'struct linear_range' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
This is also more consistent with the other struct linear_range declaration
above.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
20767 4544 0 25311 62df drivers/regulator/bd9576-regulator.o
After:
=====
text data bss dec hex filename
21023 4288 0 25311 62df drivers/regulator/bd9576-regulator.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/a4e37991ea7b47145ab033128c8dd49f73a983e6.1722949232.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
For rockchip rk3288 and rk3399, the display driver is rockchip
and gpu driver is panfrost. Currently, in drm-ci for rockchip
rk3288 and rk3399, only the gpu driver is tested. Refactor
the existing rockchip jobs to test both display and gpu driver
and update xfails.
Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for rockchip jobs.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-7-vignesh.raman@collabora.com
For Amlogic Meson G12B (A311D) SOC the display driver is meson and
gpu driver is panfrost. Currently, in drm-ci for Meson G12B (A311D),
only the gpu driver is tested. Refactor the existing meson jobs
and add support in drm-ci to test both display and gpu driver for
Amlogic Meson G12B (A311D) and update xfails.
Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for meson jobs.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-6-vignesh.raman@collabora.com
For mediatek mt8173, the display driver is mediatek, while the
gpu driver is powervr. Currently, in drm-ci for mt8173, only the
display driver is tested. Add support in drm-ci to test powervr
driver for mt8173. Powervr driver was merged in linux kernel,
but there's no mediatek support yet. So disable the powervr:mt8173
job which uses powervr driver.
Also update the MAINTAINERS file to include xfails for powervr driver.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-5-vignesh.raman@collabora.com
For mediatek mt8183, the display driver is mediatek, while the
gpu driver is panfrost. Currently, in drm-ci for mt8183, only
the gpu driver is tested. Refactor the existing mediatek jobs
and add support in drm-ci to test both display and gpu driver
for mt8183 and update xfails.
Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for mediatek jobs.
Update the MAINTAINERS file to include xfails for panfrost driver.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-4-vignesh.raman@collabora.com
tools_test is a wrapper for running tools/intel_reg
and tools/intel_l3_parity. So skip these tests on
non-intel platforms and update expectaion files.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-3-vignesh.raman@collabora.com
Enable CONFIG_DRM_ANALOGIX_ANX7625 in the arm64 defconfig to get
display driver probed on the mt8183-kukui-jacuzzi-juniper machine.
arch/arm64/configs/defconfig has CONFIG_DRM_ANALOGIX_ANX7625=m,
but drm-ci don't have initrd with modules, so add
CONFIG_DRM_ANALOGIX_ANX7625=y in CI arm64 config.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-2-vignesh.raman@collabora.com
commit edf2d546bf ("riscv: patch: Flush the icache right after
patching to avoid illegal insns") mistakenly removed the global icache
flush in patch_text_nosync() and patch_text_set_nosync() functions, so
reintroduce them.
Fixes: edf2d546bf ("riscv: patch: Flush the icache right after patching to avoid illegal insns")
Reported-by: Samuel Holland <samuel.holland@sifive.com>
Closes: https://lore.kernel.org/linux-riscv/a28ddc26-d77a-470a-a33f-88144f717e86@sifive.com/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240801191404.55181-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Duplicate event names break invariants in 'perf list'. Assert that an
event name isn't duplicated so that broken JSON won't build.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Charles Ci-Jyun Wu <dminus@andestech.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inochi Amaoto <inochiama@outlook.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Locus Wei-Han Chen <locus84@andestech.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240805194424.597244-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
OP_SPEC is repeated twice in the file which will break invariants in
'perf list' as discussed in this thread:
https://lore.kernel.org/linux-perf-users/20240719081651.24853-1-eric.lin@sifive.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Charles Ci-Jyun Wu <dminus@andestech.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inochi Amaoto <inochiama@outlook.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Locus Wei-Han Chen <locus84@andestech.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240805194424.597244-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from $? (all the prerequisites that are newer than the target)
to $^ (all the prerequisites) as touching jevents.py will mean that
empty-pmu-events.c won't be passed to the diff command breaking the
build.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Charles Ci-Jyun Wu <dminus@andestech.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inochi Amaoto <inochiama@outlook.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Locus Wei-Han Chen <locus84@andestech.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240805194424.597244-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building with JEVENTS_ARCH=all builds all CPU types and allows things
like assertions to check the validity of the input JSON.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Atish Patra <atishp@rivosinc.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Charles Ci-Jyun Wu <dminus@andestech.com>
Cc: Eric Lin <eric.lin@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Guilherme Amadio <amadio@gentoo.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Inochi Amaoto <inochiama@outlook.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Locus Wei-Han Chen <locus84@andestech.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Samuel Holland <samuel.holland@sifive.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Will Deacon <will@kernel.org>
Cc: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240805194424.597244-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Having no in-kernel devices that use !DRM_BRIDGE_ATTACH_NO_CONNECTOR
mode for the Lontium LT9611UXC bridge, drop the in-bridge implementation
of the drm_connector.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240701-lt9611uxc-next-bridge-v1-2-665bce5fdaaa@linaro.org
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-3-david@davidgow.net
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c37 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-2-david@davidgow.net
Bespoke trigger support was added when Linux v3.5 by this patch.
commit 07bf84aaf7
("ASoC: dpcm: Add bespoke trigger()")
test-component driver is using it, but this is because it indicates used
function for debug/trace purpose. Except test-component driver, bespoke
trigger has never been used over 10 years in upstream.
We can re-support it if needed in the future, but let's remove it for now,
because it just noise in upstream.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87v80ewmdi.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
This pair of patches extend wm_adsp to add a callback that can be used
to control whether ALSA controls are added and then tweak cs35l56 to use
it to suppress controls made from firmware coefficients.
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af18 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c50 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
(cherry picked from commit 97b6784753)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com
(cherry picked from commit 60a2066c50)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Calculating the size of the mapped area as the lesser value
between the requested size and the actual size does not consider
the partial mapping offset. This can cause page fault access.
Fix the calculation of the starting and ending addresses, the
total size is now deduced from the difference between the end and
start addresses.
Additionally, the calculations have been rewritten in a clearer
and more understandable form.
Fixes: c58305af18 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass")
Reported-by: Jann Horn <jannh@google.com>
Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Jonathan Cavitt <Jonathan.cavitt@intel.com>
[Joonas: Add Requires: tag]
Requires: 60a2066c50 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset")
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.shyti@linux.intel.com
When mapping a framebuffer object, the virtual memory area (VMA)
offset ('vm_pgoff') should be adjusted by the start of the
'vma_node' associated with the object. This ensures that the VMA
offset is correctly aligned with the corresponding offset within
the GGTT aperture.
Increment vm_pgoff by the start of the vma_node with the offset=
provided by the user.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.9+
[Joonas: Add Cc: stable]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-2-andi.shyti@linux.intel.com
Currently ARM64 extracts which specific sanitizer has caused a trap via
encoded data in the trap instruction. Clang on x86 currently encodes the
same data in the UD1 instruction but x86 handle_bug() and
is_valid_bugaddr() currently only look at UD2.
Bring x86 to parity with ARM64, similar to commit 25b84002af ("arm64:
Support Clang UBSAN trap codes for better reporting"). See the llvm
links for information about the code generation.
Enable the reporting of UBSAN sanitizer details on x86 compiled with clang
when CONFIG_UBSAN_TRAP=y by analysing UD1 and retrieving the type immediate
which is encoded by the compiler after the UD1.
[ tglx: Simplified it by moving the printk() into handle_bug() ]
Signed-off-by: Gatlin Newhouse <gatlin.newhouse@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20240724000206.451425-1-gatlin.newhouse@gmail.com
Link: c5978f42ec (diff-bb68d7cd88)
Link: https://github.com/llvm/llvm-project/blob/main/llvm/lib/Target/X86/X86InstrSystem.td#L27
Corsola firmware reserves the memory region of [0x60000000, 0x61100000)
exclusively for ADSP usage.
But in fact, a 6 MB "hole" of [0x60A00000, 0x61000000) didn't get
assigned to the ADSP node in the Corsola device tree, meaning no audio
tasks can access and utilize that memory section.
Update the reserved ADSP memory region to fill the gap.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240719045823.3264974-1-fshao@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The Display Engine's DSC register values are deducted from the DSC
configuration stored in intel_crtc_state::dsc. The latter one is
dumped in a human-readable format, so dumping the register values is
redundant, remove it.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-8-imre.deak@intel.com
Replace the BPP_X16_FMT()/ARGS() helpers defined by the driver with the
equivalent FXP_Q4_FMT()/ARGS() helpers defined by DRM core.
v2: Rebase on the s/DRM_X16/FXP_Q4 change.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-6-imre.deak@intel.com
Replace the to_bpp_int_roundup() helper defined by the driver with the
equivalent fxp_q4_to_int_roundup() helper defined by DRM core.
v2: Rebase on s/drm_x16/fxp_q4 change.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805150802.3568970-4-imre.deak@intel.com
This clock dependency introduced a mutual dependency between mfg_async
power domain and mt8183-mfgcfg clock, and Mediatek has confirmed that
this dependency is not needed. Remove this to avoid potential deadlock.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Fixes: 37fb78b9ae ("arm64: dts: mediatek: Add mt8183 power domains controller")
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240805065051.3129354-1-treapking@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Some regulators in the kukui device tree are modeled incorrectly. Some
are missing supplies and some switches are incorrectly modeled as
voltage regulators. A pass-through was incorrectly modeled as a
regulator.
Add supplies where missing, remove voltage constraints for "switches",
and drop the "bl_pp5000" pass-through.
This depends on commit 2a99858c17 ("arm64: dts: mediatek: mt8183-kukui:
Add PMIC regulator supplies") for reg_vsys.
Fixes: cd894e274b ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: f15722c0fe ("arm64: dts: mt8183: Add pwm and backlight node")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240625095441.3474194-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT7981 (Filogic 820) has three on-SoC SPI controllers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240727114828.29558-2-zajec5@gmail.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8183's Devicetree describes two eFuse regions: one at 8000000 and
another at 11f10000.
The efuse at 8000000, unlike the one at 11f10000 and the efuse on all
other MediaTek SoCs, does not define any cell, including the
socinfo-data ones which the mtk-efuse driver expects to always be
present, resulting in the following errors in the log:
mtk-socinfo mtk-socinfo.0.auto: error -ENOENT: Failed to get socinfo data
mtk-socinfo mtk-socinfo.0.auto: probe with driver mtk-socinfo failed with error -2
The efuse at 8000000 is disabled by default but enabled on mt8183-kukui.
Since it is unused, and to prevent the errors from being thrown, disable
it on mt8183-kukui.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240803-mtk-socinfo-no-data-probe-err-v3-1-09cfffc7241a@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Inspired by the vendor kernel but adapted to the upstream thermal
driver version.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-6-8c8e3c7a3643@baylibre.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Inspired by the vendor kernel but adapted to the upstream thermal
driver version.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-4-8c8e3c7a3643@baylibre.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Marc Kleine-Budde <mkl@pengutronix.de> says:
When changing from CAN-CC to CAN-FD mode the ring and/or coalescing
parameters might be too big.
This series fixes the problem and adds a safeguard to detect broken
coalescing configuration.
Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-0-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When changing the interface from CAN-CC to CAN-FD mode the old
coalescing parameters are re-used. This might cause problem, as the
configured parameters are too big for CAN-FD mode.
During testing an invalid TX coalescing configuration has been seen.
The problem should be been fixed in the previous patch, but add a
safeguard here to ensure that the number of TEF coalescing buffers (if
configured) is exactly the half of all TEF buffers.
Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-2-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If the ring (rx, tx) and/or coalescing parameters (rx-frames-irq,
tx-frames-irq) have been configured while the interface was in CAN-CC
mode, but the interface is brought up in CAN-FD mode, the ring
parameters might be too big.
Use the default CAN-FD values in this case.
Fixes: 9263c2e92b ("can: mcp251xfd: ring: add support for runtime configurable RX/TX ring parameters")
Link: https://lore.kernel.org/all/20240805-mcp251xfd-fix-ringconfig-v1-1-72086f0ca5ee@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The use of coalescing for non-peripheral chips in the current
implementation is limited to non-existing. Disable the possibility to
set coalescing through ethtool.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-8-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
To force writing the enabled interrupts, reset the active_interrupts
cache.
Fixes: 07f25091ca ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-7-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
active_interrupts is a cache for the enabled interrupts and not the
global masking of interrupts. Do not clear this variable otherwise we
may loose the state of the interrupts.
Fixes: 07f25091ca ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
On setups without interrupts, the interrupt handler is called from a
timer callback. For non-peripheral receives napi is scheduled,
interrupts are disabled and the timer is canceled with a blocking call.
In case of an error this can happen as well.
Check if napi is scheduled in the timer callback after the interrupt
handler executed. If napi is scheduled, the timer is disabled. It will
be reenabled by m_can_poll().
Return error values from the interrupt handler so that interrupt threads
and timer callback can deal differently with it. In case of the timer
we only disable the timer. The rest will be done when stopping the
interface.
Fixes: b382380c0d ("can: m_can: Add hrtimer to generate software interrupt")
Fixes: a163c57610 ("can: m_can: Start/Cancel polling timer together with interrupts")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
m_can_rx_peripheral() is a wrapper around m_can_rx_handler() that calls
m_can_disable_all_interrupts() on error. The same handling for the same
error path is done in m_can_isr() as well.
So remove m_can_rx_peripheral() and do the call from m_can_isr()
directly.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We don't need to disable coalescing when the interrupt handler executes
while the chip is suspended. The coalescing is already reset during
suspend.
Fixes: 07f25091ca ("can: m_can: Implement receive coalescing")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
