Commit graph

766,493 commits

Author SHA1 Message Date
Alex Deucher
b5e3241316 drm/amdgpu: save/restore backlight level in legacy dce code
Save/restore the backlight level scratch register in S3/S4 so the
backlight level comes back at the previously requested level.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047
Fixes: 4ec6ecf48c (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling)
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:39:51 -05:00
Christian König
0f4f715bc6 drm/radeon: fix prime teardown order
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:39:42 -05:00
Christian König
342038d924 drm/amdgpu: fix prime teardown order
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:39:35 -05:00
Martin Wilck
43c9fc509f rdma_rxe: make rxe work over 802.1q VLAN devices
This patch fixes RDMA/rxe over 802.1q VLAN devices.

Without it, I observed the following behavior:

a) adding a VLAN device to RXE via rxe_net_add() creates a non-functional
   RDMA device. This is caused by the logic in enum_all_gids_of_dev_cb() /
   is_eth_port_of_netdev(), which only considers networks connected to
   "upper devices" of the configured network device, resulting in an empty
   set of gids for a VLAN interface that is an "upper device" itself.
   Later attempts to connect via this rdma device fail in cma_acuire_dev()
   because no gids can be resolved.

b) adding the master device of the VLAN device instead seems to work
   initially, target addresses via VLAN devices are resolved successfully.
   But the connection times out because no 802.1q VLAN headers are
   inserted in the ethernet packets, which are therefore never received.
   This happens because the RXE layer sends the packets via the master
   device rather than the VLAN device.

The problem could be solved by changing either a) or b). My thinking was
that the logic in a) was created deliberately, thus I decided to work on
b). It turns out that the information about the VLAN interface for the gid
at hand is available in the AV information. My patch converts the RXE code
to use this netdev instead of rxe->ndev. With this change, RXE over vlan
works on my test system.

Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:33:25 -04:00
Leon Romanovsky
0c81ffc60d RDMA/ucma: Don't allow join attempts for unsupported AF family
Users can provide garbage while calling to ucma_join_ip_multicast(),
it will indirectly cause to rdma_addr_size() return 0, making the
call to ucma_process_join(), which had the right checks, but it is
better to check the input as early as possible.

The following crash from syzkaller revealed it.

kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 0 PID: 4113 Comm: syz-executor0 Not tainted 4.16.0-rc5+ #261
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801ca81f8f0 EFLAGS: 00010286
RAX: 0000000000000022 RBX: 1ffff10039503f23 RCX: 0000000000000000
RDX: 0000000000000022 RSI: 1ffff10039503ed3 RDI: ffffed0039503f12
RBP: ffff8801ca81f8f0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000006 R11: 0000000000000000 R12: ffff8801ca81f998
R13: ffff8801ca81f938 R14: ffff8801ca81fa58 R15: 000000000000fa00
FS:  0000000000000000(0000) GS:ffff8801db200000(0063) knlGS:000000000a12a900
CS:  0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000008138024 CR3: 00000001cbb58004 CR4: 00000000001606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 memcpy include/linux/string.h:344 [inline]
 ucma_join_ip_multicast+0x36b/0x3b0 drivers/infiniband/core/ucma.c:1421
 ucma_write+0x2d6/0x3d0 drivers/infiniband/core/ucma.c:1633
 __vfs_write+0xef/0x970 fs/read_write.c:480
 vfs_write+0x189/0x510 fs/read_write.c:544
 SYSC_write fs/read_write.c:589 [inline]
 SyS_write+0xef/0x220 fs/read_write.c:581
 do_syscall_32_irqs_on arch/x86/entry/common.c:330 [inline]
 do_fast_syscall_32+0x3ec/0xf9f arch/x86/entry/common.c:392
 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139
RIP: 0023:0xf7f9ec99
RSP: 002b:00000000ff8172cc EFLAGS: 00000282 ORIG_RAX: 0000000000000004
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000020000100
RDX: 0000000000000063 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 42 2c e3 fb eb de
55 48 89 fe 48 c7 c7 80 75 98 86 48 89 e5 e8 85 95 94 fb <0f> 0b 90 90 90 90
90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801ca81f8f0

Fixes: 5bc2b7b397 ("RDMA/ucma: Allow user space to specify AF_IB when joining multicast")
Reported-by: <syzbot+2287ac532caa81900a4e@syzkaller.appspotmail.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:31:11 -04:00
Leon Romanovsky
7688f2c3bb RDMA/ucma: Fix access to non-initialized CM_ID object
The attempt to join multicast group without ensuring that CMA device
exists will lead to the following crash reported by syzkaller.

[   64.076794] BUG: KASAN: null-ptr-deref in rdma_join_multicast+0x26e/0x12c0
[   64.076797] Read of size 8 at addr 00000000000000b0 by task join/691
[   64.076797]
[   64.076800] CPU: 1 PID: 691 Comm: join Not tainted 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.076802] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.076803] Call Trace:
[   64.076809]  dump_stack+0x5c/0x77
[   64.076817]  kasan_report+0x163/0x380
[   64.085859]  ? rdma_join_multicast+0x26e/0x12c0
[   64.086634]  rdma_join_multicast+0x26e/0x12c0
[   64.087370]  ? rdma_disconnect+0xf0/0xf0
[   64.088579]  ? __radix_tree_replace+0xc3/0x110
[   64.089132]  ? node_tag_clear+0x81/0xb0
[   64.089606]  ? idr_alloc_u32+0x12e/0x1a0
[   64.090517]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.091768]  ? tracing_record_taskinfo+0x10/0xc0
[   64.092340]  ? idr_alloc+0x76/0xc0
[   64.092951]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.093632]  ? ucma_process_join+0x23d/0x460
[   64.094510]  ucma_process_join+0x23d/0x460
[   64.095199]  ? ucma_migrate_id+0x440/0x440
[   64.095696]  ? futex_wake+0x10b/0x2a0
[   64.096159]  ucma_join_multicast+0x88/0xe0
[   64.096660]  ? ucma_process_join+0x460/0x460
[   64.097540]  ? _copy_from_user+0x5e/0x90
[   64.098017]  ucma_write+0x174/0x1f0
[   64.098640]  ? ucma_resolve_route+0xf0/0xf0
[   64.099343]  ? rb_erase_cached+0x6c7/0x7f0
[   64.099839]  __vfs_write+0xc4/0x350
[   64.100622]  ? perf_syscall_enter+0xe4/0x5f0
[   64.101335]  ? kernel_read+0xa0/0xa0
[   64.103525]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.105510]  ? syscall_exit_register+0x2a0/0x2a0
[   64.107359]  ? __switch_to+0x351/0x640
[   64.109285]  ? fsnotify+0x899/0x8f0
[   64.111610]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.113876]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.115813]  ? ring_buffer_record_is_on+0xd/0x20
[   64.117824]  ? __fget+0xa8/0xf0
[   64.119869]  vfs_write+0xf7/0x280
[   64.122001]  SyS_write+0xa1/0x120
[   64.124213]  ? SyS_read+0x120/0x120
[   64.126644]  ? SyS_read+0x120/0x120
[   64.128563]  do_syscall_64+0xeb/0x250
[   64.130732]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.132984] RIP: 0033:0x7f5c994ade99
[   64.135699] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.138740] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.141056] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.143536] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.146017] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.148608] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.151060]
[   64.153703] Disabling lock debugging due to kernel taint
[   64.156032] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[   64.159066] IP: rdma_join_multicast+0x26e/0x12c0
[   64.161451] PGD 80000001d0298067 P4D 80000001d0298067 PUD 1dea39067 PMD 0
[   64.164442] Oops: 0000 [#1] SMP KASAN PTI
[   64.166817] CPU: 1 PID: 691 Comm: join Tainted: G    B 4.16.0-rc1-00219-gb97853b65b93 #23
[   64.170004] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-proj4
[   64.174985] RIP: 0010:rdma_join_multicast+0x26e/0x12c0
[   64.177246] RSP: 0018:ffff8801c8207860 EFLAGS: 00010282
[   64.179901] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff94789522
[   64.183344] RDX: 1ffffffff2d50fa5 RSI: 0000000000000297 RDI: 0000000000000297
[   64.186237] RBP: ffff8801c8207a50 R08: 0000000000000000 R09: ffffed0039040ea7
[   64.189328] R10: 0000000000000001 R11: ffffed0039040ea6 R12: 0000000000000000
[   64.192634] R13: 0000000000000000 R14: ffff8801e2022800 R15: ffff8801d4ac2400
[   64.196105] FS:  00007f5c99b98700(0000) GS:ffff8801e5d00000(0000) knlGS:0000000000000000
[   64.199211] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   64.202046] CR2: 00000000000000b0 CR3: 00000001d1c48004 CR4: 00000000003606a0
[   64.205032] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   64.208221] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   64.211554] Call Trace:
[   64.213464]  ? rdma_disconnect+0xf0/0xf0
[   64.216124]  ? __radix_tree_replace+0xc3/0x110
[   64.219337]  ? node_tag_clear+0x81/0xb0
[   64.222140]  ? idr_alloc_u32+0x12e/0x1a0
[   64.224422]  ? __fprop_inc_percpu_max+0x150/0x150
[   64.226588]  ? tracing_record_taskinfo+0x10/0xc0
[   64.229763]  ? idr_alloc+0x76/0xc0
[   64.232186]  ? idr_alloc_u32+0x1a0/0x1a0
[   64.234505]  ? ucma_process_join+0x23d/0x460
[   64.237024]  ucma_process_join+0x23d/0x460
[   64.240076]  ? ucma_migrate_id+0x440/0x440
[   64.243284]  ? futex_wake+0x10b/0x2a0
[   64.245302]  ucma_join_multicast+0x88/0xe0
[   64.247783]  ? ucma_process_join+0x460/0x460
[   64.250841]  ? _copy_from_user+0x5e/0x90
[   64.253878]  ucma_write+0x174/0x1f0
[   64.257008]  ? ucma_resolve_route+0xf0/0xf0
[   64.259877]  ? rb_erase_cached+0x6c7/0x7f0
[   64.262746]  __vfs_write+0xc4/0x350
[   64.265537]  ? perf_syscall_enter+0xe4/0x5f0
[   64.267792]  ? kernel_read+0xa0/0xa0
[   64.270358]  ? perf_sched_cb_inc+0xc0/0xc0
[   64.272575]  ? syscall_exit_register+0x2a0/0x2a0
[   64.275367]  ? __switch_to+0x351/0x640
[   64.277700]  ? fsnotify+0x899/0x8f0
[   64.280530]  ? fsnotify_unmount_inodes+0x170/0x170
[   64.283156]  ? __fsnotify_update_child_dentry_flags+0x30/0x30
[   64.286182]  ? ring_buffer_record_is_on+0xd/0x20
[   64.288749]  ? __fget+0xa8/0xf0
[   64.291136]  vfs_write+0xf7/0x280
[   64.292972]  SyS_write+0xa1/0x120
[   64.294965]  ? SyS_read+0x120/0x120
[   64.297474]  ? SyS_read+0x120/0x120
[   64.299751]  do_syscall_64+0xeb/0x250
[   64.301826]  entry_SYSCALL_64_after_hwframe+0x21/0x86
[   64.304352] RIP: 0033:0x7f5c994ade99
[   64.306711] RSP: 002b:00007f5c99b97d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[   64.309577] RAX: ffffffffffffffda RBX: 00000000200001e4 RCX: 00007f5c994ade99
[   64.312334] RDX: 00000000000000a0 RSI: 00000000200001c0 RDI: 0000000000000015
[   64.315783] RBP: 00007f5c99b97ec0 R08: 0000000000000000 R09: 0000000000000000
[   64.318365] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5c99b97fc0
[   64.320980] R13: 0000000000000000 R14: 00007fff660e1c40 R15: 00007f5c99b989c0
[   64.323515] Code: e8 e8 79 08 ff 4c 89 ff 45 0f b6 a7 b8 01 00 00 e8 68 7c 08 ff 49 8b 1f 4d 89 e5 49 c1 e4 04 48 8
[   64.330753] RIP: rdma_join_multicast+0x26e/0x12c0 RSP: ffff8801c8207860
[   64.332979] CR2: 00000000000000b0
[   64.335550] ---[ end trace 0c00c17a408849c1 ]---

Reported-by: <syzbot+e6aba77967bd72cbc9d6@syzkaller.appspotmail.com>
Fixes: c8f6a362bf ("RDMA/cma: Add multicast communication support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:22:55 -04:00
Jerry (Fangzhi) Zuo
2a54bd6e08 drm/amd/display: Use actual TG instance instead of pipe instance
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:36 -05:00
Harry Wentland
d1aaad05d0 drm/amd/display: Check for HW blocks in HWSS, rather than DC core for cursor
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:36 -05:00
Oak Zeng
3760f76cbe drm/amdgpu: Move IH clientid defs to separate file
This is preparation for sharing client ID definitions
between amdgpu and amdkfd

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:35 -05:00
Dmytro Laktyushkin
e36ec85998 drm/amd/display: update dce_calcs to latest version
Bw spreadsheet was updated while dce_calcs was not

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:35 -05:00
Yongqiang Sun
45bb8dd696 drm/amd/display: Set disp clk in a safe way to avoid over high dpp clk. (v2)
Increase clock, if current dpp div is 0 and request dpp div is 1, request clk is
higher than maximum dpp clk as per dpm table.
	set dispclk to the value of maximum supported dpp clk
	set div to 1
	set dispclk to request value.
Decrease clock, currrent dpp div is 1 and request dpp div is 0, current clk is
higher than maximum dpp clk as per dpm table.
	set dispclk to the value of maximum supported dpp clk
	set div to 0
	set dispclk to request value.

v2: squash in !DCN build fix

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:34 -05:00
Samson Tam
5231f5d112 drm/amd/display: add support for regkey "LCDFreeSyncDefault"
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:34 -05:00
Shirish S
df534fff0d drm/amd/display: Correct the plane enumeration order (v2)
The order of planes is given by the order they are enumerated
by kms.
Planes with a higher ID appears above planes with a lower ID.

Currently the planes are enumerated in the wrong order,
putting the nv12 only plane after the two RGBA planes.

This patch corrects the plane enumeration order such that all
the overlay planes are initialized first then the primary planes.

Due to this change in order the dc_add_plane_to_context() shall
receive the planes in reverse order hence this patch reverses
the parsing of planes in DM side itself.

v2: drop local reverse macro for upstream

Signed-off-by: Shirish S <shirish.s@amd.com>
Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:16:34 -05:00
Arnd Bergmann
baa00fcde4 RDMA/i40iw: include linux/irq.h
We get a build failure on ARM unless the header is included explicitly:

drivers/infiniband/hw/i40iw/i40iw_verbs.c: In function 'i40iw_get_vector_affinity':
drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: implicit declaration of function 'irq_get_affinity_mask'; did you mean 'irq_create_affinity_masks'? [-Werror=implicit-function-declaration]
  return irq_get_affinity_mask(msix_vec->irq);
         ^~~~~~~~~~~~~~~~~~~~~
         irq_create_affinity_masks
drivers/infiniband/hw/i40iw/i40iw_verbs.c:2747:9: error: returning 'int' from a function with return type 'const struct cpumask *' makes pointer from integer without a cast [-Werror=int-conversion]
  return irq_get_affinity_mask(msix_vec->irq);

Fixes: 7e952b19eb ("i40iw: Implement get_vector_affinity API")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:09:56 -04:00
Vitaly Prosyak
9eee21376b drm/amd/display: Fix handling of linear transfer function
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:48 -05:00
Tony Cheng
3f7194bce2 drm/amd/display: dal 3.1.38
Signed-off-by: Tony Cheng <tony.cheng@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:47 -05:00
Anthony Koo
64ed6a2eba drm/amd/display: Add variable refresh rate parameters to DC structures
Time stamping will be part of surface, and will be updated when address is flipped.
FreeSync parameters will be attached to stream, as it adjusts the timing dynamically.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:47 -05:00
Anthony Koo
a3e1737ed6 drm/amd/display: Implement stats logging
Stats will be used for debug purposes

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:47 -05:00
Eric Yang
e18d308673 drm/amd/display: early return if not in vga mode in disable_vga
The work around for hw bug causes S3 resume failure. Don't execute
disable vga logic if not in vga mode.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:46 -05:00
Mikita Lipski
d54ee94603 drm/amd/display: Enable backlight support for pre-DCE11 ASICs
Initializing ABM and DMCU modules for dce 80/81/83/100 as in DCE110
Adding constructors and destructors for each module.
Adding register list for DMCU in dce80 as some registers are missing
in dce80 from the basic list. DMCU is never used, so it would not have
any functional impact.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:46 -05:00
Krunoslav Kovac
a4056c2a63 drm/amd/display: use HW hdr mult for brightness boost
In MPO scenario when playing SDR clip in HDR desktop mode, Win is
boosting desktop and requests driver to boost MPO. But driver boosting
is currently done in regamma which is stream property and thus shared
between grph and video.

Redesigning the boosting in RV: use CM_HDR_MULT register which was added
for this scenario. It also has the benefit that it can be done in HIRQL.

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:46 -05:00
Bhawanpreet Lakha
713d451d2d drm/amd/display: Use MACROS instead of dm_logger
Use DC_LOGGER macro for logs.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:45 -05:00
Bhawanpreet Lakha
f0ba51e83a drm/amd/display: Move DTRACE and dml_print defines
These MACROS are only being used by a few files but
gets pulled in by dc.h

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:45 -05:00
Yongqiang Sun
8e437c7991 drm/amd/display: Modified set bandwidth sequence.
This change make sure bandwidth is set properly.
For increase bandwidth, set bandwidth before backend
and front end programming.
For decrease bandwidth, set bandwidth after.
To avoid smu hang when reboot and dpms due to 0 disp clk,
keep min disp clock as 100Mhz.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:44 -05:00
Eric Yang
d03f3f6304 drm/amd/display: fix check condition for edp power control
Per discussion with VBIOS team, the orginal check is not correct in
all cases on latest VBIOS. Additional check is needed. This change should
maintain old behaviour on older VBIOS.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:44 -05:00
Bhawanpreet Lakha
90e3103e19 drm/amd/display: Fix takover from VGA mode
HW Engineer's Notes:
 During switch from vga->extended, if we set the VGA_TEST_ENABLE and then
 hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly.
 Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset
 VGA_TEST_ENABLE, to leave it in the same state as before.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:44 -05:00
Jerry (Fangzhi) Zuo
316178f072 drm/amd/display: Allow passing of syspll id to get_smu_clock_info
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:43 -05:00
Yongqiang Sun
623a7e96cd drm/amd/display: Remove 300Mhz minimum disp clk limit.
300Mhz disp clk limit was a workaround that was fixed in SMU and is no
longer needed.

Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:43 -05:00
Leo (Sunpeng) Li
5e3e341cee drm/amd/display: Convert CTM to 2's complement
DRM's documentation for the color transform matrix does not specify
whether the values are in signed-magnitude, or 2's complement.
Therefore, it was assumed to use 2's complement.

However, existing usermode implementations use signed-magnitude.
Therefore, conform to existing standards, and convert to 2's complement
internally.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:43 -05:00
SivapiriyanKumarasamy
a7596f25db drm/amd/display: Varibright add null check
Add null check for stream update

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:42 -05:00
SivapiriyanKumarasamy
9aef1a3170 drm/amd/display: Varibright fix bug and review comments
Fix bug and make changes from review 132656

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:42 -05:00
SivapiriyanKumarasamy
aa5a577730 drm/amd/display: Vari-bright looks disabled near end of MM14
Avoid hanging DMCU by setting abm level only when OTG unblanked

Signed-off-by: SivapiriyanKumarasamy <sivapiriyan.kumarasamy@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:41 -05:00
Leo (Sunpeng) Li
d5400aab15 drm/amd/display: Use correct error codes
Should return -ENOMEM when allocation fails.
Also, just return the error code instead of using a variable.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:41 -05:00
Leo (Sunpeng) Li
8c45c5db84 drm/amd/display: Fix memleaks when atomic check fails.
While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.

Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.

Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:41 -05:00
Harry Wentland
d179664a2a drm/amdgpu: Remove some unused elements from amdgpu_connector struct
They were used by amdgpu_dm at some point but since it has its own
amdgpu_dm_connector now these aren't needed anymore.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:40 -05:00
Alex Deucher
a59b3c80fd drm/amdgpu: save/restore backlight level in legacy dce code
Save/restore the backlight level scratch register in S3/S4 so the
backlight level comes back at the previously requested level.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047
Fixes: 4ec6ecf48c (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling)
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:40 -05:00
Christian König
0660b58c90 drm/radeon: fix prime teardown order
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:40 -05:00
Christian König
7f8fb91965 drm/amdgpu: fix prime teardown order
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:39 -05:00
Christian König
eab3de23a1 drm/amdgpu: explicit give BO type to amdgpu_bo_create
Drop the "kernel" and sg parameter and give the BO type to create
explicit to amdgpu_bo_create instead of figuring it out from the
parameters.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 15:08:24 -05:00
Ilya Lesokhin
c44ef998f2 IB/mlx5: Maintain a single emergency page
The mlx5 driver needs to be able to issue invalidation to ODP MRs
even if it cannot allocate memory. To this end it preallocates
emergency pages to use when the situation arises.

This flow should be extremely rare enough, that we don't need
to worry about contention and therefore a single emergency page
is good enough.

Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:05:16 -04:00
Daniel Jurgens
65edd0e758 IB/mlx5: Only synchronize RCU once when removing mkeys
Instead synchronizing RCU in a loop when removing mkeys in a batch do it
once at the end before freeing them. The result is only waiting for one
RCU grace period instead of many serially.

Signed-off-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:05:16 -04:00
Mark Bloch
72f7cc09b1 IB/mlx5: Expose more priorities for bypass namespace
BYPASS namespace is used by the RDMA side to insert flow rules into
the vport RX flow tables. Currently only 8 priorities are exposed,
increase this to 16 to allow more flexibility. This change will also
cause the BYPASS namespace to use 32 levels (as apposed to 16 today) of
flow tables, 16 levels for regular rules and 16 for don't trap rules.

Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 16:05:16 -04:00
Linus Torvalds
274a1ff070 platform-drivers-x86 for v4.16-7
DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it depends
 on DCDBAS, update the Kconfig accordingly. Correct the driver init order
 to ensure that the driver dependencies are met, avoiding race conditions
 resulting in boot failure on certain systems when the drivers are
 built-in.
 
 The following is an automated git shortlog grouped by driver:
 
 dell-smbios and related drivers:
  - Fix dell driver init order
  - Resolve dependency error on ACPI_WMI
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJaqWWlAAoJEKbMaAwKp364y2gH/RUWyV2snZKLQNSzi9w5xdxb
 G99n0Hsy5ugUcnqDx6jK7Hgy0Lm7D7Gs4+ePlY0AuPZN99ywTNfUQkr6Tbdns/wv
 CKJtToA6DRh/fbvHDbNMsFEiv9a/Xdf21925K73KWqTN6RK/dWZVffafvRh0UmQe
 ffGYccVNdxsOI4e8qNzk2++3QfxSsH97nDHDFDVA0lRWdKljK3DJTSzeUOhoRErf
 YsyjUydVcnmlLmaoDt6xNAJIYcSqUqKwvIgX20hbeBYRBDLLZyjSpDjSW0F3NT2H
 LZKq3hBoVzyp9ta3uZEwIZIdBk+5prR44ugFZZjOVsr7xvaMcKczerDPQEw9lgo=
 =WjAI
 -----END PGP SIGNATURE-----

Merge tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform drives fixes from Darren Hart:

 - DELL_SMBIOS conditionally depends on ACPI_WMI in the same way it
   depends on DCDBAS, update the Kconfig accordingly.

 - fix the dell driver init order to ensure that the driver dependencies
   are met, avoiding race conditions resulting in boot failure on
   certain systems when the drivers are built-in.

* tag 'platform-drivers-x86-v4.16-7' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: Fix dell driver init order
  platform/x86: dell-smbios: Resolve dependency error on ACPI_WMI
2018-03-14 13:01:14 -07:00
Tatyana Nikolova
9dea9a2ff6 RDMA/core: Do not use invalid destination in determining port reuse
cma_port_is_unique() allows local port reuse if the quad (source
address and port, destination address and port) for this connection
is unique. However, if the destination info is zero or unspecified, it
can't make a correct decision but still allows port reuse. For example,
sometimes rdma_bind_addr() is called with unspecified destination and
reusing the port can lead to creating a connection with a duplicate quad,
after the destination is resolved. The issue manifests when MPI scale-up
tests hang after the duplicate quad is used.

Set the destination address family and add checks for zero destination
address and port to prevent source port reuse based on invalid destination.

Fixes: 19b752a19d ("IB/cma: Allow port reuse for rdma_id")
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 15:57:05 -04:00
Bart Van Assche
c62adb7def IB/srp: Fix IPv6 address parsing
Split IPv6 addresses at the colon that separates the IPv6 address
and the port number instead of at a colon in the middle of the IPv6
address. Check whether the IPv6 address is surrounded with square
brackets.

Fixes: 19f313438c ("IB/srp: Add RDMA/CM support")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-03-14 15:54:07 -04:00
Steffen Maier
8c5c147339 dm mpath: fix passing integrity data
After v4.12 commit e2460f2a4b ("dm: mark targets that pass integrity
data"), dm-multipath, e.g. on DIF+DIX SCSI disk paths, does not support
block integrity any more. So add it to the whitelist.

This is also a pre-requisite to use block integrity with other dm layer(s)
on top of multipath, such as kpartx partitions (dm-linear) or LVM.

Also, bump target version to reflect this fix.

Fixes: e2460f2a4b ("dm: mark targets that pass integrity data")
Cc: <stable@vger.kernel.org> #4.12+
Bisected-by: Fedor Loshakov <loshakov@linux.vnet.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-14 15:39:33 -04:00
Christian König
e3364dfc6a drm/amdgpu: initial validate the prime BOs into the CPU domain
Just set the GTT domain as mandatory, so that the BO is validated into
it on first use. This allows us to setup the sg table later on.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 14:38:28 -05:00
Christian König
82dee24189 drm/amdgpu: drop the backing store when DMA-buf imports are evicted
Instead of moving this to the SYSTEM domain just drop the backing store
and let the resulting allocation be freed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 14:38:28 -05:00
Christian König
536bbeba9b drm/ttm: move initializing ttm->sg into ttm_tt_init_fields
Better to set this with all other fields as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 14:38:28 -05:00
Christian König
dde5da2379 drm/ttm: add bo as parameter to the ttm_tt_create callback
Instead of calculating the size in bytes just to recalculate the number
of pages from it pass the BO directly to the function.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14 14:38:27 -05:00