[ Upstream commit 56145d2373 ]
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes: 69fd337a97 ("bpf: per-cgroup lsm flavor")
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4c13ab362 ]
The current implementation in the igb_xsk_wakeup expects
the Rx and Tx queues to share the same irq. This would lead
to triggering of incorrect irq in split irq configuration.
This patch addresses this issue which could impact environments
with 2 active cpu cores
or when the number of queues is reduced to 2 or less
cat /proc/interrupts | grep eno2
167: 0 0 0 0 IR-PCI-MSIX-0000:08:00.0
0-edge eno2
168: 0 0 0 0 IR-PCI-MSIX-0000:08:00.0
1-edge eno2-rx-0
169: 0 0 0 0 IR-PCI-MSIX-0000:08:00.0
2-edge eno2-rx-1
170: 0 0 0 0 IR-PCI-MSIX-0000:08:00.0
3-edge eno2-tx-0
171: 0 0 0 0 IR-PCI-MSIX-0000:08:00.0
4-edge eno2-tx-1
Furthermore it uses the flags input argument to trigger either rx, tx or
both rx and tx irqs as specified in the ndo_xsk_wakeup api documentation
Fixes: 80f6ccf9f1 ("igb: Introduce XSK data structures and helpers")
Signed-off-by: Vivek Behera <vivek.behera@siemens.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b848521701 ]
iavf sets LIBIE_MAX_MTU as netdev->max_mtu, ignoring vf_res->max_mtu
from PF [1]. This allows setting an MTU beyond the actual hardware
limit, causing TX queue timeouts [2].
Set correct netdev->max_mtu using vf_res->max_mtu from the PF.
Note that currently PF drivers such as ice/i40e set the frame size in
vf_res->max_mtu, not MTU. Convert vf_res->max_mtu to MTU before setting
netdev->max_mtu.
[1]
# ip -j -d link show $DEV | jq '.[0].max_mtu'
16356
[2]
iavf 0000:00:05.0 enp0s5: NETDEV WATCHDOG: CPU: 1: transmit queue 0 timed out 5692 ms
iavf 0000:00:05.0 enp0s5: NIC Link is Up Speed is 10 Gbps Full Duplex
iavf 0000:00:05.0 enp0s5: NETDEV WATCHDOG: CPU: 6: transmit queue 3 timed out 5312 ms
iavf 0000:00:05.0 enp0s5: NIC Link is Up Speed is 10 Gbps Full Duplex
...
Fixes: 5fa4caff59 ("iavf: switch to Page Pool")
Signed-off-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eef33aa449 ]
The referenced commit came from a misunderstanding of the FW LLDP filter
AQ (Admin Queue) command due to the error in the internal documentation.
Contrary to the assumptions in the original commit, VFs can be added and
deleted from this filter without any problems. Introduced dev_info message
proved to be useful, so reverting the whole commit does not make sense.
Without this fix, trusted VFs do not receive LLDP traffic, if there is an
AQ LLDP filter on PF. When trusted VF attempts to add an LLDP multicast
MAC address, the following message can be seen in dmesg on host:
ice 0000:33:00.0: Failed to add Rx LLDP rule on VSI 20 error: -95
Revert checking VSI type when adding LLDP filter through AQ.
Fixes: 4d5a1c4e6d ("ice: do not add LLDP-specific filter if not necessary")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b57227d59 ]
read_acpi_id() attempts to evaluate _CST using a stack buffer of
sizeof(union acpi_object) (48 bytes), but _CST returns a nested Package
of sub-Packages (one per C-state, each containing a register descriptor,
type, latency, and power) requiring hundreds of bytes. The evaluation
always fails with AE_BUFFER_OVERFLOW.
On modern systems using FFH/MWAIT entry (where pblk is zero), this
causes the function to return before setting the acpi_id_cst_present
bit. In check_acpi_ids(), flags.power is then zero for all Phase 2 CPUs
(physical CPUs beyond dom0's vCPU count), so push_cxx_to_hypervisor() is
never called for them.
On a system with dom0_max_vcpus=2 and 8 physical CPUs, only PCPUs 0-1
receive C-state data. PCPUs 2-7 are stuck in C0/C1 idle, unable to
enter C2/C3. This costs measurable wall power (4W observed on an Intel
Core Ultra 7 265K with Xen 4.20).
The function never uses the _CST return value -- it only needs to know
whether _CST exists. Replace the broken acpi_evaluate_object() call with
acpi_has_method(), which correctly detects _CST presence using
acpi_get_handle() without any buffer allocation. This brings C-state
detection to parity with the P-state path, which already works correctly
for Phase 2 CPUs.
Fixes: 59a5680291 ("xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.")
Signed-off-by: David Thomson <dt@linux-mail.net>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260224093707.19679-1-dt@linux-mail.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a877ececd ]
syzbot reported a circular locking dependency in rds_tcp_tune() where
sk_net_refcnt_upgrade() is called while holding the socket lock:
======================================================
WARNING: possible circular locking dependency detected
======================================================
kworker/u10:8/15040 is trying to acquire lock:
ffffffff8e9aaf80 (fs_reclaim){+.+.}-{0:0},
at: __kmalloc_cache_noprof+0x4b/0x6f0
but task is already holding lock:
ffff88805a3c1ce0 (k-sk_lock-AF_INET6){+.+.}-{0:0},
at: rds_tcp_tune+0xd7/0x930
The issue occurs because sk_net_refcnt_upgrade() performs memory
allocation (via get_net_track() -> ref_tracker_alloc()) while the
socket lock is held, creating a circular dependency with fs_reclaim.
Fix this by moving sk_net_refcnt_upgrade() outside the socket lock
critical section. This is safe because the fields modified by the
sk_net_refcnt_upgrade() call (sk_net_refcnt, ns_tracker) are not
accessed by any concurrent code path at this point.
v2:
- Corrected fixes tag
- check patch line wrap nits
- ai commentary nits
Reported-by: syzbot+2e2cf5331207053b8106@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2e2cf5331207053b8106
Fixes: 3a58f13a88 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260227202336.167757-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e10a730d1 ]
Check frame length before accessing the mgmt fields in
mt76_connac2_mac_write_txwi_80211 in order to avoid a possible oob
access.
Fixes: 577dbc6c65 ("mt76: mt7915: enable offloading of sequence number assignment")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-3-b0f6d1ad4850@kernel.org
[fix check to also cover mgmt->u.action.u.addba_req.capab,
correct Fixes tag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c41a9abd6a ]
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-2-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6086284630 ]
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260226-mt76-addba-req-oob-access-v1-1-b0f6d1ad4850@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72c6df8f28 ]
Make sure that wl->mutex is locked before it is unlocked. This has been
detected by the Clang thread-safety analyzer.
Fixes: 45aa7f071b ("wlcore: Use generic runtime pm calls for wowlan elp configuration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-26-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d98c24617a ]
cw1200_wow_suspend() must only return with priv->conf_mutex locked if it
returns zero. This mutex must be unlocked if an error is returned. Add
mutex_unlock() calls to the error paths from which that call is missing.
This has been detected by the Clang thread-safety analyzer.
Fixes: a910e4a94f ("cw1200: add driver for the ST-E CW1100 & CW1200 WLAN chipsets")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223220102.2158611-25-bart.vanassche@linux.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6c73126ecd ]
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 1cd3b40797 ("octeon_ep_vf: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-5-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43b3160cb6 ]
Utilize READ_ONCE and WRITE_ONCE APIs for IO queue Tx/Rx
variable access to prevent compiler optimization and reordering.
Additionally, ensure IO queue OUT/IN_CNT registers are flushed
by performing a read-back after writing.
The compiler could reorder reads/writes to pkts_pending, last_pkt_count,
etc., causing stale values to be used when calculating packets to process
or register updates to send to hardware. The Octeon hardware requires a
read-back after writing to OUT_CNT/IN_CNT registers to ensure the write
has been flushed through any posted write buffers before the interrupt
resend bit is set. Without this, we have observed cases where the hardware
didn't properly update its internal state.
wmb/rmb only provides ordering guarantees but doesn't prevent the compiler
from performing optimizations like caching in registers, load tearing etc.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260227091402.1773833-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 479d589b40 ]
bond_option_mode_set() already rejects mode changes that would make a
loaded XDP program incompatible via bond_xdp_check(). However,
bond_option_xmit_hash_policy_set() has no such guard.
For 802.3ad and balance-xor modes, bond_xdp_check() returns false when
xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually
absent due to hardware offload. This means a user can:
1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode
with a compatible xmit_hash_policy (e.g. layer2+3).
2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded.
This leaves bond->xdp_prog set but bond_xdp_check() now returning false
for the same device. When the bond is later destroyed, dev_xdp_uninstall()
calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits
the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering:
WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL))
Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an
XDP program is loaded on a bond in 802.3ad or balance-xor mode.
commit 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
introduced bond_xdp_check() which returns false for 802.3ad/balance-xor
modes when xmit_hash_policy is vlan+srcmac. The check was wired into
bond_xdp_set() to reject XDP attachment with an incompatible policy, but
the symmetric path -- preventing xmit_hash_policy from being changed to an
incompatible value after XDP is already loaded -- was left unguarded in
bond_option_xmit_hash_policy_set().
Note:
commit 094ee6017e ("bonding: check xdp prog when set bond mode")
later added a similar guard to bond_option_mode_set(), but
bond_option_xmit_hash_policy_set() remained unprotected.
Reported-by: syzbot+5a287bcdc08104bc3132@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6995aff6.050a0220.2eeac1.014e.GAE@google.com/T/
Fixes: 39a0876d59 ("net, bonding: Disallow vlan+srcmac with XDP")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260226080306.98766-2-jiayuan.chen@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cbe98f7be ]
Function rtl8365mb_phy_ocp_write() always returns 0, even when an error
occurs during register access. This patch fixes the return value to
propagate the actual error code from regmap operations.
Link: https://lore.kernel.org/netdev/a2dfde3c-d46f-434b-9d16-1e251e449068@yahoo.com/
Fixes: 2796728460 ("net: dsa: realtek: rtl8365mb: serialize indirect PHY register access")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260301-realtek_namiltd_fix1-v1-1-43a6bb707f9c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40804c4974 ]
run_kernel() appended KUnit flags directly to the caller-provided args
list. When exec_tests() calls run_kernel() repeatedly (e.g. with
--run_isolated), each call mutated the same list, causing later runs
to inherit stale filter_glob values and duplicate kunit.enable flags.
Fix this by copying args at the start of run_kernel(). Add a regression
test that calls run_kernel() twice with the same list and verifies the
original remains unchanged.
Fixes: ff9e09a376 ("kunit: tool: support running each suite/test separately")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dd34dfc8d ]
If `CONFIG_PRINTK` is not set, then the following warnings are issued
during build:
warning: unused variable: `args`
--> ../rust/kernel/kunit.rs:16:12
|
16 | pub fn err(args: fmt::Arguments<'_>) {
| ^^^^ help: if this is intentional, prefix it with an underscore: `_args`
|
= note: `#[warn(unused_variables)]` (part of `#[warn(unused)]`) on by default
warning: unused variable: `args`
--> ../rust/kernel/kunit.rs:32:13
|
32 | pub fn info(args: fmt::Arguments<'_>) {
| ^^^^ help: if this is intentional, prefix it with an underscore: `_args`
Fix this by adding a no-op assignment using `args` when `CONFIG_PRINTK`
is not set.
Fixes: a66d733da8 ("rust: support running Rust documentation tests as KUnit ones")
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e377182f02 ]
ctx_restore_mid_bb memory is allocated in wa_bb_store(), but
xe_config_device_release() only frees ctx_restore_post_bb.
Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation
when the configfs device is removed.
Fixes: b30d5de3d4 ("drm/xe/configfs: Add mid context restore bb")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260225013448.3547687-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a235e7d009)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdc8a1e11f ]
If a batch buffer is complete, it makes little sense to preempt the
fence signaling instructions in the ring, as the largest portion of the
work (the batch buffer) is already done and fence signaling consists of
only a few instructions. If these instructions are preempted, the GuC
would need to perform a context switch just to signal the fence, which
is costly and delays fence signaling. Avoid this scenario by disabling
preemption immediately after the BB start instruction and re-enabling it
after executing the fence signaling instructions.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Carlos Santa <carlos.santa@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260115004546.58060-1-matthew.brost@intel.com
(cherry picked from commit 2bcbf2dcde)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e3649e237 ]
Consider the following application:
#include <fcntl.h>
#include <string.h>
#include <drm/drm.h>
#include <sys/ioctl.h>
int main(void) {
int fd = open("/dev/dri/renderD128", O_RDWR);
struct drm_syncobj_create arg1;
ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &arg1);
struct drm_syncobj_handle arg2;
memset(&arg2, 1, sizeof(arg2)); // simulate dirty stack
arg2.handle = arg1.handle;
arg2.flags = 0;
arg2.fd = 0;
arg2.pad = 0;
// arg2.point = 0; // userspace is required to set point to 0
ioctl(fd, DRM_IOCTL_SYNCOBJ_HANDLE_TO_FD, &arg2);
}
The last ioctl returns EINVAL because args->point is not 0. However,
userspace developed against older kernel versions is not aware of the
new point field and might therefore not initialize it.
The correct check would be
if (args->flags & DRM_SYNCOBJ_FD_TO_HANDLE_FLAGS_TIMELINE)
return -EINVAL;
However, there might already be userspace that relies on this not
returning an error as long as point == 0. Therefore use the more lenient
check.
Fixes: c2d3a73006 ("drm/syncobj: Extend EXPORT_SYNC_FILE for timeline syncobjs")
Signed-off-by: Julian Orth <ju.orth@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260301-point-v1-1-21fc5fd98614@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d973b1039c ]
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Link: https://patch.msgid.link/20260221-rsi-config-ret-v1-1-9a8f805e2f31@puri.sm
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab3f894de2 ]
The mcp251x_open() function call free_irq() in its error path with the
mpc_lock mutex held. But if an interrupt already occurred the
interrupt handler will be waiting for the mpc_lock and free_irq() will
deadlock waiting for the handler to finish.
This issue is similar to the one fixed in commit 7dd9c26bd6 ("can:
mcp251x: fix deadlock if an interrupt occurs during mcp251x_open") but
for the error path.
To solve this issue move the call to free_irq() after the lock is
released. Setting `priv->force_quit = 1` beforehand ensure that the IRQ
handler will exit right away once it acquired the lock.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Link: https://patch.msgid.link/20260209144706.2261954-1-alban.bedel@lht.dlh.de
Fixes: bf66f3736a ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c35636e91e ]
Commit c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
added a locking for some variables that can be modified at runtime when
updating the sending bcm_op with a new TX_SETUP command in bcm_tx_setup().
Usually the RX_SETUP only handles and filters incoming traffic with one
exception: When the RX_RTR_FRAME flag is set a predefined CAN frame is
sent when a specific RTR frame is received. Therefore the rx bcm_op uses
bcm_can_tx() which uses the bcm_tx_lock that was only initialized in
bcm_tx_setup(). Add the missing spin_lock_init() when allocating the
bcm_op in bcm_rx_setup() to handle the RTR case properly.
Fixes: c2aba69d0c ("can: bcm: add locking for bcm_op runtime updates")
Reported-by: syzbot+5b11eccc403dd1cea9f8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-can/699466e4.a70a0220.2c38d7.00ff.GAE@google.com/
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260218-bcm_spin_lock_init-v1-1-592634c8a5b5@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9439a661c2 ]
Extend the MAC_TCR_SS (Speed Select) register field width from 2 bits
to 3 bits to properly support all speed settings.
The MAC_TCR register's SS field encoding requires 3 bits to represent
all supported speeds:
- 0x00: 10Gbps (XGMII)
- 0x02: 2.5Gbps (GMII) / 100Mbps
- 0x03: 1Gbps / 10Mbps
- 0x06: 2.5Gbps (XGMII) - P100a only
With only 2 bits, values 0x04-0x07 cannot be represented, which breaks
2.5G XGMII mode on newer platforms and causes incorrect speed select
values to be programmed.
Fixes: 07445f3c7c ("amd-xgbe: Add support for 10 Mbps speed")
Co-developed-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260226170753.250312-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 147792c395 ]
When both eth interfaces with links up are added to a bridge or hsr
interface, ping fails if the link speed is not 1Gbps (e.g., 100Mbps).
The issue is seen because when switching to offload (bridge/hsr) mode,
prueth_emac_restart() restarts the firmware and clears DRAM with
memset_io(), setting all memory to 0. This includes PORT_LINK_SPEED_OFFSET
which firmware reads for link speed. The value 0 corresponds to
FW_LINK_SPEED_1G (0x00), so for 1Gbps links the default value is correct
and ping works. For 100Mbps links, the firmware needs FW_LINK_SPEED_100M
(0x01) but gets 0 instead, causing ping to fail. The function
emac_adjust_link() is called to reconfigure, but it detects no state change
(emac->link is still 1, speed/duplex match PHY) so new_state remains false
and icssg_config_set_speed() is never called to correct the firmware speed
value.
The fix resets emac->link to 0 before calling emac_adjust_link() in
prueth_emac_common_start(). This forces new_state=true, ensuring
icssg_config_set_speed() is called to write the correct speed value to
firmware memory.
Fixes: 06feac1540 ("net: ti: icssg-prueth: Fix emac link speed handling")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20260226102356.2141871-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 101bacb303 ]
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here.
Reported-by: syzbot+72e3ea390c305de0e259@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68c95a83.050a0220.3c6139.0e5c.GAE@google.com/T/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260225123250.189289-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74badb9c20 ]
Commit 31a7a0bbeb ("dpaa2-switch: add bounds check for if_id in IRQ
handler") introduces a range check for if_id to avoid an out-of-bounds
access. If an out-of-bounds if_id is detected, the interrupt status is
not cleared. This may result in an interrupt storm.
Clear the interrupt status after detecting an out-of-bounds if_id to avoid
the problem.
Found by an experimental AI code review agent at Google.
Fixes: 31a7a0bbeb ("dpaa2-switch: add bounds check for if_id in IRQ handler")
Cc: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20260227055812.1777915-1-linux@roeck-us.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7387d6579 ]
AF_XDP should ensure that only a complete packet is sent to application.
In the zero-copy case, if the Rx queue gets full as fragments are being
enqueued, the remaining fragments are dropped.
For the multi-buffer case, add a check to ensure that the Rx queue has
enough space for all fragments of a packet before starting to enqueue
them.
Fixes: 24ea50127e ("xsk: support mbuf on ZC RX")
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260225000456.107806-3-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60abb0ac11 ]
After commit b692bf9a75 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly.
Fixes: b692bf9a75 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260225000456.107806-2-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 026dfef287 ]
We hit another corner case which leads to TcpExtTCPRcvQDrop
Connections which send RPCs in the 20-80kB range over loopback
experience spurious drops. The exact conditions for most of
the drops I investigated are that:
- socket exchanged >1MB of data so its not completely fresh
- rcvbuf is around 128kB (default, hasn't grown)
- there is ~60kB of data in rcvq
- skb > 64kB arrives
The sum of skb->len (!) of both of the skbs (the one already
in rcvq and the arriving one) is larger than rwnd.
My suspicion is that this happens because __tcp_select_window()
rounds the rwnd up to (1 << wscale) if less than half of
the rwnd has been consumed.
Eric suggests that given the number of Fixes we already have
pointing to 1d2fbaad7c it's probably time to give up on it,
until a bigger revamp of rmem management.
Also while we could risk tweaking the rwnd math, there are other
drops on workloads I investigated, after the commit in question,
not explained by this phenomenon.
Suggested-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/20260225122355.585fd57b@kernel.org
Fixes: 1d2fbaad7c ("tcp: stronger sk_rcvbuf checks")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260227003359.2391017-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6996a2d2d0 ]
Let's say we bind() an UDP socket to the wildcard address with a
non-zero port, connect() it to an address, and disconnect it from
the address.
bind() sets SOCK_BINDPORT_LOCK on sk->sk_userlocks (but not
SOCK_BINDADDR_LOCK), and connect() calls udp_lib_hash4() to put
the socket into the 4-tuple hash table.
Then, __udp_disconnect() calls sk->sk_prot->rehash(sk).
It computes a new hash based on the wildcard address and moves
the socket to a new slot in the 4-tuple hash table, leaving a
garbage in the chain that no packet hits.
Let's remove such a socket from 4-tuple hash table when disconnected.
Note that udp_sk(sk)->udp_portaddr_hash needs to be udpated after
udp_hash4_dec(hslot2) in udp_unhash4().
Fixes: 78c91ae2c6 ("ipv4/udp: Add 4-tuple hash for connected socket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260227035547.3321327-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f5197ea9a ]
We need to fall back to the synchronous removal if we can't get a
reference on the module needed for the deferred removal.
Fixes: 62188639ec ("nvme-multipath: introduce delayed removal of the multipath head node")
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be11a53722 ]
In the current implementation, flushing multicast entries in MAC mode
incorrectly deletes entries for all ports instead of only the target port,
disrupting multicast traffic on other ports. The cause is adding multicast
entries by setting only host port bit, and not setting the MAC port bits.
Fix this by setting the MAC port's bit in the port mask while adding the
multicast entry. Also fix the flush logic to preserve the host port bit
during removal of MAC port and free ALE entries when mask contains only
host port.
Fixes: 5c50a856d5 ("drivers: net: ethernet: cpsw: add multicast address to ALE table")
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224181359.2055322-1-c-vankar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ef2b20cf4 ]
skmsg (and probably other layers) are changing these pointers
while other cpus might read them concurrently.
Add corresponding READ_ONCE()/WRITE_ONCE() annotations
for UDP, TCP and AF_UNIX.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: syzbot+87f770387a9e5dc6b79b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/699ee9fc.050a0220.1cd54b.0009.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260225131547.1085509-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd677d0598 ]
In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when
remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the
nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to
fail and the nvme-fc transport layer itself will directly call
nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free
the lsrsp resources.
Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.
If online, then lsrsp->done callback will free the lsrsp. Else, return
-ENODEV to signal the nvme-fc transport to handle freeing lsrsp.
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Aristeu Rozanski <aris@redhat.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Closes: https://lore.kernel.org/linux-nvme/21255200-a271-4fa0-b099-97755c8acd4c@work/
Fixes: 10c165af35 ("nvmet-fcloop: call done callback even when remote port is gone")
Signed-off-by: Justin Tee <justintee8345@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0b4c7a491 ]
Fix netfslib such that when it's making an unbuffered or DIO write, to make
sure that it sends each subrequest strictly sequentially, waiting till the
previous one is 'committed' before sending the next so that we don't have
pieces landing out of order and potentially leaving a hole if an error
occurs (ENOSPC for example).
This is done by copying in just those bits of issuing, collecting and
retrying subrequests that are necessary to do one subrequest at a time.
Retrying, in particular, is simpler because if the current subrequest needs
retrying, the source iterator can just be copied again and the subrequest
prepped and issued again without needing to be concerned about whether it
needs merging with the previous or next in the sequence.
Note that the issuing loop waits for a subrequest to complete right after
issuing it, but this wait could be moved elsewhere allowing preparatory
steps to be performed whilst the subrequest is in progress. In particular,
once content encryption is available in netfslib, that could be done whilst
waiting, as could cleanup of buffers that have been completed.
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36d9579fed ]
In page addressing mode, the pixel values of a dirty rectangle must be sent
to the display controller one page at a time. The range of pages
corresponding to a given rectangle is being incorrectly calculated as if
the Y value of the top left coordinate of the rectangle was 0. This can
result in rectangle updates being displayed on wrong parts of the screen.
Fix the above issue by consolidating the start page calculation in a single
place at the beginning of the update_rect function, and using the
calculated value for all addressing modes.
Fixes: b0daaa5cfa ("drm/ssd130x: Support page addressing mode")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260210180932.736502-1-flavra@baylibre.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0942fc6d32 ]
Panther Lake systems introduced an autonomous power gating feature for
the integrated Gigabit Ethernet in shutdown state (S5) state. As part of
it, the reset value of DPG_EN bit was changed to 1. Clear this bit after
performing hardware reset to avoid errors such as Tx/Rx hangs, or packet
loss/corruption.
Fixes: 0c9183ce61 ("e1000e: Add support for the next LOM generation")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b3d54a85b ]
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead.
Fixes: 6d4d584a7e ("i40e: Add i40e_napi_poll tracepoint")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aa07e23dd ]
Fix IRDMA hardware initialization timeout (-110) after resume by
separating VSI-dependent configuration from RDMA resource allocation,
ensuring VSI is rebuilt before IRDMA accesses it.
After resume from suspend, IRDMA hardware initialization fails:
ice: IRDMA hardware initialization FAILED init_state=4 status=-110
Separate RDMA initialization into two phases:
1. ice_init_rdma() - Allocate resources only (no VSI/QoS access, no plug)
2. ice_rdma_finalize_setup() - Assign VSI/QoS info and plug device
This allows:
- ice_init_rdma() to stay in ice_resume() (mirrors ice_deinit_rdma()
in ice_suspend())
- VSI assignment deferred until after ice_vsi_rebuild() completes
- QoS info updated after ice_dcb_rebuild() completes
- Device plugged only when control queues, VSI, and DCB are all ready
Fixes: bc69ad7486 ("ice: avoid IRQ collision to fix init failure on ACPI S3 resume")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c31557336 ]
When deleting a flow rule using "ethtool -N <dev> delete <location>",
idpf_sideband_action_ena() incorrectly validates fsp->ring_cookie even
though ethtool doesn't populate this field for delete operations. The
uninitialized ring_cookie may randomly match RX_CLS_FLOW_DISC or
RX_CLS_FLOW_WAKE, causing validation to fail and preventing legitimate
rule deletions. Remove the unnecessary sideband action enable check and
ring_cookie validation during delete operations since action validation
is not required when removing existing rules.
Fixes: ada3e24b84 ("idpf: add flow steering support")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1500a8662d ]
The code uses the vidx for the IRQ name but that doesn't match ethtool
reporting nor netdev naming, this makes it hard to tune the device and
associate queues with IRQs. Sequentially requesting irqs starting from
'0' makes the output consistent.
This commit changes the interrupt numbering but preserves the name
format, maintaining ABI compatibility. Existing tools relying on the old
numbering are already non-functional, as they lack a useful correlation
to the interrupts.
Before:
ethtool -L eth1 tx 1 combined 3
grep . /proc/irq/*/*idpf*/../smp_affinity_list
/proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167
/proc/irq/68/idpf-eth1-TxRx-1/../smp_affinity_list:0
/proc/irq/70/idpf-eth1-TxRx-3/../smp_affinity_list:1
/proc/irq/71/idpf-eth1-TxRx-4/../smp_affinity_list:2
/proc/irq/72/idpf-eth1-Tx-5/../smp_affinity_list:3
ethtool -S eth1 | grep -v ': 0'
NIC statistics:
tx_q-0_pkts: 1002
tx_q-1_pkts: 2679
tx_q-2_pkts: 1113
tx_q-3_pkts: 1192 <----- tx_q-3 vs idpf-eth1-Tx-5
rx_q-0_pkts: 1143
rx_q-1_pkts: 3172
rx_q-2_pkts: 1074
After:
ethtool -L eth1 tx 1 combined 3
grep . /proc/irq/*/*idpf*/../smp_affinity_list
/proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167
/proc/irq/68/idpf-eth1-TxRx-0/../smp_affinity_list:0
/proc/irq/70/idpf-eth1-TxRx-1/../smp_affinity_list:1
/proc/irq/71/idpf-eth1-TxRx-2/../smp_affinity_list:2
/proc/irq/72/idpf-eth1-Tx-3/../smp_affinity_list:3
ethtool -S eth1 | grep -v ': 0'
NIC statistics:
tx_q-0_pkts: 118
tx_q-1_pkts: 134
tx_q-2_pkts: 228
tx_q-3_pkts: 138 <--- tx_q-3 matches idpf-eth1-Tx-3
rx_q-0_pkts: 111
rx_q-1_pkts: 366
rx_q-2_pkts: 120
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 712896ac4b ]
Currently, in idpf_wait_for_sw_marker_completion(), when an
IDPF_TXD_COMPLT_SW_MARKER packet is found, the routine breaks out of
the for loop and does not increment the next_to_clean counter. This
causes the subsequent NAPI polls to run into the same
IDPF_TXD_COMPLT_SW_MARKER packet again and print out the following:
[ 23.261341] idpf 0000:05:00.0 eth1: Unknown TX completion type: 5
Instead, we should increment next_to_clean regardless when an
IDPF_TXD_COMPLT_SW_MARKER packet is found.
Tested: with the patch applied, we do not see the errors above from NAPI
polls anymore.
Fixes: 9d39447051 ("idpf: remove SW marker handling from NAPI")
Signed-off-by: Li Li <boolli@google.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 07ed4f05bb ]
Return early in it87_resume() if it87_lock() fails instead of ignoring the
return value of that function. This patch suppresses a Clang thread-safety
warning.
Cc: Frank Crawford <frank@crawford.emu.id.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Fixes: 376e1a937b ("hwmon: (it87) Add calls to smbus_enable/smbus_disable as required")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20260223220102.2158611-15-bart.vanassche@linux.dev
[groeck: Declare 'ret' at the beginning of it87_resume()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5bed798f ]
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put.
Fixes: 9b07cdf86a ("pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
