Commit graph

299,176 commits

Author SHA1 Message Date
Alan Cox
bbbb262d37 gma500: Add device framework
The devices have various internal differences so we have some abstractions
to hide the ugly differences and we then wrap them up in standard
interfaces. Add these bits

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 11:25:08 +00:00
Alan Cox
4d8d096e9a gma500: introduce the framebuffer support code
We support 2D acceleration on some devices but we try and do tricks with
the GTT as a starting point as this is far faster. The GTT logic could be
improved further but for most display sizes it already makes a pretty good
decision.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 11:24:36 +00:00
Alan Cox
8c8f1c958a gma500: introduce the GTT and MMU handling logic
This fits alongside the GEM support to manage our resources on the card
itself. It's not actually clear we need to configure the MMU at all.
Further research is needed before removing it entirely. For now we suck it
in (slightly abused) from the old semi-free driver.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 11:23:38 +00:00
Alan Cox
e32681d66d gma500: GEM and GEM glue
The driver uses GEM along with a couple of small bits of wrapping of its
own. The only real oddity here is the support for using the 'stolen' memory
rather than wasting several MB.

We use a simple resource manager as we don't need to manage our space
intensively at all as we only do 2D work. We also have a GTT which is
entirely GPU facing so in the Cedarview case are not even allocating from
host address space.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 11:22:36 +00:00
Alan Cox
3abcf41fb1 gma500: Move the basic driver out of staging
This driver supports unaccelerated KMS display, and accelerated console
handling on the Intel Poulsbo, Oaktrail, Cedarview and Medfield hardware.

For the initial merge Medfield will be left out as it needs considerable
further work to reach a decent standard

Begin by adding the Makefiles and Kconfig. These are not yet plumbed into
the DRM layer so will have no effect on their own

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-16 11:19:54 +00:00
Will Deacon
eaa142ca3d ARM: mach-imx: convert logical CPU numbers to physical numbers
This patch uses the new cpu_logical_map() macro for converting logical
CPU numbers into physical numbers when releasing CPUs during the SMP
boot and CPU hotplug paths.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-16 10:56:53 +00:00
Will Deacon
bf14fc54d6 ARM: highbank: convert logical CPU numbers to physical numbers
This patch uses the new cpu_logical_map() macro for converting logical
CPU numbers into physical numbers when releasing CPUs during the SMP
boot and CPU hotplug paths.

Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-16 10:56:53 +00:00
Andrey Danin
1a083257eb ASoC: alc5632: rename volume/switch contols for master and speaker volumes.
Signed-off-by: Andrey Danin <danindrey@mail.ru>
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 10:43:28 +00:00
Leon Romanovsky
bb39753c2b ASoC: Convert ALC5632 codec to use regmap API
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 10:41:56 +00:00
Leon Romanovsky
c9be8427b1 ASoC: alc5632: Fix compile without CONFIG_PM
Signed-off-by: Leon Romanovsky <leon@leon.nu>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-16 10:41:55 +00:00
Takashi Iwai
fc5b15f138 ALSA: hda - Add missing initialization of kctl jack status
Otherwise the jack kctls will report invalid values until the jack
is re-plugged.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:04 +01:00
Takashi Iwai
344b01aecd ALSA: hda/jack - Fix the assignment of input jack-type
The type field was lost during the transition.  Restored.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:04 +01:00
Takashi Iwai
cfc7c9d307 ALSA: hda/jack - Fix NULL-dereference at probing
At probing time, the elements that aren't assigned to kctl or jack may
be called.  Need proper NULL-checks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:04 +01:00
David Henningsson
d1cb620081 ALSA: HDA: Jack: Export required functions from hda_jack.c
These two functions are being used by the codec-idt and codec-hdmi
modules, so they need to be exported properly.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:04 +01:00
Takashi Iwai
aad37dbd56 ALSA: hda - Merge input-jack helpers to hda_jack.c
We can use the very same table in hda_jack.c for managing the list for
input-jack elements, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:04 +01:00
Takashi Iwai
35be544af3 ALSA: Introduce common helper functions for jack-detection control
Now move the helper function for creating and reporting the jack-detection
to the common place.  The driver that needs this functionality should
select CONFIG_SND_KCTL_JACK kconfig.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:03 +01:00
Takashi Iwai
3a93897ea3 ALSA: hda - Manage unsol tags in hda_jack.c
Manage the tags assigned for unsolicited events dynamically together
with the jack-detection routines.  Basically this is almost same as what
we've done in patch_sigmatel.c.  Assign the new tag number for each new
unsol event, associate with the given NID and the action type, etc.

With this change, now all pins looked over in snd_hda_jack_add_kctls()
are actually enabled for detection now even if the pins aren't used for
jack-retasking by the driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:14:03 +01:00
Takashi Iwai
01a61e12b4 ALSA: hda - Create jack-detection kcontrols
Create kcontrols for pin jack-detections, which work similarly like
jack-input layer.  Each control will notify when the jack is plugged or
unplugged, and also user can read the value at any time via the normal
control API.

The control elements are created with iface=CARD, so that they won't
appear in the mixer apps.

So far, only the pins that enabled the jack-detection are registered.
For covering all pins, the transition of the common unsol-tag handling
would be needed.  Stay tuned.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:12:17 +01:00
Takashi Iwai
1835a0f9a2 ALSA: hda - Cache the jack-detection value
Introduce a table containing the pins and their jack-detection states
for avoiding the unnecessary verbs to check the pin status at each time.

When the unsol event is enabled via snd_hda_jack_detect_enable(), it
automatically adds the given NID to the table.  Then the driver supposes
that the codec driver will set the dirty flag appropariately when an
unsolicited event is invoked for that pin.

The behavior for reading other pins that aren't registered in the table
doesn't change.  Only the pins assigned to the table are cached, so far.

In near futre, this table can be extended to use the central place for
the unsolicited events of all pins, etc, and eventually include the
jack-detect kcontrols that replace the current input-jack stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:11:15 +01:00
Takashi Iwai
04f5ade6af ALSA: hda - Introduce snd_hda_get_pin_label()
Create a new helper function snd_hda_get_pin_label() for getting a label
string for both input and output pins.  hda_get_input_pin_label() is
obsoleted by this function, and the callers are replaced appropriately
now by this patch.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 11:10:16 +01:00
Will Deacon
14e25c5eeb ARM: PMU: remove pmu_init declaration
pmu_init no longer exists, so don't declare it in asm/pmu.h.

Reported-by: Pawel Moll <Pawel.Moll@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-16 10:06:57 +00:00
Will Deacon
ec84d529b6 ARM: PMU: re-export release_pmu symbol to modules
Commit b0e89590 ("ARM: PMU: move CPU PMU platform device handling and
init into perf") inadvertently removed the EXPORT_SYMBOL_GPL on
release_pmu, so out-of-tree modules can no longer play nice with perf,
even if they tried in the first place.

This patch re-exports the symbol.

Reported-by: Jon Medhurst (Tixy) <jon.medhurst@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-11-16 10:06:42 +00:00
Takashi Iwai
8b940fc457 Merge branch 'fix/hda' into topic/hda 2011-11-16 11:05:55 +01:00
Takashi Iwai
25d7d59d1f ALSA: hda - Update URLs in document
Some stuff was moved from kernel.org to other places.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 10:53:38 +01:00
Wu Fengguang
2d1b439bdb ALSA: hda - move eld->spk_alloc fixup to hdmi_update_eld()
It looks more natural and saves two lines of code.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 10:44:58 +01:00
Wu Fengguang
744626dada ALSA: hda - delayed ELD repoll
The Intel HDMI chips (ironlake at least) are found to have ~250ms delay
between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes
actually readable. During the time the ELD buffer is mysteriously all 0.

Fix it by scheduling a delayed work to re-read ELD buffer after 300ms.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 10:44:42 +01:00
Wu Fengguang
b95d68b817 ALSA: hda - fix ELD memory leak
memset(eld) clears eld->proc_entry which will leak the struct
snd_info_entry when unloading module.

Fix it by
- memset only the fields before eld->eld_buffer
- set eld->eld_valid to true _after_ all eld fields have been filled

Cc: <stable@kernel.org>
Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-11-16 10:44:21 +01:00
Linus Torvalds
6aaf05f472 Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] topology: fix topology on z10 machines
  [S390] crypto: avoid MSA3 and MSA4 instructions in ESA mode
  [S390] avoid STCKF if running in ESA mode
  [S390] zfcpdump: Do not initialize zfcpdump in kdump mode
  [S390] ap: Setup processing for messages in request queue.
  [S390] Kconfig: Select CONFIG_KEXEC for CONFIG_CRASH_DUMP
  [S390] incorrect note program header
  [S390] pfault: ignore leftover completion interrupts
  [S390] fix pgste update logic
  [S390] wire up process_vm syscalls
2011-11-16 07:33:50 -02:00
Vasanthakumar Thiagarajan
59500b4864 ath6kl: Fix AP mode operation after interface down/up
When operating AP interface is brough down the mode is reset to
STA. This STA will be reconfigured into AP mode when the interface
is brought up again. This sequence will be successful only when
change_virtual_intf() returns with no error, but there is a
check in this callback which does the type change only when
that interface is active. This callback does nothing more
than saving the new interface type to vif and wdev, so the
sanity check for interface state and wmi state is not necessary.
This makes the AP interface functional again after interface down/up.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:51:12 +02:00
Raja Mani
542c519a0e ath6kl: Clear WPS ctrl flag if zero length IE is received from cfg80211
Connect control flag CONNECT_WPS_FLAG has to be cleared
by default even if the driver receives zero length IE
from cfg80211.

Otherwise this flag would be always set after WPS exchange
which would lead wpa_supplicant to fail to connect with
the received WPS credentials. This issue is observed only
in OPEN security.

kvalo: use cfg80211 instead of CFG in the commit log

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:39:39 +02:00
Kalle Valo
368b1b0f4b ath6kl: add firmware IE for maximum number of vifs
Not all firmwares support multiple vifs and we need to read the limit from
the firmware image.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:34 +02:00
Kalle Valo
71f96ee6c6 ath6kl: make maximum number of vifs runtime configurable
Needed when detecting how many vifs firmware supports.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:34 +02:00
Kalle Valo
d1a9421ddc ath6kl: add firmware filename info to struct ath6kl_hw
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:34 +02:00
Kalle Valo
f0ea5d588a ath6kl: add ar6004 firmwares to sdio module
When adding ar6004 SDIO support I forgot to add corresponding
MODULE_FIRMWARE() definitions to sdio.c.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:34 +02:00
Kalle Valo
0d0192babc ath6kl: use hardware version names consistently
Part of ath6kl uses "REV3" style of naming hardware versions and elsewhere
"hw 2.1.1" is used instead for the same version. This is confusing, use
the latter term everywhere.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Kalle Valo
293badf4e2 ath6kl: add name field to struct ath6kl_hw
To make it easier to print name for each hardware type. Also move the hw
info print to ath6kl_init_hw_start() which is more logical place for it.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Kalle Valo
03ef0250ae ath6kl: add firmware IE for board data address
Board data address can change between firmwares so we need to read that
from the firmware image.

Also fix debug log for the patch address to print the address in hex.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Kalle Valo
0d4d72bf8e ath6kl: add board address to struct ath6kl_hw
This is to make it configurable by firmware IEs. Also determine if we need
to write or read the board address to the chip by checking if board address
is set or not.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Kalle Valo
856f4b313a ath6kl: move hw version related to parameters to struct
It's easier to handle the values when they are defined in a struct.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Kalle Valo
f275dc7117 ath6kl: remove hw version related parameter defines
Having separate defines, in a different file, makes it difficult to read
the actual values. As we are just setting named fields in a struct
the defines don't make any sense anymore.

There are no functional changes, only moving of constants.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2011-11-16 10:22:33 +02:00
Shaohua Li
019ceb7d5d block: add missed trace_block_plug
After flush plug list, the list has no request, so we need to add a
trace_block_plug().

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Dan Carpenter
a2c2a0e668 paride: fix potential information leak in pg_read()
Smatch has a new check for Rosenberg type information leaks where structs
are copied to the user with uninitialized stack data in them.  i In this
case, the pg_write_hdr struct has a hole in it.

struct pg_write_hdr {
        char                       magic;                /*     0     1 */
        char                       func;                 /*     1     1 */
        /* XXX 2 bytes hole, try to pack */
        int                        dlen;                 /*     4     4 */

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tim Waugh <tim@cyberelk.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Dan Carpenter
121f099412 bio: change some signed vars to unsigned
This is just a cleanup patch to silence a static checker warning.

The problem is that we cap "nr_iovecs" so it can't be larger than
"UIO_MAXIOV" but we don't check for negative values.  It turns out this is
prevented at other layers, but logically it doesn't make sense to have
negative nr_iovecs so making it unsigned is nicer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Shaohua Li
3540d5e89b block: avoid unnecessary plug list flush
get_request_wait() could sleep and flush the plug list.  If the list is
already flushed, don't flush again.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Reviewed-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:50 +01:00
Stephen M. Cameron
0007a4c90a cciss: auto engage SCSI mid layer at driver load time
A long time ago, probably in 2002, one of the distros, or maybe more than
one, loaded block drivers prior to loading the SCSI mid layer.  This meant
that the cciss driver, being a block driver, could not engage the SCSI mid
layer at init time without panicking, and relied on being poked by a
userland program after the system was up (and the SCSI mid layer was
therefore present) to engage the SCSI mid layer.

This is no longer the case, and cciss can safely rely on the SCSI mid
layer being present at init time and engage the SCSI mid layer straight
away.  This means that users will see their tape drives and medium
changers at driver load time without need for a script in /etc/rc.d that
does this:

for x in /proc/driver/cciss/cciss*
do
	echo "engage scsi" > $x
done

However, if no tape drives or medium changers are detected, the SCSI mid
layer will not be engaged.  If a tape drive or medium change is later
hot-added to the system it will then be necessary to use the above script
or similar for the device(s) to be acceesible.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:49 +01:00
Dmitry Monakhov
7035b5df3c loop: cleanup set_status interface
1) Anyone who has read access to loopdev has permission to call set_status
   and may change important parameters such as lo_offset, lo_sizelimit and
   so on, which contradicts to read access pattern and definitely equals
   to write access pattern.
2) Add lo_offset over i_size check to prevent blkdev_size overflow.
   ##Testcase_bagin
   #dd if=/dev/zero of=./file bs=1k count=1
   #losetup /dev/loop0 ./file
   /* userspace_application */
   struct loop_info64 loinf;
   fd = open("/dev/loop0", O_RDONLY);
   ioctl(fd, LOOP_GET_STATUS64, &loinf);
   /* Set offset to any value which is bigger than i_size, and sizelimit
    * to nonzero value*/
   loinf.lo_offset = 4096*1024;
   loinf.lo_sizelimit = 1024;
   ioctl(fd, LOOP_SET_STATUS64, &loinf);
   /* After this loop device will have size similar to 0x7fffffffffxxxx */
   #blockdev --getsz /dev/loop0
   ##OUTPUT: 36028797018955968
   ##Testcase_end

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:49 +01:00
Stephen Rothwell
0c614e2d3e include/linux/bio.h: use a static inline function for bio_integrity_clone()
When CONFIG_BLK_DEV_INTEGRITY is not set, we get these warnings:

drivers/md/dm.c: In function 'split_bvec':
drivers/md/dm.c:1061:3: warning: statement with no effect
drivers/md/dm.c: In function 'clone_bio':
drivers/md/dm.c:1088:3: warning: statement with no effect

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:48 +01:00
Dmitry Monakhov
3bb9068278 loop: prevent information leak after failed read
If read was not fully successful we have to fail whole bio to prevent
information leak of old pages

##Testcase_begin
dd if=/dev/zero of=./file bs=1M count=1
losetup /dev/loop0 ./file -o 4096
truncate -s 0 ./file
# OOps loop offset is now beyond i_size, so read will silently fail.
# So bio's pages would not be cleared, may which result in information leak.
hexdump -C /dev/loop0
##testcase_end

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2011-11-16 09:21:48 +01:00
Richard Weinberger
60686317da sched: Fix comment for requeue_rt_entity
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321117677-3282-1-git-send-email-richard@nod.at
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-16 08:48:27 +01:00
Andrew Vagin
a3e5d1091c sched: Don't call task_group() too many times in set_task_rq()
It improves perfomance, especially if autogroup is enabled.

The size of set_task_rq() was 0x180 and now it is 0xa0.

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Paul Turner <pjt@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1321020240-3874331-1-git-send-email-avagin@openvz.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-16 08:48:24 +01:00