Modify the sysfs attribute description in ABI/stable documentation for
the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062823.1743180-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kernel PASID and user PASID are separately enabled. User needs to know the
user PASID enabling status to decide how to use IDXD device in user space.
This is done via the attribute /sys/bus/dsa/devices/dsa0/pasid_enabled.
It's unnecessary for user to know the kernel PASID enabling status because
user won't use the kernel PASID. But instead of showing the user PASID
enabling status, the attribute shows the kernel PASID enabling status. Fix
the issue by showing the user PASID enabling status in the attribute.
Fixes: 42a1b73852 ("dmaengine: idxd: Separate user and kernel pasid enabling")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230614062706.1743078-1-rex.zhang@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The runtime PM state must be updated while runtime PM is disabled for
the change to take effect.
Drop the bogus pm_runtime_set_active() which left the PM state set to
suspended (as it should be or the clock would not be enabled when the
device is resumed).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622075150.885-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The BAM DMA resources can be controlled remotely (e.g. by trusted
environment; needs qcom,powered-remotely or qcom,controlled-remotely
properties) or locally. In the latter case we need to provide its
clock.
Require one of methods of such control to properly validate DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230626145645.646136-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert the DT binding document for bcm2835-dma from .txt to YAML.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230617133620.53129-3-stefan.wahren@i2se.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since SM8250 BAM DMA engine supports six iommu entries,
increase the maxItems in the iommu property section, without
which 'dtbs_check' would throw errors.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new compatible for BAM DMA engine version v1.7.4 which is
found on Qualcomm SM6115 and QCM2290 SoCs. Since its very similar
to v1.7.0 used on SM8150 like SoCs, mark the comptible scheme
accordingly.
While at it, also update qcom,bam-dma bindings to add comments
which describe the BAM DMA versions used in SM8150 and SM8250 SoCs.
This provides an easy reference for identifying the actual BAM DMA
version available on Qualcomm SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Tested-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230705081856.13734-5-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705081856.13734-3-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705081856.13734-2-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230705081856.13734-1-frank.li@vivo.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Before setting DDS and SDS values, we need to clear its value first
otherwise, we get incorrect results when we change/update the DMA bus
width several times due to the 'OR' expression.
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Cc: stable@kernel.org
Signed-off-by: Hien Huynh <hien.huynh.px@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230706112150.198941-3-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We usually do cleanup in reverse order of init. Currently, in the
case of error, this is not followed in rz_dmac_probe(), and similar
case for remove().
This patch improves error handling in probe() and cleanup in
reverse order of init in the remove().
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Pavel Machek <pavel@denx.de>
Link: https://lore.kernel.org/r/20230706112150.198941-2-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it
won't be built to cause below compiling error if PCI is unset.
--------
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/fsl-edma.ko] undefined!
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/dma/idma64.ko] undefined!
--------
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/
Signed-off-by: Baoquan He <bhe@redhat.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Link: https://lore.kernel.org/r/20230707135852.24292-2-bhe@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If any error handling that disables the controller fails to queue the
reset work, like if the state changed to disconnected inbetween, then
the failed teardown needs to unquiesce the queues since it's no longer
paired with reset_work. Just make sure that the controller can be put
into a resetting state prior to starting the disable so that no other
handling can change the queue states while recovery is happening.
Reported-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There is a small race window between nvme-fc association creation and error
recovery. Fix this race condition by protecting accessing to controller
state and ASSOC_FAILED flag under nvme-fc controller lock.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Return non-zero status code(-EIO) when needed, so re-connecting or
deleting controller will be triggered properly.
Signed-off-by: Michael Liang <mliang@purestorage.com>
Reviewed-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
As context structure is shared memory for CPU/GPU, Wa_22016122933 is
needed for this memory block as well.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
CC: Fei Yang <fei.yang@intel.com>
Reviewed-by: Fei Yang <fei.yang@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230706174704.177929-1-zhanjun.dong@intel.com
Add the '-@' DTC option for the starfive devices. This option
populates the '__symbols__' node that contains all the necessary symbols
for supporting device-tree overlays (for instance from the firmware or
the bootloader) on these devices.
The starfive devices allow various modules to be connected and this
enables users to create out-of-tree device-tree overlays for these modules.
Please note that this change does increase the size of the resulting DTB
by ~20%. For example, with v6.4 increase in size is as follows:
jh7100-beaglev-starlight.dtb 6192 -> 7339
jh7100-starfive-visionfive-v1.dtb 6281 -> 7428
jh7110-starfive-visionfive-2-v1.2a.dtb 11101 -> 13447
jh7110-starfive-visionfive-2-v1.3b.dtb 11101 -> 13447
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Quash 175 kernel-doc warnings in dc.h by unmarking 2 struct
comments as containing kernel-doc notation and by spelling one
struct field correctly in a kernel-doc comment.
Fixes: 1682bd1a6b ("drm/amd/display: Expand kernel doc for DC")
Fixes: ea76895ffa ("drm/amd/display: Document pipe split policy")
Fixes: f6ae69f49f ("drm/amd/display: Include surface of unaffected streams")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: dri-devel@lists.freedesktop.org
Rename struct amdgpu_vm_tlb_seq_cb {...} to struct amdgpu_vm_tlb_seq_struct
{...}, so as to not conflict with documentation processing tools. Of course, C
has no problem with this.
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/b5ebc891-ee63-1638-0377-7b512d34b823@infradead.org
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dynamically allocate large local variable instead of putting it onto the
stack to avoid exceeding the stack size:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c: In function ‘amdgpu_amdkfd_unmap_hiq’:
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c:868:1: warning: the frame size of 1280 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307080505.V12qS0oz-lkp@intel.com
Suggested-by: Guchun Chen <guchun.chen@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The feature to save the dispatch ID in trap temporaries 6 & 7 on context
save is unconditionally enabled during MQD initialization.
Now that TTMPs are always setup regardless of debug mode for GC 9.4.3, we
should report that the dispatch ID is always available for debug/trap
handling.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced804 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMU13 overrides dynamic PCIe lane width and dynamic speed by when on
certain hosts. commit 38e4ced804 ("drm/amd/pm: conditionally disable
pcie lane switching for some sienna_cichlid SKUs") worked around this
issue by setting up certain SKUs to set up certain limits, but the same
fundamental problem with those hosts affects all SMU11 implmentations
as well, so align the SMU11 and SMU13 driver handling.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Soft lockup occurs when reading file 'trace_pipe':
watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488]
[...]
RIP: 0010:ring_buffer_empty_cpu+0xed/0x170
RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb
RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218
RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f
R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901
R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000
[...]
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__find_next_entry+0x1a8/0x4b0
? peek_next_entry+0x250/0x250
? down_write+0xa5/0x120
? down_write_killable+0x130/0x130
trace_find_next_entry_inc+0x3b/0x1d0
tracing_read_pipe+0x423/0xae0
? tracing_splice_read_pipe+0xcb0/0xcb0
vfs_read+0x16b/0x490
ksys_read+0x105/0x210
? __ia32_sys_pwrite64+0x200/0x200
? switch_fpu_return+0x108/0x220
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Through the vmcore, I found it's because in tracing_read_pipe(),
ring_buffer_empty_cpu() found some buffer is not empty but then it
cannot read anything due to "rb_num_of_entries() == 0" always true,
Then it infinitely loop the procedure due to user buffer not been
filled, see following code path:
tracing_read_pipe() {
... ...
waitagain:
tracing_wait_pipe() // 1. find non-empty buffer here
trace_find_next_entry_inc() // 2. loop here try to find an entry
__find_next_entry()
ring_buffer_empty_cpu(); // 3. find non-empty buffer
peek_next_entry() // 4. but peek always return NULL
ring_buffer_peek()
rb_buffer_peek()
rb_get_reader_page()
// 5. because rb_num_of_entries() == 0 always true here
// then return NULL
// 6. user buffer not been filled so goto 'waitgain'
// and eventually leads to an deadloop in kernel!!!
}
By some analyzing, I found that when resetting ringbuffer, the 'entries'
of its pages are not all cleared (see rb_reset_cpu()). Then when reducing
the ringbuffer, and if some reduced pages exist dirty 'entries' data, they
will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which
cause wrong 'overrun' count and eventually cause the deadloop issue.
To fix it, we need to clear every pages in rb_reset_cpu().
Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengyejian1@huawei.com
Cc: stable@vger.kernel.org
Fixes: a5fb833172 ("ring-buffer: Fix uninitialized read_stamp")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
So that SMU13.0.0 and SMU13.0.7 do not need to have one copy each.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
These are all tracing W=1 warnings in arm64 allmodconfig about missing
prototypes:
kernel/trace/trace_kprobe_selftest.c:7:5: error: no previous prototype for 'kprobe_trace_selftest_target' [-Werror=missing-pro
totypes]
kernel/trace/ftrace.c:329:5: error: no previous prototype for '__register_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:372:5: error: no previous prototype for '__unregister_ftrace_function' [-Werror=missing-prototypes]
kernel/trace/ftrace.c:4130:15: error: no previous prototype for 'arch_ftrace_match_adjust' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:243:15: error: no previous prototype for 'ftrace_return_to_handler' [-Werror=missing-prototypes]
kernel/trace/fgraph.c:358:6: error: no previous prototype for 'ftrace_graph_sleep_time_control' [-Werror=missing-prototypes]
arch/arm64/kernel/ftrace.c:460:6: error: no previous prototype for 'prepare_ftrace_return' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2172:5: error: no previous prototype for 'syscall_trace_enter' [-Werror=missing-prototypes]
arch/arm64/kernel/ptrace.c:2195:6: error: no previous prototype for 'syscall_trace_exit' [-Werror=missing-prototypes]
Move the declarations to an appropriate header where they can be seen
by the caller and callee, and make sure the headers are included where
needed.
Link: https://lore.kernel.org/linux-trace-kernel/20230517125215.930689-1-arnd@kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Florent Revest <revest@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
[ Fixed ftrace_return_to_handler() to handle CONFIG_HAVE_FUNCTION_GRAPH_RETVAL case ]
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The self tests for user_events currently does not ensure that the edge
case for struct types work properly with size differences.
Add cases for mis-matching struct names and sizes to ensure they work
properly.
Link: https://lkml.kernel.org/r/20230629235049.581-3-beaub@linux.microsoft.com
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Make IS_ERR() judge the debugfs_create_dir() function return.
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Instead of relying on free-form comments to document locking
requirements use well-known lockdep annotations.
These can also be validated at runtime make sure the invariants are not
violated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230704-thinkpad_acpi-lockdep-v1-2-60129548a738@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Report the legacy fallback behavior for uuid attributes just once
instead of logging repeated warnings for the same condition every time
the attribute is read. The old behavior is too spamy on the kernel logs.
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
hotkey_mask_set() and hotkey_mask_get() expect hotkey_mutex to be held.
While it should not matter during initialization a following patch will
enable lockdep for hotkey_mutex which would produce warnings here.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20230704-thinkpad_acpi-lockdep-v1-1-60129548a738@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Expose various CPU and dGPU tunables that are available on many ASUS
ROG laptops. The tunables shown in sysfs will vary depending on the CPU
and dGPU vendor.
All of these variables are write only and there is no easy way to find
what the defaults are. In general they seem to default to the max value
the vendor sets for the CPU and dGPU package - this is not the same as
the min/max writable value. Values written to these variables that are
beyond the capabilities of the CPU are ignored by the laptop.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230630053552.976579-9-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This helper is used for checking if the connected host supports
the feature, it can be moved into generic code to be used by other
smu implementations as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add session context buffer to decoder ring test for vcn v1 to v3.
v3 - correct the cmd for sesssion ctx buf
v2 - add the buffer into IB (Leo liu)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add session context buffer to decoder ring test.
v5 - clear the session ct buffer (Christian)
v4 - data type, explain change of ib size change (Christian)
v3 - indent and v2 changes correction. (Christian)
v2 - put the buffer at the end of the IB (Christian)
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.
The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.
Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.
This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX9.4.3, setup a reduced default CWSR grace period equal to
1000 cycles instead of 64000 cycles.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix five occurrences of the checkpatch.pl error:
ERROR: "(foo*)" should be "(foo *)"
Signed-off-by: Ran Sun <sunran001@208suo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
