The function "scheduler_tick" was renamed to "sched_tick" and a selftest
that used that function for testing function trace filtering used that
function as part of the test.
But the change causes it to fail when run on older kernels. As tests
should not fail on older kernels, add a check to see which name is
available before testing.
Fixes: 86dd6c04ef ("sched/balancing: Rename scheduler_tick() => sched_tick()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Make timespec pointers, pointers to const in checklist function. As a
consequence, make list parameter in checklist function pointer to const
as well. Const-correctness increases readability.
Improvement was found by running cppcheck tool on the patched file as
follows:
```
cppcheck --enable=all \
tools/testing/selftests/timers/threadtest.c \
--suppress=missingIncludeSystem \
--suppress=unusedFunction
```
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The overflow/underflow conditions in pata_macio_qc_prep() should never
happen. But if they do there's no need to kill the system entirely, a
WARN and failing the IO request should be sufficient and might allow the
system to keep running.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Kolbjørn and Jonáš reported that their 32-bit PowerMacs were crashing
in pata-macio since commit 09fe2bfa6b ("ata: pata_macio: Fix
max_segment_size with PAGE_SIZE == 64K").
For example:
kernel BUG at drivers/ata/pata_macio.c:544!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=4K MMU=Hash SMP NR_CPUS=2 DEBUG_PAGEALLOC PowerMac
...
NIP pata_macio_qc_prep+0xf4/0x190
LR pata_macio_qc_prep+0xfc/0x190
Call Trace:
0xc1421660 (unreliable)
ata_qc_issue+0x14c/0x2d4
__ata_scsi_queuecmd+0x200/0x53c
ata_scsi_queuecmd+0x50/0xe0
scsi_queue_rq+0x788/0xb1c
__blk_mq_issue_directly+0x58/0xf4
blk_mq_plug_issue_direct+0x8c/0x1b4
blk_mq_flush_plug_list.part.0+0x584/0x5e0
__blk_flush_plug+0xf8/0x194
__submit_bio+0x1b8/0x2e0
submit_bio_noacct_nocheck+0x230/0x304
btrfs_work_helper+0x200/0x338
process_one_work+0x1a8/0x338
worker_thread+0x364/0x4c0
kthread+0x100/0x104
start_kernel_thread+0x10/0x14
That commit increased max_segment_size to 64KB, with the justification
that the SCSI core was already using that size when PAGE_SIZE == 64KB,
and that there was existing logic to split over-sized requests.
However with a sufficiently large request, the splitting logic causes
each sg to be split into two commands in the DMA table, leading to
overflow of the DMA table, triggering the BUG_ON().
With default settings the bug doesn't trigger, because the request size
is limited by max_sectors_kb == 1280, however max_sectors_kb can be
increased, and apparently some distros do that by default using udev
rules.
Fix the bug for 4KB kernels by reverting to the old max_segment_size.
For 64KB kernels the sg_tablesize needs to be halved, to allow for the
possibility that each sg will be split into two.
Fixes: 09fe2bfa6b ("ata: pata_macio: Fix max_segment_size with PAGE_SIZE == 64K")
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Closes: https://lore.kernel.org/all/62d248bb-e97a-25d2-bcf2-9160c518cae5@kolla.no/
Reported-by: Jonáš Vidra <vidra@ufal.mff.cuni.cz>
Closes: https://lore.kernel.org/all/3b6441b8-06e6-45da-9e55-f92f2c86933e@ufal.mff.cuni.cz/
Tested-by: Kolbjørn Barmen <linux-ppc@kolla.no>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
The driver needs to wait for the on board firmware
to finish its initialization before probing the card.
Commit 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
switched from using msleep() to using usleep_range() which
seems to have caused init failures on some navi1x boards. Switch
back to msleep().
Fixes: 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ma Jun <Jun.Ma2@amd.com>
(cherry picked from commit c69b07f7bb)
Cc: stable@vger.kernel.org # 6.10.x
Checksum of xattr block is always crc32c(uuid+blknum+xattrblock), see
ext4_xattr_block_csum_set for detail. Remove incorrect comment that
"id = inum if refcount=1".
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://patch.msgid.link/20240606125508.1459893-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The workaround seems to cause stability issues on other
SDMA 5.2.x IPs.
Fixes: a03ebf1163 ("drm/amdgpu/sdma5.2: Update wptr registers as well as doorbell")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3556
Acked-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2dc3851ef7)
Cc: stable@vger.kernel.org
Skip rlc firmware validation to ignore firmware header size mismatch issues.
This restores the workaround added in
commit 849e133c97 ("drm/amdgpu: Fix the null pointer when load rlc firmware")
Fixes: 3af2c80ae2 ("drm/amdgpu: refine gfx10 firmware loading")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3551
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 89ec85d16e)
Otherwise we can fail to drop the software mutex when
we fail to take the hardware mutex.
Fixes: 76acba7b7f ("drm/amdgpu/gfx11: add a mutex for the gfx semaphore")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This resolves the dereference null return value warning
reported by Coverity.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when use cpu to do page table update under sriov runtime, since mmio
access is blocked, kiq has to be used to flush hdp.
change WREG32_NO_KIQ to WREG32 to allow kiq.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver needs to wait for the on board firmware
to finish its initialization before probing the card.
Commit 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
switched from using msleep() to using usleep_range() which
seems to have caused init failures on some navi1x boards. Switch
back to msleep().
Fixes: 959056982a ("drm/amdgpu: Fix discovery initialization failure during pci rescan")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3559
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3500
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Ma Jun <Jun.Ma2@amd.com>
- Various DML 2.1 fixes
- Fix module unload
- Fix construct_phy with MXM connector
- Support UHBR10 link rate on eDP
- Revert updated DCCG wrappers
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
DML2.1 reintegration for several fixes and updates to the DML
code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Roman Li <roman.li@amd
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Causes hard hangs when resuming after display off on extended/duplicate
modes
[How]
Set the min dispclk to 50Mhz for DCN35
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
The call to construct_phy will fail in cases where connector type is
MXM, and the dc_link won't be properly created/initialized.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Supporting UHBR10 link rate on eDP leverages
the existing DP2.0 code but need to add some small
adjustments in code.
[how]
Acknowledge the given DPCD caps for UHBR10
link rate support and allow DP2.0 programming
sequence and link training for eDP.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung Joon Kim <Sungjoon.Kim@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN4 Cursor has separate degamma block and should always
do Cursor degamma for Cursor color modes.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
eDP 2.0 is introducing support for UHBR link rates, however current eDP ILR
link optimization does not account for UHBR capabilities.
Either UHBR capabilities will be provided via the same 128b/132b rate DPCD caps
that are currently used on DP2.1, or Table 4-13 may be updated to include UHBR
rates.
[HOW]
Add extra Supported Link Rates table translations for UHBR10/13.5/20.
Update eDP link setting optimization search to be aware of 128b/132b DPCD
rate caps in order to unblock UHBR on panels with Supported Link Rates table.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removing redundant condition.
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Nicholas Susanto <Nicholas.Susanto@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previous multi-display HPO fix moved where HPO I/O enable/disable is performed.
The codepath now taken to enable/disable HPO I/O is not used for compliance
test automation, meaning that if a compliance box being driven at a DP1 rate
requests retrain at UHBR, HPO I/O will remain off if it was previously off.
[HOW]
Explicitly update HPO I/O after allocating encoders for test request.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Revert updated DCCG wrappers due to regression
[How]
This reverts commit 680458d41a.
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Based on the recommendation of MEC FW, update BadOpcode interrupt
handling by unmapping all queues, removing the queue that got the
interrupt from scheduling and remapping rest of the queues back when
using MES scheduler. This is done to prevent the case where unmapping
of the bad queue can fail thereby causing a GPU reset.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC FW expects MES to unmap all queues when a VM fault is observed
on a queue and then resumed once the affected process is terminated.
Use the MES Suspend and Resume APIs to achieve this.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add implementation for MES Suspend and Resume APIs to unmap/map
all queues for GFX11. Support for GFX12 will be added when the
corresponding firmware support is in place.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu enable enforce_isolation, KFD enables single-process mode in
HWS and sets exec_cleaner_shader bit in MAP_PROCESS.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v9_4_3 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
The commit also includes a check for the type of the ring. If the type
of the ring is `AMDGPU_RING_TYPE_COMPUTE`, the `xcp_id` of the
`enforce_isolation` structure in the `gfx` structure of the
`amdgpu_device` is set to the `xcp_id` of the ring. This ensures that
the correct `xcp_id` is used when enforcing isolation on compute rings.
The `xcp_id` is an identifier for an XCP partition, and different rings
can be associated with different XCP partitions.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
This commit applies isolation enforcement to the GFX and Compute rings
in the gfx_v9_0 module.
The commit sets `amdgpu_gfx_enforce_isolation_ring_begin_use` and
`amdgpu_gfx_enforce_isolation_ring_end_use` as the functions to be
called when a ring begins and ends its use, respectively.
`amdgpu_gfx_enforce_isolation_ring_begin_use` is called when a ring
begins its use. This function cancels any scheduled
`enforce_isolation_work` and, if necessary, signals the Kernel Fusion
Driver (KFD) to stop the runqueue.
`amdgpu_gfx_enforce_isolation_ring_end_use` is called when a ring ends
its use. This function schedules `enforce_isolation_work` to be run
after a delay.
These functions are part of the Enforce Isolation Handler, which
enforces shader isolation on AMD GPUs to prevent data leakage between
different processes.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
This commit introduces the Enforce Isolation Handler designed to enforce
shader isolation on AMD GPUs, which helps to prevent data leakage
between different processes.
The handler counts the number of emitted fences for each GFX and compute
ring. If there are any fences, it schedules the `enforce_isolation_work`
to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences,
it signals the Kernel Fusion Driver (KFD) to resume the runqueue.
The function is synchronized using the `enforce_isolation_mutex`.
This commit also introduces a reference count mechanism
(kfd_sch_req_count) to keep track of the number of requests to enable
the KFD scheduler. When a request to enable the KFD scheduler is made,
the reference count is decremented. When the reference count reaches
zero, a delayed work is scheduled to enforce isolation after a delay of
GFX_SLICE_PERIOD.
When a request to disable the KFD scheduler is made, the function first
checks if the reference count is zero. If it is, it cancels the delayed
work for enforcing isolation and checks if the KFD scheduler is active.
If the KFD scheduler is active, it sends a request to stop the KFD
scheduler and sets the KFD scheduler state to inactive. Then, it
increments the reference count.
The function is synchronized using the kfd_sch_mutex to ensure that the
KFD scheduler state and reference count are updated atomically.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Provide amdgpu_amdkfd_stop_sched() for amdgpu to stop KFD scheduling
compute work on HIQ. amdgpu_amdkfd_start_sched() resumes the scheduling.
When amdgpu_amdkfd_stop_sched is called, KFD will unmap queues from
runlist. If users send ioctls to KFD to create queues, they'll be added
but those queues won't be mapped to runlist (so not scheduled) until
amdgpu_amdkfd_start_sched is called.
v2: fix build (Alex)
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit extends the cleaner shader feature to support GFX9.4.4
hardware.
The cleaner shader feature is used to clear or initialize certain GPU
resources, such as Local Data Share (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs). This
operation needs to be performed in isolation, while no other tasks
should be running on the GPU at the same time.
Previously, the cleaner shader feature was implemented for GFX9.4.3
hardware. This commit adds support for GFX9.4.4 hardware by allowing the
cleaner shader to be used with this hardware version.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the cleaner shader microcode for GFX9.4.3 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_9_4_3_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This addition is part of the cleaner shader feature implementation. The
cleaner shader feature helps improve GPU performance and resource
utilization by cleaning up GPU resources after they are used. It also
enhances security and reliability by preventing data leaks between
workloads.
v2: fix copyright date (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch modifies the gfx_v9_4_3_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v9_4_3_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v9_4_3 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v9_4_3_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The patch modifies the gfx_v9_0_kiq_set_resources function to write
the cleaner shader's memory controller address to the ring buffer. It
also adds a new function, gfx_v9_0_ring_emit_cleaner_shader, which
emits the PACKET3_RUN_CLEANER_SHADER packet to the ring buffer.
This patch adds support for the PACKET3_RUN_CLEANER_SHADER packet in the
gfx_v9_0 module. This packet is used to emit the cleaner shader, which
is used to clear GPU memory before it's reused, helping to prevent data
leakage between different processes.
Finally, the patch updates the ring function structures to include the
new gfx_v9_0_ring_emit_cleaner_shader function. This allows the
cleaner shader to be emitted as part of the ring's operations.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the PACKET3_RUN_CLEANER_SHADER definition. This packet
is a command packet used to instruct the GPU to execute the cleaner
shader.
The cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs). Clearing these resources is important for ensuring data
isolation between different workloads running on the GPU.
The PACKET3_RUN_CLEANER_SHADER packet is used to trigger the execution
of the cleaner shader on the GPU. The packet consists of a header
followed by a RESERVED field, which is programmed to zero. When the GPU
receives this packet, it fetches and executes the cleaner shader
instructions from the location specified in the packet.
The cleaner shader feature helps to enhances security and reliability by
preventing data leaks between workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new sysfs interface for running the cleaner shader on
AMD GPUs. The cleaner shader is used to clear GPU memory before it's
reused, which can help prevent data leakage between different processes.
The new sysfs file is write-only and is named `run_cleaner_shader`.
Write the number of the partition to this file to trigger the cleaner shader
on that partition. There is only one partition on GPUs which do not
support partitioning.
Changes made in this patch:
- Added `amdgpu_set_run_cleaner_shader` function to handle writes to the
`run_cleaner_shader` sysfs file.
- Added `run_cleaner_shader` to the list of device attributes in
`amdgpu_device_attrs`.
- Updated `default_attr_update` to handle `run_cleaner_shader`.
- Added `AMDGPU_DEVICE_ATTR_WO` macro to create write-only device
attributes.
v2: fix error handling (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
This commit adds a new sysfs attribute 'enforce_isolation' to control
the 'enforce_isolation' setting per GPU. The attribute can be read and
written, and accepts values 0 (disabled) and 1 (enabled).
When 'enforce_isolation' is enabled, reserved VMIDs are allocated for
each ring. When it's disabled, the reserved VMIDs are freed.
The set function locks a mutex before changing the 'enforce_isolation'
flag and the VMIDs, and unlocks it afterwards. This ensures that these
operations are atomic and prevents race conditions and other concurrency
issues.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds a new parameter 'enforce_isolation' to the amdgpu_job
structure. This parameter is used to determine whether shader isolation
should be enforced for a job. The enforce_isolation parameter is then
stored in the amdgpu_job structure and used when flushing the VM.
The enforce_isolation field of the amdgpu_job structure is set directly
after the job is allocated
This change allows more fine-grained control over shader isolation,
making it possible to enforce isolation on a per-job basis rather than
globally. This can be useful in scenarios where only certain jobs
require isolation.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmbFEVcACgkQiiy9cAdy
T1HTuwwAhrytPPcehlov1/zodtuvYshf/+tTm0LyK2M4qx4kI9S2szRyESxyH/Q8
HgwjZ2lkXRv5fFscZz1BcRQwxc4/QinljSMgbM6CW3h9C6r9QQGyX+RLz4x7Uzmx
RcNqJF/OT/Zb/WGxBDWEB8lrt9XR4FRoH1wOYT5lzEJAYQPthR3d5TmCX+4TShiR
NbBkZdDY62yWIVED7hKibHIfhE1ehRH9YYCXYieyCo676k4X1O6bADhvo4/R1Vgo
hDikRE/gMm4PZj3+Dfe80r+3plp6B/YF3BfZlWLItVpPAEyeT4SqNKY6yukDGIzX
4c0husB5NWOiqYm0PSUX8vsS+aAww6bc53inqHFC9E9JQd55W9wsIgwzksr2RFZm
FkVDeemxENsIpGibaP+P3sGjDPp36oMTZWjxAnE9W+SmnK42bgkesDRsBM9myrU+
sNstwuEr5QMht4tQ6tlWpB+yjGIbS6doLhrxoPu79ayWDTSYRUYcaaH5Tew2wXjC
obF6p3bk
=QWAI
-----END PGP SIGNATURE-----
Merge tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- important reconnect fix
- fix for memcpy issues on mount
- two minor cleanup patches
* tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Replace one-element arrays with flexible-array members
ksmbd: fix spelling mistakes in documentation
ksmbd: fix race condition between destroy_previous_session() and smb2 operations()
ksmbd: Use unsafe_memcpy() for ntlm_negotiate
The macro parameter 'entry' of EXT4_DIRENT_HASH and
EXT4_DIRENT_MINOR_HASH was not used, but rather the variable 'de' was
directly used, which may be a local variable inside a function that
calls the macros. Fortunately, all callers have passed in 'de' so
far, so this bug didn't have an effect.
Signed-off-by: carrion bent <carrionbent@linux.alibaba.com>
Link: https://patch.msgid.link/1717652596-58760-1-git-send-email-carrionbent@linux.alibaba.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Using pahole, we can see that there are some padding holes
in the current ext4_inode_info structure. Adjusting the
layout of ext4_inode_info can reduce these holes,
resulting in the size of the structure decreasing
from 2424 bytes to 2408 bytes.
Signed-off-by: Junchao Sun <sunjunchao2870@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20240603131524.324224-1-sunjunchao2870@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This file already uses sysfs_emit(). So be consistent and also use
sysfs_emit_at().
This slightly simplifies the code and makes it more readable.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
