A small set of device specific fixes, the most major one is for the GXP
driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmUVfbcACgkQJNaLcl1U
h9CrRAf+PmW5OJYtAsOo987ro01DvIWv5XDhEQjljQB5Dd+qbPL5XvR9cKpk4KUc
kyvsWFS517Z298XItVGp+xDXrllvRjLn1ShUEoisEG8M+j84GN5M/eKw7W1Q7GxX
iPUTdsgKJRhnKxtvuKtCpmBT24Ari54AiPHtS2tyZGJeo9ehdaUG+LIsJS/zzUuh
KqfBBS7Gc9KE9alWqTeIx8Q2/ecVk3LEzdITPnNIkcXRHs2sUWGbs8O/u8ZNoD0F
4+vibLweDQ+SNlYVGjSJAG6Qq9dikIPDZlW+WSv/aGuf4MR1gE6sl97Okwb1q26r
sg6wbt/pDrYHOA33ZzoV5IMvjzsBRQ==
=SQJb
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small set of device specific fixes, the most major one is for the
GXP driver which would probably have been confusing some callers with
returning the length rather than 0 on successful writes"
* tag 'spi-fix-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-gxp: BUG: Correct spi write return value
dt-bindings: spi: fsl-imx-cspi: Document missing entries
spi: cs42l43: Remove spurious pm_runtime_disable
The memory layout of struct vfio_device_ioeventfd is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance that 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
The code that uses struct vfio_device_ioeventfd already works correctly
when the struct size grows, so only the struct definition needs to be
changed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-4-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The memory layout of struct vfio_device_gfx_plane_info is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance of 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-3-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
u64 alignment behaves differently depending on the architecture and so
<uapi/linux/types.h> offers __aligned_u64 to achieve consistent behavior
in kernel<->userspace ABIs.
There are structs in <uapi/linux/vfio.h> that can trivially be updated
to __aligned_u64 because the struct sizes are multiples of 8 bytes.
There is no change in memory layout on any CPU architecture and
therefore this change is safe.
The commits that follow this one handle the trickier cases where
explanation about ABI breakage is necessary.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-2-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Support Bus master enable and disable on VFIO-CDX devices using
VFIO_DEVICE_FEATURE_BUS_MASTER flag over VFIO_DEVICE_FEATURE IOCTL.
Co-developed-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-3-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
add bus mastering control to VFIO_DEVICE_FEATURE IOCTL. The VFIO user
can use this feature to enable or disable the Bus Mastering of a
device bound to VFIO.
Co-developed-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-2-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Introduce cdx_set_master() and cdx_clear_master() APIs to support
enable and disable of bus mastering. Drivers need to use these APIs to
enable/disable DMAs from the CDX devices.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit ac91e69805 ("PCI: Unify delay handling for reset and resume")
shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100
msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required
for Conventional PCI.
But it turns out that there are PCIe devices which require a longer delay
than prescribed before first config space access after reset recovery or
resume from D3cold:
Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator
"raises a PCI system error (PERR), as reported by the IPMI event log, and
the hardware itself would suffer a catastrophic event, cycling the server"
unless the longer delay is observed.
The card is specified to conform to PCIe r1.0 and indeed only supports Gen1
speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same
100 msec delay as PCIe r6.1 sec 6.6.1:
To allow components to perform internal initialization, system software
must wait for at least 100 ms from the end of a reset (cold/warm/hot)
before it is permitted to issue Configuration Requests
The behavior of the Torrent QN16e card thus appears to be a quirk. Treat
it as such and lengthen the reset delay for this specific device.
Fixes: ac91e69805 ("PCI: Unify delay handling for reset and resume")
Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de
Reported-by: Chad Schroeder <CSchroeder@sonifi.com>
Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/
Tested-by: Chad Schroeder <CSchroeder@sonifi.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.4+
When IPI virtualization is enabled, a WARN is triggered if bit12 of ICR
MSR is set after APIC-write VM-exit. The reason is kvm_apic_send_ipi()
thinks the APIC_ICR_BUSY bit should be cleared because KVM has no delay,
but kvm_apic_write_nodecode() doesn't clear the APIC_ICR_BUSY bit.
Under the x2APIC section, regarding ICR, the SDM says:
It remains readable only to aid in debugging; however, software should
not assume the value returned by reading the ICR is the last written
value.
I.e. the guest is allowed to set bit 12. However, the SDM also gives KVM
free reign to do whatever it wants with the bit, so long as KVM's behavior
doesn't confuse userspace or break KVM's ABI.
Clear bit 12 so that it reads back as '0'. This approach is safer than
"do nothing" and is consistent with the case where IPI virtualization is
disabled or not supported, i.e.,
handle_fastpath_set_x2apic_icr_irqoff() -> kvm_x2apic_icr_write()
Opportunistically replace the TODO with a comment calling out that eating
the write is likely faster than a conditional branch around the busy bit.
Link: https://lore.kernel.org/all/ZPj6iF0Q7iynn62p@google.com/
Fixes: 5413bcba7e ("KVM: x86: Add support for vICR APIC-write VM-Exits in x2APIC mode")
Cc: stable@vger.kernel.org
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Tested-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://lore.kernel.org/r/20230914055504.151365-1-tao1.su@linux.intel.com
[sean: tweak changelog, replace TODO with comment, drop local "val"]
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=g9gX
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix high_memory calculation and module loader errors with latest
binutils"
* tag 'loongarch-fixes-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Add support for 64_PCREL relocation type
LoongArch: Add support for 32_PCREL relocation type
LoongArch: Define relocation types for ABI v2.10
LoongArch: numa: Fix high_memory calculation
Rename structure fields holding temperature values in deci-Kelvin so as
to avoid temperature units confusion.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The critical_valid and hot_valid flags in struct acpi_thermal_trips are
only used during initialization and they are only false if the
corresponding trip temperatures are equal to THERMAL_TEMP_INVALID, so
drop them and use THERMAL_TEMP_INVALID checks instead of them where
applicable.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rearrange the ACPI thermal driver's callback functions used for cooling
device binding and unbinding, acpi_thermal_bind_cooling_device() and
acpi_thermal_unbind_cooling_device(), respectively, so that they use trip
pointers instead of trip indices which is more straightforward and allows
the driver to become independent of the ordering of trips in the thermal
zone structure.
The general functionality is not expected to be changed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-----BEGIN PGP SIGNATURE-----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=O/EB
-----END PGP SIGNATURE-----
Merge tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
- fix Alchemy build with MMC support disabled
* tag 'mips-fixes_6.6_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Alchemy: only build mmc support helpers if au1xmmc is enabled
When running android emulator (which is based on QEMU 2.12) on
certain Intel hosts with kernel version 6.3-rc1 or above, guest
will freeze after loading a snapshot. This is almost 100%
reproducible. By default, the android emulator will use snapshot
to speed up the next launching of the same android guest. So
this breaks the android emulator badly.
I tested QEMU 8.0.4 from Debian 12 with an Ubuntu 22.04 guest by
running command "loadvm" after "savevm". The same issue is
observed. At the same time, none of our AMD platforms is impacted.
More experiments show that loading the KVM module with
"enable_apicv=false" can workaround it.
The issue started to show up after commit 8e6ed96cdd ("KVM: x86:
fire timer when it is migrated and expired, and in oneshot mode").
However, as is pointed out by Sean Christopherson, it is introduced
by commit 967235d320 ("KVM: vmx: clear pending interrupts on
KVM_SET_LAPIC"). commit 8e6ed96cdd ("KVM: x86: fire timer when
it is migrated and expired, and in oneshot mode") just makes it
easier to hit the issue.
Having both commits, the oneshot lapic timer gets fired immediately
inside the KVM_SET_LAPIC call when loading the snapshot. On Intel
platforms with APIC virtualization and posted interrupt processing,
this eventually leads to setting the corresponding PIR bit. However,
the whole PIR bits get cleared later in the same KVM_SET_LAPIC call
by apicv_post_state_restore. This leads to timer interrupt lost.
The fix is to move vmx_apicv_post_state_restore to the beginning of
the KVM_SET_LAPIC call and rename to vmx_apicv_pre_state_restore.
What vmx_apicv_post_state_restore does is actually clearing any
former apicv state and this behavior is more suitable to carry out
in the beginning.
Fixes: 967235d320 ("KVM: vmx: clear pending interrupts on KVM_SET_LAPIC")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Haitao Shan <hshan@google.com>
Link: https://lore.kernel.org/r/20230913000215.478387-1-hshan@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently if an SEV-ES VM shuts down userspace sees KVM_RUN struct with
only errno=EINVAL. This is a very limited amount of information to debug
the situation. Instead return KVM_EXIT_SHUTDOWN to alert userspace the VM
is shutting down and is not usable any further.
Signed-off-by: Peter Gonda <pgonda@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230907162449.1739785-1-pgonda@google.com
[sean: tweak changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Merge thermal core changes for v6.7 depended on by subsequent ACPI
thermal driver changes:
- Drop trips_disabled bitmask that is not really useful any more from
the thermal zone structure.
- Drop a reduntant NULL pointer check from for_each_thermal_trip().
- Redefine struct thermal_instance to hold a thernal trip pointer
instead of a trip index.
- Add helpers for binding and unbinding cooling devices to and from
trip points, reslectively, that take trip pointers as arguments.
* thermal-core:
thermal: core: Allow trip pointers to be used for cooling device binding
thermal: core: Store trip pointer in struct thermal_instance
thermal: trip: Drop redundant trips check from for_each_thermal_trip()
thermal: core: Drop trips_disabled bitmask
After removing the valid flag from struct acpi_thermal_trip, the trip
temperature value is used in validity checks, so it must be
THERMAL_TEMP_INVALID for the active trip entries in struct acpi_thermal_trips
that are not going to be used (because the corresponding objects are not
present in the ACPI tables, for example).
Accordingly, modify acpi_thermal_get_trip_points() to set the temperature
value to THERMAL_TEMP_INVALID for trip point entries skipped by it after
acpi_thermal_init_trip() has returned 'false' for an active trip.
Fixes: 058f5e407d ("ACPI: thermal: Drop valid flag from struct acpi_thermal_trip")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The sanitizer flag, which is supported by both clang and gcc, would make
it easier to debug array index out-of-bounds problems in these programs.
Make the Makfile smarter to detect ubsan support from the compiler and
add the '-fsanitize=bounds' accordingly.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jinghao Jia <jinghao@linux.ibm.com>
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Ruowen Qin <ruowenq2@illinois.edu>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230927045030.224548-2-ruowenq2@illinois.edu
ath.git patches for v6.7.
Major changes:
ath12k
* WCN7850: enable 320 MHz channels in 6 GHz band
* WCN7850: hardware rfkill support
* WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
* add chip id board name while searching board-2.bin
Fix a misspelling of "preceding".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Since 'u8' comparison against zero is always false, drop the
corresponding branches of AMPDU_MIN_SPACE adjustment within
'rtlxxxx_set_hw_reg()' for rtl8188ee, rtl8192ce, rtl8192de,
rtl8723ae, rtl8723be, and rtl8821ae. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230925090452.25633-1-dmantipov@yandex.ru
Add a Kconfig entry to set the maximum number of vCPUs per KVM guest and
set the default value to 4096 when MAXSMP is enabled, as there are use
cases that want to create more than the currently allowed 1024 vCPUs and
are more than happy to eat the memory overhead.
The Hyper-V TLFS doesn't allow more than 64 sparse banks, i.e. allows a
maximum of 4096 virtual CPUs. Cap KVM's maximum number of virtual CPUs
to 4096 to avoid exceeding Hyper-V's limit as KVM support for Hyper-V is
unconditional, and alternatives like dynamically disabling Hyper-V
enlightenments that rely on sparse banks would require non-trivial code
changes.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Link: https://lore.kernel.org/r/20230824215244.3897419-1-kyle.meyer@hpe.com
[sean: massage changelog with --verbose, document #ifdef mess]
Signed-off-by: Sean Christopherson <seanjc@google.com>
MCC (multi-channel concurrency) supports two combinations as below.
* P2P-GO + STA
* P2P-GC + STA
We add the corresponding ieee80211_iface_limit for it into
ieee80211_iface_combination.
Besides, for multiple channels, it must run with mac80211 chanctx.
So, only with it, ieee80211_iface_combination can allow MCC case.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-5-pkshih@realtek.com
We are going to allow RTL8852C to support MCC (multi-channel concurrency).
So, we increase 8852c::support_chanctx_num up to 2.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-4-pkshih@realtek.com
During (TDMA-based) MCC (multi-channel concurrency), the below two
cases might not have a good behavior on channel usage.
* ROC (remain on channel)
* HW scan
So, we tend to separate them from MCC.
The two cases would expect to operate the channel to which they want.
However, during MCC, channels are scheduled by FW MCC state mechanism.
So, channels cannot be controlled explicitly. To avoid the two cases
from operating wrong channels with chance, we pause MCC (essentially
stop FW MCC) once the two cases are coming. And then, we proceed MCC
again (essentially restart FW MCC) once the two cases finish.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-3-pkshih@realtek.com
Under TDMA-based MCC (multi-channel concurrency), there are two roles,
reference and auxiliary. We arrange MCC timeline based on time domain
of reference role. Then, we calculate NoA start time according to MCC
timeline.
Besides, when MCC runs GO+STA mode, we plan an offset between GO time
domain and STA time domain to make their TBTTs have a time gap.
However, if GO is auxiliary role instead of reference role, NoA start
time is described by STA time domain instead of GO time domain. To fix
this, we apply the offset mentioned above to NoA start time to convert
time domain from STA to GO.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230921003559.11588-2-pkshih@realtek.com
The check on vga_gain[ch_idx] being less than zero is always false since
vga_gain is a u8 array. Clean up the code by removing the check and the
following assignment. Cleans up clang scan build warning:
drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9704:26: warning:
result of comparison of unsigned expression < 0 is always
false [-Wtautological-unsigned-zero-compare]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230920121240.120455-1-colin.i.king@gmail.com
Just as unevaluatedProperties or additionalProperties are required at
the top level of schemas, they should (and will) also be required for
child node schemas. That ensures only documented properties are
present for any node.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230926164553.102914-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Commit e8c1841278 ("wifi: cfg80211: annotate iftype_data pointer with
sparse") added sparse checks for struct ieee80211_sband_iftype_data handling
which immediately found an issue in ath11k:
drivers/net/wireless/ath/ath11k/mac.c:7952:22: warning: incorrect type in argument 1 (different address spaces)
drivers/net/wireless/ath/ath11k/mac.c:7952:22: expected struct ieee80211_sta_he_cap const *he_cap
drivers/net/wireless/ath/ath11k/mac.c:7952:22: got struct ieee80211_sta_he_cap const [noderef] __iftype_data *
The problem here is that we are accessing sband->iftype_data directly even
though we should use for_each_sband_iftype_data() or similar. Fortunately
there's ieee80211_get_he_iftype_cap_vif() which is just what we need here so
use it to get HE capabilities.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230927142708.2897504-2-kvalo@kernel.org
When compiling with clang 16.0.6, I've noticed the following:
drivers/net/wireless/ath/ath11k/mac.c:8903:12: warning: stack frame
size (1032) exceeds limit (1024) in 'ath11k_mac_op_remain_on_channel'
[-Wframe-larger-than]
static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw,
^
68/1032 (6.59%) spills, 964/1032 (93.41%) variables
So switch to kzalloc()'ed instance of 'struct scan_req_params' like
it's done in 'ath11k_mac_op_hw_scan()'. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230926042906.13725-1-dmantipov@yandex.ru
WCN7850 and QCN9274 currently use the same structure rx_msdu_end_qcn9274
for msdu_end. But content of msdu_end on WCN7850 is different from that of
QCN9274. Need to update it for WCN7850, otherwise will get the wrong
values when using it.
For example, TID is no longer in WCN7850's msdu_end. But
ath12k_dp_rx_process_err() and ath12k_dp_rx_process_wbm_err() still get
TID from msdu_end. So an uncertain value will be used in these two
functions on WCN7850.
Therefore, add new structure rx_msdu_end_wcn7850 for WCN7850.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230911093054.74943-1-quic_kangyang@quicinc.com
Currently, firmware does not like when beacon mode is set as staggered
mode for more than one beaconing vifs. Beacon mode for multiple
beaconing (transmitted) vifs are expected to be in burst mode. So set
beacon mode to burst mode by default.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sidhanta Sahu <quic_sidhanta@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905213943.12275-1-quic_sidhanta@quicinc.com
Mac80211 does not set flags BSS_CHANGED_FILS_DISCOVERY and
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP if there are no updates to
FILS discovery and unsolicited broadcast probe response transmission
configurations respectively. For BSS change operations such as channel
switch, this results in the transmissions getting stopped because the
driver does not send WMI command to firmware if the flags are not set.
Remove the checks for the flags to always send the existing
configuration to firmware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905174324.25296-1-quic_alokad@quicinc.com
No need cast (void *) to (struct ath11k_base *),
struct hal_rx_msdu_link *), (struct ath11k_buffer_addr *) or
other types.
Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230919045150.524304-1-yunchuan@nfschina.com
Currently mac80211 will send 3 scan request for each scan of WCN7850, they
are 2.4 GHz/5 GHz/6 GHz band scan. Firmware of WCN7850 will cache the RNR
IE(Reduced Neighbor Report element) which exist in the beacon of 2.4 GHz/5
GHz of the AP which is co-located with 6 GHz, and then use the cache to
scan in 6 GHz band scan if the 6 GHz scan is in the same scan with the 2.4
GHz/5 GHz band, this will helpful to search more AP of 6 GHz. Also it will
decrease the time cost of scan because firmware will use dual-band scan
for the 2.4 GHz/5 GHz, it means the 2.4 GHz and 5 GHz scans are doing
simultaneously.
Set the flag IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS for WCN7850 since it
supports 2.4 GHz/5 GHz/6 GHz in a single wiphy/ieee80211_hw.
This does not impact QCN9274, because it is not single_phy, so does not
have 2.4 GHz/5 GHz/6 GHz in the same wiphy, then it does not match the
condition and then IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS will not set for
QCN9274.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230913105507.17675-1-quic_wgong@quicinc.com
Some firmware versions for WCN7850 report the default regdomain with
alpha code "na" by default when load as a world wide regdomain,
ath12k should treat it as a world wide alpha code.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906090355.19181-1-quic_wgong@quicinc.com
ath12k prints "Received scan event for unknown vdev" when doing the
following test:
1. trigger scan
2. wait 0.2 second
3. iw reg set is issued or 11d scan complete event is sent from firmware
Reason is:
When iw reg set is issues or the 11d scan complete event is received, the
new country code will be set to the firmware, and the new regdomain info
indicated to ath12k, then the new channel list will be sent to the firmware.
The firmware will cancel the current scan after receiving WMI_SCAN_CHAN_LIST_CMDID
which is used for the new channel list, and the state of ath12k is
ATH12K_SCAN_RUNNING, then ath12k_get_ar_on_scan_abort() returns NULL and
ath12k_scan_event() returns at this point and does not indicate scan
completion to mac80211.
Indicate scan completion to mac80211 and get rid of the "Received scan
event for unknown vdev" print for the above case.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906085746.18968-1-quic_wgong@quicinc.com
Scan failure can not be recovered from when running a loop of the
following steps:
1. run scan: "iw wlan scan".
2. run command: echo assert > /sys/kernel/debug/ath12k/wcn7850\ hw2.0/simulate_fw_crash
immediately after step 1.
result:
scan failed and can not recover even when wlan recovery succeeds:
command failed: Device or resource busy (-16)
reason:
When scan arrives, WMI_START_SCAN_CMDID is sent to the firmware and
function ath12k_mac_op_hw_scan() returns, then simulate_fw_crash arrives
and the scan started event does not arrive, and then it starts to do
recovery of wlan. __ath12k_mac_scan_finish() which is called from
ath12k_core_halt() is one step of recovery, it will not call
ieee80211_scan_completed() by logic currently because the scan state is
ATH12K_SCAN_STARTING. Thus it leads the scan not being completed in
mac80211, and leads all consecutive scans failing with -EBUSY in
nl80211_trigger_scan even after wlan recovery success.
Indicate scan complete with aborted flag to mac80211 for
ATH12K_SCAN_STARTING to allow recovery from scan failed with "Device or
resource busy (-16)" after wlan recovery.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905105947.10369-1-quic_wgong@quicinc.com
When firmware crashed while channel switch running, recovery starts in
ath12k. Then ieee80211_sta_connection_lost() will be called by function
ieee80211_restart_work() in mac80211. And then many WMI command timeout
because firmware is crashed. Each WMI command cost 3 seconds, then the
total time will be large and leads recovery fail.
Hence change to set value ATH12K_FLAG_CRASH_FLUSH early and then
ath12k_wmi_cmd_send() will not wait 3 seconds, then recovery will be
started quickly and success.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230905105229.10090-1-quic_wgong@quicinc.com
When hardware rfkill is enabled in the firmware, it will report the
capability using WMI_SYS_CAP_INFO_RFKILL bit in the WMI_SERVICE_READY event
to the host. Currently ath12k does not process this service capability. In
order to support this, update ath12k to check if the capability is enabled,
if so, send the GPIO information to firmware. When the firmware detects
hardware rfkill is enabled by the user, it will report it using
WMI_RFKILL_STATE_CHANGE_EVENTID. When ath12k receive the event, it will set
the value of rfkill_radio_on based on whether radio_state is equal to
WMI_RFKILL_RADIO_STATE_ON, then send WMI_PDEV_PARAM_RFKILL_ENABLE to
firmware.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230906110412.182176-1-quic_lingbok@quicinc.com
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the filtered_suite and filtered_suite->test_cases
allocated in the last kunit_filter_attr_tests() in last inner for loop
is leaked.
So add a new free_filtered_suite err label and free the filtered_suite
and filtered_suite->test_cases so far. And change kmalloc_array of copy
to kcalloc to Clear the copy to make the kfree safe.
Fixes: 529534e8cb ("kunit: Add ability to filter attributes")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the outer layer for loop is iterated more than once and it fails not
in the first iteration, the copy pointer has been moved. So it should free
the original copy's backup copy_start.
Fixes: abbf73816b ("kunit: fix possible memory leak in kunit_filter_suites()")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Define the common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields.
Currently different drivers that need to use these bitfields have defined
these locally. This common macro is intended to consolidate and replace
those.
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20230927-pcc_defines-v2-1-0b8ffeaef2e5@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
- update new features like bloom filter and DEFLATE.
- add documentation for the long xattr name prefixes, which was
landed upstream since v6.4.
Signed-off-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230928134852.31118-1-jefflexu@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
