[ Upstream commit 8932089b56 ]
The return value from qcom_snps_hsphy_suspend/resume is not used. Make
sure qcom_snps_hsphy_runtime_suspend/resume return this value as well.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-4-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a0eb8f9b9 ]
The driver is not enabling the ref clock, which thus gets disabled by
the clk_disable_unused() initcall. This leads to the dwc3 controller
failing to initialize if probed after clk_disable_unused() is called,
for instance when the driver is built as a module.
To fix this, switch to the clk_bulk API to handle both cfg_ahb and ref
clocks at the proper places.
Note that the cfg_ahb clock is currently not used by any device tree
instantiation of the PHY. Work needs to be done separately to fix this.
Link: https://lore.kernel.org/linux-arm-msm/ZEqvy+khHeTkC2hf@fedora/
Fixes: 51e8114f80 ("phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs")
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-3-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45d89a344e ]
In the dwc3 core, both system and runtime suspend end up calling
dwc3_suspend_common(). From there, what happens for the PHYs depends on
the USB mode and whether the controller is entering system or runtime
suspend.
HOST mode:
(1) system suspend on a non-wakeup-capable controller
The [1] if branch is taken. dwc3_core_exit() is called, which ends up
calling phy_power_off() and phy_exit(). Those two functions decrease the
PM runtime count at some point, so they will trigger the PHY runtime
sleep (assuming the count is right).
(2) runtime suspend / system suspend on a wakeup-capable controller
The [1] branch is not taken. dwc3_suspend_common() calls
phy_pm_runtime_put_sync(). Assuming the ref count is right, the PHY
runtime suspend op is called.
DEVICE mode:
dwc3_core_exit() is called on both runtime and system sleep
unless the controller is already runtime suspended.
OTG mode:
(1) system suspend : dwc3_core_exit() is called
(2) runtime suspend : do nothing
In host mode, the code seems to make a distinction between 1) runtime
sleep / system sleep for wakeup-capable controller, and 2) system sleep
for non-wakeup-capable controller, where phy_power_off() and phy_exit()
are only called for the latter. This suggests the PHY is not supposed to
be in a fully powered-off state for runtime sleep and system sleep for
wakeup-capable controller.
Moreover, downstream, cfg_ahb_clk only gets disabled for system suspend.
The clocks are disabled by phy->set_suspend() [2] which is only called
in the system sleep path through dwc3_core_exit() [3].
With that in mind, don't disable the clocks during the femto PHY runtime
suspend callback. The clocks will only be disabled during system suspend
for non-wakeup-capable controllers, through dwc3_core_exit().
[1] https://elixir.bootlin.com/linux/v6.4/source/drivers/usb/dwc3/core.c#L1988
[2] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/phy/phy-msm-snps-hs.c#L524
[3] https://git.codelinaro.org/clo/la/kernel/msm-5.4/-/blob/LV.AU.1.2.1.r2-05300-gen3meta.0/drivers/usb/dwc3/core.c#L1915
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20230629144542.14906-2-athierry@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a0eb8f9b9 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a881183dc ]
Update kerneldoc of struct qcom_snps_hsphy to fix:
drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c:135: warning: Function parameter or member 'update_seq_cfg' not described in 'qcom_snps_hsphy'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230507144818.193039-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a0eb8f9b9 ("phy: qcom-snps-femto-v2: properly enable ref clock")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e42f110700 upstream.
The init counter is not decremented on initialisation errors, which
prevents retrying initialisation.
Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.
Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230502103810.12061-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bf03a0cbd upstream.
The init counter is not decremented on initialisation errors, which
prevents retrying initialisation and can lead to the runtime suspend
callback attempting to disable resources that have never been enabled.
Add the missing decrement on initialisation errors so that the counter
reflects the state of the device.
Fixes: e78f3d15e1 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230502103810.12061-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7b98de745 upstream.
Drop the confused runtime-suspend type check which effectively broke
runtime PM if the DP child node happens to be parsed before the USB
child node during probe (e.g. due to order of child nodes in the
devicetree).
Instead use the new driver data USB PHY pointer to access the USB
configuration and resources.
Fixes: 52e013d0bf ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7a7d86d14d ]
The PHY is powered on during phy-init by setting the SW_PWRDN bit in the
COM_POWER_DOWN_CTRL register and then setting the same bit in the in the
PCS_POWER_DOWN_CONTROL register that belongs to the USB part of the
PHY.
Currently, whether power on succeeds depends on probe order and having
the USB part of the PHY be initialised first. In case the DP part of the
PHY is instead initialised first, the intended power on of the USB block
results in a corrupted DP_PHY register (e.g. DP_PHY_AUX_CFG8).
Add a pointer to the USB part of the PHY to the driver data and use that
to power on the PHY also if the DP part of the PHY is initialised first.
Fixes: 52e013d0bf ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Cc: stable@vger.kernel.org # 5.10
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-5-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 910dd4883d upstream.
The SC8180X has two resets but the DP configuration erroneously
described only one.
In case the DP part of the PHY is initialised before the USB part (e.g.
depending on probe order), then only the first reset would be asserted.
Fixes: 1633802cd4 ("phy: qcom: qmp: Add SC8180x USB/DP combo")
Cc: stable@vger.kernel.org # 5.15
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-4-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e965ab8216 upstream.
The SDM845 has two resets but the DP configuration erroneously described
only one.
In case the DP part of the PHY is initialised before the USB part (e.g.
depending on probe order), then only the first reset would be asserted.
Add a dedicated configuration for SDM845 rather than reuse the
incompatible SC7180 configuration.
Fixes: d88497fb6b ("phy: qualcomm: phy-qcom-qmp: add support for combo USB3+DP phy on SDM845")
Cc: stable@vger.kernel.org # 6.1
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8a5b59c5f upstream.
The SM8250 only uses three clocks but the DP configuration erroneously
described four clocks.
In case the DP part of the PHY is initialised before the USB part, this
would lead to uninitialised memory beyond the bulk-clocks array to be
treated as a clock pointer as the clocks are requested based on the USB
configuration.
Fixes: aff188feb5 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")
Cc: stable@vger.kernel.org # 5.13
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221114081346.5116-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 883aebf6e1 ]
sm8450_qmp_gen4x2_pcie_pcs_tbl[] contains the init sequence for PCS
registers of QMP PHY v5.20. So use the v5.20 specific register names.
Only major change is the rename of PCS_EQ_CONFIG{2/3} registers to
PCS_EQ_CONFIG{4/5}.
Fixes: 2c91bf6bf2 ("phy: qcom-qmp: Add SM8450 PCIe1 PHY support")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20221102081835.41892-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5682f13b7 ]
Add support for using PCIe1 (gen4x2) in EP mode on SM8450. The tables to
program are mostly common with the RC mode tables, so only register
difference are split into separate RC and EP tables.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-4-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 9ddcd920f8 ("phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11bf53a38c ]
The PCIe QMP PHY requires different programming sequences when being
used for the RC (Root Complex) or for the EP (End Point) modes. Allow
selecting the submode and thus selecting a set of PHY programming
tables.
Since the RC and EP modes share common some common init sequence, the
common sequence is kept in the main table and the sequence differences
are pushed to the extra tables.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 9ddcd920f8 ("phy: qcom-qmp-pcie: Fix high latency with 4x2 PHY when ASPM is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2584068a9e ]
Commit af6643242d ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018
pcie gen3") reworked the pcs regs values and removed the 0x400 offset
for each pcs_misc regs.
This change caused the malfunction of ipq8074 downstream since it still
has the legacy pcs table where pcs_misc are not placed on a different
table and instead put together assuming the offset of 0x400 for the
related pcs_misc regs.
Split pcs_misc init cfg from the ipq8074 pcs init table to be handled
correctly to prepare for actual support for gen3 pcie for ipq8074.
Fixes: af6643242d ("phy: qcom-qmp-pcie: split pcs_misc region for ipq6018 pcie gen3")
Reported-by: Robert Marko <robimarko@gmail.com>
Tested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20221103212125.17156-1-ansuelsmth@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2566ad8ec4 ]
SM8250 configuration tables are split into two parts: the common one and
the PHY-specific tables. Make this split more formal. Rather than having
a blind renamed copy of all QMP table fields, add separate struct
qmp_phy_cfg_tables and add two instances of this structure to the struct
qmp_phy_cfg. Later on this will be used to support different PHY modes
(RC vs EP).
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220927092207.161501-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 2584068a9e ("phy: qcom-qmp-pcie: split pcs_misc init cfg for ipq8074 pcs table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c6b3af390 ]
The PCS_USB register block lives at an offset of 0x1000 from the PCS
region on SC8280XP so add the missing offset to avoid corrupting
unrelated registers on runtime suspend.
Note that the current binding is broken as it does not describe the
PCS_USB region and the PCS register size does not cover PCS_USB and the
regions in between. As Linux currently maps full pages, simply adding
the offset to driver works until the binding has been fixed.
Fixes: c0c7769cda ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 922adfd59e ]
According to the kernel 4.4 sources from NHSS.QSDK.9.0.2 and according
to hardware docs, the PHY registers layout used for IPQ8074 USB3 PHY is
incorrect. This platform uses offset 0x174 for the PCS_STATUS register,
0xd8 for PCS_AUTONOMOUS_MODE_CTRL, etc.
Correct the PHY registers layout.
Fixes: 94a407cc17 ("phy: qcom-qmp: create copies of QMP PHY driver")
Fixes: 507156f5a9 ("phy: qcom-qmp: Add USB QMP PHY support for IPQ8074")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan T<quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20220929190017.529207-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b009db54 ]
Drop the start and pwrdn-ctrl abstractions which are no longer needed
since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-20-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59e ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5ef85adec ]
Clean up the PHY status polling by dropping the configuration mask which
is no longer needed since the QMP driver split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-13-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59e ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38cd167d1f ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-15-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59e ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 898ab85d6b ]
The SC8280XP PHY does not need a delay before starting the PHY (which is
what the has_pwrdn_delay config option really controls) so drop the
unnecessary delay.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59e ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 645d3d0470 ]
Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59e ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30518b1989 ]
The phy_status mask was never set for IPQ6018 which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.
Fixes: 520264db3b ("phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xx")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94b7288ead ]
The phy_status mask was never set for IPQ8074 (gen3) which meant that
the driver would not wait for the PHY to be initialised during power-on
and would never detect PHY initialisation timeouts.
Fixes: 334fad1854 ("phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9eac5ae2 ]
The phy_status mask was never set for SC8180X which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.
Fixes: f839f14e24 ("phy: qcom-qmp: Add sc8180x PCIe support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51bd33069f ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
But as the vendor kernel do have a 1 ms delay *after* starting the PHY
and before starting to poll the status it is possible that later
contributors have simply not noticed that the mainline power-down delay
is not equivalent.
As the current delay before even starting the PHY is pretty much
pointless and likely a mistake, move the delay after starting the PHY
which avoids a few iterations of polling and speeds up startup by 1 ms
(the poll loop otherwise takes about 1.8 ms).
Note that MSM8998 has never used a power-down delay so add a flag to
skip the delay in case starting the PHY is faster on MSM8998. This can
be removed after someone takes a measurement.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 4a9eac5ae2 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e71906144b ]
The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).
The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).
Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 4a9eac5ae2 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d93887cb4 ]
Since commit 0d58280cf1 ("phy: Update PHY power control sequence") the
PHY is powered on before configuring the registers and only the MSM8996
PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS
initialisation table, may possibly require a second update afterwards.
To make things worse, the POWER_DOWN_CONTROL register lies at a
different offset on more recent SoCs so that the second update, which
still used a hard-coded offset, would write to an unrelated register
(e.g. a revision-id register on SC8280XP).
As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop
the bogus register update.
Fixes: e4d8b05ad5 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #RB3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit fc64623637 ("phy: qcom-qmp-combo,usb: add support for separate
PCS_USB region") started treating the PCS_USB registers as potentially
separate from the PCS registers but used the wrong base when no PCS_USB
offset has been provided.
Fix the PCS_USB base used at runtime resume to prevent dereferencing a
NULL pointer on platforms that do not provide a PCS_USB offset (e.g.
SC7180).
Fixes: fc64623637 ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region")
Cc: stable@vger.kernel.org # 5.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20221026162116.26462-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On SDM845 one of PCIe PHYs (the QHP one) has the same region for TX and
RX registers. Since the commit 4be26f695f ("phy: qcom-qmp-pcie: fix
memleak on probe deferral") added checking that resources are not
allocated beforehand, this PHY can not be probed anymore. Fix this by
skipping the map of ->rx resource on the QHP PHY and assign it manually.
Fixes: 4be26f695f ("phy: qcom-qmp-pcie: fix memleak on probe deferral")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220926172514.880776-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220924070300.25080-5-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220924070300.25080-4-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220924070300.25080-3-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220924070300.25080-2-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Smatch reports the following error:
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_clk' from clk_prepare_enable() not released on lines:
58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->cal_sleep_clk' from clk_prepare_enable() not released on
lines: 58.
drivers/phy/qualcomm/phy-qcom-usb-hsic.c:82 qcom_usb_hsic_phy_power_on()
warn: 'uphy->phy_clk' from clk_prepare_enable() not released on lines:
58.
Fix this by calling proper clk_disable_unprepare calls.
Fixes: 0b56e9a7e8 ("phy: Group vendor specific phy drivers")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220914051334.69282-1-dzm91@hust.edu.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220922111228.36355-8-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220922111228.36355-7-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20220922111228.36355-4-yuancan@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the DP_COM control block flag from the configuration data, which is
set for all combo PHYs and hence no longer needed since the QMP driver
split.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-18-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For legacy reasons, there are two configuration parameters that appear
to describe the number of lanes a PHY has, even if "nlanes" was actually
used for a different purpose.
Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-17-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For legacy reasons, there are two configuration parameters that describe
the number of lanes a PHY has.
Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-16-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For legacy reasons, there are two configuration parameters that appear
to describe the number of lanes a PHY has, even if "nlanes" was actually
used for a different purpose.
Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-15-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The nlanes configuration parameter is really the number of PHYs provided
by this QMP block on MSM8996. Rename it accordingly.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For legacy reasons, there are two configuration parameters that describe
the number of lanes a PHY has.
Replace them both with a new field simply named "lanes".
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-13-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Only the MSM8996 PCIe QMP driver uses the index field so drop it from
the other drivers.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the unused mask_com_pcs_ready field from struct qmp_phy_cfg.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-11-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop the unused mode field from struct qmp_phy.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20220920073826.20811-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
