Commit graph

505,617 commits

Author SHA1 Message Date
Hui Wang
e8818fa8c0 ALSA: hda/realtek - move DELL2_MIC_NO_PRESENCE quirk for alc292
Cc: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-03 07:32:57 +02:00
Tomi Valkeinen
32797b3e06 video: fix composite video connector compatible string
The quite-recently-added analog-tv-connector bindings say that the
compatible string for composite video connector is
"composite-connector". That string is also used in the omap3-n900.dts
file. However, the connector driver uses "composite-video-connector", so
this has never worked.

While changing the driver's compatible string to "composite-connector"
would be safer, as published DT bindings should not be changed, I'd
rather fix the bindings in this case for two reasons:

* composite-connector is a bit too generic name, as it doesn't even hint
  at video.
* it's clear that this has never worked, which means no one has used
  those bindings, which should make it safe to change this.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2014-09-03 08:28:58 +03:00
Dave Airlie
0977f90679 Merge branch 'vmwgfx-fixes-3.17' of git://people.freedesktop.org/~thomash/linux into drm-fixes
Two vmwgfx fixes, marked for stable as well

* 'vmwgfx-fixes-3.17' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Fix a potential infinite spin waiting for fifo idle
  drm/vmwgfx: Fix an incorrect OOM return value
2014-09-03 13:39:47 +10:00
David Howells
c3ce6dfa48 KEYS: Set pr_fmt() in asymmetric key signature handling
Printing in base signature handling should have a prefix, so set pr_fmt().

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 11:08:45 +10:00
David Howells
0aa0409401 PEFILE: Relax the check on the length of the PKCS#7 cert
Relax the check on the length of the PKCS#7 cert as it appears that the PE
file wrapper size gets rounded up to the nearest 8.

The debugging output looks like this:

	PEFILE: ==> verify_pefile_signature()
	PEFILE: ==> pefile_parse_binary()
	PEFILE: checksum @ 110
	PEFILE: header size = 200
	PEFILE: cert = 968 @547be0 [68 09 00 00 00 02 02 00 30 82 09 56 ]
	PEFILE: sig wrapper = { 968, 200, 2 }
	PEFILE: Signature data not PKCS#7

The wrapper is the first 8 bytes of the hex dump inside [].  This indicates a
length of 0x968 bytes, including the wrapper header - so 0x960 bytes of
payload.

The ASN.1 wrapper begins [ ... 30 82 09 56 ].  That indicates an object of size
0x956 - a four byte discrepency, presumably just padding for alignment
purposes.

So we just check that the ASN.1 container is no bigger than the payload and
reduce the recorded size appropriately.

Whilst we're at it, allow shorter PKCS#7 objects that manage to squeeze within
127 or 255 bytes.  It's just about conceivable if no X.509 certs are included
in the PKCS#7 message.

Reported-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Peter Jones <pjones@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:30:24 +10:00
David Howells
27419604f5 KEYS: Fix use-after-free in assoc_array_gc()
An edit script should be considered inaccessible by a function once it has
called assoc_array_apply_edit() or assoc_array_cancel_edit().

However, assoc_array_gc() is accessing the edit script just after the
gc_complete: label.

Reported-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
cc: shemming@brocade.com
cc: paulmck@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:30:22 +10:00
David Howells
876c6e3e02 KEYS: Fix public_key asymmetric key subtype name
The length of the name of an asymmetric key subtype must be stored in struct
asymmetric_key_subtype::name_len so that it can be matched by a search for
"<subkey_name>:<partial_fingerprint>".  Fix the public_key subtype to have
name_len set.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:27:28 +10:00
Steve Dickson
738c5d190f KEYS: Increase root_maxkeys and root_maxbytes sizes
Now that NFS client uses the kernel key ring facility to store the NFSv4
id/gid mappings, the defaults for root_maxkeys and root_maxbytes need to be
substantially increased.

These values have been soak tested:

	https://bugzilla.redhat.com/show_bug.cgi?id=1033708#c73

Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
2014-09-03 10:27:12 +10:00
Dave Airlie
6ba59f3b5c Merge branch 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux into drm-next
Merge the move to generic fences for TTM using drivers.

* 'for-airlied-next' of git://people.freedesktop.org/~mlankhorst/linux:
  drm/nouveau: use shared fences for readable objects
  drm/nouveau: Keep only a single list for validation.
  drm/ttm: use rcu in core ttm
  drm/vmwgfx: use rcu in vmw_user_dmabuf_synccpu_grab
  drm/radeon: use rcu waits in some ioctls
  drm/nouveau: use rcu in nouveau_gem_ioctl_cpu_prep
  drm/ttm: flip the switch, and convert to dma_fence
  drm/qxl: rework to new fence interface
  drm/nouveau: rework to new fence interface
  drm/vmwgfx: rework to new fence interface, v2
  drm/vmwgfx: get rid of different types of fence_flags entirely
  drm/radeon: use common fence implementation for fences, v4
  drm/ttm: kill off some members to ttm_validate_buffer
  drm/ttm: add interruptible parameter to ttm_eu_reserve_buffers
  drm/ttm: kill fence_lock
  drm/ttm: call ttm_bo_wait while inside a reservation
  drm/nouveau: require reservations for nouveau_fence_sync and nouveau_bo_fence
  drm/nouveau: add reservation to nouveau_gem_ioctl_cpu_prep
2014-09-03 10:12:24 +10:00
Stephen Boyd
d8210e28e5 clk: qcom: Fix sdc 144kHz frequency entry
The pre-divider for the sdc clocks only has 2 bits in it, so we
can't possibly divide by anything larger than 4 here.
Furthermore, we program the value of ~(n - m) and the n value is
larger than 8 bits (max of 256). Replace this entry with 200kHz
which is close enough to 144kHz to be usable.

Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Fixes: 24d8fba44a "clk: qcom: Add support for IPQ8064's global clock controller (GCC)"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 16:52:28 -07:00
Filipe Manana
dac5705cad Btrfs: fix crash while doing a ranged fsync
While doing a ranged fsync, that is, one whose range doesn't cover the
whole possible file range (0 to LLONG_MAX), we can crash under certain
circumstances with a trace like the following:

[41074.641913] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
(...)
[41074.642692] CPU: 0 PID: 24580 Comm: fsx Not tainted 3.16.0-fdm-btrfs-next-45+ #1
(...)
[41074.643886] RIP: 0010:[<ffffffffa01ecc99>]  [<ffffffffa01ecc99>] btrfs_ordered_update_i_size+0x279/0x2b0 [btrfs]
(...)
[41074.644919] Stack:
(...)
[41074.644919] Call Trace:
[41074.644919]  [<ffffffffa01db531>] btrfs_truncate_inode_items+0x3f1/0xa10 [btrfs]
[41074.644919]  [<ffffffffa01eb54f>] ? btrfs_get_logged_extents+0x4f/0x80 [btrfs]
[41074.644919]  [<ffffffffa02137a9>] btrfs_log_inode+0x2f9/0x970 [btrfs]
[41074.644919]  [<ffffffff81090875>] ? sched_clock_local+0x25/0xa0
[41074.644919]  [<ffffffff8164a55e>] ? mutex_unlock+0xe/0x10
[41074.644919]  [<ffffffff810af51d>] ? trace_hardirqs_on+0xd/0x10
[41074.644919]  [<ffffffffa0214b4f>] btrfs_log_inode_parent+0x1ef/0x560 [btrfs]
[41074.644919]  [<ffffffff811d0c55>] ? dget_parent+0x5/0x180
[41074.644919]  [<ffffffffa0215d11>] btrfs_log_dentry_safe+0x51/0x80 [btrfs]
[41074.644919]  [<ffffffffa01e2d1a>] btrfs_sync_file+0x1ba/0x3e0 [btrfs]
[41074.644919]  [<ffffffff811eda6b>] vfs_fsync_range+0x1b/0x30
(...)

The necessary conditions that lead to such crash are:

* an incremental fsync (when the inode doesn't have the
  BTRFS_INODE_NEEDS_FULL_SYNC flag set) happened for our file and it logged
  a file extent item ending at offset X;

* the file got the flag BTRFS_INODE_NEEDS_FULL_SYNC set in its inode, due
  to a file truncate operation that reduces the file to a size smaller
  than X;

* a ranged fsync call happens (via an msync for example), with a range that
  doesn't cover the whole file and the end of this range, lets call it Y, is
  smaller than X;

* btrfs_log_inode, sees the flag BTRFS_INODE_NEEDS_FULL_SYNC set and
  calls btrfs_truncate_inode_items() to remove all items from the log
  tree that are associated with our file;

* btrfs_truncate_inode_items() removes all of the inode's items, and the lowest
  file extent item it removed is the one ending at offset X, where X > 0 and
  X > Y - before returning, it calls btrfs_ordered_update_i_size() with an offset
  parameter set to X;

* btrfs_ordered_update_i_size() sees that X is greater then the current ordered
  size (btrfs_inode's disk_i_size) and then it assumes there can't be any ongoing
  ordered operation with a range covering the offset X, calling a BUG_ON() if
  such ordered operation exists. This assumption is made because the disk_i_size
  is only increased after the corresponding file extent item is added to the
  btree (btrfs_finish_ordered_io);

* But because our fsync covers only a limited range, such an ordered extent might
  exist, and our fsync callback (btrfs_sync_file) doesn't wait for such ordered
  extent to finish when calling btrfs_wait_ordered_range();

And then by the time btrfs_ordered_update_i_size() is called, via:

   btrfs_sync_file() ->
       btrfs_log_dentry_safe() ->
           btrfs_log_inode_parent() ->
               btrfs_log_inode() ->
                   btrfs_truncate_inode_items() ->
                       btrfs_ordered_update_i_size()

We hit the BUG_ON(), which could never happen if the fsync range covered the whole
possible file range (0 to LLONG_MAX), as we would wait for all ordered extents to
finish before calling btrfs_truncate_inode_items().

So just don't call btrfs_ordered_update_i_size() if we're removing the inode's items
from a log tree, which isn't supposed to change the in memory inode's disk_i_size.

Issue found while running xfstests/generic/127 (happens very rarely for me), more
specifically via the fsx calls that use memory mapped IO (and issue msync calls).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-02 16:46:05 -07:00
Filipe Manana
d9f85963e3 Btrfs: fix corruption after write/fsync failure + fsync + log recovery
While writing to a file, in inode.c:cow_file_range() (and same applies to
submit_compressed_extents()), after reserving an extent for the file data,
we create a new extent map for the written range and insert it into the
extent map cache. After that, we create an ordered operation, but if it
fails (due to a transient/temporary-ENOMEM), we return without dropping
that extent map, which points to a reserved extent that is freed when we
return. A subsequent incremental fsync (when the btrfs inode doesn't have
the flag BTRFS_INODE_NEEDS_FULL_SYNC) considers this extent map valid and
logs a file extent item based on that extent map, which points to a disk
extent that doesn't contain valid data - it was freed by us earlier, at this
point it might contain any random/garbage data.

Therefore, if we reach an error condition when cowing a file range after
we added the new extent map to the cache, drop it from the cache before
returning.

Some sequence of steps that lead to this:

    $ mkfs.btrfs -f /dev/sdd
    $ mount -o commit=9999 /dev/sdd /mnt
    $ cd /mnt

    $ xfs_io -f -c "pwrite -S 0x01 -b 4096 0 4096" -c "fsync" foo
    $ xfs_io -c "pwrite -S 0x02 -b 4096 4096 4096"
    $ sync

    $ od -t x1 foo
    0000000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    *
    0010000 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02 02
    *
    0020000

    $ xfs_io -c "pwrite -S 0xa1 -b 4096 0 4096" foo

    # Now this write + fsync fail with -ENOMEM, which was returned by
    # btrfs_add_ordered_extent() in inode.c:cow_file_range().
    $ xfs_io -c "pwrite -S 0xff -b 4096 4096 4096" foo
    $ xfs_io -c "fsync" foo
    fsync: Cannot allocate memory

    # Now do a new write + fsync, which will succeed. Our previous
    # -ENOMEM was a transient/temporary error.
    $ xfs_io -c "pwrite -S 0xee -b 4096 16384 4096" foo
    $ xfs_io -c "fsync" foo

    # Our file content (in page cache) is now:
    $ od -t x1 foo
    0000000 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1
    *
    0010000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    *
    0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    *
    0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
    *
    0050000

    # Now reboot the machine, and mount the fs, so that fsync log replay
    # takes place.

    # The file content is now weird, in particular the first 8Kb, which
    # do not match our data before nor after the sync command above.
    $ od -t x1 foo
    0000000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
    *
    0010000 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01
    *
    0020000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    *
    0040000 ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee ee
    *
    0050000

    # In fact these first 4Kb are a duplicate of the last 4kb block.
    # The last write got an extent map/file extent item that points to
    # the same disk extent that we got in the write+fsync that failed
    # with the -ENOMEM error. btrfs-debug-tree and btrfsck allow us to
    # verify that:

    $ btrfs-debug-tree /dev/sdd
    (...)
	item 6 key (257 EXTENT_DATA 0) itemoff 15819 itemsize 53
		extent data disk byte 12582912 nr 8192
		extent data offset 0 nr 8192 ram 8192
	item 7 key (257 EXTENT_DATA 8192) itemoff 15766 itemsize 53
		extent data disk byte 0 nr 0
		extent data offset 0 nr 8192 ram 8192
	item 8 key (257 EXTENT_DATA 16384) itemoff 15713 itemsize 53
		extent data disk byte 12582912 nr 4096
		extent data offset 0 nr 4096 ram 4096

    $ umount /dev/sdd
    $ btrfsck /dev/sdd
    Checking filesystem on /dev/sdd
    UUID: db5e60e1-050d-41e6-8c7f-3d742dea5d8f
    checking extents
    extent item 12582912 has multiple extent items
    ref mismatch on [12582912 4096] extent item 1, found 2
    Backref bytes do not match extent backref, bytenr=12582912, ref bytes=4096, backref bytes=8192
    backpointer mismatch on [12582912 4096]
    Errors found in extent allocation tree or chunk allocation
    checking free space cache
    checking fs roots
    root 5 inode 257 errors 1000, some csum missing
    found 131074 bytes used err is 1
    total csum bytes: 4
    total tree bytes: 131072
    total fs tree bytes: 32768
    total extent tree bytes: 16384
    btree space waste bytes: 123404
    file data blocks allocated: 274432
     referenced 274432
    Btrfs v3.14.1-96-gcc7fd5a-dirty

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2014-09-02 16:46:05 -07:00
Gabriele Mazzotta
73f1ae8ab0 cpufreq: intel_pstate: Remove unneeded variable
It should have been removed with commit d1b6848590
("cpufreq / intel_pstate: Optimize intel_pstate_set_policy")

Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:31:04 +02:00
Jacob Pan
fcdf1797e1 powercap / RAPL: change domain detection message
Many CPUs do not support complete set of RAPL domains, as a
result this detection failed message is very misleading and
can be annoying.

 [    5.082632] intel_rapl: RAPL domain core detection failed
 [    5.088370] intel_rapl: RAPL domain uncore detection failed

So lower the warning message to info and only print out the RAPL
domains that are supported.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:29:00 +02:00
Jason Baron
64c7569c06 powercap / RAPL: add support for CPU model 0x3f
I've confirmed that monitoring the package power usage as well as setting power
limits appear to be working as expected. Supports the package and dram domains.

Tested aginst cpu:

Intel(R) Xeon(R) CPU E5-2650 v3 @ 2.30GHz

Signed-off-by: Jason Baron <jbaron@akamai.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:28:02 +02:00
Murali Karicheri
b14a3d1784 PCI: designware: Add support for v3.65 hardware
The Keystone PCI controller is based on v3.65 DesignWare hardware.  This
version differs from newer versions of the hardware in functional areas
discussed below that make it necessary to change dw_pcie_host_init() to
support v3.65 based PCI controller.

    1. No support for ATU port.  Any ATU-specific resource handling code is
       to be bypassed for v3.65 h/w.

    2. MSI controller uses application space to implement MSI and 32 MSI
       interrupts are multiplexed over 8 IRQs to the host.  Hence the code
       to process MSI IRQ needs to be different.  This patch allows
       platform driver to provide its own irq_domain_ops ptr to
       irq_domain_add_linear() through an API callback from the DesignWare
       core driver.

    3. MSI interrupt generation requires EP to write to the RC's
       application register.  So enhance the driver to allow setup of
       inbound access to MSI IRQ register as a post scan bus API callback.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Pratyush Anand <pratyush.anand@st.com>
Acked-by: Mohit KUMAR <mohit.kumar@st.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
CC: Santosh Shilimkar <santosh.shilimkar@ti.com>
CC: Russell King <linux@arm.linux.org.uk>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Richard Zhu <r65037@freescale.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Marek Vasut <marex@denx.de>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Pawel Moll <pawel.moll@arm.com>
CC: Mark Rutland <mark.rutland@arm.com>
CC: Ian Campbell <ijc+devicetree@hellion.org.uk>
CC: Kumar Gala <galak@codeaurora.org>
CC: Randy Dunlap <rdunlap@infradead.org>
CC: Grant Likely <grant.likely@linaro.org>
2014-09-02 17:25:41 -06:00
Geert Uytterhoeven
d07e9c178f PM / domains: Make generic_pm_domain.name const
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:25:32 +02:00
Rafael J. Wysocki
62109b4317 PM / sleep: Fix test_suspend= command line option
After commit d431cbc53c (PM / sleep: Simplify sleep states sysfs
interface code) the pm_states[] array is not populated initially,
which causes setup_test_suspend() to always fail and the suspend
testing during boot doesn't work any more.

Fix the problem by using pm_labels[] instead of pm_states[] in
setup_test_suspend() and storing a pointer to the label of the
sleep state to test rather than the number representing it,
because the connection between the state numbers and labels is
only established by suspend_set_ops().

Fixes: d431cbc53c (PM / sleep: Simplify sleep states sysfs interface code)
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:21:03 +02:00
Bob Moore
48c1947c53 ACPICA: Update version to 20140828.
Version 20140828.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:17:42 +02:00
Bob Moore
4cc0909ef2 ACPICA: Disassembler: Fix for gpio_int interrupt polarity flags.
The field is actually 2 bits, not 1.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:17:42 +02:00
Hanjun Guo
34ea065e5e ACPICA: Headers: Add GTDT flag definitions for the timer subtable.
Mostly by Hanjun Guo <hanjun.guo@linaro.org>

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:17:42 +02:00
Hanjun Guo
63b8f8cd67 ACPICA: ACPI 5.1/Disassembler: Add GICC affinity subtable to SRAT table.
Update template for SRAT.
Add clock_domain to standard CPU affinity subtable.

Mostly by Hanjun Guo <hanjun.guo@linaro.org>

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:17:41 +02:00
Bob Moore
36d32314ae ACPICA: Add _PSx names to the METHOD_NAME list.
Will be used by iASL.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:17:41 +02:00
Rafael J. Wysocki
385321e2c6 PCI/PM: Allow PCI devices to be put into D3cold during system suspend
Commit 448bd857d4 ("PCI/PM: add PCIe runtime D3cold support") added a
check to prevent PCI devices from being put into D3cold during system
suspend without giving any particular reason.

Also the check isn't really necessary, because acpi_pci_set_power_state()
maps PCI_D3hot to ACPI_STATE_D3_COLD anyway.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-02 17:13:52 -06:00
Heikki Krogerus
3f56bf3e93 ACPI / LPSS: remove struct lpss_shared_clock
Nothing requires it anymore. The PWM driver no longer
uses clk framework to get the rate.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:12:41 +02:00
Heikki Krogerus
03f09f73bb ACPI / LPSS: support for 133MHz I2C source clock on Baytrail
The I2C controllers on Baytrail can get the clock from
100MHz or 133MHz source clock. The first bits in the private
clock parameter register indicates which one is being used.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:12:41 +02:00
Heikki Krogerus
b0d00f8bd5 ACPI / LPSS: drop clkdev_name member from lpss_device_desc
It was used to provide the correct con_id for the dma
driver, but it's not needed. Even if the driver requests a
clock with the con_id, it still gets the correct clock. The
device name is enough to match a single clock.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:12:41 +02:00
Heikki Krogerus
ff8c1af5e7 ACPI / LPSS: introduce flags
Replace the booleans with a single flags member variable.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-03 01:12:41 +02:00
Rafael J. Wysocki
fe9a743a26 PCI/PM: Drop unused runtime PM support code for PCIe ports
Since commit de7d5f729c ("PCI/PM: Disable runtime PM of PCIe ports") the
runtime PM support code for PCIe ports in portdrv_pci.c has never been
used, so drop it entirely.

If we are to support runtime PM of PCIe ports, it will have to be done in a
different way most likely anyway.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-09-02 17:12:15 -06:00
Benjamin Tissoires
e7fdb762b9 platform/x86: toshiba: re-enable acpi hotkeys after suspend to disk
On the Toshiba Tecra Z40, after a suspend-to-disk, some FN hotkeys
driven by toshiba_acpi are not functional.

Calling the ACPI object ENAB on resume makes them back alive.

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-09-02 15:45:36 -07:00
Boris BREZILLON
16eeaec779 clk: at91: fix div by zero in USB clock driver
Test rate value before calculating the div value to avoid div by zero.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:37:26 -07:00
Boris BREZILLON
13a6073d4c clk: at91: rework rm9200 USB clock to propagate set_rate to the parent clk
The RM9200 USB clock is actually connected to a single parent (the PLLB)
on which we can apply a specific divider.
The USB clock divider does not allow for fine grained control on the USB
clock frequency, hence propagating the set_rate request to the parent is
the only choice we have to properly configure the USB clock rate.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:37:22 -07:00
Boris BREZILLON
87e2ed338f clk: at91: fix recalc_rate implementation of PLL driver
Use the cached values to calculate PLL rate instead of the register values.
This is required to prevent erroneous PLL rate return when the PLL rate
has been configured but the PLL is not prepared yet.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:37:17 -07:00
Boris BREZILLON
3ef9dd2bab clk: at91: rework PLL rate calculation
The AT91 PLL rate configuration is done by configuring a multiplier/divider
pair.
The previous calculation was over-complicated (and apparently buggy).
Simplify the implementation and add some comments to explain what is done
here.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:37:11 -07:00
Boris BREZILLON
078a3eb519 clk: at91: fix PLL_MAX_COUNT macro definition
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Reported-by: Gaël PORTAY <gael.portay@gmail.com>
Tested-by: Gaël PORTAY <gael.portay@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:36:56 -07:00
Mark Brown
f58f0cba15 Merge remote-tracking branches 'asoc/fix/axi', 'asoc/fix/cs4265', 'asoc/fix/da732x', 'asoc/fix/omap', 'asoc/fix/rsnd', 'asoc/fix/rt5640', 'asoc/fix/rt5677', 'asoc/fix/simple' and 'asoc/fix/tegra' into asoc-linus 2014-09-02 23:33:39 +01:00
Mark Brown
e65f6b1eb5 Merge remote-tracking branch 'asoc/fix/core' into asoc-linus 2014-09-02 23:33:38 +01:00
Dave Airlie
a18b29f0c6 Merge tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2014-08-22:
- basic code for execlist, which is the fancy new cmd submission on gen8. Still
  disabled by default (Ben, Oscar Mateo, Thomas Daniel et al)
- remove the useless usage of console_lock for I915_FBDEV=n (Chris)
- clean up relations between ctx and ppgtt
- clean up ppgtt lifetime handling (Michel Thierry)
- various cursor code improvements from Ville
- execbuffer code cleanups and secure batch fixes (Chris)
- prep work for dev -> dev_priv transition (Chris)
- some of the prep patches for the seqno -> request object transition (Chris)
- various small improvements all over

* tag 'drm-intel-next-2014-09-01' of git://anongit.freedesktop.org/drm-intel: (86 commits)
  drm/i915: fix suspend/resume for GENs w/o runtime PM support
  drm/i915: Update DRIVER_DATE to 20140822
  drm: fix plane rotation when restoring fbdev configuration
  drm/i915/bdw: Disable execlists by default
  drm/i915/bdw: Enable Logical Ring Contexts (hence, Execlists)
  drm/i915/bdw: Document Logical Rings, LR contexts and Execlists
  drm/i915/bdw: Print context state in debugfs
  drm/i915/bdw: Display context backing obj & ringbuffer info in debugfs
  drm/i915/bdw: Display execlists info in debugfs
  drm/i915/bdw: Disable semaphores for Execlists
  drm/i915/bdw: Make sure gpu reset still works with Execlists
  drm/i915/bdw: Don't write PDP in the legacy way when using LRCs
  drm/i915: Track cursor changes as frontbuffer tracking flushes
  drm/i915/bdw: Help out the ctx switch interrupt handler
  drm/i915/bdw: Avoid non-lite-restore preemptions
  drm/i915/bdw: Handle context switch events
  drm/i915/bdw: Two-stage execlist submit process
  drm/i915/bdw: Write the tail pointer, LRC style
  drm/i915/bdw: Implement context switching (somewhat)
  drm/i915/bdw: Emission of requests with logical rings
  ...

Conflicts:
	drivers/gpu/drm/i915/i915_drv.c
2014-09-03 08:30:48 +10:00
Mathias Krause
b3d94d7011 ideapad-laptop: Constify DMI table for real!
This is a follow-up patch to commit 49458e8308 ("ideapad-laptop:
Constify DMI table and other r/o variables") to do what its commit
message says. The actual commit differs from the patch posted at
https://www.mail-archive.com/platform-driver-x86@vger.kernel.org/msg05340.html
significantly, probably due to a bad merge conflict resolution. Fix up
the mess and constify the DMI table for real and fix the bogus
double-const of ideapad_rfk_data[].

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2014-09-02 15:16:24 -07:00
Heiko Stübner
fe94f974e9 clk: rockchip: protect critical clocks from getting disabled
The clock-tree contains clocks that should never get disabled automatically.
One example are the base ACLKs, the base supplies for all peripherals.

Therefore add a structure similar to the sunxi clock-tree to protect these
special clocks from being disabled.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Doug Anderson <dianders@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:18 -07:00
Heiko Stübner
1a4b181995 clk: rockchip: make rockchip_clk_register_branch static
It is only used locally in clk/rockchip/clk.c and thus can be static.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:17 -07:00
Heiko Stübner
b2155a71a7 clk: rockchip: implement the fraction divider branch type
Rockchip SoCs may provide fraction dividers for some clocks, mostly for
i2s and uarts. In contrast to the other registers, these do not use
the hiword-mask paradigm, but instead split the register into the upper
16 bit for the nominator and the lower 16 bit for the denominator.

The common clock framework got a generic fractional divider clock type
recently that can accomodate this setting easily. All currently known
fraction dividers have a separate gate too, therefore implement the
divider as composite using the ops-struct from fractional_divider clock
and add the gate if necessary.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:17 -07:00
Kuninori Morimoto
4abe240878 clk: shmobile: add missing 0x0100 for SDCKCR
10cdfe9f32
(clk: shmobile: Add R-Car Gen2 clocks support)
added R-Car Gen2 clock support via DT for v3.14.

But, cpg_sd01_div_table is missing
"0x0100: x 1/8" division ratio.
This patch fixes hidden bug.
It is based on R-Car H2 v0.7, R-Car M2 v0.9.

Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:16 -07:00
Ulrich Hecht
7466103cc0 ARM: shmobile: r8a7794: document CPG clock support
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:15 -07:00
Ulrich Hecht
5acb7bbbab ARM: shmobile: r8a7794: document MSTP clock support
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:03:14 -07:00
Mike Turquette
105299381d cpufreq: kirkwood: use the powersave multiplexer
The powersave clock acts like a multiplexer for the cpu, selecting
either the clock signal derived from the cpu pll or from the ddr clock.
This patch changes powersave from a gate clock to a mux clock to better
reflect this behavior.

This is a cleaner approach whereby the frequency of the cpu always
matches the rate of powersave_clk. The cpufreq driver for the kirkwood
platform no longer must parse this behavior out of various calls to
clk_enable and clk_disable, but can instead simply select the parent cpu
it wants when changing rate. Likewise when requesting the cpu rate we
need only query powersave_clk's rate through the usual call to
clk_get_rate.

The new clock data and corresponding changes to the cpufreq driver are
combined into this single commit to avoid a git bisect issue where this
cpufreq driver fails to work properly between the commit that updates
the kirkwood clock driver and the commit that changes how the cpufreq
driver uses that clock.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-02 15:02:54 -07:00
Trond Myklebust
66f09ca717 nfs: do not start the callback thread until we set rqstp->rq_task
This fixes an Oopsable race when starting up the callback server.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-09-02 17:53:30 -04:00
Oleg Nesterov
6f46b3aef0 x86: copy_thread: Don't nullify ->ptrace_bps twice
Both 32bit and 64bit versions of copy_thread() do memset(ptrace_bps)
twice for no reason, kill the 2nd memset().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175733.GA21676@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-02 14:51:17 -07:00
Oleg Nesterov
dc56c0f9b8 x86, fpu: Shift "fpu_counter = 0" from copy_thread() to arch_dup_task_struct()
Cosmetic, but I think thread.fpu_counter should be initialized in
arch_dup_task_struct() too, along with other "fpu" variables. And
probably it make sense to turn it into thread.fpu->counter.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175730.GA21669@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-02 14:51:16 -07:00
Oleg Nesterov
5e23fee23e x86, fpu: copy_process: Sanitize fpu->last_cpu initialization
Cosmetic, but imho memset(&dst->thread.fpu, 0) is not good simply
because it hides the (important) usage of ->has_fpu/etc from grep.
Change this code to initialize the members explicitly.

And note that ->last_cpu = 0 looks simply wrong, this can confuse
fpu_lazy_restore() if per_cpu(fpu_owner_task, 0) has already exited
and copy_process() re-allocated the same task_struct. Fortunately
this is not actually possible because child->fpu_counter == 0 and
thus fpu_lazy_restore() will not be called, but still this is not
clean/robust.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175727.GA21666@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-09-02 14:51:16 -07:00