[ Upstream commit 35561bab76 ]
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa960b5976 ]
Define the interrupt in the GICv2 for vGIC so KVM
can be used, it was missed from the original upstream
DTB for some reason.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Andrea della Porta <andrea.porta@suse.com>
Cc: Phil Elwell <phil@raspberrypi.com>
Fixes: faa3381267 ("arm64: dts: broadcom: Add minimal support for Raspberry Pi 5")
Link: https://lore.kernel.org/r/20250924085612.1039247-1-pbrobinson@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278b6cabf1 ]
Add missing address-cells 0 to GIC interrupt node to silence W=1
warning:
bcm2712.dtsi:494.4-497.31: Warning (interrupt_map): /axi/pcie@1000110000:interrupt-map:
Missing property '#address-cells' in node /soc@107c000000/interrupt-controller@7fff9000, using 0 as fallback
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250822133407.312505-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Stable-dep-of: aa960b5976 ("arm64: dts: broadcom: bcm2712: Define VGIC interrupt")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b98c94eed4 upstream.
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: stable@vger.kernel.org # 6.12.x
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 143937ca51 ]
Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03c ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d4ebc849 ]
The `ID_AA64MMFR4_EL1.EIESB` field, is an unsigned enumeration, but was
incorrectly defined as a `SignedEnum` when introduced in commit
cfc680bb04 ("arm64: sysreg: Add layout for ID_AA64MMFR4_EL1"). This is
corrected to `UnsignedEnum`.
Conversely, the `ID_AA64DFR0_EL1.DoubleLock` field, is a signed
enumeration, but was incorrectly defined as an `UnsignedEnum`. This is
corrected to `SignedEnum`, which wasn't correctly set when annotated as
such in commit ad16d4cf0b ("arm64/sysreg: Initial unsigned annotations
for ID registers").
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c33aa1804 upstream.
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bbf004c48 upstream.
Add cputype definitions for Neoverse-V3AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Neoverse-V3AE TRM:
https://developer.arm.com/documentation/SDEN-2615521/9-0/
... in section A.6.1 ("MIDR_EL1, Main ID Register").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea0d55ae4b upstream.
We intend that EL0 exception handlers unmask all DAIF exceptions
before calling exit_to_user_mode().
When completing single-step of a suspended breakpoint, we do not call
local_daif_restore(DAIF_PROCCTX) before calling exit_to_user_mode(),
leaving all DAIF exceptions masked.
When pseudo-NMIs are not in use this is benign.
When pseudo-NMIs are in use, this is unsound. At this point interrupts
are masked by both DAIF.IF and PMR_EL1, and subsequent irq flag
manipulation may not work correctly. For example, a subsequent
local_irq_enable() within exit_to_user_mode_loop() will only unmask
interrupts via PMR_EL1 (leaving those masked via DAIF.IF), and
anything depending on interrupts being unmasked (e.g. delivery of
signals) will not work correctly.
This was detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING.
Move the call to `try_step_suspended_breakpoints()` outside of the check
so that interrupts can be unmasked even if we don't call the step handler.
Fixes: 0ac7584c08 ("arm64: debug: split single stepping exception entry")
Cc: <stable@vger.kernel.org> # 6.17
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
[catalin.marinas@arm.com: added Mark's rewritten commit log and some whitespace]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ada.coupriediaz@arm.com: Fix conflict for v6.17 stable]
Signed-off-by: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0aa1b76fe1 upstream.
Another day, another syzkaller bug. KVM erroneously allows userspace to
pend vCPU events for a vCPU that hasn't been initialized yet, leading to
KVM interpreting a bunch of uninitialized garbage for routing /
injecting the exception.
In one case the injection code and the hyp disagree on whether the vCPU
has a 32bit EL1 and put the vCPU into an illegal mode for AArch64,
tripping the BUG() in exception_target_el() during the next injection:
kernel BUG at arch/arm64/kvm/inject_fault.c:40!
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
CPU: 3 UID: 0 PID: 318 Comm: repro Not tainted 6.17.0-rc4-00104-g10fd0285305d #6 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 21402009 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : exception_target_el+0x88/0x8c
lr : pend_serror_exception+0x18/0x13c
sp : ffff800082f03a10
x29: ffff800082f03a10 x28: ffff0000cb132280 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c2a99c20 x24: 0000000000000000
x23: 0000000000008000 x22: 0000000000000002 x21: 0000000000000004
x20: 0000000000008000 x19: ffff0000c2a99c20 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 00000000200000c0
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff800082f03af8 x7 : 0000000000000000 x6 : 0000000000000000
x5 : ffff800080f621f0 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 000000000040009b x1 : 0000000000000003 x0 : ffff0000c2a99c20
Call trace:
exception_target_el+0x88/0x8c (P)
kvm_inject_serror_esr+0x40/0x3b4
__kvm_arm_vcpu_set_events+0xf0/0x100
kvm_arch_vcpu_ioctl+0x180/0x9d4
kvm_vcpu_ioctl+0x60c/0x9f4
__arm64_sys_ioctl+0xac/0x104
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x34/0xf0
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: f946bc01 b4fffe61 9101e020 17fffff2 (d4210000)
Reject the ioctls outright as no sane VMM would call these before
KVM_ARM_VCPU_INIT anyway. Even if it did the exception would've been
thrown away by the eventual reset of the vCPU's state.
Cc: stable@vger.kernel.org # 6.17
Fixes: b7b27facc7 ("arm/arm64: KVM: Add KVM_GET/SET_VCPU_EVENTS")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9ad390a48 upstream.
The GIC CDEOI system instruction requires the Rt field to be set to 0b11111
otherwise the instruction behaviour becomes CONSTRAINED UNPREDICTABLE.
Currenly, its usage is encoded as a system register write, with a constant
0 value:
write_sysreg_s(0, GICV5_OP_GIC_CDEOI)
While compiling with GCC, the 0 constant value, through these asm
constraints and modifiers ('x' modifier and 'Z' constraint combo):
asm volatile(__msr_s(r, "%x0") : : "rZ" (__val));
forces the compiler to issue the XZR register for the MSR operation (ie
that corresponds to Rt == 0b11111) issuing the right instruction encoding.
Unfortunately LLVM does not yet understand that modifier/constraint
combo so it ends up issuing a different register from XZR for the MSR
source, which in turns means that it encodes the GIC CDEOI instruction
wrongly and the instruction behaviour becomes CONSTRAINED UNPREDICTABLE
that we must prevent.
Add a conditional to write_sysreg_s() macro that detects whether it
is passed a constant 0 value and issues an MSR write with XZR as source
register - explicitly doing what the asm modifier/constraint is meant to
achieve through constraints/modifiers, fixing the LLVM compilation issue.
Fixes: 7ec80fb3f0 ("irqchip/gic-v5: Add GICv5 PPI support")
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Cc: Sascha Bischoff <sascha.bischoff@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f9466b50c upstream.
The user_mem_abort() function acquires a page reference via
__kvm_faultin_pfn() early in its execution. However, the subsequent
checks for mismatched attributes between stage 1 and stage 2 mappings
would return an error code directly, bypassing the corresponding page
release.
Fix this by storing the error and releasing the unused page before
returning the error.
Fixes: 6d674e28f6 ("KVM: arm/arm64: Properly handle faulting of device mappings")
Fixes: 2a8dfab266 ("KVM: arm64: Block cacheable PFNMAP mapping")
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f620d66af3 upstream.
Commit 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the
zero page") attempted to fix ptrace() reading of tags from the zero page
by marking it as PG_mte_tagged during cpu_enable_mte(). The same commit
also changed the ptrace() tag access permission check to the VM_MTE vma
flag while turning the page flag test into a WARN_ON_ONCE().
Attempting to set the PG_mte_tagged flag early with
CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled may either hang (after commit
d77e59a8fc "arm64: mte: Lock a page for MTE tag initialisation") or
have the flags cleared later during page_alloc_init_late(). In addition,
pages_identical() -> memcmp_pages() will reject any comparison with the
zero page as it is marked as tagged.
Partially revert the above commit to avoid setting PG_mte_tagged on the
zero page. Update the __access_remote_tags() warning on untagged pages
to ignore the zero page since it is known to have the tags initialised.
Note that all user mapping of the zero page are marked as pte_special().
The arm64 set_pte_at() will not call mte_sync_tags() on such pages, so
PG_mte_tagged will remain cleared.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Fixes: 68d54ceeec ("arm64: mte: Allow PTRACE_PEEKMTETAGS access to the zero page")
Reported-by: Gergely Kovacs <Gergely.Kovacs2@arm.com>
Cc: stable@vger.kernel.org # 5.10.x
Cc: Will Deacon <will@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <lance.yang@linux.dev>
Acked-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 195a1b7d83 upstream.
The kprobe page is allocated by execmem allocator with ROX permission.
It needs to call set_memory_rox() to set proper permission for the
direct map too. It was missed.
Fixes: 10d5e97c1b ("arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f434ec2200 upstream.
The 1GHz OPP is supported on speed grade "O" as well according to the
device datasheet [0], so fix the opp-supported-hw property to support
this speed grade for 1GHz OPP.
[0] https://www.ti.com/lit/gpn/am62p
Fixes: 76d855f058 ("arm64: dts: ti: k3-am62p: add opp frequencies")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c4e48afb6 upstream.
The main pad configuration register region starts with the register
MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG0 with address 0x000f4000 and ends
with the MAIN_PADCFG_CTRL_MMR_CFG0_PADCONFIG150 register with address
0x000f4258, as a result of which, total size of the region is 0x25c
instead of 0x2ac.
Reference Docs
TRM (AM62A) - https://www.ti.com/lit/ug/spruj16b/spruj16b.pdf
TRM (AM62D) - https://www.ti.com/lit/ug/sprujd4/sprujd4.pdf
Fixes: 5fc6b1b626 ("arm64: dts: ti: Introduce AM62A7 family of SoCs")
Cc: stable@vger.kernel.org
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20250903062513.813925-2-p-bhagat@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9a185198f upstream.
pm8010 is a camera specific PMIC, and may not be present on some
devices. These may instead use a dedicated vreg for this purpose (Dell
XPS 9345, Dell Inspiron..) or use USB webcam instead of a MIPI one
alltogether (Lenovo Thinbook 16, Lenovo Yoga..).
Disable pm8010 by default, let platforms that actually have one onboard
enable it instead.
Cc: stable@vger.kernel.org
Fixes: 2559e61e7e ("arm64: dts: qcom: x1e80100-pmics: Add the missing PMICs")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Link: https://lore.kernel.org/r/20250701183625.1968246-2-alex.vinarskis@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 316294bb66 upstream.
Reading the hardware registers of the &slimbam on RB3 reveals that the BAM
supports only 23 pipes (channels) and supports 4 EEs instead of 2. This
hasn't caused problems so far since nothing is using the extra channels,
but attempting to use them would lead to crashes.
The bam_dma driver might warn in the future if the num-channels in the DT
are wrong, so correct the properties in the DT to avoid future regressions.
Cc: stable@vger.kernel.org
Fixes: 27ca1de07d ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250821-sdm845-slimbam-channels-v1-1-498f7d46b9ee@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f73c82c855 upstream.
On most MSM8939 devices, the bootloader already initializes the display to
show the boot splash screen. In this situation, MDSS is already configured
and left running when starting Linux. To avoid side effects from the
bootloader configuration, the MDSS reset can be specified in the device
tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8939.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 61550c6c15 ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-2-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99b78773c2 upstream.
On most MSM8916 devices (aside from the DragonBoard 410c), the bootloader
already initializes the display to show the boot splash screen. In this
situation, MDSS is already configured and left running when starting Linux.
To avoid side effects from the bootloader configuration, the MDSS reset can
be specified in the device tree to start again with a clean hardware state.
The reset for MDSS is currently missing in msm8916.dtsi, which causes
errors when the MDSS driver tries to re-initialize the registers:
dsi_err_worker: status=6
dsi_err_worker: status=6
dsi_err_worker: status=6
...
It turns out that we have always indirectly worked around this by building
the MDSS driver as a module. Before v6.17, the power domain was temporarily
turned off until the module was loaded, long enough to clear the register
contents. In v6.17, power domains are not turned off during boot until
sync_state() happens, so this is no longer working. Even before v6.17 this
resulted in broken behavior, but notably only when the MDSS driver was
built-in instead of a module.
Cc: stable@vger.kernel.org
Fixes: 305410ffd1 ("arm64: dts: msm8916: Add display support")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250915-msm8916-resets-v1-1-a5c705df0c45@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd2f74f8f3 ]
When using bpf_program__attach_kprobe_multi_opts on ARM64 to hook a BPF program
that contains the bpf_get_stackid function, the BPF program fails
to obtain the stack trace and returns -EFAULT.
This is because ftrace_partial_regs omits the configuration of the pstate register,
leaving pstate at the default value of 0. When get_perf_callchain executes,
it uses user_mode(regs) to determine whether it is in kernel mode.
This leads to a misjudgment that the code is in user mode,
so perf_callchain_kernel is not executed and the function returns directly.
As a result, trace->nr becomes 0, and finally -EFAULT is returned.
Therefore, the assignment of the pstate register is added here.
Fixes: b9b55c8912 ("tracing: Add ftrace_partial_regs() for converting ftrace_regs to pt_regs")
Closes: https://lore.kernel.org/bpf/20250919071902.554223-1-yangfeng59949@163.com/
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5973a62efa upstream.
Since the referenced fixes commit, the kernel's .text section is only
mapped starting from _stext; the region [_text, _stext) is omitted. As a
result, other vmalloc/vmap allocations may use the virtual addresses
nominally in the range [_text, _stext). This address reuse confuses
multiple things:
1. crash_prepare_elf64_headers() sets up a segment in /proc/vmcore
mapping the entire range [_text, _end) to
[__pa_symbol(_text), __pa_symbol(_end)). Reading an address in
[_text, _stext) from /proc/vmcore therefore gives the incorrect
result.
2. Tools doing symbolization (either by reading /proc/kallsyms or based
on the vmlinux ELF file) will incorrectly identify vmalloc/vmap
allocations in [_text, _stext) as kernel symbols.
In practice, both of these issues affect the drgn debugger.
Specifically, there were cases where the vmap IRQ stacks for some CPUs
were allocated in [_text, _stext). As a result, drgn could not get the
stack trace for a crash in an IRQ handler because the core dump
contained invalid data for the IRQ stack address. The stack addresses
were also symbolized as being in the _text symbol.
Fix this by bringing back the mapping of [_text, _stext), but now make
it non-executable and read-only. This prevents other allocations from
using it while still achieving the original goal of not mapping
unpredictable data as executable. Other than the changed protection,
this is effectively a revert of the fixes commit.
Fixes: e2a073dde9 ("arm64: omit [_text, _stext) from permanent kernel mapping")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27f94b7153 upstream.
2290 was found in the field to also require this quirk, as long &
high-bandwidth workloads (e.g. USB ethernet) are consistently able to
crash the controller otherwise.
The same change has been made for a number of SoCs in [1], but QCM2290
somehow escaped the list (even though the very closely related SM6115
was there).
Upon a controller crash, the log would read:
xhci-hcd.12.auto: xHCI host not responding to stop endpoint command
xhci-hcd.12.auto: xHCI host controller not responding, assume dead
xhci-hcd.12.auto: HC died; cleaning up
Add snps,parkmode-disable-ss-quirk to the DWC3 instance in order to
prevent the aforementioned breakage.
[1] https://lore.kernel.org/all/20240704152848.3380602-1-quic_kriskura@quicinc.com/
Cc: stable@vger.kernel.org
Reported-by: Rob Clark <robin.clark@oss.qualcomm.com>
Fixes: a64a0192b7 ("arm64: dts: qcom: Add initial QCM2290 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250708-topic-2290_usb-v1-1-661e70a63339@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6313115c55 ]
The alias is used by the boot loader to fill the MAC address.
Fixes: aaa1d42a4c ("arm64: dts: apple: Add J375 devicetrees")
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c34e2ec6a8 ]
Add bluetooth PCIe device nodes to specify per device brcm,board-type
and provide the bootloader filled "local-bd-address" and calibration
data.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-3-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Stable-dep-of: 6313115c55 ("arm64: dts: apple: Add ethernet0 alias for J375 template")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3050713d84 ]
Add compatible and antenna-sku properties to the shared node and
brcm,board-type property to individuall board device trees.
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20250823-apple-dt-sync-6-17-v2-2-6dc0daeb4786@jannau.net
Signed-off-by: Sven Peter <sven@kernel.org>
Stable-dep-of: 6313115c55 ("arm64: dts: apple: Add ethernet0 alias for J375 template")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ff4a0fa3e ]
The current implementation seems incorrect and does NOT match the
comment above, use bpf_jit_binary_pack_finalize() instead.
Fixes: 1dad391dae ("bpf, arm64: use bpf_prog_pack for memory management")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20250916232653.101004-1-hengqi.chen@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd1ce7ef6a ]
When the board was added, its external 32.768 KHz crystal was described
but not hooked up correctly. This meant the device had to fall back to
the SoC's internal oscillator or divide a 32 KHz clock from the main
oscillator, neither of which are accurate for the RTC. As a result the
RTC clock will drift badly.
Hook the crystal up to the RTC block and request the correct clock rate.
Fixes: de713ccb99 ("arm64: dts: allwinner: t527: Add OrangePi 4A board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d5e1ba00a ]
When the board was added, its external 32.768 KHz crystal was described
but not hooked up correctly. This meant the device had to fall back to
the SoC's internal oscillator or divide a 32 KHz clock from the main
oscillator, neither of which are accurate for the RTC. As a result the
RTC clock will drift badly.
Hook the crystal up to the RTC block and request the correct clock rate.
Fixes: dbe54efa32 ("arm64: dts: allwinner: a523: add Avaota-A1 router support")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f01e1e14e ]
The Radxa Cubie A5E has empty pads for a 32.768 KHz crystal, but it is
left unpopulated, as per the schematics and seen on board images. A dead
give away is the RTC's LOSC auto switch register showing the external
OSC to be abnormal.
Drop the external crystal from the device tree. It was not referenced
anyway.
Fixes: c2520cd032 ("arm64: dts: allwinner: a523: add Radxa A5E support")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250913102450.3935943-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4184f01907 ]
The Radxa Cubie A5E has a 3-color LED. The green and blue LEDs are wired
to GPIO pins on the SoC, and the green one is lit by default to serve as
a power indicator. The red LED is wired to the M.2 slot.
Add device nodes for the green and blue LEDs.
A default "heartbeat" trigger is set for the green power LED, though in
practice it might be better if it were inverted, i.e. lit most of the
time.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250812175927.2199219-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Stable-dep-of: 9f01e1e14e ("arm64: dts: allwinner: a527: cubie-a5e: Drop external 32.768 KHz crystal")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffe6a5d1dd ]
This devicetree contained only the SoC compatible but lacked the
machine specific one: add a "mediatek,mt8516-pumpkin" compatible
to the list to fix dtbs_check warnings.
Fixes: 9983822c8c ("arm64: dts: mediatek: add pumpkin board dts")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-39-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09a1e9c973 ]
All of the MT6360 regulator nodes were wrong and would not probe
because the regulator names are supposed to be lower case, but
they are upper case in this devicetree.
Change all nodes to be lower case to get working regulators.
Fixes: 94aaf79a6a ("arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-38-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3fff78c1 ]
The PCIe TPHY is under the soc bus, which provides MMIO, and all
nodes under that must use the bus, otherwise those would clearly
be out of place.
Add ranges to the PCIe tphy and assign the address to the main
node to silence a dtbs_check warning, and fix the children to
use the MMIO range of t-phy.
Fixes: 963c3b0c47 ("arm64: dts: mediatek: fix t-phy unit name")
Fixes: 918aed7abd ("arm64: dts: mt7986: add pcie related device nodes")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-24-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 236681fb64 ]
Change the latch-ck value from 0x14 to 4: as only bits [0-3] are
actually used, the final value that gets written to the register
field for DAT_LATCH_CK_SEL is just 0x4.
This also fixes dtbs_check warnings.
Fixes: 5a65dcccf4 ("arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250724083914.61351-21-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98967109c9 ]
The node names for "pmic", "regulators", "rtc", and "keys" are
dictated by the PMIC MFD binding: change those to adhere to it.
Fixes: aef783f3e0 ("arm64: dts: mediatek: Add MT6331 PMIC devicetree")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5df910b5 ]
Adding pin control node to the child won't parse the pins during driver
bind. Fix the issue by moving it to parent node.
This issue is observed while adding Schmitt input enable for PS0 pin on
later patch. Currently the reset value of the PIN is set to NMI function
and hence there is no breakage.
Fixes: 9e95446b0c ("arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250817145135.166591-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0370911565 ]
The touchscreen controller used with the original Krabby design is the
Elan eKTH6918, which is in the same family as eKTH6915, but supporting
a larger screen size with more sense lines.
OTOH, the touchscreen controller that actually shipped on the Tentacruel
devices is the Elan eKTH6A12NAY. A compatible string was added for it
specifically because it has different power sequencing timings.
Fix up the touchscreen nodes for both these. This also includes adding
a previously missing reset line. Also add "no-reset-on-power-off" since
the power is always on, and putting it in reset would consume more
power.
Fixes: 8855d01fb8 ("arm64: dts: mediatek: Add MT8186 Krabby platform based Tentacruel / Tentacool")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250812090135.3310374-1-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c881d1c37b ]
The efuse block in the MT8188 contains the GPU speed bin cell, and like
the MT8186 one, has the same conversion scheme to work with the GPU OPP
binding. This was reflected in a corresponding change to the efuse DT
binding.
Change the fallback compatible of the MT8188's efuse block from the
generic one to the MT8186 one. This also makes GPU DVFS work properly.
Fixes: d39aacd102 ("arm64: dts: mediatek: mt8188: add lvts definitions")
Fixes: 50e7592cb6 ("arm64: dts: mediatek: mt8188: Add GPU speed bin NVMEM cells")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250610063431.2955757-3-wenst@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 932424a925 ]
This reverts commit 1a314099b7.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP
cores is 16MB, so the DMA memory regions are chosen such that
they are in separate 16MB regions for each DSP, while reserving
a total of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 1a314099b7 ("arm64: dts: ti: k3-j721e-beagleboneai64: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-23-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79a1778c78 ]
This reverts commit 9f3814a7c0.
The C6x carveouts are reversed intentionally. This is due to the
requirement to keep the DMA memory region as non-cached, however the
minimum granular cache region for C6x is 16MB. So, C66x_0 marks the
entire C66x_1 16MB memory carveouts as non-cached, and uses the DMA
memory region of C66x_1 as its own, and vice-versa.
This was also called out in the original commit which introduced these
reversed carveouts:
"The minimum granularity on the Cache settings on C66x DSP cores
is 16MB, so the DMA memory regions are chosen such that they are
in separate 16MB regions for each DSP, while reserving a total
of 16 MB for each DSP and not changing the overall DSP
remoteproc carveouts."
Fixes: 9f3814a7c0 ("arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20250908142826.1828676-22-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aee0678597 ]
Currently, the reserved memory carveouts used by remote processors are
named like 'rproc-name-<dma>-memory-region@addr'. While it is
descriptive, the node label already serves that purpose. Rename reserved
memory nodes to generic 'memory@addr' to align with the device tree
specifications. This is done for all TI K3 based boards.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250908142826.1828676-14-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Stable-dep-of: 79a1778c78 ("Revert "arm64: dts: ti: k3-j721e-sk: Fix reversed C6x carveout locations"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00c8fdc280 ]
The J742S2 SoC reuses the common k3-j784s4-j742s2-mcu-wakeup-common.dtsi
for its MCU domain, but it does not override the firmware-name property
for its R5F cores. This causes the wrong firmware binaries to be
referenced.
Introduce a new k3-j742s2-mcu-wakeup.dtsi file to override the
firmware-name property with correct names for J742s2.
Fixes: 38fd90a3e1 ("arm64: dts: ti: Introduce J742S2 SoC family")
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://patch.msgid.link/20250823163111.2237199-1-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 843367c7ed ]
The RK3576 EVB1 has a RTL8211F PHY for each GMAC interface with
a dedicated reset line and the 25MHz clock provided by the SoC.
The current description results in non-working Ethernet as the
clocks are only enabled by the PHY driver, but probing the right
PHY driver currently requires that the PHY ID register can be read
for automatic identification.
This fixes up the network description to get the network functionality
working reliably and cleans up usage of deprecated DT properties while
at it.
Fixes: f135a1a073 ("arm64: dts: rockchip: Add rk3576 evb1 board")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250910-rk3576-evb-network-v1-1-68ed4df272a2@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf8183ad0 ]
Add device tree nodes to enable the onboard Ampak AP6275P WiFi chip
connected over a PCIe link on Rockchip RK3576 EVB1.
It takes an external 32 kHz clock from the RTC chip and requires the
WIFI_REG_ON signal to be enabled before the bus is enumerated to
initialize properly.
Tested-by: Pavel Zhovner <pavel@flipperdevices.com>
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250813-evb1-rtcwifibt-v1-2-d13c83422971@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Stable-dep-of: 843367c7ed ("arm64: dts: rockchip: Fix network on rk3576 evb1 board")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dc3f973b2 ]
The external Ethernet PHY has a reset pin that is connected to the SoC.
It is missing from the original submission.
Add it to complete the description.
Fixes: c6800f1599 ("arm64: dts: allwinner: t527: add EMAC0 to Avaota-A1 board")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250908181059.1785605-9-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>