commit 5f9466b50c upstream.
The user_mem_abort() function acquires a page reference via
__kvm_faultin_pfn() early in its execution. However, the subsequent
checks for mismatched attributes between stage 1 and stage 2 mappings
would return an error code directly, bypassing the corresponding page
release.
Fix this by storing the error and releasing the unused page before
returning the error.
Fixes: 6d674e28f6 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Fixes: 2a8dfab266 ("KVM: arm64: Block cacheable PFNMAP mapping")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f620d66af3 upstream.
Commit 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fc "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com>
Cc: stable@vger.kernel.org # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <lance.yang@linux.dev>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 195a1b7d83 upstream.
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f434ec2200 upstream.
The 1GHz OPP is supported on speed grade "O" as well according to the
device datasheet [0], so fix the opp-supported-hw property to support
this speed grade for 1GHz OPP.
[0] https://www.ti.com/lit/gpn/am62p
Fixes: 76d855f058 ("arm64: dts: ti: k3-am62p: add opp frequencies")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c4e48afb6 upstream.
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
Reference Docs
TRM (AM62A) - https://www.ti.com/lit/ug/spruj16b/spruj16b.pdf
TRM (AM62D) - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Fixes: 5fc6b1b626 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250903062513.813925-2-p-bhagat@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a185198f upstream.
pm8010 is a camera specific PMIC, and may not be present on some
devices. These may instead use a dedicated vreg for this purpose (Dell
XPS 9345, Dell Inspiron..) or use USB webcam instead of a MIPI one
alltogether (Lenovo Thinbook 16, Lenovo Yoga..).
Disable pm8010 by default, let platforms that actually have one onboard
enable it instead.
Cc: stable@vger.kernel.org
Fixes: 2559e61e7e ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250701183625.1968246-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 316294bb66 upstream.
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
Cc: stable@vger.kernel.org
Fixes: 27ca1de07d ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-sdm845-slimbam-channels-v1-1-498f7d46b9ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f73c82c855 upstream.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-2-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99b78773c2 upstream.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 305410ffd1 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-1-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd2f74f8f3 ]
When using bpf_program__attach_kprobe_multi_opts on ARM64 to hook a BPF program
that contains the bpf_get_stackid function, the BPF program fails
to obtain the stack trace and returns -EFAULT.
This is because ftrace_partial_regs omits the configuration of the pstate register,
leaving pstate at the default value of 0. When get_perf_callchain executes,
it uses user_mode(regs) to determine whether it is in kernel mode.
This leads to a misjudgment that the code is in user mode,
so perf_callchain_kernel is not executed and the function returns directly.
As a result, trace->nr becomes 0, and finally -EFAULT is returned.
Therefore, the assignment of the pstate register is added here.
Fixes: b9b55c8912 ("tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs")
Closes: https://lore.kernel.org/bpf/20250919071902.554223-1-yangfeng59949@163.com/
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5973a62efa upstream.
Since the referenced fixes commit, the kernel's .text section is only
mapped starting from _stext; the region [_text, _stext) is omitted. As a
result, other vmalloc/vmap allocations may use the virtual addresses
nominally in the range [_text, _stext). This address reuse confuses
multiple things:
1. crash_prepare_elf64_headers() sets up a segment in /proc/vmcore
mapping the entire range [_text, _end) to
[__pa_symbol(_text), __pa_symbol(_end)). Reading an address in
[_text, _stext) from /proc/vmcore therefore gives the incorrect
result.
2. Tools doing symbolization (either by reading /proc/kallsyms or based
on the vmlinux ELF file) will incorrectly identify vmalloc/vmap
allocations in [_text, _stext) as kernel symbols.
In practice, both of these issues affect the drgn debugger.
Specifically, there were cases where the vmap IRQ stacks for some CPUs
were allocated in [_text, _stext). As a result, drgn could not get the
stack trace for a crash in an IRQ handler because the core dump
contained invalid data for the IRQ stack address. The stack addresses
were also symbolized as being in the _text symbol.
Fix this by bringing back the mapping of [_text, _stext), but now make
it non-executable and read-only. This prevents other allocations from
using it while still achieving the original goal of not mapping
unpredictable data as executable. Other than the changed protection,
this is effectively a revert of the fixes commit.
Fixes: e2a073dde9 ("arm64: omit [_text, _stext) from permanent kernel mapping")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27f94b7153 upstream.
2290 was found in the field to also require this quirk, as long &
high-bandwidth workloads (e.g. USB ethernet) are consistently able to
crash the controller otherwise.
The same change has been made for a number of SoCs in [1], but QCM2290
somehow escaped the list (even though the very closely related SM6115
was there).
Upon a controller crash, the log would read:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
Add snps,parkmode-disable-ss-quirk to the DWC3 instance in order to
prevent the aforementioned breakage.
[1] https://lore.kernel.org/all/20240704152848.3380602-1-quic_kriskura@quicinc.com/
Cc: stable@vger.kernel.org
Reported-by: Rob Clark <robin.clark@oss.qualcomm.com>
Fixes: a64a0192b7 ("arm64: dts: qcom: Add initial QCM2290 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708-topic-2290_usb-v1-1-661e70a63339@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6313115c55 ]
The alias is used by the boot loader to fill the MAC address.
Fixes: aaa1d42a4c ("arm64: dts: apple: Add J375 devicetrees")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c34e2ec6a8 ]
Add bluetooth PCIe device nodes to specify per device brcm,board-type
and provide the bootloader filled "local-bd-address" and calibration
data.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-3-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Stable-dep-of: 6313115c55 ("arm64: dts: apple: Add ethernet0 alias for J375 template")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3050713d84 ]
Add compatible and antenna-sku properties to the shared node and
brcm,board-type property to individuall board device trees.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-2-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Stable-dep-of: 6313115c55 ("arm64: dts: apple: Add ethernet0 alias for J375 template")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ff4a0fa3e ]
The current implementation seems incorrect and does NOT match the
comment above, use bpf_jit_binary_pack_finalize() instead.
Fixes: 1dad391dae ("bpf, arm64: use bpf_prog_pack for memory management")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250916232653.101004-1-hengqi.chen@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd1ce7ef6a ]
When the board was added, its external 32.768 KHz crystal was described
but not hooked up correctly. This meant the device had to fall back to
the SoC's internal oscillator or divide a 32 KHz clock from the main
oscillator, neither of which are accurate for the RTC. As a result the
RTC clock will drift badly.
Hook the crystal up to the RTC block and request the correct clock rate.
Fixes: de713ccb99 ("arm64: dts: allwinner: t527: Add OrangePi 4A board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d5e1ba00a ]
When the board was added, its external 32.768 KHz crystal was described
but not hooked up correctly. This meant the device had to fall back to
the SoC's internal oscillator or divide a 32 KHz clock from the main
oscillator, neither of which are accurate for the RTC. As a result the
RTC clock will drift badly.
Hook the crystal up to the RTC block and request the correct clock rate.
Fixes: dbe54efa32 ("arm64: dts: allwinner: a523: add Avaota-A1 router support")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f01e1e14e ]
The Radxa Cubie A5E has empty pads for a 32.768 KHz crystal, but it is
left unpopulated, as per the schematics and seen on board images. A dead
give away is the RTC's LOSC auto switch register showing the external
OSC to be abnormal.
Drop the external crystal from the device tree. It was not referenced
anyway.
Fixes: c2520cd032 ("arm64: dts: allwinner: a523: add Radxa A5E support")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4184f01907 ]
The Radxa Cubie A5E has a 3-color LED. The green and blue LEDs are wired
to GPIO pins on the SoC, and the green one is lit by default to serve as
a power indicator. The red LED is wired to the M.2 slot.
Add device nodes for the green and blue LEDs.
A default "heartbeat" trigger is set for the green power LED, though in
practice it might be better if it were inverted, i.e. lit most of the
time.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250812175927.2199219-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Stable-dep-of: 9f01e1e14e ("arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe6a5d1dd ]
This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.
Fixes: 9983822c8c ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-39-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a1e9c973 ]
All of the MT6360 regulator nodes were wrong and would not probe
because the regulator names are supposed to be lower case, but
they are upper case in this devicetree.
Change all nodes to be lower case to get working regulators.
Fixes: 94aaf79a6a ("arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3fff78c1 ]
The PCIe TPHY is under the soc bus, which provides MMIO, and all
nodes under that must use the bus, otherwise those would clearly
be out of place.
Add ranges to the PCIe tphy and assign the address to the main
node to silence a dtbs_check warning, and fix the children to
use the MMIO range of t-phy.
Fixes: 963c3b0c47 ("arm64: dts: mediatek: fix t-phy unit name")
Fixes: 918aed7abd ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-24-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236681fb64 ]
Change the latch-ck value from 0x14 to 4: as only bits [0-3] are
actually used, the final value that gets written to the register
field for DAT_LATCH_CK_SEL is just 0x4.
This also fixes dtbs_check warnings.
Fixes: 5a65dcccf4 ("arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250724083914.61351-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98967109c9 ]
The node names for "pmic", "regulators", "rtc", and "keys" are
dictated by the PMIC MFD binding: change those to adhere to it.
Fixes: aef783f3e0 ("arm64: dts: mediatek: Add MT6331 PMIC devicetree")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5df910b5 ]
Adding pin control node to the child won't parse the pins during driver
bind. Fix the issue by moving it to parent node.
This issue is observed while adding Schmitt input enable for PS0 pin on
later patch. Currently the reset value of the PIN is set to NMI function
and hence there is no breakage.
Fixes: 9e95446b0c ("arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250817145135.166591-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0370911565 ]
The touchscreen controller used with the original Krabby design is the
Elan eKTH6918, which is in the same family as eKTH6915, but supporting
a larger screen size with more sense lines.
OTOH, the touchscreen controller that actually shipped on the Tentacruel
devices is the Elan eKTH6A12NAY. A compatible string was added for it
specifically because it has different power sequencing timings.
Fix up the touchscreen nodes for both these. This also includes adding
a previously missing reset line. Also add "no-reset-on-power-off" since
the power is always on, and putting it in reset would consume more
power.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250812090135.3310374-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c881d1c37b ]
The efuse block in the MT8188 contains the GPU speed bin cell, and like
the MT8186 one, has the same conversion scheme to work with the GPU OPP
binding. This was reflected in a corresponding change to the efuse DT
binding.
Change the fallback compatible of the MT8188's efuse block from the
generic one to the MT8186 one. This also makes GPU DVFS work properly.
Fixes: d39aacd102 ("arm64: dts: mediatek: mt8188: add lvts definitions")
Fixes: 50e7592cb6 ("arm64: dts: mediatek: mt8188: Add GPU speed bin NVMEM cells")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250610063431.2955757-3-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 932424a925 ]
This reverts commit 1a314099b7.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP
cores is 16MB, so the DMA memory regions are chosen such that
they are in separate 16MB regions for each DSP, while reserving
a total of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 1a314099b7 ("arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-23-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a1778c78 ]
This reverts commit 9f3814a7c0.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP cores
is 16MB, so the DMA memory regions are chosen such that they are
in separate 16MB regions for each DSP, while reserving a total
of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 9f3814a7c0 ("arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-22-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aee0678597 ]
Currently, the reserved memory carveouts used by remote processors are
named like 'rproc-name-<dma>-memory-region@addr'. While it is
descriptive, the node label already serves that purpose. Rename reserved
memory nodes to generic 'memory@addr' to align with the device tree
specifications. This is done for all TI K3 based boards.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250908142826.1828676-14-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: 79a1778c78 ("Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c8fdc280 ]
The J742S2 SoC reuses the common k3-j784s4-j742s2-mcu-wakeup-common.dtsi
for its MCU domain, but it does not override the firmware-name property
for its R5F cores. This causes the wrong firmware binaries to be
referenced.
Introduce a new k3-j742s2-mcu-wakeup.dtsi file to override the
firmware-name property with correct names for J742s2.
Fixes: 38fd90a3e1 ("arm64: dts: ti: Introduce J742S2 SoC family")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20250823163111.2237199-1-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 843367c7ed ]
The RK3576 EVB1 has a RTL8211F PHY for each GMAC interface with
a dedicated reset line and the 25MHz clock provided by the SoC.
The current description results in non-working Ethernet as the
clocks are only enabled by the PHY driver, but probing the right
PHY driver currently requires that the PHY ID register can be read
for automatic identification.
This fixes up the network description to get the network functionality
working reliably and cleans up usage of deprecated DT properties while
at it.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250910-rk3576-evb-network-v1-1-68ed4df272a2@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf8183ad0 ]
Add device tree nodes to enable the onboard Ampak AP6275P WiFi chip
connected over a PCIe link on Rockchip RK3576 EVB1.
It takes an external 32 kHz clock from the RTC chip and requires the
WIFI_REG_ON signal to be enabled before the bus is enumerated to
initialize properly.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-2-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: 843367c7ed ("arm64: dts: rockchip: Fix network on rk3576 evb1 board")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc3f973b2 ]
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-9-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a15f095b59 ]
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: acca163f3f ("arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0aeb7ed4bc ]
A value of 10 is not valid for "mediatek,pull-down-adv" and
"mediatek,pull-up-adv" properties which have defined values of 0-3. It
appears the "10" was written as a binary value. The driver only looks at
the lowest 2 bits, so the value "10" decimal works out the same as if
"2" was used.
Fixes: cd894e274b ("arm64: dts: mt8183: Add krane-sku176 board")
Fixes: 19b6403f1e ("arm64: dts: mt8183: add mt8183 pumpkin board")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250722171152.58923-2-robh@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3374b5fb26 ]
When test suspend resume with 6.8 based kernel, system can't resume
and I got below error which can be also reproduced with 6.16 rc6+
kernel.
mtk-pcie-gen3 112f0000.pcie: PCIe link down, current LTSSM state: detect.quiet (0x0)
mtk-pcie-gen3 112f0000.pcie: PM: dpm_run_callback(): genpd_resume_noirq returns -110
mtk-pcie-gen3 112f0000.pcie: PM: failed to resume noirq: error -110
After investigation, looks pcie0 has the same problem as pcie1 as
decribed in commit 3d7fdd8e38 ("arm64: dts: mediatek: mt8195:
Remove suspend-breaking reset from pcie1").
Fixes: ecc0af6a3f ("arm64: dts: mt8195: Add pcie and pcie phy nodes")
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250721095959.57703-1-guoqing.jiang@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e08cdd604 ]
PCIe `port01` of t8103-j457 (iMac, M1, 2 USB-C ports, 2021) is unused
and disabled. Linux' PCI subsystem assigns the ethernet nic from
`port02` to bus 02. This results into assigning `pcie0_dart_1` from the
disabled port as iommu. The `pcie0_dart_1` instance is disabled and
probably fused off (it is on the M2 Pro Mac mini which has a disabled
PCIe port as well).
Without iommu the ethernet nic is not expected work.
Adjusts the "bus-range" and the PCIe devices "reg" property to PCI
subsystem's bus number.
Fixes: 7c77ab91b3 ("arm64: dts: apple: Add missing M1 (t8103) devices")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-1-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fdaf3b183 ]
According to the imx95 RM, the lpuart7 rx and tx DMA's srcid are 88 and 87,
and the lpuart8 rx and tx DMA's srcid are 90 and 89. So correct them.
Fixes: 915fd2e127 ("arm64: dts: imx95: add edma[1..3] nodes")
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94737568b ]
The assignment of the USB ports is wrong and needs to be swapped.
The OTG (USB-C) port is on the first port and the host port with
the onboard hub is on the second port.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Fixes: 2b52fd6035 ("arm64: dts: Add support for Kontron i.MX93 OSM-S SoM and BL carrier board")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d1e3aa282 ]
The Retronix R-Car V4H Sparrow Hawk EVTB1 uses 1V8 IO voltage supply
for VDDQ18_25_AVB power rail. Update the AVB0 pinmux to reflect the
change in IO voltage. Since the VDDQ18_25_AVB power rail is shared,
all four AVB0, AVB1, AVB2, TSN0 PFC/GPIO POC[7..4] registers have to
be configured the same way. As the EVTA1 boards are from a limited run
and generally not available, update the DT to make it compatible with
EVTB1 IO voltage settings.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250806192821.133302-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae95807b00 ]
Invert the polarity of microSD voltage selector on Retronix R-Car V4H
Sparrow Hawk board. The voltage selector was not populated on prototype
EVTA1 boards, and is implemented slightly different on EVTB1 boards. As
the EVTA1 boards are from a limited run and generally not available,
update the DT to make it compatible with EVTB1 microSD voltage selector.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250727235905.290427-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae014fbc99 ]
On RZ/G2LC SMARC EVK, CAN-FD channel0 is not populated, and currently we
are deleting a wrong and nonexistent node. Fixing the wrong node would
invoke a dtb warning message, as channel0 is a required property.
Disable CAN-FD channel0 instead of deleting the node.
Fixes: 46da632734 ("arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250801121959.267424-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
