PMFW use the left-shifted 16 bits argument to set the VCLK
DPM frequency for SMU v13.0.5.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Improvement on eDP
- PSR bug fixes
- SubVP bug fixes
- Improvements on pipe handling to address potential issues
- Freesync bug fix
- DPIA bug fix
- Fix multi-display issues
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The k1/k2 pixel rate dividers in dccg should only be updated on stream enable
and do not actually depend on whether odm combine is active.
This removes an on flip update of these and fixes the calculate function
to ignore odm status for dp steams.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert commit 5f3401eeb0 ("drm/amd/display: reallocate DET for dual displays with high pixel rate ratio")
[Why]
Previously had modified DET allocation algorithm to allocate less DET
segments for lower pixel rate display and more DET segments for higher
pixel rate display. But noticed it is causing underflow when higher
pixel rate display is not displaying at higher mode
[How]
Roll back change
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA doesn't support UHBR, driver should not enable UHBR
for dp tunneling
[How]
limit DPIA link rate to HBR3
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Peichen Huang <peichen.huang@amd.com>
Reviewed-by: Mustapha Ghaddar <Mustapha.Ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Missed color / CSC updates in fast update path
which caused Custom Color to break.
- Add color / CSC updates to new fast update path
to fix custom color
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Some EDIDs report a minimum refresh rate lower than what HW can support
How:
Add a check to calculate minimum supported refresh rate with current timing
and use that as the minimum if a lower one is passed in
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When iterating over all pipes in the loop, the CRB allocation algorithm
may potentially skip some of the pipes. Previously, the current pipe
index didn't get updated in this case, causing incorrect outcome.
[How]
Increment the pipe index when skipping over a pipe in the loop.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Artem Grishin <artem.grishin@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
PSR implementation in FW has inline polling which can poll for up
to 1ms. This will interfere with SubVP because SubVP is timing
sensitive and can't tolerate up to 1ms worth of delay before
handling vertical or VLINE interrupts. Therefore block SubVP + DRR
cases if DRR is PSR capable
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
We should not disable phantom pipes in this sequence, as this should be
controlled by FW. Furthermore, the previous programming sequence would
have enabled the phantom pipe in driver as well, causing corruption.
This change should avoid this from occuring.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-enable SubVP high refresh now that it is fixed
for displays with high refresh rates.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Bugs preventing DPP/HUBP power gating have been addressed
so this should be reenabled on dcn314 for sufficient
hardware rev versions
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- SubVP high refresh should only be enabled if all displays
are >= 120hz. We do not want to accidentally enables configs
such as 60hz[SubVP] + 120hz[SubVP]
- Ensure that the SubVP config generation code does not produce
configs such as 60hz[SubVP] + 120hz[SubVP]
- Also add admissibility checks to ensure these configs do not
pass as valid configs
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dmub_psr_get_state() return an invalid PSR state while disable
the PSR because convert_psr_state() doesn't recognize the state
that return from DMCUB.
[How]
Add a PSR state to make the dmub_psr_get_state() return a
correct PSR state.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.
[How]
Disable the PSR before adjusting timing parameters.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Any invalid mode from hw perspective should be given corresponding
error code, otherwise it leads to confusing warning message
"[drm] Mode Validation Warning: Validation OK failed validation."
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Why:
Log DP2 data to be used for debugging purposes
How:
Check the reported link rate of the DP connection and
translate it to the DP version.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] within dc_link_detect, edp edid is read only for the first time
and saved. edid will not be read after the first time read. to run edp
edid read test, need read edp edid for each dc_link_detect. dc->config
flag allow_edp_hotplug_detection could be used for edp edid test.
[How] add debugfs for dc->config.allow_edp_hotplug_detection
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] most edp support only timings from edid. applying
non-edid timings, especially those timings out of edp
bandwidth, may damage edp.
[How] do not add non-edid timings for edp.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit c105518679.
This patch disables the TOPDOWN flag for APU and few dGPU cards
which has the VRAM size equal to the BAR size.
When we enable the TOPDOWN flag, we get the free blocks at
the highest available memory region and we don't split the
lower order blocks. This change is required to keep off
the fragmentation related issues particularly in ASIC
which has VRAM space <= 500MiB
Hence, we are reverting this patch.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2270
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add these two dev attrs for xgmi info details which is helpful for
developers checking the xgmi topology by catting the sys file directly.
Take 4 cards with xgmi connection as an example, get the num_hops for each
device or node through xmig_hive_info dir like,
cat /sys/bus/pci/devices/0000:41:00.0/xgmi_hive_info/node1/num_hops
will return "00 41 41 41" where "00" stands for the hops to node1 itself
and "41" is the hops in hex format to every other node in the same hive.
There are node1/node2/node3/node4 representing 4 cards in the hive.
The same for num_links dev attr.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only vcn0 can process AV1 codecx. In order to use both vcn0 and
vcn1 in h264/265 transcode to AV1 cases, set vcn0 sched score to 1
at initialization time.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have a clean build with W=1 as of
commit c168feed5d ("drm/amd/display/amdgpu_dm/amdgpu_dm_helpers: Move
SYNAPTICS_DEVICE_ID into CONFIG_DRM_AMD_DC_DCN ifdef"). So, let's enable
these checks unconditionally for the entire module to catch these errors
during development.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following gcc with W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* EEPROM Table structure v1
drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c:98: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* EEPROM Table structrue v2.1
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why and How]
Add back debug bits enabling RCO for dcn314 as underflow
associated with this change has been resolved
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename mman.entity to mman.high_pr to make the distinction
clearer that this is a high priority scheduler. Similarly,
rename the recently added mman.delayed to mman.low_pr to
make it clear it is a low priority scheduler.
No functional change in this patch.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:48:22: warning: ‘SYNAPTICS_DEVICE_ID’ defined but not used [-Wunused-const-variable=]
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Hardware implements root clock gating by utilizing the DPP DTO registers
with a special case of DTO enabled, phase = 0, modulo = 1. This
conflicts with our policy to always update the DPPDTO for cases where
it's expected to be disabled.
The pipes unexpectedly enter a higher power state than expected because
of this programming flow.
[How]
Guard the upper layers of HWSS against this hardware quirk with
programming the register with an internal state flag in DCCG.
While technically acting as global state for the DCCG, HWSS shouldn't be
expected to understand the hardware quirk for having DTO disabled
causing more power than DTO enabled with this specific setting.
This also prevents sequencing errors from occuring in the future if
we have to program DPP DTO in multiple locations.
Acked-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The st,m95640 is a 64 Kbit SPI eeprom in the same family as the two
existing st,m95* compatibles.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230614201056.379080-1-linux@rasmusvillemoes.dk
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 36a87f371b ("leds: Add AW20xx driver") adds config LEDS_AW200XX
in drivers/leds/Kconfig, but then in drivers/leds/Makefile accidently
refers to CONFIG_LEDS_W200XX; note the missing A!
This typo makes it impossible to add the driver to a kernel build.
Fix this wrong config reference.
Fixes: 36a87f371b ("leds: Add AW20xx driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230609100233.4111-1-lukas.bulwahn@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Nullify stmfx->vdd in case devm_regulator_get_optional() returns an error.
And simplify code by returning an error only if return code is not -ENODEV,
which means there is no vdd regulator and it is not an issue.
Fixes: d75846ed08 ("mfd: stmfx: Fix dev_err_probe() call in stmfx_chip_init()")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230609092804.793100-2-amelie.delaunay@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
In error path, disable vdd regulator if it exists, but don't overload ret.
Because if regulator_disable() is successful, stmfx_chip_init will exit
successfully while chip init failed.
Fixes: 06252ade91 ("mfd: Add ST Multi-Function eXpander (STMFX) core driver")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20230609092804.793100-1-amelie.delaunay@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
Now spi_geni_grab_gpi_chan() errors are correctly reported, the
-EPROBE_DEFER error should be returned from probe in case the
GPI dma driver is built as module and/or not probed yet.
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Fixes: 6532582c35 ("spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230615-topic-sm8550-upstream-fix-spi-geni-qcom-probe-v2-1-670c3d9e8c9c@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We get a kernel crash about "list_add corruption. next->prev should be
prev (ffff9c801bc01210), but was ffff9c77b688237c.
(next=ffffae586d8afe68)."
crash> struct list_head 0xffff9c801bc01210
struct list_head {
next = 0xffffae586d8afe68,
prev = 0xffffae586d8afe68
}
crash> struct list_head 0xffff9c77b688237c
struct list_head {
next = 0x0,
prev = 0x0
}
crash> struct list_head 0xffffae586d8afe68
struct list_head struct: invalid kernel virtual address: ffffae586d8afe68 type: "gdb_readmem_callback"
Cannot access memory at address 0xffffae586d8afe68
[230469.019492] Call Trace:
[230469.032041] prepare_to_wait+0x8a/0xb0
[230469.044363] ? bch_btree_keys_free+0x6c/0xc0 [escache]
[230469.056533] mca_cannibalize_lock+0x72/0x90 [escache]
[230469.068788] mca_alloc+0x2ae/0x450 [escache]
[230469.080790] bch_btree_node_get+0x136/0x2d0 [escache]
[230469.092681] bch_btree_check_thread+0x1e1/0x260 [escache]
[230469.104382] ? finish_wait+0x80/0x80
[230469.115884] ? bch_btree_check_recurse+0x1a0/0x1a0 [escache]
[230469.127259] kthread+0x112/0x130
[230469.138448] ? kthread_flush_work_fn+0x10/0x10
[230469.149477] ret_from_fork+0x35/0x40
bch_btree_check_thread() and bch_dirty_init_thread() may call
mca_cannibalize() to cannibalize other cached btree nodes. Only one thread
can do it at a time, so the op of other threads will be added to the
btree_cache_wait list.
We must call finish_wait() to remove op from btree_cache_wait before free
it's memory address. Otherwise, the list will be damaged. Also should call
bch_cannibalize_unlock() to release the btree_cache_alloc_lock and wake_up
other waiters.
Fixes: 8e7102273f ("bcache: make bch_btree_check() to be multithreaded")
Fixes: b144e45fc5 ("bcache: make bch_sectors_dirty_init() to be multithreaded")
Cc: stable@vger.kernel.org
Signed-off-by: Mingzhe Zou <mingzhe.zou@easystack.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In some specific situations, the return value of __bch_btree_node_alloc
may be NULL. This may lead to a potential NULL pointer dereference in
caller function like a calling chain :
btree_split->bch_btree_node_alloc->__bch_btree_node_alloc.
Fix it by initializing the return value in __bch_btree_node_alloc.
Fixes: cafe563591 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to the previous fix of __bch_btree_node_alloc, the return value will
never be a NULL pointer. So IS_ERR is enough to handle the failure
situation. Fix it by replacing IS_ERR_OR_NULL check by an IS_ERR check.
Fixes: cafe563591 ("bcache: A block layer cache")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The cache_readaheads stat counter is not used anymore and should be
removed.
Signed-off-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Follow the advice of the Documentation/filesystems/sysfs.rst and show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20230615121223.22502-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Avoid trapping CTR_EL0 on systems with FEAT_EVT, as the register is
: commonly read by userspace
:
: - Make use of FEAT_BTI at hyp stage-1, setting the Guard Page bit to 1
: for executable mappings
:
: - Use a separate set of pointer authentication keys for the hypervisor
: when running in protected mode (i.e. pKVM)
:
: - Plug a few holes in timer initialization where KVM fails to free the
: timer IRQ(s)
KVM: arm64: Use different pointer authentication keys for pKVM
KVM: arm64: timers: Fix resource leaks in kvm_timer_hyp_init()
KVM: arm64: Use BTI for nvhe
KVM: arm64: Relax trapping of CTR_EL0 when FEAT_EVT is available
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Merge the mmc fixes for v6.4-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.5.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The feedback clock is used only for SDR104 & HS200 modes, and when
delay block is used (frequency is higher than 50 MHz). The tuning
procedure is then only required for those modes. Skip the procedure
for other modes.
The setting of this feedback clock is done just after enabling delay
block, and before configuring it.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/r/20230613150148.429828-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
* kvm-arm64/configurable-id-regs:
: Configurable ID register infrastructure, courtesy of Jing Zhang
:
: Create generalized infrastructure for allowing userspace to select the
: supported feature set for a VM, so long as the feature set is a subset
: of what hardware + KVM allows. This does not add any new features that
: are user-configurable, and instead focuses on the necessary refactoring
: to enable future work.
:
: As a consequence of the series, feature asymmetry is now deliberately
: disallowed for KVM. It is unlikely that VMMs ever configured VMs with
: asymmetry, nor does it align with the kernel's overall stance that
: features must be uniform across all cores in the system.
:
: Furthermore, KVM incorrectly advertised an IMP_DEF PMU to guests for
: some time. Migrations from affected kernels was supported by explicitly
: allowing such an ID register value from userspace, and forwarding that
: along to the guest. KVM now allows an IMP_DEF PMU version to be restored
: through the ID register interface, but reinterprets the user value as
: not implemented (0).
KVM: arm64: Rip out the vestiges of the 'old' ID register scheme
KVM: arm64: Handle ID register reads using the VM-wide values
KVM: arm64: Use generic sanitisation for ID_AA64PFR0_EL1
KVM: arm64: Use generic sanitisation for ID_(AA64)DFR0_EL1
KVM: arm64: Use arm64_ftr_bits to sanitise ID register writes
KVM: arm64: Save ID registers' sanitized value per guest
KVM: arm64: Reuse fields of sys_reg_desc for idreg
KVM: arm64: Rewrite IMPDEF PMU version as NI
KVM: arm64: Make vCPU feature flags consistent VM-wide
KVM: arm64: Relax invariance of KVM_ARM_VCPU_POWER_OFF
KVM: arm64: Separate out feature sanitisation and initialisation
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/hvhe:
: Support for running split-hypervisor w/VHE, courtesy of Marc Zyngier
:
: From the cover letter:
:
: KVM (on ARMv8.0) and pKVM (on all revisions of the architecture) use
: the split hypervisor model that makes the EL2 code more or less
: standalone. In the later case, we totally ignore the VHE mode and
: stick with the good old v8.0 EL2 setup.
:
: We introduce a new "mode" for KVM called hVHE, in reference to the
: nVHE mode, and indicating that only the hypervisor is using VHE.
KVM: arm64: Fix hVHE init on CPUs where HCR_EL2.E2H is not RES1
arm64: Allow arm64_sw.hvhe on command line
KVM: arm64: Force HCR_E2H in guest context when ARM64_KVM_HVHE is set
KVM: arm64: Program the timer traps with VHE layout in hVHE mode
KVM: arm64: Rework CPTR_EL2 programming for HVHE configuration
KVM: arm64: Adjust EL2 stage-1 leaf AP bits when ARM64_KVM_HVHE is set
KVM: arm64: Disable TTBR1_EL2 when using ARM64_KVM_HVHE
KVM: arm64: Force HCR_EL2.E2H when ARM64_KVM_HVHE is set
KVM: arm64: Key use of VHE instructions in nVHE code off ARM64_KVM_HVHE
KVM: arm64: Remove alternatives from sysreg accessors in VHE hypervisor context
arm64: Use CPACR_EL1 format to set CPTR_EL2 when E2H is set
arm64: Allow EL1 physical timer access when running VHE
arm64: Don't enable VHE for the kernel if OVERRIDE_HVHE is set
arm64: Add KVM_HVHE capability and has_hvhe() predicate
arm64: Turn kaslr_feature_override into a generic SW feature override
arm64: Prevent the use of is_kernel_in_hyp_mode() in hypervisor code
KVM: arm64: Drop is_kernel_in_hyp_mode() from __invalidate_icache_guest_page()
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/ffa-proxy:
: pKVM FF-A Proxy, courtesy Will Deacon and Andrew Walbran
:
: From the cover letter:
:
: pKVM's primary goal is to protect guest pages from a compromised host by
: enforcing access control restrictions using stage-2 page-tables. Sadly,
: this cannot prevent TrustZone from accessing non-secure memory, and a
: compromised host could, for example, perform a 'confused deputy' attack
: by asking TrustZone to use pages that have been donated to protected
: guests. This would effectively allow the host to have TrustZone
: exfiltrate guest secrets on its behalf, hence breaking the isolation
: that pKVM intends to provide.
:
: This series addresses this problem by providing pKVM with the ability to
: monitor SMCs following the Arm FF-A protocol. FF-A provides (among other
: things) a set of memory management APIs allowing the Normal World to
: share, donate or lend pages with Secure. By monitoring these SMCs, pKVM
: can ensure that the pages that are shared, lent or donated to Secure by
: the host kernel are only pages that it owns.
KVM: arm64: pkvm: Add support for fragmented FF-A descriptors
KVM: arm64: Handle FFA_FEATURES call from the host
KVM: arm64: Handle FFA_MEM_LEND calls from the host
KVM: arm64: Handle FFA_MEM_RECLAIM calls from the host
KVM: arm64: Handle FFA_MEM_SHARE calls from the host
KVM: arm64: Add FF-A helpers to share/unshare memory with secure world
KVM: arm64: Handle FFA_RXTX_MAP and FFA_RXTX_UNMAP calls from the host
KVM: arm64: Allocate pages for hypervisor FF-A mailboxes
KVM: arm64: Probe FF-A version and host/hyp partition ID during init
KVM: arm64: Block unsafe FF-A calls from the host
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
