commit eed3013faa upstream.
Grab a reference to KVM prior to installing VM and vCPU stats file
descriptors to ensure the underlying VM and vCPU objects are not freed
until the last reference to any and all stats fds are dropped.
Note, the stats paths manually invoke fd_install() and so don't need to
grab a reference before creating the file.
Fixes: ce55c04945 ("KVM: stats: Support binary stats retrieval for a VCPU")
Fixes: fcfe1baedd ("KVM: stats: Support binary stats retrieval for a VM")
Reported-by: Zheng Zhang <zheng.zhang@email.ucr.edu>
Closes: https://lore.kernel.org/all/CAC_GQSr3xzZaeZt85k_RCBd5kfiOve8qXo7a81Cq53LuVQ5r=Q@mail.gmail.com
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Message-Id: <20230711230131.648752-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4fc01af5b upstream.
The legacy gadget driver omitted calling usb_gadget_check_config()
to ensure that the USB device controller (UDC) has adequate resources,
including sufficient endpoint numbers and types, to support the given
configuration.
Previously, usb_add_config() was solely invoked by the legacy gadget
driver. Adds the necessary usb_gadget_check_config() after the bind()
operation to fix the issue.
Fixes: dce49449e0 ("usb: cdns3: allocate TX FIFO size according to composite EP number")
Cc: stable <stable@kernel.org>
Reported-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230707230015.494999-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8291be6b5 upstream.
This reverts commit f08aa7c80d.
The reverted commit was based on static analysis and a misunderstanding
of how PTR_ERR() and NULLs are supposed to work. When a function
returns both pointer errors and NULL then normally the NULL means
"continue operating without a feature because it was deliberately
turned off". The NULL should not be treated as a failure. If a driver
cannot work when that feature is disabled then the KConfig should
enforce that the function cannot return NULL. We should not need to
test for it.
In this driver, the bug means that probe cannot succeed when CONFIG_PM
is disabled.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f08aa7c80d ("usb: gadget: tegra-xudc: Fix error check in tegra_xudc_powerdomain_init()")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/ZKQoBa84U/ykEh3C@moroto
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dea499781a ]
Warning happened in trace_buffered_event_disable() at
WARN_ON_ONCE(!trace_buffered_event_ref)
Call Trace:
? __warn+0xa5/0x1b0
? trace_buffered_event_disable+0x189/0x1b0
__ftrace_event_enable_disable+0x19e/0x3e0
free_probe_data+0x3b/0xa0
unregister_ftrace_function_probe_func+0x6b8/0x800
event_enable_func+0x2f0/0x3d0
ftrace_process_regex.isra.0+0x12d/0x1b0
ftrace_filter_write+0xe6/0x140
vfs_write+0x1c9/0x6f0
[...]
The cause of the warning is in __ftrace_event_enable_disable(),
trace_buffered_event_enable() was called once while
trace_buffered_event_disable() was called twice.
Reproduction script show as below, for analysis, see the comments:
```
#!/bin/bash
cd /sys/kernel/tracing/
# 1. Register a 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was set;
# 2) trace_buffered_event_enable() was called first time;
echo 'cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
# 2. Enable the event registered, then:
# 1) SOFT_DISABLED_BIT was cleared;
# 2) trace_buffered_event_disable() was called first time;
echo 1 > events/initcall/initcall_finish/enable
# 3. Try to call into cmdline_proc_show(), then SOFT_DISABLED_BIT was
# set again!!!
cat /proc/cmdline
# 4. Unregister the 'disable_event' command, then:
# 1) SOFT_DISABLED_BIT was cleared again;
# 2) trace_buffered_event_disable() was called second time!!!
echo '!cmdline_proc_show:disable_event:initcall:initcall_finish' > \
set_ftrace_filter
```
To fix it, IIUC, we can change to call trace_buffered_event_enable() at
fist time soft-mode enabled, and call trace_buffered_event_disable() at
last time soft-mode disabled.
Link: https://lore.kernel.org/linux-trace-kernel/20230726095804.920457-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Fixes: 0fc1b09ff1 ("tracing: Use temp buffer when filtering events")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d093282b0 ]
When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set
to 0 in order to make sure any read iterators reset themselves. However,
this will mess 'entries' stating, see following steps:
# cd /sys/kernel/tracing/
# 1. Enlarge ring buffer prepare for later reducing:
# echo 20 > per_cpu/cpu0/buffer_size_kb
# 2. Write a log into ring buffer of cpu0:
# taskset -c 0 echo "hello1" > trace_marker
# 3. Read the log:
# cat per_cpu/cpu0/trace_pipe
<...>-332 [000] ..... 62.406844: tracing_mark_write: hello1
# 4. Stop reading and see the stats, now 0 entries, and 1 event readed:
# cat per_cpu/cpu0/stats
entries: 0
[...]
read events: 1
# 5. Reduce the ring buffer
# echo 7 > per_cpu/cpu0/buffer_size_kb
# 6. Now entries became unexpected 1 because actually no entries!!!
# cat per_cpu/cpu0/stats
entries: 1
[...]
read events: 0
To fix it, introduce 'page_removed' field to count total removed pages
since last reset, then use it to let read iterators reset themselves
instead of changing the 'read' pointer.
Link: https://lore.kernel.org/linux-trace-kernel/20230724054040.3489499-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Fixes: 83f40318da ("ring-buffer: Make removal of ring buffer pages atomic")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fc2febb0f ]
The global function triggers a warning because of the missing prototype
drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes]
263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
There are no other references to this, so just make it static.
Fixes: c4b5b7b6c4 ("pata_ns87415: Initial cut at 87415/87560 IDE support")
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 253e5df8b8 ]
The noswap mount option is surely not one of the three options for sizing:
move its description down.
The huge= mount option does not accept numeric values: those are just in
an internal enum. Delete those numbers, and follow the manpage text more
closely (but there's not yet any fadvise() or fcntl() which applies here).
/sys/kernel/mm/transparent_hugepage/shmem_enabled is hard to describe, and
barely relevant to mounting a tmpfs: just refer to transhuge.rst (while
still using the words deny and force, to help as informal reminders).
[rdunlap@infradead.org: fixup Docs table for huge mount options]
Link: https://lkml.kernel.org/r/20230725052333.26857-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/986cb0bf-9780-354-9bb-4bf57aadbab@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: d0f5a85442 ("shmem: update documentation")
Fixes: 2c6efe9cf2 ("shmem: add support to ignore swap")
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f98a7c0d ]
syzkaller found a race where IOMMUFD_DESTROY increments the refcount:
obj = iommufd_get_object(ucmd->ictx, cmd->id, IOMMUFD_OBJ_ANY);
if (IS_ERR(obj))
return PTR_ERR(obj);
iommufd_ref_to_users(obj);
/* See iommufd_ref_to_users() */
if (!iommufd_object_destroy_user(ucmd->ictx, obj))
As part of the sequence to join the two existing primitives together.
Allowing the refcount the be elevated without holding the destroy_rwsem
violates the assumption that all temporary refcount elevations are
protected by destroy_rwsem. Racing IOMMUFD_DESTROY with
iommufd_object_destroy_user() will cause spurious failures:
WARNING: CPU: 0 PID: 3076 at drivers/iommu/iommufd/device.c:477 iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:478
Modules linked in:
CPU: 0 PID: 3076 Comm: syz-executor.0 Not tainted 6.3.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/03/2023
RIP: 0010:iommufd_access_destroy+0x18/0x20 drivers/iommu/iommufd/device.c:477
Code: e8 3d 4e 00 00 84 c0 74 01 c3 0f 0b c3 0f 1f 44 00 00 f3 0f 1e fa 48 89 fe 48 8b bf a8 00 00 00 e8 1d 4e 00 00 84 c0 74 01 c3 <0f> 0b c3 0f 1f 44 00 00 41 57 41 56 41 55 4c 8d ae d0 00 00 00 41
RSP: 0018:ffffc90003067e08 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff888109ea0300 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00000000ffffffff
RBP: 0000000000000004 R08: 0000000000000000 R09: ffff88810bbb3500
R10: ffff88810bbb3e48 R11: 0000000000000000 R12: ffffc90003067e88
R13: ffffc90003067ea8 R14: ffff888101249800 R15: 00000000fffffffe
FS: 00007ff7254fe6c0(0000) GS:ffff888237c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000555557262da8 CR3: 000000010a6fd000 CR4: 0000000000350ef0
Call Trace:
<TASK>
iommufd_test_create_access drivers/iommu/iommufd/selftest.c:596 [inline]
iommufd_test+0x71c/0xcf0 drivers/iommu/iommufd/selftest.c:813
iommufd_fops_ioctl+0x10f/0x1b0 drivers/iommu/iommufd/main.c:337
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x84/0xc0 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The solution is to not increment the refcount on the IOMMUFD_DESTROY path
at all. Instead use the xa_lock to serialize everything. The refcount
check == 1 and xa_erase can be done under a single critical region. This
avoids the need for any refcount incrementing.
It has the downside that if userspace races destroy with other operations
it will get an EBUSY instead of waiting, but this is kind of racing is
already dangerous.
Fixes: 2ff4bed7fe ("iommufd: File descriptor, context, kconfig and makefiles")
Link: https://lore.kernel.org/r/2-v1-85aacb2af554+bc-iommufd_syz3_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reported-by: syzbot+7574ebfe589049630608@syzkaller.appspotmail.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c0cbd4ebc ]
In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be
triggered.
Fixes: c732a852b4 ("ublk_drv: add START_USER_RECOVERY and END_USER_RECOVERY support")
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53e7d08f6d ]
In ublk_ctrl_start_dev(), if wait_for_completion_interruptible() is
interrupted by signal, queues aren't setup successfully yet, so we
have to fail UBLK_CMD_START_DEV, otherwise kernel oops can be triggered.
Reported by German when working on qemu-storage-deamon which requires
single thread ublk daemon.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Reported-by: German Maglione <gmaglione@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230726144502.566785-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b5d0ddcb3 ]
A fence id of zero is expected to be invalid, and is not removed from
the fence_idr table. If userspace is requesting to specify the fence
id with the FENCE_SN_IN flag, we need to reject a zero fence id value.
Fixes: 17154addc5 ("drm/msm: Add MSM_SUBMIT_FENCE_SN_IN")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/549180/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3bfb25fa2b ]
The op_type field CQ poll info structure is incorrectly
filled in with the queue type as opposed to the op_type
received in the CQEs. The wrong opcode could be decoded
and returned to the ULP.
Copy the op_type field received in the CQE in the CQ poll
info structure.
Fixes: 24419777e9 ("RDMA/irdma: Fix RQ completion opcode")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c01aebeef3 ]
If the second call to amdgpu_bo_create_kernel() fails, the memory
allocated from the first call should be cleared. If the third call
fails, the memory from the second call should be cleared.
Fixes: b95b539168 ("drm/amdgpu/psp: move PSP memory alloc from hw_init to sw_init")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d5fff8982 ]
__md_stop_writes() and __md_stop() will modify many fields that are
protected by 'reconfig_mutex', and all the callers will grab
'reconfig_mutex' except for md_stop().
Also, update md_stop() to make certain 'reconfig_mutex' is held using
lockdep_assert_held().
Fixes: 9d09e663d5 ("dm: raid456 basic support")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e74c874eab ]
There are four equivalent goto tags in raid_ctr(), clean them up to
use just one.
There is no functional change and this is preparation to fix
raid_ctr()'s unprotected md_stop().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Stable-dep-of: 7d5fff8982 ("dm raid: protect md_stop() with 'reconfig_mutex'")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bae3028799 ]
In the error paths 'bad_stripe_cache' and 'bad_check_reshape',
'reconfig_mutex' is still held after raid_ctr() returns.
Fixes: 9dbd1aa3a8 ("dm raid: add reshaping support to the target")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1982655821 ]
The NTLMSSP_NEGOTIATE_VERSION flag only needs to be sent during
the NTLMSSP NEGOTIATE (not the AUTH) request, so filter it out for
NTLMSSP AUTH requests. See MS-NLMP 2.2.1.3
This fixes a problem found by the gssntlmssp server.
Link: https://github.com/gssapi/gss-ntlmssp/issues/95
Fixes: 52d005337b ("smb3: send NTLMSSP version information")
Acked-by: Roy Shterman <roy.shterman@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0933b526f ]
Fix the symbolic names for zone conditions in the blkzoned.h header
file.
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <dlemoal@kernel.org>
Fixes: 6a0cb1bc10 ("block: Implement support for zoned block devices")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230706201422.3987341-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e4c2b6b0c ]
Clear TX registers on stop to prevent the SPDIF interface from sending
last written word over and over again.
Fixes: a2388a498a ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cf67d3cc9 ]
KASAN and KFENCE detected an user-after-free in the CXL driver. This
happens in the cxl_decoder_add() fail path. KASAN prints the following
error:
BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299)
This happens in cxl_parse_cfmws(), where put_device() is called,
releasing cxld, which is accessed later.
Use the local variables in the dev_err() instead of pointing to the
released memory. Since the dev_err() is printing a resource, change the open
coded print format to use the %pr format specifier.
Fixes: e50fe01e1f ("cxl/core: Drop ->platform_res attribute for root decoders")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cd0787f08 ]
In an error path where the submit is free'd without the job being run,
the hw_fence pointer is simply a kzalloc'd block of memory. In this
case we should just kfree() it, rather than trying to decrement it's
reference count. Fortunately we can tell that this is the case by
checking for a zero refcount, since if the job was run, the submit would
be holding a reference to the hw_fence.
Fixes: f94e6a51e1 ("drm/msm: Pre-allocate hw_fence")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/547088/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e8a996563 ]
The msm_gem_get_vaddr() returns an ERR_PTR() on failure, and a null
is catastrophic here, so we should use IS_ERR_OR_NULL() to check
the return value.
Fixes: 6a8bd08d04 ("drm/msm: add sudo flag to submit ioctl")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/547712/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29900bf351 ]
Driver unload hits a hang during stress testing of load/unload.
stack trace snippet -
tasklet_kill at ffffffff9aabb8b2
bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re]
bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re]
bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re]
bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re]
tasklet_kill can hang if the tasklet is scheduled after it is disabled.
Modified the sequences to disable the interrupt first and synchronize
irq before disabling the tasklet.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 354f5bd985 ]
This interface will be used if the driver has not enabled interrupt
and/or interrupt is disabled for a short period of time.
Completion is not possible from interrupt so this interface does
self-polling.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 159cf95e42 ]
- Use __send_message_basic_sanity helper function.
- Do not retry posting same command if there is a queue full detection.
- ENXIO is used to indicate controller recovery.
- In the case of ERR_DEVICE_DETACHED state, the driver should not post
commands to the firmware, but also return fabricated written code.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-9-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65288a22dd ]
Whenever there is a fast path IO and create/destroy resources from
the slow path is happening in parallel, we may notice high latency
of slow path command completion.
Introduces a shadow queue depth to prevent the outstanding requests
to the FW. Driver will not allow more than #RCFW_CMD_NON_BLOCKING_SHADOW_QD
non-blocking commands to the Firmware.
Shadow queue depth is a soft limit only for non-blocking
commands. Blocking commands will be posted to the firmware
as long as there is a free slot.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3022cc1511 ]
Add a check to avoid waiting if driver already detects a
FW timeout. Return success for resource destroy in case
the device is detached. Add helper function to map timeout
error code to success.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf1d12ad5 ]
Use jiffies based timewait instead of counting iteration for
commands that block for FW response.
Also add a poll routine for control path commands. This is for
polling completion if the waiting commands timeout. This avoids cases
where the driver misses completion interrupts.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5bbc65512 ]
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc52aadbc1 ]
Commit 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
introduced a new struct mthca_sqp which doesn't contain struct mthca_qp
any longer. Placing a pointer of this new struct into qptable leads
to crashes, because mthca_poll_one() expects a qp pointer. Fix this
by putting the correct pointer into qptable.
Fixes: 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e15863015 ]
8d037973d4 ("RDMA/core: Refactor rdma_bind_addr") intoduces as regression
on irdma devices on certain tests which uses rdma CM, such as cmtime.
No connections can be established with the MAD QP experiences a fatal
error on the active side.
The cma destination address is not updated with the dst_addr when ULP
on active side calls rdma_bind_addr followed by rdma_resolve_addr.
The id_priv state is 'bound' in resolve_prepare_src and update is skipped.
This leaves the dgid passed into irdma driver to create an Address Handle
(AH) for the MAD QP at 0. The create AH descriptor as well as the ARP cache
entry is invalid and HW throws an asynchronous events as result.
[ 1207.656888] resolve_prepare_src caller: ucma_resolve_addr+0xff/0x170 [rdma_ucm] daddr=200.0.4.28 id_priv->state=7
[....]
[ 1207.680362] ice 0000:07:00.1 rocep7s0f1: caller: irdma_create_ah+0x3e/0x70 [irdma] ah_id=0 arp_idx=0 dest_ip=0.0.0.0
destMAC=00:00:64:ca:b7:52 ipvalid=1 raw=0000:0000:0000:0000:0000:ffff:0000:0000
[ 1207.682077] ice 0000:07:00.1 rocep7s0f1: abnormal ae_id = 0x401 bool qp=1 qp_id = 1, ae_src=5
[ 1207.691657] infiniband rocep7s0f1: Fatal error (1) on MAD QP (1)
Fix this by updating the CMA destination address when the ULP calls
a resolve address with the CM state already bound.
Fixes: 8d037973d4 ("RDMA/core: Refactor rdma_bind_addr")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230712234133.1343-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4984eb5145 ]
On code inspection, there are many instances in the driver where
CEQE and AEQE fields written to by HW are read without guaranteeing
that the polarity bit has been read and checked first.
Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields
prior to checking the polarity bit.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97368254a0 ]
The regulator setup was likely copied from other SoCs by mistake. Just
like SM6125 the DSI PHY on this platform is not getting power from a
regulator but from the MX power domain.
Fixes: 572e9fd6d1 ("drm/msm/dsi: Add phy configuration for QCM2290")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/544536/
Link: https://lore.kernel.org/r/20230627-sm6125-dpu-v2-1-03e430a2078c@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba7a94ea73 ]
Note that with this, DMA4/DMA5 are still non-functional, but at least
display *something* in modetest instead of nothing or underflow.
Fixes: efcd010772 ("drm/msm/dpu: add support for SM8550")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Patchwork: https://patchwork.freedesktop.org/patch/545548/
Link: https://lore.kernel.org/r/20230704160106.26055-1-jonathan@marek.ca
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d64b1ee12a ]
This code is trying to ensure that only the flags specified in the list
are allowed. The problem is that ucmd->rx_hash_fields_mask is a u64 and
the flags are an enum which is treated as a u32 in this context. That
means the test doesn't check whether the highest 32 bits are zero.
Fixes: 4d02ebd9bb ("IB/mlx4: Fix RSS hash fields restrictions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95f41d8781 ]
The commit in Fixes has introduced some "enum p9_session_flags" values
larger than a char.
Such values are stored in "v9fs_session_info->flags" which is a char only.
Turn it into an int so that the "enum p9_session_flags" values can fit in
it.
Fixes: 6deffc8924 ("fs/9p: Add new mount modes")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de52e17326 ]
If tipc_link_bc_create() fails inside tipc_node_create() for a newly
allocated tipc node then we should stop its tipc crypto and free the
resources allocated with a call to tipc_crypto_start().
As the node ref is initialized to one to that point, just put the ref on
tipc_link_bc_create() error case that would lead to tipc_node_free() be
eventually executed and properly clean the node and its crypto resources.
Found by Linux Verification Center (linuxtesting.org).
Fixes: cb8092d70a ("tipc: move bc link creation back to tipc_node_create")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/20230725214628.25246-1-pchelkin@ispras.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
