commit 4ff39d6de4 upstream.
fwnode_irq_get_byname() returns a negative value on failure; if a negative
value is returned, use it as `err` argument for dev_err_probe().
While at it, add a missing trailing newline to the dev_err_probe() error
message.
Fixes: df36de1367 ("iio: accel: add ADXL380 driver")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7880cb166 upstream.
Syzbot has found a deadlock (analyzed by Lance Yang):
1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock).
2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire
folio_lock.
migrate_pages()
-> migrate_hugetlbs()
-> unmap_and_move_huge_page() <- Takes folio_lock!
-> remove_migration_ptes()
-> __rmap_walk_file()
-> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)!
hugetlbfs_fallocate()
-> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)!
-> hugetlbfs_zero_partial_page()
-> filemap_lock_hugetlb_folio()
-> filemap_lock_folio()
-> __filemap_get_folio <- Waits for folio_lock!
The migration path is the one taking locks in the wrong order according to
the documentation at the top of mm/rmap.c. So expand the scope of the
existing i_mmap_lock to cover the calls to remove_migration_ptes() too.
This is (mostly) how it used to be after commit c0d0381ade. That was
removed by 336bf30eb7 for both file & anon hugetlb pages when it should
only have been removed for anon hugetlb pages.
Link: https://lkml.kernel.org/r/20260109041345.3863089-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: 336bf30eb7 ("hugetlbfs: fix anon huge page migration race")
Reported-by: syzbot+2d9c96466c978346b55f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/all/68e9715a.050a0220.1186a4.000d.GAE@google.com
Debugged-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: Jann Horn <jannh@google.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Ying Huang <ying.huang@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48e6a9c4a2 upstream.
Calling of_platform_populate() without a match table will only populate
the immediate child nodes under /firmware. This is usually fine, but in
the case of something like a "simple-mfd" node such as
"raspberrypi,bcm2835-firmware", those child nodes will not be populated.
And subsequent calls won't work either because the /firmware node is
marked as processed already.
Switch the call to of_platform_default_populate() to solve this problem.
It should be a nop for existing cases.
Fixes: 3aa0582fdb ("of: platform: populate /firmware/ node from of_platform_default_populate_init()")
Cc: stable@vger.kernel.org
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20260114015158.692170-2-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81122fba08 upstream.
of_find_node_by_path() returns a device_node with its refcount
incremented. When kstrtoint() fails or dt_alloc() fails, the function
continues to the next iteration without calling of_node_put(), causing
a reference count leak.
Add of_node_put(np) before continue on both error paths to properly
release the device_node reference.
Fixes: 611cad7201 ("dt: add of_alias_scan and of_alias_get_id")
Cc: stable@vger.kernel.org
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Link: https://patch.msgid.link/20260117091238.481243-1-geoffreyhe2@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90f3c12324 upstream.
The panic_print_deprecated() warning is being triggered on both read and
write operations to the panic_print parameter.
This causes spurious warnings when users run 'sysctl -a' to list all
sysctl values, since that command reads /proc/sys/kernel/panic_print and
triggers the deprecation notice.
Modify the handlers to only emit the deprecation warning when the
parameter is actually being set:
- sysctl_panic_print_handler(): check 'write' flag before warning.
- panic_print_get(): remove the deprecation call entirely.
This way, users are only warned when they actively try to use the
deprecated parameter, not when passively querying system state.
Link: https://lkml.kernel.org/r/20260106163321.83586-1-gal@nvidia.com
Fixes: ee13240cd7 ("panic: add note that panic_print sysctl interface is deprecated")
Fixes: 2683df6539 ("panic: add note that 'panic_print' parameter is deprecated")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Cc: Feng Tang <feng.tang@linux.alibaba.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1883cefd3 upstream.
Before this change the LED was added to leds_list before led_init_core()
gets called adding it the list before led_classdev.set_brightness_work gets
initialized.
This leaves a window where led_trigger_register() of a LED's default
trigger will call led_trigger_set() which calls led_set_brightness()
which in turn will end up queueing the *uninitialized*
led_classdev.set_brightness_work.
This race gets hit by the lenovo-thinkpad-t14s EC driver which registers
2 LEDs with a default trigger provided by snd_ctl_led.ko in quick
succession. The first led_classdev_register() causes an async modprobe of
snd_ctl_led to run and that async modprobe manages to exactly hit
the window where the second LED is on the leds_list without led_init_core()
being called for it, resulting in:
------------[ cut here ]------------
WARNING: CPU: 11 PID: 5608 at kernel/workqueue.c:4234 __flush_work+0x344/0x390
Hardware name: LENOVO 21N2S01F0B/21N2S01F0B, BIOS N42ET93W (2.23 ) 09/01/2025
...
Call trace:
__flush_work+0x344/0x390 (P)
flush_work+0x2c/0x50
led_trigger_set+0x1c8/0x340
led_trigger_register+0x17c/0x1c0
led_trigger_register_simple+0x84/0xe8
snd_ctl_led_init+0x40/0xf88 [snd_ctl_led]
do_one_initcall+0x5c/0x318
do_init_module+0x9c/0x2b8
load_module+0x7e0/0x998
Close the race window by moving the adding of the LED to leds_list to
after the led_init_core() call.
Cc: stable@vger.kernel.org
Fixes: d23a22a74f ("leds: delay led_set_brightness if stopping soft-blink")
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Link: https://patch.msgid.link/20251211163727.366441-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6342969daf ]
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 614da1d3d4 ]
There's a big comment in the x86 do_page_fault() about our interrupt
disabling code:
* User address page fault handling might have reenabled
* interrupts. Fixing up all potential exit points of
* do_user_addr_fault() and its leaf functions is just not
* doable w/o creating an unholy mess or turning the code
* upside down.
but it turns out that comment is subtly wrong, and the code as a result
is also wrong.
Because it's certainly true that we may have re-enabled interrupts when
handling user page faults. And it's most certainly true that we don't
want to bother fixing up all the cases.
But what isn't true is that it's limited to user address page faults.
The confusion stems from the fact that we have logic here that depends
on the address range of the access, but other code then depends on the
_context_ the access was done in. The two are not related, even though
both of them are about user-vs-kernel.
In other words, both user and kernel addresses can cause interrupts to
have been enabled (eg when __bad_area_nosemaphore() gets called for user
accesses to kernel addresses). As a result we should make sure to
disable interrupts again regardless of the address range before
returning to the low-level fault handling code.
The __bad_area_nosemaphore() code actually did disable interrupts again
after enabling them, just not consistently. Ironically, as noted in the
original comment, fixing up all the cases is just not worth it, when the
simple solution is to just do it unconditionally in one single place.
So remove the incomplete case that unsuccessfully tried to do what the
comment said was "not doable" in commit ca4c6a9858 ("x86/traps: Make
interrupt enable/disable symmetric in C code"), and just make it do the
simple and straightforward thing.
Signed-off-by: Cedric Xing <cedric.xing@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Fixes: ca4c6a9858 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ddbaaaaf ]
Modify the internal registration helpers dpll_xa_ref_{dpll,pin}_add()
to reject duplicate registration attempts.
Previously, if a caller attempted to register the same pin multiple
times (with the same ops, priv, and cookie) on the same device, the core
silently increments the reference count and return success. This behavior
is incorrect because if the caller makes these duplicate registrations
then for the first one dpll_pin_registration is allocated and for others
the associated dpll_pin_ref.refcount is incremented. During the first
unregistration the associated dpll_pin_registration is freed and for
others WARN is fired.
Fix this by updating the logic to return `-EEXIST` if a matching
registration is found to enforce a strict "register once" policy.
Fixes: 9431063ad3 ("dpll: core: Add DPLL framework base functions")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260121130012.112606-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb2bb2a1eb ]
Incorrectly transmitted interrupt number instead of queue number
when using netif_queue_set_napi. Besides, move this to appropriate
code location to set napi.
Remove redundant netif_stop_subqueue beacuase it is not part of the
hinic3_send_one_skb process.
Fixes: 17fcb3dc12 ("hinic3: module initialization and tx/rx logic")
Co-developed-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Zhu Yikai <zhuyikai1@h-partners.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Link: https://patch.msgid.link/7b8e4eb5c53cbd873ee9aaefeb3d9dbbaff52deb.1769070766.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ee784fdf0 ]
The virtio transports derives its TX credit directly from peer_buf_alloc,
which is set from the remote endpoint's SO_VM_SOCKETS_BUFFER_SIZE value.
On the host side this means that the amount of data we are willing to
queue for a connection is scaled by a guest-chosen buffer size, rather
than the host's own vsock configuration. A malicious guest can advertise
a large buffer and read slowly, causing the host to allocate a
correspondingly large amount of sk_buff memory.
The same thing would happen in the guest with a malicious host, since
virtio transports share the same code base.
Introduce a small helper, virtio_transport_tx_buf_size(), that
returns min(peer_buf_alloc, buf_alloc), and use it wherever we consume
peer_buf_alloc.
This ensures the effective TX window is bounded by both the peer's
advertised buffer and our own buf_alloc (already clamped to
buffer_max_size via SO_VM_SOCKETS_BUFFER_MAX_SIZE), so a remote peer
cannot force the other to queue more data than allowed by its own
vsock settings.
On an unpatched Ubuntu 22.04 host (~64 GiB RAM), running a PoC with
32 guest vsock connections advertising 2 GiB each and reading slowly
drove Slab/SUnreclaim from ~0.5 GiB to ~57 GiB; the system only
recovered after killing the QEMU process. That said, if QEMU memory is
limited with cgroups, the maximum memory used will be limited.
With this patch applied:
Before:
MemFree: ~61.6 GiB
Slab: ~142 MiB
SUnreclaim: ~117 MiB
After 32 high-credit connections:
MemFree: ~61.5 GiB
Slab: ~178 MiB
SUnreclaim: ~152 MiB
Only ~35 MiB increase in Slab/SUnreclaim, no host OOM, and the guest
remains responsive.
Compatibility with non-virtio transports:
- VMCI uses the AF_VSOCK buffer knobs to size its queue pairs per
socket based on the local vsk->buffer_* values; the remote side
cannot enlarge those queues beyond what the local endpoint
configured.
- Hyper-V's vsock transport uses fixed-size VMBus ring buffers and
an MTU bound; there is no peer-controlled credit field comparable
to peer_buf_alloc, and the remote endpoint cannot drive in-flight
kernel memory above those ring sizes.
- The loopback path reuses virtio_transport_common.c, so it
naturally follows the same semantics as the virtio transport.
This change is limited to virtio_transport_common.c and thus affects
virtio-vsock, vhost-vsock, and loopback, bringing them in line with the
"remote window intersected with local policy" behaviour that VMCI and
Hyper-V already effectively have.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: small adjustments after changing the previous patch]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-4-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a98de8013 ]
The test requires the sender (client) to send all messages before waking
up the receiver (server).
Since virtio-vsock had a bug and did not respect the size of the TX
buffer, this test worked, but now that we are going to fix the bug, the
test hangs because the sender would fill the TX buffer before waking up
the receiver.
Set the buffer size in the sender (client) as well, as we already do for
the receiver (server).
Fixes: 5c338112e4 ("test/vsock: rework message bounds test")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-3-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ef3d52a1a ]
The credit calculation in virtio_transport_get_credit() uses unsigned
arithmetic:
ret = vvs->peer_buf_alloc - (vvs->tx_cnt - vvs->peer_fwd_cnt);
If the peer shrinks its advertised buffer (peer_buf_alloc) while bytes
are in flight, the subtraction can underflow and produce a large
positive value, potentially allowing more data to be queued than the
peer can handle.
Reuse virtio_transport_has_space() which already handles this case and
add a comment to make it clear why we are doing that.
Fixes: 06a8fc7836 ("VSOCK: Introduce virtio_vsock_common.ko")
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Melbin K Mathew <mlbnkm1@gmail.com>
[Stefano: use virtio_transport_has_space() instead of duplicating the code]
[Stefano: tweak the commit message]
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20260121093628.9941-2-sgarzare@redhat.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc4816bdb0 ]
In ovs_vport_get_upcall_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics are already accumulated
by u64_stats_inc(). Fix this by reading them into temporary variables
first.
Fixes: 1933ea365a ("net: openvswitch: Add support to count upcall packets")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Acked-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260121072932.2360971-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8ca461f7d ]
It turns out that 2500Base-X actually works fine with in-band status on
MediaTek's LynxI PCS -- I wrongly concluded it didn't because it is
broken in all the copper SFP modules and GPON sticks I used for testing.
Hence report LINK_INBAND_ENABLE also for 2500Base-X mode.
This reverts most of commit a003c38d9b ("net: pcs: pcs-mtk-lynxi:
correctly report in-band status capabilities").
The removal of the QSGMII interface mode was correct and is left
untouched.
Link: https://github.com/openwrt/openwrt/issues/21436
Fixes: a003c38d9b ("net: pcs: pcs-mtk-lynxi: correctly report in-band status capabilities")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b1cf26157b63fee838be09ae810497fb22fd8104.1768961746.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfca045cd4 ]
Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Fixes: 3f9bb0301d ("net: dsa: make dp->bridge_num one-based")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260120211039.3228999-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbb11b8d75 ]
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f9b329096 ]
After 3cbf4ffba5 ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Fixes: 58deb77cc5 ("bonding: balance ICMP echoes in layer3+4 mode")
Reported-by: syzbot+c46409299c70a221415e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/696faa23.050a0220.4cb9c.001f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matteo Croce <mcroce@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260120161744.1893263-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04708606fd ]
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8215794403 ]
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0bd10792d ]
* Implement missing DCB connectors in uconn.c previously defined in conn.h.
* Replace kernel WARN_ON macro with printk message to more gracefully signify
an unknown connector was encountered.
With this patch, unknown connectors are explicitly marked with value 0
(DCB_CONNECTOR_VGA) to match the tested current behavior. Although 0xff
(DCB_CONNECTOR_NONE) may be more suitable, I don't want to introduce a
breaking change.
Fixes: 8b7d92cad9 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Remove unneeded parenthesis around nvkm_warn()]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-3-lxrmrz732@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3036b4ce4b ]
* Add missing DCB connectors in conn.h as per the NVIDIA DCB specification.
A lot of connector logic was rewritten for Linux v6.5; some display connector types
went unaccounted-for which caused kernel warnings on devices with the now-unsupported
DCB connectors. This patch adds all of the DCB connectors as defined by NVIDIA to the
dcb_connector_type enum to bring back support for these connectors to the new logic.
Fixes: 8b7d92cad9 ("drm/nouveau/kms/nv50-: create connectors based on nvkm info")
Link: https://download.nvidia.com/open-gpu-doc/DCB/1/DCB-4.0-Specification.html#_connector_table_entry
Signed-off-by: Alex Ramírez <lxrmrz732@rocketmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Lyude: Clarify DCB_CONNECTOR_HDMI_0 weirdness in comments]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251213005327.9495-2-lxrmrz732@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 095ca81517 ]
Needs to be a u64.
Fixes: 77cc0da39c ("drm/amdgpu: track ring state associated with a fence")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 56fff1941a)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 764a90eb02 ]
Radeon 430 and 520 are OEM GPUs from 2016~2017
They have the same device id: 0x6611 and revision: 0x87
On the Radeon 430, powertune is buggy and throttles the GPU,
never allowing it to reach its maximum SCLK. Work around this
bug by raising the TDP limits we program to the SMC from
24W (specified by the VBIOS on Radeon 430) to 32W.
Disabling powertune entirely is not a viable workaround,
because it causes the Radeon 520 to heat up above 100 C,
which I prefer to avoid.
Additionally, revise the maximum SCLK limit. Considering the
above issue, these GPUs never reached a high SCLK on Linux,
and the workarounds were added before the GPUs were released,
so the workaround likely didn't target these specifically.
Use 780 MHz (the maximum SCLK according to the VBIOS on the
Radeon 430). Note that the Radeon 520 VBIOS has a higher
maximum SCLK: 905 MHz, but in practice it doesn't seem to
perform better with the higher clock, only heats up more.
v2:
Move the workaround to si_populate_smc_tdp_limits.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 966d70f1e1)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5077426e1 ]
There is no reason to clear the SMC table.
We also don't need to recalculate the power limit then.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e214d62625)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ca284c6d1 ]
Use WREG32 to write mmCG_THERMAL_INT.
This is a direct access register.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2555f4e4a7)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98c88dc8a1 ]
Samuel and Alex reported regressions of the util_avg of RT rq with
commit 17e3e88ed0 ("sched/fair: Fix pelt lost idle time detection").
It happens that fair is updating and syncing the pelt clock with task one
when pick_next_task_fair() fails to pick a task but before the prev
scheduling class got a chance to update its pelt signals.
Move update_idle_rq_clock_pelt() in set_next_task_idle() which is called
after prev class has been called.
Fixes: 17e3e88ed0 ("sched/fair: Fix pelt lost idle time detection")
Closes: https://lore.kernel.org/all/CAG2KctpO6VKS6GN4QWDji0t92_gNBJ7HjjXrE+6H+RwRXt=iLg@mail.gmail.com/
Closes: https://lore.kernel.org/all/8cf19bf0e0054dcfed70e9935029201694f1bb5a.camel@mediatek.com/
Reported-by: Samuel Wu <wusamuel@google.com>
Reported-by: Alex Hoh <Alex.Hoh@mediatek.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Samuel Wu <wusamuel@google.com>
Tested-by: Alex Hoh <Alex.Hoh@mediatek.com>
Link: https://patch.msgid.link/20260121163317.505635-1-vincent.guittot@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06bf78e55 ]
When calling refcount_inc(&event->mmap_count) inside perf_mmap_rb(), the
following warning is triggered:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25
PoC:
struct perf_event_attr attr = {0};
int fd = syscall(__NR_perf_event_open, &attr, 0, -1, -1, 0);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
int victim = syscall(__NR_perf_event_open, &attr, 0, -1, fd,
PERF_FLAG_FD_OUTPUT);
mmap(NULL, 0x3000, PROT_READ | PROT_WRITE, MAP_SHARED, victim, 0);
This occurs when creating a group member event with the flag
PERF_FLAG_FD_OUTPUT. The group leader should be mmap-ed and then mmap-ing
the event triggers the warning.
Since the event has copied the output_event in perf_event_set_output(),
event->rb is set. As a result, perf_mmap_rb() calls
refcount_inc(&event->mmap_count) when event->mmap_count = 0.
Disallow the case when event->mmap_count = 0. This also prevents two
events from updating the same user_page.
Fixes: 448f97fba9 ("perf: Convert mmap() refcounts to refcount_t")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Will Rosenberg <whrosenb@asu.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260119184956.801238-1-whrosenb@asu.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7e1cc18f1 ]
Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output
when running kublk in foreground mode. Without this, _evtfd is
zero-initialized to 0 (stdin), and ublk_send_dev_event() writes
binary data to stdin which appears as garbage on the terminal.
Also fix debug message format string.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23e62cf755 ]
Fix error handling in ublk_start_daemon() when start_dev fails:
1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before
cleanup. Without this, the device deletion may hang waiting for
I/O completion that will never happen.
2. Add fail_start label so that pthread_join() is called on the
error path. This ensures proper thread cleanup when startup fails.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75aad5ffe0 ]
Include cmd_inflight in ublk_thread_is_done() check. Without this,
the thread may exit before all FETCH commands are completed, which
may cause device deletion to hang.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47bdf1d29c ]
When ublksrv runs inside a pid namespace, START/END_RECOVERY compared
the stored init-ns tgid against the userspace pid (getpid vnr), so the
check failed and control ops could not proceed. Compare against the
caller’s init-ns tgid and store that value, then translate it back to
the caller’s pid namespace when reporting GET_DEV_INFO so ublk list
shows a sensible pid.
Testing: start/recover in a pid namespace; `ublk list` shows
reasonable pid values in init, child, and sibling namespaces.
Fixes: c2c8089f32 ("ublk: validate ublk server pid")
Signed-off-by: Seamus Connor <sconnor@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f262015b97 ]
Previously, the driver's internal wedged.mode state was updated without
verifying whether the corresponding engine reset policy update in GuC
succeeded. This could leave the driver reporting a wedged.mode state
that doesn't match the actual reset behavior programmed in GuC.
With this change, the reset policy is updated first, and the driver's
wedged.mode state is modified only if the policy update succeeds on all
available GTs.
This patch also introduces two functional improvements:
- The policy is sent to GuC only when a change is required. An update
is needed only when entering or leaving XE_WEDGED_MODE_UPON_ANY_HANG,
because only in that case the reset policy changes. For example,
switching between XE_WEDGED_MODE_UPON_CRITICAL_ERROR and
XE_WEDGED_MODE_NEVER doesn't affect the reset policy, so there is no
need to send the same value to GuC.
- An inconsistent_reset flag is added to track cases where reset policy
update succeeds only on a subset of GTs. If such inconsistency is
detected, future wedged mode configuration will force a retry of the
reset policy update to restore a consistent state across all GTs.
Fixes: 6b8ef44cc0 ("drm/xe: Introduce the wedged_mode debugfs")
Signed-off-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patch.msgid.link/20260107174741.29163-3-lukasz.laguna@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 0f13dead4e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50a59230fa ]
Add a scope-based helpers for runtime PM that may be used to simplify
cleanup logic and potentially avoid goto-based cleanup.
For example, using
guard(xe_pm_runtime)(xe);
will get runtime PM and cause a corresponding put to occur automatically
when the current scope is exited. 'xe_pm_runtime_noresume' can be used
as a guard replacement for the corresponding 'noresume' variant.
There's also an xe_pm_runtime_ioctl conditional guard that can be used
as a replacement for xe_runtime_ioctl():
ACQUIRE(xe_pm_runtime_ioctl, pm)(xe);
if ((ret = ACQUIRE_ERR(xe_pm_runtime_ioctl, &pm)) < 0)
/* failed */
In a few rare cases (such as gt_reset_worker()) we need to ensure that
runtime PM is dropped when the function is exited by any means
(including error paths), but the function does not need to acquire
runtime PM because that has already been done earlier by a different
function. For these special cases, an 'xe_pm_runtime_release_only'
guard can be used to handle the release without doing an acquisition.
These guards will be used in future patches to eliminate some of our
goto-based cleanup.
v2:
- Specify success condition for xe_pm runtime_ioctl as _RET >= 0 so
that positive values will be properly identified as success and
trigger destructor cleanup properly.
v3:
- Add comments to the kerneldoc for the existing 'get' functions
indicating that scope-based handling should be preferred where
possible. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 59e7528dbf)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Stable-dep-of: f262015b97 ("drm/xe: Update wedged.mode only after successful reset policy change")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 772157f626 ]
We are meant to be checking the user vm for the bind queue, but actually
we are checking the migrate vm. For various reasons this is not
currently firing but this will likely change in the future.
Now that we have the user_vm attached to the bind queue, we can fix this
by directly checking that here.
Fixes: dba89840a9 ("drm/xe: Add GT TLB invalidation jobs")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-4-matthew.auld@intel.com
(cherry picked from commit 9dd1048bca)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f4b7aed61 ]
Currently this is very broken if someone attempts to create a bind
queue and share it across multiple VMs. For example currently we assume
it is safe to acquire the user VM lock to protect some of the bind queue
state, but if allow sharing the bind queue with multiple VMs then this
quickly breaks down.
To fix this reject using a bind queue with any VM that is not the same
VM that was originally passed when creating the bind queue. This a uAPI
change, however this was more of an oversight on kernel side that we
didn't reject this, and expectation is that userspace shouldn't be using
bind queues in this way, so in theory this change should go unnoticed.
Based on a patch from Matt Brost.
v2 (Matt B):
- Hold the vm lock over queue create, to ensure it can't be closed as
we attach the user_vm to the queue.
- Make sure we actually check for NULL user_vm in destruction path.
v3:
- Fix error path handling.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Acked-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Arvind Yadav <arvind.yadav@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patch.msgid.link/20260120110609.77958-3-matthew.auld@intel.com
(cherry picked from commit 9dd08fdecc)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Stable-dep-of: 772157f626 ("drm/xe/migrate: fix job lock assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c06343be0b ]
The "valid" readout delay between the two reads of the watchdog is larger
than the valid delta between the resulting watchdog and clocksource
intervals, which results in false positive watchdog results.
Assume TSC is the clocksource and HPET is the watchdog and both have a
uncertainty margin of 250us (default). The watchdog readout does:
1) wdnow = read(HPET);
2) csnow = read(TSC);
3) wdend = read(HPET);
The valid window for the delta between #1 and #3 is calculated by the
uncertainty margins of the watchdog and the clocksource:
m = 2 * watchdog.uncertainty_margin + cs.uncertainty margin;
which results in 750us for the TSC/HPET case.
The actual interval comparison uses a smaller margin:
m = watchdog.uncertainty_margin + cs.uncertainty margin;
which results in 500us for the TSC/HPET case.
That means the following scenario will trigger the watchdog:
Watchdog cycle N:
1) wdnow[N] = read(HPET);
2) csnow[N] = read(TSC);
3) wdend[N] = read(HPET);
Assume the delay between #1 and #2 is 100us and the delay between #1 and
Watchdog cycle N + 1:
4) wdnow[N + 1] = read(HPET);
5) csnow[N + 1] = read(TSC);
6) wdend[N + 1] = read(HPET);
If the delay between #4 and #6 is within the 750us margin then any delay
between #4 and #5 which is larger than 600us will fail the interval check
and mark the TSC unstable because the intervals are calculated against the
previous value:
wd_int = wdnow[N + 1] - wdnow[N];
cs_int = csnow[N + 1] - csnow[N];
Putting the above delays in place this results in:
cs_int = (wdnow[N + 1] + 610us) - (wdnow[N] + 100us);
-> cs_int = wd_int + 510us;
which is obviously larger than the allowed 500us margin and results in
marking TSC unstable.
Fix this by using the same margin as the interval comparison. If the delay
between two watchdog reads is larger than that, then the readout was either
disturbed by interconnect congestion, NMIs or SMIs.
Fixes: 4ac1dd3245 ("clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin")
Reported-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/lkml/20250602223251.496591-1-daniel@quora.org/
Link: https://patch.msgid.link/87bjjxc9dq.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf8de9c6b ]
In recent testing, verification of XDP_REDIRECT and zero-copy features
failed because the driver is not setting the corresponding feature flags.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://patch.msgid.link/20260119100222.2267925-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7159e960f ]
The usbnet driver initializes net->max_mtu to ETH_MAX_MTU before calling
the device's bind() callback. When the bind() callback sets
dev->hard_mtu based the device's actual capability (from CDC Ethernet's
wMaxSegmentSize descriptor), max_mtu is never updated to reflect this
hardware limitation).
This allows userspace (DHCP or IPv6 RA) to configure MTU larger than the
device can handle, leading to silent packet drops when the backend sends
packet exceeding the device's buffer size.
Fix this by limiting net->max_mtu to the device's hard_mtu after the
bind callback returns.
See https://gitlab.com/qemu-project/qemu/-/issues/3268 and
https://bugs.passt.top/attachment.cgi?bugid=189
Fixes: f77f0aee4d ("net: use core MTU range checking in USB NIC drivers")
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://bugs.passt.top/show_bug.cgi?id=189
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Link: https://patch.msgid.link/20260119075518.2774373-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a063f96d8 ]
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659
Fixes: 49b99da2c9 ("ipv6: add IFLA_INET6_RA_MTU to expose mtu value")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rocco Yue <rocco.yue@mediatek.com>
Link: https://patch.msgid.link/20260118152941.2563857-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d57c67c956 ]
HCLGE_FD_AD_COUNTER_NUM_M should be at GENMASK(19, 13),
rather than at GENMASK(20, 13), because bit 20 is
HCLGE_FD_AD_NXT_STEP_B.
This patch corrects the wrong definition.
Fixes: 1173286802 ("net: hns3: Add input key and action config support for flow director")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260119132840.410513-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 302e5b481c ]
In be_get_new_eqd(), statistics of pkts, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. Before the commit in question, these statistics were retrieved
one by one directly from queues. Fix this by reading them into temporary
variables first.
Fixes: 2094777041 ("be2net: set interrupt moderation for Skyhawk-R using EQ-DB")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260119153440.1440578-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fbe395cd1 ]
In idpf_net_dim(), some statistics protected by u64_stats_sync, are read
and accumulated in ignorance of possible u64_stats_fetch_retry() events.
The correct way to copy statistics is already illustrated by
idpf_add_queue_stats(). Fix this by reading them into temporary variables
first.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260119162720.1463859-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748a81c8ce ]
In hns3_fetch_stats(), ring statistics, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. These statistics are already accumulated by
hns3_ring_stats_update(). Fix this by reading them into a temporary
buffer first.
Fixes: b20d7fe51e ("net: hns3: add some statitics info to tx process")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260119160759.1455950-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
