During resume the interrupts are limited to IR_RF0N and the chip keeps
running. In this case if coalescing is enabled and active we may miss
waterlevel interrupts during suspend. It is safer to reset the
coalescing by stopping the timer and adding IR_RF0N | IR_TEFN to the
interrupts.
This is a theoratical issue and probably extremely rare.
Cc: Martin Hundebøll <martin@geanix.com>
Fixes: 4a94d7e31c ("can: m_can: allow keeping the transceiver running in suspend")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240805183047.305630-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
It appears that the irq requested in m_can_open() may be leaked
if an error subsequently occurs: if m_can_start() fails.
Address this by calling free_irq in the unwind path for
such cases.
Flagged by Smatch.
Compile tested only.
Fixes: eaacfeaca7 ("can: m_can: Call the RAM init directly from m_can_chip_config")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240805-mcan-irq-v2-1-7154c0484819@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
HP EliteDesk 800 G4 (PCI SSID 103c:83e2) is another Kabylake machine
where BIOS misses the HDMI pin initializations. Add the quirk entry.
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240806064918.11132-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The UMP v1.1 spec says in the section 6.2.1:
"If a UMP Endpoint declares MIDI 2.0 Protocol but a Function Block
represents a MIDI 1.0 connection, then may optionally be used for
messages to/from that Function Block."
It implies that the driver can (and should) keep MIDI 1.0 CVM
exceptionally for those FBs even if UMP Endpoint is running in MIDI
2.0 protocol, and the current driver lacks of it.
This patch extends the sequencer port info to indicate a MIDI 1.0
port, and tries to send/receive MIDI 1.0 CVM as is when this port is
the source or sink. The sequencer port flag is set by the driver at
parsing FBs and GTBs although application can set it to its own
user-space clients, too.
Link: https://patch.msgid.link/20240806070024.14301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The conversion from the old unistd.h file to syscall.tbl dropped the
nfsservctl macro. This one was handled inconsistently across architectures
in the original introduction of the syscall.tbl format, and I went the
other way on this.
The syscall was already gone in linux-3.1 before the current users
of the generic table (other than openrisc) first appeared, so nobody
could actally use it, but putting the number back helps for consistency
since there are build scripts that check the presence of all these
macros.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2301919
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Before this change there were 16 vid:pid based quirks to ignore the battery
reported by Elan I2C-HID touchscreens on various Asus and HP laptops.
And a report has been received that the 04F3:2A00 I2C touchscreen on
the HP ProBook x360 11 G5 EE/86CF also reports a non present battery.
Since I2C-HID devices are always builtin to laptops they are not battery
owered so it should be safe to just ignore the battery on all Elan I2C-HID
devices, rather then adding a 17th quirk for the 04F3:2A00 touchscreen.
As reported in the changelog of commit a3a5a37efb ("HID: Ignore battery
for ELAN touchscreens 2F2C and 4116"), which added 2 new Elan touchscreen
quirks about a month ago, the HID reported battery seems to be related
to a stylus being used. But even when a stylus is in use it does not
properly report the charge of the stylus battery, instead the reported
battery charge jumps from 0% to 1%. So it is best to just ignore the
HID battery.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2302776
Cc: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We might run into a SIE validity if gisa has been disabled either via using
kernel parameter "kvm.use_gisa=0" or by setting the related sysfs
attribute to N (echo N >/sys/module/kvm/parameters/use_gisa).
The validity is caused by an invalid value in the SIE control block's
gisa designation. That happens because we pass the uninitialized gisa
origin to virt_to_phys() before writing it to the gisa designation.
To fix this we return 0 in kvm_s390_get_gisa_desc() if the origin is 0.
kvm_s390_get_gisa_desc() is used to determine which gisa designation to
set in the SIE control block. A value of 0 in the gisa designation disables
gisa usage.
The issue surfaces in the host kernel with the following kernel message as
soon a new kvm guest start is attemted.
kvm: unhandled validity intercept 0x1011
WARNING: CPU: 0 PID: 781237 at arch/s390/kvm/intercept.c:101 kvm_handle_sie_intercept+0x42e/0x4d0 [kvm]
Modules linked in: vhost_net tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT xt_tcpudp nft_compat x_tables nf_nat_tftp nf_conntrack_tftp vfio_pci_core irqbypass vhost_vsock vmw_vsock_virtio_transport_common vsock vhost vhost_iotlb kvm nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables sunrpc mlx5_ib ib_uverbs ib_core mlx5_core uvdevice s390_trng eadm_sch vfio_ccw zcrypt_cex4 mdev vfio_iommu_type1 vfio sch_fq_codel drm i2c_core loop drm_panel_orientation_quirks configfs nfnetlink lcs ctcm fsm dm_service_time ghash_s390 prng chacha_s390 libchacha aes_s390 des_s390 libdes sha3_512_s390 sha3_256_s390 sha512_s390 sha256_s390 sha1_s390 sha_common dm_mirror dm_region_hash dm_log zfcp scsi_transport_fc scsi_dh_rdac scsi_dh_emc scsi_dh_alua pkey zcrypt dm_multipath rng_core autofs4 [last unloaded: vfio_pci]
CPU: 0 PID: 781237 Comm: CPU 0/KVM Not tainted 6.10.0-08682-gcad9f11498ea #6
Hardware name: IBM 3931 A01 701 (LPAR)
Krnl PSW : 0704c00180000000 000003d93deb0122 (kvm_handle_sie_intercept+0x432/0x4d0 [kvm])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3
Krnl GPRS: 000003d900000027 000003d900000023 0000000000000028 000002cd00000000
000002d063a00900 00000359c6daf708 00000000000bebb5 0000000000001eff
000002cfd82e9000 000002cfd80bc000 0000000000001011 000003d93deda412
000003ff8962df98 000003d93de77ce0 000003d93deb011e 00000359c6daf960
Krnl Code: 000003d93deb0112: c020fffe7259 larl %r2,000003d93de7e5c4
000003d93deb0118: c0e53fa8beac brasl %r14,000003d9bd3c7e70
#000003d93deb011e: af000000 mc 0,0
>000003d93deb0122: a728ffea lhi %r2,-22
000003d93deb0126: a7f4fe24 brc 15,000003d93deafd6e
000003d93deb012a: 9101f0b0 tm 176(%r15),1
000003d93deb012e: a774fe48 brc 7,000003d93deafdbe
000003d93deb0132: 40a0f0ae sth %r10,174(%r15)
Call Trace:
[<000003d93deb0122>] kvm_handle_sie_intercept+0x432/0x4d0 [kvm]
([<000003d93deb011e>] kvm_handle_sie_intercept+0x42e/0x4d0 [kvm])
[<000003d93deacc10>] vcpu_post_run+0x1d0/0x3b0 [kvm]
[<000003d93deaceda>] __vcpu_run+0xea/0x2d0 [kvm]
[<000003d93dead9da>] kvm_arch_vcpu_ioctl_run+0x16a/0x430 [kvm]
[<000003d93de93ee0>] kvm_vcpu_ioctl+0x190/0x7c0 [kvm]
[<000003d9bd728b4e>] vfs_ioctl+0x2e/0x70
[<000003d9bd72a092>] __s390x_sys_ioctl+0xc2/0xd0
[<000003d9be0e9222>] __do_syscall+0x1f2/0x2e0
[<000003d9be0f9a90>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003d9bd3c7f58>] __warn_printk+0xe8/0xf0
Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Fixes: fe0ef00304 ("KVM: s390: sort out physical vs virtual pointers usage")
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20240801123109.2782155-1-mimu@linux.ibm.com
Message-ID: <20240801123109.2782155-1-mimu@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce the usage of strscpy, which breaks the
memblock test.
Let's define it as strcpy in userspace to fix it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-5-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce usage of isspace().
Let's include <linux/ctype.h> in kernel.h to fix this.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce the usage of memparse(), which is not
defined in memblock test.
Add the definition and link it to fix the build.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Commit 1e4c64b71c ("mm/memblock: Add "reserve_mem" to reserved named
memory at boot up") introduce usage of __setup(), which is not defined
in memblock test.
Define it in init.h to fix the build error.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Commit 94ff46de4a ("memblock: Move late alloc warning down to phys
alloc") introduce the usage of virt_to_phys(), which is not defined in
memblock tests.
Define it in mm.h to fix the build error.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Link: https://lore.kernel.org/r/20240806010319.29194-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Currently we have two test suits define its own init.h. This is a little
redundant.
Let's create a init.h in common include directory and merge these two
into it.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Liam R. Howlett <Liam.Howlett@oracle.com>
Link: https://lore.kernel.org/r/20240712035138.24674-3-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
In kernel code, linkage.h includes export.h. Let's sync with kernel.
This is a preparation for move init.h in common include directory.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240712035138.24674-2-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
In kernel code, memory_hotplug.h is included in mmzone.h instead of in
init.h. Let's sync with kernel.
This is a preparation for move init.h in common include directory.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
Link: https://lore.kernel.org/r/20240712035138.24674-1-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
When merging files without trailing newlines at the end of the file, two
config fragments end up at the same row if file1.config doens't have a
trailing newline at the end of the file.
file1.config "CONFIG_1=y"
file2.config "CONFIG_2=y"
./scripts/kconfig/merge_config.sh -m .config file1.config file2.config
This will generate a .config looking like this.
cat .config
...
CONFIG_1=yCONFIG_2=y"
Making sure so we add a newline at the end of every config file that is
passed into the script.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
I noticed that when we do discrete host router NVM upgrade and it gets
hot-removed from the PCIe side as a result of NVM firmware authentication,
if there is another host connected with enabled paths we hang in tearing
them down. This is due to fact that the Thunderbolt networking driver
also tries to cleanup the paths and ends up blocking in
tb_disconnect_xdomain_paths() waiting for the domain lock.
However, at this point we already cleaned the paths in tb_stop() so
there is really no need for tb_disconnect_xdomain_paths() to do that
anymore. Furthermore it already checks if the XDomain is unplugged and
bails out early so take advantage of that and mark the XDomain as
unplugged when we remove the parent router.
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When trying to build compile_commands.json for an external module against
the kernel built in a separate output directory, the following error is
displayed:
make[1]: *** No rule to make target 'scripts/clang-tools/gen_compile_commands.py',
needed by 'compile_commands.json'. Stop.
This is because gen_compile_commands.py was previously looked up using a
relative path to $(srctree), but commit b1992c3772 ("kbuild: use
$(src) instead of $(srctree)/$(src) for source directory") stopped
defining VPATH for external module builds.
Prefixing gen_compile_commands.py with $(srctree) fixes the problem.
Fixes: b1992c3772 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory")
Signed-off-by: Alexandre Courbot <gnurou@gmail.com>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When resolving a merge conflict, Linus noticed the fdtoverlay command
duplication introduced by commit 49636c5680 ("kbuild: verify dtoverlay
files against schema"). He suggested a clean-up.
I eliminated the duplication and refactored the code a little further.
No functional changes are intended, except for the short logs.
The log will look as follows:
$ make ARCH=arm64 defconfig dtbs_check
[ snip ]
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtb
DTC [C] arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb
DTC arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtbo
OVL [C] arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-imx219.dtb
The tag [C] indicates that the schema check is executed.
Link: https://lore.kernel.org/lkml/CAHk-=wiF3yeWehcvqY-4X7WNb8n4yw_5t0H1CpEpKi7JMjaMfw@mail.gmail.com/#t
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
cpu_pwq is used in various percpu functions that expect variable in
__percpu address space. Correct the declaration of cpu_pwq to
struct pool_workqueue __rcu * __percpu *cpu_pwq
to declare the variable as __percpu pointer.
The patch also fixes following sparse errors:
workqueue.c:380:37: warning: duplicate [noderef]
workqueue.c:380:37: error: multiple address spaces given: __rcu & __percpu
workqueue.c:2271:15: error: incompatible types in comparison expression (different address spaces):
workqueue.c:2271:15: struct pool_workqueue [noderef] __rcu *
workqueue.c:2271:15: struct pool_workqueue [noderef] __percpu *
and uncovers a couple of exisiting "incorrect type in assignment"
warnings (from __rcu address space), which this patch does not address.
Found by GCC's named address space checks.
There were no changes in the resulting object files.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When flushing a work item for cancellation, __flush_work() knows that it
exclusively owns the work item through its PENDING bit. 134874e2ee
("workqueue: Allow cancel_work_sync() and disable_work() from atomic
contexts on BH work items") added a read of @work->data to determine whether
to use busy wait for BH work items that are being canceled. While the read
is safe when @from_cancel, @work->data was read before testing @from_cancel
to simplify code structure:
data = *work_data_bits(work);
if (from_cancel &&
!WARN_ON_ONCE(data & WORK_STRUCT_PWQ) && (data & WORK_OFFQ_BH)) {
While the read data was never used if !@from_cancel, this could trigger
KCSAN data race detection spuriously:
==================================================================
BUG: KCSAN: data-race in __flush_work / __flush_work
write to 0xffff8881223aa3e8 of 8 bytes by task 3998 on cpu 0:
instrument_write include/linux/instrumented.h:41 [inline]
___set_bit include/asm-generic/bitops/instrumented-non-atomic.h:28 [inline]
insert_wq_barrier kernel/workqueue.c:3790 [inline]
start_flush_work kernel/workqueue.c:4142 [inline]
__flush_work+0x30b/0x570 kernel/workqueue.c:4178
flush_work kernel/workqueue.c:4229 [inline]
...
read to 0xffff8881223aa3e8 of 8 bytes by task 50 on cpu 1:
__flush_work+0x42a/0x570 kernel/workqueue.c:4188
flush_work kernel/workqueue.c:4229 [inline]
flush_delayed_work+0x66/0x70 kernel/workqueue.c:4251
...
value changed: 0x0000000000400000 -> 0xffff88810006c00d
Reorganize the code so that @from_cancel is tested before @work->data is
accessed. The only problem is triggering KCSAN detection spuriously. This
shouldn't need READ_ONCE() or other access qualifiers.
No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot+b3e4f2f51ed645fd5df2@syzkaller.appspotmail.com
Fixes: 134874e2ee ("workqueue: Allow cancel_work_sync() and disable_work() from atomic contexts on BH work items")
Link: http://lkml.kernel.org/r/000000000000ae429e061eea2157@google.com
Cc: Jens Axboe <axboe@kernel.dk>
- s/alloc_ordered_queue()/alloc_ordered_workqueue()/
- remove markers to convert it into a link.
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Missing, failed, or corrupted core dumps might impede crash
investigations. To improve reliability of that process and consequently
the programs themselves, one needs to trace the path from producing
a core dumpfile to analyzing it. That path starts from the core dump file
written to the disk by the kernel or to the standard input of a user
mode helper program to which the kernel streams the coredump contents.
There are cases where the kernel will interrupt writing the core out or
produce a truncated/not-well-formed core dump without leaving a note.
Add logging for the core dump collection failure paths to be able to reason
what has gone wrong when the core dump is malformed or missing.
Report the size of the data written to aid in diagnosing the user mode
helper.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240718182743.1959160-3-romank@linux.microsoft.com
Signed-off-by: Kees Cook <kees@kernel.org>
The coredump code does not log the process ID and the comm
consistently, logs unescaped comm when it does log it, and
does not always use the ratelimited logging. That makes it
harder to analyze logs and puts the system at the risk of
spamming the system log incase something crashes many times
over and over again.
Fix that by logging TGID and comm (escaped) consistently and
using the ratelimited logging always.
Signed-off-by: Roman Kisel <romank@linux.microsoft.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240718182743.1959160-2-romank@linux.microsoft.com
Signed-off-by: Kees Cook <kees@kernel.org>
Tariq Toukan says:
====================
mlx5 PTM cross timestamping support
This patchset by Rahul and Carolina adds PTM (Precision Time Measurement)
support to the mlx5 driver.
PTM is a PCI extended capability introduced by PCI-SIG for providing an
accurate read of the device clock offset without being impacted by
asymmetric bus transfer rates.
The performance of PTM on ConnectX-7 was evaluated using both real-time
(RTC) and free-running (FRC) clocks under traffic and no traffic
conditions. Tests with phc2sys measured the maximum offset values at a 50Hz
rate, with and without PTM.
Results:
1. No traffic
+-----+--------+--------+
| | No-PTM | PTM |
+-----+--------+--------+
| FRC | 125 ns | <29 ns |
+-----+--------+--------+
| RTC | 248 ns | <34 ns |
+-----+--------+--------+
2. With traffic
+-----+--------+--------+
| | No-PTM | PTM |
+-----+--------+--------+
| FRC | 254 ns | <40 ns |
+-----+--------+--------+
| RTC | 255 ns | <45 ns |
+-----+--------+--------+
v2: https://lore.kernel.org/d1dba3e1-2ecc-4fdf-a23b-7696c4bccf45@gmail.com
====================
Link: https://patch.msgid.link/20240730134055.1835261-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the kernel doesn't support enabling Precision Time Measurement
for an endpoint device, enable the PTM PCI capability in the driver.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20240730134055.1835261-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot hit a use-after-free[1] which is caused because the bridge doesn't
make sure that all previous garbage has been collected when removing a
port. What happens is:
CPU 1 CPU 2
start gc cycle remove port
acquire gc lock first
wait for lock
call br_multicasg_gc() directly
acquire lock now but free port
the port can be freed
while grp timers still
running
Make sure all previous gc cycles have finished by using flush_work before
freeing the port.
[1]
BUG: KASAN: slab-use-after-free in br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
Read of size 8 at addr ffff888071d6d000 by task syz.5.1232/9699
CPU: 1 PID: 9699 Comm: syz.5.1232 Not tainted 6.10.0-rc5-syzkaller-00021-g24ca36a562d6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/07/2024
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0xc3/0x620 mm/kasan/report.c:488
kasan_report+0xd9/0x110 mm/kasan/report.c:601
br_multicast_port_group_expired+0x4c0/0x550 net/bridge/br_multicast.c:861
call_timer_fn+0x1a3/0x610 kernel/time/timer.c:1792
expire_timers kernel/time/timer.c:1843 [inline]
__run_timers+0x74b/0xaf0 kernel/time/timer.c:2417
__run_timer_base kernel/time/timer.c:2428 [inline]
__run_timer_base kernel/time/timer.c:2421 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2437
Reported-by: syzbot+263426984509be19c9a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=263426984509be19c9a0
Fixes: e12cec65b5 ("net: bridge: mcast: destroy all entries via gc")
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20240802080730.3206303-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a couple of statements with two following semicolons,
replace these with just one semicolon.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20240802113436.448939-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their 'struct net' argument.
- udp6_lib_lookup()
- __udp6_lib_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v6()
- __inet6_lookup_established()
- inet6_lookup_reuseport()
- inet6_lookup_listener()
- inet6_lookup_run_sk_lookup()
- __inet6_lookup()
- inet6_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following helpers do not touch their 'struct net' argument.
- udp_sk_bound_dev_eq()
- udp4_lib_lookup()
- __udp4_lib_lookup()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Following helpers do not touch their struct net argument:
- bpf_sk_lookup_run_v4()
- inet_lookup_reuseport()
- inet_lhash2_lookup()
- inet_lookup_run_sk_lookup()
- __inet_lookup_listener()
- __inet_lookup_established()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
inet_sk_bound_dev_eq() and its callers do not modify the net structure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240802134029.3748005-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While the uabi_engines_llist is populated in intel_engines_init() during
driver load, the corresponding function intel_engines_release() does not
correctly get rid of it. This can lead to a UAF if, after failed
initialization (for example when gt is set wedged on init), we try to
access the engines.
Suggested-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154047.115176-2-krzysztof.niemiec@intel.com
When a reference counter is at zero and refcount_sub_and_test() is invoked
to subtract zero, the function accepts this request without any warning and
returns true. This behavior does not seem ideal because the counter being
already at zero indicates a use-after-free. Furthermore, returning true by
refcount_sub_and_test() in this case potentially results in a double-free
done by its caller.
Modify the underlying function __refcount_sub_and_test() to warn about this
case as a use-after-free and have it return false to avoid the potential
double-free.
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240717130023.5675-1-petr.pavlu@suse.com
Signed-off-by: Kees Cook <kees@kernel.org>
This kselftest fixes update consists of a single fix to the conditional
in ksft.py script which incorrectly flags a test suite failed when there
are skipped tests in the mix. The logic is fixed to take skipped tests
into account and report the test as passed.
-----BEGIN PGP SIGNATURE-----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=DeQe
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"A single fix to the conditional in ksft.py script which incorrectly
flags a test suite failed when there are skipped tests in the mix.
The logic is fixed to take skipped tests into account and report the
test as passed"
* tag 'linux_kselftest-fixes-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: ksft: Fix finished() helper exit code on skipped tests
We only set the last fence on user binds, so no need to check last fence
kernel issued binds. Will avoid blowing up last fence lockdep asserts.
Cc: Francois Dugast <francois.dugast@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805200233.3050325-1-matthew.brost@intel.com
Add new test cases to test_cpuset_prs.sh to cover corner cases reported
in previous fix commits.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the previous commit that eliminates the overlapping partition
root corner cases in the hotplug code, the partition roots passed down
to generate_sched_domains() should not have overlapping CPUs. Enable
overlapping cpuset check for v2 and warn if that happens.
This patch also has the benefit of increasing test coverage of the new
Union-Find cpuset merging code to cgroup v2.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
