[ Upstream commit 58fbf08935 ]
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58a17b2647 ]
In NXP i.MX6QP and i.MX7D SoCs, LTSSM registers are not accessible once
PME_Turn_Off message is broadcasted to the link. So there is no way to
verify whether the link has entered L2/L3 Ready state or not.
Hence, add a new flag 'dw_pcie_rp::skip_l23_ready' and set it to 'true' for
the above mentioned SoCs. This flag when set, will allow the DWC core to
skip polling for L2/L3 Ready state and just wait for 10ms as recommended in
the PCIe spec r6.0, sec 5.3.3.2.1.
Fixes: a528d1a725 ("PCI: imx6: Use DWC common suspend resume method")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: renamed flag to skip_l23_ready and reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260114083300.3689672-2-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 142d5869f6 ]
This reverts commit 8d3bf19f1b.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
So revert the change that skipped dw_pcie_wait_for_link() if the Link up
IRQ was used by a vendor glue driver.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-14-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a9793b558 ]
This reverts commit 4581403f67.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-13-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ebdefb879 ]
This reverts commit ba4a2e2317.
Since the Link up IRQ support is going away, revert the MSI logic that got
added for it too.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: reworded the description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-12-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9ce5b3804 ]
This reverts commit 36971d6c5a.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-11-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc6298086b ]
This reverts commit ec9fd499b9.
While this fake hotplugging was a nice idea, it has shown that this feature
does not handle PCIe switches correctly:
pci_bus 0004:43: busn_res: can not insert [bus 43-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:43: busn_res: [bus 43-41] end is updated to 43
pci_bus 0004:43: busn_res: can not insert [bus 43] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:00.0: devices behind bridge are unusable because [bus 43] cannot be assigned for them
pci_bus 0004:44: busn_res: can not insert [bus 44-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:44: busn_res: [bus 44-41] end is updated to 44
pci_bus 0004:44: busn_res: can not insert [bus 44] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:02.0: devices behind bridge are unusable because [bus 44] cannot be assigned for them
pci_bus 0004:45: busn_res: can not insert [bus 45-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:45: busn_res: [bus 45-41] end is updated to 45
pci_bus 0004:45: busn_res: can not insert [bus 45] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:06.0: devices behind bridge are unusable because [bus 45] cannot be assigned for them
pci_bus 0004:46: busn_res: can not insert [bus 46-41] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci_bus 0004:46: busn_res: [bus 46-41] end is updated to 46
pci_bus 0004:46: busn_res: can not insert [bus 46] under [bus 42-41] (conflicts with (null) [bus 42-41])
pci 0004:42:0e.0: devices behind bridge are unusable because [bus 46] cannot be assigned for them
pci_bus 0004:42: busn_res: [bus 42-41] end is updated to 46
pci_bus 0004:42: busn_res: can not insert [bus 42-46] under [bus 41] (conflicts with (null) [bus 41])
pci 0004:41:00.0: devices behind bridge are unusable because [bus 42-46] cannot be assigned for them
pcieport 0004:40:00.0: bridge has subordinate 41 but max busn 46
During the initial scan, PCI core doesn't see the switch and since the Root
Port is not hot plug capable, the secondary bus number gets assigned as the
subordinate bus number. This means, the PCI core assumes that only one bus
will appear behind the Root Port since the Root Port is not hot plug
capable.
This works perfectly fine for PCIe endpoints connected to the Root Port,
since they don't extend the bus. However, if a PCIe switch is connected,
then there is a problem when the downstream busses starts showing up and
the PCI core doesn't extend the subordinate bus number and bridge resources
after initial scan during boot.
The long term plan is to migrate this driver to the upcoming pwrctrl APIs
that are supposed to handle this problem elegantly.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251222064207.3246632-9-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27a064aba2 ]
The CLKREQ# is an open drain, active low signal that is driven low by
the card to request reference clock. It's an optional signal added in
PCIe CEM r4.0, sec 2. Thus, this signal wouldn't be driven low if it's
not exposed on the slot.
On the i.MX95 EVK board, REFCLK to the host and endpoint is gated by this
CLKREQ# signal. So if the CLKREQ# signal is not driven by the endpoint, it
will gate the REFCLK to host too, leading to operational failure.
Hence, enable the REFCLK on this SoC by enabling the CLKREQ# override using
imx95_pcie_clkreq_override() helper during probe. This override should only
be cleared when the CLKREQ# signal is exposed on the slot.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251015030428.2980427-11-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5d712e5b8 ]
Some Rockchip PCIe Root Ports report bogus size of 1GiB for the BAR
memories and they cause below resource allocation issue during probe.
pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400 PCIe Root Port
pci 0000:00:00.0: BAR 0 [mem 0x00000000-0x3fffffff]
pci 0000:00:00.0: BAR 1 [mem 0x00000000-0x3fffffff]
pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref]
...
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: assigned
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: can't assign; no space
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: failed to assign
pci 0000:00:00.0: ROM [mem 0xf0200000-0xf020ffff pref]: assigned
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: releasing
pci 0000:00:00.0: ROM [mem 0xf0200000-0xf020ffff pref]: releasing
pci 0000:00:00.0: BAR 0 [mem 0x900000000-0x93fffffff]: assigned
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: can't assign; no space
pci 0000:00:00.0: BAR 1 [mem size 0x40000000]: failed to assign
Since there is no use of the Root Port BAR memories, disable both of them.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[mani: reworded the description and comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1766570461-138256-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfd2fdfd0a ]
During system suspend, if the PCIe link is not up, then there is no need
to broadcast PME_Turn_Off message and wait for L2/L3 transition. So skip
them.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20251218-pci-dwc-suspend-rework-v2-1-5a7778c6094a@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 613f3255a3 ]
Sophgo 2044 Root Ports advertise L0 and L1 capabilities without supporting
them. Since commit f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM
states for devicetree platforms") force enabled ASPM on all device tree
platforms, the issue became evident and the SG2044 Root Port started
breaking.
Hence, disable the L0s and L1 capabilities in the LINKCAP register for the
SG2044 Root Ports, so that these states won't get enabled.
Fixes: 467d9c0348 ("PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
[mani: reworded description and corrected fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20260109040756.731169-1-inochiama@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42b3c053b ]
In xilinx_pcie_init_irq_domain(), if xilinx_allocate_msi_domains() fails
after pcie->leg_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without cleaning
up the allocated IRQ domain, resulting in a resource leak. In
xilinx_free_msi_domains(), pcie->leg_domain is also neglected.
Add irq_domain_remove() call in the error path to properly release the
IRQ domain before returning the error. Also rename
xilinx_free_msi_domains() to xilinx_free_irq_domains() and add the release
of pcie->leg_domain to it.
Fixes: 313b64c3ae ("PCI: xilinx: Convert to MSI domains")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251219021615.965-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f0cdcddf8 ]
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc13256b6 ]
Though I couldn't confirm ASPM L0s support with the Qcom hardware team, a
bug report from Dmitry suggests that L0s is broken on this legacy SoC.
Hence, remove L0s support from the Root Port Link Capabilities in this SoC.
Since qcom_pcie_clear_aspm_l0s() is now used by more than one SoC config,
call it from qcom_pcie_host_init() instead.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-pci/4cp5pzmlkkht2ni7us6p3edidnk25l45xrp6w3fxguqcvhq2id@wjqqrdpkypkf
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126081718.8239-1-mani@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit df27c03b9e upstream.
Previously meson_pcie_link_up() only returned true if the link was in the
L0 state. This was incorrect because hardware autonomously manages
transitions between L0, L0s, and L1 while both components on the link stay
in D0. Those states should all be treated as "link is active".
Returning false when the device was in L0s or L1 broke config accesses
because dw_pcie_other_conf_map_bus() fails if the link is down, which
caused errors like this:
meson-pcie fc000000.pcie: error: wait linkup timeout
pci 0000:01:00.0: BAR 0: error updating (0xfc700004 != 0xffffffff)
Remove the LTSSM state check, timeout, speed check, and error message from
meson_pcie_link_up(), the dw_pcie_ops.link_up() method, so it is a simple
boolean check of whether the link is active. Timeouts and error messages
are handled at a higher level, e.g., dw_pcie_wait_for_link().
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Reported-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Closes: https://lore.kernel.org/r/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com
[bhelgaas: squash removal of unused WAIT_LINKUP_TIMEOUT by
Martin Blumenstingl <martin.blumenstingl@googlemail.com>:
https://patch.msgid.link/20260105125625.239497-1-martin.blumenstingl@googlemail.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on BananaPi M2S
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251103221930.1831376-1-helgaas@kernel.org
Link: https://patch.msgid.link/20260105125625.239497-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eff0306b10 upstream.
First of all, the driver was parsing the 'dbi' register region as 'elbi'.
This was due to DT mistakenly passing 'dbi' as 'elbi'. Since the DT is
now fixed to supply 'dbi' region, this driver can rely on the DWC core
driver to parse and map it.
However, to support the old DTs, if the 'elbi' region is found in DT, parse
and map the region as both 'dw_pcie::elbi_base' as 'dw_pcie::dbi_base'.
This will allow the driver to work with both broken and fixed DTs.
Also, skip parsing the 'elbi' region in DWC core if 'pci->elbi_base' was
already populated.
Fixes: 9c0ef6d34f ("PCI: amlogic: Add the Amlogic Meson PCIe controller driver")
Fixes: c96992a24b ("PCI: dwc: Add support for ELBI resource mapping")
Reported-by: Linnaea Lavia <linnaea-von-lavia@live.com>
Closes: https://lore.kernel.org/linux-pci/DM4PR05MB102707B8CDF84D776C39F22F2C7F0A@DM4PR05MB10270.namprd05.prod.outlook.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on Bananapi-M2S
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Cc: stable@vger.kernel.org # 6.2
Link: https://patch.msgid.link/20251101-pci-meson-fix-v1-3-c50dcc56ed6a@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9583f9d229 upstream.
caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
set PCI_EXP_LNKCAP_ASPM_L1 and (optionally) PCI_EXP_LNKCAP_ASPM_L0S in
PCI_EXP_LNKCAP (aka PCIE_RC_CFG_PRIV1_LINK_CAPABILITY in brcmstb).
But instead of using PCI_EXP_LNKCAP_ASPM_L1 and PCI_EXP_LNKCAP_ASPM_L0S
directly, it used PCIE_LINK_STATE_L1 and PCIE_LINK_STATE_L0S, which are
Linux-created values that only coincidentally matched the PCIe spec.
b478e162f2 ("PCI/ASPM: Consolidate link state defines") later changed
them so they no longer matched the PCIe spec, so the bits ended up in the
wrong place in PCI_EXP_LNKCAP.
Use PCI_EXP_LNKCAP_ASPM_L0S to clear L0s support when there's an
'aspm-no-l0s' property. Rely on brcmstb hardware to advertise L0s and/or
L1 support otherwise.
Fixes: caab002d50 ("PCI: brcmstb: Disable L0s component of ASPM if requested")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/linux-pci/20250925194424.GA2197200@bhelgaas
Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
[mani: reworded subject and description, added closes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251003170436.1446030-1-james.quinlan@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff529a9307 ]
pci_epc_mem_alloc_addr() allocates a CPU address from the ATU window phys
base and a page number. Set the ep->page_size so the resulting CPU address
is correctly aligned with the ATU required alignment.
Fixes: 151f3d29ba ("PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251114-atu_align_ep-v1-1-88da5366fa04@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa81d60990 ]
If the host has deasserted PERST# and started link training before the link
is started on EP side, enabling LTSSM before the endpoint registers are
initialized in the perst_irq handler results in probing incorrect values.
Thus, wait for the PERST# level-triggered interrupt to start link training
at the end of initialization and cleanup the stm32_pcie_[start stop]_link
functions.
Fixes: 151f3d29ba ("PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25")
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: wrap line]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251114-perst_ep-v1-1-e7976317a890@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d9c3f0e4 ]
Commit under Fixes introduced support for PCIe EP mode on AM654x platforms.
When the mode happens to be either "DW_PCIE_RC_TYPE" or "DW_PCIE_EP_TYPE",
the PCIe Controller is configured accordingly. However, when the mode is
neither of them, an error message is displayed, but the driver probe
succeeds. Since this "invalid" mode is not associated with a functional
PCIe Controller, the probe should fail.
Fix the behavior by exiting "ks_pcie_probe()" with the return value of
"-EINVAL" in addition to displaying the existing error message when the
mode is invalid.
Fixes: 23284ad677 ("PCI: keystone: Add support for PCIe EP in AM654x Platforms")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251029080547.1253757-4-s-vadapalli@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d312742f68 ]
Since the reliance on ARM-specific struct pci_sys_data was removed, this
driver can be compile-tested on other architectures.
While at it, make the help text a bit more generic, as some members of
the R-Car Gen2 family have a different number of internal PCI
controllers.
Fixes: 4a957563fe ("PCI: rcar-gen2: Convert to use modern host bridge probe functions")
Suggested-by: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
[bhelgaas: add rcar-gen2 to subject]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/00f75d6732eacce93f04ffaeedc415d2db714cd6.1759480426.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 932ec9dff6 ]
devm_pm_runtime_enable() is used in the probe, so pm_runtime_disable()
should not be called explicitly in the remove function.
Fixes: 1c72774df0 ("PCI: sg2042: Add Sophgo SG2042 PCIe driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Chen Wang <unicorn_wang@outlook.com> # on Pioneerbox.
Acked-by: Chen Wang <unicorn_wang@outlook.com>
Link: https://patch.msgid.link/242eca0ff6601de7966a53706e9950fbcb10aac8.1759169586.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=fYnS
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Restore custom qcom ASPM enablement code so L1 PM Substates are
enabled as they were in v6.17 even though the PCI core now enables
just L0s and L1 by default (Bjorn Helgaas)
- Size prefetchable bridge windows only when they actually exist, to
avoid a WARN_ON() regression (Ilpo Järvinen)
* tag 'pci-v6.18-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Do not size non-existing prefetchable window
Revert "PCI: qcom: Remove custom ASPM enablement code"
This reverts commit a729c16646.
Prior to a729c16646 ("PCI: qcom: Remove custom ASPM enablement code"),
the qcom controller driver enabled ASPM, including L0s, L1, and L1 PM
Substates, for all devices powered on at the time the controller driver
enumerates them.
ASPM was *not* enabled for devices powered on later by pwrctrl (unless the
kernel was built with PCIEASPM_POWERSAVE or PCIEASPM_POWER_SUPERSAVE, or
the user enabled ASPM via module parameter or sysfs).
After f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for
devicetree platforms"), the PCI core enabled all ASPM states for all
devices whether powered on initially or by pwrctrl, so a729c16646 was
unnecessary and reverted.
But f3ac2ff148 was too aggressive and broke platforms that didn't support
CLKREQ# or required device-specific configuration for L1 Substates, so
df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
enabled only L0s and L1.
On Qualcomm platforms, this left L1 Substates disabled, which was a
regression. Revert a729c16646 so L1 Substates will be enabled on devices
that are initially powered on. Devices powered on by pwrctrl will be
addressed later.
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/lkml/aPuXZlaawFmmsLmX@hovoldconsulting.com/
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251024210514.1365996-1-helgaas@kernel.org
-----BEGIN PGP SIGNATURE-----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=UcX7
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
This reverts commit 4660e50cf8.
Commit f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM
mechanism using iATU 'CFG Shift Feature'") enabled ECAM access by using
the config space start as DBI address.
However, this approach breaks vendor drivers that rely on the DBI address
for internal accesses, especially when the vendor config space is 256MB
aligned.
To resolve this, avoid using the DBI as the start of config space and
instead introduce a custom ECAM PCI ops implementation.
Revert the qcom specific ECAM preparation logic in 4660e50cf8 ("PCI:
qcom: Prepare for the DWC ECAM enablement") since it's no longer necessary.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251017-ecam_fix-v1-2-f6faa3d0edf3@oss.qualcomm.com
When the vendor configuration space is 256MB aligned, the DesignWare PCIe
host driver enables ECAM access and sets the DBI base to the start of the
config space. This causes vendor drivers to incorrectly program iATU
regions, as they rely on the DBI address for internal accesses.
To fix this, avoid overwriting the DBI base when ECAM is enabled. Instead,
introduce a custom pci_ops that accesses the DBI region directly for the
root bus and uses ECAM for other buses.
Fixes: f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Ron Economos <re@w6rz.net>
Closes: https://lore.kernel.org/all/eac81c57-1164-4d74-a1b4-6f353c577731@w6rz.net/
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://patch.msgid.link/20251017-ecam_fix-v1-1-f6faa3d0edf3@oss.qualcomm.com
907912c1da ("PCI: cadence: Use cdns_pcie_find_*capability() to avoid
hardcoding offsets") incorrectly searched for the MSI-X Capability ID
instead of the MSI Capability ID in cdns_pcie_ep_get_msi().
Search for PCI_CAP_ID_MSI, not PCI_CAP_ID_MSIX, to fix this problem.
Fixes: 907912c1da ("PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/r/aOfMk9BW8BH2P30V@laps/
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251010144307.12979-1-18255117159@163.com
-----BEGIN PGP SIGNATURE-----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=BUw/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
- Clear bootloader E_ECAM_CONTROL before merging in the new driver value
(Jani Nurminen)
* pci/controller/xilinx-nwl:
PCI: xilinx-nwl: Fix ECAM programming
- Correct the devm_kcalloc() argument order (Alok Tiwari)
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
- Rename 'root_bus' to 'root_port_bus' for clarity (Manivannan Sadhasivam)
* pci/controller/tegra:
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: tegra194: Fix duplicate PLL disable in pex_ep_event_pex_rst_assert()
PCI: tegra: Fix devm_kcalloc() argument order for port->phys allocation
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs
it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics STM32MP25
in host and endpoint modes (Christian Bruel)
* pci/controller/stm32:
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings
pinctrl: Add pinctrl_pm_select_init_state helper function
Documentation: pinctrl: Describe PM helper functions for standard states.
- Check for existence of struct cdns_pcie.ops before using it to allow
Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the Sophgo SG2042 PCIe controller (Chen
Wang)
* pci/controller/sophgo:
PCI: sg2042: Add Sophgo SG2042 PCIe driver
PCI: cadence: Check for the existence of cdns_pcie::ops before using it
dt-bindings: pci: Add Sophgo SG2042 PCIe host
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain() (Claudiu
Beznea)
- Drop the spinlock protecting the PMSR register; it's no longer required
since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting
error (Marek Vasut)
* pci/controller/rcar-host:
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: rcar-host: Drop PMSR spinlock
PCI: rcar-host: Pass proper IRQ domain to generic_handle_domain_irq()
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by the V4H
manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to timeouts
and failure to start the controller (Marek Vasut)
* pci/controller/rcar-gen4:
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: rcar-gen4: Fix PHY initialization
- Select PCI Power Control Slot driver so slot voltage rails can be turned
on/off if described in Root Port device tree node (Qiang Yu)
- Parse only PCI bridge child nodes in device tree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused probe
failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Fix typo in CURSOR macro names (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root Port node
or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than in each
driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift
Feature' and use this in the qcom driver (Krishna Chaitanya Chundru)
* pci/controller/qcom:
PCI: dwc: Support ECAM mechanism by enabling iATU 'CFG Shift Feature'
PCI: qcom: Prepare for the DWC ECAM enablement
PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'
PCI: dwc: Add support for ELBI resource mapping
PCI: qcom: Move host bridge 'phy' and 'reset' pointers to struct qcom_pcie_port
PCI: qcom: Fix macro typo for CURSOR
PCI: qcom: Add equalization settings for 8.0 GT/s and 32.0 GT/s
PCI: qcom: Restrict port parsing only to PCIe bridge child nodes
PCI: qcom: Select PCI Power Control Slot driver
- Return -ENOMEM directly instead of using dev_err_probe() (Xichao Zhao)
* pci/controller/plda:
PCI: plda: Remove dev_err_probe() when the errno is -ENOMEM
- Add optional sys clock ready time setting to avoid sys_clk_rdy signal
glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino
Del Regno)
* pci/controller/mediatek-gen3:
PCI: mediatek-gen3: Add support for MediaTek MT8196 SoC
dt-bindings: PCI: mediatek-gen3: Add support for MT6991/MT8196
PCI: mediatek-gen3: Implement sys clock ready time setting
- Use kcalloc() instead of kzalloc() to avoid potential integer overflow
(Qianfeng Rong)
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits
with error (Siddharth Vadapalli)
* pci/controller/keystone:
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
PCI: keystone: Use kcalloc() instead of kzalloc()
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the controller
latches the correct values on power-on (Siddharth Vadapalli)
- Correct the error message when j721e_pcie_ctrl_init() fails (Alok Tiwari)
* pci/controller/j721e:
PCI: j721e: Fix incorrect error message in probe()
PCI: j721e: Fix programming sequence of "strap" settings
PCI: j721e: Fix module autoloading
- Enable the 3.3V Vaux supply if available so devices can request wakeup
with either Beacon or WAKE# (Richard Zhu)
* pci/controller/imx6:
PCI: imx6: Enable the Vaux supply if available
- Verify that if DT specifies a single IRQ for all eDMA channels, it is
named 'dma' (Niklas Cassel)
- Remove qcom edma.nr_irqs initialization, which is redundant since
dw_pcie_edma_irq_verify() initializes it based on whether the DT contains
'dma' (single IRQ) or 'dmaX' (multiple IRQs) (Niklas Cassel)
* pci/controller/dwc-edma:
PCI: qcom-ep: Remove redundant edma.nr_irqs initialization
PCI: dwc: Verify the single eDMA IRQ in dw_pcie_edma_irq_verify()
- Update DT binding example to separate PERST# to a Root Port stanza to
make multiple Root Ports possible in the future (Sai Krishna Musham)
- Add driver support for Root Port PERST# (Sai Krishna Musham)
* pci/controller/amd-mdb:
PCI: amd-mdb: Add support for PCIe RP PERST# signal handling
dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST#
- Check for errors returned from pci_epc_get(), which returns IS_ERR(), not
NULL on error (Dan Carpenter)
- Fix pci_endpoint_test_ioctl() array underflow (Dan Carpenter)
- Document sysfs interface for BAR assignment of vNTB endpoint functions
(Jerome Brunet)
- Drop superfluous pci_epc_features initialization for unsupported
features; we only have to mention features that *are* supported (Niklas
Cassel)
- Skip IRQ tests if the IRQ is out of range (Christian Bruel)
- Fix pci-epf-test for controllers with fixed-size BARs smaller than
requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the doorbell test
case can be run more than once (Niklas Cassel)
- Check for NULL before releasing DMA channels to avoid a NULL pointer
dereference (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest
MSI_TEST test case (Niklas Cassel)
- Set tegra_pcie_epc_features.msi_capable so the pci_endpoint_test can use
the optimal IRQ type (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests don't
overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly skip
future PERST# assertion (Vidya Sagar)
* pci/endpoint:
PCI: tegra194: Handle errors in BPMP response
PCI: tegra194: Reset BARs when running in PCIe endpoint mode
PCI: tegra194: Set pci_epc_features::msi_capable to true
PCI: tegra194: Fix broken tegra_pcie_ep_raise_msi_irq()
PCI: endpoint: pci-epf-test: Add NULL check for DMA channels before release
PCI: endpoint: pci-epf-test: Fix doorbell test support
PCI: endpoint: pci-epf-test: Limit PCIe BAR size for fixed BARs
selftests: pci_endpoint: Skip IRQ test if IRQ is out of range.
misc: pci_endpoint_test: Cleanup extra 0 initialization
misc: pci_endpoint_test: Skip IRQ tests if irq is out of range
PCI: endpoint: Drop superfluous pci_epc_features initialization
Documentation: PCI: endpoint: Document BAR assignment
misc: pci_endpoint_test: Fix array underflow in pci_endpoint_test_ioctl()
PCI: endpoint: pci-ep-msi: Fix NULL vs IS_ERR() check in pci_epf_write_msi_msg()
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with
#defines, extracting fields with FIELD_GET(), etc (Hans Zhang)
- Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that
takes a config space accessor function so we can also use it in cases
where the usual config accessors aren't available (Hans Zhang)
- Similarly convert pci_find_next_ext_capability() to a
PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang)
- Implement dwc, dwc endpoint, and cadence capability search interfaces on
top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the
previous duplicated code (Hans Zhang)
- Search for capabilities in the cadence core instead of hard-coding their
offsets, which are subject to change (Hans Zhang)
* pci/capability-search:
PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets
PCI: cadence: Implement capability search using PCI core APIs
PCI: dwc: ep: Implement capability search using PCI core APIs
PCI: dwc: Implement capability search using PCI core APIs
PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP()
PCI: Refactor capability search into PCI_FIND_NEXT_CAP()
PCI: Clean up __pci_find_next_cap_ttl() readability
