commit 835745a377 upstream.
The `nouveau_dmem_copy_one` function ensures that the copy push command is
sent to the device firmware but does not track whether it was executed
successfully.
In the case of a copy error (e.g., firmware or hardware failure), the
copy push command will be sent via the firmware channel, and
`nouveau_dmem_copy_one` will likely report success, leading to the
`migrate_to_ram` function returning a dirty HIGH_USER page to the user.
This can result in a security vulnerability, as a HIGH_USER page that may
contain sensitive or corrupted data could be returned to the user.
To prevent this vulnerability, we allocate a zero page. Thus, in case of
an error, a non-dirty (zero) page will be returned to the user.
Fixes: 5be73b6908 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Yonatan Maman <Ymaman@Nvidia.com>
Co-developed-by: Gal Shalom <GalShalom@Nvidia.com>
Signed-off-by: Gal Shalom <GalShalom@Nvidia.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241008115943.990286-3-ymaman@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff599ef697 ]
[WHAT & HOW]
se is null checked previously in the same function, indicating
it might be null; therefore, it must be checked when used again.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Acked-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b44aa559d ]
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes: f4a6de855e ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ae7a6211f ]
The RK3399 has a 1024-entry gamma LUT with 10 bits per component on its
"big" VOP and a 256-entry, 8 bit per component LUT on the "little" VOP.
Compared to the RK3288, it no longer requires disabling gamma while
updating the LUT. On the RK3399, the LUT can be updated at any time as
the hardware has two LUT buffers, one can be written while the other is
in use. A swap of the buffers is triggered by writing 1 to the
update_gamma_lut register.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-3-sigmaris@gmail.com
Stable-dep-of: 6b44aa559d ("drm/rockchip: vop: clear DMA stop bit on RK3066")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ba000d6ae ]
The VOP on RK3399 has a different approach from previous versions for
setting a gamma lookup table, using an update_gamma_lut register. As
this differs from RK3288, give RK3399 its own set of "common" register
definitions.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com>
Tested-by: "Milan P. Stanić" <mps@arvanta.net>
Tested-by: Linus Heckemann <git@sphalerite.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019215843.42718-2-sigmaris@gmail.com
Stable-dep-of: 6b44aa559d ("drm/rockchip: vop: clear DMA stop bit on RK3066")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87d749a6aa ]
The issue with panel power savings compatibility below
`AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` happens at
`AMDGPU_DM_DEFAULT_MIN_BACKLIGHT` as well.
That issue will be fixed separately, so don't prevent the backlight
brightness from going that low.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/amd-gfx/be04226a-a9e3-4a45-a83b-6d263c6557d8@t-8ch.de/T/#m400dee4e2fc61fe9470334d20a7c8c89c9aef44f
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 52d4e3fb3d upstream.
[Why]
Connected with a Thunderbolt monitor and do the suspend and the system
may hang while resume.
The TBT monitor HPD will be triggered during the resume procedure
and call the drm_client_modeset_probe() while
struct drm_connector connector->dev->master is NULL.
It will mess up the pipe topology after resume.
[How]
Skip the TBT monitor HPD during the resume procedure because we
currently will probe the connectors after resume by default.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 453f86a269)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4286cc2c95 upstream.
Without the locking amdgpu currently can race between
amdgpu_ctx_set_entity_priority() (via drm_sched_entity_modify_sched()) and
drm_sched_job_arm(), leading to the latter accesing potentially
inconsitent entity->sched_list and entity->num_sched_list pair.
v2:
* Improve commit message. (Philipp)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: b37aced31e ("drm/scheduler: implement a function to modify sched list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Luben Tuikov <ltuikov89@gmail.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Philipp Stanner <pstanner@redhat.com>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913160559.49054-2-tursulin@igalia.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b0d2f6154 upstream.
FB_DAMAGE_CLIPS is a plane property for damage handling. Its UAPI
should only use UAPI types. Hence replace struct drm_rect with
struct drm_mode_rect in drm_atomic_plane_set_property(). Both types
are identical in practice, so there's no change in behavior.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/Zu1Ke1TuThbtz15E@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d3b2176782 ("drm: Add a new plane property to send damage during plane update")
Cc: Lukasz Spintzyk <lukasz.spintzyk@displaylink.com>
Cc: Deepak Rawat <drawat@vmware.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.0+
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923075841.16231-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c6dbab4632 ]
With -Werror:
In function ‘r100_cp_init_microcode’,
inlined from ‘r100_cp_init’ at drivers/gpu/drm/radeon/r100.c:1136:7:
include/linux/printk.h:465:44: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
465 | #define printk(fmt, ...) printk_index_wrap(_printk, fmt, ##__VA_ARGS__)
| ^
include/linux/printk.h:437:17: note: in definition of macro ‘printk_index_wrap’
437 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~~~~
include/linux/printk.h:508:9: note: in expansion of macro ‘printk’
508 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~
drivers/gpu/drm/radeon/r100.c:1062:17: note: in expansion of macro ‘pr_err’
1062 | pr_err("radeon_cp: Failed to load firmware \"%s\"\n", fw_name);
| ^~~~~~
Fix this by converting the if/else if/... construct into a proper
switch() statement with a default to handle the error case.
As a bonus, the generated code is ca. 100 bytes smaller (with gcc 11.4.0
targeting arm32).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53369581dc ]
We want to determine the size of the devcoredump before writing it out.
To that end, we will run the devcoredump printer with NULL data to get
the size, alloc data based on the generated offset, then run the
devcorecump again with a valid data pointer to print. This necessitates
not writing data to the data pointer on the initial pass, when it is
NULL.
v5:
- Better commit message (Jonathan)
- Add kerenl doc with examples (Jani)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4067f4fa04 ]
Variables, used as denominators and maybe not assigned to other values,
should not be 0. bytes_per_element_y & bytes_per_element_c are
initialized by get_bytes_per_element() which should never return 0.
This fixes 10 DIVIDE_BY_ZERO issues reported by Coverity.
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d81873f9e7 ]
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_hw_format` function in the DCN30 color
management module. The issue could occur when the index 'i' exceeds the
number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:180 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:181 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:182 cm3_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7e99058eb ]
Fixes index out of bounds issue in
`cm_helper_translate_curve_to_degamma_hw_format` function. The issue
could occur when the index 'i' exceeds the number of transfer function
points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:594 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:595 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:596 cm_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc50b614d5 ]
This commit addresses a potential index out of bounds issue in the
`cm3_helper_translate_curve_to_degamma_hw_format` function in the DCN30
color management module. The issue could occur when the index 'i'
exceeds the number of transfer function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, the function returns
false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:338 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:339 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_cm_common.c:340 cm3_helper_translate_curve_to_degamma_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35ff747c86 ]
[WHAT & HOW]
amdgpu_dm can pass a null stream to dc_is_stream_unchanged. It is
necessary to check for null before dereferencing them.
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c7795e245 ]
Enabling gfxoff quirk results in perfectly usable
graphical user interface on HP 705G4 DM with R5 2400G.
Without the quirk, X server is completely unusable as
every few seconds there is gpu reset due to ring gfx timeout.
Signed-off-by: Peng Liu <liupeng01@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d9e0803e ]
[WHY & HOW]
dc->clk_mgr is null checked previously in the same function, indicating
it might be null.
Passing "dc" to "dc->hwss.apply_idle_power_optimizations", which
dereferences null "dc->clk_mgr". (The function pointer resolves to
"dcn35_apply_idle_power_optimizations".)
This fixes 1 FORWARD_NULL issue reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66d71a7253 ]
This commit addresses a null pointer dereference issue in the
`commit_planes_for_stream` function at line 4140. The issue could occur
when `top_pipe_to_program` is null.
The fix adds a check to ensure `top_pipe_to_program` is not null before
accessing its stream_res. This prevents a null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4140 commit_planes_for_stream() error: we previously assumed 'top_pipe_to_program' could be null (see line 3906)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 327e62f47e upstream.
Currently amdgpu takes backlight caps provided by the ACPI tables
on systems as is. If the firmware sets maximums that are too low
this means that users don't get a good experience.
To avoid having to maintain a quirk list of such systems, do a sanity
check on the values. Check that the spread is at least half of the
values that amdgpu would use if no ACPI table was found and if not
use the amdgpu defaults.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3020
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c03fca619f upstream.
[WHY]
The calculated vtotal may has 1 line deviation. To get precisely
vtotal number, round the vtotal result.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 94ebc3d323 ]
cocci reported a double assignment problem. Upon reviewing previous
commits, it appears this may actually be an incorrect assignment.
Fixes: 8b9550344d ("drm/ipp: clean up debug messages")
Signed-off-by: Yuesong Li <liyuesong@vivo.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25b8507515 ]
The following build error was triggered because of NULL string argument:
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c: In function 'mdp5_smp_dump':
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
BUILDSTDERR: 352 | drm_printf(p, "%s:%d\t%d\t%s\n",
BUILDSTDERR: | ^~
BUILDSTDERR: drivers/gpu/drm/msm/disp/mdp5/mdp5_smp.c:352:51: error: '%s' directive argument is null [-Werror=format-overflow=]
This happens from the commit a61ddb4393 ("drm: enable (most) W=1
warnings by default across the subsystem"). Using "(null)" instead
to fix it.
Fixes: bc5289eed4 ("drm/msm/mdp5: add debugfs to show smp block status")
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/611071/
Link: https://lore.kernel.org/r/20240827165337.1075904-1-sherry.yang@oracle.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a30f9f65b5 ]
There is another cause for soft lock-up of GPU in empty ring-buffer:
race between GPU executing last commands and CPU checking ring for
emptiness. On GPU side IRQ for retire is triggered by CACHE_FLUSH_TS
event and RPTR shadow (which is used to check ring emptiness) is updated
a bit later from CP_CONTEXT_SWITCH_YIELD. Thus if GPU is executing its
last commands slow enough or we check that ring too fast we will miss a
chance to trigger switch to lower priority ring because current ring isn't
empty just yet. This can escalate to lock-up situation described in
previous patch.
To work-around this issue we keep track of last submit sequence number
for each ring and compare it with one written to memptrs from GPU during
execution of CACHE_FLUSH_TS event.
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612047/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d054c9b84 ]
cur_ctx_seqno already does the same thing, but handles the edge cases
where a refcnt'd context can live after lastclose. So let's not have
two ways to do the same thing.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20211109181117.591148-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Stable-dep-of: a30f9f65b5 ("drm/msm/a5xx: workaround early ring-buffer emptiness check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce050f307a ]
On A5XX GPUs when preemption is used it's invietable to enter a soft
lock-up state in which GPU is stuck at empty ring-buffer doing nothing.
This appears as full UI lockup and not detected as GPU hang (because
it's not). This happens due to not triggering preemption when it was
needed. Sometimes this state can be recovered by some new submit but
generally it won't happen because applications are waiting for old
submits to retire.
One of the reasons why this happens is a race between a5xx_submit and
a5xx_preempt_trigger called from IRQ during submit retire. Former thread
updates ring->cur of previously empty and not current ring right after
latter checks it for emptiness. Then both threads can just exit because
for first one preempt_state wasn't NONE yet and for second one all rings
appeared to be empty.
To prevent such situations from happening we need to establish guarantee
for preempt_trigger to make decision after each submit or retire. To
implement this we serialize preemption initiation using spinlock. If
switch is already in progress we need to re-trigger preemption when it
finishes.
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612045/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64fd6d01a5 ]
Two fields of preempt_record which are used by CP aren't reset on
resume: "data" and "info". This is the reason behind faults which happen
when we try to switch to the ring that was active last before suspend.
In addition those faults can't be recovered from because we use suspend
and resume to do so (keeping values of those fields again).
Fixes: b1fc2839d2 ("drm/msm: Implement preemption for A5XX targets")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/612043/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db9dec2db7 ]
Fine grain preemption (switching from/to points within submits)
requires extra handling in command stream of those submits, especially
when rendering with tiling (using GMEM). However this handling is
missing at this point in mesa (and always was). For this reason we get
random GPU faults and hangs if more than one priority level is used
because local preemption is enabled prior to executing command stream
from submit.
With that said it was ahead of time to enable local preemption by
default considering the fact that even on downstream kernel it is only
enabled if requested via UAPI.
Fixes: a7a4c19c36 ("drm/msm/a5xx: fix setting of the CP_PREEMPT_ENABLE_LOCAL register")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/612041/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e193669113 ]
In adreno_request_fw() when debugging information is printed to the log
after firmware load, an incorrect filename is printed. 'newname' is used
instead of 'fwname', so prefix "qcom/" is being added to filename.
Looks like "copy-paste" mistake.
Fix this mistake by replacing 'newname' with 'fwname'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2c41ef1b6f ("drm/msm/adreno: deal with linux-firmware fw paths")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/602382/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be03b30b7a ]
Use the state-aware spin_lock_irqsave() and spin_unlock_irqrestore()
to avoid unconditionally re-enabling the local interrupts.
Fixes: 411f5c1eac ("drm/mediatek: handle events when enabling/disabling crtc")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240828101511.3269822-1-fshao@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe828fbd87 ]
If the bridge is attached with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set,
this driver won't initialize a connector and hence display mode won't be
validated in drm_connector_helper_funcs::mode_valid(). So, move the mode
validation from drm_connector_helper_funcs::mode_valid() to
drm_bridge_funcs::mode_valid(), because the mode validation is always done
for the bridge.
Fixes: 30e2ae943c ("drm/bridge: Introduce LT8912B DSI to HDMI bridge")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813091637.1054586-1-victor.liu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fbaf475a5 ]
Several cs track offsets (such as 'track->db_s_read_offset')
either are initialized with or plainly take big enough values that,
once shifted 8 bits left, may be hit with integer overflow if the
resulting values end up going over u32 limit.
Same goes for a few instances of 'surf.layer_size * mslice'
multiplications that are added to 'offset' variable - they may
potentially overflow as well and need to be validated properly.
While some debug prints in this code section take possible overflow
issues into account, simply casting to (unsigned long) may be
erroneous in its own way, as depending on CPU architecture one is
liable to get different results.
Fix said problems by:
- casting 'offset' to fixed u64 data type instead of
ambiguous unsigned long.
- casting one of the operands in vulnerable to integer
overflow cases to u64.
- adjust format specifiers in debug prints to properly
represent 'offset' values.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 285484e2d5 ("drm/radeon: add support for evergreen/ni tiling informations v11")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5d024541e ]
EDID cannot be read on RK3328 until after read_hpd has been called and
correct io voltage has been configured based on connection status.
When a forced mode is used, e.g. video=1920x1080@60e, the connector
detect ops, that in turn normally calls the read_hpd, never gets called.
This result in reading EDID to fail in connector get_modes ops.
Call dw_hdmi_rk3328_read_hpd at end of dw_hdmi_rk3328_setup_hpd to
correct io voltage and allow reading EDID after setup_hpd.
Fixes: 1c53ba8f22 ("drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-5-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ef968d91a ]
There is no reason to limit VOP scaling to 3840px width, the limit of
RK3288, when there are newer VOP versions that support 4096px width.
Change to enforce a maximum of 4096px width plane scaling, the maximum
supported output width of the VOP versions supported by this driver.
Fixes: 4c156c21c7 ("drm/rockchip: vop: support plane scale")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240615170417.3134517-4-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17c6baff3d ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: c324acd503 ("drm/radeon/kms: parse the extended LCD info block")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c81c5bd5cf ]
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
It's worth mentioning that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/239
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 17c6baff3d ("drm/radeon: properly handle vbios fake edid sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8155566a26 ]
The comment in the vbios structure says:
// = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128
This fake edid struct has not been used in a long time, so I'm
not sure if there were actually any boards out there with a non-128 byte
EDID, but align the code with the comment.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lists.freedesktop.org/archives/amd-gfx/2024-June/109964.html
Fixes: d38ceaf99e ("drm/amdgpu: add core driver (v4)")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 320e2590e2 ]
One-element arrays are deprecated, and we are replacing them with
flexible array members instead. So, replace one-element array with
flexible-array member in struct _ATOM_FAKE_EDID_PATCH_RECORD and
refactor the rest of the code accordingly.
Important to mention is that doing a build before/after this patch
results in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/238
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Signed-off-by: Paulo Miguel Almeida <paulo.miguel.almeida.rodenas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 8155566a26 ("drm/amdgpu: properly handle vbios fake edid sizing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08ae395ea2 ]
This commit adds a null check for the set_output_gamma function pointer
in the dcn30_set_output_transfer_func function. Previously,
set_output_gamma was being checked for nullity at line 386, but then it
was being dereferenced without any nullity check at line 401. This
could potentially lead to a null pointer dereference error if
set_output_gamma is indeed null.
To fix this, we now ensure that set_output_gamma is not null before
dereferencing it. We do this by adding a nullity check for
set_output_gamma before the call to set_output_gamma at line 401. If
set_output_gamma is null, we log an error message and do not call the
function.
This fix prevents a potential null pointer dereference error.
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c:401 dcn30_set_output_transfer_func()
error: we previously assumed 'mpc->funcs->set_output_gamma' could be null (see line 386)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn30/dcn30_hwseq.c
373 bool dcn30_set_output_transfer_func(struct dc *dc,
374 struct pipe_ctx *pipe_ctx,
375 const struct dc_stream_state *stream)
376 {
377 int mpcc_id = pipe_ctx->plane_res.hubp->inst;
378 struct mpc *mpc = pipe_ctx->stream_res.opp->ctx->dc->res_pool->mpc;
379 const struct pwl_params *params = NULL;
380 bool ret = false;
381
382 /* program OGAM or 3DLUT only for the top pipe*/
383 if (pipe_ctx->top_pipe == NULL) {
384 /*program rmu shaper and 3dlut in MPC*/
385 ret = dcn30_set_mpc_shaper_3dlut(pipe_ctx, stream);
386 if (ret == false && mpc->funcs->set_output_gamma) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ If this is NULL
387 if (stream->out_transfer_func.type == TF_TYPE_HWPWL)
388 params = &stream->out_transfer_func.pwl;
389 else if (pipe_ctx->stream->out_transfer_func.type ==
390 TF_TYPE_DISTRIBUTED_POINTS &&
391 cm3_helper_translate_curve_to_hw_format(
392 &stream->out_transfer_func,
393 &mpc->blender_params, false))
394 params = &mpc->blender_params;
395 /* there are no ROM LUTs in OUTGAM */
396 if (stream->out_transfer_func.type == TF_TYPE_PREDEFINED)
397 BREAK_TO_DEBUGGER();
398 }
399 }
400
--> 401 mpc->funcs->set_output_gamma(mpc, mpcc_id, params);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Then it will crash
402 return ret;
403 }
Fixes: d99f13878d ("drm/amd/display: Add DCN3 HWSEQ")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 258905cb9a ]
We use komeda_crtc_normalize_zpos to normalize zpos of affected planes
to their blending zorder in CU. If there's only one slave plane in
affected planes and its layer_split property is enabled, order++ for
its split layer, so that when calculating the normalized_zpos
of master planes, the split layer of the slave plane is included, but
the max_slave_zorder does not include the split layer and keep zero
because there's only one slave plane in affacted planes, although we
actually use two slave layers in this commit.
In most cases, this bug does not result in a commit failure, but assume
the following situation:
slave_layer 0: zpos = 0, layer split enabled, normalized_zpos =
0;(use slave_layer 2 as its split layer)
master_layer 0: zpos = 2, layer_split enabled, normalized_zpos =
2;(use master_layer 2 as its split layer)
master_layer 1: zpos = 4, normalized_zpos = 4;
master_layer 3: zpos = 5, normalized_zpos = 5;
kcrtc_st->max_slave_zorder = 0;
When we use master_layer 3 as a input of CU in function
komeda_compiz_set_input and check it with function
komeda_component_check_input, the parameter idx is equal to
normailzed_zpos minus max_slave_zorder, the value of idx is 5
and is euqal to CU's max_active_inputs, so that
komeda_component_check_input returns a -EINVAL value.
To fix the bug described above, when calculating the max_slave_zorder
with the layer_split enabled, count the split layer in this calculation
directly.
Signed-off-by: hongchi.peng <hongchi.peng@siengine.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826024517.3739-1-hongchi.peng@siengine.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 624ab9cde2 ]
-ENODEV is used to signify that there is no zap shader for the platform,
and the CPU can directly take the GPU out of secure mode. We want to
use this return code when there is no zap-shader node. But not when
there is, but without a firmware-name property. This case we want to
treat as-if the needed fw is not found.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/604564/
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e794b7b9b9 upstream.
As it may return NULL pointer and cause NULL pointer dereference. Add check
for the return value of alloc_ordered_workqueue.
Cc: stable@vger.kernel.org
Fixes: 2f95bc6d32 ("drm: omapdrm: Perform initialization/cleanup at probe/remove time")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808061336.2796729-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fcd9e8afd5 ]
When debug_fence_init_onstack() is unused (CONFIG_DRM_I915_SELFTEST=n),
it prevents kernel builds with clang, `make W=1` and CONFIG_WERROR=y:
.../i915_sw_fence.c:97:20: error: unused function 'debug_fence_init_onstack' [-Werror,-Wunused-function]
97 | static inline void debug_fence_init_onstack(struct i915_sw_fence *fence)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Fix this by marking debug_fence_init_onstack() with __maybe_unused.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Fixes: 214707fc2c ("drm/i915/selftests: Wrap a timer into a i915_sw_fence")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829155950.1141978-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5bf472058f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
