Add a config option to disable odm dispclk optimization for debug
purpose.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable IPS by default till it is ready.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Currently, driver is not aware if IPS is supported. After PMFW helps
implement new message query functionality, driver will set IPS
capability flag.
[how]
Create new SMU hook function to query IPS capability. Based on the cap,
set appropriate flags to false for power-gating purposes. This will
avoid keeping SMU busy and offloading tasks to DMUB/driver.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Two issues fixed:
1. Currently, driver does not allow idle prior to PSR entry. Once
PSR1+IPS is enabled, there is intermittent hang due to DCN access
from IrqMgr during IPS2.
2. Driver is sending multiple commands to PMFW and dmcub to exit IPS
even during IPS0.
[How]
1. Set driver allow optimization prior to entering PSR mode with the
condition for eDP display only. Unregister all interrupts before
allowing driver idle and re-register interrupts when exiting from
idle. This will prevent IrqMgr to access DCN during IPS2.
2. Block sending PMFW and dmcub exit low power state commands when
driver is not in idle state.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Correct z8_watermark mask from 16bit to 20bit. Also, do not set dcn35
dprefclk in clk_mgr_construct.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The STREAM_MAPPER_CONTROL register offset was left uninitialized,
causing warning in the driver log at runtime
[How]
A temporary solution to add it into dcn35_create_resource_pool.
[TODO]
Remove duplication between SE_DCN35_REG_LIST_RI in dcn35_resource.h and
SE_DCN35_REG_LIST in dcn35_dio_stream_encoder.h
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pipe resource interfaces were changed.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For DPIA we should have preferred DIG assignment based on DPIA selected
as per the ASIC design
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
set_static_screen_control has been updated for DCN3 series. Update it
for DCN35.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung-huai Wang <danny.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call to immediate_disable_crtc was not checked before calling, exposing
a potential null pointer hang.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW ungate this feature, this can be enabled now
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add z8 watermarks to struct for DCN35.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some of the stream encoder registers have register offset address 0. It
is causing no display in some scenarios due to DIG_FE was not setup
correctly and was not enabled.
[How]
Fix stream encoder register define list.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Duncan Ma <duncan.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On eDP we can receive invalid modes from dm_update_crtc_state() for
entirely new streams for which drm_mode_set_crtcinfo() shouldn't be
called on. So, instead of calling drm_mode_set_crtcinfo() from within
create_stream_for_sink() we can instead call it from
amdgpu_dm_connector_mode_valid(). Since, we are guaranteed to only call
drm_mode_set_crtcinfo() for valid modes from that function (invalid
modes are rejected by that callback) and that is the only user
of create_validate_stream_for_sink() that we need to call
drm_mode_set_crtcinfo() for (as before commit cb841d27b8
("drm/amd/display: Always pass connector_state to stream validation"),
that is the only place where create_validate_stream_for_sink()'s
dm_state was NULL).
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2693
Fixes: cb841d27b8 ("drm/amd/display: Always pass connector_state to stream validation")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Temporarily disable dchubbub clock gating, registers:
.DISPCLK_R_DCHUBBUB_GATE_DIS
.DCFCLK_R_DCHUBBUB_GATE_DIS
need to follow up with sequence issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Leo Chen <sanchuan.chen@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Disable clock gating logic.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To prevent confusion after symclk has already been disabled.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of storing coredump information inside amdgpu_device struct,
move if to a proper separated struct and allocate it dynamically. This
will make it easier to further expand the logged information.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was never filled in and thus never truly used.
Checking the EDID for content_type support is not required for sending
the avi infoframe packet.
v2:
- rebase to amd-staging-drm-next
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implements the 'content type' property for HDMI connectors.
Verified by checking the avi infoframe on a connected TV.
This also simplifies a lot of the code in that area as well, there were
a lot of temp variables doing very little and unnecessary logic
that was quite confusing.
It is not necessary to check for support in the EDID before sending a
'content type' value in the avi infoframe also.
v2:
- rebase to amd-staging-drm-next
- mark CRTC state for reset if content_type differs
Reviewed-by: Harry Wentland <harry.wentland@amd.com> (v1)
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Co-developed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a memory leak in the amdgpu_ras_feature_enable() function.
The leak occurs when the function sends a command to the firmware to enable
or disable a RAS feature for a GFX block. If the command fails, the kfree()
function is not called to free the info memory.
Fixes: 9f051d6ff1 ("drm/amdgpu: Free ras cmd input buffer properly")
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Search for vbios version string in STRING_OFFSET-ATOM_ROM_HEADER region
first. If those offsets are not populated, use the hardcoded region.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 7748ce5b69.
vbios_version sysfs node is used to identify Part Number also. Revert to
the same so that it doesn't break scripts/software which parse this.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update smu header to support mca dump interface.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.
On GFX943 these flags cause caches to be avoided on
non-local memory.
On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.
Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where HSA runtime is not enabled through the
AMDKFD_IOC_RUNTIME_ENABLE call when adding queues and the MES ADD_QUEUE
API should clear the MES process context instead of SET_SHADER_DEBUGGER.
Such examples are legacy HSA runtime builds that do not support the
current exception handling and running KFD tests.
The only time ADD_QUEUE.skip_process_ctx_clear is required is for
debugger use cases where a debugged process is always runtime enabled
when adding a queue.
Tested-by: Shikai Guo <shikai.guo@amd.com>
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement low refresh rate (LRR) where we change the vblank
length by hand as requested, but otherwise keep the timing
generator running in non-VRR mode (ie. fixed refresh rate).
The panel itself must support VRR for this to work, and
only TGL+ has the double buffred TRANS_VTOTAL.VTOTAL that
we need to make the switch properly. The double buffer
latching happens at the start of transcoders undelayed
vblank. The other thing that we change is
TRANS_VBLANK.VBLANK_END but the hardware entirely ignores
that in DP mode. But I decided to keep writing it anyway
just to avoid more special cases in readout/state check.
v2: Document that TRANS_VBLANK.VBLANK_END is ignored by
the hardware
v3: Reconcile with VRR fastset
Adjust update_lrr flag behaviour
Make sure timings stay within VRR range
v4: Fix up update_m_n vs. update_lrr rebase fail (Manasi)
Drop DOUBLE_BUFFER_VACTIVE define as it's not needed (Manasi)
TODO: Hook LRR into the automatic DRRS downclocking stuff?
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230915103800.14218-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Whenever we change the actual transcoder timings (clock via
seamless M/N, full modeset, (or soon) vtotal via LRR) we
want the timing generator to be in non-VRR during the commit.
Warn if we forgot to turn VRR off prior to vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-12-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
We should be able to change any of the VRR parameters
during fastsets as long as we toggle VRR off at the start
and then back on at the end. The transcoder will be running
in non-VRR mode during the transition.
Co-developed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-11-ville.syrjala@linux.intel.com
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Make life less confusing by making sure VRR is disabled whenever
we do any drastic changes to the display timings, such as seamless
M/N changes.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-10-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Let's assume there are some crazy displays where the high
end of the VRR range ends up being lower than the refresh
rate as determined by the actual timings. In that case
when we toggle VRR on/off we would step outside the VRR
range when toggling VRR on/off. Let's just make sure that
never happens by not using VRR in such cases. If the user
really wants VRR they should then select the timings to
land within the VRR range.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-9-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Move is_in_vrr_range() into intel_vrr.c in anticipation of
more users, and rename it accordingly.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-8-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Don't perform a seamless M/N update if the values aren't actually
changing. This avoids doing extra shenanigans during vblank evasion
needlessly.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-7-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Make the seamless_m_n flag more like the update_pipe fastset
flag, ie. the flag will only be set if we need to do the seamless
M/N update, and in all other cases the flag is cleared. Also
rename the flag to update_m_n to make it more clear it's similar
to update_pipe.
I believe special casing seamless_m_n like this makes sense
as it also affects eg. vblank evasion. We can potentially avoid
some vblank evasion tricks, simplify some checks, and hopefully
will help with the VRR vs. M/N mess.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-6-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
In order to reconcile seamless M/N updates with VRR we'll
need to defer the fastset VRR enable to happen after the
seamless M/N update (which happens during the vblank evade
critical section). So just push the VRR enable to be the last
thing during the update.
This will also affect the vblank evasion as the transcoder
will now still be running with the old VRR state during
the vblank evasion. So just grab the timings always from the
old crtc state during any non-modeset commit, and also grab
the current state of VRR from the active timings (as we disable
VRR before vblank evasion during fastsets).
This also fixes vblank evasion for seamless M/N updates as
we now properly account for the fact that the M/N update
happens after vblank evasion.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Pull the vblank evasion scanline calculations into their own helper
to declutter intel_pipe_update_start() a bit.
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-4-ville.syrjala@linux.intel.com
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
We'll need to also look at the old crtc state in
intel_pipe_update_start() so change the calling convention to
just plumb in the full atomic state instead.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Do the PSR unlock after the vblank evade critcal section is
fully over, not before.
Cc: Manasi Navare <navaremanasi@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901130440.2085-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Introduce a new kselftest to detect devices that were declared in the
Devicetree, and are expected to be probed by a driver, but weren't.
The test uses two lists: a list of compatibles that can match a
Devicetree device to a driver, and a list of compatibles that should be
ignored. The first is automatically generated by the
dt-extract-compatibles script, and is run as part of building this test.
The list of compatibles to ignore is a hand-crafted list to capture the
few exceptions of compatibles that are expected to match a driver but
not be bound to it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230828211424.2964562-4-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add a new flag, '--driver-match', to the dt-extract-compatibles script
that causes it to only print out compatibles that are expected to match
a driver. This output can then be used by tests to detect device probe
failures.
In order to filter the compatibles down to only ones that will match to
a driver, the following is considered:
- A compatible needs to show up in a driver's of_match_table for it to
be matched to a driver
- Compatibles that are used in both of_match_table and OF_DECLARE type
macros can't be expected to match to a driver and so are ignored.
One exception is CLK_OF_DECLARE_DRIVER, since it indicates that a
driver will also later probe, so compatibles in this macro are not
ignored.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-3-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Tr0P
-----END PGP SIGNATURE-----
Merge tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- driver fixes due to incorrect fwnode_handle_put() call
- bt8xx: bttv_risc_packed(): remove field checks
- vb2: frame_vector.c: replace WARN_ONCE with a comment
- imx219: a couple typo fixes and perform a full mode set
unconditionally
- uvcvideo: Fix OOB read
- some dependency fixes
* tag 'media/v6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() call
media: vb2: frame_vector.c: replace WARN_ONCE with a comment
media: uvcvideo: Fix OOB read
media: bt8xx: bttv_risc_packed(): remove field checks
media: i2c: rdacm21: Remove an incorrect fwnode_handle_put() call
media: i2c: imx219: Perform a full mode set unconditionally
media: i2c: imx219: Fix crop rectangle setting when changing format
media: i2c: imx219: Fix a typo referring to a wrong variable
media: i2c: max9286: Remove an incorrect fwnode_handle_put() call
media: ivsc: Depend on VIDEO_DEV
media: via: Use correct dependency for camera sensor drivers
media: v4l: Use correct dependency for camera sensor drivers
media: pci: ivsc: Select build dependencies
Commit f98b6215d7 ("btrfs: extent_io: do extra check for extent buffer
read write functions") changed how we handle invalid extent buffer range
for read_extent_buffer().
Previously if the range is invalid we just set the destination to zero,
but after the patch we do nothing and error out.
This can lead to smatch static checker errors like:
fs/btrfs/print-tree.c:186 print_uuid_item() error: uninitialized symbol 'subvol_id'.
fs/btrfs/tests/extent-io-tests.c:338 check_eb_bitmap() error: uninitialized symbol 'has'.
fs/btrfs/tests/extent-io-tests.c:353 check_eb_bitmap() error: uninitialized symbol 'has'.
fs/btrfs/uuid-tree.c:203 btrfs_uuid_tree_remove() error: uninitialized symbol 'read_subid'.
fs/btrfs/uuid-tree.c:353 btrfs_uuid_tree_iterate() error: uninitialized symbol 'subid_le'.
fs/btrfs/uuid-tree.c:72 btrfs_uuid_tree_lookup() error: uninitialized symbol 'data'.
fs/btrfs/volumes.c:7415 btrfs_dev_stats_value() error: uninitialized symbol 'val'.
Fix those warnings by reverting back to the old memset() behavior.
By this we keep the static checker happy and would still make a lot of
noise when such invalid ranges are passed in.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f98b6215d7 ("btrfs: extent_io: do extra check for extent buffer read write functions")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A user reported some issues with smaller file systems that get very
full. While investigating this issue I noticed that df wasn't showing
100% full, despite having 0 chunk space and having < 1MiB of available
metadata space.
This turns out to be an overflow issue, we're doing:
total_available_metadata_space - SZ_4M < global_block_rsv_size
to determine if there's not enough space to make metadata allocations,
which overflows if total_available_metadata_space is < 4M. Fix this by
checking to see if our available space is greater than the 4M threshold.
This makes df properly report 100% usage on the file system.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running a delayed extent operation, if we don't find the extent item
in the extent tree we just return -EIO without any logged message. This
indicates some bug or possibly a memory or fs corruption, so the return
value should not be -EIO but -EUCLEAN instead, and since it's not expected
to ever happen, print an informative error message so that if it happens
we have some idea of what went wrong, where to look at.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At __btrfs_inc_extent_ref() we are doing a BUG_ON() if we are dealing with
a tree block reference that has a reference count that is different from 1,
but we have already dealt with this case at run_delayed_tree_ref(), making
it useless. So remove the BUG_ON().
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When running a delayed tree reference, if we find a ref count different
from 1, we return -EIO. This isn't an IO error, as it indicates either a
bug in the delayed refs code or a memory corruption, so change the error
code from -EIO to -EUCLEAN. Also tag the branch as 'unlikely' as this is
not expected to ever happen, and change the error message to print the
tree block's bytenr without the parenthesis (and there was a missing space
between the 'block' word and the opening parenthesis), for consistency as
that's the style we used everywhere else.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When starting a transaction, with a non-zero number of items, we reserve
metadata space for that number of items and for delayed refs by doing a
call to btrfs_block_rsv_add(), with the transaction block reserve passed
as the block reserve argument. This reserves metadata space and adds it
to the transaction block reserve. Later we migrate the space we reserved
for delayed references from the transaction block reserve into the delayed
refs block reserve, by calling btrfs_migrate_to_delayed_refs_rsv().
btrfs_migrate_to_delayed_refs_rsv() decrements the number of bytes to
migrate from the source block reserve, and this however may result in an
underflow in case the space added to the transaction block reserve ended
up being used by another task that has not reserved enough space for its
own use - examples are tasks doing reflinks or hole punching because they
end up calling btrfs_replace_file_extents() -> btrfs_drop_extents() and
may need to modify/COW a variable number of leaves/paths, so they keep
trying to use space from the transaction block reserve when they need to
COW an extent buffer, and may end up trying to use more space then they
have reserved (1 unit/path only for removing file extent items).
This can be avoided by simply reserving space first without adding it to
the transaction block reserve, then add the space for delayed refs to the
delayed refs block reserve and finally add the remaining reserved space
to the transaction block reserve. This also makes the code a bit shorter
and simpler. So just do that.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
