Since monitor_thermal_zone() is only called when the given thermal zone
has been enabled, as per the thermal_zone_device_is_enabled() check in
__thermal_zone_device_update(), the tz->mode check in it always
evaluates to "false" and the thermal_zone_device_set_polling()
invocation depending on it is dead code, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10547425.nUPlyArG6x@rjwysocki.net
Along the lines of commit 24aad192c6 ("thermal: core: Drop
redundant checks from thermal_bind_cdev_to_trip()") notice that
thermal_unbind_cdev_from_trip() is only called by
thermal_zone_cdev_unbind() under the thermal zone lock, so it
need not use lockdep_assert_held() for that lock.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3341369.44csPzL39Z@rjwysocki.net
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6103874.lOV4Wx5bFT@rjwysocki.net
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes: be0a3600aa ("thermal: sysfs: Rework the handling of trip point updates")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/12528772.O9o76ZdvQC@rjwysocki.net
Since thermal_bind_cdev_to_trip() is only called by
thermal_zone_cdev_binding() under the thermal zone lock and the latter
is only called by thermal_zone_device_register_with_trips() and
__thermal_cooling_device_register(), under thermal_list_lock in both
cases, both lockdep_assert_held() assertions can be dropped from it.
Moreover, in both cases thermal_zone_cdev_binding() is called after
both tz and cdev have been added to the global lists of thermal zones
and cooling device, respectively, so the check against their list nodes
in thermal_bind_cdev_to_trip() is redundant and can be dropped either.
Link: https://lore.kernel.org/linux-pm/CAJZ5v0jwkc2PB+osSkkYF9vJ1Vpp3MFE=cGQmQ2Xzjb3yjVfJg@mail.gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/4607540.LvFx2qVVIh@rjwysocki.net
Using round_jiffies() in thermal_set_delay_jiffies() is invalid because
its argument should be time in the future in absolute jiffies and it
computes the result with respect to the current jiffies value at the
invocation time. Fortunately, in the majority of cases it does not
make any difference due to the time_is_after_jiffies() check in
round_jiffies_common().
While using round_jiffies_relative() instead of round_jiffies() might
reflect the intent a bit better, it still would not be defensible
because that function should be called when the timer is about to be
set and it is not suitable for pre-computation of delay values.
Accordingly, drop thermal_set_delay_jiffies() altogether, simply
convert polling_delay and passive_delay to jiffies during thermal
zone initialization and make thermal_zone_device_set_polling() call
round_jiffies_relative() on the delay if it is greather than 1 second.
Fixes: 17d399cd9c ("thermal/core: Precompute the delays from msecs to jiffies")
Fixes: e5f2cda61d ("thermal/core: Move thermal_set_delay_jiffies to static")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1994438.PYKUYFuaPT@rjwysocki.net
Make thermal_bind_cdev_to_trip() take a struct cooling_spec pointer
to reduce the number of its arguments, change the return type of
thermal_unbind_cdev_from_trip() to void and rearrange the code in
thermal_zone_cdev_binding() to reduce the indentation level.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1831773.TLkxdtWsSY@rjwysocki.net
[ rjw: Changed the name of a new function argument ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are no more callers of thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), so drop them along with all of
the corresponding headers, code and documentation.
Moreover, because the .bind() and .unbind() thermal zone callbacks would
only be used when the above functions, respectively, were called, drop
them as well along with all of the code related to them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/4251116.1IzOArtZ34@rjwysocki.net
Make the thermal_of driver use the .should_bind() thermal zone callback
to provide the thermal core with the information on whether or not to
bind the given cooling device to the given trip point in the given
thermal zone. If it returns 'true', the thermal core will bind the
cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
assumed the same trip points ordering in the driver and in the thermal
core (that may not be true any more in the future). The .bind()
callback would walk the given thermal zone's cooling maps to find all
of the valid trip point combinations with the given cooling device and
it would call thermal_zone_bind_cooling_device() for all of them using
trip point indices reflecting the ordering of the trips in the DT.
The .should_bind() callback still walks the thermal zone's cooling maps,
but it can use the trip object passed to it by the thermal core to find
the trip in question in the first place and then it uses the
corresponding 'cooling-device' entries to look up the given cooling
device. To be able to match the trip object provided by the thermal
core to a specific device node, the driver sets the 'priv' field of each
trip to the corresponding device node pointer during initialization.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # rk3399-rock960
Link: https://patch.msgid.link/2236794.NgBsaNRSFp@rjwysocki.net
[ rjw: Removed excessive of_node_put() ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make the imx_thermal driver use the .should_bind() thermal zone callback
to provide the thermal core with the information on whether or not to
bind the given cooling device to the given trip point in the given
thermal zone. If it returns 'true', the thermal core will bind the
cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
In the imx_thermal case, it only needs to return 'true' for the passive
trip point and it will match any cooling device passed to it, in
analogy with the old-style imx_bind() callback function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/2485070.jE0xQCEvom@rjwysocki.net
Make the mlxsw core_thermal driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
It replaces the .bind() and .unbind() thermal zone callbacks (in 3
places) which assumed the same trip points ordering in the driver
and in the thermal core (that may not be true any more in the
future). The .bind() callbacks used loops over trip point indices
to call thermal_zone_bind_cooling_device() for the same cdev (once
it had been verified) and all of the trip points, but they passed
different 'upper' and 'lower' values to it for each trip.
To retain the original functionality, the .should_bind() callbacks
need to use the same 'upper' and 'lower' values that would be used
by the corresponding .bind() callbacks when they are about to return
'true'. To that end, the 'priv' field of each trip is set during the
thermal zone initialization to point to the corresponding 'state'
object containing the maximum and minimum cooling states of the
cooling device.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/2216931.Icojqenx9y@rjwysocki.net
Make the acerhdf driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
The previously existing acerhdf_bind() function bound cooling devices
to thermal trip point 0 only, so the new callback needs to return 'true'
for trip point 0. However, it is straightforward to observe that trip
point 0 is an active trip point and the only other trip point in the
driver's thermal zone is a critical one, so it is sufficient to return
'true' from that callback if the type of the given trip point is
THERMAL_TRIP_ACTIVE.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Peter Kästle <peter@piie.net>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3779411.MHq7AAxBmi@rjwysocki.net
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
are only called locally in the thermal core now, they can be static,
so change their definitions accordingly and drop their headers from
the global thermal header file.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3512161.QJadu78ljV@rjwysocki.net
Make the ACPI thermal zone driver use the .should_bind() thermal zone
callback to provide the thermal core with the information on whether or
not to bind the given cooling device to the given trip point in the
given thermal zone. If it returns 'true', the thermal core will bind
the cooling device to the trip and the corresponding unbinding will be
taken care of automatically by the core on the removal of the involved
thermal zone or cooling device.
This replaces the .bind() and .unbind() thermal zone callbacks which
allows the code to be simplified quite significantly while providing
the same functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1812827.VLH7GnMWUR@rjwysocki.net
The current design of the code binding cooling devices to trip points in
thermal zones is convoluted and hard to follow.
Namely, a driver that registers a thermal zone can provide .bind()
and .unbind() operations for it, which are required to call either
thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip(),
respectively, or thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), respectively, for every relevant
trip point and the given cooling device. Moreover, if .bind() is
provided and .unbind() is not, the cleanup necessary during the removal
of a thermal zone or a cooling device may not be carried out.
In other words, the core relies on the thermal zone owners to do the
right thing, which is error prone and far from obvious, even though all
of that is not really necessary. Specifically, if the core could ask
the thermal zone owner, through a special thermal zone callback, whether
or not a given cooling device should be bound to a given trip point in
the given thermal zone, it might as well carry out all of the binding
and unbinding by itself. In particular, the unbinding can be done
automatically without involving the thermal zone owner at all because
all of the thermal instances associated with a thermal zone or cooling
device going away must be deleted regardless.
Accordingly, introduce a new thermal zone operation, .should_bind(),
that can be invoked by the thermal core for a given thermal zone,
trip point and cooling device combination in order to check whether
or not the cooling device should be bound to the trip point at hand.
It takes an additional cooling_spec argument allowing the thermal
zone owner to specify the highest and lowest cooling states of the
cooling device and its weight for the given trip point binding.
Make the thermal core use this operation, if present, in the absence of
.bind() and .unbind(). Note that .should_bind() will be called under
the thermal zone lock.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/9334403.CDJkKcVGEf@rjwysocki.net
Since thermal_bind_cdev_to_trip() and thermal_unbind_cdev_from_trip()
acquire the thermal zone lock, the locking rules for their callers get
complicated. In particular, the thermal zone lock cannot be acquired
in any code path leading to one of these functions even though it might
be useful to do so.
To address this, remove the thermal zone locking from both these
functions, add lockdep assertions for the thermal zone lock to both
of them and make their callers acquire the thermal zone lock instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3837835.kQq0lBPeGt@rjwysocki.net
Two sysfs show/store functions for attributes representing thermal
instances, trip_point_show() and weight_store(), retrieve the thermal
zone pointer from the instance object at hand, but they may also get
it from their dev argument, which is more consistent with what the
other thermal sysfs functions do, so make them do so.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/1987669.PYKUYFuaPT@rjwysocki.net
Because the trip and cdev pointers are sufficient to identify a thermal
instance holding them unambiguously, drop the additional thermal zone
checks from two loops walking the list of thermal instances in a
thermal zone.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/10527734.nUPlyArG6x@rjwysocki.net
It is not necessary to look up the thermal zone and the cooling device
in the respective global lists to check whether or not they are
registered. It is sufficient to check whether or not their respective
list nodes are empty for this purpose.
Use the above observation to simplify thermal_bind_cdev_to_trip(). In
addition, eliminate an unnecessary ternary operator from it.
Moreover, add lockdep_assert_held() for thermal_list_lock to it because
that lock must be held by its callers when it is running.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/3324214.44csPzL39Z@rjwysocki.net
Fold bind_cdev() into __thermal_cooling_device_register() and bind_tz()
into thermal_zone_device_register_with_trips() to reduce code bloat and
make it somewhat easier to follow the code flow.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/2962184.e9J7NaK4W3@rjwysocki.net
Introduce a facility allowing the thermal core functionality to be
exercised in a controlled way in order to verify its behavior, without
affecting its regular users noticeably.
It is based on the idea of preparing thermal zone templates along with
their trip points by writing to files in debugfs. When ready, those
templates can be used for registering test thermal zones with the
thermal core.
The temperature of a test thermal zone created this way can be adjusted
via debugfs, which also triggers a __thermal_zone_device_update() call
for it. By manipulating the temperature of a test thermal zone, one can
check if the thermal core reacts to the changes of it as expected.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6065927.lOV4Wx5bFT@rjwysocki.net
[ rjw: Fixed ordering of kcalloc() arguments ]
[ rjw: Fixed debugfs_create_dir() return value checks ]
[ rjw: Fixed two kerneldoc comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In order to set the scene for the thresholds support which have to
manipulate the low and high temperature boundaries for the interrupt
support, we must pass the low and high values to the incoming
thresholds routine.
The variables are set from the thermal_zone_set_trips() where the
function loops the thermal trips to figure out the next and the
previous temperatures to set the interrupt to be triggered when they
are crossed.
These variables will be needed by the function in charge of handling
the thresholds in the incoming changes but they are local to the
aforementioned function thermal_zone_set_trips().
Move the low and high boundaries computation out of the function in
thermal_zone_device_update() so they are accessible from there.
The positive side effect is they are computed in the same loop as
handle_thermal_trip(), so we remove one loop.
Co-developed-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20240816081241.1925221-2-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After running once, the for_each_trip_desc() loop in
bang_bang_manage() is pure needless overhead because it is not going to
make any changes unless a new cooling device has been bound to one of
the trips in the thermal zone or the system is resuming from sleep.
For this reason, make bang_bang_manage() set governor_data for the
thermal zone and check it upfront to decide whether or not it needs to
do anything.
However, governor_data needs to be reset in some cases to let
bang_bang_manage() know that it should walk the trips again, so add an
.update_tz() callback to the governor and make the core additionally
invoke it during system resume.
To avoid affecting the other users of that callback unnecessarily, add
a special notification reason for system resume, THERMAL_TZ_RESUME, and
also pass it to __thermal_zone_device_update() called during system
resume for consistency.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/2285575.iZASKD2KPV@rjwysocki.net
After recent changes, the Bang-bang governor may not adjust the
initial configuration of cooling devices to the actual situation.
Namely, if a cooling device bound to a certain trip point starts in
the "on" state and the thermal zone temperature is below the threshold
of that trip point, the trip point may never be crossed on the way up
in which case the state of the cooling device will never be adjusted
because the thermal core will never invoke the governor's
.trip_crossed() callback. [Note that there is no issue if the zone
temperature is at the trip threshold or above it to start with because
.trip_crossed() will be invoked then to indicate the start of thermal
mitigation for the given trip.]
To address this, add a .manage() callback to the Bang-bang governor
and use it to ensure that all of the thermal instances managed by the
governor have been initialized properly and the states of all of the
cooling devices involved have been adjusted to the current zone
temperature as appropriate.
Fixes: 530c932bdf ("thermal: gov_bang_bang: Use .trip_crossed() instead of .throttle()")
Link: https://lore.kernel.org/linux-pm/1bfbbae5-42b0-4c7d-9544-e98855715294@piie.net/
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/8419356.T7Z3S40VBb@rjwysocki.net
Move the setting of the thermal instance target state from
bang_bang_control() into a separate function that will be also called
in a different place going forward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/3313587.aeNJFYEL58@rjwysocki.net
Instead of clearing the "updated" flag for each cooling device
affected by the trip point crossing in bang_bang_control() and
walking all thermal instances to run thermal_cdev_update() for all
of the affected cooling devices, call __thermal_cdev_update()
directly for each of them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Kästle <peter@piie.net>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>
Cc: 6.10+ <stable@vger.kernel.org> # 6.10+
Link: https://patch.msgid.link/13583081.uLZWGnKmhe@rjwysocki.net
Change trip_point_hyst_store() and replace thermal_zone_trip_updated()
with thermal_zone_set_trip_hyst() to follow the trip_point_temp_store()
code pattern for more consistency.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5508466.Sb9uPGUboI@rjwysocki.net
The _store() and _show() functions for sysfs attributes corresponding
to trip point parameters (type, temperature and hysteresis) read the
trip ID from the attribute name and then use the trip ID as the index
in the given thermal zone's trips table to get to the trip object they
want.
Instead of doing this, make them use the attribute pointer they get
as the second argument to get to the trip object embedded in the same
struct thermal_trip_desc as the struct device_attribute pointed to by
it, which is much more straightforward and less overhead.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/114841552.nniJfEyVGO@rjwysocki.net
Instead of allocating memory for trip point sysfs attributes separately,
store them in struct thermal_trip_desc for each trip individually which
allows a few extra memory allocations to be avoided.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/46571375.fMDQidcC6G@rjwysocki.net
- Fix 32-bit PTI for real. pti_clone_entry_text() is called twice, once
before initcalls so that initcalls can use the user-mode helper and
then again after text is set read only. Setting read only on 32-bit
might break up the PMD mapping, which makes the second invocation of
pti_clone_entry_text() find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox not read only after init as the mail
box must be writable in the case that CPU hotplug operations happen
after boot. Otherwise the attempt to start a CPU crashes with a write
to read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
-----BEGIN PGP SIGNATURE-----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=pS6f
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- Fix 32-bit PTI for real.
pti_clone_entry_text() is called twice, once before initcalls so that
initcalls can use the user-mode helper and then again after text is
set read only. Setting read only on 32-bit might break up the PMD
mapping, which makes the second invocation of pti_clone_entry_text()
find the mappings out of sync and failing.
Allow the second call to split the existing PMDs in the user mapping
and synchronize with the kernel mapping.
- Don't make acpi_mp_wake_mailbox read-only after init as the mail box
must be writable in the case that CPU hotplug operations happen after
boot. Otherwise the attempt to start a CPU crashes with a write to
read only memory.
- Add a missing sanity check in mtrr_save_state() to ensure that the
fixed MTRR MSRs are supported.
Otherwise mtrr_save_state() ends up in a #GP, which is fixed up, but
the WARN_ON() can bring systems down when panic on warn is set.
* tag 'x86-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mtrr: Check if fixed MTRRs exist before saving them
x86/paravirt: Fix incorrect virt spinlock setting on bare metal
x86/acpi: Remove __ro_after_init from acpi_mp_wake_mailbox
x86/mm: Fix PTI for i386 some more
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This results
in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor of
clamping the values, but the clamping never worked correctly under all
circumstances. The NTP people asked to not bring the sanity checks back
as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem so
it can adjust and if the clock was set into the future expire timers if
needed. The caller should provide a bitmask to tell hrtimers which
clocks have been adjusted. adjtimex() uses not the proper constant and
uses CLOCK_REALTIME instead, which is 0. So hrtimers adjusts only the
clocks, but does not check for expired timers, which might make them
expire really late. Use the proper bitmask constant instead.
-----BEGIN PGP SIGNATURE-----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=EY09
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull time keeping fixes from Thomas Gleixner:
- Fix a couple of issues in the NTP code where user supplied values are
neither sanity checked nor clamped to the operating range. This
results in integer overflows and eventualy NTP getting out of sync.
According to the history the sanity checks had been removed in favor
of clamping the values, but the clamping never worked correctly under
all circumstances. The NTP people asked to not bring the sanity
checks back as it might break existing applications.
Make the clamping work correctly and add it where it's missing
- If adjtimex() sets the clock it has to trigger the hrtimer subsystem
so it can adjust and if the clock was set into the future expire
timers if needed. The caller should provide a bitmask to tell
hrtimers which clocks have been adjusted.
adjtimex() uses not the proper constant and uses CLOCK_REALTIME
instead, which is 0. So hrtimers adjusts only the clocks, but does
not check for expired timers, which might make them expire really
late. Use the proper bitmask constant instead.
* tag 'timers-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix bogus clock_was_set() invocation in do_adjtimex()
ntp: Safeguard against time_constant overflow
ntp: Clamp maxerror and esterror to operating range
- The interrupt core fails to honor caller supplied affinity hints for
non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale.
-----BEGIN PGP SIGNATURE-----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=hR0M
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three small fixes for interrupt core and drivers:
- The interrupt core fails to honor caller supplied affinity hints
for non-managed interrupts and uses the system default affinity on
startup instead. Set the missing flag in the descriptor to tell the
core to use the provided affinity.
- Fix a shift out of bounds error in the Xilinx driver
- Handle switching to level trigger correctly in the RISCV APLIC
driver. It failed to retrigger the interrupt which causes it to
become stale"
* tag 'irq-urgent-2024-08-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Retrigger MSI interrupt on source configuration
irqchip/xilinx: Fix shift out of bounds
genirq/irqdesc: Honor caller provided affinity in alloc_desc()
Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZri66w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym0iACgrsvPnfOBpLM0mx3toofldprhaj8AoM6ork2F
JOHm3eu8t6NUl+yCqlL7
=/jeb
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for reported issues for
6.11-rc3. Included in here are:
- usb serial driver MODULE_DESCRIPTION() updates
- usb serial driver fixes
- typec driver fixes
- usb-ip driver fix
- gadget driver fixes
- dt binding update
All of these have been in linux-next with no reported issues"
* tag 'usb-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix a deadlock in ucsi_send_command_common()
usb: typec: tcpm: avoid sink goto SNK_UNATTACHED state if not received source capability message
usb: gadget: f_fs: pull out f->disable() from ffs_func_set_alt()
usb: gadget: f_fs: restore ffs_func_disable() functionality
USB: serial: debug: do not echo input by default
usb: typec: tipd: Delete extra semi-colon
usb: typec: tipd: Fix dereferencing freeing memory in tps6598x_apply_patch()
usb: gadget: u_serial: Set start_delayed during suspend
usb: typec: tcpci: Fix error code in tcpci_check_std_output_cap()
usb: typec: fsa4480: Check if the chip is really there
usb: gadget: core: Check for unset descriptor
usb: vhci-hcd: Do not drop references before new references are gained
usb: gadget: u_audio: Check return codes from usb_ep_enable and config_ep_by_speed.
usb: gadget: midi2: Fix the response for FB info with block 0xff
dt-bindings: usb: microchip,usb2514: Add USB2517 compatible
USB: serial: garmin_gps: use struct_size() to allocate pkt
USB: serial: garmin_gps: annotate struct garmin_packet with __counted_by
USB: serial: add missing MODULE_DESCRIPTION() macros
USB: serial: spcp8x5: remove unused struct 'spcp8x5_usb_ctrl_arg'
Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZri5gA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCCgCfS612Ty+xRL/CbTznTobArGq5hbMAoLT3hqkN
1Mi7sbRC//FiN2HOFc8I
=x19f
-----END PGP SIGNATURE-----
Merge tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported problems
for 6.11-rc3. Included in here are:
- sc16is7xx serial driver fixes
- uartclk bugfix for a divide by zero issue
- conmakehash userspace build issue fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: vt: conmakehash: cope with abs_srctree no longer in env
serial: sc16is7xx: fix invalid FIFO access with special register set
serial: sc16is7xx: fix TX fifo corruption
serial: core: check uartclk for zero to avoid divide by zero
Here are some small fixes, and some documentation updates for 6.11-rc3.
Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZri42Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylYxACgp5VbmZ17BD3RN7gYAg4pq4HaIcIAoLl6ExGp
Kvq8wUVyP+HlyEBgm+wj
=tnDj
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / documentation fixes from Greg KH:
"Here are some small fixes, and some documentation updates for
6.11-rc3. Included in here are:
- embargoed hardware documenation updates based on a lot of review by
legal-types in lots of companies to try to make the process a _bit_
easier for us to manage over time.
- rust firmware documentation fix
- driver detach race fix for the fix that went into 6.11-rc1
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix uevent_show() vs driver detach race
Documentation: embargoed-hardware-issues.rst: add a section documenting the "early access" process
Documentation: embargoed-hardware-issues.rst: minor cleanups and fixes
rust: firmware: fix invalid rustdoc link
Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZri1Xw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn3PACdGIk4UDVkpZ3bQffGW4w5VzeXCa0AoJNAyYQN
yhF2YAI/muxsf/FQ6Sp9
=pgV7
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc3 for
reported issues. Included in here are:
- binder driver fixes
- fsi MODULE_DESCRIPTION() additions (people seem to love them...)
- eeprom driver fix
- Kconfig dependency fix to resolve build issues
- spmi driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
spmi: pmic-arb: add missing newline in dev_err format strings
spmi: pmic-arb: Pass the correct of_node to irq_domain_add_tree
binder_alloc: Fix sleeping function called from invalid context
binder: fix descriptor lookup for context manager
char: add missing NetWinder MODULE_DESCRIPTION() macros
misc: mrvl-cn10k-dpi: add PCI_IOV dependency
eeprom: ee1004: Fix locking issues in ee1004_probe()
fsi: add missing MODULE_DESCRIPTION() macros
Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change. One driver fix in ufs.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZrh0viYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishddhAP42g95k
bQESxYiYtjCPq15hKqAcoT1c3q/rlwOXV+U/WwD9Ge9EVcWN5CCGHnXOqVvOSK0R
OVrsnxUumgSQMcpkGrY=
=Fwey
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two core fixes: one to prevent discard type changes (seen on iSCSI)
during intermittent errors and the other is fixing a lockdep problem
caused by the queue limits change.
And one driver fix in ufs"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Keep the discard mode stable
scsi: sd: Move sd_read_cpr() out of the q->limits_lock region
scsi: ufs: core: Fix hba->last_dme_cmd_tstamp timestamp updating logic
- Two minor fixes for recent changes
-----BEGIN PGP SIGNATURE-----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=YX9E
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
SMBusAlert handling in the I2C core gets two fixes. One to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour. The I2C header gets a
compilation fix is ACPI is enabled but I2C isn't. The testunit gets a
rename in the code to match the documentation.
Two fixes on the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out.
-----BEGIN PGP SIGNATURE-----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=M+Mo
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
-----BEGIN PGP SIGNATURE-----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=tNDn
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: avoid deadlock between dma debug vs printk and netconsole
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so we
can fix this with another version bump.
-----BEGIN PGP SIGNATURE-----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=f3fR
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs
Pull more bcachefs fixes from Kent Overstreet:
"A couple last minute fixes for the new disk accounting
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
we can fix this with another version bump"
* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
bcachefs: bcachefs_metadata_version_disk_accounting_v3
bcachefs: improve bch2_dev_usage_to_text()
bcachefs: bch2_accounting_invalid()
bcachefs: Switch to .get_inode_acl()
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe6 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
The device tree property 'xlnx,kind-of-intr' is sanity checked that the
bitmask contains only set bits which are in the range of the number of
interrupts supported by the controller.
The check is done by shifting the mask right by the number of supported
interrupts and checking the result for zero.
The data type of the mask is u32 and the number of supported interrupts is
up to 32. In case of 32 interrupts the shift is out of bounds, resulting in
a mismatch warning. The out of bounds condition is also reported by UBSAN:
UBSAN: shift-out-of-bounds in irq-xilinx-intc.c:332:22
shift exponent 32 is too large for 32-bit type 'unsigned int'
Fix it by promoting the mask to u64 for the test.
Fixes: d50466c907 ("microblaze: intc: Refactor DT sanity check")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/1723186944-3571957-1-git-send-email-radhey.shyam.pandey@amd.com
-----BEGIN PGP SIGNATURE-----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=GIpz
-----END PGP SIGNATURE-----
Merge tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- DFS fix
- fix for security flags for requiring encryption
- minor cleanup
* tag '6.11-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: cifs_inval_name_dfs_link_error: correct the check for fullpath
Fix spelling errors in Server Message Block
smb3: fix setting SecurityFlags when encryption is required
A few SPI fixes since the merge window, clock rate calculation fixes for
the Kunpeng and lpsi drivers and a missing registration of a device ID
for spidev (which had only been updated for DT cases, causing warnings).
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAma2p1kACgkQJNaLcl1U
h9Ab6Qf+Je5sY16uPQXVSVtKw/X5qonsXRaZxCqExxOvsPdtcEdsNsqub9WMvy0B
HOU8sHZQH+/Jkywof69EtNEv8gYJJ2el8Wc9MLTG8HoJDwSYsNbnkIEaTaiNwC+B
ELCPocwHglM28b91DX5umnvPj8vosEwO7eutxDqsArDAG43ZQAQ0EdbZx8N4f9/M
LhFtFiNE16sjoN5e28VBAwaQlwH6CEeZo4RJvGangYa7Mc1x/1/Jh2/qsPOqQnxU
AXmUp71VMjENe/PBZ3RwRUdxbTot6Sa7bSeQk8Irars1T/bF3h6qeF8We55KY8Ij
WTKcUCZS/3iCDfUZb+DnvGZpByzE5Q==
=kGYC
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few SPI fixes: clock rate calculation fixes for the Kunpeng and lpsi
drivers and a missing registration of a device ID for spidev (which
had only been updated for DT cases, causing warnings)"
* tag 'spi-fix-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: Fix scldiv calculation
spi: spidev: Add missing spi_device_id for bh2228fv
spi: hisi-kunpeng: Add verification for the max_frequency provided by the firmware
spi: hisi-kunpeng: Add validation for the minimum value of speed_hz
bcachefs_metadata_version_disk_accounting_v2 erroneously had padding
bytes in disk_accounting_key, which is a problem because we have to
guarantee that all unused bytes in disk_accounting_key are zeroed.
Fortunately 6.11 isn't out yet, so it's cheap to fix this by spinning a
new version.
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
