[ Upstream commit 9218dc26fd ]
If nlink is maximal for a directory (-1) and inside that directory you
perform a rename for some child directory (not moving from the parent),
then the nlink of the first directory is first incremented and later
decremented. Normally this is fine, but when nlink = -1 this causes a
wrap around to 0, and then drop_nlink issues a warning.
After applying the patch syzbot no longer issues any warnings. I also
ran some basic fs tests to look for any regressions.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Reported-by: syzbot+9131ddfd7870623b719f@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=9131ddfd7870623b719f
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb0cfcf265 ]
The jfsIOWait() thread calls try_to_freeze() but lacks set_freezable(),
causing it to remain non-freezable by default. This prevents proper
freezing during system suspend.
Add set_freezable() to make the thread freezable as intended.
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac656d7d7c ]
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=001f, idProduct=0b21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: AB13X USB Audio
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210926172016
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB6217522D0DB6E2C9DF46B56ED265A@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 084d5d4441 ]
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly.
Link: https://patch.msgid.link/20260209121212.171430-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1ff574bb ]
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84faa91585 ]
imx_rpmsg_probe() calls snd_soc_find_dai() without holding client_mutex.
However, snd_soc_find_dai() has lockdep_assert_held(&client_mutex)
indicating callers must hold this lock, as the function iterates over the
global component list.
All other callers of snd_soc_find_dai() either hold client_mutex via the
snd_soc_bind_card() path or use the snd_soc_find_dai_with_mutex() wrapper.
Use snd_soc_find_dai_with_mutex() instead to fix the missing lock
protection.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260205052429.4046903-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96e041647b ]
The driver currently skips the abort sequence for target mode when serial
engine errors occur. This leads to improper error recovery as the serial
engine may remain in an undefined state without proper cleanup, potentially
causing subsequent operations to fail or behave unpredictably.
Fix this by ensuring the abort sequence and DMA reset always execute during
error recovery, as both are required for proper serial engine error
handling.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260204162854.1206323-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16c589567a ]
If there's a mismatch between the DAI links in the machine driver and
the topology, it is possible that the playback/capture widget is not
set, especially in the case of loopback capture for echo reference
where we use the dummy DAI link. Return the error when the widget is not
set to avoid a null pointer dereference like below when the topology is
broken.
RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Mateusz Redzynia <mateuszx.redzynia@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260204081833.16630-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1dccb485c ]
pwrseq_power_on() calls pwrseq_unit_disable() when the
post_enable callback fails. However, this call is outside the
scoped_guard(mutex, &pwrseq->state_lock) block that ends.
pwrseq_unit_disable() has lockdep_assert_held(&pwrseq->state_lock),
which will fail when called from this error path.
Add the scoped_guard block to cover the post_enable callback and its
error handling to ensure the lock is held when pwrseq_unit_disable() is
called.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260130182651.1576579-1-n7l8m4@u.northwestern.edu
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8232e6079a ]
Handle failures in the resume path by unwinding previously enabled
resources.
If enabling regulators or syncing the regcache fails, disable regulators
and unprepare the clock to avoid leaking resources and leaving the device
in a partially resumed state.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Link: https://patch.msgid.link/20260130160017.2630-6-hungen3108@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af4fe07a9d ]
Add support for the solar-charging Logitech K980 keyboard, over
Bluetooth. Bolt traffic doesn't get routed through logitech-dj, so
this code isn't triggered when Bolt is used.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4923bbff0b ]
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In nct7363_present_pwm_fanin, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_9717645269E4C07D3D131F52201E12E5E10A@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4a3d6f79c ]
Add hardware monitoring support for the Fintek F81968 Super I/O chip.
It is fully compatible with F81866.
Several products share compatibility with the F81866. To better distinguish
between them, ensure that the Product ID is displayed when the device is
probed.
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Link: https://lore.kernel.org/r/20251223051040.10227-1-peter_hong@fintek.com.tw
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2954ce672b ]
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In emc2305_of_parse_pwm_child, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_738BA80BBF28F3440301EEE6F9E470165105@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0fa7879c9 ]
Add support for customer ID 0x1621 found on ASRock Z590 Taichi
boards using the Nuvoton NCT6686D embedded controller.
This allows the driver to instantiate without requiring the
force=1 module parameter.
Tested on two separate ASRock Z590 Taichi boards, both with
EC firmware version 1.0 build 01/25/21.
Signed-off-by: Anj Duvnjak <avian@extremenerds.net>
Link: https://lore.kernel.org/r/20251222220942.10762-1-avian@extremenerds.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 246167b17c ]
Boards Pro WS WRX90E-SAGE SE has got a nct6775 chip, but by default there's
no use of it because of resource conflict with WMI method.
Add the board to the WMI monitoring list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Marcus <shoes2ga@gmail.com>
Link: https://lore.kernel.org/r/20251231155316.2048-1-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46c3e87a79 ]
The Dell OptiPlex 7080 supports the legacy SMM interface for reading
sensors and performing fan control. Whitelist this machine so that
this driver loads automatically.
Closes: https://github.com/Wer-Wolf/i8kutils/issues/16
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://lore.kernel.org/r/20260104000654.6406-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d14d8364 ]
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260130091904.3426149-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 612227b392 ]
In the remove path, we should try hard to perform all steps as we simply
cannot fail.
The "no runtime PM" quirk must only alter the state of the RPM core, but
the clocks should still be disabled if that is possible. Move the
disable call outside of the RPM quirk.
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal (Schneider Electric) <miquel.raynal@bootlin.com>
Tested-by: Santhosh Kumar K <s-k6@ti.com>
Link: https://patch.msgid.link/20260122-schneider-6-19-rc1-qspi-v4-9-f9c21419a3e6@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8079b87c02 ]
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15b1d7b77e ]
[Why]
When usb4 link training fails, the dpia sym clock will be disabled and SYMCLK
source should be changed back to phy clock. In enable_streams, it is
assumed that link training succeeded and will switch from refclk to
phy clock. But phy clk here might not be on. Dig reg access timeout
will occur.
[How]
When enable_stream is hit, check if link training failed for usb4.
If it did, fall back to the ref clock to avoid reg access timeout.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Zhongwei <Zhongwei.Zhang@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdad086702 ]
Using >=, <= for checking the family is not always correct.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53f826ff5e ]
spi_mem_dirmap_create() may reconfigure controller-wide settings,
which can interfere with concurrent transfers to other devices
sharing the same SPI controller but using different chip selects.
Wrap the ->dirmap_create() callback with spi_mem_access_start() and
spi_mem_access_end() to serialize access and prevent cross-CS
interference during dirmap creation.
This patch has been verified on a setup where a SPI TPM is connected
to CS0 of a SPI controller, while a SPI NOR flash is connected to CS1
of the same controller. Without this patch, spi_mem_dirmap_create()
for the SPI NOR flash interferes with ongoing SPI TPM data transfers,
resulting in failure to create the TPM device. This was tested on an
ASPEED AST2700 EVB.
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://patch.msgid.link/20260120123005.1392071-2-chin-ting_kuo@aspeedtech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74823db9ba ]
Add check for the return value of devm_regmap_init_mmio() and return the
error if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260127033250.2044608-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e18533b023 ]
Use module_platform_driver() to replace module_platform_driver_probe().
The former utilizes platform_driver_register(), which allows the driver to
defer probing when it doesn't acquire the necessary resources due to probe
order. In contrast, the latter uses __platform_driver_probe(), which
includes the comment "Note that this is incompatible with deferred
probing." Since our SGPIO driver requires access to the clock resource, the
former is more suitable.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Link: https://lore.kernel.org/r/20260123-upstream_sgpio-v2-1-69cfd1631400@aspeedtech.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc051fbd7f ]
The LG Gram Style 14 (14Z90RS-G.AD77F, SSID 1854:0490) with Realtek ALC298
shows normal routing and volume changes, but internal speakers stay silent
unless a userland HDA-verb workaround is applied.
Add a dedicated quirk for the LG Gram Style 14 that programs the codec
coefficient sequence used by the known workaround and enables the speaker
amps only during playback.
Tested-by: Damien Dagorn <damien.dagorn29@gmail.com>
Signed-off-by: Damien Dagorn <damien.dagorn29@gmail.com>
Link: https://lore.kernel.org/CAN59QMUhd4kHrkRoJA6VzEr2VKezN2yjHnANaQoZn2-Bnwe3bQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2581ea2d9 ]
The headset microphone on the MECHREVO Wujie 15X Pro requires the
CXT_FIXUP_HEADSET_MIC quirk to function properly. Add the PCI SSID
(0x1d05:0x3012) to the quirk table.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-5-550230171hxy@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d9f32e02c ]
Some devices, such as the Grandstream GUV3100 and the LSK Meeting Eye
for Business & Home, exhibit entity ID collisions between units and
streaming output terminals.
The UVC specification requires unit and terminal IDs to be unique, and
uses the ID to reference entities:
- In control requests, to identify the target entity
- In the UVC units and terminals descriptors' bSourceID field, to
identify source entities
- In the UVC input header descriptor's bTerminalLink, to identify the
terminal associated with a streaming interface
Entity ID collisions break accessing controls and make the graph
description in the UVC descriptors ambiguous. However, collisions where
one of the entities is a streaming output terminal and the other entity
is not a streaming terminal are less severe. Streaming output terminals
have no controls, and, as they are the final entity in pipelines, they
are never referenced in descriptors as source entities. They are
referenced by ID only from innput header descriptors, which by
definition only reference streaming terminals.
For these reasons, we can work around the collision by giving streaming
output terminals their own ID namespace. Do so by setting bit
UVC_TERM_OUTPUT (15) in the uvc_entity.id field, which is normally never
set as the ID is a 8-bit value.
This ID change doesn't affect the entity name in the media controller
graph as the name isn't constructed from the ID, so there should not be
any impact on the uAPI.
Although this change handles some ID collisions automagically, keep
printing an error in uvc_alloc_new_entity() when a camera has invalid
descriptors. Hopefully this message will help vendors fix their invalid
descriptors.
This new method of handling ID collisions includes a revert of commit
758dbc756a ("media: uvcvideo: Use heuristic to find stream entity")
that attempted to fix the problem urgently due to regression reports.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Lili Orosz <lily@floofy.city>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251113210400.28618-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e4ac86b2d ]
Add support for the for the EXC3188 touchscreen from eGalaxy.
Signed-off-by: Thorsten Schmelzer <tschmelzer@topcon.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a625dc4989 ]
[Why&How]
This reverts commit 14bb17cc37.
Due to the change, the display shows garbage on startup.
We have an alternative solution for the original issue:
d24203bb62 ("drm/amd/display: Re-check seamless boot can be enabled or not")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wang, Sung-huai <Danny.Wang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a50f2b611 ]
The rkisp1_flt_config() function performs an initial direct write to
RKISP1_CIF_ISP_FILT_MODE without including the RKISP1_CIF_ISP_FLT_ENA
bit, which clears the filter enable bit in the hardware.
The subsequent read/modify/write sequence then reads back the register
with the enable bit already cleared and cannot restore it, resulting in
the filter being inadvertently disabled.
Remove the redundant direct write. The read/modify/write sequence alone
correctly preserves the existing enable bit state while updating the
DNR mode and filter configuration bits.
Signed-off-by: Rui Wang <rui.wang@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260105171142.147792-2-rui.wang@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc84778723 ]
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
another DRM client (e.g. fbdev) is still attached:
=============================================================================
BUG kmalloc-64 (Not tainted): Poison overwritten
-----------------------------------------------------------------------------
0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b
FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b
Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0
pid=29
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_framebuffer_remove+0x4cc/0x5a8
drm_mode_rmfb_work_fn+0x6c/0x80
process_one_work+0x12c/0x2cc
worker_thread+0x2a8/0x400
kthread+0xc0/0xdc
ret_from_fork+0x14/0x28
Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0
pid=169
drm_atomic_helper_commit_hw_done+0x100/0x150
drm_atomic_helper_commit_tail+0x64/0x8c
commit_tail+0x168/0x18c
drm_atomic_helper_commit+0x138/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0
flags=0x200(workingset|zone=0)
Object 0xc611b340 @offset=832 fp=0xc611b7c0
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-2-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06682206e2 ]
Don’t reject the commit when the source rectangle has fractional parts.
This can occur due to scaling: drm_atomic_helper_check_plane_state() calls
drm_rect_clip_scaled(), which may introduce fractional parts while
computing the clipped source rectangle. This does not imply the commit is
invalid, so we should accept it instead of discarding it.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251120-lcd_scaling_fix-v1-1-5ffc98557923@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f123524710 ]
After several commits, the slab memory increases. Some drm_crtc_commit
objects are not freed. The atomic_destroy_state callback only put the
framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function
to put all the objects that are no longer needed.
It has been seen after hours of usage of a graphics application or using
kmemleak:
unreferenced object 0xc63a6580 (size 64):
comm "egt_basic", pid 171, jiffies 4294940784
hex dump (first 32 bytes):
40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:.
8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:.
backtrace (crc c25aa925):
kmemleak_alloc+0x34/0x3c
__kmalloc_cache_noprof+0x150/0x1a4
drm_atomic_helper_setup_commit+0x1e8/0x7bc
drm_atomic_helper_commit+0x3c/0x15c
drm_atomic_commit+0xc0/0xf4
drm_atomic_helper_set_config+0x84/0xb8
drm_mode_setcrtc+0x32c/0x810
drm_ioctl+0x20c/0x488
sys_ioctl+0x14c/0xc20
ret_fast_syscall+0x0/0x54
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-1-79b615130dc3@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4589712e01 ]
[Why]
We're missing the code to actually disable the link output when we have
to leave the SYMCLK_ON but the TX remains OFF.
[How]
Port the code from DCN401 that detects SYMCLK_ON_TX_OFF and disable
the link output when the backend is reset.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cee62904c ]
[why & how]
VBIOS DMCUB FW can enable FEC for capable eDPs, but S/W DC state is
only updated for link0 when transitioning into OS with driver loaded.
This causes issues when the eDP is immediately hidden and DIG0 is
assigned to another link that does not support FEC. Driver will
attempt to disable FEC but FEC enablement occurs based on the link
state, which does not have fec_state updated since it is a different
link. Thus, FEC disablement on DIG0 will get skipped and cause no
light up.
Reviewed-by: Karen Chen <karen.chen@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b190870e0e ]
Add Nova Lake (NVL) audio Device ID
The ID will be used by HDA legacy, SOF audio stack and the driver
to determine which audio stack should be used (intel-dsp-config).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260120193507.14019-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08c0989996 ]
rt722 is aggregated with rt1320 amp in arl_rt722_l0_rt1320_l2 and it is
the only audio configuration in the ARL platform. Set .aggregated = 1 to
represent the fact and avoid unexpected issue.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260119091749.1752088-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c25d01e1c4 ]
The unpacked unions within a packed struct generates alignment warnings
on clang for 32-bit ARM:
./usr/include/linux/vbox_vmmdev_types.h:239:4: error: field u within 'struct vmmdev_hgcm_function_parameter32'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:223:2)'
and is usually due to 'struct vmmdev_hgcm_function_parameter32' being packed,
which can lead to unaligned accesses [-Werror,-Wunaligned-access]
239 | } u;
| ^
./usr/include/linux/vbox_vmmdev_types.h:254:6: error: field u within
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
is less aligned than 'union (unnamed union at ./usr/include/linux/vbox_vmmdev_types.h:251:4)' and is usually due to
'struct vmmdev_hgcm_function_parameter64::(anonymous union)::(unnamed at ./usr/include/linux/vbox_vmmdev_types.h:249:3)'
being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
With the recent changes to compile-test the UAPI headers in more cases,
these warning in combination with CONFIG_WERROR breaks the build.
Fix the warnings.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512140314.DzDxpIVn-lkp@intel.com/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/linux-kbuild/20260110-uapi-test-disable-headers-arm-clang-unaligned-access-v1-1-b7b0fa541daa@kernel.org/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-kbuild/29b2e736-d462-45b7-a0a9-85f8d8a3de56@app.fastmail.com/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260115-kbuild-alignment-vbox-v1-2-076aed1623ff@linutronix.de
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64aa8b3a60 ]
Since commit 56de5e305d ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L")
we may get the following kernel panic, for some panels, when rebooting:
systemd-shutdown[1]: Rebooting.
Call trace:
...
do_serror+0x28/0x68
el1h_64_error_handler+0x34/0x50
el1h_64_error+0x6c/0x70
rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P)
mipi_dsi_device_transfer+0x44/0x58
mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4
ili9881c_unprepare+0x38/0x88
drm_panel_unprepare+0xbc/0x108
This happens for panels that need to send MIPI-DSI commands in their
unprepare() callback. Since the MIPI-DSI interface is stopped at that
point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic.
Fix by moving rzg2l_mipi_dsi_stop() to new callback function
rzg2l_mipi_dsi_atomic_post_disable().
With this change we now have the correct power-down/stop sequence:
systemd-shutdown[1]: Rebooting.
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry
ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry
rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry
reboot: Restarting system
Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260112154333.655352-1-hugo@hugovil.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26b4309a3a ]
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits.
Signed-off-by: Xiao Kan <814091656@qq.com>
Signed-off-by: Xiao Kan <xiao.kan@samsung.com>
Link: https://patch.msgid.link/tencent_D12AA2DEDE6F359E1AF59405242FB7A5FD05@qq.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c16000166 ]
In svm_migrate_gart_map(), while migrating GART mapping, the number of
bytes copied for the GART table only accounts for CPU pages. On non-4K
systems, each CPU page can contain multiple GPU pages, and the GART
requires one 8-byte PTE per GPU page. As a result, an incorrect size was
passed to the DMA, causing only a partial update of the GART table.
Fix this function to work correctly on non-4K page-size systems by
accounting for the number of GPU pages per CPU page when calculating the
number of bytes to be copied.
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42ea9cf2f1 ]
HW-supported EOP buffer sizes are 4K and 32K. On systems that do not
use 4K pages, the minimum buffer object (BO) allocation size is
PAGE_SIZE (for example, 64K). During queue buffer acquisition, the driver
currently checks the allocated BO size against the supported EOP buffer
size. Since the allocated BO is larger than the expected size, this check
fails, preventing queue creation.
Relax the strict size validation and allow PAGE_SIZE-sized BOs to be used.
Only the required 4K region of the buffer will be used as the EOP buffer
and avoids queue creation failures on non-4K page systems.
Acked-by: Christian König <christian.koenig@amd.com>
Suggested-by: Philip Yang <yangp@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72919c57a0 ]
HP Victus 16-e0xxx with ALC245 codec does not handle the toggling of
the mute LED.
This patch adds a quirk entry for subsystem ID 0x88eb using a new
ALC245_FIXUP_HP_MUTE_LED_V2_COEFBIT fixup, enabling correct mute LED
behavior.
Signed-off-by: Bharat Dev Burman <bharat.singh7924@gmail.com>
Link: https://patch.msgid.link/20260112184253.33376-1-bharat.singh7924@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b08b7007e ]
Close the firmware stream even when disabling a stream on an upstream
sub-device fails. This allows the firmware to release resources related to
a stream that is stopped in any case.
Suggested-by: Bingbu Cao <bingbu.cao@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5925a92cc7 ]
When enabling streaming fails, the stream is stopped in firmware but not
closed. Do this to release resources on firmware side.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Mehdi Djait <mehdi.djait@linux.intel.com> # Dell XPS 9315
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
