Harini T <harini.t@amd.com> says:
Xilinx CAN driver supports AXI CAN, AXI CANFD, CANPS and CANFD PS IPs.
1. Modify the dt-bindings title to indicate that both controllers are
supported.
2. Document all supported IPs in driver comment description.
Link: https://lore.kernel.org/all/20240503060553.8520-1-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Xilinx CAN driver supports AXI CAN, AXI CANFD, CANPS and CANFD PS IPs.
Document all supported IPs in comment description.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/all/20240503060553.8520-3-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
With the new ISO 15765-2:2024 release the former documentation and comments
have to be reworked. This patch removes the ISO specification version/date
where possible.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Francesco Valla <valla.francesco@gmail.com>
Link: https://lore.kernel.org/all/20240420194746.4885-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Xilinx CAN binding documentation supports CAN and CANFD controllers.
Modify the title to indicate that both controllers are supported.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/all/20240503060553.8520-2-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit cfcb4465e9 ("can: slcan: remove legacy infrastructure")
removed the 10-device limit. Update the Kconfig help text accordingly.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240427152648.25434-1-mans@mansr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This driver is including the legacy GPIO header <linux/gpio.h>
but the only thing it is using from that header is the wrong
define for GPIOF_DIR_OUT.
Fix it up by using GPIO_LINE_DIRECTION_* macros respectively.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240412173332.186685-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
MT8195 and MT8188 share a similar MDP3 macro-block, with minor
differences - as in, the latter supports a subset of the number
of components supported by the former, but are otherwise handled
in the same way.
Add driver data for MT8188, reusing the already present MT8195
data where possible.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a compatible for MediaTek MT8188 RDMA, which supports only a
subset of the MDP3 components of its similar MT8195 counterpart.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-----BEGIN PGP SIGNATURE-----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=hdot
-----END PGP SIGNATURE-----
Merge tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 fixes the suspicious RCU usage warning that resulted from the
recent fix for the race between namespace cleanup and gc in
ipset left out checking the pernet exit phase when calling
rcu_dereference_protected(), from Jozsef Kadlecsik.
Patch #2 fixes incorrect input and output netdevice in SRv6 prerouting
hooks, from Jianguo Wu.
Patch #3 moves nf_hooks_lwtunnel sysctl toggle to the netfilter core.
The connection tracking system is loaded on-demand, this
ensures availability of this knob regardless.
Patch #4-#5 adds selftests for SRv6 netfilter hooks also from Jianguo Wu.
netfilter pull request 24-06-19
* tag 'nf-24-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: add selftest for the SRv6 End.DX6 behavior with netfilter
selftests: add selftest for the SRv6 End.DX4 behavior with netfilter
netfilter: move the sysctl nf_hooks_lwtunnel into the netfilter core
seg6: fix parameter passing when calling NF_HOOK() in End.DX4 and End.DX6 behaviors
netfilter: ipset: Fix suspicious rcu_dereference_protected()
====================
Link: https://lore.kernel.org/r/20240619170537.2846-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Even though ARAT interrupts are enabled by default, we still want
to keep the code that enables them. But instead doing that in the
CTB enabling step, move this code to the upload step, where we
already setup few other registers related to GuC.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619163413.817-1-michal.wajdeczko@intel.com
Merge the mmc fixes for v6.10-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.11.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The dwcmshc used on Rockchip rk3568 and rk3588 can use cqe, so set
the needed irq handler.
Tested on a rk3588-tiger SoM with dd, hdparm and fio. fio performance
does increase slightly from
Run status group 0 (all jobs):
READ: bw=209MiB/s (219MB/s), 209MiB/s-209MiB/s (219MB/s-219MB/s), io=4096MiB (4295MB), run=19607-19607msec
without CQE to
Run status group 0 (all jobs):
READ: bw=215MiB/s (225MB/s), 215MiB/s-215MiB/s (225MB/s-225MB/s), io=4096MiB (4295MB), run=19062-19062msec
with CQE enabled.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240530215547.2192457-1-heiko@sntech.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Broadcom BCM2712 SoC has an SDHCI card controller using the SDIO CFG
register block present on other STB chips. Add support for BCM2712
SD capabilities of this chipset.
The silicon is SD Express capable but this driver port does not currently
include that feature yet.
Based on downstream driver by raspberry foundation maintained kernel.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/ad2ec39c62c2783dd5de4bf2ec581866e822e2b1.1717061147.git.andrea.porta@suse.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The BCM2712 has an SDHCI capable host interface similar to the one found
in other STB chipsets. Add the relevant compatible string.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/f6e0d1fbc6c5e620897b5c65c95147ceaeed1485.1717061147.git.andrea.porta@suse.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The BCM2712 SoC is found on Raspberry Pi 5. Add compatible string to
acknowledge its new chipset.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/cfc4db17981ef946a71d40d522118a560aa0f15b.1717061147.git.andrea.porta@suse.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit 3ee0e7c3e6.
The patch is not working for unknown reasons and I would
need access to the hardware to fix the bug.
This shouldn't matter anyway: the Moxa Art is not expected
to use highmem, and sg_miter() is only necessary to have
to properly deal with highmem.
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 3ee0e7c3e6 ("mmc: moxart-mmc: Use sg_miter for PIO")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240606-mmc-moxart-revert-v1-1-a01c2f40de9c@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When erase/trim/discard completion was converted to mmc_poll_for_busy(),
optional support to poll with the host_ops->card_busy() callback was also
added.
The common sdhci's ->card_busy() turns out not to be working as expected
for the sdhci-brcmstb variant, as it keeps returning busy beyond the card's
busy period. In particular, this leads to the below splat for
mmc_do_erase() when running a discard (BLKSECDISCARD) operation during
mkfs.f2fs:
Info: [/dev/mmcblk1p9] Discarding device
[ 39.597258] sysrq: Show Blocked State
[ 39.601183] task:mkfs.f2fs state:D stack:0 pid:1561 tgid:1561 ppid:1542 flags:0x0000000d
[ 39.610609] Call trace:
[ 39.613098] __switch_to+0xd8/0xf4
[ 39.616582] __schedule+0x440/0x4f4
[ 39.620137] schedule+0x2c/0x48
[ 39.623341] schedule_hrtimeout_range_clock+0xe0/0x114
[ 39.628562] schedule_hrtimeout_range+0x10/0x18
[ 39.633169] usleep_range_state+0x5c/0x90
[ 39.637253] __mmc_poll_for_busy+0xec/0x128
[ 39.641514] mmc_poll_for_busy+0x48/0x70
[ 39.645511] mmc_do_erase+0x1ec/0x210
[ 39.649237] mmc_erase+0x1b4/0x1d4
[ 39.652701] mmc_blk_mq_issue_rq+0x35c/0x6ac
[ 39.657037] mmc_mq_queue_rq+0x18c/0x214
[ 39.661022] blk_mq_dispatch_rq_list+0x3a8/0x528
[ 39.665722] __blk_mq_sched_dispatch_requests+0x3a0/0x4ac
[ 39.671198] blk_mq_sched_dispatch_requests+0x28/0x5c
[ 39.676322] blk_mq_run_hw_queue+0x11c/0x12c
[ 39.680668] blk_mq_flush_plug_list+0x200/0x33c
[ 39.685278] blk_add_rq_to_plug+0x68/0xd8
[ 39.689365] blk_mq_submit_bio+0x3a4/0x458
[ 39.693539] __submit_bio+0x1c/0x80
[ 39.697096] submit_bio_noacct_nocheck+0x94/0x174
[ 39.701875] submit_bio_noacct+0x1b0/0x22c
[ 39.706042] submit_bio+0xac/0xe8
[ 39.709424] blk_next_bio+0x4c/0x5c
[ 39.712973] blkdev_issue_secure_erase+0x118/0x170
[ 39.717835] blkdev_common_ioctl+0x374/0x728
[ 39.722175] blkdev_ioctl+0x8c/0x2b0
[ 39.725816] vfs_ioctl+0x24/0x40
[ 39.729117] __arm64_sys_ioctl+0x5c/0x8c
[ 39.733114] invoke_syscall+0x68/0xec
[ 39.736839] el0_svc_common.constprop.0+0x70/0xd8
[ 39.741609] do_el0_svc+0x18/0x20
[ 39.744981] el0_svc+0x68/0x94
[ 39.748107] el0t_64_sync_handler+0x88/0x124
[ 39.752455] el0t_64_sync+0x168/0x16c
To fix the problem let's override the host_ops->card_busy() callback by
setting it to NULL, which forces the mmc core to poll with a CMD13 and
checking the R1_STATUS in the mmc_busy_cb() function.
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Fixes: 0d84c3e6a5 ("mmc: core: Convert to mmc_poll_for_busy() for erase/trim/discard")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240603220834.21989-2-kamal.dasu@broadcom.com
[Ulf: Clarified the commit message]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci_pci_o2_probe() uses pci_read_config_{byte,dword}() that return
PCIBIOS_* codes. The return code is then returned as is but as
sdhci_pci_o2_probe() is probe function chain, it should return normal
errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them. Add a label for read failure so that the
conversion can be done in one place rather than on all of the return
statements.
Fixes: 3d757ddbd6 ("mmc: sdhci-pci-o2micro: add Bayhub new chip GG8 support for UHS-I")
Fixes: d599005afd ("mmc: sdhci-pci-o2micro: Add missing checks in sdhci_pci_o2_probe")
Fixes: 706adf6bc3 ("mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support")
Fixes: 01acf6917a ("mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts")
Fixes: 26daa1ed40 ("mmc: sdhci: Disable ADMA on some O2Micro SD/MMC parts.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240527132443.14038-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
jmicron_pmos() and sdhci_pci_probe() use pci_{read,write}_config_byte()
that return PCIBIOS_* codes. The return code is then returned as is by
jmicron_probe() and sdhci_pci_probe(). Similarly, the return code is
also returned as is from jmicron_resume(). Both probe and resume
functions should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning them the fix these issues.
Fixes: 7582041ff3 ("mmc: sdhci-pci: fix simple_return.cocci warnings")
Fixes: 45211e2159 ("sdhci: toggle JMicron PMOS setting")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240527132443.14038-1-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Both Mali-T620 and Juno's HDLCD are now supported by upstream Mesa in
recent distros, so there's little reason not to enable the GPU by
default. At the very least it should offer a little extra CI coverage
for Panfrost probing and wiggling SCMI.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/07e45a015ff8934c4571617c8e8e90205e430eb6.1718811097.git.robin.murphy@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Each syscon node must come with a dedicated/specific compatible, which
is also reported by dtbs_check:
juno.dtb: apbregs@10000: compatible: ['syscon', 'simple-mfd'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240518203903.119608-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Add dedicated bindings for the FPGA syscon registers on ARM Juno board,
to fully document the block and also fix dtbs_check warning:
juno.dtb: apbregs@10000: compatible: ['syscon', 'simple-mfd'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240518203903.119608-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
With ARCH=arm64, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/bus/vexpress-config.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240613-md-arm64-drivers-bus-v1-1-e8162434e0ca@quicinc.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
-----BEGIN PGP SIGNATURE-----
iJgEABYKAEAWIQTAnvhxs4J7QT+XHKnMPy2AAyfeZAUCZnCazSIcbGF1cmVudC5w
aW5jaGFydEBpZGVhc29uYm9hcmQuY29tAAoJEMw/LYADJ95kFxIA/3j8nOqL+Z8g
DSUH3uOWoVybCVQHJVfA3VKdsFlO9dv7APoCjWldnbb2eL/JaFjes1cNZAiEYjFh
tySxUHYNLSrlAw==
=a6zw
-----END PGP SIGNATURE-----
Merge tag 'tags/media-next-uvc-20240617-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git into media_stage
uvcvideo fixes and improvements:
- add/fix quirks
- improve timestamp handling
- improve Power Line Frequency handling
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
All the handling for the properties was present, but they
were never attached to the connector to allow userspace
to change them.
Add them to the connector.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619153913.2804051-4-dave.stevenson@raspberrypi.com
The VEC supports not producing colour bursts for monochrome output.
It also has an option for disabling the chroma input to remove
chroma from the signal.
Now that there is a DRM_MODE_TV_MODE_MONOCHROME defined, plumb
this in.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619153913.2804051-3-dave.stevenson@raspberrypi.com
PREEMPT_RT has a different locking implementation for ww_mutex. The
base mutex of struct ww_mutex is declared as struct WW_MUTEX_BASE. The
latter is defined as `mutex' for non-PREEMPT_RT builds and `rt_mutex'
for PREEMPT_RT builds.
Using mutex_lock() directly on the base mutex in
ttm_bo_reserve_deadlock() leads to compile error on PREEMPT_RT.
The locking-selftest has its own defines to deal with this and it is
probably best to defines the needed one within the test program since
their usefulness is limited outside of well known selftests.
Provide ww_mutex_base_lock() which points to the correct function for
PREEMPT_RT and non-PREEMPT_RT builds.
Fixes: 995279d280 ("drm/ttm/tests: Add tests for ttm_bo functions")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240619144630.4DliKOmr@linutronix.de
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/rc/rc-core.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With ARCH=sparc, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/openpromfs/openpromfs.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240619-md-sparc-fs-openpromfs-v1-1-51c85ce90fa3@quicinc.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
MHI endpoint stack accidentally started allocating memory for objects from
DMA zone since commit 62210a26cd ("bus: mhi: ep: Use slab allocator
where applicable"). But there is no real need to allocate memory from this
naturally limited DMA zone. This also causes the MHI endpoint stack to run
out of memory while doing high bandwidth transfers.
So let's switch over to normal memory.
Cc: <stable@vger.kernel.org> # 6.8
Fixes: 62210a26cd ("bus: mhi: ep: Use slab allocator where applicable")
Reviewed-by: Mayank Rana <quic_mrana@quicinc.com>
Link: https://lore.kernel.org/r/20240603164354.79035-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The USB phy requires various power supplies to work.
While we don't have a PMIC driver yet, the supplies should still be
added to the DT.
Add some placeholders, which will be replaced with the real ones once
we implement PMIC.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240618-gs101-usb-regulators-in-dt-v3-1-6a749207052e@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
On platforms where VFs are using memory based interrupts, we
missed invalid access to no longer existing interrupt registers,
as we keep them marked with XE_REG_OPTION_VF. To fix that just
either setup memirq vectors in GuC or enable legacy interrupts.
Fixes: aef4eb7c7d ("drm/xe/vf: Setup memory based interrupts in GuC")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240617154736.685-1-michal.wajdeczko@intel.com
(cherry picked from commit f0ccd2d805)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Commit 05da7d9f71 ("drm/i915/gem: Downgrade stolen lmem setup
warning") adds a debug message where the "lmem_size" and
"dsm_base" variables are printed using the %lli identifier.
However, these variables are defined as resource_size_t, which
are unsigned long for 32-bit machines and unsigned long long for
64-bit machines.
The documentation (core-api/printk-formats.rst) recommends using
the %pa specifier for printing addresses and sizes of resources.
Replace %lli with %pa.
This patch also mutes the following sparse warning when compiling
with:
make W=1 ARCH=i386 drivers/gpu/drm/i915
>> drivers/gpu/drm/i915/gem/i915_gem_stolen.c:941:5: error: format '%lli'
expects argument of type 'long long int', but argument 5 has type
'resource_size_t' {aka 'unsigned int'} [-Werror=format=]
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240617184243.330231-3-andi.shyti@linux.intel.com
Commit 05da7d9f71 ("drm/i915/gem: Downgrade stolen lmem setup
warning") returns '0' from i915_gem_stolen_lmem_setup(), but it's
supposed to return a pointer to the intel_memory_region
structure.
Sparse complains with the following message:
>> drivers/gpu/drm/i915/gem/i915_gem_stolen.c:943:32: sparse: sparse:
Using plain integer as NULL pointer
Return NULL.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240617184243.330231-2-andi.shyti@linux.intel.com
Shannon Nelson says:
====================
ionic: rework fix for doorbell miss
A latency test in a scaled out setting (many VMs with many queues)
has uncovered an issue with our missed doorbell fix from
commit b69585bfce ("ionic: missed doorbell workaround")
As a refresher, the Elba ASIC has an issue where once in a blue
moon it might miss/drop a queue doorbell notification from
the driver. This can result in Tx timeouts and potential Rx
buffer misses.
The basic problem with the original solution is that
we're delaying things with a timer for every single queue,
periodically using mod_timer() to reset to reset the alarm, and
mod_timer() becomes a more and more expensive thing as there
are more and more VFs and queues each with their own timer.
A ping-pong latency test tends to exacerbate the effect such
that every napi is doing a mod_timer() in every cycle.
An alternative has been worked out to replace this using
periodic workqueue items outside the napi cycle to request a
napi_schedule driven by a single delayed-workqueue per device
rather than a timer for every queue. Also, now that newer
firmware is actually reporting its ASIC type, we can restrict
this to the appropriate chip.
The testing scenario used 128 VFs in UP state, 16 queues per
VF, and latency tests were done using TCP_RR with adaptive
interrupt coalescing enabled, running on 1 VF. We would see
99th percentile latencies of up to 900us range, with some max
fliers as much as 4ms.
With these fixes the 99th percentile latencies are typically well
under 50us with the occasional max under 500us.
v1:
https://lore.kernel.org/netdev/20240610230706.34883-1-shannon.nelson@amd.com/
====================
Link: https://lore.kernel.org/r/20240619003257.6138-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the doorbell workaround isn't required for a certain
asic_type then there is no need to run the associated
code. Since newer FW versions are finally reporting their
asic_type we can use a flag to determine whether or not to
do the workaround.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-9-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We only support (u16)-1 size for rx_copybreak, so we can reduce the
field size and move a couple other fields around to save a little
space in the ionic_lif struct.
Before:
/* size: 17440, cachelines: 273, members: 56 */
/* sum members: 17403, holes: 9, sum holes: 37 */
/* last cacheline: 32 bytes */
After:
/* size: 17424, cachelines: 273, members: 56 */
/* sum members: 17401, holes: 7, sum holes: 23 */
/* last cacheline: 16 bytes */
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-8-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check the deadline against the last time run and only
schedule a new napi if we haven't been run recently.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-7-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a work item for each queue that will be run on the queue's
preferred cpu and will schedule another napi. This napi is
run in case the device missed a doorbell and didn't process
a packet. This is a problem for the Elba asic that happens
very rarely.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-6-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the first queued work for checking on the missed doorbell.
This is a delayed work item that reschedules itself every cycle
starting at probe.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-5-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using the system's default workqueue, add a private
workqueue for the device to use for its little jobs. This is
to better support the new work items we will be adding in the
next patches for PF and VF specific jobs, without inundating
the system workqueue in a couple of customer cases where our
devices get scaled out to 100-200 VFs.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-4-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver either sets the initial interrupt affinity for its
adminq and tx/rx queues on probe or resets it on various
down/up/reconfigure flows. If any user and/or user process
(i.e. irqbalance) changes IRQ affinity for any of the driver's interrupts
that will be reset to driver defaults whenever any down/up/reconfigure
operation happens. This is incorrect and is fixed by making 2 changes:
1. Allocate an array of cpumasks that's only allocated on probe and
destroyed on remove.
2. Update the cpumask(s) for interrupts that are in use by registering
for affinity notifiers.
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the timer-per-queue mechanics from the missed doorbell
check in preparation for the new missed doorbell fix.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240619003257.6138-2-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Use page pool for Rx buffers allocation
Amit Cohen writes:
After using NAPI to process events from hardware, the next step is to
use page pool for Rx buffers allocation, which is also enhances
performance.
To simplify this change, first use page pool to allocate one continuous
buffer for each packet, later memory consumption can be improved by using
fragmented buffers.
This set significantly enhances mlxsw driver performance, CPU can handle
about 370% of the packets per second it previously handled.
The next planned improvement is using XDP to optimize telemetry.
Patch set overview:
Patches #1-#2 are small preparations for page pool usage
Patch #3 initializes page pool, but do not use it
Patch #4 converts the driver to use page pool for buffers allocations
Patch #5 is an optimization for buffer access
Patch #6 cleans up an unused structure
Patch #7 uses napi_consume_skb() as part of Tx completion
====================
Link: https://lore.kernel.org/r/cover.1718709196.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
