If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst.
Reported-by: Thiago Becker <tbecker@redhat.com>
Fixes: 1cf9f2a6a5 ("smb: client: handle unlink(2) of files open by different clients")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
rx_packets should report the number of frames successfully received:
unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX
counter) is incorrect and can undercount RX packets. RX drops are
already reported via rx_dropped (e.g. etherStatsDropEvents), so
there is no need to adjust rx_packets.
This patch removes the subtraction of ifOutDiscards from rx_packets
in rtl8365mb_stats_update().
Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions `[Pin]Init::__[pinned_]init` and `ptr::write` called from
the `init!` macro require the passed pointer to be aligned. This fact is
ensured by the creation of field accessors to previously initialized
fields.
Since we missed this very important fact from the beginning [1],
document it in the code.
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Fixes: 90e53c5e70 ("rust: add pin-init API core")
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y: 42415d163e: rust: pin-init: add references to previously initialized fields
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y, 6.18.y, 6.19.y
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260302140424.4097655-2-lossin@kernel.org
[ Updated Cc: stable@ tags as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Gary noticed [1] that the initializer macros as well as the `[Pin]Init`
traits cannot support unaligned fields, since they use operations that
require aligned pointers. This means that any code using structs with
unaligned fields in pin-init is unsound.
By default, the `init!` macro generates references to initialized fields,
which makes the compiler check that those fields are aligned. However,
we added the `#[disable_initialized_field_access]` attribute to avoid
this behavior in commit ceca298c53 ("rust: pin-init: internal: init:
add escape hatch for referencing initialized fields"). Thus remove the
`#[disable_initialized_field_access]` attribute from `init!`, which is
the only safe way to create an initializer handling unaligned fields.
If support for in-place initializing structs with unaligned fields is
required in the future, we could figure out a solution. This is tracked
in [2].
Reported-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Link: https://github.com/Rust-for-Linux/pin-init/issues/112 [2]
Fixes: ceca298c53 ("rust: pin-init: internal: init: add escape hatch for referencing initialized fields")
Signed-off-by: Benno Lossin <lossin@kernel.org>
Acked-by: Janne Grunau <j@jannau.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260302140424.4097655-1-lossin@kernel.org
[ Adjusted tags and reworded as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When building with an out directory (O=), absolute paths can end up in the
file name in `#[track_caller]` or the panic message. This is not desirable
as this leaks the exact path being used to build the kernel and means that
the same location can appear in two forms (relative or absolute).
This is reported by Asahi [1] and is being workaround in [2] previously to
force everything to be absolute path. Using absolute path for everything
solves the inconsistency, however it does not address the reproducibility
issue. So, fix this by remap all absolute paths to srctree to relative path
instead.
This is previously attempted in commit dbdffaf50f ("kbuild, rust: use
-fremap-path-prefix to make paths relative") but that was reverted as
remapping debug info causes some tool (e.g. objdump) to be unable to find
sources. Therefore, use `--remap-path-scope` to only remap macros but leave
debuginfo untouched. `--remap-path-scope` is only stable in Rust 1.95, so
use `rustc-option` to detect its presence. This feature has been available
as `-Zremap-path-scope` for all versions that we support; however due to
bugs in the Rust compiler, it does not work reliably until 1.94. I opted to
not enable it for 1.94 as it's just a single version that we missed.
This change can be validated by building a kernel with O=, strip debug info
on vmlinux, and then check if the absolute path exists in `strings
vmlinux`, e.g. `strings vmlinux |grep \/home`.
Reported-by: Janne Grunau <j@jannau.net>
Reported-by: Asahi Lina <lina+kernel@asahilina.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/Per-call-site.20data.20and.20lock.20class.20keys/near/572466559 [1]
Link: 54ab888788 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Nicolas Schier <nsc@kernel.org> # kbuild
Link: https://patch.msgid.link/20260226152112.3222886-1-gary@kernel.org
[ Reworded for few typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
After commit 295d8398c6 ("kbuild: specify output names separately for
each emission type from rustc"), the preferred pattern is to ask rustc to
emit dependency information into $(depfile) directly, and after commit
2185242fad ("kbuild: remove sed commands after rustc rules"), the
post-processing to remove comments is no longer necessary as fixdep can
handle comments directly. Thus, emit dep-info into $(depfile) directly and
remove the mv and sed invocation.
This fixes the issue where a non-ignored .d file is emitted during
compilation and removed shortly afterwards.
[ Like Gary mentioned in Zulip, this likely happened due to rebasing
the builds part of the old `syn` work I had. - Miguel ]
Reported-by: Onur Özkan <work@onurozkan.dev>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/syn.20artifact.20being.20tracked.20by.20git/with/575467879
Fixes: 7dbe46c0b1 ("rust: kbuild: add proc macro library support")
Signed-off-by: Gary Guo <gary@garyguo.net>
Tested-by: Onur Özkan <work@onurozkan.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260224072957.214979-1-gary@garyguo.net
[ Reworded for a couple of typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The hardware revision for TSMC 3nm-based Qualcomm SOCs should be 7.2,
this can be confirmed from REG_DSI_7nm_PHY_CMN_REVISION_ID0, the value
is 0x27, which means hardware revision is 7.2
No functional change.
Fixes: 1337d7ebfb ("drm/msm/dsi/phy: Add support for SM8750")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707414/
Link: https://lore.kernel.org/r/20260226122958.22555-2-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Glymur platform has four DisplayPort controllers. The hardware
supports four streams (MST) per controller. However, on Glymur the first
three controllers only have two streams wired to the display subsystem,
while the fourth controller operates in single-stream mode.
Add a dedicated clause for the Glymur compatible to require the register
ranges for all four stream blocks, while allowing either one pixel clock
(for the single-stream controller) or two pixel clocks (for the remaining
controllers).
Update the Glymur MDSS schema example by adding the missing p2, p3,
mst2link and mst3link register blocks. Without these, the bindings
validation fails. Also replace the made-up register addresses with the
actual addresses from the first controller to match the SoC devicetree
description.
Cc: stable@vger.kernel.org # v6.19
Fixes: 8f63bf9082 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
Fixes: 1aee577bbc ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708518/
Link: https://lore.kernel.org/r/20260303-glymur-fix-dp-bindings-reg-clocks-v4-1-1ebd9c7c2cee@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
To disable l2/l3 swizzling in A8x, set the respective bits in both
GRAS_NC_MODE_CNTL and RB_CCU_NC_MODE_CNTL registers. This is required
for Glymur where it is recommended to keep l2/l3 swizzling disabled.
Fixes: 288a932008 ("drm/msm/adreno: Introduce A8x GPU Support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Message-ID: <20260305-a8xx-ubwc-fix-v1-1-d99b6da4c5a9@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the
IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and
part of a field (bits 3:0) on the u85. The driver was hardcoded to the
u85.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-2-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
If the job submit fails before adding the job to the scheduler queue
such as when the GEM buffer bounds checks fail, then doing a
ethosu_job_put() results in a pm_runtime_put_autosuspend() without the
corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are
also unnecessary, but seem to be harmless.
Split the ethosu_job_cleanup() function into 2 parts for the before
and after the job is queued.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such scftorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-4-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such refscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-3-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcuscale scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260303235903.1967409-2-paulmck@kernel.org
As of v7.0-rc1, architectures that support preemption, including x86 and
arm64, no longer support CONFIG_PREEMPT_NONE or CONFIG_PREEMPT_VOLUNTARY.
Attempting to build kernels with these two Kconfig options results in
.config errors. This commit therefore switches such rcutorture scenarios
to CONFIG_PREEMPT_LAZY.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/bfe89f6c-3b63-40c6-aa6d-5f523e3e9a31@paulmck-laptop
To get the comment changes in this commit:
171efc7009 ("x86/ibs: Fix typo in dc_l2tlb_miss comment")
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/amd/ibs.h arch/x86/include/asm/amd/ibs.h
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking up the changes from these csets:
2153b2e891 ("sparc: Add architecture support for clone3")
99d2592023 ("rseq: Implement sys_rseq_slice_yield()")
4ac286c4a8 ("s390/syscalls: Switch to generic system call table generation")
This makes 'perf trace' support it, now its possible, for instance, to
do:
# perf trace -e rseq_slice_yield --max-stack=16
Here is an example with the 'sendmmsg' syscall:
root@x1:~# perf trace -e sendmmsg --max-stack 16 --max-events=1
0.000 ( 0.062 ms): dbus-broker/1012 sendmmsg(fd: 150, mmsg: 0x7ffef57cca50, vlen: 1, flags: DONTWAIT|NOSIGNAL) = 1
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode_prepare ([kernel.kallsyms])
syscall_exit_to_user_mode ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64 ([kernel.kallsyms])
[0x117ce7] (/usr/lib64/libc.so.6 (deleted))
root@x1:~#
To do a system wide tracing of the new 'rseq_slice_yield' syscall with a
backtrace of at most 16 entries.
This addresses these perf tools build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ludwig Rydberg <ludwig.rydberg@gaisler.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prevent CONFIG_FS_VERITY from being enabled when the page size is 256K,
since it doesn't work in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaaj+ThQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9PdAP0bl5KEYBjtUmgg4Olv+GOLegWCZRsq
WvGJgIUDDZQfyAEAta6nN5CZ4LbngtWtPsNWVihyoaME2b7yrF/kz7l07g8=
=/rYw
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity fix from Eric Biggers:
"Prevent CONFIG_FS_VERITY from being enabled when the page size is
256K, since it doesn't work in that case"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: add dependency on 64K or smaller pages
If a branch target points to one past the end of a function, the branch
should be treated as a branch to another function.
This can happen e.g. with a tail call to a function that is laid out
immediately after the caller.
Fixes: 751b1783da ("perf annotate: Mark jumps to outher functions with the call arrow")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://linux-review.googlesource.com/id/Ide471112e82d68177e0faf08ca411d9fcf0a7bdf
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs.
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code.
- Add a kunitconfig file for lib/crypto/.
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib".
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaaj9YRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOKyFZAP0b6KbEjGnQGE00nh6ChNrWs8RgyNx9
y+gtR2EMKnUf1wEA/q/VBPl5UgO3z4TrmJuSrpyMLzz+/XwUGJHKPEqTtwU=
=iJZE
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fixes from Eric Biggers:
- Several test fixes:
- Fix flakiness in the interrupt context tests in certain VMs
- Make the lib/crypto/ KUnit tests depend on the corresponding
library options rather than selecting them. This follows the
standard KUnit convention, and it fixes an issue where enabling
CONFIG_KUNIT_ALL_TESTS pulled in all the crypto library code
- Add a kunitconfig file for lib/crypto/
- Fix a couple stale references to "aes-generic" that made it in
concurrently with the rename to "aes-lib"
- Update the help text for several CRYPTO kconfig options to remove
outdated information about users that now use the library instead
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Fix stale references to aes-generic
crypto: Clean up help text for CRYPTO_CRC32
crypto: Clean up help text for CRYPTO_CRC32C
crypto: Clean up help text for CRYPTO_XXHASH
crypto: Clean up help text for CRYPTO_SHA256
crypto: Clean up help text for CRYPTO_BLAKE2B
lib/crypto: tests: Add a .kunitconfig file
lib/crypto: tests: Depend on library options rather than selecting them
kunit: irq: Ensure timer doesn't fire too frequently
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmmpxGcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1JK0H/0/nuSCYO/mtbdS9fwRsXrSd+Yphlkij
F+mF9NQx5HPzW4PbHT4erqQe02Kohyb40t57C+4LiaenbKXftPbmgO+d5RvN1AkK
L78f/pdxhpsN/MisUl466UgFwPiuv4XnMSrF9VpZAF16g4zqwWpyvZ0Z3qp0a1LW
3zBPl3Jag37lnKqCaPti/84R15uxn2wMpTGeaNZGNdG6lJwKCAVhKy3bvSp+6iQ6
QMUao6bWSCT2qq0kNWBxfWhrYhAYz3lCyu1qlSumB7qBt51eEXEmTW7O38DIDXMb
fVjlsNFDntIJl2vXn9zyM5kbOnpZ7EiOytKNli/LcxqtrY/PUWNQU6Y=
=CEPs
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support fixes from Rafael Wysocki:
- Revert a commit related to ACPI device power management that was
not supposed to make any functional difference, but it did so and
introduced a regression (Rafael Wysocki)
- Update the _CPC object definition in ACPICA to match ACPI 6.6 and
prevent the kernel from printing a false-positive warning regarding
_CPC output package format on platforms shipping with firmware based
on ACPI 6.6 (Saket Dumbre)
* tag 'acpi-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: PM: Let acpi_dev_pm_attach() skip devices without ACPI PM"
ACPICA: Update the _CPC definition to match ACPI 6.6
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched: fq: clear q->band_pkt_count[] in fq_reset()
- sched: only allow act_ct to bind to clsact/ingress qdiscs and
shared blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XGBM
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Merge a fix updating the _CPC object definition in ACPICA to avoid
printing a false-positive output package format warning on new
platforms (Saket Dumbre)
* acpica:
ACPICA: Update the _CPC definition to match ACPI 6.6
Email to Joyce Ooi <joyce.ooi@intel.com> now bounces. Remove the address
and mark the Altera PCIe controller driver as an orphan for now.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260305171852.3114177-1-dave.hansen@linux.intel.com
Add a sample module under samples/workqueue/stall_detector/ that
reproduces a workqueue stall caused by PF_WQ_WORKER misuse. The
module queues two work items on the same per-CPU pool, then clears
PF_WQ_WORKER and sleeps in wait_event_idle(), hiding from the
concurrency manager and stalling the second work item indefinitely.
This is useful for testing the workqueue watchdog stall diagnostics.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
show_cpu_pool_hog() only prints workers whose task is currently running
on the CPU (task_is_running()). This misses workers that are busy
processing a work item but are sleeping or blocked — for example, a
worker that clears PF_WQ_WORKER and enters wait_event_idle(). Such a
worker still occupies a pool slot and prevents progress, yet produces
an empty backtrace section in the watchdog output.
This is happening on real arm64 systems, where
toggle_allocation_gate() IPIs every single CPU in the machine (which
lacks NMI), causing workqueue stalls that show empty backtraces because
toggle_allocation_gate() is sleeping in wait_event_idle().
Remove the task_is_running() filter so every in-flight worker in the
pool's busy_hash is dumped. The busy_hash is protected by pool->lock,
which is already held.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
When diagnosing workqueue stalls, knowing how long each in-flight work
item has been executing is valuable. Add a current_start timestamp
(jiffies) to struct worker, set it when a work item begins execution in
process_one_work(), and print the elapsed wall-clock time in show_pwq().
Unlike current_at (which tracks CPU runtime and resets on wakeup for
CPU-intensive detection), current_start is never reset because the
diagnostic cares about total wall-clock time including sleeps.
Before: in-flight: 165:stall_work_fn [wq_stall]
After: in-flight: 165:stall_work_fn [wq_stall] for 100s
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The watchdog_ts name doesn't convey what the timestamp actually tracks.
This field tracks the last time a workqueue got progress.
Rename it to last_progress_ts to make it clear that it records when the
pool last made forward progress (started processing new work items).
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
pr_cont_worker_id() checks pool->flags against WQ_BH, which is a
workqueue-level flag (defined in workqueue.h). Pool flags use a
separate namespace with POOL_* constants (defined in workqueue.c).
The correct constant is POOL_BH. Both WQ_BH and POOL_BH are defined
as (1 << 0) so this has no behavioral impact, but it is semantically
wrong and inconsistent with every other pool-level BH check in the
file.
Fixes: 4cb1ef6460 ("workqueue: Implement BH workqueues to eventually replace tasklets")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
The management channel used for firmware control command submission is
currently created after the firmware is started. If channel creation
fails (for example, due to memory allocation failure or workqueue
creation interruption), the firmware remains in a pending state and is
unable to receive any control commands.
To avoid leaving the firmware in this inconsistent state, split
xdna_mailbox_create_channel() into two separate functions so that
resource allocation can be completed before interacting with the
hardware.
xdna_mailbox_alloc_channel()
Allocates memory and initializes the workqueue. This can be called
earlier, before interacting with the hardware.
xdna_mailbox_start_channel()
Performs the hardware interaction required to start the channel.
Rename xdna_mailbox_destroy_channel() to xdna_mailbox_free_channel().
Ensure that xdna_mailbox_stop_channel() and xdna_mailbox_free_channel()
properly unwind the corresponding start and allocation steps, respectively.
Fixes: b87f920b93 ("accel/amdxdna: Support hardware mailbox")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260305062041.3954024-1-lizhi.hou@amd.com
Smatch reports unreachable code in imx_rproc_prepare(), where an early
return inside the reserved-memory parsing loop prevents platform
prepare_ops from being executed.
When of_reserved_mem_region_to_resource() fails, imx_rproc_prepare()
returns immediately, so the platform-specific prepare callback is never
called. As a result, prepare_ops such as imx_rproc_sm_lmm_prepare() on
i.MX95 have no chance to run.
This is problematic when Linux controls the M7 Logical Machine and is
responsible for preparing resources such as TCM. Without running the
platform prepare callback, loading the M7 ELF into TCM may fail if the
bootloader did not power up and initialize TCM.
Fix this by breaking out of the reserved-memory loop instead of
returning, allowing the platform prepare_ops to be executed as intended.
Fixes: edd2a99560 ("remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-remoteproc/aYYXAa2Fj36XG4yQ@p14s/T/#t
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260208-imx-rproc-fix-v1-1-ad74555eb9a4@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Prior to commit d935187cfb ("remoteproc: mediatek: Break lock
dependency to prepare_lock"), `scp->clk` was prepared and enabled only
when it needs to communicate with the SCP. The commit d935187cfb
moved the prepare operation to remoteproc's prepare(), keeping the clock
prepared as long as the SCP is running.
The power consumption due to the prolonged clock preparation can be
negligible when the system is running, as SCP is designed to be a very
power efficient processor.
However, the clock remains prepared even when the system enters system
suspend. This prevents the underlying clock controller (and potentially
the parent PLLs) from shutting down, which increases power consumption
and may block the system from entering deep sleep states.
Add suspend and resume callbacks. Unprepare the clock in suspend() if
it was active and re-prepare it in resume() to ensure the clock is
properly disabled during system suspend, while maintaining the "always
prepared" semantics while the system is active. The driver doesn't
implement .attach() callback, hence it only checks for RPROC_RUNNING.
Fixes: d935187cfb ("remoteproc: mediatek: Break lock dependency to prepare_lock")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260206033034.3031781-1-tzungbi@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This commit corrects the order of arguments passed to panthor_gem_sync()
function, called when the SYNC_WAIT condition has to be evaluated for a
blocked GPU queue.
Fixes: cd2c9c3015 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260305110723.2871733-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Fix an error reported by the kernel test robot:
au1100fb.c: error: implicit declaration of function 'KSEG1ADDR'; did you mean 'CKSEG1ADDR'?
arch/mips/include/asm/addrspace.h defines KSEG1ADDR only for 32 bit
configurations. So provide its compile-test stub also for 64bit mips builds.
Fixes: 6f366e8648 ("fbdev: au1100fb: Make driver compilable on non-mips platforms")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603042127.PT6LuKqi-lkp@intel.com/
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
When a guest performs an atomic/exclusive operation on memory lacking
the required attributes, user_mem_abort() injects a data abort and
returns early. However, it fails to release the reference to the
host page acquired via __kvm_faultin_pfn().
A malicious guest could repeatedly trigger this fault, leaking host
page references and eventually causing host memory exhaustion (OOM).
Fix this by consolidating the early error returns to a new out_put_page
label that correctly calls kvm_release_page_unused().
Fixes: 2937aeec9d ("KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Yuan Yao <yaoyuan@linux.alibaba.com>
Link: https://patch.msgid.link/20260304162222.836152-2-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
A moderately large pile of fixes, though none of them are super major,
plus a few new quirks and device IDs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmpqoUACgkQJNaLcl1U
h9BTHQf+MnXcY+kp+Ou9SsrMyrZE7htz3tbjF1SLSAyZeM7OysDVPiHnx2qkDT4N
gM/I3lTmF3nyK2CN0aKvTcUQml0Hdjs3lEDO59uIeBI6SK7tcrQQkh74N2EI4UgH
rbLusOWMGIoUONXZQNns0zpYx8W562SgcW3O6ZW3cRJo6rwKd1UPlM6ywgPtYC+j
Eb7MPjaz1Q2+IReQ6ewOD68k07PWB7cyYjqlQj/v2GT09MFP5uDmOIw82igsqw+Z
af7yKDbg7QNCGgYYu3OT5l/zGBm1CqDMxvgUNtf9d2MN9+hjyI2i3ZtzvDNj6cAl
IUBgqZXE/Tf2tJIMIK77fSFJBYWNGw==
=v+Al
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.0-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
A moderately large pile of fixes, though none of them are super major,
plus a few new quirks and device IDs.
The task ownership state machine in sched_ext is quite hard to follow
from the code alone. The interaction of ownership states, memory
ordering rules and cross-CPU "lock dancing" makes the overall model
subtle.
Extend the documentation next to scx_ops_state to provide a more
structured and self-contained description of the state transitions and
their synchronization rules.
The new reference should make the code easier to reason about and
maintain and can help future contributors understand the overall
task-ownership workflow.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
bypass_lb_cpu() reads scx_bypass_lb_intv_us and scx_slice_bypass_us
without holding any lock, in timer callback context where module
parameter writes via sysfs can happen concurrently:
min_delta_us = scx_bypass_lb_intv_us / SCX_BYPASS_LB_MIN_DELTA_DIV;
^^^^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
if (delta < DIV_ROUND_UP(min_delta_us, scx_slice_bypass_us))
^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
scx_bypass_lb_intv_us already uses READ_ONCE() in scx_bypass_lb_timerfn()
and scx_bypass() for its other lock-free read sites, leaving
bypass_lb_cpu() inconsistent. scx_slice_bypass_us has the same
lock-free access pattern in the same function.
Fix both plain reads by using READ_ONCE() to complete the concurrent
access annotation and make the code KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what functions
to ignore. The trace_graph_return() was updated to handle this, but
when function_graph tracer is using a threshold (only trace functions
that took longer than a specified time), it uses
trace_graph_thresh_return() instead. This function was still incorrectly
using the task struct recursion word causing the function graph tracer to
permanently set all functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of being
on the fgraph descriptor, the calculations for the amount of sleep time
was updated. The calculation was done in the trace_graph_thresh_return()
function, which also called the trace_graph_return(), which did the
calculation again, causing the time to be doubled.
Remove the call to trace_graph_return() as what it needed to do wasn't
that much, and just do the work in trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the raw_syscall
tracepoints. When the first syscall event is enabled, it enables the
raw_syscall tracepoint and doesn't need to do anything when a second
syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init.
This is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different
types of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled. The problem happened is that this
"disable-enable" is done one at a time. If more than one syscall event
is specified on the command line, by disabling them one at a time,
the counter never gets to zero, and the raw_syscall is not disabled and
enabled, keeping the syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will ensure
the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables protected
by RCU (preemption disabled). Now that tracepoint callbacks are called with
preemption enabled, this protection needs to be added explicitly, and
not depend on the functions being called with preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY. But
this does not prevent the application from calling madvise(MADVISE_DOFORK).
This causes the mapping to be copied on fork. After the first tasks exits,
the mapping is considered unmapped by everyone. But when he second task
exits, the counter goes below zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace ring
buffer (although two mappings may mess each other up), there's no reason
to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get all
*ftrace* files.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaamiIBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qulnAP9ZO6iChQL0hX/Xuu2VyRhVz0Svf8Sg
iq2IUHP48twOogEApR4zeelMORxdKqkLR+BajZUVFR1PukVbMaszPr9GoQw=
=H9pj
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
Larysa Zaremba says:
====================
Address XDP frags having negative tailroom
Aside from the issue described below, tailroom calculation does not account
for pages being split between frags, e.g. in i40e, enetc and
AF_XDP ZC with smaller chunks. These series address the problem by
calculating modulo (skb_frag_off() % rxq->frag_size) in order to get
data offset within a smaller block of memory. Please note, xskxceiver
tail grow test passes without modulo e.g. in xdpdrv mode on i40e,
because there is not enough descriptors to get to flipped buffers.
Many ethernet drivers report xdp Rx queue frag size as being the same as
DMA write size. However, the only user of this field, namely
bpf_xdp_frags_increase_tail(), clearly expects a truesize.
Such difference leads to unspecific memory corruption issues under certain
circumstances, e.g. in ixgbevf maximum DMA write size is 3 KB, so when
running xskxceiver's XDP_ADJUST_TAIL_GROW_MULTI_BUFF, 6K packet fully uses
all DMA-writable space in 2 buffers. This would be fine, if only
rxq->frag_size was properly set to 4K, but value of 3K results in a
negative tailroom, because there is a non-zero page offset.
We are supposed to return -EINVAL and be done with it in such case,
but due to tailroom being stored as an unsigned int, it is reported to be
somewhere near UINT_MAX, resulting in a tail being grown, even if the
requested offset is too much(it is around 2K in the abovementioned test).
This later leads to all kinds of unspecific calltraces.
[ 7340.337579] xskxceiver[1440]: segfault at 1da718 ip 00007f4161aeac9d sp 00007f41615a6a00 error 6
[ 7340.338040] xskxceiver[1441]: segfault at 7f410000000b ip 00000000004042b5 sp 00007f415bffecf0 error 4
[ 7340.338179] in libc.so.6[61c9d,7f4161aaf000+160000]
[ 7340.339230] in xskxceiver[42b5,400000+69000]
[ 7340.340300] likely on CPU 6 (core 0, socket 6)
[ 7340.340302] Code: ff ff 01 e9 f4 fe ff ff 0f 1f 44 00 00 4c 39 f0 74 73 31 c0 ba 01 00 00 00 f0 0f b1 17 0f 85 ba 00 00 00 49 8b 87 88 00 00 00 <4c> 89 70 08 eb cc 0f 1f 44 00 00 48 8d bd f0 fe ff ff 89 85 ec fe
[ 7340.340888] likely on CPU 3 (core 0, socket 3)
[ 7340.345088] Code: 00 00 00 ba 00 00 00 00 be 00 00 00 00 89 c7 e8 31 ca ff ff 89 45 ec 8b 45 ec 85 c0 78 07 b8 00 00 00 00 eb 46 e8 0b c8 ff ff <8b> 00 83 f8 69 74 24 e8 ff c7 ff ff 8b 00 83 f8 0b 74 18 e8 f3 c7
[ 7340.404334] Oops: general protection fault, probably for non-canonical address 0x6d255010bdffc: 0000 [#1] SMP NOPTI
[ 7340.405972] CPU: 7 UID: 0 PID: 1439 Comm: xskxceiver Not tainted 6.19.0-rc1+ #21 PREEMPT(lazy)
[ 7340.408006] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-5.fc42 04/01/2014
[ 7340.409716] RIP: 0010:lookup_swap_cgroup_id+0x44/0x80
[ 7340.410455] Code: 83 f8 1c 73 39 48 ba ff ff ff ff ff ff ff 03 48 8b 04 c5 20 55 fa bd 48 21 d1 48 89 ca 83 e1 01 48 d1 ea c1 e1 04 48 8d 04 90 <8b> 00 48 83 c4 10 d3 e8 c3 cc cc cc cc 31 c0 e9 98 b7 dd 00 48 89
[ 7340.412787] RSP: 0018:ffffcc5c04f7f6d0 EFLAGS: 00010202
[ 7340.413494] RAX: 0006d255010bdffc RBX: ffff891f477895a8 RCX: 0000000000000010
[ 7340.414431] RDX: 0001c17e3fffffff RSI: 00fa070000000000 RDI: 000382fc7fffffff
[ 7340.415354] RBP: 00fa070000000000 R08: ffffcc5c04f7f8f8 R09: ffffcc5c04f7f7d0
[ 7340.416283] R10: ffff891f4c1a7000 R11: ffffcc5c04f7f9c8 R12: ffffcc5c04f7f7d0
[ 7340.417218] R13: 03ffffffffffffff R14: 00fa06fffffffe00 R15: ffff891f47789500
[ 7340.418229] FS: 0000000000000000(0000) GS:ffff891ffdfaa000(0000) knlGS:0000000000000000
[ 7340.419489] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7340.420286] CR2: 00007f415bfffd58 CR3: 0000000103f03002 CR4: 0000000000772ef0
[ 7340.421237] PKRU: 55555554
[ 7340.421623] Call Trace:
[ 7340.421987] <TASK>
[ 7340.422309] ? softleaf_from_pte+0x77/0xa0
[ 7340.422855] swap_pte_batch+0xa7/0x290
[ 7340.423363] zap_nonpresent_ptes.constprop.0.isra.0+0xd1/0x270
[ 7340.424102] zap_pte_range+0x281/0x580
[ 7340.424607] zap_pmd_range.isra.0+0xc9/0x240
[ 7340.425177] unmap_page_range+0x24d/0x420
[ 7340.425714] unmap_vmas+0xa1/0x180
[ 7340.426185] exit_mmap+0xe1/0x3b0
[ 7340.426644] __mmput+0x41/0x150
[ 7340.427098] exit_mm+0xb1/0x110
[ 7340.427539] do_exit+0x1b2/0x460
[ 7340.427992] do_group_exit+0x2d/0xc0
[ 7340.428477] get_signal+0x79d/0x7e0
[ 7340.428957] arch_do_signal_or_restart+0x34/0x100
[ 7340.429571] exit_to_user_mode_loop+0x8e/0x4c0
[ 7340.430159] do_syscall_64+0x188/0x6b0
[ 7340.430672] ? __do_sys_clone3+0xd9/0x120
[ 7340.431212] ? switch_fpu_return+0x4e/0xd0
[ 7340.431761] ? arch_exit_to_user_mode_prepare.isra.0+0xa1/0xc0
[ 7340.432498] ? do_syscall_64+0xbb/0x6b0
[ 7340.433015] ? __handle_mm_fault+0x445/0x690
[ 7340.433582] ? count_memcg_events+0xd6/0x210
[ 7340.434151] ? handle_mm_fault+0x212/0x340
[ 7340.434697] ? do_user_addr_fault+0x2b4/0x7b0
[ 7340.435271] ? clear_bhb_loop+0x30/0x80
[ 7340.435788] ? clear_bhb_loop+0x30/0x80
[ 7340.436299] ? clear_bhb_loop+0x30/0x80
[ 7340.436812] ? clear_bhb_loop+0x30/0x80
[ 7340.437323] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 7340.437973] RIP: 0033:0x7f4161b14169
[ 7340.438468] Code: Unable to access opcode bytes at 0x7f4161b1413f.
[ 7340.439242] RSP: 002b:00007ffc6ebfa770 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
[ 7340.440173] RAX: fffffffffffffe00 RBX: 00000000000005a1 RCX: 00007f4161b14169
[ 7340.441061] RDX: 00000000000005a1 RSI: 0000000000000109 RDI: 00007f415bfff990
[ 7340.441943] RBP: 00007ffc6ebfa7a0 R08: 0000000000000000 R09: 00000000ffffffff
[ 7340.442824] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 7340.443707] R13: 0000000000000000 R14: 00007f415bfff990 R15: 00007f415bfff6c0
[ 7340.444586] </TASK>
[ 7340.444922] Modules linked in: rfkill intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit libnvdimm kvm_intel vfat fat kvm snd_pcm irqbypass rapl iTCO_wdt snd_timer intel_pmc_bxt iTCO_vendor_support snd ixgbevf virtio_net soundcore i2c_i801 pcspkr libeth_xdp net_failover i2c_smbus lpc_ich failover libeth virtio_balloon joydev 9p fuse loop zram lz4hc_compress lz4_compress 9pnet_virtio 9pnet netfs ghash_clmulni_intel serio_raw qemu_fw_cfg
[ 7340.449650] ---[ end trace 0000000000000000 ]---
The issue can be fixed in all in-tree drivers, but we cannot just trust OOT
drivers to not do this. Therefore, make tailroom a signed int and produce a
warning when it is negative to prevent such mistakes in the future.
The issue can also be easily reproduced with ice driver, by applying
the following diff to xskxceiver and enjoying a kernel panic in xdpdrv mode:
diff --git a/tools/testing/selftests/bpf/prog_tests/test_xsk.c b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
index 5af28f359cfd..042d587fa7ef 100644
--- a/tools/testing/selftests/bpf/prog_tests/test_xsk.c
+++ b/tools/testing/selftests/bpf/prog_tests/test_xsk.c
@@ -2541,8 +2541,8 @@ int testapp_adjust_tail_grow_mb(struct test_spec *test)
{
test->mtu = MAX_ETH_JUMBO_SIZE;
/* Grow by (frag_size - last_frag_Size) - 1 to stay inside the last fragment */
- return testapp_adjust_tail(test, (XSK_UMEM__MAX_FRAME_SIZE / 2) - 1,
- XSK_UMEM__LARGE_FRAME_SIZE * 2);
+ return testapp_adjust_tail(test, XSK_UMEM__MAX_FRAME_SIZE * 100,
+ 6912);
}
int testapp_tx_queue_consumer(struct test_spec *test)
If we print out the values involved in the tailroom calculation:
tailroom = rxq->frag_size - skb_frag_size(frag) - skb_frag_off(frag);
4294967040 = 3456 - 3456 - 256
I personally reproduced and verified the issue in ice and i40e,
aside from WiP ixgbevf implementation.
====================
Link: https://patch.msgid.link/20260305111253.2317394-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects truesize instead of DMA
write size. Different assumptions in enetc driver configuration lead to
negative tailroom.
Set frag_size to the same value as frame_sz.
Fixes: 2768b2e2f7 ("net: enetc: register XDP RX queues with frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-9-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in idpf driver configuration lead
to negative tailroom.
To make it worse, buffer sizes are not actually uniform in idpf when
splitq is enabled, as there are several buffer queues, so rxq->rx_buf_size
is meaningless in this case.
Use truesize of the first bufq in AF_XDP ZC, as there is only one. Disable
growing tail for regular splitq.
Fixes: ac8a861f63 ("idpf: prepare structures to support XDP")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-8-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buffer size instead
of DMA write size. Different assumptions in i40e driver configuration lead
to negative tailroom.
Set frag_size to the same value as frame_sz in shared pages mode, use new
helper to set frag_size when AF_XDP ZC is active.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-7-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current way of handling XDP RxQ info in i40e has a problem, where frag_size
is not updated when xsk_buff_pool is detached or when MTU is changed, this
leads to growing tail always failing for multi-buffer packets.
Couple XDP RxQ info registering with buffer allocations and unregistering
with cleaning the ring.
Fixes: a045d2f2d0 ("i40e: set xdp_rxq_info::frag_size")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-6-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper.
Fixes: 2fba7dc515 ("ice: Add support for XDP multi-buffer on Rx side")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20260305111253.2317394-5-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
