There's no longer a need for the baggage of the old scheme for handling
configurable ID register fields. Rip it all out in favor of the
generalized infrastructure.
Link: https://lore.kernel.org/r/20230609190054.1542113-12-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Everything is in place now to use the generic ID register
infrastructure. Use the VM-wide values to service ID register reads.
The ID registers are invariant after the VM has started, so there is no
need for locking in that case. This is rather desirable for VM live
migration, as the needless lock contention could prolong the VM blackout
period.
Link: https://lore.kernel.org/r/20230609190054.1542113-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM allows userspace to write to the CSV2 and CSV3 fields of
ID_AA64PFR0_EL1 so long as it doesn't over-promise on the
Spectre/Meltdown mitigation state. Switch over to the new way of the
world for screening user writes. Leave the old plumbing in place until
we actually start handling ID register reads from the VM-wide values.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-10-oliver.upton@linux.dev
[Oliver: split from monster patch, added commit description]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
KVM allows userspace to specify a PMU version for the guest by writing
to the corresponding ID registers. Currently the validation of these
writes is done manuallly, but there's no reason we can't switch over to
the generic sanitisation infrastructure.
Start screening user writes through arm64_check_features() to prevent
userspace from over-promising in terms of vPMU support. Leave the old
masking in place for now, as we aren't completely ready to serve reads
from the VM-wide values.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-9-oliver.upton@linux.dev
[Oliver: split off from monster patch, cleaned up handling of NI vPMU
values, wrote commit description]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Rather than reinventing the wheel in KVM to do ID register sanitisation
we can rely on the work already done in the core kernel. Implement a
generalized sanitisation of ID registers based on the combination of the
arm64_ftr_bits definitions from the core kernel and (optionally) a set
of KVM-specific overrides.
This all amounts to absolutely nothing for now, but will be used in
subsequent changes to realize user-configurable ID registers.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-8-oliver.upton@linux.dev
[Oliver: split off from monster patch, rewrote commit description,
reworked RAZ handling, return EINVAL to userspace]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Create a uapi header include/uapi/linux/eventfd.h, move the associated
flags to the uapi header, and include it from linux/eventfd.h.
Suggested-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Eric Biggers <ebiggers@google.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_2B6A999A23E86E522D5D9859D54FFCF9AA05@qq.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Initialize the default ID register values upon the first call to
KVM_ARM_VCPU_INIT. The vCPU feature flags are finalized at that point,
so it is possible to determine the maximum feature set supported by a
particular VM configuration. Do nothing with these values for now, as we
need to rework the plumbing of what's already writable to be compatible
with the generic infrastructure.
Co-developed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20230609190054.1542113-7-oliver.upton@linux.dev
[Oliver: Hoist everything into KVM_ARM_VCPU_INIT time, so the features
are final]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The audio card uses loongson I2S controller present in
7axxx/2kxxx chips to transfer audio data.
On loongson platform, the chip has only one I2S controller.
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/20230614122659.3402788-1-mengyingkun@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Loongson ASoC Sound Card is a general ASoC DAI Link driver that
can be used for Loongson CPU DAI drivers and external CODECs.
The driver supports the use of ACPI table to describe device resources.
On loongson 7axxx platforms, the audio device is an ACPI device.
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/20230614122240.3402762-1-mengyingkun@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Added Analog Devices MAX98388 amplifier driver.
MAX98388 provides a PCM interface for audio data and a standard I2C
interface for control data communication.
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Link: https://lore.kernel.org/r/20230613060945.183128-2-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dt-bindings information for Analog Devices MAX98388 I2S Amplifier
Signed-off-by: Ryan Lee <ryans.lee@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230613060945.183128-1-ryan.lee.analog@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Loongson I2S controller is found on 7axxx/2kxxx chips from loongson,
it is a PCI device with two private DMA controllers, one for playback,
the other for capture.
The driver supports the use of DTS or ACPI to describe device resources.
Signed-off-by: Yingkun Meng <mengyingkun@loongson.cn>
Link: https://lore.kernel.org/r/20230615122718.3412942-1-mengyingkun@loongson.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Mark Brown <broonie@kernel.org>:
The RealTek SoundWire CODECs don't support bulk register operations so
they gain no advantage from using the rbtree cache, convert them to use
the maple tree cache instead - it is more modern.
Add new test case which checks that timestamp updates on actual terminal
character device (e.g. /dev/pts/0) happen even if the terminal is
accessed via magic /dev/tty file.
Signed-off-by: Michal Sekletar <msekleta@redhat.com>
Message-ID: <20230613172107.78138-2-msekleta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User space applications watch for timestamp changes on character device
files in order to determine idle time of a given terminal session. For
example, "w" program uses this information to populate the IDLE column
of its output [1]. Similarly, systemd-logind has optional feature where
it uses atime of the tty character device to determine if there was
activity on the terminal associated with the logind's session object. If
there was no activity for a configured period of time then logind will
terminate such session [2].
Now, usually (e.g. bash running on the terminal) the use of the terminal
will update timestamps (atime and mtime) on the corresponding terminal
character device. However, if access to the terminal, e.g. /dev/pts/0,
is performed through magic character device /dev/tty then such access
obviously changes the state of the terminal, however timestamps on the
device that correspond to the terminal (/dev/pts/0) are not updated.
This patch makes sure that we update timestamps on *all* character
devices that correspond to the given tty, because outside observers (w,
systemd-logind) are maybe checking these timestamps. Obviously, they can
not check timestamps on /dev/tty as that has per-process meaning.
[1] https://gitlab.com/procps-ng/procps/-/blob/v4.0.0/w.c#L286
[2] https://github.com/systemd/systemd/blob/v252/NEWS#L477
Signed-off-by: Michal Sekletar <msekleta@redhat.com>
Message-ID: <20230613172107.78138-1-msekleta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-3-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwicap_drv_remove() is only called for a device after hwicap_drv_probe()
returned 0. In that case dev_set_drvdata() was called (by hwicap_setup())
with a non-NULL value and so dev_get_drvdata() won't return NULL.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-2-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hwicap_remove() is only called by hwicap_drv_remove(). Simplify by
unrolling the former into the latter function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Message-ID: <20230605092047.50472-1-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A process can spawn a PD on DSP with some attributes that can be
associated with the PD during spawn and run. The invocation
corresponding to the create request with attributes has total
4 buffers at the DSP side implementation. If this number is not
correct, the invocation is expected to fail on DSP. Added change
to use correct number of buffer count for creating fastrpc scalar.
Fixes: d73f71c7c6 ("misc: fastrpc: Add support for create remote init process")
Cc: stable <stable@kernel.org>
Tested-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Message-ID: <1686743685-21715-1-git-send-email-quic_ekangupt@quicinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
svc_create_memory_pool() is only called from stratix10_svc_drv_probe().
Most of resources in the probe are managed, but not this memremap() call.
There is also no memunmap() call in the file.
So switch to devm_memremap() to avoid a resource leak.
Cc: stable@vger.kernel.org
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Link: https://lore.kernel.org/all/783e9dfbba34e28505c9efa8bba41f97fd0fa1dc.1686109400.git.christophe.jaillet@wanadoo.fr/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Message-ID: <20230613211521.16366-1-dinguyen@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is reasonable to declare multiple nvmem blocks. Unless a unique 'id'
is passed in for each block there may be name clashes.
Avoid this by using the magic token NVMEM_DEVID_AUTO.
Fixes: 5a3fa75a4d ("nvmem: Add driver to expose reserved memory as nvmem")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-6-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a couple of situations like
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOSPC;
the error is not actually "No space left on device", but "Out of memory".
It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.
The semantically correct should be:
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOMEM;
Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: c92316bf8e ("test_firmware: add batched firmware tests")
Fixes: 0a8adf5847 ("test: add firmware_class loader test")
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Fixes: eb910947c8 ("test: firmware_class: add asynchronous request trigger")
Fixes: 061132d2b9 ("test_firmware: add test custom fallback trigger")
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
commit 03c835f498 ("i2c: Switch .probe() to not take an id parameter")
convert back to (the new) .probe() to be able to eventually drop
.probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Peter Rosin <peda@axentia.se>
Message-ID: <20230611204737.828617-1-u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds support for the "fixed-layout" NVMEM layout binding. It allows
defining NVMEM cells in a layout DT node named "nvmem-layout".
While NVMEM subsystem supports layout drivers it has been discussed that
"fixed-layout" may actually be supperted internally. It's because:
1. It's a very basic layout
2. It allows sharing code with legacy syntax parsing
3. It's safer for soc_device_match() due to -EPROBE_DEFER
4. This will make the syntax transition easier
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-26-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With support for the "fixed-layout" binding it's possible and preferred
now to define fixed NVMEM cells in the layout node. Do that for the
example binding.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-25-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the introduction of NVMEM layouts, new NVMEM content structures
should be defined as such. We should also try to convert / migrate
existing NVMEM content bindings to layouts.
This commit handles fixed NVMEM cells. So far they had to be defined
directly - as device subnodes. With this change it's allowed to put them
in the DT node named "nvmem-layout".
Having NVMEM cells in separated node is preferred as it draws a nice
line between NVMEM device and its content. It results in cleaner
bindings.
FWIW a very similar situation has happened to MTD devices and their
partitions: see commit 5d96ea42eb ("dt-bindings: mtd: Clarify all
partition subnodes").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-24-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add i.MX93 OCOTP support. i.MX93 OCOTP has two parts: Fuse shadow
block(fsb) and fuse managed by ELE. The FSB part could be directly
accessed with MMIO, the ELE could only be accessed with ELE API.
Currently the ELE API is not ready, so NULL function callback is used,
but it was tested with downstream ELE API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-22-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
@xilinx.com is still working but better to switch to new amd.com after
AMD/Xilinx acquisition.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-20-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the OTP memory device found on the Rockchip RK3588 SoC.
While here, remove the unnecessary 'void *' casts in the OF device ID
table.
Co-developed-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-14-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enhance error handling in the probe function by making use of
dev_err_probe(), which ensures the error code is always printed, in
addition to the specified error message.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-13-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to support new Rockchip OTP memory devices having
specific reset configurations, switch devm_reset_control_get() to
devm_reset_control_array_get_exclusive().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-12-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to support additional Rockchip OTP memory devices with
different register layout, generalize rockchip_otp_wait_status() to
accept a new parameter for specifying the offset of the status register.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-11-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to support new Rockchip OTP memory devices with different
clock configurations and register layout, extend rockchip_data struct
with the related members: clks, num_clks, reg_read.
Additionally, to avoid managing redundant driver data, drop num_clks
member from rockchip_otp struct and update all references to point to
the equivalent member in rockchip_data.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Tested-by: Vincent Legoll <vincent.legoll@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-10-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the OTP memory found on Rockchip RK3588 SoC.
Since RK3588 uses different clocks & resets configurations than PX30 /
RK3308, provide the required changes in the binding to be able to handle
both variants.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-9-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On RPi4 the bootloader[1] will copy the binary public key blob
(if present) into memory location specified by this node, for
use by the OS.
[1] https://www.raspberrypi.com/documentation/computers/configuration.html#nvmem-nodes
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-7-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Parse ASCII MAC format into byte based
2. Calculate relative addresses based on index argument
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-5-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Broadcom's NVRAM contains MACs for Ethernet interfaces. Those MACs are
usually base addresses that are also used for calculating other MACs.
For example if a router vendor decided to use gmac0 it most likely
programmed NVRAM of each unit with a proper "et0macaddr" value. That is
a base.
Ethernet interface is usually connected to switch port. Switch usually
includes few LAN ports and a WAN port. MAC of WAN port gets calculated
as relative address to the interface one. Offset varies depending on
device model.
Wireless MACs may also need to be calculated using relevant offsets.
To support all those scenarios let MAC NVMEM cells be referenced with an
index specifying MAC offset. Disallow additionalProperties while at it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-4-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Not just i.MX8M, but all i.MX6/7 (and subtypes) need to reverse the
MAC address read from fuses. Exceptions are i.MX6SLL and i.MX7ULP which
do not support ethernet at all.
Fixes: d0221a780c ("nvmem: imx-ocotp: add support for post processing")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com> # imx6q
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-3-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
