Two issues existed:
1) Configs that support DRR, but have it disabled will fail subvp+vblank
validation incorrectly. Use subvp+vblank path for this case.
2) Configs that support DRR and have it enabled can use higher voltage level
than required if they also support subvp+vblank. Use lowest supported voltage
level for this case.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This tab was deleted accidentally and triggers a Smatch warning:
drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c:1006 gfx_v8_0_init_microcode()
warn: inconsistent indenting
Add it back.
Fixes: 0aaafb7359 ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX8")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for wrapper settings for DSI bridge on j721e. Also enable
DPI0
--------------- -----------------------
| -------| |------- |
| DSS | DPI2 |----->| DPI0 | DSI Wrapper |
| -------| |------- |
--------------- -----------------------
As shown above DPI2 output of DSS is connected to DPI0 input of DSI
Wrapper, DSI wrapper gives control wheather to enable/disable DPI0
input. In j721e above is the only configuration supported
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-6-r-ravikumar@ti.com
Create a header file for cdns dsi and move structure definations to
prepare for adding j721e wrapper support
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-5-r-ravikumar@ti.com
Move the cadence dsi bridge under drm/bridge/cadence directory, to
prepare for adding j721e wrapper support
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-4-r-ravikumar@ti.com
Add compatible to support dsi bridge on j721e
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-3-r-ravikumar@ti.com
Convert cdns,dsi.txt binding to yaml format
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103101951.10963-2-r-ravikumar@ti.com
Add 4th pipe and extend TGL Wa_16013835468 to support ADLP, MTL and
DG2 and all TGL steppings.
BSpec: 54369, 55378, 66624
v3:
- commit message modified
v2:
- apply for PSR1 as well
- remove stepping information from comments
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230105065637.2063311-1-jouni.hogander@intel.com
On MIPS, vmap() and vunmap() are undeclared in ttm_bo_util.c. An
error message is shown below.
CC drivers/gpu/drm/ttm/ttm_bo_util.o
../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kmap_ttm':
../drivers/gpu/drm/ttm/ttm_bo_util.c:364:32: error: implicit declaration of function 'vmap'; did you mean 'kmap'? [-Werror=implicit-function-declaration]
364 | map->virtual = vmap(ttm->pages + start_page, num_pages,
| ^~~~
| kmap
../drivers/gpu/drm/ttm/ttm_bo_util.c:364:30: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
364 | map->virtual = vmap(ttm->pages + start_page, num_pages,
| ^
../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_kunmap':
../drivers/gpu/drm/ttm/ttm_bo_util.c:429:17: error: implicit declaration of function 'vunmap'; did you mean 'kunmap'? [-Werror=implicit-function-declaration]
429 | vunmap(map->virtual);
| ^~~~~~
| kunmap
../drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_vmap':
../drivers/gpu/drm/ttm/ttm_bo_util.c:509:23: warning: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
509 | vaddr = vmap(ttm->pages, ttm->num_pages, 0, prot);
| ^
Fix this by including <linux/vmalloc.h>.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230116121023.14245-1-tzimmermann@suse.de
Zero-length arrays are deprecated[1] and are being replaced with
flexible array members in support of the ongoing efforts to tighten the
FORTIFY_SOURCE routines on memcpy(), correctly instrument array indexing
with UBSAN_BOUNDS, and to globally enable -fstrict-flex-arrays=3.
Replace zero-length array with flexible-array member.
This results in no differences in binary output.
[1] https://github.com/KSPP/linux/issues/78
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gourav Samaiya <gsamaiya@nvidia.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103234835.never.378-kees@kernel.org
The current CLRSIPO count is still marginal and does not work with high
DSI clock rates in burst mode. Increase it further to allow the DSI link
to work at up to 1Gbps lane speed. This returns the counts to defaults
as provided by datasheet.
Fixes: ea6490b022 ("drm/bridge: tc358767: increase CLRSIPO count")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmPAA0AACgkQaA3BHVML
eiMKNAgAoXCFd7YMKoHSDlmAOztP+0qdZWM1LkpyC3fTpYbbNC1xI8yn7TVZIbgY
qtkceCUAGmzuO5kTo0aSZdgPWvdWCuDmYBQsX/VwACchSA0aOKZcCaqXGi2Y39D6
G4xsHJyRhU/lWzn/GZQ4+l46m6NAlnrLFBfuLlOHDhYtYZq9D8gXEDm7NSl8/HGF
OjtfSFINKKtOCjvi5GAa8CfnE8GVp59paFKJuj8xU6Dqqlorff+XroWkQG8LV4qi
3UyShQL6d/2hiRQ7fIhXEGCKit7rJkEpfsLvSqJkTkzOKyjhnIZbJIuesgqhtbEH
OpWsmUVKNphi0Y5zw5ZiTqrSy0Py7g==
=+mHi
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2023-01-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.3:
UAPI Changes:
* fourcc: Document Open Source user waiver
Cross-subsystem Changes:
* firmware: fix color-format selection for system framebuffers
Core Changes:
* format-helper: Add conversion from XRGB8888 to various sysfb formats;
Make XRGB8888 the only driver-emulated legacy format
* fb-helper: Avoid blank consoles from selecting an incorrect color format
* probe-helper: Enable/disable HPD on connectors plus driver updates
* Use drm_dbg_ helpers in several places
* docs: Document defaults for CRTC backgrounds; Document use of drm_minor
Driver Changes:
* arm/hdlcd: Use new debugfs helpers
* gud: Use new debugfs helpers
* panel: Support Visionox VTDR6130 AMOLED DSI; Support Himax HX8394; Convert
many drivers to common generic DSI write-sequence helper
* v3d: Do not opencode drm_gem_object_lookup()
* vc4: Various HVS an CRTC fixes
* vkms: Fix SEGFAULT from incorrect GEM-buffer mapping
* Convert various drivers to i2c probe_new()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y8ADeSzZDj+tpibF@linux-uq9g
amd-drm-next-6.3-2023-01-13:
amdgpu:
- Fix possible segfault in failure case
- Rework FW requests to happen in early_init for all IPs so
that we don't lose the sbios console if FW is missing
- PSR fixes
- Misc cleanups
- Unload fix
- SMU13 fixes
amdkfd:
- Fix for cleared VRAM BOs
- Fix cleanup if GPUVM creation fails
- Memory accounting fix
- Use resource_size rather than open codeing it
- GC11 mGPU fix
radeon:
- Fix memory leak on shutdown
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113225911.7776-1-alexander.deucher@amd.com
[WHY]
Last PR missed name of a struct to match in DMUB
[HOW]
Update the logic in dmub_cmh.h header
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SDMA0_CNTL and MMHUB system aperture related registers are blocked by L1 Policy.
Therefore, they cannot be accessed by VF and loged in violation.
[How]
For MMHUB registers, they will be programmed by PF. So VF will skip to program them in mmhubv3_0.
For SDMA0_CNTL which is a PF_only register, VF don't need to program it in sdma_v6_0.
Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support RAS fatal error mode1 reset on smu v13_0_0 and v13_0_10.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From smu firmware,the value of power is transferred in units of watts.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2321
Fixes: 137aac26a2 ("drm/amdgpu/smu12: fix power reporting on renoir")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some dead code was introduced as part of utilizing the `amdgpu_ucode_*`
helpers. Adjust the control flow to make sure that firmware is released
in the appropriate error flows.
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1530548 ("Control flow issues")
Fixes: ec787deb2d ("drm/amd: Use `amdgpu_ucode_*` helpers for GFX9")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Moving dpcd logic from dc_link_dpcd to link_dpcd as part of link file
restructure
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. Move dd_link_ddc functions to link_ddc.
2. Move link ddc functions declaration exposed in dc to link.h
3. Move link ddc functions declaration exposed in dm to dc_link.h
4. Remove i2caux_interface.h file
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Factor out hpd handling logic from generic dc link file.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
FIFO enable sequence is incomplete as it is currently implemented in FW,
and requires reset to prevent the FIFO to be enabled in an invalid
state. This cannot be done until DIG FE is connected to the BE.
[HOW?]
Add FIFO enable sequence in driver for dcn32 with reset after DIG FE is
connected to BE.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DPIA link encoder (DIG) was not released when a Display XDR 6K
monitor was disconnected. That's because the DPIA link encoder logic
checked the BW when it removed the link encoder for it. And the timing
BW was less than DP link BW. So, it failed to release the link encoder.
And that caused the DIG was occupied and can't be used. The reason it
checked the BW is it wants to identify whether this link was using DIG
or HPO. It skips if it's not DIG.
[How]
Not to check the BW when it removes the link encoder because it's
already in the assignment table, it must be the DIG.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A previous fix attempted to correct mismatch between DM display
targets and dc panel instancing by only counting connected panels.
This behaviour breaks a feature, thus this is an alternative solution
that allows mapping display targets to dc links during mod_power_create.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1b5d0e7e15.
It caused corruption in some media players.
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After introducing new DPIA NOTIFICATION we will need
to update the exiting BW allocation logic
[HOW]
Updated the BW alloc source and header files
Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit fixes memory leakage in dc_construct_ctx() function.
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A logical evaluation already results in bool. There is no need for using
a ternary operator based evaluation and bool conversion of the outcome.
Issue identified using boolconv.cocci Coccinelle semantic patch.
This was also reported by the Kernel Test Robot. Hence
Fixes: 473683a034 ("drm/amd/display: Create a file dedicated for CRTC")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The assignment of the else and if branches is the same, so the if else
here is redundant, so we remove it.
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:1951:2-4: WARNING: possible condition with no effect (if == else).
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3719
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On DCN314 when resuming from s0i3 an ASSERT is shown indicating that
`VBIOSSMC_MSG_SetHardMinDcfclkByFreq` returned `VBIOSSMC_Result_Failed`.
This isn't a driver bug; it's a BIOS/configuration bug. To make this
easier to triage, add an explicit warning when this issue happens.
This matches the behavior utilized for failures with
`VBIOSSMC_MSG_TransferTableDram2Smu` configuration.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Setting scaling does not correctly update CRTC state. As a result
dc stream state's src (composition area) && dest (addressable area)
was not calculated as expected. This causes set scaling doesn's work.
[How]
Correctly update CRTC state when setting scaling property.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hongao <hongao@uniontech.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is possible that adev->dm.dc->caps.max_links is greater than
AMDGPU_MAX_CRTCS. So, to not potentially access unallocated memory use
adev->mode_info.num_crtc to do the bounds check instead of
adev->dm.dc->caps.max_links.
Fixes: 1b11ff764a ("drm/amd/display: Implement multiple secure display")
Fixes: b8ff7e08ba ("drm/amd/display: Fix when disabling secure_display")
Reviewed-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5d26e924ec8dea21925c77fa79a2bf2a34cef705.1673451705.git.drv@mailo.com
Using DEFINE_SIMPLE_ATTRIBUTE macro with the debugfs_create_file()
function adds the overhead of introducing a proxy file operation
functions to wrap the original read/write inside file removal protection
functions. This adds significant overhead in terms of introducing and
managing the proxy factory file operations structure and function
wrapping at runtime.
As a replacement, a combination of DEFINE_DEBUGFS_ATTRIBUTE macro paired
with debugfs_create_file_unsafe() is suggested to be used instead. The
DEFINE_DEBUGFS_ATTRIBUTE utilises debugfs_file_get() and
debugfs_file_put() wrappers to protect the original read and write
function calls for the debug attributes. There is no need for any
runtime proxy file operations to be managed by the debugfs core.
Following coccicheck make command helped identify this change:
make coccicheck M=drivers/gpu/drm/i915/ MODE=patch COCCI=./scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9e08dd1b5fabf3e4f54dda27dd1d6ea1dbe6c542.1673451705.git.drv@mailo.com
The caller should more or less know how many DSB commands it
wants to emit into the command buffer, so allow it to specify
the size of the command buffer rather than having the low level
DSB code guess it.
Technically we can emit as many as 134+1033 (for adl+ degamma +
10bit gamma) register writes but thanks to the DSB indexed register
write command we get significant space savings so the current size
estimate of 8KiB (~1024 DSB commands) is sufficient for now.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-11-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
The DSB indexed register write insturction is purely an internal
DSB implementation detail, no reason why the caller should have to
know about it. So let's just have the caller emit blind register
writes let the DSB code convert things to an indexed write if/when
multiple writes occur to the same register offset in a row.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-9-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Currently intel_dsb_indexed_reg_write() just assumes the previous
instructions is also an indexed register write, and thus only
checks the register offset. Make the check more robust by
actually checking the instruction opcode as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-8-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
free_pos is in dwords, DSB_BUF_SIZE in bytes. Directly
comparing the two is nonsense. Fix it up, and make sure
we also account for the 8byte alignment requirement for
each instruction, and also assume that each instruction
normally eats two dwords.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216003810.13338-5-ville.syrjala@linux.intel.com
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
