[Why/How]
1. DPMM also needs to consider the per-DPM derate when calculating the
clocks
that will be used by mode programming.
Otherwise DPMM calculations can result in rounding up to the next DPM
anyways.
clk index value used by mode support is not reliable when trying to
determine the actual
per-dpm derate.
2. Also update how per-dpm derates are stored so each derate applies until
an upper bound.
Upperbound of 0 signifies this derate is used for the remaining DPMs.
To simplify logic, all derates for all clocks should have the same number
of entries
and the last entry should have an upperbound of 0.
3. Deprecate system_active_average derates from the derate table and move
them to the per-DPM structure
The remaining derates (urgent, dcn_mall, system idle) are unchanged
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Make dcn42_ddr5_power_management_parameters struct static to avoid
having multiple declarations of the structure
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The OutstandingRequestsSupport check fails a mode when the
outstanding-request
buffer window (max_outstanding_reqs * request_size / (DCFCLK *
return_bus_width))
is shorter than the average urgent request latency. Because DCFCLK is
derived
from the SOP's bandwidth, a higher-bandwidth SOP raises DCFCLK, shrinks
that
window, and perversely makes the mode unsupported - so "too much bandwidth"
becomes a failure reason, which defies common sense.
When the ROB size / request limit is not yet fixed, the
SOP bandwidth/latency values are tuned to a family maximum and the check
mis-fires. Add a per-display-config override
outstanding_requests_check_disable
(overrides.hw, matching the existing *_check_disable idiom) that early-outs
the
dcn6 check with both flags left supported. Default off, so existing
behavior is
unchanged. Also wire the flag through the DML JSON translation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Hubp pointer is not initialized for older asics.
[how]
Use mpcc_id field from plane resources instead of instance number
by dereferencing hupb pointer.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Add event to wait stream regen flag.
Reviewed-by: Leon Huang <leon.huang1@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Pipe_ctx shouldn't be passed as block sequence block parameter.
[how]
Precalculate delay during building stage instead during execution.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Z8 Retention requires clocks to be put into bypass for the PLL
to be powered down.
Notify DMU of the DPM0 clock values, which is likely always going
to be running of a bypass clock.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Allowing the DCHVM<->rIOMMU SDP port to disconnect during IPS1 cycling
can cause extra credits
to be released to rIOMMU. In turn, this will let the rIOMMU issue more
outstanding table walk requests
at once, overflowing the downstream request FIFO. This results in
dropped/orphaned
requests with no method of recovery. This typically manifests as an
invalidation hang error
in the main IOMMU.
As a workaround, dis-allow the SDP port from disconnecting from IPS1 exit
up until after
powerstatus=1. This ensures that rIOMMU does not have the chance to request
credits multiple
times during the powerstatus 0->1 transition.
Since x86 driver cannot access rIOMMU register space, send a command to DMU
to do it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Expose whether the ASIC supports Universal Traffic Management so
upper layers can query the capability instead of assuming support.
[How]
Add a new bool capability field to dc_caps, defaulting to false,
and set it to true during DCN6 resource construction.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Some legacy DCE functions were carried over to DCN10 and later. These
functions are now renamed to remove the DCE prefix and be more generic.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The UTM QoS model population indexed into a firmware-provided
table without checking whether it reported any load levels or
SOPs, leaving a malformed table treated as valid instead of absent.
[How]
Bail out early and clear the output model pointer when the load
level count or SOP count is zero.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
In the future, DC will off-load block-level initialization to DMUB.
In preparation, update dmub_cmd.h with the command for better tracking.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The CRTC state in the amdgpu_dm_crtc_get_cursor_mode() tests is
zero-initialised, so base.enable is false in all of them. Nothing in the
function reads it today, so they pass, but they are not describing the
case they mean to describe: each one is meant to exercise an enabled CRTC
driving real planes.
[how]
Set base.enable in the shared fixture, and in the no_change test which
builds its own CRTC state instead of using the fixture. No functional
change, since the function does not look at base.enable yet.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Upstream has no KUnit coverage for amdgpu_dm_crtc_get_cursor_mode(),
which is why the fix in the previous commit came with no test. The
disabled-CRTC path is easy to regress again: it has already been lost
once to a refactor.
[how]
Add a test whose plane setup would otherwise select overlay mode, and
check that a disabled CRTC still reports native mode. Reverting the
previous commit makes only this test fail.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Periodic interrupt line calculations depends on stream and pipe state, not
ASIC-specific register programming. Keeping it in the DCN10 implementation
also prevents block-sequence callers from carrying fully resolved
parameters.
We want HWSS block parameters to not include complex structures like
pipe_ctx.
[how]
- Move the vertical interrupt line calculation into common HWSS code.
- Update the periodic interrupt callback.
- Calculate the values before direct or block-sequence execution.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Tomasz Siemek <tomasz.siemek@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IGT test cases for CACP need a way to validate that the ACE
(Adaptive Contrast Enhancement) curve responds to the CACP
aggression level. No interface exists to read the resulting
curve back from firmware for automated validation.
[How]
Add a read-only "cacp_ace_curve_area" debugfs node on eDP
connectors that support CACP. It issues a
DMUB_CMD__CACP_GET_ACE_CURVE_AREA command and reports the area
under the ACE PWL curve returned by firmware, which is directly
comparable across CACP levels, so IGT tests can query it per panel.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG 5_0_2 has 2 instances per die. Each instance has 10 rings.
Each ring consuming a unique VM invalidation engine exhausts the
available engines per MMHUB.
All rings within a JPEG instance can safely share one engine since
MMHUB serializes concurrent invalidation requests via hardware
semaphore (see "drm/amdgpu: add invalidate semaphore support for
gmc v12.1").
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG 5.0.2 has 2 JPEG instances per MID. Report 2 JPEG instances per AID
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the incorrect interrupt process warning message.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
JPEG 5.0.2 has two JPEG instances per MID. Register JPEG interrupt
sources for both VCN IH clients and add a JPEG 5.0.2-specific interrupt
handler.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove forcing the VCN instance mask to a single instance during soc_v1_0
SOC setup. Use the configured instance mask so multi-instance VCN 5.0.2
topologies can be enabled.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When RRMT is enabled, VCN firmware's register access is remapped so
that VCN instances on different dies (VCN0/1 on MID0, VCN2/3 on MID1)
require different target addresses for the same logical register.
Remove the RRMT capability detection so the driver always assumes RRMT
is disabled, using local-die SMN addresses for all instances.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VCN 5.0.2 has two VCN instances per MID. Update the SOC configuration
and VCN 5.0.2 initialization to handle multiple instances
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each VCN 5.0.2 instance has 11 doorbells. Use an 11-doorbell when
calculating the per-instance VCN ring doorbell index.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Each VCN 5.0.2 instance has 1 VCN ring and 10 JPEG rings, requiring 11
consecutive doorbells. Increase the NBIO doorbell range size from 8
to 11 to cover the full ring set.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up the default JPEG instance mask and related instance counts during
soc_v1_0 SOC configuration, before IP discovery is enabled.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if eeprom is not functional, other RAS functions can
still work, no need to block the whole driver initialization.
Previously-retired bad pages are no longer loaded when
ras_core_eeprom_recovery() fails, so the GPU keeps using known-bad
memory;
New bad pages cannot be persisted as well.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set up the default VCN instance mask and related instance counts during
soc_v1_0 SOC configuration, before IP discovery is enabled.
Signed-off-by: Sonny Jiang <sonjiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Contains fix for userq waiting on timeline syncobjs and adds
userq support for signaling timeline syncobjs.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid hardcode, get the parameters from amdgpu(retire SOCKET_LFB_SIZE
macro).
For the algorithms of ras address conversion and get_die_id,
not only pa, (pa + pa_base) is also needed.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu is moving a BO from a location in VRAM to another
location in VRAM, we map both BOs in the GART and perform the
copy operation using the GART addresses.
We are not writing into the first GART window, so let's set
the PTE flags to make it readonly. This doesn't fix any known
issues but let's do it just to be safe.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
smu_v15_0_load_microcode() and smu_v15_0_set_single_dpm_table() are not
called anywhere; the latter is a carry-over from a previous version. The
static helpers smu_v15_0_get_dpm_freq_by_index(),
smu_v15_0_get_dpm_level_count() and smu_v15_0_get_fine_grained_status()
were only called from smu_v15_0_set_single_dpm_table(), so remove those
as well. Remove all functions along with their declarations from the
header.
Fixes: c7fc0f3723 ("drm/amd: Enable SMU 15_0_0 support")
Fixes: f7bee962d9 ("drm/amd/pm: Update dpm table structs for smu_v15_0")
Reported-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework smu_v15_0_0_get_gpu_metrics() to derive values from the raw
accumulator double-buffer instead of the firmware-computed SmuMetrics_t
snapshot:
- Add SMU_V15_IOD_AVG()/SMU_V15_CORE_AVG() helpers: wrapping_sub() delta
over the sampling window, scaled by the caller's unit factor, then
descaled from Q10 fixed-point with >>10 (scale before shift to keep
sub-unit precision); typeof() preserves each field's width.
- Reuse the same macro in smu_v15_0_0_compute_all_metrics(), dropping
the open-coded div_u64(..., 1024) boilerplate.
- Drop the unused smu_v15_0_0_get_gpu_metrics_table() helper and the
SMU_TABLE_SMU_METRICS allocation.
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Assisted-by: Claude:claude-opus-4.8
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This DC patchset brings improvements in multiple areas. In summary, we have:
* DCN6 fixes on GPUVM calculations, HostVM and SOCBB VM config,
clkmgr interfaces, and peak bandwidth measurement
* HDMI FRL fixes on LT timeout behaviour and cap restore during
non-destructive link verify
* Greatly enhanced KUnit coverage across CRTC, VRR, and cursor paths
* eDP panel polarity control, FreeSync range quirk, and Z8-based
zstate support
* DCE ASIC code gated behind CONFIG_DRM_AMD_DC_DCE for DCN-only builds
* Fixes on HPD filter programming, DMUB DIG PHY wait, dcn42b
force_min_dcfclk clamp, audio tests, and UTM client QC profile override
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Restore the FRL verified cap from the reported cap so a link whose FRL
pre-training was skipped (e.g. skip_frl_pre_training) stays on FRL across
a hotplug instead of falling back to TMDS.
On hotplug the HDMI sink is recreated as SIGNAL_TYPE_HDMI_TYPE_A and
only the destructive verify path promotes it to FRL via
hdmi_frl_verify_link_cap(). When the non-destructive path runs - which is
what the skip_frl_pre_training quirk forces on an already-active link -
the HDMI branch mistakenly assigned the DP verified_link_cap from
reported_link_cap and left frl_verified_link_cap stale. With
frl_link_rate reading back as HDMI_FRL_LINK_RATE_DISABLE, the stream
collapsed to TMDS. Assign frl_verified_link_cap from
frl_reported_link_cap (populated during detection by
hdmi_frl_retrieve_link_cap()) to match the reference DM behavior and keep
the link on FRL.
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The out-of-order (peak prefetch) bandwidth probe could report
bandwidth far above the physical clock ceiling. The data and
duration counters could latch on different edges of the shared
stop event, and very short measurement windows amplified refclk
tick quantization into large relative errors.
[How]
Add a dedicated counter (2) that generates the single stop event
both the data counter (1) and duration counter (4) key off of, so
they always latch on the same edge. Reject samples where the data
counter overshoots the generator's target, or where the duration
is too short to trust. Also drop the single-timing-group
restriction on the peak-BW probe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- PMFW does not populate the SopCount correctly today. For now limit
to 5 since that's the default number of populated array entries for
the Sop array in PMFW.
- Also remove some commented out code
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Use GPL-2.0 OR MIT and Copyright 2026 to match other KUnit test files.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Update clk_mgr interfaces to match with the DAL<->PMFW
message interfaces for DCN6.
- dalsmc.h MAX_PPCLK_COUNT must match PPCLK count in driver_if header
- include driver_if header as a local copy for now since PMFW carried one
will not build
- clk table returned by PMFW is in Khz, must convert to Mhz accordingly
- boot snapshot for dispclk is in Khz
- Get*Clk interfaces should return frequency in Khz, ensure that DAL
interfaces are implemented to handle this
- Move structure definitions into dcn60_clk_mgr_smu_msg.h header since
the official dalsmc.h header does not carry all these definitions yet
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some panels advertise a FreeSync range minimum that does not operate
reliably at the low end:
- X34GS (EDID panel id ACR 0x08AF) reports a minimum that
can flicker or drop out when the refresh rate approaches the reported
minimum.
- 34w-30 (EDID panel id LEN 0x66F1) reports a 48 Hz minimum over
DisplayPort, but the panel fails to light up at that minimum, resulting
in a black screen. Forcing the minimum to 60 Hz avoids the black screen
and lets the display light up normally.
[how]
- Add a force_freesync_min_hz field to struct dc_panel_patch.
- Add apply_edid_quirks() cases keyed on the affected panel ids that set
force_freesync_min_hz (55 Hz for the X34GS, 60 Hz for the G34w-30).
- In amdgpu_dm_update_freesync_caps(), when the quirk is set and the sink
is otherwise FreeSync capable, clamp the reported VRR range minimum
(min_vfreq and monitor_range.min_vfreq) to the quirked value.
- Add a KUnit test covering the new quirk.
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_crtc_get_cursor_mode() with a synthetic
two-plane atomic-state fixture, an invocation helper, and a colorop
helper, covering:
- new hardware defaulting to overlay mode,
- an unchanged state keeping native mode,
- a disabled cursor keeping native mode,
- a YUV underlying plane forcing overlay,
- a plane scale mismatch forcing overlay,
- full cursor coverage allowing native mode,
- a coverage hole forcing overlay,
- an unrelated update leaving the cursor untouched,
- a cursor scale change forcing recomputation,
- a cursor position change forcing recomputation,
- a color pipeline activation forcing recomputation.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add two KUnit tests for dm_plane_color_pipeline_active(): one confirming
an active pipeline is detected, and one confirming colorops on an
unrelated plane are ignored.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add three KUnit tests for amdgpu_dm_check_native_cursor_state(), reusing
the cursor framebuffer fixture, covering the disabled-cursor path,
rejection of a non-zero source offset, and delegation to the framebuffer
check.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add nine KUnit tests for dm_check_cursor_fb() with a cursor framebuffer
fixture, covering the supported linear case, size, cropping and pitch
rejections, tiling handling across ASIC generations, and modifier-based
tiling skips.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DIG transmitter ENABLE and voltage/pre-emphasis VBIOS commands can
take longer than the default inbox timeout after amdgpu reload, while
DMCUB runs extended DPPHY polling before advancing INBOX1 RPTR.
[How]
Extend the waiting time to 500ms
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
- Revert logic to fallback to polling if LT no timeout is set
- Update LT timeout to 300ms for appropriate link rates
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add tests for amdgpu_dm_handle_vrr_transition() covering steady inactive
state and an inactive-to-active-to-inactive vblank reference round trip.
Assisted-by: Copilot:GPT-5.6-Sol
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
