IBI disable failures are not indicative of a software bug, so using
WARN_ON() is not appropriate. Replace these warnings with dev_err().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
To prevent inconsistent state when an error occurs, ensure the hot-join
flag is updated only when enabling or disabling hot-join succeeds.
Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wait for the bus to fully disable before proceeding, ensuring that no
operations are still in progress. Synchronize the IRQ handler only after
interrupt signals have been disabled. This approach also handles cases
where bus disable might fail, preventing race conditions and ensuring a
consistent shutdown sequence.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI specification does not define reset values for
RING_OPERATION1 fields, and some controllers (e.g., Intel) do not clear
them during a software reset. Ensure the ring pointers are explicitly
set to zero during bus initialization to avoid inconsistent state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move device name initialization to occur after i3c_bus_init()
so that i3cbus->id is guaranteed to be assigned before it is used.
Fixes: 9d4f219807 ("i3c: fix refcount inconsistency in i3c_master_register")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260112-upstream_i3c_fix-v1-1-cbbf2cb71809@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Renesas I3C controller does not retain its register state across system
suspend, requiring the driver to explicitly save and restore hardware
configuration.
Add suspend and resume NOIRQ callbacks to handle system sleep transitions.
During suspend, save the Device Address Table (DAT) entries, assert reset
lines, and disable all related clocks to allow the controller to enter a
low-power state.
On resume, re-enable clocks and reset lines in the proper order. Restore
the REFCKCTL register, master dynamic address, and all DAT entries, then
reinitialize the controller.
Store the REFCLK divider value, and the master dynamic address to restore
timing and addressing configuration after resume.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/c469ef89e0156d37746a85bfc314232847d1185a.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move the hardware initialization sequence in renesas_i3c_bus_init()
into a dedicated renesas_i3c_hw_init() helper.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/795327270a6ceb23e15513a2619a19ae4876cfba.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update the struct renesas_i3c to store the clock rate, presetn and
tresetn handlers. Replace local usage of the clock rate and reset
controls with these structure fields.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/9e1da95dd9137590c752ecd9429925afcbeb918b.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace individual devm_clk_get_enabled() calls with the clk_bulk API
and store the clock handles in the driver's private data structure.
All clocks required by the controller are now acquired and enabled using
devm_clk_bulk_get_all_enabled(), removing the need for per-SoC clock
handling and the renesas_i3c_config data.
The TCLK is accessed via a fixed index in the bulk clock array.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/1286f8600b542da55facf9920fed7c06b2b0e4d5.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Define Multi-Bus Instances at offset 0x400 for Intel controllers.
Intel SoCs include two I3C PCI devices in the Low Power Subsystem (LPSS),
each capable of hosting two I3C buses. Panther Lake and Wildcat Lake
support three buses in total (IDs 0–2), while Nova Lake supports four
(IDs 0–3).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
Create an MFD cell for each instance and use platform_data to pass the
starting address of the instance's register set.
The MIPI I3C HCI specification defines an Extended Capability that holds
the offset of each instance register set. Parsing this information is
relatively complex, so include the offsets in driver data for now.
Driver data for additional instances beyond instance 0 will be added in a
subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for Multi-Bus instance support. Convert to MFD driver but still
support only 1 instance.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the parent's MMIO mapping for multi-bus instances to avoid overlapping
regions. These instances share the same MMIO address space, but the ranges
are not guaranteed to be contiguous. By passing base_regs from the parent
mapping, child devices can access their registers without creating
conflicting mappings.
Prepare for multi-bus instance support by passing base_regs to child
devices.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Simplify the code and ensure names and IDs align with device documentation.
Use explicit device names and IDs for Intel LPSS I3C controllers instead of
dynamically allocated values.
Add "intel-lpss-i3c" to the platform_device_id table in the mipi-i3c-hci
driver and use the same name for Intel I3C controllers in the
mipi_i3c_hci_pci driver. Assign hard-coded IDs to reflect the hardware
layout.
Intel SoCs include two I3C PCI devices in the Low Power Subsystem (LPSS),
each supporting up to two I3C buses. The second PCI device is assigned ID 2
(not 1) to match this topology. Additional IDs will be introduced when
Multi-Bus Instance support is implemented.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Enable MSI support by using pci_alloc_irq_vectors() to request all
supported IRQ types. Do not call pci_free_irq_vectors() because for
resource-managed devices (those initialized with pcim_enable_device()),
IRQ vector allocation is automatically managed. See
pci_setup_msi_context() and pcim_setup_msi_release() for details.
Note: The current documentation for pci_alloc_irq_vectors() does not
mention this behavior.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All entries in the id_table have driver_data. Do not repeatedly check for
NULL driver_data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The copious initialization messages are at most useful only for debugging.
Change them from dev_info() or dev_notice() to dev_dbg().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Extended Capability ID value 0 is special. It signifies the end of the
list. Stop reading Extended Capabilities if capability ID is 0.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When I3C is disabled, unused functions are removed by the linker because
the driver relies on regmap and no I3C devices are registered, so normal
I3C paths are never called.
However, some drivers may still call low-level I3C transfer helpers.
Provide stub implementations to avoid adding conditional ifdefs everywhere.
Add stubs for i3c_device_do_xfers() and
i3c_device_get_supported_xfer_mode() only. Other stubs will be introduced
when they are actually needed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230418.nu3V6Yua-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251230145718.4088694-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251224124551.208778-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Drop i3c_priv_xfer and i3c_device_do_priv_xfers() after all driver switch
to use new API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251215172405.2982801-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update dw_i3c_master_restore_addrs() to preserve existing bits in each
Device Address Table (DAT) entry when restoring addresses. This prevents
overwriting configuration bits during PM runtime resumes.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/46112c0da44110f46709cb0e7a4595e312b95c10.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add DEV_ADDR_TABLE_DYNAMIC_MASK / DEV_ADDR_TABLE_DYNAMIC_ADDR(x) for
dynamic device addresses and DEV_ADDR_TABLE_STATIC_MASK /
DEV_ADDR_TABLE_STATIC_ADDR(x) for static device addresses in the I3C
address table. Replace manual shift-and-mask with FIELD_PREP() for both
dynamic and static addresses for clarity and maintainability.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d72896e510db1870d26a794f131f600c7e42cf00.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C controller supports automatically retrying transactions
when a device NACKs. This is useful for slave devices that may be
temporarily busy and not ready to respond immediately.
Add new ops to configure all active DAT entry with dev_nack_retry during
runtime. Returns error when value exceeds hw specified limit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/f09ee67e61d31f0a12a0bf48f01e9057ca9e2fb7.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaT4RWBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVfSgEA23oY0kPjLLkNj4KAjLoWVPmZ/5efKw49
m6YUwfvzTS8BAIq4eFHVecwAM8FAe9NwuOKgO5d9u6epAy6wzBeP2jly
=cpHq
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmk8YxITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi702B/9Mfj0HQSAaWCyMz6GJAv8+1ijVTSbG
nTFeMmipYZhPn188OvWqHsf1cw9rWY0fzenIEW05Tk3YmMvYdeRmCcOkZdeG06xw
um8XxX4L8315E0b98CCpQpVa02ux7XoNtBPjeHccl8PEErJQgQJrQ3Cc/C8kk5U5
a0KlfeVRXYWkOPJva3+wosOu0t9QgJ9ABt5stqcvYDfdkKfvatQMBN3N1nNRKkFH
yhNPv+nRtypSk8jiHhKeeCVmosC0L7MnKuO593vDr761cY5mKrgKFqc2LLlPF6r0
/p13s5SG6X38RUegWCjcK4XRJAzVcR/tyod8LkVVp8d5DC/ptcyy8H+I
=h1gC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jbkd
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTsgBwAKCRDdBJ7gKXxA
jkSIAP4jD66nEC2QyKTiv9XvXi8rpKz6RGAHNZSam0ucI5WKswEAoflmlqsoD/Kk
sN3YLwLztzCJIYU7tT3IRaPK0irwDAo=
=nkux
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
- The 2 patch series "powerpc/pseries/cmm: two smaller fixes" from David
Hildenbrand fixes a couple of minor things in ppc land.
- The 4 patch series "Improve folio split related functions" from Zi Yan
provides some cleanups and minorish fixes in the folio splitting code.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaTseCwAKCRDdBJ7gKXxA
jkCLAP9ttvtG7zhDf+tqvjCJFnybPEo6Z2B4Qx9g8i7s27gTZgD8DzYbIl+YdxrN
/tS0tdgUfrJIXR2PzzipkydNrs+lxgg=
=T65o
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling
-----BEGIN PGP SIGNATURE-----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=/78c
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for what is in next tree, mostly amdgpu and
some i915, panthor and a core revert.
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Subsystem:
- remove .priv_xfers
-----BEGIN PGP SIGNATURE-----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=tZor
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Subsystem:
- stop setting max_user_freq from the individual drivers as this has not been
hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support
-----BEGIN PGP SIGNATURE-----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=oBij
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
This tightens the dependency for the new pwm driver written in Rust to
make build bots and obviously also users happy.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmk78IQACgkQj4D7WH0S
/k6gJggAlxuVDooFBMDd0WaQvYyhNiIHYIVu7y41o2lPuOW2kAvBq833h/iFyny2
5LvhWEsLsKrgn43NMJT3HQmMaFeQXXXgESmJcIFWqgJg9V9+n+tagbxwVFYBdIpr
CspJ6JewKwJH18SvmROQ4L6TQqcT6KGyxerao+XDd6Kodje0E835TR7jS/3lr50X
1004APWJLW4yQ8VVNDzlQ67r4qkPO2dJ9Inb4KxAnhNDYQh7yd6TzaYvy1DzPo9F
VB4iFZyLzSCUpQGqHh7wm3pRkAs//rwOi1Am6FIfKIPZHJN6sf11VdEXRIueITGC
P3XradQCyE1wyqeZEGmcIN/00a1h/g==
=PaMS
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fix from Uwe Kleine-König:
"Fix missing th1520 Kconfig dependencies
This tightens the dependency for the new pwm driver written in Rust to
make build bots and obviously also users happy"
* tag 'pwm/for-6.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: Fix missing Kconfig dependencies
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
-----BEGIN PGP SIGNATURE-----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=oxk1
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
- fix spinlock op type after conversion to lock guards
- fix a memory leak in error path in gpio-regmap
- Kconfig fixes in GPIO drivers
- add a GPIO ACPI quirk for Dell Precision 7780
- set of fixes for shared GPIO management
* tag 'gpio-fixes-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: shared: make locking more fine-grained
gpio: shared: fix auxiliary device cleanup order
gpio: shared: check if a reference is populated before cleaning its resources
gpio: shared: fix NULL-pointer dereference in teardown path
gpio: shared: ignore disabled nodes when traversing the device-tree
gpiolib: acpi: Add quirk for Dell Precision 7780
gpio: tb10x: fix OF_GPIO dependency
gpio: qixis: select CONFIG_REGMAP_MMIO
gpio: regmap: Fix memleak in error path in gpio_regmap_register()
gpio: mmio: fix bad guard conversion
-----BEGIN PGP SIGNATURE-----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=zsi/
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Initialize rzg3s_pcie_msi_irq() MSI status bitmap before use (Claudiu
Beznea)
* tag 'pci-v6.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: rzg3s-host: Initialize MSI status bitmap before use
- Support for multiple sections in a BPT stream
- Aligning DMA frame with BPT frames
- Qualcomm: support for v3.1.0 controllers
-----BEGIN PGP SIGNATURE-----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=tDi0
-----END PGP SIGNATURE-----
Merge tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
The rest for 6.19 merge window. The only slightly large change is
the enablement of CIX HD-audio controller, which took a bit time to
be cooked up, while most of other changes are device-specific small
trivial fixes.
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so
it can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks
-----BEGIN PGP SIGNATURE-----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=3ys0
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
drm-misc-fixes for v6.19-rc1:
- Fix stack usage warning in novatek-nt35560.
- Fix s/r, i2c issues in nouveau and update string handling.
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83.
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties().
- Fix devcoredump crash on reading evicted bo's.
- Fix bigendian handling in mgag200.
- Fix probe failure in tilcdc.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/6c371dc1-08bf-4a34-895c-9ef348b6061b@linux.intel.com
