Rename MIPS's trampoline hooks for virtualization enabling to match the
recently renamed arch hooks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the per-CPU hooks used to enable virtualization in hardware to
align with the KVM-wide helpers in kvm_main.c, and to better capture that
the callbacks are invoked on every online CPU.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Message-ID: <20240830043600.127750-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename the various functions (and a variable) that enable virtualization
to prepare for upcoming changes, and to clean up artifacts of KVM's
previous behavior, which required manually juggling locks around
kvm_usage_count.
Drop the "nolock" qualifier from per-CPU functions now that there are no
"nolock" implementations of the "all" variants, i.e. now that calling a
non-nolock function from a nolock function isn't confusing (unlike this
sentence).
Drop "all" from the outer helpers as they no longer manually iterate
over all CPUs, and because it might not be obvious what "all" refers to.
In lieu of the above qualifiers, append "_cpu" to the end of the functions
that are per-CPU helpers for the outer APIs.
Opportunistically prepend "kvm" to all functions to help make it clear
that they are KVM helpers, but mostly because there's no reason not to.
Lastly, use "virtualization" instead of "hardware", because while the
functions do enable virtualization in hardware, there are a _lot_ of
things that KVM enables in hardware.
Defer renaming the arch hooks to future patches, purely to reduce the
amount of churn in a single commit.
Reviewed-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Register KVM's cpuhp and syscore callback when enabling virtualization
in hardware instead of registering the callbacks during initialization,
and let the CPU up/down framework invoke the inner enable/disable
functions. Registering the callbacks during initialization makes things
more complex than they need to be, as KVM needs to be very careful about
handling races between enabling CPUs being onlined/offlined and hardware
being enabled/disabled.
Intel TDX support will require KVM to enable virtualization during KVM
initialization, i.e. will add another wrinkle to things, at which point
sorting out the potential races with kvm_usage_count would become even
more complex.
Note, using the cpuhp framework has a subtle behavioral change: enabling
will be done serially across all CPUs, whereas KVM currently sends an IPI
to all CPUs in parallel. While serializing virtualization enabling could
create undesirable latency, the issue is limited to the 0=>1 transition of
VM creation. And even that can be mitigated, e.g. by letting userspace
force virtualization to be enabled when KVM is initialized.
Cc: Chao Gao <chao.gao@intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock
on x86 due to a chain of locks and SRCU synchronizations. Translating the
below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on
CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the
fairness of r/w semaphores).
CPU0 CPU1 CPU2
1 lock(&kvm->slots_lock);
2 lock(&vcpu->mutex);
3 lock(&kvm->srcu);
4 lock(cpu_hotplug_lock);
5 lock(kvm_lock);
6 lock(&kvm->slots_lock);
7 lock(cpu_hotplug_lock);
8 sync(&kvm->srcu);
Note, there are likely more potential deadlocks in KVM x86, e.g. the same
pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with
__kvmclock_cpufreq_notifier():
cpuhp_cpufreq_online()
|
-> cpufreq_online()
|
-> cpufreq_gov_performance_limits()
|
-> __cpufreq_driver_target()
|
-> __target_index()
|
-> cpufreq_freq_transition_begin()
|
-> cpufreq_notify_transition()
|
-> ... __kvmclock_cpufreq_notifier()
But, actually triggering such deadlocks is beyond rare due to the
combination of dependencies and timings involved. E.g. the cpufreq
notifier is only used on older CPUs without a constant TSC, mucking with
the NX hugepage mitigation while VMs are running is very uncommon, and
doing so while also onlining/offlining a CPU (necessary to generate
contention on cpu_hotplug_lock) would be even more unusual.
The most robust solution to the general cpu_hotplug_lock issue is likely
to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq
notifier doesn't to take kvm_lock. For now, settle for fixing the most
blatant deadlock, as switching to an RCU-protected list is a much more
involved change, but add a comment in locking.rst to call out that care
needs to be taken when walking holding kvm_lock and walking vm_list.
======================================================
WARNING: possible circular locking dependency detected
6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O
------------------------------------------------------
tee/35048 is trying to acquire lock:
ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm]
but task is already holding lock:
ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (kvm_lock){+.+.}-{3:3}:
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
kvm_dev_ioctl+0x4fb/0xe50 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #2 (cpu_hotplug_lock){++++}-{0:0}:
cpus_read_lock+0x2e/0xb0
static_key_slow_inc+0x16/0x30
kvm_lapic_set_base+0x6a/0x1c0 [kvm]
kvm_set_apic_base+0x8f/0xe0 [kvm]
kvm_set_msr_common+0x9ae/0xf80 [kvm]
vmx_set_msr+0xa54/0xbe0 [kvm_intel]
__kvm_set_msr+0xb6/0x1a0 [kvm]
kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm]
kvm_vcpu_ioctl+0x485/0x5b0 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&kvm->srcu){.+.+}-{0:0}:
__synchronize_srcu+0x44/0x1a0
synchronize_srcu_expedited+0x21/0x30
kvm_swap_active_memslots+0x110/0x1c0 [kvm]
kvm_set_memslot+0x360/0x620 [kvm]
__kvm_set_memory_region+0x27b/0x300 [kvm]
kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm]
kvm_vm_ioctl+0x295/0x650 [kvm]
__se_sys_ioctl+0x7b/0xd0
__x64_sys_ioctl+0x21/0x30
x64_sys_call+0x15d0/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&kvm->slots_lock){+.+.}-{3:3}:
__lock_acquire+0x15ef/0x2e30
lock_acquire+0xe0/0x260
__mutex_lock+0x6a/0xb40
mutex_lock_nested+0x1f/0x30
set_nx_huge_pages+0x179/0x1e0 [kvm]
param_attr_store+0x93/0x100
module_attr_store+0x22/0x40
sysfs_kf_write+0x81/0xb0
kernfs_fop_write_iter+0x133/0x1d0
vfs_write+0x28d/0x380
ksys_write+0x70/0xe0
__x64_sys_write+0x1f/0x30
x64_sys_call+0x281b/0x2e60
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: Chao Gao <chao.gao@intel.com>
Fixes: 0bf50497f0 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock")
Cc: stable@vger.kernel.org
Reviewed-by: Kai Huang <kai.huang@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240830043600.127750-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fsl,pcie-scfg requires an argument when there are more than one PCIe
instances.
Thus, change it to the phandle-array type and use items to describe
what each field means.
This also fixes the following warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: pcie@3400000: fsl,pcie-scfg:0: [22, 0] is too long from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Link: https://lore.kernel.org/linux-pci/20240701221612.2112668-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Now we have everything in place and we can allow idmapped mounts
by setting the FS_ALLOW_IDMAP flag. Notice that real availability
of idmapped mounts will depend on the fuse daemon. Fuse daemon
have to set FUSE_ALLOW_IDMAP flag in the FUSE_INIT reply.
To discuss:
- we enable idmapped mounts support only if "default_permissions" mode is
enabled, because otherwise we would need to deal with UID/GID mappings in
the userspace side OR provide the userspace with idmapped
req->in.h.uid/req->in.h.gid values which is not something that we probably
want to. Idmapped mounts philosophy is not about faking caller uid/gid.
Some extra links and examples:
- libfuse support
https://github.com/mihalicyn/libfuse/commits/idmap_support
- fuse-overlayfs support:
https://github.com/mihalicyn/fuse-overlayfs/commits/idmap_support
- cephfs-fuse conversion example
https://github.com/mihalicyn/ceph/commits/fuse_idmap
- glusterfs conversion example
https://github.com/mihalicyn/glusterfs/commits/fuse_idmap
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It is not possible with the current fuse code, but let's protect ourselves
from regressions in the future.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is needed to properly clear suid/sgid.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
RENAME_WHITEOUT is a special case of ->rename
and we need to take idmappings into account there.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
It's just a matter of adjusting a permission check condition
for S_ISGID flag. All the rest is already handled in the generic
VFS code.
Notice that this permission check is the analog of what
we have in posix_acl_update_mode() generic helper, but
fuse doesn't use this helper as on the kernel side we don't
care about ensuring that POSIX ACL and CHMOD permissions are in sync
as it is a responsibility of a userspace daemon to handle that.
For the same reason we don't have a calls to posix_acl_chmod(),
while most of other filesystem do.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We don't need to have idmap in the __fuse_get_acl as we don't
have any use for it.
In the current POSIX ACL implementation, idmapped mounts are
taken into account on the userspace/kernel border
(see vfs_set_acl_idmapped_mnt() and vfs_posix_acl_to_xattr()).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Need to translate uid and gid in case of chown(2).
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We only cover the case when "default_permissions" flag
is used. A reason for that is that otherwise all the permission
checks are done in the userspace and we have to deal with
VFS idmapping in the userspace (which is bad), alternatively
we have to provide the userspace with idmapped req->in.h.uid/req->in.h.gid
which is also not align with VFS idmaps philosophy.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We have to:
- pass an idmapping to the generic_fillattr()
to properly handle UIG/GID mapping for the userspace.
- pass -/- to fuse_fillattr() (analog of generic_fillattr() in fuse).
Difference between these two is that generic_fillattr() takes all the
stat() data from the inode directly, while fuse_fillattr() codepath takes a
fresh data just from the userspace reply on the FUSE_GETATTR request.
In some cases we can just pass &nop_mnt_idmap, because idmapping won't be
used in these codepaths. For example, when 3rd argument of
fuse_do_getattr() is NULL then idmap argument is not used.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We have all the infrastructure in place, we just need
to pass an idmapping here.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We don't need to remap parent_gid, but have to adjust
group membership checks and take idmapping into account.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.
No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add some preparational changes in fuse_get_req/fuse_force_creds
to handle idmappings.
Miklos suggested [1], [2] to change the meaning of in.h.uid/in.h.gid
fields when daemon declares support for idmapped mounts. In a new semantic,
we fill uid/gid values in fuse header with a id-mapped caller uid/gid (for
requests which create new inodes), for all the rest cases we just send -1
to userspace.
No functional changes intended.
Link: https://lore.kernel.org/all/CAJfpegsVY97_5mHSc06mSw79FehFWtoXT=hhTUK_E-Yhr7OAuQ@mail.gmail.com/ [1]
Link: https://lore.kernel.org/all/CAJfpegtHQsEUuFq1k4ZbTD3E1h-GsrN3PWyv7X8cg6sfU_W2Yw@mail.gmail.com/ [2]
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Right now we determine if filesystem support vfs idmappings or not basing
on the FS_ALLOW_IDMAP flag presence. This "static" way works perfecly well
for local filesystems like ext4, xfs, btrfs, etc. But for network-like
filesystems like fuse, cephfs this approach is not ideal, because sometimes
proper support of vfs idmaps requires some extensions for the on-wire
protocol, which implies that changes have to be made not only in the Linux
kernel code but also in the 3rd party components like libfuse, cephfs MDS
server and so on.
We have seen that issue during our work on cephfs idmapped mounts [1] with
Christian, but right now I'm working on the idmapped mounts support for
fuse/virtiofs and I think that it is a right time for this extension.
[1] 5ccd8530dd ("ceph: handle idmapped mounts in create_request_message()")
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Copy the 'num-viewport' property from snps,dw-pcie-common.yaml to
fsl,layerscape-pcie.yaml to address the following warning:
/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dtb: pcie@3400000: Unevaluated properties are not allowed ('num-viewport' was unexpected)
This is necessary due to historical reasons where fsl,layerscape-pcie.yaml
does not directly reference snps,dw-pcie-common.yaml.
Link: https://lore.kernel.org/linux-pci/20240823185855.776904-1-Frank.Li@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
As of today, KVM notes a quiescent state only in guest entry, which is good
as it avoids the guest being interrupted for current RCU operations.
While the guest vcpu runs, it can be interrupted by a timer IRQ that will
check for any RCU operations waiting for this CPU. In case there are any of
such, it invokes rcu_core() in order to sched-out the current thread and
note a quiescent state.
This occasional schedule work will introduce tens of microsseconds of
latency, which is really bad for vcpus running latency-sensitive
applications, such as real-time workloads.
So, note a quiescent state in guest exit, so the interrupted guests is able
to deal with any pending RCU operations before being required to invoke
rcu_core(), and thus avoid the overhead of related scheduler work.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240511020557.1198200-1-leobras@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add thermal trips for the two GPU thermal sensors found in the Allwinner A64.
There's only one GPU OPP defined since the commit 1428f0c19f ("arm64: dts:
allwinner: a64: Run GPU at 432 MHz"), so defining only the critical thermal
trips makes sense for the A64's two GPU thermal zones.
Having these critical thermal trips defined ensures that no hot spots develop
inside the SoC die that exceed the maximum junction temperature. That might
have been possible before, although quite unlikely, because the CPU and GPU
portions of the SoC are packed closely inside the SoC, so the overheating GPU
would inevitably result in the heat soaking into the CPU portion of the SoC,
causing the CPU thermal sensor to return high readings and trigger the CPU
critical thermal trips. However, it's better not to rely on the heat soak
and have the critical GPU thermal trips properly defined instead.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Norayr Chilingarian <norayr@arnet.am>
Link: https://lore.kernel.org/r/0a6110a7b27a050bd58ab3663087eecd8e873ac0.1724126053.git.dsimic@manjaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The fsl,lx2160a-pcie compatible is used for mobivel according to the
Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt file.
Whereas the fsl,layerscape-pcie is used for DesignWare PCIe controller binding.
So change it to fsl,lx2160ar2-pcie and allow a fall back to fsl,ls2088a-pcie.
While at it, sort compatible string.
Fixes: 24cd7ecb38 ("dt-bindings: PCI: layerscape-pci: Convert to YAML format")
Link: https://lore.kernel.org/linux-pci/20240826-2160r2-v1-1-106340d538d6@nxp.com
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:".
Add missing top-level constraints for clock-names and reset-names.
Link: https://lore.kernel.org/linux-pci/20240818172843.121787-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:".
Add missing top-level constraints for clocks and clock-names.
Link: https://lore.kernel.org/linux-pci/20240818172843.121787-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:".
Add missing top-level constraints for clock-names and reset-names.
Link: https://lore.kernel.org/linux-pci/20240818172843.121787-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Add suspend and resume support. Only the Root Complex mode is supported.
During the suspend stage PERST# is asserted, then deasserted during the
resume stage.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-7-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
[kwilczynski: commit log, update references to the PCI SIG specification]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
The "Power Sequencing and Reset Signal Timings" table of the PCI
Express Card Electromechanical Specification, Revision 5.1, Section
2.9.2, indicates PERST# should be deasserted after minimum of 100us
once REFCLK is stable (symbol T_PERST-CLK).
Add a macro so that PCIe controller drivers can use it.
Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-5-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
[kwilczynski: commit log, update sleep interval macros code comments]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Since arm_iommu_create_mapping() now accepts the device, let's replace
iommu_domain_alloc() with iommu_paging_domain_alloc() to retire the former.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
All users of ARM IOMMU mappings create them for a particular device, so
change the interface to accept the device rather than forcing a vague
indirection through a bus type. This prepares for making a similar
change to iommu_domain_alloc() itself.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Since commit d492cc2573 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the amba_bustype variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Add a "has_phy" field indicating that the internal PHY has SW control
that requires configuration. Some previous chips only required the
firing of the "rescal" reset controller.
This change requires us to give the 7216 SoC its own cfg_data structure.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-10-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Remove two constants in the driver which are no longer
used: RGR1_SW_INIT_1_INIT_MASK and RGR1_SW_INIT_1_INIT_SHIFT.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-9-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Do preparatory work for the 7712 SoC, which is introduced in a
future commit.
Our HW design has changed two register offsets for the 7712, where
previously it was a common value for all Broadcom SoCs with PCIe
cores.
Specifically, the two offsets are to the registers HARD_DEBUG and
INTR2_CPU_BASE.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-8-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
The 7712 SoC adds a software init reset device for the PCIe HW.
If found in the DT node, use it.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-7-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The 7712 SoC has a bridge reset which can be described in the device
tree.
Use it if present. Otherwise, continue to use the legacy method to
reset the bridge.
Link: https://lore.kernel.org/linux-pci/20240815225731.40276-6-james.quinlan@broadcom.com
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[kwilczynski: commit log, refactored function brcm_pcie_bridge_sw_init_set_generic()]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stanimir Varbanov <svarbanov@suse.de>
Legacy console printing from printk() caller context may invoke
the console driver from atomic context. This leads to a lockdep
splat because the console driver will acquire a sleeping lock
and the caller may already hold a spinning lock. This is noticed
by lockdep on !PREEMPT_RT configurations because it will lead to
a problem on PREEMPT_RT.
However, on PREEMPT_RT the printing path from atomic context is
always avoided and the console driver is always invoked from a
dedicated thread. Thus the lockdep splat on !PREEMPT_RT is a
false positive.
For !PREEMPT_RT override the lock-context before invoking the
console driver to avoid the false positive.
Do not override the lock-context for PREEMPT_RT in order to
allow lockdep to catch any real locking context issues related
to the write callback usage.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-18-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
It is important that console printing threads are scheduled
shortly after a printk call and with generous runtime budgets.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-17-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The write() callback of legacy consoles usually makes use of
spinlocks. This is not permitted with PREEMPT_RT in atomic
contexts.
For PREEMPT_RT, create a new kthread to handle printing of all
the legacy consoles (and nbcon consoles if boot consoles are
registered). This allows legacy consoles to work on PREEMPT_RT
without requiring modification. (However they will not have
the reliability properties guaranteed by nbcon atomic
consoles.)
Use the existing printk_kthreads_check_locked() to start/stop
the legacy kthread as needed.
Introduce the macro force_legacy_kthread() to query if the
forced threading of legacy consoles is in effect. Although
currently only enabled for PREEMPT_RT, this acts as a simple
mechanism for the future to allow other preemption models to
easily take advantage of the non-interference property provided
by the legacy kthread.
When force_legacy_kthread() is true, the legacy kthread
fulfills the role of the console_flush_type @legacy_offload by
waking the legacy kthread instead of printing via the
console_lock in the irq_work. If the legacy kthread is not
yet available, no legacy printing takes place (unless in
panic).
If for some reason the legacy kthread fails to create, any
legacy consoles are unregistered. With force_legacy_kthread(),
the legacy kthread is a critical component for legacy consoles.
These changes only affect CONFIG_PREEMPT_RT.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-16-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update /proc/consoles output to show 'W' if an nbcon console is
registered. Since the write_thread() callback is mandatory, it
enough just to check if it is an nbcon console.
Also update /proc/consoles output to show 'N' if it is an
nbcon console.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-14-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
An emergency or panic context can takeover console ownership
while the current owner was printing a printk message. The
atomic printer will re-print the message that the previous
owner was printing. However, this can look confusing to the
user and may even seem as though a message was lost.
[3430014.1
[3430014.181123] usb 1-2: Product: USB Audio
Add a new field @nbcon_prev_seq to struct console to track
the sequence number to print that was assigned to the previous
console owner. If this matches the sequence number to print
that the current owner is assigned, then a takeover must have
occurred. In this case, print an additional message to inform
the user that the previous message is being printed again.
[3430014.1
** replaying previous printk message **
[3430014.181123] usb 1-2: Product: USB Audio
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
In order to support prepending different texts to printk
messages, split out the prepending code into a helper
function.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-11-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Once the kthread is running and available
(i.e. @printk_kthreads_running is set), the kthread becomes
responsible for flushing any pending messages which are added
in NBCON_PRIO_NORMAL context. Namely the legacy
console_flush_all() and device_release() no longer flush the
console. And nbcon_atomic_flush_pending() used by
nbcon_cpu_emergency_exit() no longer flushes messages added
after the emergency messages.
The console context is safe when used by the kthread only when
one of the following conditions are true:
1. Other caller acquires the console context with
NBCON_PRIO_NORMAL with preemption disabled. It will
release the context before rescheduling.
2. Other caller acquires the console context with
NBCON_PRIO_NORMAL under the device_lock.
3. The kthread is the only context which acquires the console
with NBCON_PRIO_NORMAL.
This is satisfied for all atomic printing call sites:
nbcon_legacy_emit_next_record() (#1)
nbcon_atomic_flush_pending_con() (#1)
nbcon_device_release() (#2)
It is even double guaranteed when @printk_kthreads_running
is set because then _only_ the kthread will print for
NBCON_PRIO_NORMAL. (#3)
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
