Commit graph

141,155 commits

Author SHA1 Message Date
Laxman Dewangan
25553ff075 gpio: gpiolib: Support for open source/emitter gpios
Adding support for the open source gpio on which client
can specify the open source property through GPIO flag
GPIOF_OPEN_SOURCE at the time of gpio request.
The open source pins are normally pulled low and it
cannot be driven to output with value of 0 and so
when client request for setting the pin to LOW, the
gpio will be set to input direction to make pin in tristate
and hence PULL-DOWN on pins will make the state to LOW.
The open source pin can be driven to HIGH by setting output
with value of 1.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-05 07:49:44 -07:00
Laxman Dewangan
aca5ce14eb gpio: gpiolib: Support for open drain/collector gpios
Adding support for the open drain gpio on which client
can specify the open drain property through GPIO flag
GPIOF_OPEN_DRAIN at the time of gpio request.
The open drain pins are normally pulled high and it
cannot be driven to output with value of 1 and so
when client request for setting the pin to HIGH, the
gpio will be set to input direction to make pin in tristate
and hence PULL-UP on pins will make the state to HIGH.
The open drain pin can be driven to LOW by setting output
with value of 0.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviwed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-03-05 07:49:44 -07:00
Alan Cox
91982b58d3 drm/gma500: Fix Cedarview boot failures in 3.3-rc
Production GMA3600/3650 hardware turns out to be subtly different to the
development platforms. This combined with a minor driver bug is causing
the kernel to hang on these platforms.

This patch does the following

- turn down a couple of messages that were meant to be debug and are
  causing much confusion

- ensure the hotplug interrupt is disabled on Cedartrail systems.

- fix a bug where gtt roll mode called psbfb_sync, which tries to sync
  the 2D engine. On other devices it is harmless as the 2D engine is
  present but not in use when in gtt roll mode, on Cedartrail it causes
  a hang

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-05 14:08:31 +00:00
Eliad Peller
8ccd16e6cb wl12xx: print the tx packet len
Add the packet length to the tx debug print.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:26 +02:00
Eliad Peller
e9ba7152c1 wl12xx: avoid bug_on_recovery during fw switch
Add a flag to indicate we initiated a recovery work
on purpose, in order to avoid triggering BUG() (when
the bug_on_recovery module param was set).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:26 +02:00
Eliad Peller
6667776d3c wl12xx: configure the correct beacon_interval
We didn't update the beacon interval on association
(or on a change notification when working as sta),
so the default interval (100ms) was always used.

Update the beacon interval according to the bss_conf
before starting the sta role (on association).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:26 +02:00
Eliad Peller
97fd311a26 wl12xx: don't allow scanning while device is in ROC
return EBUSY on scan when there is any role
in ROC (not necessarily the one we are going
to use)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:25 +02:00
Eliad Peller
121af04995 wl12xx: don't handle change_channel while associated
Currently, CHANGE_CHANNEL indication while
associated is considered as roaming attempt.

However, with the new auth/assoc redesign,
we no longer have to handle this case,
so remove it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:25 +02:00
Eliad Peller
249e969889 wl12xx: set correct vif type in change_interface callback
In some cases, the wrong vif type was set in the
change_interface callback (P2P_CLIENT/P2P_GO instead
of STA/AP)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:25 +02:00
Eliad Peller
b32b2b0f8e wl12xx: increment session_counter for device role as well
The sesssion_counter has to be incremented each time
the dev is started (similar to sta role).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller
9fd6f21ba2 wl12xx: set authorized AP on sta_state notification
wl12xx currently looks for AP authorization by registering
a netdev notifier and waiting for the IF_OPER_UP notification,
which is quite cumbersome.

Use the newly introduced sta_state callback (waiting
for assoc -> auth notification) instead, in order to
simplify it.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller
2d6cf2b51f wl12xx: implement sta_state callback
Implement sta_state callback instead of the
sta_add/remove callbacks.

Update the fw regarding peer state and ht caps
only after the station was authorized. Otherwise,
the fw might try establishing BA session before
the sta is authorized.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller
8a6a84a471 wl12xx: consider bss_conf->idle instead of hw->conf.flags
On disassociation, check only whether the current vif
is idle, instead of checking whether the device is idle.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Eliad Peller
349345a4ec wl12xx: don't start dev role on ibss vifs
device role is used for scanning and sending packets
before connection. however, since we don't need to
send packets before ibss creation, there is no need
to start the device on idle-off.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-03-05 15:45:24 +02:00
Jiri Kosina
4e70daaf05 tpm_tis: fix tis_lock with respect to RCU
cleanup_tis() -> tpm_remove_hardware() -> syncrhonize_rcu() is being
called in an atomic context (tis_lock spinlock held), which is not
allowed. Convert tis_lock to mutex.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
2012-03-05 14:06:59 +01:00
Axel Lin
4adf9beda5 regulator: Fix mask parameter in da9052_reg_update calls
If the mask parameter is 0, info->activate_bit bit won't be set by
calling da9052_reg_update.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-03-05 12:28:58 +00:00
Dave Airlie
966e0cdd50 drm: drop setting vm_file to filp
Talking to Al Viro on irc, we can see no possible reason for doing
this, the upper mmap code does it. The code has been there since
first import into drm tree I can find.

Al tracked down this as a requirement pre 2.3.51 hasn't been needed since.

Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-05 11:19:08 +00:00
Stephen Warren
ba110d90c0 pinctrl: Show selected function and group in pinmux-pins debugfs
Until recently, the pinctrl pinmux-pins debugfs file displayed the
selected function for each owned pin. This feature was removed during
restructing in support of recent API rework. This change restoreds this
feature, and also displays the group that the function was selected on,
in case a pin is a member of multiple groups.

Based on work by: Linus Walleij <linus.walleij@linaro.org>

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:26:01 +01:00
Stephen Warren
1e2082b520 pinctrl: enhance mapping table to support pin config operations
The pinctrl mapping table can now contain entries to:
* Set the mux function of a pin group
* Apply a set of pin config options to a pin or a group

This allows pinctrl_select_state() to apply pin configs settings as well
as mux settings.

v3: Fix find_pinctrl() to iterate over the correct list.
   s/_MUX_CONFIGS_/_CONFIGS_/ in mapping table macros.
   Fix documentation to use correct mapping table macro.
v2: Added numerous extra PIN_MAP_*() special-case macros.
   Fixed kerneldoc typo. Delete pinctrl_get_pin_id() and
   replace it with pin_get_from_name(). Various minor fixes.
   Updates due to rebase.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:25:11 +01:00
Stephen Warren
6e5e959dde pinctrl: API changes to support multiple states per device
The API model is changed from:

p = pinctrl_get(dev, "state1");
pinctrl_enable(p);
...
pinctrl_disable(p);
pinctrl_put(p);
p = pinctrl_get(dev, "state2");
pinctrl_enable(p);
...
pinctrl_disable(p);
pinctrl_put(p);

to this:

p = pinctrl_get(dev);
s1 = pinctrl_lookup_state(p, "state1");
s2 = pinctrl_lookup_state(p, "state2");
pinctrl_select_state(p, s1);
...
pinctrl_select_state(p, s2);
...
pinctrl_put(p);

This allows devices to directly transition between states without
disabling the pin controller programming and put()/get()ing the
configuration data each time. This model will also better suit pinconf
programming, which doesn't have a concept of "disable".

The special-case hogging feature of pin controllers is re-written to use
the regular APIs instead of special-case code. Hence, the pinmux-hogs
debugfs file is removed; see the top-level pinctrl-handles files for
equivalent data.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:22:59 +01:00
Stephen Warren
0e3db173e2 pinctrl: add usecount to pins for muxing
Multiple mapping table entries could reference the same pin, and hence
"own" it. This would be unusual now that pinctrl_get() represents a single
state for a client device, but in the future when it represents all known
states for a device, this is quite likely. Implement reference counting
for pin ownership to handle this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:21:46 +01:00
Stephen Warren
7ecdb16fe6 pinctrl: refactor struct pinctrl handling in core.c vs pinmux.c
This change separates two aspects of struct pinctrl:

a) The data representation of the parsed mapping table, into:

   1) The top-level struct pinctrl object, a single entity returned
      by pinctrl_get().

   2) The parsed version of each mapping table entry, struct
      pinctrl_setting, of which there is one per mapping table entry.

b) The code that handles this; the code for (1) above is in core.c, and
   the code to parse/execute each entry in (2) above is in pinmux.c, while
   the iteration over multiple settings is lifted to core.c.

This will allow the following future changes:

1) pinctrl_get() API rework, so that struct pinctrl represents all states
   for the device, and the device can select between them without calling
   put()/get() again.

2) To support that, a struct pinctrl_state object will be inserted into
   the data model between the struct pinctrl and struct pinctrl_setting.

3) The mapping table will be extended to allow specification of pin config
   settings too. To support this, struct pinctrl_setting will be enhanced
   to store either mux settings or config settings, and functions will be
   added to pinconf.c to parse/execute pin configuration settings.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Dong Aisheng <dong.aisheng@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:20:50 +01:00
Stephen Warren
57b676f9c1 pinctrl: fix and simplify locking
There are many problems with the current pinctrl locking:

struct pinctrl_dev's gpio_ranges_lock isn't effective;
pinctrl_match_gpio_range() only holds this lock while searching for a gpio
range, but the found range is return and manipulated after releading the
lock. This could allow pinctrl_remove_gpio_range() for that range while it
is in use, and the caller may very well delete the range after removing it,
causing pinctrl code to touch the now-free range object.

Solving this requires the introduction of a higher-level lock, at least
a lock per pin controller, which both gpio range registration and
pinctrl_get()/put() will acquire.

There is missing locking on HW programming; pin controllers may pack the
configuration for different pins/groups/config options/... into one
register, and hence have to read-modify-write the register. This needs to
be protected, but currently isn't. Related, a future change will add a
"complete" op to the pin controller drivers, the idea being that each
state's programming will be programmed into the pinctrl driver followed
by the "complete" call, which may e.g. flush a register cache to HW. For
this to work, it must not be possible to interleave the pinctrl driver
calls for different devices.

As above, solving this requires the introduction of a higher-level lock,
at least a lock per pin controller, which will be held for the duration
of any pinctrl_enable()/disable() call.

However, each pinctrl mapping table entry may affect a different pin
controller if necessary. Hence, with a per-pin-controller lock, almost
any pinctrl API may need to acquire multiple locks, one per controller.
To avoid deadlock, these would need to be acquired in the same order in
all cases. This is extremely difficult to implement in the case of
pinctrl_get(), which doesn't know which pin controllers to lock until it
has parsed the entire mapping table, since it contains somewhat arbitrary
data.

The simplest solution here is to introduce a single lock that covers all
pin controllers at once. This will be acquired by all pinctrl APIs.

This then makes struct pinctrl's mutex irrelevant, since that single lock
will always be held whenever this mutex is currently held.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-03-05 11:19:49 +01:00
Nikolai Kondrashov
883e0e3662 HID: hid-input: allow array fields out of range
Allow array field values out of range as per HID 1.11 specification,
section 6.2.25:

	Rather than returning a single bit for each button in the group, an
	array returns an index in each field that corresponds to the pressed
	button (like keyboard scan codes). An out-of range value in and array
	field is considered no controls asserted.

Apparently, "and" above is a typo and should be "an".

This fixes at least Waltop tablet pen clicks - otherwise BTN_TOUCH is never
released.

The relevant part of Waltop tablet report descriptors is this:

	0x09, 0x42,         /*          Usage (Tip Switch),         */
	0x09, 0x44,         /*          Usage (Barrel Switch),      */
	0x09, 0x46,         /*          Usage (Tablet Pick),        */
	0x15, 0x01,         /*          Logical Minimum (1),        */
	0x25, 0x03,         /*          Logical Maximum (3),        */
	0x75, 0x04,         /*          Report Size (4),            */
	0x95, 0x01,         /*          Report Count (1),           */
	0x80,               /*          Input,                      */

This is a regression fix for commit b4b583d ("HID: be more strict when
ignoring out-of-range fields").

Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-05 10:28:58 +01:00
Doug Ledford
d474186f19 IB/iser: Free IB connection resources in the proper place
We allocate the login dma buffers in iser_verbs.c as part of
alloc_ib_conn_resources(), however we are freeing them in
iser_initiator.c as part of iser_free_rx_descriptors().  This is
needlessly confusing.  We have an alloc_rx_descriptors() and it
doesn't alloc something that the free_rx_descriptors() frees, and we
have an alloc_ib_conn_resources() that allocs something not freed by
free_ib_conn_resources().  Clean that up.

Signed-off-by: Doug Ledford <dledford@redhat.com>

[ Fix build error in iser_free_ib_conn_res().  - Or ]

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-03-05 00:23:27 -08:00
Ingo Molnar
737f24bda7 Merge branch 'perf/urgent' into perf/core
Conflicts:
	tools/perf/builtin-record.c
	tools/perf/builtin-top.c
	tools/perf/perf.h
	tools/perf/util/top.h

Merge reason: resolve these cherry-picking conflicts.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-03-05 09:20:08 +01:00
Rob Herring
47168824fa usb: ohci-pxa27x: add explicit include of hardware.h
ohci-pxa27x needs cpu_is_pxa3xx macro.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2012-03-04 22:01:33 -06:00
Rob Herring
d50673ed97 Merge remote-tracking branch 'arm-soc/at91/base2+cleanup' into cleanup-base 2012-03-04 22:00:46 -06:00
David S. Miller
ffcb97388b Merge branch 'master' of git://gitorious.org/linux-can/linux-can-next 2012-03-04 21:59:39 -05:00
Shreyas Bhatewara
4c1dc80a74 vmxnet3: Fix log messages and corrects some typos
Fix log messages and corrects some typos

Change logging of failure to enable MSI/MSI-X to display device's PCI
address instead of eth%d. Rectify a typo.

Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Reviewed-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 21:37:51 -05:00
Matt Carlson
0b47150671 tg3: Recode PCI MRRS adjustment as a PCI quirk
This patch recodes the MRRS cap for 5719 A0 devices as a PCI quirk.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:54:01 -05:00
Paul Gortmaker
e19a82c18f ucc_geth: separate out rx/tx ring alloc and free operations
Factor out the the existing allocation and free operations
so that they can be used individually.

This is to improve code readability, and also to prepare for
possible future changes like better error recovery and more
dynamic configuration (e.g on-the-fly resizing of the rings).

This change represents a straight up relocation of the existing
code into separate routines without changing any of the contained
code itself.  Local variables are relocated as necessary.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:54:01 -05:00
Paul Mackerras
4b32da2bcf ppp: Replace uses of <linux/if_ppp.h> with <linux/ppp-ioctl.h>
Since all that include/linux/if_ppp.h does is #include <linux/ppp-ioctl.h>,
this replaces the occurrences of #include <linux/if_ppp.h> with
#include <linux/ppp-ioctl.h>.

It also corrects an error in Documentation/networking/l2tp.txt, where
it referenced include/linux/if_ppp.h as the source of some definitions
that are actually now defined in include/linux/if_pppol2tp.h.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:41:38 -05:00
Paul Mackerras
bf7daebb9f ppp: Move ioctl definitions from if_ppp.h to new ppp-ioctl.h
This moves the definitions of the ioctls, constants and structures
relating to the ppp_generic interface to userspace out from if_ppp.h
to a new file, ppp-ioctl.h.  The new file has my copyright since I
designed and implemented the ppp_generic interface in the late 1990s.
None of the contents of this file comes from the original if_ppp.h
published by Carnegie Mellon University.

Of the remainder of if_ppp.h, only the PPP_MTU definition was being
used, and this replaces the uses of it with PPP_MRU (which is identical).
Therefore, this replaces the entire file with the single line

#include <linux/ppp-ioctl.h>

which clearly doesn't contain any CMU code.  Thus I have removed the
CMU copyright notice with its problematic advertising clause, and in
fact since it's only one trivial line I have not added any other
copyright notice.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:41:38 -05:00
Paul Mackerras
784db3f062 ppp: Change copyright notices from ANU to me
This changes the copyright notices on the PPP code that I developed
in the late 1990s from being copyright The Australian National
University to copyright Paul Mackerras.  I can do this as I have an
acknowledgement in writing from the Head of the Computer Science
Department at ANU (where I worked then) that ANU does not claim any
intellectual property in this code.

While I'm at it, change the copyright notice from BSD-style to
GNU GPL like the rest of the kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:41:38 -05:00
Michael Chan
2fae5e3670 tg3: Fix poor tx performance on 57766 after MTU change
GRC reset causes the read DMA engine to go into a mode that breaks up
requests into 256 bytes.  A PHY reset is required to bring it back to
the normal mode.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:39:31 -05:00
Michael Chan
6541b806b5 tg3: Add memory barriers to sync BD data
for weak memory model architectures to ensure that the chip will DMA
valid BD data.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:39:31 -05:00
Michael Chan
c441b45676 tg3: Fix jumbo loopback test on 5719
Loopback on 9K packet fails because the chip has a DMA limit of 4K.  The
loopback test logic uses a single BD for simplicity.  Fix it by reducing
the jumbo packet size to the DMA limit.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Reviewed-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04 20:39:31 -05:00
Linus Torvalds
a5939eefdc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
MFD fixes from Samuel Ortiz:
 "This is the pull request for the MFD fixes for 3.3.  We have a few
  NULL pointer dereferences fixes, an ACPI conflict check fix, and a
  couple of wm8994 fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Correct readability of WM8994 DC servo 4E register
  mfd: Initialize tps65912 irq platform data properly
  mfd: Fix ACPI conflict check
  mfd: Fix ab8500 error path bug
  mfd: Test for jack detection when deciding if wm8994 should suspend
  mfd: Initialize tps65910 irq platform data properly
  mfd: Fix possible s5m null pointer dereference
  mfd: wm8350 variable dereferenced before check
2012-03-04 17:10:06 -08:00
Rafael J. Wysocki
48ed000316 Merge branch 'pm-domains'
* pm-domains:
  PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case
  PM / Domains: Provide a dummy dev_gpd_data() when generic domains are not used
  PM / Domains: Run late/early device suspend callbacks at the right time
  ARM: EXYNOS: Hook up power domains to generic power domain infrastructure
  PM / Domains: Add OF support
2012-03-04 23:11:20 +01:00
Rafael J. Wysocki
643161ace2 Merge branch 'pm-sleep'
* pm-sleep:
  PM / Freezer: Remove references to TIF_FREEZE in comments
  PM / Sleep: Add more wakeup source initialization routines
  PM / Hibernate: Enable usermodehelpers in hibernate() error path
  PM / Sleep: Make __pm_stay_awake() delete wakeup source timers
  PM / Sleep: Fix race conditions related to wakeup source timer function
  PM / Sleep: Fix possible infinite loop during wakeup source destruction
  PM / Hibernate: print physical addresses consistently with other parts of kernel
  PM: Add comment describing relationships between PM callbacks to pm.h
  PM / Sleep: Drop suspend_stats_update()
  PM / Sleep: Make enter_state() in kernel/power/suspend.c static
  PM / Sleep: Unify kerneldoc comments in kernel/power/suspend.c
  PM / Sleep: Remove unnecessary label from suspend_freeze_processes()
  PM / Sleep: Do not check wakeup too often in try_to_freeze_tasks()
  PM / Sleep: Initialize wakeup source locks in wakeup_source_add()
  PM / Hibernate: Refactor and simplify freezer_test_done
  PM / Hibernate: Thaw kernel threads in hibernation_snapshot() in error/test path
  PM / Freezer / Docs: Document the beauty of freeze/thaw semantics
  PM / Suspend: Avoid code duplication in suspend statistics update
  PM / Sleep: Introduce generic callbacks for new device PM phases
  PM / Sleep: Introduce "late suspend" and "early resume" of devices
2012-03-04 23:11:14 +01:00
Rafael J. Wysocki
743c5bc210 Merge branch 'pm-devfreq'
* pm-devfreq:
  PM / devfreq: add min/max_freq limit requested by users.
  PM / devfreq: fixed syntax errors.
  devfreq: Remove MODULE_ALIAS for exynos4 busfreq driver
  devfreq: exynos4_bus: Use dev_get_drvdata at appropriate places
2012-03-04 23:10:46 +01:00
Rafael J. Wysocki
8671bbc1bd PM / Sleep: Add more wakeup source initialization routines
The existing wakeup source initialization routines are not
particularly useful for wakeup sources that aren't created by
wakeup_source_create(), because their users have to open code
filling the objects with zeros and setting their names.  For this
reason, introduce routines that can be used for initializing, for
example, static wakeup source objects.

Requested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-04 23:08:46 +01:00
Rafael J. Wysocki
4782e1654b PM / Sleep: Make __pm_stay_awake() delete wakeup source timers
If __pm_stay_awake() is called after __pm_wakeup_event() for the same
wakep source object before its timer expires, it won't cancel the
timer, so the wakeup source will be deactivated from the timer
function as scheduled by __pm_wakeup_event().  In that case
__pm_stay_awake() doesn't have any effect beyond incrementing
the wakeup source's event_count field, although it should cancel
the timer and make the wakeup source stay active until __pm_relax()
is called for it.

To fix this problem make __pm_stay_awake() delete the wakeup source's
timer and ensure that it won't be deactivated from the timer funtion
afterwards by clearing its timer_expires field.

Reported-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-04 23:08:27 +01:00
Rafael J. Wysocki
da863cddd8 PM / Sleep: Fix race conditions related to wakeup source timer function
If __pm_wakeup_event() has been used (with a nonzero timeout) to
report a wakeup event and then __pm_relax() immediately followed by
__pm_stay_awake() is called or __pm_wakeup_event() is called once
again for the same wakeup source object before its timer expires, the
timer function pm_wakeup_timer_fn() may still be run as a result of
the previous __pm_wakeup_event() call.  In either of those cases it
may mistakenly deactivate the wakeup source that has just been
activated.

To prevent that from happening, make wakeup_source_deactivate()
clear the wakeup source's timer_expires field and make
pm_wakeup_timer_fn() check if timer_expires is different from zero
and if it's not in future before calling wakeup_source_deactivate()
(if timer_expires is 0, it means that the timer has just been
deleted and if timer_expires is in future, it means that the timer
has just been rescheduled to a different time).

Reported-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-04 23:08:14 +01:00
Rafael J. Wysocki
d94aff8782 PM / Sleep: Fix possible infinite loop during wakeup source destruction
If wakeup_source_destroy() is called for an active wakeup source that
is never deactivated, it will spin forever.  To prevent that from
happening, make wakeup_source_destroy() call __pm_relax() for the
wakeup source object it is about to free instead of waiting until
it will be deactivated by someone else.  However, for this to work
it also needs to make sure that the timer function will not be
executed after the final __pm_relax(), so make it run
del_timer_sync() on the wakeup source's timer beforehand.

Additionally, update the kerneldoc comment to document the
requirement that __pm_stay_awake() and __pm_wakeup_event() must not
be run in parallel with wakeup_source_destroy().

Reported-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-03-04 23:08:02 +01:00
Arnd Bergmann
7cb7f82611 Merge tag 'tegra-soc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into tegra/soc-drivers
Tegra SoC driver support.

Some device tree conversions, some new drivers. and a fix for an issue
introduced in Grant Likely's irq_domain conversion in his tree. Because
of that, this branch depends on his branch to build (but not to merge):

git://git.secretlab.ca/git/linux-2.6.git irqdomain/next

* tag 'tegra-soc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra: (34 commits)
  ARM: tegra: uncompress.h: Don't depend on kernel headers
  gpio: tegra: Fix build issue due to irq_domain rework.
  ARM: tegra: Remove duplicate PMU interrupt inversion code
  ARM: tegra: Add a simple PMC driver
  ARM: tegra: dma: not required to move requestor when stopping.
  ARM: tegra: Fix EMC pdata initialization from registers
  gpio: tegra: Parameterize the number of banks
  gpio: tegra: Dynamically allocate IRQ base, and support DT
  ARM: tegra: Remove use of TEGRA_GPIO_TO_IRQ
  ARM: tegra: Pass uncompress.h UART selection to DEBUG_LL
  ARM: tegra: uncompress.h: Choose a UART at runtime
  ARM: tegra: uncompress.h: Store UART address in a variable
  ARM: tegra: Introduce define DEBUG_UART_SHIFT
  ARM: tegra: Support Tegra30 in decompressor UART setup
  ARM: tegra: Pause DMA when reading transfer count
  ARM: tegra: emc: device tree support
  ARM: tegra: emc: convert tegra2_emc to a platform driver
  ARM: tegra: fuse: add bct strapping reading
  ARM: tegra: fuse: add functions to access chip revision
  ARM: tegra: fuse: use apbio dma for register access
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-04 21:03:30 +00:00
Dmitry Torokhov
fa3e44f391 Input: atmel-wm97xx - convert to dev_pm_ops
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-04 10:51:04 -08:00
Dmitry Torokhov
0c0c440f4d Input: atmel-wm97xx - set driver owner
This allows creating proper sysfs link between driver and its module.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-04 10:50:24 -08:00
Dmitry Torokhov
aaa60fa7ac Input: cyttsp - remove useless checks in cyttsp_probe()
This fixes reference-before-check problem; there is no reason to check
if caller passed NULL dev or bus_ops as it is done only by bus-specific
drivers which already do the right thing.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-03-04 10:49:27 -08:00