4 bytes are not. So change the name of this subtest to "Mis-aligned futex" to
reflect the reality.
[ bp: Massage commit message. ]
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/20250827130011.677600-3-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d35d068fb ]
Change the 'ret' variable from u32 to int to store negative error codes or
zero returned by of_property_read_u32().
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but it's ugly as pants. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: 0fbeae70ee ("regulator: add SCMI driver")
Link: https://patch.msgid.link/20250829101411.625214-1-rongqianfeng@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e08cdd604 ]
PCIe `port01` of t8103-j457 (iMac, M1, 2 USB-C ports, 2021) is unused
and disabled. Linux' PCI subsystem assigns the ethernet nic from
`port02` to bus 02. This results into assigning `pcie0_dart_1` from the
disabled port as iommu. The `pcie0_dart_1` instance is disabled and
probably fused off (it is on the M2 Pro Mac mini which has a disabled
PCIe port as well).
Without iommu the ethernet nic is not expected work.
Adjusts the "bus-range" and the PCIe devices "reg" property to PCI
subsystem's bus number.
Fixes: 7c77ab91b3 ("arm64: dts: apple: Add missing M1 (t8103) devices")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-1-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 296302d3d8 ]
The at91_mckx_ps_restore() assembly function is responsible for setting
back MCKx system bus clocks after exiting low power modes.
Fix a typo and use tmp3 variable instead of tmp2 to correctly set MCKx
to previously saved state.
Tmp2 was used without the needed changes in CSS and DIV. Moreover the
required bit 7, telling that MCR register's content is to be changed
(CMD/write), was not set.
Fix function comment to match tmp variables actually used.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Fixes: 28eb1d40fe ("ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes")
Link: https://lore.kernel.org/r/20250827145427.46819-3-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[claudiu.beznea: s/sate/state in commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e62688d58 ]
The -g parameter was meant to the test the immutable global hash instead of the
private hash which has been made immutable. The global hash is tested as part
at the end of the regular test. The immutable private hash been removed.
Remove last traces of the immutable private hash.
Fixes: 16adc7f136 ("selftests/futex: Remove support for IMMUTABLE")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/20250827130011.677600-2-bigeasy@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c7ef92f6d ]
In __blk_mq_update_nr_hw_queues() the return value of
blk_mq_sysfs_register_hctxs() is not checked. If sysfs creation for hctx
fails, later changing the number of hw_queues or removing disk will
trigger the following warning:
kernfs: can not remove 'nr_tags', no directory
WARNING: CPU: 2 PID: 637 at fs/kernfs/dir.c:1707 kernfs_remove_by_name_ns+0x13f/0x160
Call Trace:
remove_files.isra.1+0x38/0xb0
sysfs_remove_group+0x4d/0x100
sysfs_remove_groups+0x31/0x60
__kobject_del+0x23/0xf0
kobject_del+0x17/0x40
blk_mq_unregister_hctx+0x5d/0x80
blk_mq_sysfs_unregister_hctxs+0x94/0xd0
blk_mq_update_nr_hw_queues+0x124/0x760
nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
nullb_device_submit_queues_store+0x92/0x120 [null_blk]
kobjct_del() was called unconditionally even if sysfs creation failed.
Fix it by checkig the kobject creation statusbefore deleting it.
Fixes: 477e19dedc ("blk-mq: adjust debugfs and sysfs register when updating nr_hw_queues")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250826084854.1030545-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f87412d18e ]
Unconditionally clear the TCS_AMC_MODE_TRIGGER bit when a
transaction completes. Previously this bit was only cleared when
a wake TCS was borrowed as an AMC TCS but not for dedicated
AMC TCS. Leaving this bit set for AMC TCS and entering deeper low
power modes can generate a false completion IRQ.
Prevent this scenario by always clearing the TCS_AMC_MODE_TRIGGER
bit upon receiving a completion IRQ.
Fixes: 15b3bf61b8 ("soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250825-rpmh_rsc_change-v1-1-138202c31bf6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0354e81b7b ]
The module export checks are looking for EXPORT_SYMBOL_GPL_FOR_MODULES()
which was renamed to EXPORT_SYMBOL_FOR_MODULES(). Update the checks.
Fixes: 6d3c3ca4c7 ("module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://lore.kernel.org/r/20250825-export_modules_fix-v1-1-5c331e949538@suse.cz
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d8c41816b ]
When using NVME on SG2044, the NVME drvier always complains about "I/O tag
XXX (XXX) QID XX timeout, completion polled", which is caused by the broken
affinity setting mechanism of the sg2042-msi driver.
The PLIC driver can only the set the affinity when enabled, but the
sg2042-msi driver invokes the affinity setter in disabled state, which
causes the change to be lost.
Cure this by implementing the irq_startup()/shutdown() callbacks, which
allow to startup (enabled) the underlying PLIC first.
Fixes: e96b93a97c ("irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller")
Reported-by: Han Gao <rabenda.cn@gmail.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-4-inochiama@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54f45a30c0 ]
As the RISC-V PLIC cannot apply affinity settings without invoking
irq_enable(), it will make the interrupt unavailble when used as an
underlying interrupt chip for the MSI controller.
Implement the irq_startup() and irq_shutdown() callbacks for the PCI MSI
and MSI-X templates.
For chips that specify MSI_FLAG_PCI_MSI_STARTUP_PARENT, the parent startup
and shutdown functions are invoked. That allows the interrupt on the parent
chip to be enabled if the interrupt has not been enabled during
allocation. This is necessary for MSI controllers which use PLIC as
underlying parent interrupt chip.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/all/20250813232835.43458-3-inochiama@gmail.com
Stable-dep-of: 9d8c41816b ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a721a2fee ]
As the MSI controller on SG2044 uses PLIC as the underlying interrupt
controller, it needs to call irq_enable() and irq_disable() to
startup/shutdown interrupts. Otherwise, the MSI interrupt can not be
startup correctly and will not respond any incoming interrupt.
Introduce irq_chip_startup_parent() and irq_chip_shutdown_parent() to allow
the interrupt controller to call the irq_startup()/irq_shutdown() callbacks
of the parent interrupt chip.
In case the irq_startup()/irq_shutdown() callbacks are not implemented for
the parent interrupt chip, this will fallback to irq_chip_enable_parent()
or irq_chip_disable_parent().
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # Pioneerbox
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://lore.kernel.org/all/20250813232835.43458-2-inochiama@gmail.com
Link: https://lore.kernel.org/lkml/20250722224513.22125-1-inochiama@gmail.com/
Stable-dep-of: 9d8c41816b ("irqchip/sg2042-msi: Fix broken affinity setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11b3de1c03 ]
The cpuidle device's memory is leaked when cpuidle device registration
fails in acpi_processor_power_init(). Free it as appropriate.
Fixes: 3d339dcbb5 ("cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure")
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Link: https://patch.msgid.link/20250728070612.1260859-2-lihuisong@huawei.com
[ rjw: Changed the order of the new statements, added empty line after if () ]
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4223bf833c ]
Now BPF program will run with migration disabled, so it is safe
to access this_cpu_inc_return(bpf_bprintf_nest_level).
Fixes: d9c9e4db18 ("bpf: Factorize bpf_trace_printk and bpf_seq_printf")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250819125638.2544715-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fdaf3b183 ]
According to the imx95 RM, the lpuart7 rx and tx DMA's srcid are 88 and 87,
and the lpuart8 rx and tx DMA's srcid are 90 and 89. So correct them.
Fixes: 915fd2e127 ("arm64: dts: imx95: add edma[1..3] nodes")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94737568b ]
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8faa8a466 ]
After commit 20bda12a0e (“firmware: arm_scmi: Make VirtIO transport a
standalone driver”), the VirtIO transport probes independently. During
scmi_virtio_probe, scmi_probe() is called, which intune invokes
scmi_protocol_acquire() that sends a message over the virtqueue and
waits for a reply.
Previously, DRIVER_OK was only set after scmi_vio_probe, in the core
virtio via virtio_dev_probe(). According to the Virtio spec (3.1 Device
Initialization):
| The driver MUST NOT send any buffer available notifications to the
| device before setting DRIVER_OK.
Some type-1 hypervisors block available-buffer notifications until the
driver is marked OK. In such cases, scmi_vio_probe stalls in
scmi_wait_for_reply(), and the probe never completes.
Resolve this by setting DRIVER_OK immediately after the device-specific
setup, so scmi_probe() can safely send notifications.
Note after splitting the transports into modules, the probe sequence
changed a bit. We can no longer rely on virtio_device_ready() being
called by the core in virtio_dev_probe(), because scmi_vio_probe()
doesn’t complete until the core SCMI stack runs scmi_probe(), which
immediately issues the initial BASE protocol exchanges.
Fixes: 20bda12a0e ("firmware: arm_scmi: Make VirtIO transport a standalone driver")
Signed-off-by: Junnan Wu <junnan01.wu@samsung.com>
Message-Id: <20250812075343.3201365-1-junnan01.wu@samsung.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d1e3aa282 ]
The Retronix R-Car V4H Sparrow Hawk EVTB1 uses 1V8 IO voltage supply
for VDDQ18_25_AVB power rail. Update the AVB0 pinmux to reflect the
change in IO voltage. Since the VDDQ18_25_AVB power rail is shared,
all four AVB0, AVB1, AVB2, TSN0 PFC/GPIO POC[7..4] registers have to
be configured the same way. As the EVTA1 boards are from a limited run
and generally not available, update the DT to make it compatible with
EVTB1 IO voltage settings.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806192821.133302-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae95807b00 ]
Invert the polarity of microSD voltage selector on Retronix R-Car V4H
Sparrow Hawk board. The voltage selector was not populated on prototype
EVTA1 boards, and is implemented slightly different on EVTB1 boards. As
the EVTA1 boards are from a limited run and generally not available,
update the DT to make it compatible with EVTB1 microSD voltage selector.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250727235905.290427-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd5d4621ba ]
Broadcom STB platforms were early adopters (2017) of the SCMI framework and as
a result, not all deployed systems have a Device Tree entry where SCMI
protocol 0x13 (PERFORMANCE) is declared as a clock provider, nor are the
CPU Device Tree node(s) referencing protocol 0x13 as their clock
provider. This was clarified in commit e11c480b6d ("dt-bindings:
firmware: arm,scmi: Extend bindings for protocol@13") in 2023.
For those platforms, we allow the checks done by scmi_dev_used_by_cpus()
to continue, and in the event of not having done an early return, we key
off the documented compatible string and give them a pass to continue to
use scmi-cpufreq.
Fixes: 6c9bb86922 ("cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc3905a71f ]
The tailcall_bpf2bpf_hierarchy_fentry test hangs on s390. Its call
graph is as follows:
entry()
subprog_tail()
trampoline()
fentry()
the rest of subprog_tail() # via BPF_TRAMP_F_CALL_ORIG
return to entry()
The problem is that the rest of subprog_tail() increments the tail call
counter, but the trampoline discards the incremented value. This
results in an astronomically large number of tail calls.
Fix by making the trampoline write the incremented tail call counter
back.
Fixes: 528eb2cb87 ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-4-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c861a6b147 ]
The tailcall_bpf2bpf_hierarchy_1 test hangs on s390. Its call graph is
as follows:
entry()
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
subprog_tail()
bpf_tail_call_static(0) -> entry + tail_call_start
entry() copies its tail call counter to the subprog_tail()'s frame,
which then increments it. However, the incremented result is discarded,
leading to an astronomically large number of tail calls.
Fix by writing the incremented counter back to the entry()'s frame.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-3-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eada40e057 ]
Only BPF functions make use of the tail call counter; helpers and
kfuncs ignore and most likely also clobber it. Writing it into these
functions' frames is pointless and misleading, so do not do it.
Fixes: dd691e847d ("s390/bpf: Implement bpf_jit_supports_subprog_tailcalls()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20250813121016.163375-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5974e8f6c3 ]
There is a register to clamp the flash current per LED channel when
safety timer is disabled. It needs to be updated according to the
maximum torch LED current setting to ensure the torch current won't
be clamped unexpectedly.
Fixes: 96a2e242a5 ("leds: flash: Add driver to support flash LED module in QCOM PMICs")
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250729-fix-torch-clamp-issue-v2-1-9b83816437a3@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e3779e3c6 ]
Coverity noticed that assigning value -EINVAL to 'ret' in the if
statement is useless because 'ret' is overwritten a few lines later.
However, after inspect the code, this warning reveals that we need to
return -EINVAL instead of the variable assignment. So, fix it.
Coverity-id: 1646104
Fixes: aebb5fc9a0 ("leds: max77705: Add LEDs support")
Signed-off-by: Len Bao <len.bao@gmx.us>
Link: https://lore.kernel.org/r/20250727075649.34496-1-len.bao@gmx.us
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1201f6fb5b ]
clock_nanosleep() returns a positive error value. Unlike other libc
functions it *does not* return -1 nor set errno.
Fix the return value and also adapt nanosleep().
Fixes: 7c02bc4088 ("tools/nolibc: add support for clock_nanosleep() and nanosleep()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250731-nolibc-clock_nanosleep-ret-v1-1-9e4af7855e61@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c6b4146de ]
Previously, re-using pinned DEVMAP maps would always fail, because
get_map_info on a DEVMAP always returns flags with BPF_F_RDONLY_PROG set,
but BPF_F_RDONLY_PROG being set on a map during creation is invalid.
Thus, ignore the BPF_F_RDONLY_PROG flag in the flags returned from
get_map_info when checking for compatibility with an existing DEVMAP.
The same problem is handled in a third-party ebpf library:
- https://github.com/cilium/ebpf/issues/925
- https://github.com/cilium/ebpf/pull/930
Fixes: 0cdbb4b09a ("devmap: Allow map lookups from eBPF")
Signed-off-by: Yureka Lilian <yuka@yuka.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814180113.1245565-3-yuka@yuka.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abdaf49be5 ]
Graph tracer framework ensures we won't migrate, kprobe_multi_link_prog_run
called all the way from graph tracer, which disables preemption in
function_graph_enter_regs, as Jiri and Yonghong suggested, there is no
need to use migrate_disable. As a result, some overhead may will be reduced.
And add cant_sleep check for __this_cpu_inc_return.
Fixes: 0dcac27254 ("bpf: Add multi kprobe link")
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250814121430.2347454-1-chen.dylane@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
