[ Upstream commit 1350dd3691 ]
It's GPU page size not CPU page size. In most cases they
are the same, but not always. This can lead to overallocation
on systems with larger pages.
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dbf0c7556 ]
Now for dwmac-loongson {tx,rx}_fifo_size are uninitialised, which means
zero. This means dwmac-loongson doesn't support changing MTU because in
stmmac_change_mtu() it requires the fifo size be no less than MTU. Thus,
set the correct tx_fifo_size and rx_fifo_size for it (16KB multiplied by
queue counts).
Here {tx,rx}_fifo_size is initialised with the initial value (also the
maximum value) of {tx,rx}_queues_to_use. So it will keep as 16KB if we
don't change the queue count, and will be larger than 16KB if we change
(decrease) the queue count. However stmmac_change_mtu() still work well
with current logic (MTU cannot be larger than 16KB for stmmac).
Note: the Fixes tag picked here is the oldest commit and key commit of
the dwmac-loongson series "stmmac: Add Loongson platform support".
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250210134328.2755328-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e738d77f78 ]
Frame shape and curr_dr_freq could be updated by sdw_compute_bus_params().
Peripherals will set curr_dr_freq as their frequency. Managers
should do the same. Then update frame shape according to the actual
bus frequency.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcc48a73ea ]
During runtime suspend scenario, SoundWire wake should be enabled and
during system level suspend scenario SoundWire wake should be disabled.
Implement the SoundWire wake enable/disable sequence as per design flow
for SoundWire poweroff mode.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21860f340b ]
This code's intention is to configure lane0 and lane2 tunings, but for
lane2 there is a typo and it ends up tuning something else.
Fix the typo, as it doesn't appear to make sense to apply different
tunings for lane0 vs lane2.
The same typo appears to exist in the bootloader, hence we restore the
original value in the typo'd registers as well. This can be removed
once / if the bootloader is updated.
Note that this is incorrect in the downstream driver as well - the
values had been copied from there.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-4-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d58c04e305 ]
As reported by Damon Ding, the phy_get_mode() call doesn't work as
expected unless the PHY driver has a .set_mode() call. This prompts PHY
drivers to have empty stubs for .set_mode() for the sake of being able
to get the mode.
Make .set_mode() callback truly optional and update PHY's mode even if
it there is none.
Cc: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/96f8310f-93f1-4bcb-8637-137e1159ff83@rock-chips.com
Tested-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250209-phy-fix-set-moe-v2-1-76e248503856@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2947c8065e ]
According to the datasheet, setting the dig_clk_sel bit of CMN_REG(0097)
to 1'b1 selects LCPLL as the reference clock, while setting it to 1'b0
selects the ROPLL.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250205105157.580060-2-damon.ding@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2bd65fbb6 ]
The Renesas RZ/G3S supports a power-saving mode where power to most of
the SoC components is lost, including the PIN controller. Save and
restore the pull-up/pull-down register contents to ensure the
functionality is preserved after a suspend/resume cycle.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250205100116.2032765-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a6984c5b ]
The Renesas RZ/G3S supports a power saving mode where power to most of the
SoC components is turned off. When returning from this power saving mode,
SoC components need to be re-configured.
The SCIFs on the Renesas RZ/G3S need to be re-configured as well when
returning from this power saving mode. The sh-sci code already configures
the SCIF clocks, power domain and registers by calling uart_resume_port()
in sci_resume(). On suspend path the SCIF UART ports are suspended
accordingly (by calling uart_suspend_port() in sci_suspend()). The only
missing setting is the reset signal. For this assert/de-assert the reset
signal on driver suspend/resume.
In case the no_console_suspend is specified by the user, the registers need
to be saved on suspend path and restore on resume path. To do this the
sci_console_save()/sci_console_restore() functions were added. There is no
need to cache/restore the status or FIFO registers. Only the control
registers. The registers that will be saved/restored on suspend/resume are
specified by the struct sci_suspend_regs data structure.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250207113313.545432-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ae891b826 ]
The old default value for slice is 0.75 msec * (1 + ilog(ncpus)) which
means that we have a default slice of:
0.75 for 1 cpu
1.50 up to 3 cpus
2.25 up to 7 cpus
3.00 for 8 cpus and above.
For HZ=250 and HZ=100, because of the tick accuracy, the runtime of
tasks is far higher than their slice.
For HZ=1000 with 8 cpus or more, the accuracy of tick is already
satisfactory, but there is still an issue that tasks will get an extra
tick because the tick often arrives a little faster than expected. In
this case, the task can only wait until the next tick to consider that it
has reached its deadline, and will run 1ms longer.
vruntime + sysctl_sched_base_slice = deadline
|-----------|-----------|-----------|-----------|
1ms 1ms 1ms 1ms
^ ^ ^ ^
tick1 tick2 tick3 tick4(nearly 4ms)
There are two reasons for tick error: clockevent precision and the
CONFIG_IRQ_TIME_ACCOUNTING/CONFIG_PARAVIRT_TIME_ACCOUNTING. with
CONFIG_IRQ_TIME_ACCOUNTING every tick will be less than 1ms, but even
without it, because of clockevent precision, tick still often less than
1ms.
In order to make scheduling more precise, we changed 0.75 to 0.70,
Using 0.70 instead of 0.75 should not change much for other configs
and would fix this issue:
0.70 for 1 cpu
1.40 up to 3 cpus
2.10 up to 7 cpus
2.8 for 8 cpus and above.
This does not guarantee that tasks can run the slice time accurately
every time, but occasionally running an extra tick has little impact.
Signed-off-by: zihan zhou <15645113830zzh@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250208075322.13139-1-15645113830zzh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20ad96c9a ]
Notably, don't attempt to decode an immediate when MOD == 3.
Additionally have it return the instruction length, such that WARN
like bugs can more reliably skip to the correct instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20250207122546.721120726@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 882b86fd4e ]
Sami reminded me that FineIBT failure does not hook into the regular
CFI failure case, and as such CFI_PERMISSIVE does not work.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lkml.kernel.org/r/20250214092619.GB21726@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6884d20510 ]
It is generally expected that the write() function should return a
positive value indicating the number of bytes written or a negative
error code if an error occurs. Returning 0 is unusual and can lead
to unexpected behavior.
When the user program writes the same value to wedged_mode twice in
a row, a lockup will occur, because the value expected to be
returned by the write() function inside the program should be equal
to the actual written value instead of 0.
To reproduce the issue:
echo 1 > /sys/kernel/debug/dri/0/wedged_mode
echo 1 > /sys/kernel/debug/dri/0/wedged_mode <- lockup here
Signed-off-by: Xin Wang <x.wang@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Cc: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213223615.2327367-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a243e1b81 ]
If regmap_read() fails, random stack value was used in calculating new
frequency in recalc_rate() callbacks. Such failure is really not
expected as these are all MMIO reads, however code should be here
correct and bail out. This also avoids possible warning on
uninitialized value.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250212-b4-clk-qcom-clean-v3-1-499f37444f5d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d02941c83 ]
There are some ipq5018 based device's firmware only can able to boot
arm32 but the clock driver dont allow it to be compiled on arm32.
Therefore allow GCC for IPQ5018 to be selected when building ARM32
kernel
Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20241007163414.32458-4-exxxxkc@getgoogleoff.me
[bjorn: Updated commit message, per Dmitry's suggestion]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff57025c35 ]
Make sure to differentiate normal behavior, e.g. there's no stolen, from
allocation errors or failure to initialize lower layers.
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213192909.996148-5-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a6f18f286 ]
GCC can see that the value range for "order" is capped, but this leads
it to consider that it might be negative, leading to a false positive
warning (with GCC 15 with -Warray-bounds -fdiagnostics-details):
../drivers/net/ethernet/mellanox/mlx4/alloc.c:691:47: error: array subscript -1 is below array bounds of 'long unsigned int *[2]' [-Werror=array-bounds=]
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o);
| ~~~~~~~~~~~^~~
'mlx4_alloc_db_from_pgdir': events 1-2
691 | i = find_first_bit(pgdir->bits[o], MLX4_DB_PER_PAGE >> o); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| | | | | (2) out of array bounds here
| (1) when the condition is evaluated to true In file included from ../drivers/net/ethernet/mellanox/mlx4/mlx4.h:53,
from ../drivers/net/ethernet/mellanox/mlx4/alloc.c:42:
../include/linux/mlx4/device.h:664:33: note: while referencing 'bits'
664 | unsigned long *bits[2];
| ^~~~
Switch the argument to unsigned int, which removes the compiler needing
to consider negative values.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250210174504.work.075-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d6a99acf ]
Memset the config argument to get_mbus_config V4L2 sub-device pad
operation to zero before calling the operation. This ensures the callers
don't need to bother with it nor the implementations need to set all
fields that may not be relevant to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3b82d49bf ]
The datasheet for this sensor documents the minimum vblanking as being
32 lines. It does fix some problems with occasional black lines at the
bottom of images (tested on Raspberry Pi).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08fafac4c9 ]
As noted in [0], SeaBIOS (QEMU default) makes a mess of the terminal,
qboot does not.
It turns out this is actually useful with kunit.py, since the user is
exposed to this issue if they set --raw_output=all.
qboot is also faster than SeaBIOS, but it's is marginal for this
usecase.
[0] https://lore.kernel.org/all/CA+i-1C0wYb-gZ8Mwh3WSVpbk-LF-Uo+njVbASJPe1WXDURoV7A@mail.gmail.com/
Both SeaBIOS and qboot are x86-specific.
Link: https://lore.kernel.org/r/20250124-kunit-qboot-v1-1-815e4d4c6f7c@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fb50cecf ]
This reverts commit ccfd889acb
The indicated commit
* does not describe the problem that change tries to solve
* has programming issues
* introduces a bug: forever clears NETLBL_SECATTR_MLS_CAT
in (struct smack_known *)skp->smk_netlabel.flags
Reverting the commit to reapproach original problem
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a158a937d8 ]
If SMACK label has CIPSO representation w/o categories, e.g.:
| # cat /smack/cipso2
| foo 10
| @ 250/2
| ...
then SMACK does not recognize such CIPSO in input ipv4 packets
and substitues '*' label instead. Audit records may look like
| lsm=SMACK fn=smack_socket_sock_rcv_skb action=denied
| subject="*" object="_" requested=w pid=0 comm="swapper/1" ...
This happens in two steps:
1) security/smack/smackfs.c`smk_set_cipso
does not clear NETLBL_SECATTR_MLS_CAT
from (struct smack_known *)skp->smk_netlabel.flags
on assigning CIPSO w/o categories:
| rcu_assign_pointer(skp->smk_netlabel.attr.mls.cat, ncats.attr.mls.cat);
| skp->smk_netlabel.attr.mls.lvl = ncats.attr.mls.lvl;
2) security/smack/smack_lsm.c`smack_from_secattr
can not match skp->smk_netlabel with input packet's
struct netlbl_lsm_secattr *sap
because sap->flags have not NETLBL_SECATTR_MLS_CAT (what is correct)
but skp->smk_netlabel.flags have (what is incorrect):
| if ((sap->flags & NETLBL_SECATTR_MLS_CAT) == 0) {
| if ((skp->smk_netlabel.flags &
| NETLBL_SECATTR_MLS_CAT) == 0)
| found = 1;
| break;
| }
This commit sets/clears NETLBL_SECATTR_MLS_CAT in
skp->smk_netlabel.flags according to the presense of CIPSO categories.
The update of smk_netlabel is not atomic, so input packets processing
still may be incorrect during short time while update proceeds.
Signed-off-by: Konstantin Andreev <andreev@swemel.ru>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c98868e816 ]
Cross case in pinctrl framework make impossible to an hogged pin and
another, not hogged, used within the same device-tree node. For example
with this simplified device-tree :
&pinctrl {
pinctrl_pin_1: pinctrl-pin-1 {
pins = "dummy-pinctrl-pin";
};
};
&rtc {
pinctrl-names = "default"
pinctrl-0 = <&pinctrl_pin_1 &rtc_pin_1>
rtc_pin_1: rtc-pin-1 {
pins = "dummy-rtc-pin";
};
};
"pinctrl_pin_1" configuration is never set. This produces this path in
the code:
really_probe()
pinctrl_bind_pins()
| devm_pinctrl_get()
| pinctrl_get()
| create_pinctrl()
| pinctrl_dt_to_map()
| // Hog pin create an abort for all pins of the node
| ret = dt_to_map_one_config()
| | /* Do not defer probing of hogs (circular loop) */
| | if (np_pctldev == p->dev->of_node)
| | return -ENODEV;
| if (ret)
| goto err
|
call_driver_probe()
stm32_rtc_probe()
pinctrl_enable()
pinctrl_claim_hogs()
create_pinctrl()
for_each_maps(maps_node, i, map)
// Not hog pin is skipped
if (pctldev && strcmp(dev_name(pctldev->dev),
map->ctrl_dev_name))
continue;
At the first call of create_pinctrl() the hogged pin produces an abort to
avoid a defer of hogged pins. All other pin configurations are trashed.
At the second call, create_pinctrl is now called with pctldev parameter to
get hogs, but in this context only hogs are set. And other pins are
skipped.
To handle this, do not produce an abort in the first call of
create_pinctrl(). Classic pin configuration will be set in
pinctrl_bind_pins() context. And the hogged pin configuration will be set
in pinctrl_claim_hogs() context.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/20250116170009.2075544-1-valentin.caron@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f1186a8d7 ]
snd_soc_dai_set_tdm_slot() calls .xlate_tdm_slot_mask() or
snd_soc_xlate_tdm_slot_mask(), but didn't check its return value.
Let's check it.
This patch might break existing driver. In such case, let's makes
each func to void instead of int.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6z7yk61.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c3b5f3740 ]
The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.
This fixes TDM clock errors when streams are stopped.
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 783db6851c ]
Lower the volume if it is violating the platform maximum at its initial
value (i.e. at the time of the 'snd_soc_limit_volume' call).
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
[Cherry picked from the Asahi kernel with fixups -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-volume-limit-v1-1-b98fcf4cdbad@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5abc174016 ]
Fpga get config status just returns status through ret_payload and there
is no need to allocate local buf and send its address through SMC args.
Moreover, the address that is being passed till now is linux virtual
address and is incorrect.
Corresponding modification has been done in the firmware to avoid using the
address sent by linux.
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.prasad.paladugu@amd.com>
Signed-off-by: Nava kishore Manne <nava.kishore.manne@amd.com>
Link: https://lore.kernel.org/r/20250207054951.1650534-1-nava.kishore.manne@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f622a8b07 ]
Currently it is assumed that the firmware doesn't present the host
partition in the list of partitions presented as part of the response
to PARTITION_INFO_GET from the firmware. However, there are few
platforms that prefer to present the same in the list of partitions.
It is not manadatory but not restricted as well.
So handle the same by making sure to check the presence of the host
VM ID in the XArray partition information maintained/managed in the
driver before attempting to add it.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-7-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efff6a7f16 ]
When the firmware compatibility was handled previously in the commit
8e3f9da608 ("firmware: arm_ffa: Handle compatibility with different firmware versions"),
we only addressed firmware versions that have higher minor versions
compared to the driver version which is should be considered compatible
unless the firmware returns NOT_SUPPORTED.
However, if the firmware reports higher major version than the driver
supported, we need to reject it. If the firmware can work in a compatible
mode with the driver requested version, it must return the same major
version as requested.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Message-Id: <20250217-ffa_updates-v3-12-bd1d9de615e7@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9dd3d5d258 ]
Wrap the high temperature warning in a temperature event with
a call to net_ratelimit() to prevent flooding the kernel log
with repeated warning messages when temperature exceeds the
threshold multiple times within a short duration.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 633f16d7e0 ]
In the sensor_count field of the MTEWE register, bits 1-62 are
supported only for unmanaged switches, not for NICs, and bit 63
is reserved for internal use.
To prevent confusing output that may include set bits that are
not relevant to NIC sensors, we update the bitmask to retain only
the first bit, which corresponds to the sensor ASIC.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/20250213094641.226501-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4740118b7 ]
Artem reported that the CPU load was 100% when capturing from
vivid at low resolution with ffmpeg.
This was caused by:
while (time_is_after_jiffies(cur_jiffies + wait_jiffies) &&
!kthread_should_stop())
schedule();
If there are no other processes running that can be scheduled,
then this is basically a busy-loop.
Change it to wait_event_interruptible_timeout() which doesn't
have that problem.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219570
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 999f458c17 ]
The IMSIC driver assigns the IMSIC domain specific imsic_irq_set_affinity()
callback to the per device leaf MSI domain. That's a layering violation as
it is called with the leaf domain data and not with the IMSIC domain
data. This prevents moving the IMSIC driver to the common MSI library which
uses the generic msi_domain_set_affinity() callback for device MSI domains.
Instead of using imsic_irq_set_affinity() for leaf MSI domains, use
imsic_irq_set_affinity() for the non-leaf IMSIC base domain and use
irq_chip_set_affinity_parent() for leaf MSI domains.
[ tglx: Massaged change log ]
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-2-apatel@ventanamicro.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4441b976df ]
Clang and GCC complain about overlapped initialisers in the
hrtimer_clock_to_base_table definition. With `make W=1` and CONFIG_WERROR=y
(which is default nowadays) this breaks the build:
CC kernel/time/hrtimer.o
kernel/time/hrtimer.c:124:21: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
124 | [CLOCK_REALTIME] = HRTIMER_BASE_REALTIME,
kernel/time/hrtimer.c:122:27: note: previous initialization is here
122 | [0 ... MAX_CLOCKS - 1] = HRTIMER_MAX_CLOCK_BASES,
(and similar for CLOCK_MONOTONIC, CLOCK_BOOTTIME, and CLOCK_TAI).
hrtimer_clockid_to_base(), which uses the table, is only used in
__hrtimer_init(), which is not a hotpath.
Therefore replace the table lookup with a switch case in
hrtimer_clockid_to_base() to avoid this warning.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250214134424.3367619-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d42d543368 ]
When a vxlan netdevice is brought up, if its default remote is a multicast
address, the device joins the indicated group.
Therefore when the multicast remote address changes, the device should
leave the current group and subscribe to the new one. Similarly when the
interface used for endpoint communication is changed in a situation when
multicast remote is configured. This is currently not done.
Both vxlan_igmp_join() and vxlan_igmp_leave() can however fail. So it is
possible that with such fix, the netdevice will end up in an inconsistent
situation where the old group is not joined anymore, but joining the new
group fails. Should we join the new group first, and leave the old one
second, we might end up in the opposite situation, where both groups are
joined. Undoing any of this during rollback is going to be similarly
problematic.
One solution would be to just forbid the change when the netdevice is up.
However in vnifilter mode, changing the group address is allowed, and these
problems are simply ignored (see vxlan_vni_update_group()):
# ip link add name br up type bridge vlan_filtering 1
# ip link add vx1 up master br type vxlan external vnifilter local 192.0.2.1 dev lo dstport 4789
# bridge vni add dev vx1 vni 200 group 224.0.0.1
# tcpdump -i lo &
# bridge vni add dev vx1 vni 200 group 224.0.0.2
18:55:46.523438 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
18:55:46.943447 IP 0.0.0.0 > 224.0.0.22: igmp v3 report, 1 group record(s)
# bridge vni
dev vni group/remote
vx1 200 224.0.0.2
Having two different modes of operation for conceptually the same interface
is silly, so in this patch, just do what the vnifilter code does and deal
with the errors by crossing fingers real hard.
The vnifilter code leaves old before joining new, and in case of join /
leave failures does not roll back the configuration changes that have
already been applied, but bails out of joining if it could not leave. Do
the same here: leave before join, apply changes unconditionally and do not
attempt to join if we couldn't leave.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cccf6ee090 ]
When the HED driver is built-in, it initializes after evged because they
both are at the same initcall level, so the initialization ordering
depends on the Makefile order. However, this prevents RAS records
coming in between the evged driver initialization and the HED driver
initialization from being handled.
If the number of such RAS records is above the APEI HEST error source
number, the HEST resources may be exhausted, and that may affect
subsequent RAS error reporting.
To fix this issue, change the initcall level of HED to subsys_initcall
and prevent the driver from being built as a module by changing ACPI_HED
in Kconfig from "tristate" to "bool".
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Link: https://patch.msgid.link/20250212063408.927666-1-tanxiaofei@huawei.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff61f380de ]
Commit 903534fa7d ("PCI: Fix resource double counting on remove &
rescan") fixed double counting of mem resources because of old_size being
applied too early.
Fix a similar counting bug on the io resource side.
Link: https://lore.kernel.org/r/20241216175632.4175-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xiaochun Lee <lixc17@lenovo.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fdeafd66e ]
mlx4 doesn't support ndo_xdp_xmit / XDP_REDIRECT and wasn't
using page pool until now, so it could run XDP completions
in netpoll (NAPI budget == 0) just fine. Page pool has calling
context requirements, make sure we don't try to call it from
what is potentially HW IRQ context.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250213010635.1354034-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab1bc2290f ]
of_property_read_bool() should be used only on boolean properties.
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250212-syscon-phandle-args-can-v2-3-ac9a1253396b@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6568cb40e7 ]
Starting with commit c141ecc3ce ("of: Warn when of_property_read_bool()
is used on non-boolean properties"), probing the gpcv2 device on i.MX8M
SoCs leads to warnings when LOCKDEP is enabled.
Fix this by checking property presence with of_property_present as
intended.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20250218-gpcv2-of-property-present-v1-1-3bb1a9789654@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 486055f5e0 ]
A single scatter-gather entry is limited by a 32 bits "length" field
that is practically 4GB - PAGE_SIZE. This means that even when the
memory is physically contiguous, we might need more than one entry to
represent it. Additionally when using dmabuf, the sg_table might be
originated outside the subsystem and optimized for other needs.
For instance an SGT of 16GB GPU continuous memory might look like this:
(a real life example)
dma_address 34401400000, length fffff000
dma_address 345013ff000, length fffff000
dma_address 346013fe000, length fffff000
dma_address 347013fd000, length fffff000
dma_address 348013fc000, length 4000
Since ib_umem_find_best_pgsz works within SG entries, in the above case
we will result with the worst possible 4KB page size.
Fix this by taking into consideration only the alignment of addresses of
real discontinuity points rather than treating SG entries as such, and
adjust the page iterator to correctly handle cross SG entry pages.
There is currently an assumption that drivers do not ask for pages
bigger than maximal DMA size supported by their devices.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250217141623.12428-1-mrgolin@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bd2aad57d ]
The following splat has been observed on a SAMA5D27 platform using
atmel_serial:
BUG: sleeping function called from invalid context at kernel/irq/manage.c:738
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0
preempt_count: 1, expected: 0
INFO: lockdep is turned off.
irq event stamp: 0
hardirqs last enabled at (0): [<00000000>] 0x0
hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec
softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec
softirqs last disabled at (0): [<00000000>] 0x0
CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74
Hardware name: Atmel SAMA5
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x44/0x70
dump_stack_lvl from __might_resched+0x38c/0x598
__might_resched from disable_irq+0x1c/0x48
disable_irq from mctrl_gpio_disable_ms+0x74/0xc0
mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4
atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8
atmel_set_termios from uart_change_line_settings+0x15c/0x994
uart_change_line_settings from uart_set_termios+0x2b0/0x668
uart_set_termios from tty_set_termios+0x600/0x8ec
tty_set_termios from ttyport_set_flow_control+0x188/0x1e0
ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]
wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]
hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]
hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]
hci_power_on [bluetooth] from process_one_work+0x998/0x1a38
process_one_work from worker_thread+0x6e0/0xfb4
worker_thread from kthread+0x3d4/0x484
kthread from ret_from_fork+0x14/0x28
This warning is emitted when trying to toggle, at the highest level,
some flow control (with serdev_device_set_flow_control) in a device
driver. At the lowest level, the atmel_serial driver is using
serial_mctrl_gpio lib to enable/disable the corresponding IRQs
accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to
disable_irq (called in mctrl_gpio_disable_ms) being possibly called in
some atomic context (some tty drivers perform modem lines configuration
in regions protected by port lock).
Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one
and a blocking one. Replace mctrl_gpio_disable_ms calls with the
relevant version depending on whether the call is protected by some port
lock.
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Acked-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://lore.kernel.org/r/20250217-atomic_sleep_mctrl_serial_gpio-v3-1-59324b313eef@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbf4890c6f ]
Don't try to operate on a drm_wb_connector as an amdgpu_dm_connector.
While dereferencing aconnector->base will "work" it's wrong and
might lead to unknown bad things. Just... don't.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ae6dfc0b6 ]
This reverts commit 13437c9160.
Reason to revert: idle power regression found in testing.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Leo Zeng <Leo.Zeng@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
