[ Upstream commit b18fc0ab83 ]
Invalidating a dmabuf will impact other users of the shared BO.
In the scenario where process A moves the BO, it needs to inform
process B about the move and process B will need to update its
page table.
The commit fixes a synchronisation bug caused by the use of the
ticket: it made amdgpu_vm_handle_moved behave as if updating
the page table immediately was correct but in this case it's not.
An example is the following scenario, with 2 GPUs and glxgears
running on GPU0 and Xorg running on GPU1, on a system where P2P
PCI isn't supported:
glxgears:
export linear buffer from GPU0 and import using GPU1
submit frame rendering to GPU0
submit tiled->linear blit
Xorg:
copy of linear buffer
The sequence of jobs would be:
drm_sched_job_run # GPU0, frame rendering
drm_sched_job_queue # GPU0, blit
drm_sched_job_done # GPU0, frame rendering
drm_sched_job_run # GPU0, blit
move linear buffer for GPU1 access #
amdgpu_dma_buf_move_notify -> update pt # GPU0
It this point the blit job on GPU0 is still running and would
likely produce a page fault.
Cc: stable@vger.kernel.org
Fixes: a448cb003e ("drm/amdgpu: implement amdgpu_gem_prime_move_notify v2")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 318917e1d8 ]
[Why & How]
On Framework laptops with DDR5 modules, underflow can be observed.
It's unclear why it only occurs on specific desktop contents. However,
increasing enter/exit latencies by 3us seems to resolve it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4463
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6bded921e ]
Explicit fixed file install/remove operations on slots outside the
configured alloc range can corrupt alloc_hint via io_file_bitmap_set()
and io_file_bitmap_clear(), which unconditionally update alloc_hint to
the bit position. This causes subsequent auto-allocations to fall
outside the configured range.
For example, if the alloc range is [10, 20) and a file is removed at
slot 2, alloc_hint gets set to 2. The next auto-alloc then starts
searching from slot 2, potentially returning a slot below the range.
Fix this by clamping alloc_hint to [file_alloc_start, file_alloc_end)
at the top of io_file_bitmap_get() before starting the search.
Cc: stable@vger.kernel.org
Fixes: 6e73dffbb9 ("io_uring: let to set a range for file slot allocation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f844282dee ]
Since the per-cpu buffer_size_kb file is writable for changing
per-cpu ring buffer size, the file should have the write access
permission.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071301597.2293046.11683339475076917920.stgit@mhiramat.tok.corp.google.com
Fixes: 21ccc9cd72 ("tracing: Disable "other" permission bits in the tracefs files")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf9cf80cab ]
In commit 99537d5c47 ("net: macb: Relocate mog_init_rings() callback
from macb_mac_link_up() to macb_open()"), the mog_init_rings() callback
was moved from macb_mac_link_up() to macb_open() to resolve a deadlock
issue. However, this change introduced a tx/rx malfunction following
phy link down and up events. The issue arises from a mismatch between
the software queue->tx_head, queue->tx_tail, queue->rx_prepared_head,
and queue->rx_tail values and the hardware's internal tx/rx queue
pointers.
According to the Zynq UltraScale TRM [1], when tx/rx is disabled, the
internal tx queue pointer resets to the value in the tx queue base
address register, while the internal rx queue pointer remains unchanged.
The following is quoted from the Zynq UltraScale TRM:
When transmit is disabled, with bit [3] of the network control register
set low, the transmit-buffer queue pointer resets to point to the address
indicated by the transmit-buffer queue base address register. Disabling
receive does not have the same effect on the receive-buffer queue
pointer.
Additionally, there is no need to reset the RBQP and TBQP registers in a
phy event callback. Therefore, move macb_init_buffers() to macb_open().
In a phy link up event, the only required action is to reset the tx
software head and tail pointers to align with the hardware's behavior.
[1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm
Fixes: 99537d5c47 ("net: macb: Relocate mog_init_rings() callback from macb_mac_link_up() to macb_open()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260208-macb-init-ring-v1-1-939a32c14635@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3998b6e90 ]
Commit 95540ad674 ("net: ti: icssg-prueth: Add support for HSR frame
forward offload") introduced support for offloading HSR frame forwarding,
which relies on functions such as is_hsr_master() provided by the HSR
module. Although HSR provides stubs for configurations with HSR
disabled, this driver still requires an optional dependency on HSR.
Otherwise, build failures will occur when icssg-prueth is built-in
while HSR is configured as a module.
ld.lld: error: undefined symbol: is_hsr_master
>>> referenced by icssg_prueth.c:710 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:710)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:681 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:681)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:1812 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:1812)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(prueth_netdevice_event) in archive vmlinux.a
ld.lld: error: undefined symbol: hsr_get_port_ndev
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/etherneteth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:683 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:683)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced 1 more times
Fixes: 95540ad674 ("net: ti: icssg-prueth: Add support for HSR frame forward offload")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260207-icssg-dep-v3-1-8c47c1937f81@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3def995c4e ]
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown.
Fixes: e740003874 ("octeontx2-af: Flow control resource management")
Cc: stable@vger.kernel.org
Signed-off-by: Bo Sun <bo@mboxify.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260206130925.1087588-2-bo@mboxify.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36bd7d5dee ]
The priv->rx_buffer and priv->tx_buffer are alloc'd together as
contiguous buffers in uhdlc_init() but freed as two buffers in
uhdlc_memclean().
Change the cleanup to only call dma_free_coherent() once on the whole
buffer.
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Fixes: c19b6d246a ("drivers/net: support hdlc function for QE-UCC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260206085334.21195-2-fourier.thomas@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d01103fdcb ]
The ID 1186:4302 is matched by both r8169 and skge. The same device ID
should not be in more than one driver, because in that case, which
driver is used is unpredictable. I downloaded the latest drivers for
all hardware revisions of the D-Link DGE-530T from D-Link's website,
and the only drivers which contain this ID are Realtek drivers.
Therefore, remove this device ID from skge.
In the kernel bug report which requested addition of this device ID,
someone created a patch to add the ID to skge. Then, it was pointed
out that this device is an "r8169 in disguise", and a patch was created
to add it to r8169. Somehow, both of these patches got merged. See the
link below.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=38862
Fixes: c074304c2b ("add pci-id for DGE-530T")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260206071724.15268-1-enelsonmoore@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cb37af61f ]
According to Documentation/dev-tools/kasan.rst, software KASAN modes use
compiler instrumentation to insert validity checks. Such instrumentation
might be incompatible with some parts of the kernel, and therefore needs
to be disabled, just use the attribute __no_sanitize_address to disable
instrumentation for the low level function setup_ptwalker().
Otherwise bringing up the secondary CPUs failed when CONFIG_KASAN is set
(especially when PTW is enabled), here are the call chains:
smpboot_entry()
start_secondary()
cpu_probe()
per_cpu_trap_init()
tlb_init()
setup_tlb_handler()
setup_ptwalker()
The reason is the PGD registers are configured in setup_ptwalker(), but
KASAN instrumentation may cause TLB exceptions before that.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77403a06d8 ]
Currently, use %p to prevent leaking information about the kernel memory
layout when printing the PC address, but the kernel log messages are not
useful to debug problem if bt_address() returns 0. Given that the type of
"pc" variable is unsigned long, it should use %px to print the unmodified
unwinding address.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2172d6ebac ]
Currently we use bottom-up allocation after sparse_init(), the reason is
sparse_init() need a lot of memory, and bottom-up allocation may exhaust
precious low memory (below 4GB). On the other hand, SWIOTLB and CMA need
low memories for DMA32, so swiotlb_init() and dma_contiguous_reserve()
need bottom-up allocation.
Since swiotlb_init() and dma_contiguous_reserve() are both called in
arch_mem_init(), we no longer need bottom-up allocation after that. So
we set the allocation policy to top-down at the end of arch_mem_init(),
in order to avoid later memory allocations (such as KASAN) exhaust low
memory.
This solve at least two problems:
1. Some buggy BIOSes use 0xfd000000~0xfe000000 for secondary CPUs, but
didn't reserve this range, which causes smpboot failures.
2. Some DMA32 devices, such as Loongson-DRM and OHCI, cannot work with
KASAN enabled.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94b0c831ed ]
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this.
Cc: stable@vger.kernel.org
Signed-off-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a9be83e57 ]
Custom target specifications are unstable, but starting with Rust 1.95.0,
`rustc` requires to explicitly pass `-Zunstable-options` to use them [1]:
error: error loading target specification: custom targets are unstable and require `-Zunstable-options`
|
= help: run `rustc --print target-list` for a list of built-in targets
David (Rust compiler team lead), writes:
"We're destabilising custom targets to allow us to move forward with
build-std without accidentally exposing functionality that we'd like
to revisit prior to committing to. I'll start a thread on Zulip to
discuss with the RfL team how we can come up with an alternative
for them."
Thus pass it.
Cc: David Wood <david@davidtw.co>
Cc: Wesley Wiser <wwiser@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Link: https://github.com/rust-lang/rust/pull/151534 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260206204535.39431-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e93bb4b76c ]
Since commit 6e690d54cf ("serial: 8250: fix return error code in
serial8250_request_std_resource()"), registering an 8250 MMIO port
without mapbase no longer works, as the resource range is derived from
mapbase/mapsize.
Populate mapbase and mapsize accordingly. Also drop ugly membase KSEG1
pointer and set UPF_IOREMAP instead, letting the 8250 core perform the
ioremap.
Fixes: 6e690d54cf ("serial: 8250: fix return error code in serial8250_request_std_resource()")
Cc: stable@vger.kernel.org
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Link: https://lore.kernel.org/linux-mips/aX-d0ShTplHKZT33@waldemar-brodkorb.de/
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96c4af4185 ]
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cafe4074a7 ]
cpustat_tail indexes cpustat_util[], which is a NUM_SAMPLE_PERIODS-sized
ring buffer. need_counting_irqs() currently wraps the index using
NUM_HARDIRQ_REPORT, which only happens to match NUM_SAMPLE_PERIODS.
Use NUM_SAMPLE_PERIODS for the wrap to keep the ring math correct even if
the NUM_HARDIRQ_REPORT or NUM_SAMPLE_PERIODS changes.
Link: https://lkml.kernel.org/r/tencent_7068189CB6D6689EB353F3D17BF5A5311A07@qq.com
Fixes: e9a9292e23 ("watchdog/softlockup: Report the most frequent interrupts")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhang Run <zhang.run@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dc052234d ]
Enabling KCSAN is causing a large number of duplicate types in BTF for
core kernel structs like task_struct [1]. This is due to the definition
in include/linux/compiler_types.h
`#ifdef __SANITIZE_THREAD__
...
`#define __data_racy volatile
..
`#else
...
`#define __data_racy
...
`#endif
Because some objects in the kernel are compiled without KCSAN flags
(KCSAN_SANITIZE) we sometimes get the empty __data_racy annotation for
objects; as a result we get multiple conflicting representations of the
associated structs in DWARF, and these lead to multiple instances of core
kernel types in BTF since they cannot be deduplicated due to the
additional modifier in some instances.
Moving the __data_racy definition under CONFIG_KCSAN avoids this problem,
since the volatile modifier will be present for both KCSAN and
KCSAN_SANITIZE objects in a CONFIG_KCSAN=y kernel.
Link: https://lkml.kernel.org/r/20260116091730.324322-1-alan.maguire@oracle.com
Fixes: 31f605a308 ("kcsan, compiler_types: Introduce __data_racy type qualifier")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Bart van Assche <bvanassche@acm.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41460a1965 ]
The variable pwlan has the possibility of being NULL when passed into
rtw_free_network_nolock() which would later dereference the variable.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260202205429.20181-1-ethantidmore06@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcf69599c4 ]
If device_register() fails, put_device() is the correct way to
drop the device reference.
Found by code review.
Fixes: 1070c9655b ("[PA-RISC] Fix must_check warnings in drivers.c")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9368d1ee62 ]
Commit a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/20260116184150.3013258-1-kbusch@meta.com]
Fixes: a4e772898f ("PCI: Add missing bridge lock to pci_bus_lock()")
Signed-off-by: Jinhui Guo <guojinhui.liam@bytedance.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251212145528.2555-1-guojinhui.liam@bytedance.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62db84b7ef ]
The current error handling in cpsw_probe() has two issues:
- cpsw_unregister_ports() may be called before cpsw_register_ports() has
been executed.
- cpsw_unregister_ports() is already invoked within cpsw_register_ports()
in case of a register_netdev() failure, but the error path would call
it again.
Fixes: ed3525eda4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/20260205-cpsw-error-path-v1-1-6e58bae6b299@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a70a26c9f ]
The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8
bytes via memset without checking the buffer size parameter. This allows
unprivileged userspace to trigger an out-of bounds kernel memory write
by passing a small buffer, leading to potential privilege
escalation.
Signed-off-by: Sunday Clement <Sunday.Clement@amd.com>
Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a65c0cb0f ]
tipc_aead_users_dec() calls rcu_dereference(aead) twice: once to store
in 'tmp' for the NULL check, and again inside the atomic_add_unless()
call.
Use the already-dereferenced 'tmp' pointer consistently, matching the
correct pattern used in tipc_aead_users_inc() and tipc_aead_users_set().
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Cc: stable@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Hodges <hodgesd@meta.com>
Link: https://patch.msgid.link/20260203145621.17399-1-git@danielhodges.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89b831ebda ]
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a52e4f2dff ]
commit 13b1f8e25b ("usb: dwc2: Force mode optimizations") removed the
dwc2_force_mode(hsotg, true) in dwc2_force_dr_mode() if dr_mode is host.
But this brings a bug: the controller fails to resume back as host,
further debugging shows that the controller is resumed as peripheral.
The reason is dwc2_force_dr_mode() missed the host mode forcing, and
when resuming from s2ram, GINTSTS is 0 by default, dwc2_is_device_mode
in dwc2_resume() misreads this as the controller is in peripheral mode.
Fix the resume failure by adding back the dwc2_force_mode(hsotg, true).
Then an obvious question is: why this bug hasn't been observed and fixed
for about six years? There are two resons: most dwc2 platforms set the
dr_mode as otg; Some platforms don't have suspend & resume support yet.
Fixes: 13b1f8e25b ("usb: dwc2: Force mode optimizations")
Cc: stable <stable@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260129021534.10411-1-jszhang@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54aaa3b387 ]
Currently dwc3_gadget_vbus_draw() can be called from atomic
context, which in turn invokes power-supply-core APIs. And
some these PMIC APIs have operations that may sleep, leading
to kernel panic.
Fix this by moving the vbus_draw into a workqueue context.
Fixes: 99288de360 ("usb: dwc3: add an alternate path in vbus_draw callback")
Cc: stable <stable@kernel.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204054155.3063825-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58fbf08935 ]
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b85f369b81 ]
When both KASAN and SLAB_STORE_USER are enabled, accesses to
struct kasan_alloc_meta fields can be misaligned on 64-bit architectures.
This occurs because orig_size is currently defined as unsigned int,
which only guarantees 4-byte alignment. When struct kasan_alloc_meta is
placed after orig_size, it may end up at a 4-byte boundary rather than
the required 8-byte boundary on 64-bit systems.
Note that 64-bit architectures without HAVE_EFFICIENT_UNALIGNED_ACCESS
are assumed to require 64-bit accesses to be 64-bit aligned.
See HAVE_64BIT_ALIGNED_ACCESS and commit adab66b71a ("Revert:
"ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS"") for more details.
Change orig_size from unsigned int to unsigned long to ensure proper
alignment for any subsequent metadata. This should not waste additional
memory because kmalloc objects are already aligned to at least
ARCH_KMALLOC_MINALIGN.
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo
Suggested-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 6edf2576a6 ("mm/slub: enable debugging memory wasting of kmalloc")
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Closes: https://lore.kernel.org/all/aPrLF0OUK651M4dk@hyeyoo/
Link: https://patch.msgid.link/20260113061845.159790-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8ef441811 ]
Ensure that the exception event handling work is explicitly flushed during
suspend when the runtime power management level is set to UFS_PM_LVL_0.
When the RPM level is zero, the device power mode and link state both
remain active. Previously, the UFS core driver bypassed flushing exception
event handling jobs in this configuration. This created a race condition
where the driver could attempt to access the host controller to handle an
exception after the system had already entered a deep power-down state,
resulting in a system crash.
Explicitly flush this work and disable auto BKOPs before the suspend
callback proceeds. This guarantees that pending exception tasks complete
and prevents illegal hardware access during the power-down sequence.
Fixes: 57d104c153 ("ufs: add UFS power management support")
Signed-off-by: Thomas Yen <thomasyen@google.com>
Cc: Stable Tree <stable@vger.kernel.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260129165156.956601-1-thomasyen@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36c0de0257 ]
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too.
Cc: stable@vger.kernel.org
Fixes: 7819e05a0d ("perf/arm-cmn: Revamp model detection")
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26aa529501 ]
imx_rproc_elf_find_loaded_rsc_table() may incorrectly report a loaded
resource table even when the current firmware does not provide one.
When the device tree contains a "rsc-table" entry, priv->rsc_table is
non-NULL and denotes where a resource table would be located if one is
present in memory. However, when the current firmware has no resource
table, rproc->table_ptr is NULL. The function still returns
priv->rsc_table, and the remoteproc core interprets this as a valid loaded
resource table.
Fix this by returning NULL from imx_rproc_elf_find_loaded_rsc_table() when
there is no resource table for the current firmware (i.e. when
rproc->table_ptr is NULL). This aligns the function's semantics with the
remoteproc core: a loaded resource table is only reported when a valid
table_ptr exists.
With this change, starting firmware without a resource table no longer
triggers a crash.
Fixes: e954a1bd16 ("remoteproc: imx_rproc: Use imx specific hook for find_loaded_rsc_table")
Cc: stable@vger.kernel.org
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260129-imx-rproc-fix-v3-1-fc4e41e6e750@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 912d1c6680 ]
Commit 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle
error better") intended to make device trimming continue even if one
device fails, tracking failures and reporting them at the end. However,
it used 'break' instead of 'continue', causing the loop to exit on the
first device failure.
Fix this by replacing 'break' with 'continue'.
Fixes: 93bba24d4b ("btrfs: Enhance btrfs_trim_fs function to handle error better")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: jinbaohong <jinbaohong@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ec820fc28 ]
The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure
there are 8 slots for those newly registered clk_hw pointers, else
there is going to be out of bounds write when pointers 4..7 are set
into struct rs9_driver_data .clk_dif[4..7] field.
Since there are other structure members past this struct clk_hw
pointer array, writing to .clk_dif[4..7] fields corrupts both
the struct rs9_driver_data content and data around it, sometimes
without crashing the kernel. However, the kernel does surely
crash when the driver is unbound or during suspend.
Fix this, increase the struct clk_hw pointer array size to the
maximum output count of 9FGV0841, which is the biggest chip that
is supported by this driver.
Cc: stable@vger.kernel.org
Fixes: f0e5e18002 ("clk: rs9: Add support for 9FGV0841")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Closes: https://lore.kernel.org/CAMuHMdVyQpOBT+Ho+mXY07fndFN9bKJdaaWGn91WOFnnYErLyg@mail.gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb0c99e08a ]
The implementation of __READ_ONCE() under CONFIG_LTO=y incorrectly
qualified the fallback "once" access for types larger than 8 bytes,
which are not atomic but should still happen "once" and suppress common
compiler optimizations.
The cast `volatile typeof(__x)` applied the volatile qualifier to the
pointer type itself rather than the pointee. This created a volatile
pointer to a non-volatile type, which violated __READ_ONCE() semantics.
Fix this by casting to `volatile typeof(*__x) *`.
With a defconfig + LTO + debug options build, we see the following
functions to be affected:
xen_manage_runstate_time (884 -> 944 bytes)
xen_steal_clock (248 -> 340 bytes)
^-- use __READ_ONCE() to load vcpu_runstate_info structs
Fixes: e35123d83e ("arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y")
Cc: stable@vger.kernel.org
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Tested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5338e365c ]
Commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when
enabling/disabling SR-IOV") tried to fix a race between the VF removal
inside sriov_del_vfs() and concurrent hot unplug by taking the PCI
rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock
was also taken in sriov_add_vfs() to protect addition of VFs.
This approach however causes deadlock on trying to remove PFs with SR-IOV
enabled because PFs disable SR-IOV during removal and this removal happens
under the PCI rescan/remove lock. So the original fix had to be reverted.
Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and
sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs
hotplug higher up in the callchain by taking the lock in
sriov_numvfs_store() before calling into the driver's sriov_configure()
callback.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-2-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa119c0e5 ]
This reverts commit 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking
when enabling/disabling SR-IOV"), which causes a deadlock by recursively
taking pci_rescan_remove_lock when sriov_del_vfs() is called as part of
pci_stop_and_remove_bus_device(). For example with the following sequence
of commands:
$ echo <NUM> > /sys/bus/pci/devices/<pf>/sriov_numvfs
$ echo 1 > /sys/bus/pci/devices/<pf>/remove
A trimmed trace of the deadlock on a mlx5 device is as below:
zsh/5715 is trying to acquire lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: sriov_disable+0x34/0x140
but task is already holding lock:
000002597926ef50 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pci_stop_and_remove_bus_device_locked+0x24/0x80
...
Call Trace:
[<00000259778c4f90>] dump_stack_lvl+0xc0/0x110
[<00000259779c844e>] print_deadlock_bug+0x31e/0x330
[<00000259779c1908>] __lock_acquire+0x16c8/0x32f0
[<00000259779bffac>] lock_acquire+0x14c/0x350
[<00000259789643a6>] __mutex_lock_common+0xe6/0x1520
[<000002597896413c>] mutex_lock_nested+0x3c/0x50
[<00000259784a07e4>] sriov_disable+0x34/0x140
[<00000258f7d6dd80>] mlx5_sriov_disable+0x50/0x80 [mlx5_core]
[<00000258f7d5745e>] remove_one+0x5e/0xf0 [mlx5_core]
[<00000259784857fc>] pci_device_remove+0x3c/0xa0
[<000002597851012e>] device_release_driver_internal+0x18e/0x280
[<000002597847ae22>] pci_stop_bus_device+0x82/0xa0
[<000002597847afce>] pci_stop_and_remove_bus_device_locked+0x5e/0x80
[<00000259784972c2>] remove_store+0x72/0x90
[<0000025977e6661a>] kernfs_fop_write_iter+0x15a/0x200
[<0000025977d7241c>] vfs_write+0x24c/0x300
[<0000025977d72696>] ksys_write+0x86/0x110
[<000002597895b61c>] __do_syscall+0x14c/0x400
[<000002597896e0ee>] system_call+0x6e/0x90
This alone is not a complete fix as it restores the issue the cited commit
tried to solve. A new fix will be provided as a follow on.
Fixes: 05703271c3 ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV")
Reported-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Acked-by: Gerd Bayer <gbayer@linux.ibm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251216-revert_sriov_lock-v3-1-dac4925a7621@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 480e1d5c64 ]
kexec_load_purgatory() derives image->start by locating e_entry inside an
SHF_EXECINSTR section. If the purgatory object contains multiple
executable sections with overlapping sh_addr, the entrypoint check can
match more than once and trigger a WARN.
Derive the entry section from the purgatory_start symbol when present and
compute image->start from its final placement. Keep the existing e_entry
fallback for purgatories that do not expose the symbol.
WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784
Call Trace:
<TASK>
bzImage64_load+0x133/0xa00
__do_sys_kexec_file_load+0x2b3/0x5c0
do_syscall_64+0x81/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[me@linux.beauty: move helper to avoid forward declaration, per Baoquan]
Link: https://lkml.kernel.org/r/20260128043511.316860-1-me@linux.beauty
Link: https://lkml.kernel.org/r/20260120124005.148381-1-me@linux.beauty
Fixes: 8652d44f46 ("kexec: support purgatories with .text.hot sections")
Signed-off-by: Li Chen <me@linux.beauty>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Li Chen <me@linux.beauty>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ricardo Ribalda Delgado <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Sourabh Jain <sourabhjain@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5138c936c2 ]
commit c06c303832 ("ocfs2: fix xattr array entry __counted_by error")
doesn't handle all cases and the cleanup job for preserved xattr entries
still has bug:
- the 'last' pointer should be shifted by one unit after cleanup
an array entry.
- current code logic doesn't cleanup the first entry when xh_count is 1.
Note, commit c06c303832 is also a bug fix for 0fe9b66c65.
Link: https://lkml.kernel.org/r/20251210015725.8409-2-heming.zhao@suse.com
Fixes: 0fe9b66c65 ("ocfs2: Add preserve to reflink.")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 666183dcdd ]
When idtab allocation fails, net is not registered with rio_add_net() yet,
so kfree(net) is sufficient to release the memory. Set mport->net to NULL
to avoid dangling pointer.
Link: https://lkml.kernel.org/r/20260121013508.195836-1-lihaoxiang@isrc.iscas.ac.cn
Fixes: e6b585ca6e ("rapidio: move net allocation into core code")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94350fe6ca ]
This changes fixes following build error which is a miss from ef6e06b2ef
("highmem: fix kmap_to_page() for kmap_local_page() addresses").
mm/highmem.c:184:66: error: 'pteval' undeclared (first use in this
function); did you mean 'pte_val'?
184 | idx = arch_kmap_local_map_idx(i, pte_pfn(pteval));
In __kmap_to_page(), pteval is used but does not exist in the function.
(akpm: affects xtensa only)
Link: https://lkml.kernel.org/r/SJ0PR07MB86317E00EC0C59DA60935FDCD18DA@SJ0PR07MB8631.namprd07.prod.outlook.com
Fixes: ef6e06b2ef ("highmem: fix kmap_to_page() for kmap_local_page() addresses")
Signed-off-by: William Tambe <williamt@cadence.com>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4af7d194d ]
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd052 ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b79b24f578 ]
The return value from itg3200_read_reg_s16() is stored in ret but
never checked. The function unconditionally returns IIO_VAL_INT,
ignoring potential I2C read failures. This causes garbage data to
be returned to userspace when the read fails, with no error reported.
Add proper error checking to propagate the failure to callers.
Fixes: 9dbf091da0 ("iio: gyro: Add itg3200")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33c1c6d8a2 ]
As kcalloc() may fail, check its return value to avoid a NULL pointer
dereference when passing it to of_property_read_u32_array().
Fixes: 790a1662d3 ("powerpc/smp: Parse ibm,thread-groups with multiple properties")
Cc: stable@vger.kernel.org
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250923133235.1862108-1-lgs201920130244@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd025c1e87 ]
Remove duplication by consolidating these here. This reduces the
posibility of a parent driver missing them.
While we're at it, fix a bug in vdpa_sim where a valid ASID can be
assigned to a group equal to ngroups, causing an out of bound write.
Cc: stable@vger.kernel.org
Fixes: bda324fd03 ("vdpasim: control virtqueue support")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20260119143306.1818855-2-eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a537c0da16 ]
A perf build failure was reported by Thomas Voegtle on stable kernel
v6.6.120:
CC tests/sample-parsing.o
CC util/intel-pt-decoder/intel-pt-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_csky.o
CC util/arm-spe-decoder/arm-spe-pkt-decoder.o
CC util/perf-regs-arch/perf_regs_loongarch.o
In file included from util/arm-spe-decoder/arm-spe-pkt-decoder.h:10,
from util/arm-spe-decoder/arm-spe-pkt-decoder.c:14:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h: In function ‘le16_encode_bits’:
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:166:31: error: implicit declaration of
function ‘cpu_to_le16’; did you mean ‘htole16’? [-Werror=implicit-function-declaration]
____MAKE_OP(le##size,u##size,cpu_to_le##size,le##size##_to_cpu) \
^~~~~~~~~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:149:9: note: in definition of macro
‘____MAKE_OP’
return to((v & field_mask(field)) * field_multiplier(field)); \
^~
/local/git/linux-stable-rc/tools/include/linux/bitfield.h:170:1: note: in expansion of macro
‘__MAKE_OP’
__MAKE_OP(16)
Fix this by including linux/kernel.h, which provides the required
definitions.
The issue was not found on the mainline due to the relevant C files have
included kernel.h. It'd be good to merge this change on mainline
as well for robustness.
Closes: https://lore.kernel.org/stable/3a44500b-d7c8-179f-61f6-e51cb50d3512@lio96.de/
Fixes: 64d86c03e1 ("perf arm-spe: Extend branch operations")
Reported-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
To: Sasha Levin <sashal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f3b950492 ]
If a process wrote to POR_EL0 and then crashed before a context switch
happened, the coredump would contain an incorrect value for POR_EL0.
The value read in poe_get() would be a stale value left in thread.por_el0. Fix
this by reading the value from the system register, if the target thread is the
current thread.
This matches what gcs/fpsimd do.
Fixes: 1751981992 ("arm64/ptrace: add support for FEAT_POE")
Reported-by: David Spickett <david.spickett@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
