[ Upstream commit 3bfb25fa2b ]
The op_type field CQ poll info structure is incorrectly
filled in with the queue type as opposed to the op_type
received in the CQEs. The wrong opcode could be decoded
and returned to the ULP.
Copy the op_type field received in the CQE in the CQ poll
info structure.
Fixes: 24419777e9 ("RDMA/irdma: Fix RQ completion opcode")
Signed-off-by: Sindhu Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230725155439.1057-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29900bf351 ]
Driver unload hits a hang during stress testing of load/unload.
stack trace snippet -
tasklet_kill at ffffffff9aabb8b2
bnxt_qplib_nq_stop_irq at ffffffffc0a805fb [bnxt_re]
bnxt_qplib_disable_nq at ffffffffc0a80c5b [bnxt_re]
bnxt_re_dev_uninit at ffffffffc0a67d15 [bnxt_re]
bnxt_re_remove_device at ffffffffc0a6af1d [bnxt_re]
tasklet_kill can hang if the tasklet is scheduled after it is disabled.
Modified the sequences to disable the interrupt first and synchronize
irq before disabling the tasklet.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 354f5bd985 ]
This interface will be used if the driver has not enabled interrupt
and/or interrupt is disabled for a short period of time.
Completion is not possible from interrupt so this interface does
self-polling.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-10-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 159cf95e42 ]
- Use __send_message_basic_sanity helper function.
- Do not retry posting same command if there is a queue full detection.
- ENXIO is used to indicate controller recovery.
- In the case of ERR_DEVICE_DETACHED state, the driver should not post
commands to the firmware, but also return fabricated written code.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-9-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65288a22dd ]
Whenever there is a fast path IO and create/destroy resources from
the slow path is happening in parallel, we may notice high latency
of slow path command completion.
Introduces a shadow queue depth to prevent the outstanding requests
to the FW. Driver will not allow more than #RCFW_CMD_NON_BLOCKING_SHADOW_QD
non-blocking commands to the Firmware.
Shadow queue depth is a soft limit only for non-blocking
commands. Blocking commands will be posted to the firmware
as long as there is a free slot.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-8-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3022cc1511 ]
Add a check to avoid waiting if driver already detects a
FW timeout. Return success for resource destroy in case
the device is detached. Add helper function to map timeout
error code to success.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-7-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf1d12ad5 ]
Use jiffies based timewait instead of counting iteration for
commands that block for FW response.
Also add a poll routine for control path commands. This is for
polling completion if the waiting commands timeout. This avoids cases
where the driver misses completion interrupts.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 29900bf351 ("RDMA/bnxt_re: Fix hang during driver unload")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5bbc65512 ]
HW may generate completions that indicates QP is destroyed.
Driver should not be scheduling any more completion handlers
for this QP, after the QP is destroyed. Since CQs are active
during the QP destroy, driver may still schedule completion
handlers. This can cause a race where the destroy_cq and poll_cq
running simultaneously.
Snippet of kernel panic while doing bnxt_re driver load unload in loop.
This indicates a poll after the CQ is freed.
[77786.481636] Call Trace:
[77786.481640] <TASK>
[77786.481644] bnxt_re_poll_cq+0x14a/0x620 [bnxt_re]
[77786.481658] ? kvm_clock_read+0x14/0x30
[77786.481693] __ib_process_cq+0x57/0x190 [ib_core]
[77786.481728] ib_cq_poll_work+0x26/0x80 [ib_core]
[77786.481761] process_one_work+0x1e5/0x3f0
[77786.481768] worker_thread+0x50/0x3a0
[77786.481785] ? __pfx_worker_thread+0x10/0x10
[77786.481790] kthread+0xe2/0x110
[77786.481794] ? __pfx_kthread+0x10/0x10
[77786.481797] ret_from_fork+0x2c/0x50
To avoid this, complete all completion handlers before returning the
destroy QP. If free_cq is called soon after destroy_qp, IB stack
will cancel the CQ work before invoking the destroy_cq verb and
this will prevent any race mentioned.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1689322969-25402-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc52aadbc1 ]
Commit 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
introduced a new struct mthca_sqp which doesn't contain struct mthca_qp
any longer. Placing a pointer of this new struct into qptable leads
to crashes, because mthca_poll_one() expects a qp pointer. Fix this
by putting the correct pointer into qptable.
Fixes: 21c2fe94ab ("RDMA/mthca: Combine special QP struct with mthca QP")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Link: https://lore.kernel.org/r/20230713141658.9426-1-tbogendoerfer@suse.de
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e15863015 ]
8d037973d4 ("RDMA/core: Refactor rdma_bind_addr") intoduces as regression
on irdma devices on certain tests which uses rdma CM, such as cmtime.
No connections can be established with the MAD QP experiences a fatal
error on the active side.
The cma destination address is not updated with the dst_addr when ULP
on active side calls rdma_bind_addr followed by rdma_resolve_addr.
The id_priv state is 'bound' in resolve_prepare_src and update is skipped.
This leaves the dgid passed into irdma driver to create an Address Handle
(AH) for the MAD QP at 0. The create AH descriptor as well as the ARP cache
entry is invalid and HW throws an asynchronous events as result.
[ 1207.656888] resolve_prepare_src caller: ucma_resolve_addr+0xff/0x170 [rdma_ucm] daddr=200.0.4.28 id_priv->state=7
[....]
[ 1207.680362] ice 0000:07:00.1 rocep7s0f1: caller: irdma_create_ah+0x3e/0x70 [irdma] ah_id=0 arp_idx=0 dest_ip=0.0.0.0
destMAC=00:00:64:ca:b7:52 ipvalid=1 raw=0000:0000:0000:0000:0000:ffff:0000:0000
[ 1207.682077] ice 0000:07:00.1 rocep7s0f1: abnormal ae_id = 0x401 bool qp=1 qp_id = 1, ae_src=5
[ 1207.691657] infiniband rocep7s0f1: Fatal error (1) on MAD QP (1)
Fix this by updating the CMA destination address when the ULP calls
a resolve address with the CM state already bound.
Fixes: 8d037973d4 ("RDMA/core: Refactor rdma_bind_addr")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230712234133.1343-1-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4984eb5145 ]
On code inspection, there are many instances in the driver where
CEQE and AEQE fields written to by HW are read without guaranteeing
that the polarity bit has been read and checked first.
Add a read barrier to avoid reordering of loads on the CEQE/AEQE fields
prior to checking the polarity bit.
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230711175253.1289-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d64b1ee12a ]
This code is trying to ensure that only the flags specified in the list
are allowed. The problem is that ucmd->rx_hash_fields_mask is a u64 and
the flags are an enum which is treated as a u32 in this context. That
means the test doesn't check whether the highest 32 bits are zero.
Fixes: 4d02ebd9bb ("IB/mlx4: Fix RSS hash fields restrictions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/233ed975-982d-422a-b498-410f71d8a101@moroto.mountain
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3099bcdc19 ]
bnxt_qplib_service_creq can be called from interrupt or tasklet or
process context. So the function take irq variant of spin_lock.
But when wake_up is invoked with the lock held, it is putting the
calling context to sleep.
[exception RIP: __wake_up_common+190]
RIP: ffffffffb7539d7e RSP: ffffa73300207ad8 RFLAGS: 00000083
RAX: 0000000000000001 RBX: ffff91fa295f69b8 RCX: dead000000000200
RDX: ffffa733344af940 RSI: ffffa73336527940 RDI: ffffa73336527940
RBP: 000000000000001c R8: 0000000000000002 R9: 00000000000299c0
R10: 0000017230de82c5 R11: 0000000000000002 R12: ffffa73300207b28
R13: 0000000000000000 R14: ffffa733341bf928 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
Call the wakeup after releasing the lock.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-3-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0af91306e1 ]
Driver is not handling the wraparound of the mbox producer index correctly.
Currently the wraparound happens once u32 max is reached.
Bit 31 of the producer index register is special and should be set
only once for the first command. Because the producer index overflow
setting bit31 after a long time, FW goes to initialization sequence
and this causes FW hang.
Fix is to wraparound the mbox producer index once it reaches u16 max.
Fixes: cee0c7bba4 ("RDMA/bnxt_re: Refactor command queue management code")
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/1686308514-11996-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 425e1c9018 ]
The subroutine rxe_check_bind_mw() in rxe_mw.c performs checks on the mw
access flags before they are set so they always succeed. This patch
instead checks the access flags passed in the send wqe.
Fixes: 32a577b4c3 ("RDMA/rxe: Add support for bind MW work requests")
Link: https://lore.kernel.org/r/20230530221334.89432-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf5b608fb0 ]
The return value of set_hem has been fixed to ENODEV, which will lead a
diagnostic information missing.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Link: https://lore.kernel.org/r/20230523121641.3132102-3-huangjunxian6@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9358de193 ]
The hfi1 user SDMA pinned-page cache will leave a stale cache entry when
the cache-entry's virtual address range is invalidated but that cache
entry is in-use by an outstanding SDMA request.
Subsequent user SDMA requests with buffers in or spanning the virtual
address range of the stale cache entry will result in packets constructed
from the wrong memory, the physical pages pointed to by the stale cache
entry.
To fix this, remove mmu_rb_node cache entries from the mmu_rb_handler
cache independent of the cache entry's refcount. Add 'struct kref
refcount' to struct mmu_rb_node and manage mmu_rb_node lifetime with
kref_get() and kref_put().
mmu_rb_node.refcount makes sdma_mmu_node.refcount redundant. Remove
'atomic_t refcount' from struct sdma_mmu_node and change sdma_mmu_node
code to use mmu_rb_node.refcount.
Move the mmu_rb_handler destructor call after a
wait-for-SDMA-request-completion call so mmu_rb_nodes that need
mmu_rb_handler's workqueue to queue themselves up for destruction from an
interrupt context may do so.
Fixes: f48ad614c1 ("IB/hfi1: Move driver out of staging")
Fixes: 00cbce5cbf ("IB/hfi1: Fix bugs with non-PAGE_SIZE-end multi-iovec user SDMA requests")
Link: https://lore.kernel.org/r/168451393605.3700681.13493776139032178861.stgit@awfm-02.cornelisnetworks.com
Reviewed-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Brendan Cunningham <bcunningham@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b002760f87 ]
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") triggers a
warning for fortified memset():
In function 'fortify_memset_chk',
inlined from 'irdma_clr_wqes' at drivers/infiniband/hw/irdma/uk.c:103:4:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
493 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The problem here isthat the inner array only has four 8-byte elements, so
clearing 4096 bytes overflows that. As this structure is part of an outer
array, change the code to pass a pointer to the irdma_qp_quanta instead,
and change the size argument for readability, matching the comment above
it.
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Link: https://lore.kernel.org/r/20230523111859.2197825-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43774bc156 ]
During destroy_qp, driver sets the qp handle in the existing CQEs
belonging to the QP being destroyed to NULL. As a result, a poll_cq after
destroy_qp can report unnecessary messages. Remove this noise from system
logs.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-6-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b989f90cef ]
The NULL check inside bnxt_re_update_gid() always return false. If
sgid_tbl->tbl is not allocated, then dev_init would have failed.
Fixes: 5fac5b1b29 ("RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured")
Link: https://lore.kernel.org/r/1684478897-12247-5-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff2e4bfd16 ]
bnxt_re currently uses the names "bnxt_qplib_creq" and "bnxt_qplib_nq-0"
while registering IRQs. There is no way to distinguish the IRQs of
different device ports when there are multiple IB devices registered.
This could make the scenarios worse where one want to pin IRQs of a device
port to certain CPUs.
Fixed the code to use unique names which has PCI BDF information while
registering interrupts like: "bnxt_re-nq-0@pci:0000:65:00.0" and
"bnxt_re-creq@pci:0000:65:00.1".
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-4-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b3ee47796 ]
If there is no cleanup needed then just return directly. This cleans up
the code and improve readability.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-3-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab112ee789 ]
When the ulp hook to start the IRQ fails because the rings are not
available, tasklets are not enabled. In this case when the driver is
unloaded, driver calls CREQ tasklet_kill. This causes an indefinite hang
as the tasklet is not enabled.
Driver shouldn't call tasklet_kill if it is not enabled. So using the
creq->requested and nq->requested flags to identify if both tasklets/irqs
are registered. Checking this flag while scheduling the tasklet from
ISR. Also, added a cleanup for disabling tasklet, in case request_irq
fails during start_irq.
Check for return value for bnxt_qplib_rcfw_start_irq and in case the
bnxt_qplib_rcfw_start_irq fails, return bnxt_re_start_irq without
attempting to start NQ IRQs.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684478897-12247-2-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent patch replaced a tasklet execution of cq->comp_handler by a
direct call. While this made sense it let changes to cq->notify state be
unprotected and assumed that the cq completion machinery and the ulp done
callbacks were reentrant. The result is that in some cases completion
events can be lost. This patch moves the cq->comp_handler call inside of
the spinlock in rxe_cq_post which solves both issues. This is compatible
with the matching code in the request notify verb.
Fixes: 78b26a3353 ("RDMA/rxe: Remove tasklet call from rxe_cq.c")
Link: https://lore.kernel.org/r/20230612155032.17036-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.
When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released
Fixes: b02efbfc9a ("iser-target: Fix implicit termination of connections")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-4-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption
Fixes: bd3792205a ("iser-target: Fix pending connections handling in target stack shutdown sequnce")
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Link: https://lore.kernel.org/r/20230606102531.162967-3-saravanan.vajravel@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The cited commit aimed to ensure that Virtual Functions (VFs) assign a
queue affinity to a Queue Pair (QP) to distribute traffic when
the LAG master creates a hardware LAG. If the affinity was set while
the hardware was not in LAG, the firmware would ignore the affinity value.
However, this commit unintentionally assigned an affinity to QPs on the LAG
master's VPORT even if the RDMA device was not marked as LAG-enabled.
In most cases, this was not an issue because when the hardware entered
hardware LAG configuration, the RDMA device of the LAG master would be
destroyed and a new one would be created, marked as LAG-enabled.
The problem arises when a user configures Equal-Cost Multipath (ECMP).
In ECMP mode, traffic can be directed to different physical ports based on
the queue affinity, which is intended for use by VPORTS other than the
E-Switch manager. ECMP mode is supported only if both E-Switch managers are
in switchdev mode and the appropriate route is configured via IP. In this
configuration, the RDMA device is not destroyed, and we retain the RDMA
device that is not marked as LAG-enabled.
To ensure correct behavior, Send Queues (SQs) opened by the E-Switch
manager through verbs should be assigned strict affinity. This means they
will only be able to communicate through the native physical port
associated with the E-Switch manager. This will prevent the firmware from
assigning affinity and will not allow the SQs to be remapped in case of
failover.
Fixes: 802dcc7fc5 ("RDMA/mlx5: Support TX port affinity for VF drivers in LAG mode")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/425b05f4da840bc684b0f7e8ebf61aeb5cef09b0.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Fix ib_uverbs_event_read() to consider event queue closing also upon
non-blocking mode.
Once the queue is closed (e.g. hot-plug flow) all the existing events
are cleaned-up as part of ib_uverbs_free_event_queue().
An application that uses the non-blocking FD mode should get -EIO in
that case to let it knows that the device was removed already.
Otherwise, it can loose the indication that the device was removed and
won't recover.
As part of that, refactor the code to have a single flow with regards to
'is_closed' for both blocking and non-blocking modes.
Fixes: 14e23bd6d2 ("RDMA/core: Fix locking in ib_uverbs_event_read")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/97b00116a1e1e13f8dc4ec38a5ea81cf8c030210.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
According to the IB specification rel-1.6, section 3.5.3:
"QKEYs with the most significant bit set are considered controlled
QKEYs, and a HCA does not allow a consumer to arbitrarily specify a
controlled QKEY."
Thus, block non-privileged users from setting such a QKEY.
Cc: stable@vger.kernel.org
Fixes: bc38a6abdd ("[PATCH] IB uverbs: core implementation")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://lore.kernel.org/r/c00c809ddafaaf87d6f6cb827978670989a511b3.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set static rate to 0 as it should be discovered by path query and
has no meaning for RoCE.
This also avoid of using the rtnl lock and ethtool API, which is
a bottleneck when try to setup many rdma-cm connections at the same
time, especially with multiple processes.
Fixes: 3c86aa70bf ("RDMA/cm: Add RDMA CM support for IBoE devices")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f72a4f8b667b803aee9fa794069f61afb5839ce4.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously we used the core device associated to the IB device in order
to do the Q-counters query to the FW, but in LAG mode it is possible
that the core device isn't the one that created this VF.
Hence instead of using the core device to query the Q-counters
we use the ESW core device which is guaranteed to be that of the VF.
Fixes: d22467a71e ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/778d7d7a24892348d0bdef17d2e5f9e044717e86.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Previously Q-counters data was being allocated over the PF for all of
the available vports, however that isn't necessary.
Since each VF or SF has a Q-counter allocated for itself.
So we only need to allocate two counters data structures, one for the
device counters, and one for all the other vports to expose the
representors, since they only need to read from it in order to
determine mainly counters numbers and names, so they can all share.
This in turn also solves a bug we previously had where we couldn't
switch the device to switchdev mode when there were more than 128 SF/VFs
configured, since that is the maximum amount of Q-counters available for
a single port
Fixes: d22467a71e ("RDMA/mlx5: Expand switchdev Q-counters to expose representor statistics")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/f54671df16e2227a069b229b33b62cd9ee24c475.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A misbehaved user can create a steering anchor that points to a kernel
flow table and then destroy the anchor without freeing the associated
STC. This creates a problem as the kernel can't destroy the flow
table since there is still a reference to it. As a result, this can
exhaust all available flow table resources, preventing other users from
using the RDMA device.
To prevent this problem, a solution is implemented where a special flow
table with two steering rules is created when a user creates a steering
anchor for the first time. The rules include one that drops all traffic
and another that points to the kernel flow table. If the steering anchor
is destroyed, only the rule pointing to the kernel's flow table is removed.
Any traffic reaching the special flow table after that is dropped.
Since the special flow table is not destroyed when the steering anchor is
destroyed, any issues are prevented from occurring. The remaining resources
are only destroyed when the RDMA device is destroyed, which happens after
all DEVX objects are freed, including the STCs, thus mitigating the issue.
Fixes: 0c6ab0ca9a ("RDMA/mlx5: Expose steering anchor to userspace")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/b4a88a871d651fa4e8f98d552553c1cfe9ba2cd6.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Delay drop data is initiated for PFs that have the capability of
rq_delay_drop and are in roce profile.
However, PFs with RAW ethernet profile do not initiate delay drop data
on function load, causing kernel panic if delay drop struct members are
accessed later on in case a dropless RQ is created.
Thus, stage the delay drop initialization as part of RAW ethernet
PF loading process.
Fixes: b5ca15ad7e ("IB/mlx5: Add proper representors support")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://lore.kernel.org/r/2e9d386785043d48c38711826eb910315c1de141.1685960567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In the following:
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
assign_lock_key kernel/locking/lockdep.c:982 [inline]
register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295
__lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951
lock_acquire kernel/locking/lockdep.c:5691 [inline]
lock_acquire+0x1b1/0x520 kernel/locking/lockdep.c:5656
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162
skb_dequeue+0x20/0x180 net/core/skbuff.c:3639
drain_resp_pkts drivers/infiniband/sw/rxe/rxe_comp.c:555 [inline]
rxe_completer+0x250d/0x3cc0 drivers/infiniband/sw/rxe/rxe_comp.c:652
rxe_qp_do_cleanup+0x1be/0x820 drivers/infiniband/sw/rxe/rxe_qp.c:761
execute_in_process_context+0x3b/0x150 kernel/workqueue.c:3473
__rxe_cleanup+0x21e/0x370 drivers/infiniband/sw/rxe/rxe_pool.c:233
rxe_create_qp+0x3f6/0x5f0 drivers/infiniband/sw/rxe/rxe_verbs.c:583
This is a use-before-initialization problem.
It happens because rxe_qp_do_cleanup is called during error unwind before
the struct has been fully initialized.
Move the initialization of the skb earlier.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230602035408.741534-1-yanjun.zhu@intel.com
Reported-by: syzbot+eba589d8f49c73d356da@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After commit 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
the active_{speed, width} attributes are reported incorrectly, This is
happening because ib_get_eth_speed() is called only once from
bnxt_re_ib_init() - Fix this issue by calling ib_get_eth_speed() from
bnxt_re_query_port().
Fixes: 6d758147c7 ("RDMA/bnxt_re: Use auxiliary driver interface")
Link: https://lore.kernel.org/r/20230529153525.87254-1-kheib@redhat.com
Signed-off-by: Kamal Heib <kheib@redhat.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a reference count error in error path code and a potential race
in check_rkey() in rxe_resp.c. When looking up the rkey for a memory
window the reference to the mw from rxe_lookup_mw() is dropped before a
reference is taken on the mr referenced by the mw. If the mr is destroyed
immediately after the call to rxe_put(mw) the mr pointer is unprotected
and may end up pointing at freed memory. The rxe_get(mr) call should take
place before the rxe_put(mw) call.
All errors in check_rkey() call rxe_put(mw) if mw is not NULL but it was
already called after the above. The mw pointer should be set to NULL after
the rxe_put(mw) call to prevent this from happening.
Fixes: cdd0b85675 ("RDMA/rxe: Implement memory access through MWs")
Link: https://lore.kernel.org/r/20230517211509.1819998-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_net.c a received packet, from udp or loopback, is passed to
rxe_rcv() in rxe_recv.c as a udp packet. I.e. skb->data is pointing at the
udp header. But rxe_rcv() makes length checks to verify the packet is long
enough to hold the roce headers as if it were a roce
packet. I.e. skb->data pointing at the bth header. A runt packet would
appear to have 8 more bytes than it actually does which may lead to
incorrect behavior.
This patch calls skb_pull() to adjust the skb to point at the bth header
before calling rxe_rcv() which fixes this error.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20230517172242.1806340-1-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In current design:
1. PD and clt_path->s.dev are shared among connections.
2. every con[n]'s cleanup phase will call destroy_con_cq_qp()
3. clt_path->s.dev will be always decreased in destroy_con_cq_qp(), and
when clt_path->s.dev become zero, it will destroy PD.
4. when con[1] failed to create, con[1] will not take clt_path->s.dev,
but it try to decreased clt_path->s.dev
So, in case create_cm(con[0]) succeeds but create_cm(con[1]) fails,
destroy_con_cq_qp(con[1]) will be called first which will destroy the PD
while this PD is still taken by con[0].
Here, we refactor the error path of create_cm() and init_conns(), so that
we do the cleanup in the order they are created.
The warning occurs when destroying RXE PD whose reference count is not
zero.
rnbd_client L597: Mapping device /dev/nvme0n1 on session client, (access_mode: rw, nr_poll_queues: 0)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 26407 at drivers/infiniband/sw/rxe/rxe_pool.c:256 __rxe_cleanup+0x13a/0x170 [rdma_rxe]
Modules linked in: rpcrdma rdma_ucm ib_iser rnbd_client libiscsi rtrs_client scsi_transport_iscsi rtrs_core rdma_cm iw_cm ib_cm crc32_generic rdma_rxe udp_tunnel ib_uverbs ib_core kmem device_dax nd_pmem dax_pmem nd_vme crc32c_intel fuse nvme_core nfit libnvdimm dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua dm_mirror dm_region_hash dm_log dm_mod
CPU: 0 PID: 26407 Comm: rnbd-client.sh Kdump: loaded Not tainted 6.2.0-rc6-roce-flush+ #53
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:__rxe_cleanup+0x13a/0x170 [rdma_rxe]
Code: 45 84 e4 0f 84 5a ff ff ff 48 89 ef e8 5f 18 71 f9 84 c0 75 90 be c8 00 00 00 48 89 ef e8 be 89 1f fa 85 c0 0f 85 7b ff ff ff <0f> 0b 41 bc ea ff ff ff e9 71 ff ff ff e8 84 7f 1f fa e9 d0 fe ff
RSP: 0018:ffffb09880b6f5f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff99401f15d6a8 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffffbac8234b RDI: 00000000ffffffff
RBP: ffff99401f15d6d0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000002d82 R11: 0000000000000000 R12: 0000000000000001
R13: ffff994101eff208 R14: ffffb09880b6f6a0 R15: 00000000fffffe00
FS: 00007fe113904740(0000) GS:ffff99413bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff6cde656c8 CR3: 000000001f108004 CR4: 00000000001706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
rxe_dealloc_pd+0x16/0x20 [rdma_rxe]
ib_dealloc_pd_user+0x4b/0x80 [ib_core]
rtrs_ib_dev_put+0x79/0xd0 [rtrs_core]
destroy_con_cq_qp+0x8a/0xa0 [rtrs_client]
init_path+0x1e7/0x9a0 [rtrs_client]
? __pfx_autoremove_wake_function+0x10/0x10
? lock_is_held_type+0xd7/0x130
? rcu_read_lock_sched_held+0x43/0x80
? pcpu_alloc+0x3dd/0x7d0
? rtrs_clt_init_stats+0x18/0x40 [rtrs_client]
rtrs_clt_open+0x24f/0x5a0 [rtrs_client]
? __pfx_rnbd_clt_link_ev+0x10/0x10 [rnbd_client]
rnbd_clt_map_device+0x6a5/0xe10 [rnbd_client]
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/1682384563-2-4-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Tested-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The last iu->buf will leak if ib_dma_mapping_error() fails.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/1682384563-2-3-git-send-email-lizhijian@fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If the local invalidate fence is indicated in the WR, only the read fence
is currently being set in WQE. Fix this to set both the read and local
fence in the WQE.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-4-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is a window where the poll cq may use a QP that has been freed.
This can happen if a CQE is polled before irdma_clean_cqes() can clear the
CQE's related to the QP and the destroy QP races to free the QP memory.
then the QP structures are used in irdma_poll_cq. Fix this by moving the
clearing of CQE's before the reference is removed and the QP is destroyed.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-3-shiraz.saleem@intel.com
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Congestion control needs to be enabled only on the PFs. FW fails the
command if issued on VFs. Avoid sending the command on VFs.
Fixes: f13bcef04b ("RDMA/bnxt_re: Enable congestion control by default")
Link: https://lore.kernel.org/r/1684397461-23082-4-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Inside bnxt_qplib_create_cq(), when the check for NULL DPI fails, driver
returns directly without freeing the memory allocated inside
bnxt_qplib_alloc_init_hwq() routine.
Fixed this by moving the check for NULL DPI before invoking
bnxt_qplib_alloc_init_hwq().
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Link: https://lore.kernel.org/r/1684397461-23082-2-git-send-email-selvin.xavier@broadcom.com
Reviewed-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
