commit 57c8e9da3d upstream.
All the other ref clocks provided by this driver have the bi_tcxo
as parent. The eDP refclk is the only one without a parent, leading
to reporting its rate as 0. So set its parent to bi_tcxo, just like
the rest of the refclks.
Cc: stable@vger.kernel.org # v6.9
Fixes: 06aff11619 ("clk: qcom: Add TCSR clock driver for x1e80100")
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250730-clk-qcom-tcsrcc-x1e80100-parent-edp-refclk-v1-1-7a36ef06e045@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49ef649110 ]
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1624dead9a ]
The conditional check for the PLL0 multiplier 'm' used a logical AND
instead of OR, making the range check ineffective. This patch replaces
&& with || to correctly reject invalid values of 'm' that are either
less than or equal to 0 or greater than LPC18XX_PLL0_MSEL_MAX.
This ensures proper bounds checking during clk rate setting and rounding.
Fixes: b04e0b8fd5 ("clk: add lpc18xx cgu clk driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
[sboyd@kernel.org: 'm' is unsigned so remove < condition]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46a3d323a ]
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Stable-dep-of: 1624dead9a ("clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e121370a7 ]
The `flags` in |struct mtk_mux| are core clk flags, not mux clk flags.
Passing one to the other is wrong.
Since there aren't any actual users adding CLK_MUX_* flags, just drop it
for now.
Fixes: b05ea33143 ("clk: mediatek: clk-mux: Add .determine_rate() callback")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c4c26b624 ]
The infrastructure gate for the HDMI specific crystal needs the
top_hdmi_xtal clock to be configured in order to ungate the 26m
clock to the HDMI IP, and it wouldn't work without.
Reparent the infra_ao_hdmi_26m clock to top_hdmi_xtal to fix that.
Fixes: e2edf59dec ("clk: mediatek: Add MT8195 infrastructure clock support")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc55fc58fc ]
In case of krealloc_array() failure, the current error handling just
returns from the function without freeing the original array.
Fix this memory leak by freeing the original array.
Fixes: 6aa1754764 ("clk: renesas: cpg-mssr: Ignore all clocks assigned to non-Linux system")
Signed-off-by: Yuan CHen <chenyuan@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250908012810.4767-1-chenyuan_fl@163.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47b13635da ]
determine_rate() is expected to return an error code, or 0 on success.
clk_sam9x5_peripheral_determine_rate() has a branch that returns the
parent rate on a certain case. This is the behavior of round_rate(),
so let's go ahead and fix this by setting req->rate.
Fixes: b4c115c761 ("clk: at91: clk-peripheral: add support for changeable parent rate")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9524f95c40 ]
Commit 9b47105f54 ("clk: qcom: dispcc-qcs615: Add QCS615 display clock
controller driver") adds the config QCS_DISPCC_615, which selects the
non-existing config QCM_GCC_615. Probably, this is just a three-letter
abbreviation mix-up here, though. There is a config named QCS_GCC_615,
and the related config QCS_CAMCC_615 selects that config.
Fix the typo and use the intended config name in the select command.
Fixes: 9b47105f54 ("clk: qcom: dispcc-qcs615: Add QCS615 display clock controller driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250902121754.277452-1-lukas.bulwahn@redhat.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c51a37ffea ]
The dpu0_pixelclk and dpu1_pixelclk gates were incorrectly parented to
the video_pll_clk.
According to the TH1520 TRM, the "dpu0_pixelclk" should be sourced from
"DPU0 PLL DIV CLK". In this driver, "DPU0 PLL DIV CLK" corresponds to
the `dpu0_clk` clock, which is a divider whose parent is the
`dpu0_pll_clk`.
This patch corrects the clock hierarchy by reparenting `dpu0_pixelclk`
to `dpu0_clk`. By symmetry, `dpu1_pixelclk` is also reparented to its
correct source, `dpu1_clk`.
Fixes: 50d4b157fa ("clk: thead: Add clock support for VO subsystem in T-HEAD TH1520 SoC")
Reported-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
[Icenowy: add Drew's R-b and rebased atop ccu_gate refactor]
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e99b992c8 ]
The padctrl0 clock seems to be a child of the perisys_apb4_hclk clock,
gating the later makes padctrl0 registers stuck too.
Fix this relationship.
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.dev>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaa75cbd5d ]
Similar to previous situation of mux clocks, the gate clocks of
clk-th1520-ap drivers are also using a helper that creates a temporary
struct clk_hw and abandons the struct clk_hw in struct ccu_common, which
prevents clock gates to be clock parents.
Do the similar refactor of dropping struct ccu_common and directly use
struct clk_gate here.
This patch mimics the refactor done on struct ccu_mux in 54edba916e
("clk: thead: th1520-ap: Describe mux clocks with clk_mux").
Fixes: ae81b69fd2 ("clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks")
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c123519bff ]
There are very rare randconfig builds that turn on this driver but
don't already select CONFIG_AUXILIARY_BUS from another driver, and
this results in a build failure:
arm-linux-gnueabi-ld: drivers/clk/clk-npcm8xx.o: in function `npcm8xx_clock_driver_init':
clk-npcm8xx.c:(.init.text+0x18): undefined reference to `__auxiliary_driver_register'
Select the bus here, as all other clk drivers using it do.
Fixes: e0b255df02 ("clk: npcm8xx: add clock controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250807072241.4190376-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation.
Fixes: 45717804b7 ("clk: sunxi-ng: mp: introduce dual-divider clock")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250830170901.1996227-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Genpd OF providers must now be registered after genpd bus registration.
However, cpg_mstp_add_clk_domain() is only called from CLK_OF_DECLARE(),
which is too early. Hence on R-Car M1A, R-Car H1, and RZ/A1, the
CPG/MSTP Clock Domain fails to register, and any devices residing in
that clock domain fail to probe.
Fix this by splitting initialization into two steps:
- The first part keeps on registering the PM domain with genpd at
CLK_OF_DECLARE(),
- The second and new part moves the registration of the genpd OF
provider to a postcore_initcall().
See also commit c5ae5a0c61 ("pmdomain: renesas: rcar-sysc: Add
genpd OF provider at postcore_initcall").
Fixes: 18a3a510ec ("pmdomain: core: Add the genpd->dev to the genpd provider bus")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/81ef5f8d5d31374b7852b05453c52d2f735062a2.1755073087.git.geert+renesas@glider.be
the diff is all the new Qualcomm clk drivers added for a few SoCs they're
working on. The other two vendors with significant work this cycle are Renesas
and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some
new SoCs while Amlogic is starting a significant refactoring to simplify their
code.
The core framework gained a pair of helpers to get the 'struct device' or
'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit
tests were added for these simple helpers as well. Beyond that core change
there are lots of little fixes throughout the clk drivers for the stuff we see
every day, wrong clk driver data that affects tree topology or supported
frequencies, etc. They're not found until the clks are actually used by some
consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the
Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis tools and
possibly real humans
- A lot of little fixes here and there to things like clk tree topology,
missing frequencies, flagging clks as critical, etc. The full details are in
the commits and sub-tree merge logs
-----BEGIN PGP SIGNATURE-----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=S+dB
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
Resolve conflicts with i.MX95 changes 88768d6f8c ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a44 ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.
* clk-fixes:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
clk: sunxi-ng: a523: Mark MBUS clock as critical
* clk-pm:
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
Documentation: PM: *_autosuspend() functions update last busy time
PM: runtime: Mark last busy stamp in pm_request_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend()
PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend()
PM: runtime: Document return values of suspend-related API functions
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
* clk-bindings: (30 commits)
dt-bindings: clock: convert lpc1850-cgu.txt to yaml format
dt-bindings: clock: Convert qca,ath79-pll to DT schema
dt-bindings: clock: Convert nuvoton,npcm750-clk to DT schema
dt-bindings: clock: Convert moxa,moxart-clock to DT schema
dt-bindings: clock: Convert microchip,pic32mzda-clk to DT schema
dt-bindings: clock: Convert maxim,max9485 to DT schema
dt-bindings: clock: Convert qcom,krait-cc to DT schema
dt-bindings: clock: qcom: Remove double colon from description
dt-bindings: clock: convert lpc1850-ccu.txt to yaml format
dt-bindings: clock: Convert alphascale,asm9260-clock-controller to DT schema
dt-bindings: clock: Convert marvell,armada-370-corediv-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-periph-clock to DT schema
dt-bindings: clock: Convert marvell,mvebu-core-clock to DT schema
dt-bindings: clock: Convert marvell,berlin2-clk to DT schema
dt-bindings: clock: Convert marvell,dove-divider-clock to DT schema
dt-bindings: clock: Convert marvell,armada-3700-tbg-clock to DT schema
dt-bindings: clock: Convert marvell-armada-370-gating-clock to DT schema
dt-bindings: clock: Convert marvell,armada-xp-cpu-clock to DT schema
dt-bindings: clock: Convert TI-NSPIRE clocks to DT schema
dt-bindings: clock: Convert lsi,axm5516-clks to DT schema
...
* clk-cleanup: (29 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: bcm: bcm2835: convert from round_rate() to determine_rate()
MAINTAINERS: Include clk.py under COMMON CLK FRAMEWORK entry
clk: ti: Simplify ti_find_clock_provider()
...
* clk-pwm:
clk: pwm: Make use of non-sleeping PWMs
clk: pwm: Don't reconfigure running PWM at probe time
clk: pwm: Convert to use pwm_apply_might_sleep()
clk: pwm: Let .get_duty_cycle() return the real duty cycle
* clk-hw-device:
clk: tests: add clk_hw_get_dev() and clk_hw_get_of_node() tests
clk: tests: Make clk_register_clk_parent_data_device_driver() common
clk: add a clk_hw helpers to get the clock device or device_node
* clk-xilinx:
clk: xilinx: vcu: Update vcu init/reset sequence
clk: xilinx: vcu: unregister pll_post only if registered correctly
* clk-adi:
clk: clk-axi-clkgen: fix coding style issues
clk: clk-axi-clkgen move to min/max()
clk: clk-axi-clkgen: detect axi_clkgen_limits at runtime
include: adi-axi-common: add new helper macros
include: linux: move adi-axi-common.h out of fpga
clk: clk-axi-clkgen: make sure to include mod_devicetable.h
clk: clk-axi-clkgen: fix fpfd_max frequency for zynq
Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs,
and new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly,
the SoC specific firmware on Tegra and Qualcomm get minor enhancements
and chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes.
-----BEGIN PGP SIGNATURE-----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=7T40
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate cpufreq
driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix MAINTAINERS
entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver (Prashant
Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT cpuidle
driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the device
suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in the
runtime PM framework and update its documentation (Sakari Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power capping
driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmh/wC4SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1O6MIAJtfclAleksv+PzbEyC+yk72zKinJg35
WJUk4Kz1yMOqAPazbpXRXt1tuxqyB3HWeixnTFyZbz+bbhZjYJ0lvpWGkdsFaS0i
NSbILSpHNGtOrP6s6hVKTBmLAdAzdWYWMQizlWgGrkhOiN5BnQzL7pAi2aGqu9KS
tGqnIg/3QwBAvnxijgpkm7qozOUMPJ9dzSvxMaFeB6JH7SNbTOODVFtsoD+mbJlH
YVMMWxih8b4MRJgAo4N2bL1Glp/Qnwg4ACawnQokt8Rknbtwku57QF9YwTbubr36
Ok7qbNnUSx0h9KtMQQNogLLkFreTJkbGknVWEwaWWhXNeW9l4cr6MWo=
=xVF9
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
Fix the `clk_round_rate` implementation for Versal platforms by calling
the Versal-specific divider calculation helper. The existing code used
the generic divider routine, which results in incorrect round rate.
Fixes: 7681f64e64 ("clk: clocking-wizard: calculate dividers fractional parts")
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20250625054114.28273-1-shubhrajyoti.datta@amd.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Return 0 instead of -EINVAL if function ccu_pll_recalc_rate() fails to
get correct rate entry. Follow .recalc_rate callback documentation
as mentioned in include/linux/clk-provider.h for error return value.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Fixes: 1b72c59db0 ("clk: spacemit: Add clock support for SpacemiT K1 SoC")
Reviewed-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/aIBzVClNQOBrjIFG@bhairav-test.ee.iitb.ac.in
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Reduce symbol visibility by converting tegra_clk_periph_ops to static.
Removed the extern declaration from clk.h as the symbol is now locally
scoped to clk-periph.c.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/bda59ad46afae6e7484edf8e2f7bf23ceafe51e9.1752046270.git.xiaopei01@kylinos.cn
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
./drivers/clk/tegra/clk-periph.c:59:5-9: WARNING:
Unsigned expression compared with zero: rate < 0
The unsigned long 'rate' variable caused:
- Incorrect handling of negative errors
- Compile warning: "Unsigned expression compared with zero"
Fix by changing to long type and adding req->rate cast.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/79c7f01e29876c612e90d6d0157fb1572ca8b3fb.1752046270.git.xiaopei01@kylinos.cn
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
This driver also implements both the determine_rate() and round_rate()
clk ops, and the round_rate() clk ops is deprecated. When both are
defined, clk_core_determine_round_nolock() from the clk core will only
use the determine_rate() clk ops, so let's remove the round_rate() clk
ops since it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-13-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-12-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-11-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-10-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-9-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-8-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-7-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-6-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
The change to call fixup_div->ops->determine_rate() instead of
fixup_div->ops->round_rate() was done by hand.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-5-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-4-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
The change to call busy->div_ops->determine_rate() instead of
busy->div_ops->round_rate() was done by hand.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-3-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-2-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver implements both the determine_rate() and round_rate() clk
ops, and the round_rate() clk ops is deprecated. When both are defined,
clk_core_determine_round_nolock() from the clk core will only use the
determine_rate() clk ops, so let's remove the round_rate() clk ops since
it's unused.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250710-clk-imx-round-rate-v1-1-5726f98e6d8d@redhat.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075401.3217179-1-sakari.ailus@linux.intel.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075400.3217126-1-sakari.ailus@linux.intel.com
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250703-clk-cocci-drop-round-rate-v1-1-3a8da898367e@redhat.com
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
