smatch reports
drivers/nvmem/imx-ocotp.c:599:21: warning: symbol
'imx_ocotp_layout' was not declared. Should it be static?
This variable is only used in one file so should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Message-ID: <20230611140330.154222-2-srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch reports:
drivers/nvmem/sunplus-ocotp.c:205 sp_ocotp_probe()
warn: 'otp->clk' from clk_prepare() not released on lines: 196.
In the function sp_ocotp_probe(struct platform_device *pdev), otp->clk may
not be released before return.
To fix this issue, using function clk_unprepare() to release otp->clk.
Fixes: 8747ec2e97 ("nvmem: Add driver for OCOTP in Sunplus SP7021")
Signed-off-by: Yi Yingao <m202271736@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Message-ID: <20230509085237.5917-1-m202271736@hust.edu.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The devices on cdx could be bound to drivers with the device
DMA managed by kernel drivers or user-space applications.
As multiple devices can be placed in the same IOMMU group, the
DMA on these devices must either be entirely under kernel control
or userspace control. Fix the CDX bus driver to acknowlege the
driver_managed_dma flag and call the appropriate iommu APIs.
Fixes: 2959ab2470 ("cdx: add the cdx bus driver")
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/lkml/20230524134831.28dc97e2.alex.williamson@redhat.com/
Reviewed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Message-ID: <20230605131009.6869-1-nipun.gupta@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds an example showing how to use PFSM devices
from a userspace application. The PMIC is armed to be triggered
by a RTC alarm to execute state transition.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Message-ID: <20230511095126.105104-7-jpanis@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds documentation for the TPS6594 PFSM driver.
The PFSM controls the operational states of the TPS6594 PMIC.
Depending on the operational mode, some power domain networks
remain energized while others can be off.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Message-ID: <20230511095126.105104-6-jpanis@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This PFSM controls the operational modes of the PMIC:
- STANDBY and LP_STANDBY,
- ACTIVE state,
- MCU_ONLY state,
- RETENTION state, with or without DDR and/or GPIO retention.
Depending on the current operational mode, some voltage domains
remain energized while others can be off.
This PFSM is also used to trigger a firmware update, and provides
R/W access to device registers.
See Documentation/misc-devices/tps6594-pfsm.rst for more
information.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Message-ID: <20230511095126.105104-5-jpanis@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds support for TPS6594 ESM (Error Signal Monitor).
This device monitors the SoC error output signal at its nERR_SOC input pin.
In error condition, ESM toggles its nRSTOUT_SOC pin to reset the SoC.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Message-ID: <20230511095126.105104-4-jpanis@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap(), same as in
ath11k_qmi_load_file_target_mem().
Fixes: 6ac04bdc5e ("ath11k: Use reserved host DDR addresses from DT for PCI devices")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230608022858.27405-1-jiasheng@iscas.ac.cn
-----BEGIN PGP SIGNATURE-----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=XohL
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-tps6594-core-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into char-misc-next
Immutable branch containing TPS6594 core (MFD) support due for the v6.5 merge window
We want this due to patches requiring this mfd support.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'ib-mfd-tps6594-core-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: tps6594: Add driver for TI TPS6594 PMIC
Most sysfs attributes are statically defined, the goal with this design
being to be able to move all the filesystem description into read-only
memory. Anyway, it may be relevant in some cases to populate attributes
at run time. This leads to situation where an attribute may or may not be
present depending on conditions which are not known at compile
time, up to the point where no attribute at all gets added in a folder
which then becomes "sometimes" empty. Problem is, providing an attribute
group with a name and without .[bin_]attrs members will be loudly
refused by the core, leading in most cases to a device registration
failure.
The simple way to support such situation right now is to dynamically
allocate an empty attribute array, which is:
* a (small) waste of space
* a waste of time
* disturbing, to say the least, as an empty sysfs folder will be created
anyway.
Another (even worse) possibility would be to dynamically overwrite a
member of the attribute_group list, hopefully the last, which is also
supposed to remain in the read-only section.
In order to avoid these hackish situations, while still giving a little
bit of flexibility, we might just check the validity of the .[bin_]attrs
list and, if empty, just skip the attribute group creation instead of
failing. This way, developers will not be tempted to workaround the
core with useless allocations or strange writes on supposedly read-only
structures.
The content of the WARN() message is kept but turned into a debug
message in order to help developers understanding why their sysfs
folders might now silently fail to be created.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <20230614063018.2419043-3-miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The purpose of the if/else block is to select the right sysfs directory
entry to be used for the files creation. At a first look when you have
the file in front of you, it really seems like the "create_files()"
lines right after the block are badly indented and the "else" does not
guard. In practice the code is correct but lacks curly brackets to show
where the big if/else block actually ends. Add these brackets to comply
with the current kernel coding style and to ease the understanding of
the whole logic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Message-ID: <20230614063018.2419043-2-miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fwnode_irq_get() and the fwnode_irq_get_byname() return 0 upon
device-tree IRQ mapping failure. This is contradicting the
fwnode_irq_get_byname() function documentation and can potentially be a
source of errors like:
int probe(...) {
...
irq = fwnode_irq_get_byname();
if (irq <= 0)
return irq;
...
}
Here we do correctly check the return value from fwnode_irq_get_byname()
but the driver probe will now return success. (There was already one
such user in-tree).
Change the fwnode_irq_get_byname() to work as documented and make also the
fwnode_irq_get() follow same common convention returning a negative errno
upon failure.
Fixes: ca0acb511c ("device property: Add fwnode_irq_get_byname")
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-ID: <3e64fe592dc99e27ef9a0b247fc49fa26b6b8a58.1685340157.git.mazziesaccount@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"mutex_unlock(&ar->conf_mutex);" is always called at end of function
ath12k_mac_op_unassign_vif_chanctx(), so delete this unlock to make
sure lock/unlock is paired.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230608104444.3134-1-quic_wgong@quicinc.com
With the help of a new device_is_compatible() make
the driver code agnostic to the OF/ACPI. This makes
it neater. As a side effect the header inclusions is
corrected (seems mod_devicetable.h was implicitly
included).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Message-ID: <20230609154900.43024-4-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some users want to use the struct device pointer to see if the
device is compatible in terms of Open Firmware specifications,
i.e. if it has a 'compatible' property and it matches to the
given value. Provide inline helper for the users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Message-ID: <20230609154900.43024-3-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The data type of struct acpi_device_id is defined in the
mod_devicetable.h. It's suboptimal to require user with
the almost agnostic code to include acpi.h solely for the
macro that affects the data type defined elsewhere.
Taking into account the above and for the sake of consistency
move ACPI_DEVICE_CLASS() to mod_devicetable.h.
Note, that with CONFIG_ACPI=n the ID table will be filed with data
but it does not really matter because either it won't be used, or
won't be compiled in some cases (when guarded by respective ifdeffery).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Message-ID: <20230609154900.43024-2-andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bootrom burned into the MT7986 SoC will try multiple locations on
the SPI-NAND flash to load bl2 in case the bl2 image located at the the
previously attempted offset is corrupt.
Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
allowing for up to four redundant copies of bl2 (typically sized a
bit less than 0x40000).
Fixes: 8e01fb15b8 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the GPU's OPP table. This is from the downstream ChromeOS kernel,
adapted to the new upstream opp-supported-hw binning format. Also add
dynamic-power-coefficient for the GPU.
Also add label for mfg1 power domain. This is to be used at the board
level to add a regulator supply for the power domain.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230609072906.2784594-5-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
On the MT8186, the chip is binned for different GPU voltages at the
highest OPPs. The binning value is stored in the efuse.
Add the NVMEM cell, and tie it to the GPU.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230609072906.2784594-4-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
This adds clocks, dynamic power coefficients, and OPP tables for the CPU
cores, so that everything required at the SoC level for CPU freqency and
voltage scaling is available.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230609072906.2784594-3-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add a device node for the CCI (cache coherent interconnect) and an OPP
table for it. The OPP table was taken from the downstream ChromeOS
kernel.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230609072906.2784594-2-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add pwm-fan and cooling-maps to BananaPi-R3 devicetree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230530201235.22330-5-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add thermal-zones to mt7986 devicetree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230530201235.22330-4-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add thermal related nodes to mt7986 devicetree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230530201235.22330-3-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The capacity-dmips-mhz parameter was miscalculated: this SoC runs
the first (Cortex-A55) cluster at a maximum of 2000MHz and the
second (Cortex-A76) cluster at a maximum of 2200MHz.
In order to calculate the right capacity-dmips-mhz, the following
test was performed:
1. CPUFREQ governor was set to 'performance' on both clusters
2. Ran dhrystone with 500000000 iterations for 10 times on each cluster
3. Calculated the mean result for each cluster
4. Calculated DMIPS/MHz: dmips_mhz = dmips_per_second / cpu_mhz
5. Scaled results to 1024:
result_c0 = dmips_mhz_c0 / dmips_mhz_c1 * 1024
The mean results for this SoC are:
Cluster 0 (LITTLE): 12016411 Dhry/s
Cluster 1 (BIG): 31702034 Dhry/s
The calculated scaled results are:
Cluster 0: 426.953226899238 (rounded to 427)
Cluster 1: 1024
Fixes: 48489980e2 ("arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230602183515.3778780-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
In the series "Adjust the dma-ranges for MTK IOMMU", the mtk-iommu
driver was adapted to separate the iova range based on the larb used,
and a dma-ranges property was added to the soc node in the devicetree of
the affected SoCs allowing the whole 16GB iova range to be used. Except
that for mt8192, there was no patch adding dma-ranges.
Add the missing dma-ranges property to the soc node like was done for
mt8195 and mt8186. This fixes the usage of the vcodec, which would
otherwise trigger iommu faults.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230601203221.3675915-1-nfraprado@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add video-codec lat and core nodes for mt8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230303013842.23259-4-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add the cpufreq nodes for MT8192 SoC.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230317061944.15434-1-allen-kh.cheng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Currently a specific panel number is used in the Elm DTSI, which is
corresponded to a 12" panel. However, according to the official Chrome
OS devices document, Elm refers to Acer Chromebook R13, which, as the
name specifies, uses a 13.3" panel, which comes with EDID information.
As the kernel currently prioritizes the hardcoded timing parameters
matched with the panel number compatible, a wrong timing will be applied
to the 13.3" panel on Acer Chromebook R13, which leads to blank display.
Because the Elm DTSI is shared with Hana board, and Hana corresponds to
multiple devices from 11" to 14", a certain panel model number shouldn't
be present, and driving the panel according to its EDID information is
necessary.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230526100801.16310-1-uwu@icenowy.me
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
To store uncompressed bl2 more space is required than partition is
actually defined.
There is currently no known usage of this reserved partition.
Openwrt uses same partition layout.
We added same change to u-boot with commit d7bb1099 [1].
[1] d7bb109900
Cc: stable@vger.kernel.org
Fixes: 8e01fb15b8 ("arm64: dts: mt7986: add Bananapi R3")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add "regulator-boot-on" to "panel_fixed_3v3" to save time on powering
the regulator during boot. Also add "off-on-delay-us" to the node to
make sure the regulator never violates the panel timing requirements.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230417123956.926266-1-treapking@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
STM32F4 and STM32F7 can't switch to spi device mode.
Forbid this property with compatible "st,stm32f4-spi".
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-4-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for stm32h7 to use SPI controller in device role.
In such case, the spi instance should have the spi-slave property
defined.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-5-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid usage of deprecated dmaengine_terminate_all and use
dmaengine_terminate_sync and dmaengine_terminate_async instead.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-3-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Preparing introduction of SPI device, rename the spi_master structure
into spi_controller. This doesn't have any functional impact since
spi_master was already a macro for spi_controller.
Referring now to ctrl instead of master since the spi_controller
structure might not be used as a master controller only.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20230615075815.310261-2-valentin.caron@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple_dai_props has cpus/codecs/platforms. These pointer were used
for dai_link before, but are allocated today since
commit 050c7950fd ("ASoC: simple-card-utils: alloc dai_link
information for CPU/Codec/Platform").
We don't need to keep it anymore. This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkhhxpc6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSNN83d4NIlKPjon7a1SFbKvhIjKwUCZIihZQAKCRC1SFbKvhIj
K1wZAQCnujwsCYExil8fCHgdXufA+KsC5J4Clay7CLq5KmUdgwD+P9EJ5Hd37OeO
tAV6Pt4yEmQQBfXQgMdD2lk1yf0iGg8=
=r3E4
-----END PGP SIGNATURE-----
Merge tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter into char-misc-next
William writes:
First set of Counter updates for the 6.5 cycle
Biggest changes in this set include the introduction of a new Intel 8254
interface library module and the refactoring of the existing 104-quad-8
modules to migrate it to the regmap API. Some other minor cleanups
touching tools/counter and stm32-timer-cnt are also present.
Changes
* 104-quad-8
- Remove reference in Kconfig to 25-bit counter value
- Utilize bitfield access macros
- Refactor to buffer states for CMR, IOR, and IDR
- Utilize helper functions to handle PR, FLAG and PSC
- Migrate to the regmap API
* i8254
- Introduce the Intel 8254 interface library module
* stm32-timer-cnt
- Reset TIM_TISEL to its default value in probe
* tools/counter
- Add .gitignore
- Remove lingering 'include' directories on make clean
* tag 'counter-updates-for-6.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: i8254: Introduce the Intel 8254 interface library module
counter: 104-quad-8: Migrate to the regmap API
counter: 104-quad-8: Utilize helper functions to handle PR, FLAG and PSC
counter: 104-quad-8: Refactor to buffer states for CMR, IOR, and IDR
counter: 104-quad-8: Utilize bitfield access macros
tools/counter: Makefile: Remove lingering 'include' directories on make clean
tools/counter: Add .gitignore
counter: stm32-timer-cnt: Reset TIM_TISEL to its default value in probe
counter: 104-quad-8: Remove reference in Kconfig to 25-bit counter value
DFL:
- Krzysztof's change constifies pointers to hwmon_channel_info
Xilinx:
- Alfonso's change ensures proper reprograming (xCAP) interface switch
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCZIdJSRMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzaBswA/A+f5Z/kkZ+KD+kL4ysOb/pGwWno3lSm
AdFxwWv9cfgcAP0UWKNoYxgequpei/wQOp48r3IxSPXureQxxXs92uCeDA==
=dLy3
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.5-rc1
DFL:
- Krzysztof's change constifies pointers to hwmon_channel_info
Xilinx:
- Alfonso's change ensures proper reprograming (xCAP) interface switch
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: zynq-fpga: Ensure proper xCAP interface switch
fpga: dfl-fme: constify pointers to hwmon_channel_info
New device support
- honeywell,mprls0025pa
* New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
* Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
* Add support for mlx90615 Infra Red Thermometer after driver cleanup
and refactoring to support the differences in this device.
- renesas,x9250
* New driver and bindings for this quad potentiometer.
- rockchip,saradc
* Add support for RK3588. Also included is a bunch of refactoring and
cleanup for that driver.
- rohm,bu27008
* New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
* ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
* New driver and bindings for this ambient light sensor.
Features
- core
* Introduce iio_validate_own_trigger() for cases where a driver can only
consumer a trigger it registered (detected via same parent device).
Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
* ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
* Enable asynchronous probe.
- rohm,bu27034
* Enable asynchronous probe.
- ti,tmp006
* Explicit support for DT including binding documentation.
Cleanups, minor fixes and misc improvements.
- treewide
* Switch I2C drivers from probe_new() back to probe() - part of the
long process of getting rid of a parameter from probe()
* Various whitespace and typo fixes not otherwise called out.
- core
* industrialio-buffer,Style cleanup.
* Add documentation to extend_name field of struct iio_chan_spec to
direct people using it towards the label infrastructure instead.
extend_name was a design mistake a long time back so directly people
away from it may be useful.
- adi,ad7606
* Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
* Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
* Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
* Add DT binding for this part.
- qcom,spmi-vadc
* Allow for 1/16th prescaling used on a few devices.
* Various changes to channel labeling and naming, including dropping
use of fwnode_name which generates odd channel names. Small ABI
change as a result, but not thought to be a problem for users of this
platform.
- st,lsm6dsx
* dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
* Add a debug print for when legacy channel config is used.
- ti,palmas-adc
* Drop unused i2c.h include.
-----BEGIN PGP SIGNATURE-----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=0gJ9
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
1st set of IIO new device support, features and cleanup for the 6.5 cycle.
New device support
- honeywell,mprls0025pa
* New driver and dt-bindings for this series of pressure sensors.
- invensense,mpu6050
* Add support for ICM 20600 IMU (ID, bindings and device data).
- melexis,mlx90614
* Add support for mlx90615 Infra Red Thermometer after driver cleanup
and refactoring to support the differences in this device.
- renesas,x9250
* New driver and bindings for this quad potentiometer.
- rockchip,saradc
* Add support for RK3588. Also included is a bunch of refactoring and
cleanup for that driver.
- rohm,bu27008
* New driver bindings etc for this 5 photodiode color sensor.
- st,lsm9ds0/st,st-sensors
* ID added for LSM303D accelerometer and magnetometer including ACPI binding.
- ti,opt4001
* New driver and bindings for this ambient light sensor.
Features
- core
* Introduce iio_validate_own_trigger() for cases where a driver can only
consumer a trigger it registered (detected via same parent device).
Use it in the kionix,kx022a driver and new rohm,by27008 driver.
- dynaimage,al3320a
* ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices.
- kionix,kx002a
* Enable asynchronous probe.
- rohm,bu27034
* Enable asynchronous probe.
- ti,tmp006
* Explicit support for DT including binding documentation.
Cleanups, minor fixes and misc improvements.
- treewide
* Switch I2C drivers from probe_new() back to probe() - part of the
long process of getting rid of a parameter from probe()
* Various whitespace and typo fixes not otherwise called out.
- core
* industrialio-buffer,Style cleanup.
* Add documentation to extend_name field of struct iio_chan_spec to
direct people using it towards the label infrastructure instead.
extend_name was a design mistake a long time back so directly people
away from it may be useful.
- adi,ad7606
* Add HAS_IOPORT dependency to prepare for some Kconfig changes.
- bosch,bma400
* Drop pointless print of ret in a dev_err_probe() message.
- invensense,icm42600
* Rework timestamp handling to reduce jitter.
- mediatek,mt7986-auxdac
* Add DT binding for this part.
- qcom,spmi-vadc
* Allow for 1/16th prescaling used on a few devices.
* Various changes to channel labeling and naming, including dropping
use of fwnode_name which generates odd channel names. Small ABI
change as a result, but not thought to be a problem for users of this
platform.
- st,lsm6dsx
* dt-binding: Use common schema for mount-matrix via a reference.
- st,stm32
* Add a debug print for when legacy channel config is used.
- ti,palmas-adc
* Drop unused i2c.h include.
* tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits)
dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning
dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/
dt-bindings: iio: adc: Add rockchip,rk3588-saradc string
iio: adc: rockchip_saradc: Use dev_err_probe
iio: adc: rockchip_saradc: Match alignment with open parenthesis
iio: adc: rockchip_saradc: Use of_device_get_match_data
iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled
iio: adc: rockchip_saradc: Add support for RK3588
iio: adc: rockchip_saradc: Add callback functions
iio: temperature: tmp006: Add OF device matching support
dt-bindings: iio: temperature: Add support for tmp006
staging: iio: Switch i2c drivers back to use .probe()
iio: amplifiers: ad8366 Fix whitespace issue
iio: imu: inv_icm42600: avoid frequent timestamp jitter
MAINTAINERS: Add ROHM BU27008
iio: light: ROHM BU27008 color sensor
iio: kx022a: Use new iio_validate_own_trigger()
iio: trigger: Add simple trigger_validation helper
dt-bindings: iio: light: ROHM BU27008
iio: mlx90614: Add MLX90615 support
...
Given how late this pull request is, I'm expecting these to get queued
up for the 6.5 merge window.
- adi,ad7192
* Fix a null pointer as spi_set_drvdata() is no longer called.
* Fix wrong check prior to using internal clock.
* Fix dt-binding to make it clear the voltage reference is required.
- adi,ad74413
* DIN_SINK should not be set for functions other than digital inputs.
Enforce that in the driver.
- amlogic,meson-saradc
* Fix clock divider mask length - affects only meson 8 family.
- freescale,fxls8962af
* Fix endian type and shift of channels to match with default device setup.
* Narrow errata handling to FXLS8962AF only as doesn't affect other devices
supported by this driver.
-----BEGIN PGP SIGNATURE-----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=QmKH
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
2nd set of IIO fixes for the 6.4 cycle.
Given how late this pull request is, I'm expecting these to get queued
up for the 6.5 merge window.
- adi,ad7192
* Fix a null pointer as spi_set_drvdata() is no longer called.
* Fix wrong check prior to using internal clock.
* Fix dt-binding to make it clear the voltage reference is required.
- adi,ad74413
* DIN_SINK should not be set for functions other than digital inputs.
Enforce that in the driver.
- amlogic,meson-saradc
* Fix clock divider mask length - affects only meson 8 family.
- freescale,fxls8962af
* Fix endian type and shift of channels to match with default device setup.
* Narrow errata handling to FXLS8962AF only as doesn't affect other devices
supported by this driver.
* tag 'iio-fixes-for-6.4b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
meson saradc: fix clock divider mask length
iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF
iio: accel: fxls8962af: fixup buffer scan element type
dt-bindings: iio: ad7192: Add mandatory reference voltage source
iio: adc: ad7192: Fix internal/external clock selection
iio: adc: ad7192: Fix null ad7192_state pointer access
iio: addac: ad74413: don't set DIN_SINK for functions other than digital input
Use ieee80211_channel_to_freq_khz() to calculate channel to frequency to
omit proprietary code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Message-ID: <c3a94a403d04ba810cffff8afa734a94a218a4e9.1686166624.git.philipp.g.hortmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use ieee80211_freq_khz_to_channel() to calculate frequency to channel to
omit proprietary code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Message-ID: <fc332e81f6677965e9e51f1fcef9815997effcb5.1686166624.git.philipp.g.hortmann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The qca8k_cled_hw_control_get() function which implements ->hw_control_get
sets the appropriate bits but does not clear them. This leads to an
uninitialized variable bug. Fix this by setting mode to zero at the
start.
Fixes: e0256648c8 ("net: dsa: qca8k: implement hw_control ops")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add cfg80211 and remove defined variables rfc1042_header and
bridge_tunnel_header as they are then already defined. Usage of cfg80211
is required to merge driver into wireless subsystem.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Message-ID: <20230603085251.GA20230@matrix-ESPRIMO-P710>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removed new line in else and else if,
this warning was given by checkpatch.pl
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230530135120.37637-1-kartikey406@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The inability to include the uAPI headers directly in tools/
is one of the bigger annoyances of compiling user space code.
Most projects trade the pain for smaller inconvenience of having
to copy the headers under tools/include.
In case of netlink headers I think that we can avoid both.
Netlink family headers are simple and should be self-contained.
We can try to twiddle the Makefile a little to force-include
just the family header, and use system headers for the rest.
This works fairly well. There are two warts - for some reason
if we specify -include $path/family.h as a compilation flag,
the #ifdef header guard does not seem to work. So we need
to throw the guard in on the command line as well. Seems like
GCC detects that the header is different and tries to include
both. Second problem is that make wants hash sign to be escaped
or not depending on the version. Sigh.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
