Step 5/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted a few more uses in comments/messages as well. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ariel Miculas <amiculas@cisco.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-6-leitao@debian.org
Step 4/10 of the namespace unification of CPU mitigations related Kconfig options.
[ mingo: Converted new uses that got added since the series was posted. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-5-leitao@debian.org
So the CPU mitigations Kconfig entries - there's 10 meanwhile - are named
in a historically idiosyncratic and hence rather inconsistent fashion
and have become hard to relate with each other over the years:
https://lore.kernel.org/lkml/20231011044252.42bplzjsam3qsasz@treble/
When they were introduced we never expected that we'd eventually have
about a dozen of them, and that more organization would be useful,
especially for Linux distributions that want to enable them in an
informed fashion, and want to make sure all mitigations are configured
as expected.
For example, the current CONFIG_SPECULATION_MITIGATIONS namespace is only
halfway populated, where some mitigations have entries in Kconfig, and
they could be modified, while others mitigations do not have Kconfig entries,
and can not be controlled at build time.
Fine-grained control over these Kconfig entries can help in a number of ways:
1) Users can choose and pick only mitigations that are important for
their workloads.
2) Users and developers can choose to disable mitigations that mangle
the assembly code generation, making it hard to read.
3) Separate Kconfigs for just source code readability,
so that we see *which* butt-ugly piece of crap code is for what
reason...
In most cases, if a mitigation is disabled at compilation time, it
can still be enabled at runtime using kernel command line arguments.
This is the first patch of an initial series that renames various
mitigation related Kconfig options, unifying them under a single
CONFIG_MITIGATION_* namespace:
CONFIG_GDS_FORCE_MITIGATION => CONFIG_MITIGATION_GDS_FORCE
CONFIG_CPU_IBPB_ENTRY => CONFIG_MITIGATION_IBPB_ENTRY
CONFIG_CALL_DEPTH_TRACKING => CONFIG_MITIGATION_CALL_DEPTH_TRACKING
CONFIG_PAGE_TABLE_ISOLATION => CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
CONFIG_RETPOLINE => CONFIG_MITIGATION_RETPOLINE
CONFIG_SLS => CONFIG_MITIGATION_SLS
CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
Implement step 1/10 of the namespace unification of CPU mitigations related
Kconfig options and rename CONFIG_GDS_FORCE_MITIGATION to
CONFIG_MITIGATION_GDS_FORCE.
[ mingo: Rewrote changelog for clarity. ]
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20231121160740.1249350-2-leitao@debian.org
As the last part of support for legacy layout of configuration ROM, this
commit traverses vendor directory as well as root directory when
constructing modalias for unit device. The change brings loss of backward
compatibility since it can fill model field ('mo') which is 0 at current
implementation in the case. However, we can be optimistic against
regression for unit drivers in kernel, due to some points:
1. ALSA drivers for audio and music units use the model fields to match
device, however all of supported devices does not have such legacy
layout.
2. the other unit drivers (e.g. sbp2) does not use the model field to
match device.
The rest of concern is user space application. The most of applications
just take care of node device and does not use the modalias of unit
device, thus the change does not affect to them. But systemd project is
known to get affects from the change since it includes hwdb to take udev
to configure fw character device conveniently. I have a plan to work for
systemd so that the access permission of character device could be kept
across the change.
Suggested-by: Adam Goldman <adamg@pobox.com>
Link: https://lore.kernel.org/r/20231221134849.603857-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reduce the need for rebuilds when drm_edid.h is modified by including it
only where needed.
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Yongqin Liu <yongqin.liu@linaro.org>
Cc: John Stultz <jstultz@google.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-2-jani.nikula@intel.com
Including drm_edid.h from nouveau_connector.h causes the rebuild of 15
files when drm_edid.h is modified, while there are only a few files that
actually need to include drm_edid.h.
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104201632.1100753-1-jani.nikula@intel.com
Use correct helper for getting max DSC bpc supported by the source.
Fixes: 1c56e9a398 ("drm/i915/dp: Get optimal link config to have best compressed bpp")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213091632.431557-3-ankit.k.nautiyal@intel.com
(cherry picked from commit cd7b0b2dd3)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_wakeref_t is supposed to be a mostly opaque cookie to its
users. It should only be checked for being non-zero and set to
zero. Debug logging its actual value is meaningless. Switch to just
debug logging whether the async_put_wakeref is non-zero.
The issue dates back to much earlier than
commit b49e894c3f ("drm/i915: Replace custom intel runtime_pm tracker
with ref_tracker library"), but this is the one that brought about a
build failure due to the printf format.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240102111222.2db11208@canb.auug.org.au
Fixes: b49e894c3f ("drm/i915: Replace custom intel runtime_pm tracker with ref_tracker library")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240104164600.783371-1-jani.nikula@intel.com
(cherry picked from commit de06b42edc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
MST connectors don't have a static attached encoder, as their encoder
can change depending on the pipe they use; so the encoder for an MST
connector can't be retrieved using intel_dp_attached_encoder() (which
may return NULL for MST). Most of the PSR debugfs entries depend on a
static connector -> encoder mapping which is only true for eDP and SST
DP connectors and not for MST. These debugfs entries were enabled for
MST connectors as well recently to provide PR information for them, but
handling MST connectors needs more changes.
Fix this by not adding for now the PSR entries on MST connectors. To
make things more uniform add the entries for SST connectors on all
platforms, not just on platforms supporting DP2.0.
v2:
- Keep adding the entries for SST connectors. (Jouni)
- Add a TODO: comment for MST support.
Fixes: ef75c25e8f ("drm/i915/panelreplay: Debugfs support for panel replay")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9850
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240103152609.2434100-1-imre.deak@intel.com
(cherry picked from commit 9b0b61c5bc)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Add pll selection check for C20 as well as
clock state verification0. We have been relying
on sw state to select A or B pll's. This is incorrect
as the hw might see this selection differently. This
patch fixes this shortcoming by reading pll selection
for both sw and hw states and compares if these two
selections match.
Fixes: 59be90248b ("drm/i915/mtl: C20 state verification")
v2: reword commit message and include fix to a
original commit (Imre)
Compare pll selection (Jani)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240102115741.118525-2-mika.kahola@intel.com
(cherry picked from commit f4304beadd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Adds a driver for a mini gamepad that communicates over i2c, the gamepad
has bidirectional thumb stick input and six buttons.
The gamepad chip utilizes the open framework from Adafruit called 'Seesaw'
to transmit the ADC data for the joystick and digital pin state for the
buttons. I have only implemented the functionality required to receive the
thumb stick and button state.
Steps in reading the gamepad state over i2c:
1. Reset the registers
2. Set the pin mode of the pins specified by the `BUTTON_MASK` to input
`BUTTON_MASK`: A bit-map for the six digital pins internally
connected to the joystick buttons.
3. Enable internal pullup resistors for the `BUTTON_MASK`
4. Bulk set the pin state HIGH for `BUTTON_MASK`
5. Poll the device for button and joystick state done by:
`seesaw_read_data(struct i2c_client *client, struct seesaw_data *data)`
Product page:
https://www.adafruit.com/product/5743
Arduino driver:
https://github.com/adafruit/Adafruit_Seesaw
Driver tested on RPi Zero 2W
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20240106015111.882325-2-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adds bindings for the Adafruit Seesaw Gamepad.
The gamepad functions as an i2c device with the default address of 0x50
and has an IRQ pin that can be enabled in the driver to allow for a rising
edge trigger on each button press or joystick movement.
Product page:
https://www.adafruit.com/product/5743
Arduino driver:
https://github.com/adafruit/Adafruit_Seesaw
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Anshul Dalal <anshulusr@gmail.com>
Link: https://lore.kernel.org/r/20240106015111.882325-1-anshulusr@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
DO NOT access the underlying struct page of an sg table exported
by DMA-buf in dmabuf_imp_to_refs(), this is not allowed.
Please see drivers/dma-buf/dma-buf.c:mangle_sg_table() for details.
Fortunately, here (for special Xen device) we can avoid using
pages and calculate gfns directly from dma addresses provided by
the sg table.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Link: https://lore.kernel.org/r/20240107103426.2038075-1-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
DCACHE_WORD_ACCESS uses the word-at-a-time API for optimised string
comparisons in the vfs layer.
This patch implements support for load_unaligned_zeropad in much the
same way as has been done for arm64.
Here is the test program and step:
$ cat tt.c
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#define ITERATIONS 1000000
#define PATH "123456781234567812345678123456781"
int main(void)
{
unsigned long i;
struct stat buf;
for (i = 0; i < ITERATIONS; i++)
stat(PATH, &buf);
return 0;
}
$ gcc -O2 tt.c
$ touch 123456781234567812345678123456781
$ time ./a.out
Per my test on T-HEAD C910 platforms, the above test performance is
improved by about 7.5%.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20231225044207.3821-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Some riscv implementations such as T-HEAD's C906, C908, C910 and C920
support efficient unaligned access, for performance reason we want
to enable HAVE_EFFICIENT_UNALIGNED_ACCESS on these platforms. To
avoid performance regressions on other non efficient unaligned access
platforms, HAVE_EFFICIENT_UNALIGNED_ACCESS can't be globally selected.
To solve this problem, runtime code patching based on the detected
speed is a good solution. But that's not easy, it involves lots of
work to modify vairous subsystems such as net, mm, lib and so on.
This can be done step by step.
So let's take an easier solution: add support to efficient unaligned
access and hide the support under NONPORTABLE.
Now let's introduce RISCV_EFFICIENT_UNALIGNED_ACCESS which depends on
NONPORTABLE, if users know during config time that the kernel will be
only run on those efficient unaligned access hw platforms, they can
enable it. Obviously, generic unified kernel Image shouldn't enable it.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20231225044207.3821-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Clément Léger <cleger@rivosinc.com> says:
This series add support for a few more extensions that are present in
the RVA22U64/RVA23U64 (either mandatory or optional) and that are useful
for userspace:
- Zicond
- Zacas
- Ztso
Series currently based on riscv/for-next.
* b4-shazam-lts:
riscv: hwprobe: export Zicond extension
riscv: hwprobe: export Zacas ISA extension
riscv: add ISA extension parsing for Zacas
dt-bindings: riscv: add Zacas ISA extension description
riscv: hwprobe: export Ztso ISA extension
riscv: add ISA extension parsing for Ztso
Link: https://lore.kernel.org/r/20231220155723.684081-1-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add description for the Zacas ISA extension which was ratified recently.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231220155723.684081-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add support to parse the Ztso string in the riscv,isa string. The
bindings already supports it but not the ISA parsing code.
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Link: https://lore.kernel.org/r/20231220155723.684081-2-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
asm-generic/export.h is a wrapper for linux/export.h, with explicit request
to use linux/export.h directly.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20231214191922.GQ1674809@ZenIV
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Frederik Haxel <haxel@fzi.de> says:
XIP boot seems to be broken for some time now. A likely reason why no one
seems to have noticed this is that XIP is more difficult to test, as it is
currently not easily testable with QEMU.
These patches fix the XIP boot and allow an XIP build without BUILTIN_DTB,
which in turn makes it easier to test an image with the QEMU virt machine.
* b4-shazam-merge:
riscv: Allow disabling of BUILTIN_DTB for XIP
riscv: Fixed wrong register in XIP_FIXUP_FLASH_OFFSET macro
riscv: Make XIP bootable again
Link: https://lore.kernel.org/r/20231212130116.848530-1-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
I don't usually merge these in, but I missed sending a PR due to the
holidays.
* palmer/fixes:
riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC
riscv: Fix module_alloc() that did not reset the linear mapping permissions
riscv: Fix wrong usage of lm_alias() when splitting a huge linear mapping
riscv: Check if the code to patch lies in the exit section
riscv: errata: andes: Probe for IOCP only once in boot stage
riscv: Fix SMP when shadow call stacks are enabled
dt-bindings: perf: riscv,pmu: drop unneeded quotes
riscv: fix misaligned access handling of C.SWSP and C.SDSP
RISC-V: hwprobe: Always use u64 for extension bits
Support rv32 ULEB128 test
riscv: Correct type casting in module loading
riscv: Safely remove entries from relocation list
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The save_v_state() is technically sending a __user pointer through
__put_user() and thus is generating a sparse warning so force the
value to be "void *" to fix:
arch/riscv/kernel/signal.c:94:16: warning: incorrect type in initializer (different address spaces)
arch/riscv/kernel/signal.c:94:16: expected void *__val
arch/riscv/kernel/signal.c:94:16: got void [noderef] __user *[assigned] datap
Fixes: 8ee0b41898 ("riscv: signal: Add sigcontext save/restore for vector")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20231123142708.261733-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The instruction reading code can read from either user or kernel addresses
and thus the use of __user on pointers to instructions depends on which
context. Fix a few sparse warnings by using __user for user-accesses and
remove it when not.
Fixes:
arch/riscv/kernel/traps_misaligned.c:361:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:373:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:381:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:322:24: warning: incorrect type in initializer (different address spaces)
arch/riscv/kernel/traps_misaligned.c:322:24: expected unsigned char const [noderef] __user *__gu_ptr
arch/riscv/kernel/traps_misaligned.c:322:24: got unsigned char const [usertype] *addr
arch/riscv/kernel/traps_misaligned.c:361:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:373:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:381:21: warning: dereference of noderef expression
arch/riscv/kernel/traps_misaligned.c:332:24: warning: incorrect type in initializer (different address spaces)
arch/riscv/kernel/traps_misaligned.c:332:24: expected unsigned char [noderef] __user *__gu_ptr
arch/riscv/kernel/traps_misaligned.c:332:24: got unsigned char [usertype] *addr
Fixes: 7c83232161 ("riscv: add support for misaligned trap handling in S-mode")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20231123141617.259591-1-ben.dooks@codethink.co.uk
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As said in the help of ARCH_WANTS_NO_INSTR entry in arch/Kconfig:
"An architecture should select this if the noinstr macro is being used on
functions to denote that the toolchain should avoid instrumenting such
functions and is required for correctness."
Select ARCH_WANTS_NO_INSTR for correctness.
PS: The reason we didn't find any issue so far is that the
CC_HAS_NO_PROFILE_FN_ATTR is true.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20231123142223.1787-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Samuel Holland <samuel.holland@sifive.com> says:
This series cleans up some duplicated and dead code around the RISC-V
CPU operations, that was copied from arm64 but is not needed here. The
result is a bit of memory savings and removal of a few SBI calls during
boot, with no functional change.
* b4-shazam-merge:
riscv: Use the same CPU operations for all CPUs
riscv: Remove unused members from struct cpu_operations
riscv: Deduplicate code in setup_smp()
Link: https://lore.kernel.org/r/20231121234736.3489608-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This file is not used since commit 72f045d19f ("riscv: Fixup
difference with defconfig"), where it was replaced by the
32-bit.config fragment. Delete the old file to avoid any confusion.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231121225320.3430550-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Andrew Jones <ajones@ventanamicro.com> says:
This series introduces a flag for the hwprobe syscall which effectively
reverses its behavior from getting the values of keys for a set of cpus
to getting the cpus for a set of key-value pairs.
* b4-shazam-merge:
RISC-V: selftests: Add which-cpus hwprobe test
RISC-V: hwprobe: Introduce which-cpus flag
RISC-V: Move the hwprobe syscall to its own file
RISC-V: hwprobe: Clarify cpus size parameter
Link: https://lore.kernel.org/r/20231122164700.127954-6-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It's been 11 years since the ring_buffer_size() function was updated to
use the nr_pages from the buffer->buffers[cpu] structure instead of using
the buffer->nr_pages that no longer exists.
The comment in the code is more of what a change log should have and is
pretty much useless for development. It's saying how things worked back in
2012 that bares no purpose on today's code. Remove it.
Link: https://lore.kernel.org/linux-trace-kernel/84d3b41a72bd43dbb9d44921ef535c92@AcuMS.aculab.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231220081028.7cd7e8e2@gandalf.local.home
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This enables, among other things, testing with the QEMU virt machine.
To build an XIP kernel for the QEMU virt machine, configure the
the kernel as desired and apply the following configuration
```
CONFIG_NONPORTABLE=y
CONFIG_XIP_KERNEL=y
CONFIG_XIP_PHYS_ADDR=0x20000000
CONFIG_PHYS_RAM_BASE=0x80200000
CONFIG_BUILTIN_DTB=n
```
Since the QEMU virt flash memory expects a 32 MB file, the built image
must be padded. For example, with
`truncate -s 32M arch/riscv/boot/xipImage`
The kernel can be started using the following command in QEMU (v8+)
```
qemu-system-riscv64 -M virt,pflash0=pflash0 \
-blockdev node-name=pflash0,driver=file,read-only=on,\
filename=arch/riscv/boot/xipImage <optional parameters>
```
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-4-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
During the refactoring, a bug was introduced in the rarly used
XIP_FIXUP_FLASH_OFFSET macro.
Fixes: bee7fbc385 ("RISC-V CPU Idle Support")
Fixes: e7681beba9 ("RISC-V: Split out the XIP fixups into their own file")
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-3-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, the XIP kernel seems to fail to boot due to missing
XIP_FIXUP and a wrong page_offset value. A superfluous XIP_FIXUP
has also been removed.
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-2-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pick up the CPER to CXL driver integration work for v6.8. Some
additional cleanup of cper_estatus_print() messages is needed, but that
is to be handled incrementally.
The kernel thread function ksmbd_conn_handler_loop() invokes
the try_to_freeze() in its loop. But all the kernel threads are
non-freezable by default. So if we want to make a kernel thread to be
freezable, we have to invoke set_freezable() explicitly.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull MD fixes from Song:
"1. Sparse warning since v6.0, by Bart;
2. /proc/mdstat regression since v6.7, by Yu Kuai."
* tag 'md-6.8-20240109' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/raid1: Use blk_opf_t for read and write operations
md: Fix md_seq_ops() regressions
This kselftest update for Linux 6.8-rc1 consists of enhancements
to reporting test results, fixes to root and user run behavior
and fixing ksft_print_msg() calls.
-----BEGIN PGP SIGNATURE-----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=2+oJ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest update from Shuah Khan:
"Enhancements to reporting test results, fixes to root and user run
behavior and fixing ksft_print_msg() calls"
* tag 'linux_kselftest-next-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
tracing/selftests: Add ownership modification tests for eventfs
selftests: sched: Remove initialization to 0 for a static variable
selftests: capabilities: namespace create varies for root and normal user
selftests: prctl: Add prctl test for PR_GET_NAME
kselftest/vDSO: Use ksft_print_msg() rather than printf in vdso_test_abi
kselftest/vDSO: Fix message formatting for clock_id logging
kselftest/vDSO: Make test name reporting for vdso_abi_test tooling friendly
selftests:x86: Fix Format String Warnings in lam.c
selftests/breakpoints: Fix format specifier in ksft_print_msg in step_after_suspend_test.c
selftests:breakpoints: Fix Format String Warning in breakpoint_test