When printing via console_lock, the write_atomic() callback is
used for nbcon consoles. However, if it is known that the
current context is a task context, the write_thread() callback
can be used instead.
Using write_thread() instead of write_atomic() helps to reduce
large disabled preemption regions when the device_lock does not
disable preemption.
This is mainly a preparatory change to allow avoiding
write_atomic() completely during normal operation if boot
consoles are registered.
As a side-effect, it also allows consolidating the printing
code for legacy printing and the kthread printer.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Move nbcon_atomic_emit_one() so that it can be used by
nbcon_kthread_func() in a follow-up commit.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-8-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Provide the main implementation for running a printer kthread
per nbcon console that is takeover/handover aware. This
includes:
- new mandatory write_thread() callback
- kthread creation
- kthread main printing loop
- kthread wakeup mechanism
- kthread shutdown
kthread creation is a bit tricky because consoles may register
before kthreads can be created. In such cases, registration
will succeed, even though no kthread exists. Once kthreads can
be created, an early_initcall will set @printk_kthreads_ready.
If there are no registered boot consoles, the early_initcall
creates the kthreads for all registered nbcon consoles. If
kthread creation fails, the related console is unregistered.
If there are registered boot consoles when
@printk_kthreads_ready is set, no kthreads are created until
the final boot console unregisters.
Once kthread creation finally occurs, @printk_kthreads_running
is set so that the system knows kthreads are available for all
registered nbcon consoles.
If @printk_kthreads_running is already set when the console
is registering, the kthread is created during registration. If
kthread creation fails, the registration will fail.
Until @printk_kthreads_running is set, console printing occurs
directly via the console_lock.
kthread shutdown on system shutdown/reboot is necessary to
ensure the printer kthreads finish their printing so that the
system can cleanly transition back to direct printing via the
console_lock in order to reliably push out the final
shutdown/reboot messages. @printk_kthreads_running is cleared
before shutting down the individual kthreads.
The kthread uses a new mandatory write_thread() callback that
is called with both device_lock() and the console context
acquired.
The console ownership handling is necessary for synchronization
against write_atomic() which is synchronized only via the
console context ownership.
The device_lock() serializes acquiring the console context with
NBCON_PRIO_NORMAL. It is needed in case the device_lock() does
not disable preemption. It prevents the following race:
CPU0 CPU1
[ task A ]
nbcon_context_try_acquire()
# success with NORMAL prio
# .unsafe == false; // safe for takeover
[ schedule: task A -> B ]
WARN_ON()
nbcon_atomic_flush_pending()
nbcon_context_try_acquire()
# success with EMERGENCY prio
# flushing
nbcon_context_release()
# HERE: con->nbcon_state is free
# to take by anyone !!!
nbcon_context_try_acquire()
# success with NORMAL prio [ task B ]
[ schedule: task B -> A ]
nbcon_enter_unsafe()
nbcon_context_can_proceed()
BUG: nbcon_context_can_proceed() returns "true" because
the console is owned by a context on CPU0 with
NBCON_PRIO_NORMAL.
But it should return "false". The console is owned
by a context from task B and we do the check
in a context from task A.
Note that with these changes, the printer kthreads do not yet
take over full responsibility for nbcon printing during normal
operation. These changes only focus on the lifecycle of the
kthreads.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-7-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
When initializing an nbcon console, have nbcon_alloc() set
@nbcon_seq to the highest possible sequence number. For all
practical purposes, this will guarantee that the console
will have nothing to print until later when @nbcon_seq is
set to the proper initial printing value.
This will be particularly important once kthread printing is
introduced because nbcon_alloc() can create/start the kthread
before the desired initial sequence number is known.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-6-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The nbcon consoles will have two callbacks to be used for
different contexts. In order to determine if an nbcon console
is usable, console_is_usable() must know if it is a context
that will need to use the optional write_atomic() callback.
Also, nbcon_emit_next_record() must know which callback it
needs to call.
Add an extra parameter @use_atomic to console_is_usable() and
nbcon_emit_next_record() to specify this.
Since so far only the write_atomic() callback exists,
@use_atomic is set to true for all call sites.
For legacy consoles, @use_atomic is not used.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Ensure consoles have flushed pending records before
unregistering. The console should print up to at least its
related "console disabled" record.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-4-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Since ownership can be lost at any time due to handover or
takeover, a printing context _must_ be prepared to back out
immediately and carefully. However, there are scenarios where
the printing context must reacquire ownership in order to
finalize or revert hardware changes.
One such example is when interrupts are disabled during
printing. No other context will automagically re-enable the
interrupts. For this case, the disabling context _must_
reacquire nbcon ownership so that it can re-enable the
interrupts.
Provide nbcon_reacquire_nobuf() for exactly this purpose. It
allows a printing context to reacquire ownership using the same
priority as its previous ownership.
Note that after a successful reacquire the printing context
will have no output buffer because that has been lost. This
function cannot be used to resume printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
There is a build issue with LD segmentation fault, while
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled, as bellow.
scripts/link-vmlinux.sh: line 49: 3796 Segmentation fault
(core dumped) ${ld} ${ldflags} -o ${output} ${wl}--whole-archive
${objs} ${wl}--no-whole-archive ${wl}--start-group
${libs} ${wl}--end-group ${kallsymso} ${btf_vmlinux_bin_o} ${ldlibs}
The error occurs in older versions of the GNU ld with version earlier
than 2.36. It makes most sense to have a minimum LD version as
a dependency for HAVE_LD_DEAD_CODE_DATA_ELIMINATION and eliminate
the impact of ".reloc .text, R_ARM_NONE, ." when
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not enabled.
Fixes: ed0f941022 ("ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATION")
Reported-by: Harith George <mail2hgg@gmail.com>
Tested-by: Harith George <mail2hgg@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://lore.kernel.org/all/14e9aefb-88d1-4eee-8288-ef15d4a9b059@gmail.com/
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
When restricting jevents generated json lookup code with JEVENTS_MODEL
a list of models must be provided. Some builds don't know model names
but know cpuids. Add a command that can convert a cpuid to a model
using mapfile.csv files. This can be used with JEVENTS_MODEL like:
$ make JEVENTS_MODEL=`./pmu-events/models.py x86 'GenuineIntel-6-8D-1,AuthenticAMD-26-1' pmu-events/arch/`
Committer testing:
$ tools/perf/pmu-events/models.py x86 'GenuineIntel-6-8D-1,AuthenticAMD-26-1' tools/perf/pmu-events/arch/
tigerlake,amdzen5
$ perf stat -v sleep 1 |& head -1
Using CPUID GenuineIntel-6-B7-1
$ tools/perf/pmu-events/models.py x86 'GenuineIntel-6-B7-1' tools/perf/pmu-events/arch/
alderlake
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240904044351.712080-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The explanatory comment used `set_task_state` instead of
`set_current_state` which is the function actually used in the code.
Signed-off-by: Alvaro Parker <alparkerdf@gmail.com>
Link: https://lore.kernel.org/r/20240903172214.520086-1-alparkerdf@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_integrity_add_page restricts the size of the integrity metadata to
queue_max_hw_sectors(q). This restriction is not needed because oversized
bios are split automatically. This restriction causes problems with
dm-integrity 'inline' mode - if we send a large bio to dm-integrity and
the bio's metadata are larger than queue_max_hw_sectors(q),
bio_integrity_add_page fails and the bio is ended with BLK_STS_RESOURCE
error.
An example that triggers it:
dd: error writing '/dev/mapper/in2': Cannot allocate memory
1+0 records in
0+0 records out
0 bytes copied, 0.00169291 s, 0.0 kB/s
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: fb0987682c ("dm-integrity: introduce the Inline mode")
Fixes: 0ece1d649b ("bio-integrity: create multi-page bvecs in bio_integrity_add_page()")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/e41b3b8e-16c2-70cb-97cb-881234bb200d@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When two UBLK_CMD_START_USER_RECOVERY commands are submitted, the
first one sets 'ubq->ubq_daemon' to NULL, and the second one triggers
WARN in ublk_queue_reinit() and subsequently a NULL pointer dereference
issue.
Fix it by adding the check in ublk_ctrl_start_recovery() and return
immediately in case of zero 'ub->nr_queues_ready'.
BUG: kernel NULL pointer dereference, address: 0000000000000028
RIP: 0010:ublk_ctrl_start_recovery.constprop.0+0x82/0x180
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x75/0x170
? exc_page_fault+0x64/0x140
? asm_exc_page_fault+0x22/0x30
? ublk_ctrl_start_recovery.constprop.0+0x82/0x180
ublk_ctrl_uring_cmd+0x4f7/0x6c0
? pick_next_task_idle+0x26/0x40
io_uring_cmd+0x9a/0x1b0
io_issue_sqe+0x193/0x3f0
io_wq_submit_work+0x9b/0x390
io_worker_handle_work+0x165/0x360
io_wq_worker+0xcb/0x2f0
? finish_task_switch.isra.0+0x203/0x290
? finish_task_switch.isra.0+0x203/0x290
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_io_wq_worker+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-and-tested-by: Changhui Zhong <czhong@redhat.com>
Closes: https://lore.kernel.org/all/CAGVVp+UvLiS+bhNXV-h2icwX1dyybbYHeQUuH7RYqUvMQf6N3w@mail.gmail.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20240904031348.4139545-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Until this patch was rpmb_dev_register() always freeing rdev in the error
path. However, past device_register() it must not do that since the memory
is now managed by the device even if it failed to register properly. So fix
this by doing a put_device() before returning the error code.
Fixes the smatch warning:
drivers/misc/rpmb-core.c:204 rpmb_dev_register()
warn: freeing device managed memory (leak): 'rdev'
Fixes: 1e9046e3a1 ("rpmb: add Replay Protected Memory Block (RPMB) subsystem")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240902105803.2885544-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use str_high_low() rather than open coding.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-5-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use GPIO_LOOKUP() macro which provides a compound literal
and can be used with dynamic data.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240822130722.1261891-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Currently the presence of a feature is checked with a combination of
perf version --build-options and greps, such as:
perf version --build-options | grep " on .* HAVE_FEATURE"
Instead of this, introduce a subcommand "perf check feature", with which
scripts can test for presence of a feature, such as:
perf check feature HAVE_FEATURE
'perf check feature' command is expected to have exit status of 0 if
feature is built-in, and 1 if it's not built-in or if feature is not known.
Multiple features can also be passed as a comma-separated list, in which
case the exit status will be 1 only if all of the passed features are
built-in. For example, with below command, it will have exit status of 0
only if both libtraceevent and bpf are enabled, else 1 in all other cases
perf check feature libtraceevent,bpf
The arguments are case-insensitive.
An array 'supported_features' has also been introduced that can be used by
other commands like 'perf version --build-options', so that new features
can be added in one place, with the array
Committer testing:
$ perf check feature libtraceevent,bpf
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ perf check feature libtraceevent
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
$ perf check feature bpf
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
$ perf check -q feature bpf && echo "BPF support is present"
BPF support is present
$ perf check -q feature Bogus && echo "Bogus support is present"
$
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904061836.55873-3-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, commands which depend on 'parse_options_subcommand()' don't
show the usage string, and instead show '(null)'
$ ./perf sched
Usage: (null)
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
'parse_options_subcommand()' is generally expected to initialise the usage
string, with information in the passed 'subcommands[]' array
This behaviour was changed in:
230a7a71f9 ("libsubcmd: Fix parse-options memory leak")
Where the generated usage string is deallocated, and usage[0] string is
reassigned as NULL.
As discussed in [1], free the allocated usage string in the main
function itself, and don't reset usage string to NULL in
parse_options_subcommand
With this change, the behaviour is restored.
$ ./perf sched
Usage: perf sched [<options>] {record|latency|map|replay|script|timehist}
-D, --dump-raw-trace dump raw trace in ASCII
-f, --force don't complain, do it
-i, --input <file> input file name
-v, --verbose be more verbose (show symbol address, etc)
[1]: https://lore.kernel.org/linux-perf-users/htq5vhx6piet4nuq2mmhk7fs2bhfykv52dbppwxmo3s7du2odf@styd27tioc6e/
Fixes: 230a7a71f9 ("libsubcmd: Fix parse-options memory leak")
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Aditya Gupta <adityag@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240904061836.55873-2-adityag@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the former commits, the callback of isochronous context runs on usual
work process. In the case, ALSA PCM device has a flag, nonatomic, to
acquire mutex lock instead of spin lock for PCM substream group.
This commit uses the flag. It has an advantage in the case that ALSA PCM
application uses the large size of intermediate buffer, since it takes
too long time even in tasklet softIRQ to process many of isochronous
packets, then result in the delay of system event due to disabled IRQ so
long. It is avertible to switch to nonatomic operation.
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the former commits, the callback of isochronous context runs on work
process, thus no need to use atomic memory allocation.
This commit replaces GFP_ATOMIC with GCP_KERNEL in the callback for user
client.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit queues work item for IT/IR events at hardIRQ handler to operate
the corresponding isochronous context. The work item is queued to any of
worker-pools.
The callback for either the implementation of unit protocol and user space
clients is executed in sleepable work process context. The change could
results in any errors of concurrent processing as well as sleep at atomic
context. These errors are fixed by the following commits.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
In the previous commit, the workqueue is added per the instance of fw_card
structure for isochronous contexts. The workqueue is designed to be used by
the implementation of fw_card_driver structure underlying the fw_card.
This commit adds some local APIs to be used by the implementation.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
This commit adds a workqueue dedicated for isochronous context processing.
The workqueue is allocated per instance of fw_card structure to satisfy the
following characteristics descending from 1394 OHCI specification:
In 1394 OHCI specification, memory pages are reserved to each isochronous
context dedicated to DMA transmission. It allows to operate these
per-context pages concurrently. Software can schedule hardware interrupt
for several isochronous context to the same cycle, thus WQ_UNBOUND is
specified. Additionally, it is sleepable to operate the content of pages,
thus WQ_BH is not used.
The isochronous context delivers the packets with time stamp, thus
WQ_HIGHPRI is specified for semi real-time data such as IEC 61883-1/6
protocol implemented by ALSA firewire stack. The isochronous context is not
used by the implementation of SCSI over IEEE1394 protocol (sbp2), thus
WQ_MEM_RECLAIM is not specified.
It is useful for users to adjust cpu affinity of the workqueue depending
on their work loads, thus WQ_SYS is specified to expose the attributes to
user space.
Tested-by: Edmund Raile <edmund.raile@protonmail.com>
Link: https://lore.kernel.org/r/20240904125155.461886-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
On arm64 the breakpoint length should be 4-bytes but 8-bytes is
tolerated as perf passes that as sizeof(long). Just pass the correct
value.
On i386 the sizeof(long) check in the kernel needs to match the
kernel's long size. Check using an environment (uname checks) whether
4 or 8 bytes needs to be passed. Cache the value in a static.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The default breakpoint length is "sizeof(long)" however this is
incorrect on platforms like Aarch64 where sizeof(long) is 8 but the
breakpoint length is 4. Add a helper function that can be used to
determine the correct breakpoint length, in this change it just
returns the existing default sizeof(long) value.
Use the helper in the bp_account test so that, when modifying the
event from a watchpoint to a breakpoint, the breakpoint length is
appropriate for the architecture and not just sizeof(long).
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240904050606.752788-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Marc Kleine-Budde <mkl@pengutronix.de> says:
This series adds support for the CAN-FD IP core found on the Rockchip
RK3568.
The IP core is a bit complicated and has several documented errata.
The driver is added in several stages, first the base driver including
the RX-path. Then several workarounds for errata and the TX-path, and
finally features like hardware time stamping, loop-back mode and
bus error reporting.
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-0-8ae22bcb27cc@pengutronix.de
[mkl: removed DTS patches]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The dell battery patch added dell_send_request_for_tokenid() and
dell_set_std_token_value(), which encapsulates a very common pattern
when SMBIOS queries are addressed to token->location. This calls them
in various places outside of the dell laptop code, allowing us to delete
a bunch of code.
Also some very minor cleanups:
- mark the kbd init functions as __init
- don't read buffer.output unless dell_send_request() was successful.
- actually return errors from micmute_led_set/mute_led_set instead of
always returning 0.
Only minor behavior changes; the delayed read of buffer.output and
actually returning errors for the brightness_set_blocking hooks.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033335.4f68b162@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Dell BIOS allows you to set custom charging modes, which is useful
in particular for extending battery life. This adds support for tweaking
those various settings from Linux via sysfs knobs. One might, for
example, have their laptop plugged into power at their desk the vast
majority of the time and choose fairly aggressive battery-saving
settings (eg, only charging once the battery drops below 50% and only
charging up to 80%). When leaving for a trip, it would be more useful
to instead switch to a standard charging mode (top off at 100%, charge
any time power is available). Rebooting into the BIOS to change the
charging mode settings is a hassle.
For the Custom charging type mode, we reuse the common
charge_control_{start,end}_threshold sysfs power_supply entries. The
BIOS also has a bunch of other charging modes (with varying levels of
usefulness), so this also adds a 'charge_type' sysfs entry that maps the
standard values to Dell-specific ones.
This work is based on a patch by Perry Yuan <perry_yuan@dell.com> and
Limonciello Mario <Mario_Limonciello@Dell.com> submitted back in 2020.
Hans de Goede:
s/charge_type/charge_types/ since charge_types_show() used the new
charge_types power-supply property output format.
Signed-off-by: Andres Salomon <dilinger@queued.net>
Reviewed-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20240820033005.09e03af1@5400
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The previous commit prepared the TX path to make use of the full
TX-FIFO depth as much as possible. Increase the available TX-FIFO
depth to the hardware maximum of 2.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-17-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
So far the TX-FIFO is only used with a depth of 1, although the
hardware offers a depth of 2.
The workaround for the chips that are affected by erratum 6, i.e. EFF
frames may be send as standard frames, is to re-send the EFF frame.
This means the driver cannot queue the next frame for sending, as long
ad the EFF frame has not been successfully send out.
Introduce rkcanfd_get_effective_tx_free() that returns "0" space in
the TX-FIFO if an EFF frame is pending and the actual free space in
the TX-FIFO otherwise. Then replace rkcanfd_get_tx_free() with
rkcanfd_get_effective_tx_free() everywhere.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-16-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver contains workarounds for some of the rk3568v2 errata. Add
ethtool-based statistics ("ethtool -S") to track how often an erratum
workaround was needed.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-15-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests show that sometimes both CAN bus error counters read 0x0, even
if the controller is in warning mode
(RKCANFD_REG_STATE_ERROR_WARNING_STATE in RKCANFD_REG_STATE
set).
To work around this issue, if both error counters read from hardware
are 0x0, use the structure priv->bec, otherwise save the read value in
priv->bec.
In rkcanfd_handle_rx_int_one() decrement the priv->bec.rxerr for
successfully RX'ed CAN frames.
In rkcanfd_handle_tx_done_one() decrement the priv->bec.txerr for
successfully TX'ed CAN frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-14-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| A dominant bit at the third bit of the intermission may cause a
| transmission error.
|
| When sampling the third bit of the intermission as a dominant bit, if
| tx_req is configured to transmit extended frames at this time, the
| extended frame may be sent to the bus in the format of a standard
| frame. The extended frame will be sent as a standard frame and will not
| result in error frames
Turn on "Interframe Spaceing RX Mode" only during TX to work around
erratum 12, according to rock-chip:
| Spaceing RX Mode = 1, the third Bit between frames cannot receive
| and send, and the fourth Bit begins to receive and send.
|
| Spaceing RX Mode = 0, allowing the third Bit between frames to
| receive and send.
Message-ID: <be72939f-0a9e-0608-dfff-7b0096a26eba@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-13-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| The CAN controller's transmission of extended frames may
| intermittently change into standard frames.
|
| When using the CAN controller to send extended frames, if the
| 'tx_req' is configured as 1 and coincides with the internal
| transmission point, the extended frame will be transmitted onto the
| bus in the format of a standard frame.
To work around Erratum 6, the driver is in self-receiving mode (RXSTX)
and all received CAN frames are passed through rkcanfd_rxstx_filter().
Add a check in rkcanfd_rxstx_filter() whether the received frame
corresponds to the current outgoing frame, but the extended CAN ID has
been mangled to a standard ID. In this case re-send the original CAN
frame.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-12-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The IP core has a TX event FIFO. In other IP cores, this type of FIFO
usually contains the events that a CAN frame has been successfully
sent. However, the IP core on the rk3568v2 the FIFO also holds events
of unsuccessful transmission attempts.
It turned out that the best way to work around this problem is to set
the IP core to self-receive mode (RXSTX), filter out the self-received
frames and insert them into the complete TX path.
Add a pair new functions to check if 2 struct canfd_frame are equal.
The 1st checks if the header of the CAN frames are equal, the 2nd
checks if the data portion are equal:
- rkcanfd_can_frame_header_equal()
- rkcanfd_can_frame_data_equal()
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-11-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests on the rk3568v2 and rk3568v3 show that a reduced "baudclk" (e.g.
80MHz, compared to the standard 300MHz) significantly increases the
possibility of incorrect FIFO counters, i.e. erratum 5.
Print an info message if the clock is below the known good value of
300MHz.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-10-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
| abnormal counting behavior.
|
| Due to a bug in the cross-asynchronous logic of the enable signals
| for rx_fifo_cnt and txe_fifo_frame_cnt counters, the counts of these
| two counters become inaccurate. This issue has resulted in the
| inability to use the TXFIFO and RXFIFO functions.
The errata sheet mentioned above states that only the rk3568v2 is
affected by this erratum, but tests with the rk3568v2 and rk3568v3
show that the RX_FIFO_CNT is sometimes too high. This leads to CAN
frames being read from the FIFO, which is then already empty.
Further tests on the rk3568v2 and rk3568v3 show that in this
situation (i.e. empty FIFO) all elements of the FIFO
header (frameinfo, id, ts) contain the same data.
On the rk3568v2 and rk3568v3, this problem only occurs extremely
rarely with the standard clock of 300 MHz, but almost immediately at
80 MHz.
To workaround this problem, check for empty FIFO with
rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
early.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-9-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The errata sheets doesn't say anything about CAN-FD, but tests on the
rk3568v2 and rk3568v3 show that receiving certain CAN-FD frames
triggers an Error Interrupt.
Mark the CAN-FD support as broken.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-6-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add driver for the Rockchip CAN-FD controller.
The IP core on the rk3568v2 SoC has 12 documented errata. Corrections
for these errata will be added in the upcoming patches.
Since several workarounds are required for the TX path, only add the
base driver that only implements the RX path.
Although the RX path implements CAN-FD support, it's not activated in
ctrlmode_supported, as the IP core in the rk3568v2 has problems with
receiving or sending certain CAN-FD frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-4-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In commit 0f66af5301 ("ACPI: battery: asynchronous init") the ACPI
battery driver switched to a custom async driver probing to avoid
delaying the system boot.
In the meantime the driver core gained its own async probing logic for
"slow devices which probing order is not essential for booting the system".
Switch over to the core logic and drop the custom one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20240903-acpi-battery-async-v1-1-e4deb74fcdba@weissschuh.net
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Standardize directory variables to support more flexible installations.
- Add copyright and licensing information to the Makefile.
- Introduce ".PHONY" declarations to ensure that specific targets are always
executed, regardless of the presence of files with matching names.
- Add a help target to provide usage instructions.
Signed-off-by: Amit Vadhavana <av2082000@gmail.com>
Acked-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Link: https://patch.msgid.link/Update directory handling and installation process in Makefile
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
By default, sleepgraph.py creates suspend-{date}-{time} directories
to store artifacts, or suspend-{date}-{time}-xN if the --multi option
is used.
Ignore those directories by adding a .gitignore file.
Signed-off-by: Yo-Jung (Leo) Lin <0xff07@gmail.com>
Acked-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Link: https://patch.msgid.link/20240825095353.7578-1-0xff07@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
