[ Upstream commit 944b6b216c ]
KCSAN reported a data-race on the `ipvs->enable` flag, which is
written in the control path and read concurrently from many other
contexts.
Following a suggestion by Julian, this patch fixes the race by
converting all accesses to use `WRITE_ONCE()/READ_ONCE()`.
This lightweight approach ensures atomic access and acts as a
compiler barrier, preventing unsafe optimizations where the flag
is checked in loops (e.g., in ip_vs_est.c).
Additionally, the `enable` checks in the fast-path hooks
(`ip_vs_in_hook`, `ip_vs_out_hook`, `ip_vs_forward_icmp`) are
removed. These are unnecessary since commit 857ca89711
("ipvs: register hooks only with services"). The `enable=0`
condition they check for can only occur in two rare and non-fatal
scenarios: 1) after hooks are registered but before the flag is set,
and 2) after hooks are unregistered on cleanup_net. In the worst
case, a single packet might be mishandled (e.g., dropped), which
does not lead to a system crash or data corruption. Adding a check
in the performance-critical fast-path to handle this harmless
condition is not a worthwhile trade-off.
Fixes: 857ca89711 ("ipvs: register hooks only with services")
Reported-by: syzbot+1651b5234028c294c339@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1651b5234028c294c339
Suggested-by: Julian Anastasov <ja@ssi.bg>
Link: https://lore.kernel.org/lvs-devel/2189fc62-e51e-78c9-d1de-d35b8e3657e3@ssi.bg/
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba941796d7 ]
Since the ahash_region() macro was redefined to calculate the region
index solely from HTABLE_REGION_BITS, the htable_bits parameter became
unused.
Remove the unused htable_bits argument and its call sites, simplifying
the code without changing semantics.
Fixes: 8478a729c0 ("netfilter: ipset: fix region locking in hash types")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372fdb5c75 ]
When using KSM (Key Scatter-gather Memory) access mode, the HW requires
the IOVA to be aligned to the selected page size.
Without this alignment, the HW may not function correctly.
Currently, mlx5_umem_mkc_find_best_pgsz() does not filter out page sizes
that would result in misaligned IOVAs for KSM mode. This can lead to
selecting page sizes that are incompatible with the given IOVA.
Fix this by filtering the page size bitmap when in KSM mode, keeping
only page sizes to which the IOVA is aligned to.
Fixes: fcfb03597b ("RDMA/mlx5: Align mkc page size capability check to PRM")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250824144839.154717-1-edwards@nvidia.com
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a3aaaa9fc ]
This variable used in the error path was not defined according to Ruff.
msg_format.attr_set is used instead, presumably the one that was
supposed to be used originally.
This is linked to Ruff error F821 [1]:
An undefined name is likely to raise NameError at runtime.
Fixes: 1769e2be4b ("tools/net/ynl: Add 'sub-message' attribute decoding to ynl")
Link: https://docs.astral.sh/ruff/rules/undefined-name/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-1-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1c4350327 ]
The comparison function cmp_loc_by_count() used for sorting stack trace
locations in debugfs currently returns -1 if a->count > b->count and 1
otherwise. This breaks the antisymmetry property required by sort(),
because when two counts are equal, both cmp(a, b) and cmp(b, a) return
1.
This can lead to undefined or incorrect ordering results. Fix it by
updating the comparison logic to explicitly handle the case when counts
are equal, and use cmp_int() to ensure the comparison function adheres
to the required mathematical properties of antisymmetry.
Fixes: 553c0369b3 ("mm/slub: sort debugfs output by frequency of stack traces")
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f5c69c4d ]
Fix iio_convert_raw_to_processed() offset handling for channels without
a scale attribute.
The offset has been applied to the raw64 value not to the original raw
value. Use the raw64 value so that the offset is taken into account.
Fixes: 14b457fdde ("iio: inkern: apply consumer scale when no channel scale is available")
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-3-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f85406bf8 ]
There is an issue with the handling of negative channel scales
in iio_convert_raw_to_processed_unlocked() when the channel-scale
is of the IIO_VAL_INT_PLUS_[MICRO|NANO] type:
Things work for channel-scale values > -1.0 and < 0.0 because of
the use of signed values in:
*processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL);
Things will break however for scale values < -1.0. Lets for example say
that raw = 2, (caller-provided)scale = 10 and (channel)scale_val = -1.5.
The result should then be 2 * 10 * -1.5 = -30.
channel-scale = -1.5 means scale_val = -1 and scale_val2 = 500000,
now lets see what gets stored in processed:
1. *processed = raw64 * scale_val * scale;
2. *processed += raw64 * scale_val2 * scale / 1000000LL;
1. Sets processed to 2 * -1 * 10 = -20
2. Adds 2 * 500000 * 10 / 1000000 = 10 to processed
And the end result is processed = -20 + 10 = -10, which is not correct.
Fix this by always using the abs value of both scale_val and scale_val2
and if either is negative multiply the end-result by -1.
Note there seems to be an unwritten rule about negative
IIO_VAL_INT_PLUS_[MICRO|NANO] values that:
i. values > -1.0 and < 0.0 are written as val=0 val2=-xxx
ii. values <= -1.0 are written as val=-xxx val2=xxx
But iio_format_value() will also correctly display a third option:
iii. values <= -1.0 written as val=-xxx val2=-xxx
Since iio_format_value() uses abs(val) when val2 < 0.
This fix also makes iio_convert_raw_to_processed() properly handle
channel-scales using this third option.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Cc: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-2-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc7117da8 ]
Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.
syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.
Reject such cases by verifying that the bitmap is not empty when index
blocks exist.
Reported-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0373017f711c06ada64
Fixes: d99208b919 ("fs/ntfs3: cancle set bad inode after removing name fails")
Tested-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 736fc7bf5f ]
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebccbfea4 ]
Currently, sta_set_sinfo() fails to populate link-level station info
when sinfo->valid_links is initially 0 and sta->sta.valid_links has
bits set for links other than link 0. This typically occurs when
association happens on a non-zero link or link 0 deleted dynamically.
In such cases, the for_each_valid_link(sinfo, link_id) loop only
executes for link 0 and terminates early, since sinfo->valid_links
remains 0. As a result, only MLD-level information is reported to
userspace.
Hence to fix, initialize sinfo->valid_links with sta->sta.valid_links
before entering the loop to ensure loop executes for each valid link.
During iteration, mask out invalid links from sinfo->valid_links if
any of sta->link[link_id], sdata->link[link_id], or sinfo->links[link_id]
are not present, to report only valid link information.
Fixes: 505991fba9 ("wifi: mac80211: extend support to fill link level sinfo structure")
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250904104054.790321-1-quic_sarishar@quicinc.com
[clarify comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88ec0e01a8 ]
Change 'ret' from unsigned long to int, as storing negative error codes
in an unsigned long makes it never equal to -ETIMEDOUT, causing logical
errors.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/671100/
Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fab94bcf3 ]
Blamed commit added a critical false sharing on a single
atomic_long_t under DOS, like receiving UDP packets
to closed ports.
Per netns ICMP6_MIB_RATELIMITHOST tracking uses per-cpu
storage and is enough, we do not need per-device and slow tracking.
Fixes: d0941130c9 ("icmp: Add counters for rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Cc: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://patch.msgid.link/20250905165813.1470708-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac1fb229 ]
Use ARRAY_SIZE(), so that we know the limit at compile time.
Following patch needs this preliminary change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250905165813.1470708-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2fab94bcf3 ("ipv6: snmp: do not track per idev ICMP6_MIB_RATELIMITHOST")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4336efb59e ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 64484ccee7 ("ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-4-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba404e4b4 ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.
This patch corrects the input mapping to the certain default value if
an invalid value is passed.
Fixes: 063422ca2a ("ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-3-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20eb0e8de ]
When an invalid value is passed via quirk option, currently
bytcht_es8316 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 249d2fc9e5 ("ASoC: Intel: bytcht_es8316: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-2-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20edbacc0 ]
No idea what the current barrier position was meant for. At that point,
nothing is read from the descriptor, only the pointer to the actual one
is fetched.
The correct barrier usage here is after the generation check, so that
only the first qword is read if the descriptor is not yet ready and we
need to stop polling. Debatable on coherent DMA as the Rx descriptor
size is <= cacheline size, but anyway, the current barrier position
only makes the codegen worse.
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94fc6d356 ]
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672559/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc64568b52 ]
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU for an MDP4 device.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672557/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b34ba664 ]
The header file "fw/img.h" is already included on line 9. Remove the
redundant include.
Fixes: 2594e4d9e1 ("wifi: iwlwifi: prepare for reading SAR tables from UEFI")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250819121201.608770-2-liaoyuanhong@vivo.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3bef68a6 ]
We need to reject the MAP op if offset+range is larger than the BO size.
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: 2e6a8a1fe2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669781/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278f890443 ]
If we fail a handle-lookup part way thru, we need to drop the already
obtained obj references.
Fixes: 2e6a8a1fe2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669784/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0531cdba5 ]
Similar to previous commit 2a934fdb01 ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case.
Link: https://lore.kernel.org/all/20250827065010.3208525-1-wangliang74@huawei.com/
Fixes: c79a39dc8d ("pps: Fix a use-after-free")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-By: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20250830075023.3498174-1-wangliang74@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b26053819 ]
There is a dev_err message that is reporting the value of
cmd->asiv_length when it should be reporting cmd->asv_length
instead. Fix this.
Fixes: eaf4722d46 ("GenWQE Character device and DDCB queue")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250902113712.2624743-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf0b3c243 ]
Currently gsm_queue() processes incoming frames and when opening
a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().
If basic mode is used it calls gsm_modem_upd_via_msc() and it
cannot block the input queue by waiting the response to come
into the same input queue.
Instead allow sending Modem Status Command without waiting for remote
end to respond. Define a new function gsm_modem_send_initial_msc()
for this purpose. As MSC is only valid for basic encoding, it does
not do anything for advanced or when convergence layer type 2 is used.
Fixes: 4847380250 ("tty: n_gsm: fix missing update of modem controls after DLCI open")
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Link: https://lore.kernel.org/r/20250827123221.1148666-1-seppo.takalo@nordicsemi.no
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e271cc0d25 ]
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
An example of this as follows:
echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC #succeed
stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC #fail to connect on Windows
This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b570b346dd ]
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67ba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbda64f3f5 ]
Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.
Fixes: 42de677f79 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f92385309 ]
If the receive queue contains payload that was already
received, __tcp_close() can send an unexpected RST.
Refine the code to take tp->copied_seq into account,
as we already do in tcp recvmsg().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20250903084720.1168904-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37bf0f4e39 ]
Add lane equalization setting for 8.0 GT/s and 32.0 GT/s to enhance link
stability and avoid AER Correctable Errors reported on some platforms
(eg. SA8775P).
8.0 GT/s, 16.0 GT/s and 32.0 GT/s require the same equalization setting.
This setting is programmed into a group of shadow registers, which can be
switched to configure equalization for different speeds by writing 00b,
01b and 10b to `RATE_SHADOW_SEL`.
Hence, program equalization registers in a loop using link speed as index,
so that equalization setting can be programmed for 8.0 GT/s, 16.0 GT/s
and 32.0 GT/s.
Fixes: 489f14be0e ("arm64: dts: qcom: sa8775p: Add pcie0 and pcie1 nodes")
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Ziyue Zhang <ziyue.zhang@oss.qualcomm.com>
[mani: wrapped the warning to fit 100 columns, used post-increment for loop]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250904065225.1762793-2-ziyue.zhang@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b75dcb1e ]
Commit 78a7a126dc ("wifi: mac80211: validate SCAN_FLAG_AP in scan request
during MLO") introduced a check that rejects scan requests if any link is
already beaconing. This works fine when all links share the same radio, but
breaks down in multi-radio setups.
Consider a scenario where a 2.4 GHz link is beaconing and a scan is
requested on a 5 GHz link, each backed by a different physical radio. The
current logic still blocks the scan, even though it should be allowed. As a
result, interface bring-up fails unnecessarily in valid configurations.
Fix this by checking whether the scan is being requested on the same
underlying radio as the beaconing link. Only reject the scan if it targets
a link that is already beaconing and the NL80211_FEATURE_AP_SCAN is not
set. This ensures correct behavior in multi-radio environments and avoids
false rejections.
Fixes: 78a7a126dc ("wifi: mac80211: validate SCAN_FLAG_AP in scan request during MLO")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250812-fix_scan_ap_flag_requirement_during_mlo-v4-3-383ffb6da213@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1a8805e5d ]
Fix incorrect argument order in devm_kcalloc() when allocating port->phys.
The original call used sizeof(phy) as the number of elements and
port->lanes as the element size, which is reversed. While this happens to
produce the correct total allocation size with current pointer size and
lane counts, the argument order is wrong.
Fixes: 6fe7c187e0 ("PCI: tegra: Support per-lane PHYs")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[mani: added Fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250819150436.3105973-1-alok.a.tiwari@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74e2ef72bd ]
Cypress(Infineon) is not the vendor for this 43752 SDIO WLAN chip, and so
has not officially released any firmware binary for it. It is incorrect to
maintain this WLAN chip with firmware vendor ID as "CYW". So relabel the
chip's firmware Vendor ID as "WCC" as suggested by the maintainer.
Fixes: d2587c57ff ("brcmfmac: add 43752 SDIO ids and initialization")
Fixes: f74f1ec22d ("wifi: brcmfmac: add support for Cypress firmware api")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250724101136.6691-1-gokulkumar.sivakumar@infineon.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56819d00bc ]
The world regulatory domain is a restrictive subset of channel
configurations which allows legal operation of the adapter all over the
world. Changing to this domain should not be prevented.
Fixes: dd4a9ac05c ("mwifiex: send regulatory domain info to firmware only if alpha2 changed") changed
Signed-off-by: Stefan Kerkmann <s.kerkmann@pengutronix.de>
Reviewed-by: Jeff Chen <jeff.chen_1@nxp.con>
Link: https://patch.msgid.link/20250804-fix-mwifiex-regulatory-domain-v1-1-e4715c770c4d@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7009e3af04 ]
Port of commit 227545b9a0 ("drm/radeon/dpm: Disable sclk
switching on Oland when two 4K 60Hz monitors are connected")
This is an ad-hoc DPM fix, necessary because we don't have
proper bandwidth calculation for DCE 6.
We define "high pixelclock" for SI as higher than necessary
for 4K 30Hz. For example, 4K 60Hz and 1080p 144Hz fall into
this category.
When two high pixel clock displays are connected to Oland,
additionally disable shader clock switching, which results in
a higher voltage, thereby addressing some visible flickering.
v2:
Add more comments.
v3:
Split into two commits for easier review.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed3803533c ]
According to pp_pm_compute_clocks the non-DC display code
has "issues with mclk switching with refresh rates over 120 hz".
The workaround is to disable MCLK switching in this case.
Do the same for legacy DPM.
Fixes: 6ddbd37f10 ("drm/amd/pm: optimize the amdgpu_pm_compute_clocks() implementations")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9003a07468 ]
Some parts of the code base expect that MCLK switching is turned
off when the vblank time is set to zero.
According to pp_pm_compute_clocks the non-DC code has issues
with MCLK switching with refresh rates over 120 Hz.
v3:
Add code comment to explain this better.
Add an if statement instead of changing the switch_limit.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce02513012 ]
Based on some comments in dm_pp_display_configuration
above the crtc_index and line_time fields, these values
are programmed to the SMC to work around an SMC hang
when it switches MCLK.
According to Alex, the Windows driver programs them to:
mclk_change_block_cp_min = 200 / line_time
mclk_change_block_cp_max = 100 / line_time
Let's use the same for the sake of consistency.
Previously we used the watermark values, but it seemed buggy
as the code was mixing up low/high and A/B watermarks, and
was not saving a low watermark value on DCE 6, so
mclk_change_block_cp_max would be always zero previously.
Split this change off from the previous si_upload_smc_data
to make it easier to bisect, in case it causes any issues.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a43b2cec04 ]
The si_upload_smc_data function uses si_write_smc_soft_register
to set some register values in the SMC, and expects the result
to be PPSMC_Result_OK which is 1.
The PPSMC_Result_OK / PPSMC_Result_Failed values are used for
checking the result of a command sent to the SMC.
However, the si_write_smc_soft_register actually doesn't send
any commands to the SMC and returns zero on success,
so this check was incorrect.
Fix that by not checking the return value, just like other
calls to si_write_smc_soft_register.
v3:
Additionally, when no display is plugged in, there is no need
to restrict MCLK switching, so program the registers to zero.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a0c3a4035 ]
Always send PPSMC_MSG_DisableULV to the SMC, even if ULV mode
is unsupported, to make sure it is properly turned off.
v3:
Simplify si_disable_ulv further.
Always check the return value of amdgpu_si_send_msg_to_smc.
Fixes: 841686df9f ("drm/amdgpu: add SI DPM support (v4)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c661219cd7 ]
Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.
When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.
v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.
Fixes: b38f3e80ec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12d9a9dd9d ]
Ensure that etm_perf_add_symlink_sink() is only called for devices
that implement the alloc_buffer operation. This prevents invalid
symlink creation for dummy sinks that do not implement alloc_buffer.
Without this check, perf may attempt to use a dummy sink that lacks
alloc_buffer operationsu to initialise perf's ring buffer, leading
to runtime failures.
Fixes: 9d3ba0b6c0 ("Coresight: Add coresight dummy driver")
Signed-off-by: Yuanfang Zhang <quic_yuanfang@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250630-etm_perf_sink-v1-1-e4a7211f9ad7@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52c0164b25 ]
DEN0154 states that hardware will be allowed to ignore writes to TRB*
registers while the trace buffer is enabled. Add an ISB to ensure that
it's disabled before clearing the other registers.
This is purely defensive because it's expected that arm_trbe_disable()
would be called before teardown which has the required ISB.
Fixes: a2b579c41f ("coresight: trbe: Remove redundant disable call")
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250609-james-cs-trblimitr-isb-v1-1-3a2aa4ee6770@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ea95d55e6 ]
Commit 790fb9956e ("linux/dmaengine.h: fix a few kernel-doc
warnings") inserted new documentation for @desc_free in the middle of
@tx_submit's description.
Put @tx_submit's description back together, matching the indentation
style of the rest of the documentation for dma_async_tx_descriptor.
Fixes: 790fb9956e ("linux/dmaengine.h: fix a few kernel-doc warnings")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250826-dma_async_tx_desc-tx_submit-doc-fix-v1-1-18a4b51697db@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59f26d86b2 ]
We need to check socket netns before considering them in ping_get_port().
Otherwise, one malicious netns could 'consume' all ports.
Add corresponding check in ping_lookup().
Fixes: c319b4d76b ("net: ipv4: add IPPROTO_ICMP socket kind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://patch.msgid.link/20250829153054.474201-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
