commit a04ea57aae upstream.
The device bus LAN ID was obtained from PCI_FUNC(), but when a PF
port is passthrough to a virtual machine, the function number may not
match the actual port index on the device. This could cause the driver
to perform operations such as LAN reset on the wrong port.
Fix this by reading the LAN ID from port status register.
Fixes: a34b3e6ed8 ("net: txgbe: Store PCI info")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/B60A670C1F52CB8E+20251104062321.40059-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa997d2d2a upstream.
The function ring_buffer_map_get_reader() is a bit more strict than the
other get reader functions, and except for certain situations the
rb_get_reader_page() should not return NULL. If it does, it triggers a
warning.
This warning was triggering but after looking at why, it was because
another acceptable situation was happening and it wasn't checked for.
If the reader catches up to the writer and there's still data to be read
on the reader page, then the rb_get_reader_page() will return NULL as
there's no new page to get.
In this situation, the reader page should not be updated and no warning
should trigger.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Reported-by: syzbot+92a3745cea5ec6360309@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/690babec.050a0220.baf87.0064.GAE@google.com/
Link: https://lore.kernel.org/20251016132848.1b11bb37@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27afd6e066 upstream.
vb2_ioctl_remove_bufs() call manipulates queue internal buffer list,
potentially overwriting some pointers used by the legacy fileio access
mode. Forbid that ioctl when fileio is active to protect internal queue
state between subsequent read/write calls.
CC: stable@vger.kernel.org
Fixes: a3293a8538 ("media: v4l2: Add REMOVE_BUFS ioctl")
Reported-by: Shuangpeng Bai <SJB7183@psu.edu>
Closes: https://lore.kernel.org/linux-media/5317B590-AAB4-4F17-8EA1-621965886D49@psu.edu/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 758dbc756a upstream.
Some devices, like the Grandstream GUV3100 webcam, have an invalid UVC
descriptor where multiple entities share the same ID, this is invalid
and makes it impossible to make a proper entity tree without heuristics.
We have recently introduced a change in the way that we handle invalid
entities that has caused a regression on broken devices.
Implement a new heuristic to handle these devices properly.
Reported-by: Angel4005 <ooara1337@gmail.com>
Closes: https://lore.kernel.org/linux-media/CAOzBiVuS7ygUjjhCbyWg-KiNx+HFTYnqH5+GJhd6cYsNLT=DaA@mail.gmail.com/
Fixes: 0e2ee70291 ("media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2618849f31 upstream.
[BUG]
During development of a minor feature (make sure all btrfs_bio::end_io()
is called in task context), I noticed a crash in generic/388, where
metadata writes triggered new works after btrfs_stop_all_workers().
It turns out that it can even happen without any code modification, just
using RAID5 for metadata and the same workload from generic/388 is going
to trigger the use-after-free.
[CAUSE]
If btrfs hits an error, the fs is marked as error, no new
transaction is allowed thus metadata is in a frozen state.
But there are some metadata modifications before that error, and they are
still in the btree inode page cache.
Since there will be no real transaction commit, all those dirty folios
are just kept as is in the page cache, and they can not be invalidated
by invalidate_inode_pages2() call inside close_ctree(), because they are
dirty.
And finally after btrfs_stop_all_workers(), we call iput() on btree
inode, which triggers writeback of those dirty metadata.
And if the fs is using RAID56 metadata, this will trigger RMW and queue
new works into rmw_workers, which is already stopped, causing warning
from queue_work() and use-after-free.
[FIX]
Add a special handling for write_one_eb(), that if the fs is already in
an error state, immediately mark the bbio as failure, instead of really
submitting them.
Then during close_ctree(), iput() will just discard all those dirty
tree blocks without really writing them back, thus no more new jobs for
already stopped-and-freed workqueues.
The extra discard in write_one_eb() also acts as an extra safenet.
E.g. the transaction abort is triggered by some extent/free space
tree corruptions, and since extent/free space tree is already corrupted
some tree blocks may be allocated where they shouldn't be (overwriting
existing tree blocks). In that case writing them back will further
corrupting the fs.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 284922f4c5 ]
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd72baff22 ]
Add an assembly macro to refer runtime cost. It hides linker magic and
makes assembly more readable.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250304153342.2016569-1-kirill.shutemov@linux.intel.com
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91309a7082 ]
This was a suggestion by David Laight, and while I was slightly worried
that some micro-architecture would predict cmov like a conditional
branch, there is little reason to actually believe any core would be
that broken.
Intel documents that their existing cores treat CMOVcc as a data
dependency that will constrain speculation in their "Speculative
Execution Side Channel Mitigations" whitepaper:
"Other instructions such as CMOVcc, AND, ADC, SBB and SETcc can also
be used to prevent bounds check bypass by constraining speculative
execution on current family 6 processors (Intel® Core™, Intel® Atom™,
Intel® Xeon® and Intel® Xeon Phi™ processors)"
and while that leaves the future uarch issues open, that's certainly
true of our traditional SBB usage too.
Any core that predicts CMOV will be unusable for various crypto
algorithms that need data-independent timing stability, so let's just
treat CMOV as the safe choice that simplifies the address masking by
avoiding an extra instruction and doesn't need a temporary register.
Suggested-by: David Laight <David.Laight@aculab.com>
Link: https://www.intel.com/content/dam/develop/external/us/en/documents/336996-speculative-execution-side-channel-mitigations.pdf
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 284922f4c5 ("x86: uaccess: don't use runtime-const rewriting in modules")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22c73d52a6 ]
The mds auth caps check should also validate the
fsname along with the associated caps. Not doing
so would result in applying the mds auth caps of
one fs on to the other fs in a multifs ceph cluster.
The bug causes multiple issues w.r.t user
authentication, following is one such example.
Steps to Reproduce (on vstart cluster):
1. Create two file systems in a cluster, say 'fsname1' and 'fsname2'
2. Authorize read only permission to the user 'client.usr' on fs 'fsname1'
$ceph fs authorize fsname1 client.usr / r
3. Authorize read and write permission to the same user 'client.usr' on fs 'fsname2'
$ceph fs authorize fsname2 client.usr / rw
4. Update the keyring
$ceph auth get client.usr >> ./keyring
With above permssions for the user 'client.usr', following is the
expectation.
a. The 'client.usr' should be able to only read the contents
and not allowed to create or delete files on file system 'fsname1'.
b. The 'client.usr' should be able to read/write on file system 'fsname2'.
But, with this bug, the 'client.usr' is allowed to read/write on file
system 'fsname1'. See below.
5. Mount the file system 'fsname1' with the user 'client.usr'
$sudo bin/mount.ceph usr@.fsname1=/ /kmnt_fsname1_usr/
6. Try creating a file on file system 'fsname1' with user 'client.usr'. This
should fail but passes with this bug.
$touch /kmnt_fsname1_usr/file1
7. Mount the file system 'fsname1' with the user 'client.admin' and create a
file.
$sudo bin/mount.ceph admin@.fsname1=/ /kmnt_fsname1_admin
$echo "data" > /kmnt_fsname1_admin/admin_file1
8. Try removing an existing file on file system 'fsname1' with the user
'client.usr'. This shoudn't succeed but succeeds with the bug.
$rm -f /kmnt_fsname1_usr/admin_file1
For more information, please take a look at the corresponding mds/fuse patch
and tests added by looking into the tracker mentioned below.
v2: Fix a possible null dereference in doutc
v3: Don't store fsname from mdsmap, validate against
ceph_mount_options's fsname and use it
v4: Code refactor, better warning message and
fix possible compiler warning
[ Slava.Dubeyko: "fsname check failed" -> "fsname mismatch" ]
Link: https://tracker.ceph.com/issues/72167
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53db6f25ee ]
The wake_up_bit() is called in ceph_async_unlink_cb(),
wake_async_create_waiters(), and ceph_finish_async_create().
It makes sense to switch on clear_bit() function, because
it makes the code much cleaner and easier to understand.
More important rework is the adding of smp_mb__after_atomic()
memory barrier after the bit modification and before
wake_up_bit() call. It can prevent potential race condition
of accessing the modified bit in other threads. Luckily,
clear_and_wake_up_bit() already implements the required
functionality pattern:
static inline void clear_and_wake_up_bit(int bit, unsigned long *word)
{
clear_bit_unlock(bit, word);
/* See wake_up_bit() for which memory barrier you need to use. */
smp_mb__after_atomic();
wake_up_bit(word, bit);
}
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5824ccba9a ]
The Coverity Scan service has detected potential
race condition in ceph_ioctl_lazyio() [1].
The CID 1591046 contains explanation: "Check of thread-shared
field evades lock acquisition (LOCK_EVASION). Thread1 sets
fmode to a new value. Now the two threads have an inconsistent
view of fmode and updates to fields correlated with fmode
may be lost. The data guarded by this critical section may
be read while in an inconsistent state or modified by multiple
racing threads. In ceph_ioctl_lazyio: Checking the value of
a thread-shared field outside of a locked region to determine
if a locked operation involving that thread shared field
has completed. (CWE-543)".
The patch places fi->fmode field access under ci->i_ceph_lock
protection. Also, it introduces the is_file_already_lazy
variable that is set under the lock and it is checked later
out of scope of critical section.
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1591046
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ed1e29cf ]
The Coverity Scan service has detected the calling of
wait_for_completion_killable() without checking the return
value in ceph_lock_wait_for_completion() [1]. The CID 1636232
defect contains explanation: "If the function returns an error
value, the error value may be mistaken for a normal value.
In ceph_lock_wait_for_completion(): Value returned from
a function is not checked for errors before being used. (CWE-252)".
The patch adds the checking of wait_for_completion_killable()
return value and return the error code from
ceph_lock_wait_for_completion().
[1] https://scan5.scan.coverity.com/#/project-view/64304/10063?selectedIssue=1636232
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7574f30337 ]
If mmap write lock is taken while draining retry fault, mmap write lock
is not released because svm_range_restore_pages calls mmap_read_unlock
then returns. This causes deadlock and system hangs later because mmap
read or write lock cannot be taken.
Downgrade mmap write lock to read lock if draining retry fault fix this
bug.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c4ed5e073 ]
According to I2S specs audio data is sampled on the rising edge of the
clock and it can change on the falling one. When operating in normal mode
this SoC behaves the opposite so a clock polarity inversion is required
in this case.
This was tested on an OdroidC2 (Amlogic S905 SoC) board.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20251007-fix-i2s-polarity-v1-1-86704d9cda10@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66128f4287 ]
On m68k, check_sizetypes in headers_check reports:
./usr/include/asm/bootinfo-amiga.h:17: found __[us]{8,16,32,64} type without #include <linux/types.h>
This header file does not use any of the Linux-specific integer types,
but merely refers to them from comments, so this is a false positive.
As of commit c3a9d74ee4 ("kbuild: uapi: upgrade check_sizetypes()
warning to error"), this check was promoted to an error, breaking m68k
all{mod,yes}config builds.
Fix this by stripping simple comments before looking for Linux-specific
integer types.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/949f096337e28d50510e970ae3ba3ec9c1342ec0.1759753998.git.geert@linux-m68k.org
[nathan: Adjust comment and remove unnecessary escaping from slashes in
regex]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87064da2db ]
When using interrupt pin (INT A) as watchdog output all other
interrupt sources need to be disabled to avoid additional
resets. Resulting INT_A_MASK1 value is 55 (0x37).
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250902182235.6825-1-bruno.thomsen@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3637d34b35 ]
Add bounds checking to prevent writes past framebuffer boundaries when
rendering text near screen edges. Return early if the Y position is off-screen
and clip image height to screen boundary. Break from the rendering loop if the
X position is off-screen. When clipping image width to fit the screen, update
the character count to match the clipped width to prevent buffer size
mismatches.
Without the character count update, bit_putcs_aligned and bit_putcs_unaligned
receive mismatched parameters where the buffer is allocated for the clipped
width but cnt reflects the original larger count, causing out-of-bounds writes.
Reported-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48b0652a95834717f190
Suggested-by: Helge Deller <deller@gmx.de>
Tested-by: syzbot+48b0652a95834717f190@syzkaller.appspotmail.com
Signed-off-by: Albin Babu Varghese <albinbabuvarghese20@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b31f7f725c ]
To make libthermal more cross compile friendly use pkg-config to locate
libnl3. Only if that fails fall back to hardcoded /usr/include/libnl3.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1375152bb0 ]
Instead of preserving mode, timestamp, and owner, for the object files
during installation, just preserve the mode and timestamp.
When installing as root, the installed files should be owned by root.
When installing as user, --preserve=ownership doesn't work anyway. This
makes --preserve=ownership rather pointless.
Signed-off-by: Emil Dahl Juhl <juhl.emildahl@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f38ce0209a ]
small_const_nbits is defined in asm-generic/bitsperlong.h which
bitmap.h uses but doesn't include causing build failures in some build
systems. Add the missing #include.
Note the bitmap.h in tools has diverged from that of the kernel, so no
changes are made there.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jason Xing <kerneljasonxing@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonas Gottlieb <jonas.gottlieb@stackit.cloud>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Maurice Lambert <mauricelambert434@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@nvidia.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yuyang Huang <yuyanghuang@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db740f5689 ]
The atomic instructions sc.q, llacq.{w/d}, screl.{w/d} were newly added
in the LoongArch Reference Manual v1.10, it is necessary to handle them
in insns_not_supported() to avoid putting a breakpoint in the middle of
a ll/sc atomic sequence, otherwise it will loop forever for kprobes and
uprobes.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9f866b2bb ]
fwnode_graph_get_next_subnode() may return fwnode backed by ACPI
device nodes and there has been no check these devices are present
in the system, unlike there has been on fwnode OF backend.
In order to provide consistent behaviour towards callers,
add a check for device presence by introducing
a new function acpi_get_next_present_subnode(), used as the
get_next_child_node() fwnode operation that also checks device
node presence.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20251001102636.1272722-2-sakari.ailus@linux.intel.com
[ rjw: Kerneldoc comment and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 558ae45798 ]
When a UTP error occurs in isolation, UFS is not currently recoverable.
This is because the UTP error is not considered fatal in the error
handling code, leading to either an I/O timeout or an OCS error.
Add the UTP error flag to INT_FATAL_ERRORS so the controller will be
reset in this situation.
sd 0:0:0:0: [sda] tag#38 UNKNOWN(0x2003) Result: hostbyte=0x07
driverbyte=DRIVER_OK cmd_age=0s
sd 0:0:0:0: [sda] tag#38 CDB: opcode=0x28 28 00 00 51 24 e2 00 00 08 00
I/O error, dev sda, sector 42542864 op 0x0:(READ) flags 0x80700 phys_seg
8 prio class 2
OCS error from controller = 9 for tag 39
pa_err[1] = 0x80000010 at 2667224756 us
pa_err: total cnt=2
dl_err[0] = 0x80000002 at 2667148060 us
dl_err[1] = 0x80002000 at 2667282844 us
No record of nl_err
No record of tl_err
No record of dme_err
No record of auto_hibern8_err
fatal_err[0] = 0x804 at 2667282836 us
---------------------------------------------------
REGISTER
---------------------------------------------------
NAME OFFSET VALUE
STD HCI SFR 0xfffffff0 0x0
AHIT 0x18 0x814
INTERRUPT STATUS 0x20 0x1000
INTERRUPT ENABLE 0x24 0x70ef5
[mkp: commit desc]
Signed-off-by: Hoyoung Seo <hy50.seo@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Message-Id: <20250930061428.617955-1-hy50.seo@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba60189291 ]
During initialization, the EDVD_COREx_VOLT_FREQ registers for some cores
are still at reset values and not reflecting the actual frequency. This
causes get calls to fail. Set all cores to their respective max
frequency during probe to initialize the registers to working values.
Suggested-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 86db0c32f1 ]
caches_show() overwrote its buffer on each iteration,
so only the last cache tag was visible in sysfs output.
Properly append with snprintf(buf + count, …).
Signed-off-by: Randall P. Embry <rpembry@gmail.com>
Message-ID: <20250926-v9fs_misc-v1-2-a8b3907fc04d@codewreck.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ad865862a ]
The NTB epf host driver assumes the BAR number associated with a memory
window is just incremented from the BAR number associated with MW1. This
seems to have been enough so far but this is not really how the endpoint
side work and the two could easily become mis-aligned.
ntb_epf_mw_to_bar() even assumes that the BAR number is the memory window
index + 2, which means the function only returns a proper result if BAR_2
is associated with MW1.
Instead, fully describe and allow arbitrary NTB BAR mapping.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c2e86f7b5 ]
The output clock register offset used in clk_wzrd_register_output_clocks
was incorrectly referencing 0x3C instead of 0x38, which caused
misconfiguration of output dividers on Versal platforms.
Correcting the off-by-one error ensures proper configuration of output
clocks.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18db1ff2de ]
For some of the SCMI based platforms, the oem extended config may be
supported, but not for duty cycle purpose. Skip the duty cycle ops if
err return when trying to get duty cycle info.
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e0d75258b ]
As described in AM335x Errata Advisory 1.0.42, WKUP_DEBUGSS_CLKCTRL
can't be disabled - the clock module will just be stuck in transitioning
state forever, resulting in the following warning message after the wait
loop times out:
l3-aon-clkctrl:0000:0: failed to disable
Just add the clock to enable_init_clks, so no attempt is made to disable
it.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8fe3f07a3 ]
p9_read_work() doesn't set Rworksched and doesn't do schedule_work(m->rq)
if list_empty(&m->req_list).
However, if the pipe is full, we need to read more data and this used to
work prior to commit aaec5a95d5 ("pipe_read: don't wake up the writer
if the pipe is still full").
p9_read_work() does p9_fd_read() -> ... -> anon_pipe_read() which (before
the commit above) triggered the unnecessary wakeup. This wakeup calls
p9_pollwake() which kicks p9_poll_workfn() -> p9_poll_mux(), p9_poll_mux()
will notice EPOLLIN and schedule_work(&m->rq).
This no longer happens after the optimization above, change p9_fd_request()
to use p9_poll_mux() instead of only checking for EPOLLOUT.
Reported-by: syzbot+d1b5dace43896bc386c3@syzkaller.appspotmail.com
Tested-by: syzbot+d1b5dace43896bc386c3@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68a2de8f.050a0220.e29e5.0097.GAE@google.com/
Link: https://lore.kernel.org/all/67dedd2f.050a0220.31a16b.003f.GAE@google.com/
Co-developed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Message-ID: <20250819161013.GB11345@redhat.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af98caeaa7 ]
This register is important for sequencing the commands to PLLs, so
actually write the update bits with regmap_write_bits() instead of
relying on a read/modify/write regmap command that could skip the actual
hardware write if the value is identical to the one read.
It's changed when modification is needed to the PLL, when
read-only operation is done, we could keep the call to
regmap_update_bits().
Add a comment to the sam9x60_div_pll_set_div() function that uses this
PLL_UPDT register so that it's used consistently, according to the
product's datasheet.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Ryan Wanner <ryan.wanner@microchip.com> # on sama7d65 and sam9x75
Link: https://lore.kernel.org/r/20250827150811.82496-1-nicolas.ferre@microchip.com
[claudiu.beznea: fix "Alignment should match open parenthesis"
checkpatch.pl check]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0237f5635 ]
A potential divider for the master clock is div/3. The register
configuration for div/3 is MASTER_PRES_MAX. The current bit shifting
method does not work for this case. Checking for MASTER_PRES_MAX will
ensure the correct decimal value is stored in the system.
Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c01fe4965 ]
Add a new word in assembly to store ACR value during the calls
to at91_plla_disable/at91_plla_enable macros and use it.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
[cristian.birsan@microchip.com: remove ACR_DEFAULT_PLLA loading]
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20250827145427.46819-4-nicolas.ferre@microchip.com
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6f1a4f059 ]
PCF2127 can generate interrupt every full second or minute configured
from control and status register 1, bits MI (1) and SI (0).
On interrupt control register 2 bit MSF (7) is set and must be cleared
to continue normal operation.
While the driver never enables this interrupt on its own, users or
firmware may do so - e.g. as an easy way to test the interrupt.
Add preprocessor definition for MSF bit and include it in the irq
bitmask to ensure minute and second interrupts are cleared when fired.
This fixes an issue where the rtc enters a test mode and becomes
unresponsive after a second interrupt has fired and is not cleared in
time. In this state register writes to control registers have no
effect and the interrupt line is kept asserted [1]:
[1] userspace commands to put rtc into unresponsive state:
$ i2cget -f -y 2 0x51 0x00
0x04
$ i2cset -f -y 2 0x51 0x00 0x05 # set bit 0 SI
$ i2cget -f -y 2 0x51 0x00
0x84 # bit 8 EXT_TEST set
$ i2cset -f -y 2 0x51 0x00 0x05 # try overwrite control register
$ i2cget -f -y 2 0x51 0x00
0x84 # no change
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Link: https://lore.kernel.org/r/20250825-rtc-irq-v1-1-0133319406a7@solid-run.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7aa8781f37 ]
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 725e9d8186 ]
Add the missing option name in the help message. Additionally,
switch to __uml_help(), because this is a global option rather
than a per-channel option.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32058c38d3 ]
The function call new_inode() is a primitive for allocating an inode in memory,
rather than planning disk space for it. Therefore, -ENOMEM should be returned
as the error code rather than -ENOSPC.
To be specific, new_inode()'s call path looks like this:
new_inode
new_inode_pseudo
alloc_inode
ops->alloc_inode (hpfs_alloc_inode)
alloc_inode_sb
kmem_cache_alloc_lru
Therefore, the failure of new_inode() indicates a memory presure issue (-ENOMEM),
not a lack of disk space. However, the current implementation of
hpfs_mkdir/create/mknod/symlink incorrectly returns -ENOSPC when new_inode() fails.
This patch fix this by set err to -ENOMEM before the goto statement.
BTW, we also noticed that other nested calls within these four functions,
like hpfs_alloc_f/dnode and hpfs_add_dirent, might also fail due to memory presure.
But similarly, only -ENOSPC is returned. Addressing these will involve code
modifications in other functions, and we plan to submit dedicated patches for these
issues in the future. For this patch, we focus on new_inode().
Signed-off-by: Yikang Yue <yikangy2@illinois.edu>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f7b168323 ]
Rework nss_port5 to use the new multiple configuration implementation
and correctly fix the clocks for this port under some corner case.
In OpenWrt, this patch avoids intermittent dmesg errors of the form
nss_port5_rx_clk_src: rcg didn't update its configuration.
This is a mechanical, straightforward port of
commit e88f03230d
("clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf")
to gcc-ipq6018, with two conflicts resolved: different frequency of the
P_XO clock source, and only 5 Ethernet ports.
This was originally developed by JiaY-shi <shi05275@163.com>.
Link: https://lore.kernel.org/all/20231220221724.3822-4-ansuelsmth@gmail.com/
Signed-off-by: Marko Mäkelä <marko.makela@iki.fi>
Tested-by: Marko Mäkelä <marko.makela@iki.fi>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250802095546.295448-1-marko.makela@iki.fi
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1a4a59a2 ]
In btrfs_fallocate(), when the allocated range overlaps with a prealloc
extent and the extent starts after i_size, the range doesn't get marked
dirty in file_extent_tree. This results in persisting an incorrect
disk_i_size for the inode when not using the no-holes feature.
This is reproducible since commit 41a2ee75aa ("btrfs: introduce
per-inode file extent tree"), then became hidden since commit 3d7db6e8bd
("btrfs: don't allocate file extent tree for non regular files") and then
visible again after commit 8679d2687c ("btrfs: initialize
inode::file_extent_tree after i_mode has been set"), which fixes the
previous commit.
The following reproducer triggers the problem:
$ cat test.sh
MNT=/mnt/test
DEV=/dev/vdb
mkdir -p $MNT
mkfs.btrfs -f -O ^no-holes $DEV
mount $DEV $MNT
touch $MNT/file1
fallocate -n -o 1M -l 2M $MNT/file1
umount $MNT
mount $DEV $MNT
len=$((1 * 1024 * 1024))
fallocate -o 1M -l $len $MNT/file1
du --bytes $MNT/file1
umount $MNT
mount $DEV $MNT
du --bytes $MNT/file1
umount $MNT
Running the reproducer gives the following result:
$ ./test.sh
(...)
2097152 /mnt/test/file1
1048576 /mnt/test/file1
The difference is exactly 1048576 as we assigned.
Fix by adding a call to btrfs_inode_set_file_extent_range() in
btrfs_fallocate_update_isize().
Fixes: 41a2ee75aa ("btrfs: introduce per-inode file extent tree")
Signed-off-by: austinchang <austinchang@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f260c6aff0 ]
When btrfs_add_qgroup_relation() is called with invalid qgroup levels
(src >= dst), the function returns -EINVAL directly without freeing the
preallocated qgroup_list structure passed by the caller. This causes a
memory leak because the caller unconditionally sets the pointer to NULL
after the call, preventing any cleanup.
The issue occurs because the level validation check happens before the
mutex is acquired and before any error handling path that would free
the prealloc pointer. On this early return, the cleanup code at the
'out' label (which includes kfree(prealloc)) is never reached.
In btrfs_ioctl_qgroup_assign(), the code pattern is:
prealloc = kzalloc(sizeof(*prealloc), GFP_KERNEL);
ret = btrfs_add_qgroup_relation(trans, sa->src, sa->dst, prealloc);
prealloc = NULL; // Always set to NULL regardless of return value
...
kfree(prealloc); // This becomes kfree(NULL), does nothing
When the level check fails, 'prealloc' is never freed by either the
callee or the caller, resulting in a 64-byte memory leak per failed
operation. This can be triggered repeatedly by an unprivileged user
with access to a writable btrfs mount, potentially exhausting kernel
memory.
Fix this by freeing prealloc before the early return, ensuring prealloc
is always freed on all error paths.
Fixes: 4addc1ffd6 ("btrfs: qgroup: preallocate memory before adding a relation")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Shardul Bankar <shardulsb08@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe9622011f ]
When QP wraps around, WQE data from the previous use at the same
position still remains as driver does not clear it. The WQE field
layout differs across different opcodes, causing that the fields
that are not explicitly assigned for the current opcode retain
stale values, and are issued to HW by mistake. Such fields are as
follows:
* MSG_START_SGE_IDX field in ATOMIC WQE
* BLOCK_SIZE and ZBVA fields in FRMR WQE
* DirectWQE fields when DirectWQE not used
For ATOMIC WQE, always set the latest sge index in MSG_START_SGE_IDX
as required by HW.
For FRMR WQE and DirectWQE, clear only those unassigned fields
instead of the entire WQE to avoid performance penalty.
Fixes: 68a997c5d2 ("RDMA/hns: Add FRMR support for hip08")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5a7cbea54 ]
The actual sge number may exceed the value specified in init_attr->cap
when HW needs extra sge to enable inline feature. Since these extra
sges are not expected by ULP, return the user-specified value to ULP
instead of the expanded sge number.
Fixes: 0c5e259b06 ("RDMA/hns: Fix incorrect sge nums calculation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4b67b514a ]
Currently driver enforces affinity between QP cache and send CQ
cache, which helps improve the performance of sending, but doesn't
set affinity with recv CQ cache, resulting in suboptimal performance
of receiving.
Use one CQ bank per context to ensure the affinity among QP, send CQ
and recv CQ. For kernel ULP, CQ bank is fixed to 0.
Fixes: 9e03dbea2b ("RDMA/hns: Fix CQ and QP cache affinity")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20251016114051.1963197-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5575b7646b ]
The driver maintains a CQ table that is used to ensure that a CQ is
still valid when processing CQ related AEs. When a CQ is destroyed,
the table entry is cleared, using irdma_cq.cq_num as the index. This
field was never being set, so it was just always clearing out entry
0.
Additionally, the cq_num field size was increased to accommodate HW
supporting more than 64K CQs.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20250923142439.943930-1-jmoroni@google.com
Acked-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
