[ Upstream commit 6f93616a73 ]
If a transaction fails the final validation in the commit hook, the table
validation state is changed to NFT_VALIDATE_DO and a replay of the batch is
performed. Every rule insert will then do a graph validation.
This is much slower, but provides better error reporting to the user
because we can point at the rule that introduces the validation issue.
Without this reset the affected table(s) remain in full validation mode,
i.e. on next transaction we start with slow-mode.
This makes the next transaction after a failed incremental update very slow:
# time iptables-restore < /tmp/ruleset
real 0m0.496s [..]
# time iptables -A CALLEE -j CALLER
iptables v1.8.11 (nf_tables): RULE_APPEND failed (Too many links): rule in chain CALLEE
real 0m0.022s [..]
# time iptables-restore < /tmp/ruleset
real 1m22.355s [..]
After this patch, 2nd iptables-restore is back to ~0.5s.
Fixes: 9a32e98506 ("netfilter: nf_tables: don't write table validation state without mutex")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 491f2927ae ]
s_fc_lock can be acquired from inode eviction and thus is
reclaim unsafe. Since the fast commit path holds s_fc_lock while writing
the commit log, allocations under the lock can enter reclaim and invert
the lock order with fs_reclaim. Add ext4_fc_lock()/ext4_fc_unlock()
helpers which acquire s_fc_lock under memalloc_nofs_save()/restore()
context and use them everywhere so allocations under the lock cannot
recurse into filesystem reclaim.
Fixes: 6593714d67 ("ext4: hold s_fc_lock while during fast commit")
Signed-off-by: Li Chen <me@linux.beauty>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20260106120621.440126-1-me@linux.beauty
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1696c8bd0 ]
Seems that there is an assumption that this function should be called
only for netdev interfaces, but it can also be called in suspend, or
from nl80211_netlink_notify (indirectly).
Note that the documentation of NL80211_ATTR_SOCKET_OWNER explicitly
says that NAN interfaces would be destroyed as well in the
nl80211_netlink_notify case.
Fix this by also stopping P2P and NAN.
Fixes: cb3b7d8765 ("cfg80211: add start / stop NAN commands")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260107140430.dab142cbef0b.I290cc47836d56dd7e35012ce06bec36c6da688cd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a14e91b6d ]
Set a 0xff value for i2c reads of an mctp-i2c device. Otherwise reads
will return "val" from the i2c bus driver. For i2c-aspeed and
i2c-npcm7xx that is a stack uninitialised u8.
Tested with "i2ctransfer -y 1 r10@0x34" where 0x34 is a mctp-i2c
instance, now it returns all 0xff.
Fixes: f5b8abf9fc ("mctp i2c: MCTP I2C binding driver")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20260113-mctp-read-fix-v1-1-70c4b59c741c@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae4744e173 ]
The MCTP I2C slave callback did not handle I2C_SLAVE_READ_REQUESTED
events. As a result, i2c read event will trigger repeated reception of
old data, reset rx_pos when a read request is received.
Signed-off-by: Jian Zhang <zhangjian.3032@bytedance.com>
Link: https://patch.msgid.link/20260108101829.1140448-1-zhangjian.3032@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2a14e91b6d ("mctp i2c: initialise event handler read bytes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77449e453d ]
When a filesystem is frozen, quotactl_block() enters a retry loop
waiting for the filesystem to thaw. It acquires s_umount, checks the
freeze state, drops s_umount and uses sb_start_write() - sb_end_write()
pair to wait for the unfreeze.
However, this retry loop can trigger a livelock issue, specifically on
kernels with preemption disabled.
The mechanism is as follows:
1. freeze_super() sets SB_FREEZE_WRITE and calls sb_wait_write().
2. sb_wait_write() calls percpu_down_write(), which initiates
synchronize_rcu().
3. Simultaneously, quotactl_block() spins in its retry loop, immediately
executing the sb_start_write() - sb_end_write() pair.
4. Because the kernel is non-preemptible and the loop contains no
scheduling points, quotactl_block() never yields the CPU. This
prevents that CPU from reaching an RCU quiescent state.
5. synchronize_rcu() in the freezer thread waits indefinitely for the
quotactl_block() CPU to report a quiescent state.
6. quotactl_block() spins indefinitely waiting for the freezer to
advance, which it cannot do as it is blocked on the RCU sync.
This results in a hang of the freezer process and 100% CPU usage by the
quota process.
While this can occur intermittently on multi-core systems, it is
reliably reproducing on a node with the following script, running both
the freezer and the quota toggle on the same CPU:
# mkfs.ext4 -O quota /dev/sda 2g && mkdir a_mount
# mount /dev/sda -o quota,usrquota,grpquota a_mount
# taskset -c 3 bash -c "while true; do xfs_freeze -f a_mount; \
xfs_freeze -u a_mount; done" &
# taskset -c 3 bash -c "while true; do quotaon a_mount; \
quotaoff a_mount; done" &
Adding cond_resched() to the retry loop fixes the issue. It acts as an
RCU quiescent state, allowing synchronize_rcu() in percpu_down_write()
to complete.
Fixes: 576215cffd ("fs: Drop wait_unfrozen wait queue")
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
Link: https://patch.msgid.link/20260115213103.1089129-1-abhishekbapat@google.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e62102ac9b ]
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1
Fixes: 32f7b19668 ("wifi: ath12k: support MLO as well if single_chip_mlo_support flag is set")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20251103-ath12-primary-link-wow-v1-1-3cf523dc09f0@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83014d82a1 ]
When mapping a p2pdma page the page reference count is initialised to 1
prior to calling vm_insert_page(). This is to avoid vm_insert_page()
warning if the page refcount is zero. Prior to setting the page count there
is a check to ensure the page is currently free (ie. has a zero reference
count).
However vm_insert_page() can fail. In this case the pages are freed back to
the genalloc pool, but that does not reset the page refcount. So a future
allocation of the same page will see the elevated page refcount from the
previous set_page_count() call triggering the VM_WARN_ON_ONCE_PAGE checking
that the page is free.
Fix this by resetting the page refcount to zero using set_page_count().
Note that put_page() is not used because that would result in freeing the
page twice due to implicitly calling p2pdma_folio_free().
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Balbir Singh <balbirs@nvidia.com>
Link: https://patch.msgid.link/20260112005440.998543-1-apopple@nvidia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62171369cf ]
In pcie_ptm_create_debugfs(), if devm_kasprintf() fails after successfully
allocating ptm_debugfs with kzalloc(), the function returns without freeing
the allocated memory, resulting in a memory leak.
Free ptm_debugfs before returning in the devm_kasprintf() error path and in
pcie_ptm_destroy_debugfs().
Fixes: 132833405e ("PCI: Add debugfs support for exposing PTM context")
Signed-off-by: Aadityarangan Shridhar Iyengar <adiyenga@cisco.com>
[bhelgaas: squash additional fix from Mani:
https://lore.kernel.org/r/pdp4xc4d5ee3e547mmdro5riui3mclduqdl7j6iclfbozo2a4c@7m3qdm6yrhuv]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260111163650.33168-1-adiyenga@cisco.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9f5a55b70 ]
The functon dm_blk_report_zones reads md->zone_revalidate_map, however it
may change while the function is running. Use READ_ONCE.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24c405fdbe ]
The function dm_blk_report_zones tests if the device is suspended with
the "dm_suspended_md" call. However, this function is called without
holding any locks, so the device may be suspended just after it.
Move the call to dm_suspended_md after dm_get_live_table, so that the
device can't be suspended after the suspended state was tested.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 37f53a2c60 ("dm: fix dm_blk_report_zones")
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01464a3fdf ]
pcie_port_probe_service() unconditionally calls get_device() (unless it
fails). So drop that reference also unconditionally as it's fine for a
PCIe driver to not have a remove callback.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/e1c68c3b3f1af8427e98ca5e2c79f8bf0ebe2ce4.1764688034.git.u.kleine-koenig@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 613f3255a3 ]
Sophgo 2044 Root Ports advertise L0 and L1 capabilities without supporting
them. Since commit f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM
states for devicetree platforms") force enabled ASPM on all device tree
platforms, the issue became evident and the SG2044 Root Port started
breaking.
Hence, disable the L0s and L1 capabilities in the LINKCAP register for the
SG2044 Root Ports, so that these states won't get enabled.
Fixes: 467d9c0348 ("PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
[mani: reworded description and corrected fixes tag]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Link: https://patch.msgid.link/20260109040756.731169-1-inochiama@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73711730a1 ]
The bit for enabling extended tags is Reserved and Preserved (RsvdP) for
VFs, according to PCIe r7.0 section 7.5.3.4 table 7.21. Hence, bail out
early from pci_configure_extended_tags() if the device is a VF.
Otherwise, we may see incorrect log messages such as:
kernel: pci 0000:af:00.2: enabling Extended Tags
(af:00.2 is a VF)
Fixes: 60db3a4d8c ("PCI: Enable PCIe Extended Tags if supported")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251112095442.1913258-1-haakon.bugge@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb500023a7 ]
Commit b7e2823787 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition.
Fixes: b7e2823787 ("mm/mm_init: move p2pdma page refcount initialisation to p2pdma")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-3-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6220694c52 ]
When vm_insert_page() fails in p2pmem_alloc_mmap(), p2pmem_alloc_mmap()
doesn't invoke percpu_ref_put() to free the per-CPU ref of pgmap acquired
after gen_pool_alloc_owner(), and memunmap_pages() will hang forever when
trying to remove the PCI device.
Fix it by adding the missed percpu_ref_put().
Fixes: 7e9c7ef83d ("PCI/P2PDMA: Allow userspace VMA allocations through sysfs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20251220040446.274991-2-houtao@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4073ea5161 ]
Userspace may fail to connect to certain BSS that were initially
marked as unusable due to regulatory restrictions (use_for = 0,
e.g., 6 GHz power type mismatch). Even after these restrictions
are removed and the BSS becomes usable, connection attempts still
fail.
The issue occurs in cfg80211_update_known_bss() where the use_for
flag is updated using bitwise AND (&=) instead of direct assignment.
Once a BSS is marked with use_for = 0, the AND operation masks out
any subsequent non-zero values, permanently keeping the flag at 0.
This causes __cfg80211_get_bss(), invoked by nl80211_assoc_bss(), to
fail the check "(bss->pub.use_for & use_for) != use_for", thereby
blocking association.
Replace the bitwise AND operation with direct assignment so the use_for
flag accurately reflects the current BSS state.
Fixes: d02a12b8e4 ("wifi: cfg80211: add BSS usage reporting")
Signed-off-by: Huang Chenming <chenming.huang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251209025733.2098456-1-chenming.huang@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d98208450 ]
When transitioning to D3cold, __pci_set_power_state() first transitions to
D3hot. If the device was already in D3hot, this adds excess work:
(a) read/modify/write PMCSR; and
(b) excess delay (pci_dev_d3_sleep()).
For (b), we already performed the necessary delay on the previous D3hot
entry; this was extra noticeable when evaluating runtime PM transition
latency.
Check whether we're already in the target state before continuing.
Note that __pci_set_power_state() already does this same check for other
state transitions, but D3cold is special because __pci_set_power_state()
converts it to D3hot for the purposes of PMCSR.
This seems to be an oversight in commit 0aacdc9574 ("PCI/PM: Clean up
pci_set_low_power_state()").
Fixes: 0aacdc9574 ("PCI/PM: Clean up pci_set_low_power_state()")
Signed-off-by: Brian Norris <briannorris@google.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
[bhelgaas: reverse test to match other "dev->current_state == state" cases]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20251003154008.1.I7a21c240b30062c66471329567a96dceb6274358@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad0c6da5be ]
Fix copy & paste errors by changing the references from 'ntb' to 'vntb'.
Fixes: 4ac8c8e52c ("Documentation: PCI: Add specification for the PCI vNTB function device")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[mani: squashed the patches and fixed more errors]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f42b3c053b ]
In xilinx_pcie_init_irq_domain(), if xilinx_allocate_msi_domains() fails
after pcie->leg_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without cleaning
up the allocated IRQ domain, resulting in a resource leak. In
xilinx_free_msi_domains(), pcie->leg_domain is also neglected.
Add irq_domain_remove() call in the error path to properly release the
IRQ domain before returning the error. Also rename
xilinx_free_msi_domains() to xilinx_free_irq_domains() and add the release
of pcie->leg_domain to it.
Fixes: 313b64c3ae ("PCI: xilinx: Convert to MSI domains")
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251219021615.965-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f0cdcddf8 ]
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e33c1dba2 ]
When MPQ8785 reports VOUT_MODE as VID mode, mpq8785_identify()
configures the driver for direct mode. The subsequent
pmbus_identify_common() check then fails due to a mismatch
between the reported mode and the configured mode, causing
device initialization to fail.
Override the reported VOUT_MODE to direct mode to keep the
driver configuration consistent with the reported mode and
allow successful device initialization.
This does not change how voltages are interpreted, but avoids
a false identification failure caused by mismatched mode
handling.
Fixes: f20b4a9311 ("hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter")
Signed-off-by: Carl Lee <carl.lee@amd.com>
Link: https://lore.kernel.org/r/20260210-dt-bindings-hwmon-pmbus-mpq8785-add-mpq8786-support-v3-1-84636ccfe76f@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bde3e395a ]
This reverts commit 6946c726c3.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix.
Reported-by: Jean Delvare <jdelvare@suse.de>
Closes: https://lore.kernel.org/linux-hwmon/20260121095342.73e723cb@endymion/
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Junrui Luo <moonafterrain@outlook.com>
Fixes: 6946c726c3 ("hwmon: (ibmpex) fix use-after-free in high/low store")
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5af56f30c4 ]
The Makefile for the SPI tools creates an include/linux/spi folder and some
symlinks inside it. After running `make -C spi/tools`, this folder shows up
as untracked in the git status.
Add the above folder to the .gitignore file.
Fixes: f325b73dc4 ("spi: tools: move to tools buildsystem")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260209095001.556495-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fad74b79e ]
There are very few volatile controls in SDCA that are exported
as ALSA controls, typically Detected Mode is the only common
one. However, the current code does not resume the device when
these ALSA controls are accessed, which will result in the
read/write failing.
Add a new wrapper specifically for volatile controls that will do
the required pm_runtime operations before accessing the register.
Fixes: c3ca24e3fc ("ASoC: SDCA: Create ALSA controls from DisCo")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-3-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b6c6b605 ]
Whilst SDCA does specify an Access Mode for each Control, there is not a
1-to-1 mapping between that and ASoC's internal representation. Some
registers require being treated as volatile from the hosts perspective
even in their Access Mode is Read-Write. Add an explicit list of SDCA
controls that should be forced volatile.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20251020155512.353774-10-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 9fad74b79e ("ASoC: SDCA: Handle volatile controls correctly")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b27b57f85f ]
Support for -cn- properties has already been added, however the TODO
comment noting this feature was required was not removed. Remove the
now redundant comment.
Fixes: 50a479527e ("ASoC: SDCA: Add support for -cn- value properties")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260204125944.1134011-2-ckeepax@opensource.cirrus.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 750817a7c4 ]
The driver currently returns an incorrect error code when a chain command
fails. In this case, ERT_CMD_STATE_ERROR is expected to be reported for
failed chain commands.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260203184037.2751889-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56f7db581e ]
During a warm reset flow, the cl->device pointer may be NULL if the
reset occurs while clients are still being enumerated. Accessing
cl->device->reference_count without a NULL check leads to a kernel panic.
This issue was identified during multi-unit warm reboot stress clycles.
Add a defensive NULL check for cl->device to ensure stability under
such intensive testing conditions.
KASAN: null-ptr-deref in range [0000000000000000-0000000000000007]
Workqueue: ish_fw_update_wq fw_reset_work_fn
Call Trace:
ishtp_bus_remove_all_clients+0xbe/0x130 [intel_ishtp]
ishtp_reset_handler+0x85/0x1a0 [intel_ishtp]
fw_reset_work_fn+0x8a/0xc0 [intel_ish_ipc]
Fixes: 3703f53b99 ("HID: intel_ish-hid: ISH Transport layer")
Signed-off-by: Ryan Lin <ryan.lin@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84dd57fb03 ]
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Signed-off-by: Zishun Yi <zishun.yi.dev@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Min Ma <mamin506@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260129171022.68578-1-zishun.yi.dev@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1370241fe ]
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260130003255.2083255-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9162439ad ]
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260128002356.1858122-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ba6286a71 ]
Add writeable_reg callbacks for Tegra210/186 AHUB RX registers so the
flat cache only treats valid RX locations as writable, avoiding holes
in the register map.
Fixes: 16e1bcc2ca ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260123095346.1258556-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8b4cd2dad ]
kvfree_call_rcu() can be called while holding a raw_spinlock_t.
Since __kfree_rcu_sheaf() may acquire a spinlock_t (which becomes a
sleeping lock on PREEMPT_RT) and violate lock nesting rules,
kvfree_call_rcu() bypasses the sheaves layer entirely on PREEMPT_RT.
However, lockdep still complains about acquiring spinlock_t while holding
raw_spinlock_t, even on !PREEMPT_RT where spinlock_t is a spinning lock.
This causes a false lockdep warning [1]:
=============================
[ BUG: Invalid wait context ]
6.19.0-rc6-next-20260120 #21508 Not tainted
-----------------------------
migration/1/23 is trying to lock:
ffff8afd01054e98 (&barn->lock){..-.}-{3:3}, at: barn_get_empty_sheaf+0x1d/0xb0
other info that might help us debug this:
context-{5:5}
3 locks held by migration/1/23:
#0: ffff8afd01fd89a8 (&p->pi_lock){-.-.}-{2:2}, at: __balance_push_cpu_stop+0x3f/0x200
#1: ffffffff9f15c5c8 (rcu_read_lock){....}-{1:3}, at: cpuset_cpus_allowed_fallback+0x27/0x250
#2: ffff8afd1f470be0 ((local_lock_t *)&pcs->lock){+.+.}-{3:3}, at: __kfree_rcu_sheaf+0x52/0x3d0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: migration/1 Not tainted 6.19.0-rc6-next-20260120 #21508 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Stopper: __balance_push_cpu_stop+0x0/0x200 <- balance_push+0x118/0x170
Call Trace:
<TASK>
__dump_stack+0x22/0x30
dump_stack_lvl+0x60/0x80
dump_stack+0x19/0x24
__lock_acquire+0xd3a/0x28e0
? __lock_acquire+0x5a9/0x28e0
? __lock_acquire+0x5a9/0x28e0
? barn_get_empty_sheaf+0x1d/0xb0
lock_acquire+0xc3/0x270
? barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
_raw_spin_lock_irqsave+0x47/0x70
? barn_get_empty_sheaf+0x1d/0xb0
barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
__kfree_rcu_sheaf+0x19f/0x3d0
kvfree_call_rcu+0xaf/0x390
set_cpus_allowed_force+0xc8/0xf0
[...]
</TASK>
This wasn't triggered until sheaves were enabled for all slab caches,
since kfree_rcu() wasn't being called with a raw spinlock held for
caches with sheaves (vma, maple node).
As suggested by Vlastimil Babka, fix this by using a lockdep map with
LD_WAIT_CONFIG wait type to tell lockdep that acquiring spinlock_t is valid
in this case, as those spinlocks won't be used on PREEMPT_RT.
Note that kfree_rcu_sheaf_map should be acquired using _try() variant,
otherwise the acquisition of the lockdep map itself will trigger an invalid
wait context warning.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/linux-mm/c858b9af-2510-448b-9ab3-058f7b80dd42@paulmck-laptop [1]
Fixes: ec66e0d599 ("slab: add sheaf support for batching kfree_rcu() operations")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801a6e61f5 ]
On PTL, the recommendation is to disable DCC(Duty Cycle Control) as
it may cause some regressions due to added latencies. Upcoming GuC
releases will disable DCC on PTL as well, but we need to force it in
KMD so that this behavior is propagated to older kernels.
v2: Update commit message (Rodrigo)
v3: Rebase
v4: Fix typo: s/propagted/propagated
Fixes: 5cdb71d3b0 ("drm/xe/ptl: Add GuC FW definition for PTL")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260124005917.398522-1-vinay.belgaumkar@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 40ee63f5df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0496fc9cdc ]
Commit 8e5d9f916a ("smack: deduplicate xattr setting in
smack_inode_init_security()") introduced xattr_dupval() to simplify setting
the xattrs to be provided by the SMACK LSM on inode creation, in the
smack_inode_init_security().
Unfortunately, moving lsm_get_xattr_slot() caused the SMACK64TRANSMUTE
xattr be added in the array of new xattrs before SMACK64. This causes the
HMAC of xattrs calculated by evm_init_hmac() for new files to diverge from
the one calculated by both evm_calc_hmac_or_hash() and evmctl.
evm_init_hmac() calculates the HMAC of the xattrs of new files based on the
order LSMs provide them, while evm_calc_hmac_or_hash() and evmctl calculate
the HMAC based on an ordered xattrs list.
Fix the issue by making evm_init_hmac() calculate the HMAC of new files
based on the ordered xattrs list too.
Fixes: 8e5d9f916a ("smack: deduplicate xattr setting in smack_inode_init_security()")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40d3ac25c1 ]
If a frame has size of less or equal than one packet size
uvc_alloc_urb_buffers() is unable to allocate memory for it due to a
off-by-one error.
Fix the off-by-one-error and now that we are at it, make sure that
stream->urb_size has always a valid value when we return from the
function, even when an error happens.
Fixes: efdc8a9585 ("V4L/DVB (10295): uvcvideo: Retry URB buffers allocation when the system is low on memory.")
Reported-by: Itay Chamiel <itay.chamiel@q.ai>
Closes: https://lore.kernel.org/linux-media/CANiDSCsSoZf2LsCCoWAUbCg6tJT-ypXR1B85aa6rAdMVYr2iBQ@mail.gmail.com/T/#t
Co-developed-by: Itay Chamiel <itay.chamiel@q.ai>
Signed-off-by: Itay Chamiel <itay.chamiel@q.ai>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Itay Chamiel <itay.chamiel@q.ai>
Link: https://patch.msgid.link/20260114-uvc-alloc-urb-v1-1-cedf3fb66711@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75e7ed52ac ]
The period and duty cycle configurations on J7200 and J784S4 SoCs
does not get reflected after setting them using sysfs nodes.
This is because at the end of ehrpwm_pwm_config function,
the put_sync function is called which resets the hardware.
Hold the PWM controller out of low-power mode during .apply() to
make sure it accepts the writes to its registers.
This renders the calls to pm_runtime_get_sync() and
pm_runtime_put_sync() in ehrpwm_pwm_config() into no-ops, so
these can be dropped.
Fixes: 5f027d9b83 ("pwm: tiehrpwm: Implement .apply() callback")
Signed-off-by: Gokul Praveen <g-praveen@ti.com>
Suggested-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://patch.msgid.link/20260121061134.15466-1-g-praveen@ti.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1adf48853 ]
The 'dev' field in struct fwnode is special and related to device links,
There no driver should use it for printing messages. Fix incorrect use
of private field.
Fixes: affc804c44 ("platform/chrome: cros_typec_switch: Add switch driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260120131413.1697891-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f185076da4 ]
An (admittedly problematic) optimization change in LLVM 20 [1] turns
known division by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior if it is encountered in a control flow
graph, destroying code generation. When compile testing for x86_64,
objtool flags an instance of this optimization triggering in
msm_dp_ctrl_config_msa(), inlined into msm_dp_ctrl_on_stream():
drivers/gpu/drm/msm/msm.o: warning: objtool: msm_dp_ctrl_on_stream(): unexpected end of section .text.msm_dp_ctrl_on_stream
The zero division happens if the else branch in the first if statement
in msm_dp_ctrl_config_msa() is taken because pixel_div is initialized to
zero and it is not possible for LLVM to eliminate the else branch since
rate is still not known after inlining into msm_dp_ctrl_on_stream().
Transform the if statements into a switch statement with a default case
with the existing error print and an early return to avoid the invalid
division. Add a comment to note this helps the compiler, even though the
case is known to be unreachable. With this, pixel_dev's default zero
initialization can be dropped, as it is dead with this change.
Fixes: c943b4948b ("drm/msm/dp: add displayPort driver support")
Link: 37932643ab [1]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601081959.9UVJEOfP-lkp@intel.com/
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/698355/
Link: https://lore.kernel.org/r/20260113-drm-msm-dp_ctrl-avoid-zero-div-v2-1-f1aa67bf6e8e@kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dcec3fc13 ]
Since DPU 8.0 there is a separate register for the second rectangle,
which needs to be programmed with the UBWC config if multirect is being
used. Write pipe's UBWC configuration to the correct register.
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699277/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-3-0987acc0427f@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ead14d4b9 ]
As in all other places, the Highest Bank Bit value should be programmed
into the hardware with the offset of -13. Correct the value written
into the register to prevent unpredictable results.
Fixes: 227d4ce0b0 ("drm/msm: Offset MDSS HBB value by 13")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699276/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-2-0987acc0427f@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6177c7a24 ]
As in the previous generations, on UBWC 5.x and 6.x devices the Highest
Bank Bit value should be programmed into the hardware with the offset of
-13. Correct the value written into the register to prevent
unpredictable results.
Fixes: 227d4ce0b0 ("drm/msm: Offset MDSS HBB value by 13")
Tested-by: Val Packett <val@packett.cool> # x1e80100-dell-latitude-7455
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/699274/
Link: https://lore.kernel.org/r/20260119-msm-ubwc-fixes-v4-1-0987acc0427f@oss.qualcomm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f7be8afc4 ]
The threaded interrupt handler on RK3576 checks HPD IRQ status before
deciding to continue with interrupt clearing and unmasking.
This is not only redundant, since a similar verification has been
already performed by the hard IRQ handler before masking the interrupt,
but is also error prone, because it might happen that hardware clears
the status register right after the masking operation completes, and
before the threaded handler reads its value.
The consequence is that HPD IRQ gets never unmasked, which breaks
hotplug detection until reloading the driver or rebooting the system.
Drop the unnecessary verification of the HPD interrupt status from the
threaded interrupt handler.
Fixes: 36439120ef ("drm/rockchip: dw_hdmi_qp: Add basic RK3576 HDMI output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260115-dw-hdmi-qp-hpd-v1-1-e59c166eaa65@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6dad7fa858 ]
Add colorbar disable operation before reset chontroller, to make sure
colorbar status is clear in the DP init, so if rmmod the driver and the
previous colorbar configuration will not affect the next time insmod the
driver.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-5-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0607052a6a ]
When using command rmmod and insmod, there is no showing in second time
insmoding. Because DP controller won't send HPD signals, if connection
doesn't change or controller isn't reset. So add reset before unreset
in hibmc_dp_hw_init().
And also need to move the HDCP cfg after DP controller de-resets, so
that HDCP configuration takes effect.
Fixes: 3c7623fb5b ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
Signed-off-by: Baihan Li <libaihan@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Tao Tian <tiantao6@hisilicon.com>
Link: https://patch.msgid.link/20251210023759.3944834-4-shiyongbang@huawei.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
