The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP table has values of 256000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-9-63d7dc9ddd0a@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae4 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
Fixes: d8f4a9eda0 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com
To pick up fixes from the latest perf-tools pull request from Namhyung
and get perf-tools-next in line with thinngs in other areas it uses,
like tools/lib/bpf, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current code can issue CDMA flushes (DMAPUT bumps) in the middle
of a job, before all opcodes have been written into the pushbuffer.
This can happen when pushbuffer fills up. Presumably this made sense
at some point in the past, but it doesn't anymore, as it cannot lead
to more space appearing in the pushbuffer as it is only cleaned full
jobs at a time.
Mid-job flushes can also cause problems, as in an extreme situation
(seen in practice), the hardware can run through the entire pushbuffer
including the prefix of a partially written job without the driver
being able to process any CDMA updates. This can cause the engine
MLOCK to be taken and held for extended periods as the tail of the
job is not yet available to hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250204024546.1168126-1-mperttunen@nvidia.com
Some platform devices create child devices dynamically and require the
parent device's msi-map to map device IDs to actual sideband information.
A typical use case is using ITS as a PCIe Endpoint Controller(EPC)'s
doorbell function, where PCI hosts send TLP memory writes to the EP
controller. The EP controller converts these writes to AXI transactions
and appends platform-specific sideband information.
EPC's DTS will provide such information by msi-map and msi-mask. A
simplified dts as
pcie-ep@10000000 {
...
msi-map = <0 &its 0xc 8>;
^^^ 0xc is implement defined sideband information,
which append to AXI write transaction.
^ 0 is function index.
msi-mask = <0x7>
}
Check msi-map if msi-parent missed to keep compatility with existing systems.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-5-f69b49917464@nxp.com
Document the use of (msi|iommu)-map for PCI Endpoint (EP) controllers,
which can use MSI as a doorbell mechanism. Each EP controller can support
up to 8 physical functions and 65,536 virtual functions.
Define how to construct device IDs using function bits [2:0] and virtual
function index bits [31:3], enabling (msi|iommu)-map to associate each
child device with a specific (msi|iommu)-specifier.
The EP cannot rely on PCI Requester ID (RID) because the RID is determined
by the PCI topology of the host system. Since the EP may be connected to
different PCI hosts, the RID can vary between systems and is therefore not
a reliable identifier.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-4-f69b49917464@nxp.com
Set the IRQ_DOMAIN_FLAG_MSI_IMMUTABLE flag for ITS, as it does not change
the address/data pair after setup.
Ensure compatibility with MSI users, such as PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged. Enable PCIe endpoints to
use ITS for triggering doorbells from the PCIe Root Complex (RC) side.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-3-f69b49917464@nxp.com
Add the flag IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and the API function
irq_domain_is_msi_immutable() to check if the MSI controller retains an
immutable address/data pair during irq_set_affinity().
Ensure compatibility with MSI users like PCIe Endpoint Doorbell, which
require the address/data pair to remain unchanged after setup. Use this
function to verify if the MSI controller is immutable.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-2-f69b49917464@nxp.com
platform_device_msi_init_and_alloc_irqs() performs two tasks: allocating
the MSI domain for a platform device, and allocate a number of MSIs in that
domain.
platform_device_msi_free_irqs_all() only frees the MSIs, and leaves the MSI
domain alive.
Given that platform_device_msi_init_and_alloc_irqs() is the sole tool a
platform device has to allocate platform MSIs, it makes sense for
platform_device_msi_free_irqs_all() to teardown the MSI domain at the same
time as the MSIs.
This avoids warnings and unexpected behaviours when a driver repeatedly
allocates and frees MSIs.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/all/20250414-ep-msi-v18-1-f69b49917464@nxp.com
The Falcon DMA engine allows queueing multiple operations for
improved performance. Do this to optimize firmware loading.
A performance improvement of 4x to 6x is observed.
Co-developed-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205061027.1205748-1-mperttunen@nvidia.com
The header file 'tegra_drm.h' is included in gem.c, but this file is
already include 'drm.h'. Although there is no harm in including this
file again, it is also not necessary. Furthermore, the header file is
located under 'include/uapi/drm' so ideally the full path would be
used to be explicit. For now, just remove from gem.c.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250428153435.1013101-1-jonathanh@nvidia.com
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
This code pattern trips clang up:
if (fail)
goto undo;
guard(lock)(lock);
do_stuff();
return 0;
undo:
...
as it somehow extends the scope of the guard beyond the return statement.
Replace it with a scoped guard to help it to get its act together.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071809.ajpPxfoZ-lkp@intel.com/
The manual for the Allwinner A133 SoC mentions that the maximum
supported MMC frequency is 150 MHz, for all of the MMC devices.
Describe that in the DT entry, to help drivers setting the right
interface frequency.
Fixes: fcfbb8d9ec ("arm64: allwinner: a100: Add MMC related nodes")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250505202416.23753-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Commit af5376a77e ("cpuidle: psci: Transition to the faux device interface")
transitioned the PSCI cpuidle driver from using a platform device to the
faux device framework. However, unlike platform devices, the faux device
infrastructure logs an error when the probe function fails, even if the
failure is intentional or expected.
To prevent unnecessary error logs, we can skip creating the faux device
entirely if there are no PSCI idle states defined in the device tree.
Introduce a check for DT idle states during initialization and avoid
setting up the device if none are found.
This ensures cleaner logs and avoids misleading probe failure messages
when PSCI idle support is intentionally not described in DT.
Fixes: af5376a77e ("cpuidle: psci: Transition to the faux device interface")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/cf4e70e4-9fe5-4697-8744-8c12c41b5ff9@nvidia.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250502140119.2578909-1-sudeep.holla@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst
Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506210935.5607-1-jason.andryuk@amd.com>
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is
currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a
xenstore stubdom, dom0 can be handled as a regular XS_HVM following the
late init path.
Ideally we'd drop the use of xen_initial_domain() and just check for the
event channel instead. However, ARM has a xen,enhanced no-xenstore
mode, where the event channel and PFN would both be 0. Retain the
xen_initial_domain() check, and use that for an additional check when
the event channel is 0.
Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off
chance that high bits are set for the 32bit event channel.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com>
AIO needs to initialize .ki_write_stream explicitly for read/write request,
otherwise random .ki_write_stream is used, and cause -EINVAL returned for
aio write randomly.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Fixes: c27683da64 ("block: expose write streams for block device nodes")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250507133328.3040255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Multishot normally uses io_req_post_cqe() to post completions, but when
stopping it, it may finish up with a deferred completion. This is fine,
except if another multishot event triggers before the deferred completions
get flushed. If this occurs, then CQEs may get reordered in the CQ ring,
as new multishot completions get posted before the deferred ones are
flushed. This can cause confusion on the application side, if strict
ordering is required for the use case.
When multishot posting via io_req_post_cqe(), flush any pending deferred
completions first, if any.
Cc: stable@vger.kernel.org # 6.1+
Reported-by: Norman Maurer <norman_maurer@apple.com>
Reported-by: Christian Mazakas <christian.mazakas@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Split out from combo patch to avoid merge conflicts ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-22-jirislaby@kernel.org
Replace the code building a bio from a kernel direct map address and
submitting it synchronously with the bdev_rw_virt helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-20-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the code building a bio from a kernel direct map address and
submitting it synchronously with the bdev_rw_virt helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bio_add_virt_nofail and bio_add_vmalloc helpers to abstract
away the details of the memory allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Delegate to bdev_rw_virt when operating on non-vmalloc memory and use
bio_add_vmalloc_chunk to insulate xfs from the details of adding vmalloc
memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it and use bio_add_vmalloc
to insulate xfs from the details of adding vmalloc memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it, and do the same for the
similar pattern using bio_add_page for adding the first segment after
a bio allocation as that can't fail either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split hib_submit_io into a sync and async version. The sync version is
a small wrapper around bdev_rw_virt which implements all the logic to
add a kernel direct mapping range to a bio and synchronously submits it,
while the async version is slightly simplified using the
bio_add_virt_nofail for adding the single range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-13-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch zonefs_read_super to allocate the superblock buffer using kmalloc
which falls back to the page allocator for PAGE_SIZE allocation but
gives us a kernel virtual address and then use bdev_rw_virt to perform
the synchronous read into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Switch gfs2_read_super to allocate the superblock buffer using kmalloc
which falls back to the page allocator for PAGE_SIZE allocation but
gives us a kernel virtual address and then use bdev_rw_virt to perform
the synchronous read into it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the bio_add_virt_nofail to add a single kernel virtual address
to a bio as that can't fail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Coly Li <colyli@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rewrite bio_map_kern using the new bio_add_* helpers and drop the
kerneldoc comment that is superfluous for an internal helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
That way the bio can be allocated with the right operation already
set and there is no need to pass the separated 'reading' argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove the q argument from blk_rq_map_kern and the internal helpers
called by it as the queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to add a vmalloc region to a bio, abstracting away the
vmalloc addresses from the underlying pages and another one wrapping
it for the simple case where all data fits into a single bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to check how many bio_vecs are needed to add a kernel
virtual address range to a bio, accounting for the always contiguous
direct mapping and vmalloc mappings that usually need a bio_vec
per page sized chunk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to perform synchronous I/O on a kernel direct map range.
Currently this is implemented in various places in usually not very
efficient ways, so provide a generic helper instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to add a directly mapped kernel virtual address to a
bio so that callers don't have to convert to pages or folios.
For now only the _nofail variant is provided as that is what all the
obvious callers want.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20250507120451.4000627-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xen swiotlb support was missed when the patch set starting with
4ab5f8ec7d ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from
ARCH_DMA_MINALIGN") was merged.
When running Xen on iMX8QXP, a SoC without IOMMU, the effect was that USB
transfers ended up corrupted when there was more than one URB inflight at
the same time.
Add a call to dma_kmalloc_needs_bounce() to make sure that allocations too
small for DMA get bounced via swiotlb.
Closes: https://lore.kernel.org/linux-usb/ab2776f0-b838-4cf6-a12a-c208eb6aad59@actia.se/
Fixes: 4ab5f8ec7d ("mm/slab: decouple ARCH_KMALLOC_MINALIGN from ARCH_DMA_MINALIGN")
Cc: stable@kernel.org # v6.5+
Signed-off-by: John Ernberg <john.ernberg@actia.se>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250502114043.1968976-2-john.ernberg@actia.se>
Commit 6cb9441bfe ("ACPI: APEI: EINJ: Transition to the faux device
interface") updated the APEI error injection driver to use the faux
device interface and now for devices that don't support ACPI, the
following error message is seen on boot:
ERR KERN faux acpi-einj: probe did not succeed, tearing down the device
The APEI error injection driver returns -ENODEV in the probe function
if ACPI is not supported and so after transitioning the driver to the
faux device interface, the error returned from the probe now causes the
above error message to be displayed.
Fix this by moving the code that detects if ACPI is supported to the
einj_init() function to fix the false error message displayed for
devices that don't support ACPI.
Fixes: 6cb9441bfe ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://patch.msgid.link/20250501124621.1251450-1-jonathanh@nvidia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The wlan_ctrl_by_user detection was introduced by commit a50bd128f2
("asus-wmi: record wlan status while controlled by userapp").
Quoting from that commit's commit message:
"""
When you call WMIMethod(DSTS, 0x00010011) to get WLAN status, it may return
(1) 0x00050001 (On)
(2) 0x00050000 (Off)
(3) 0x00030001 (On)
(4) 0x00030000 (Off)
(5) 0x00000002 (Unknown)
(1), (2) means that the model has hardware GPIO for WLAN, you can call
WMIMethod(DEVS, 0x00010011, 1 or 0) to turn WLAN on/off.
(3), (4) means that the model doesn’t have hardware GPIO, you need to use
API or driver library to turn WLAN on/off, and call
WMIMethod(DEVS, 0x00010012, 1 or 0) to set WLAN LED status.
After you set WLAN LED status, you can see the WLAN status is changed with
WMIMethod(DSTS, 0x00010011). Because the status is recorded lastly
(ex: Windows), you can use it for synchronization.
(5) means that the model doesn’t have WLAN device.
WLAN is the ONLY special case with upper rule.
"""
The wlan_ctrl_by_user flag should be set on 0x0003000? ((3), (4) above)
return values, but the flag mistakenly also gets set on laptops with
0x0005000? ((1), (2)) return values. This is causing rfkill problems on
laptops where 0x0005000? is returned.
Fix the check to only set the wlan_ctrl_by_user flag for 0x0003000?
return values.
Fixes: a50bd128f2 ("asus-wmi: record wlan status while controlled by userapp")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219786
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250501131702.103360-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
MECHREVO Wujie 14XA (GX4HRXL) wakes up immediately after s2idle entry.
This happens regardless of whether the laptop is plugged into AC power,
or whether any peripheral is plugged into the laptop.
Similar to commit a55bdad5df ("platform/x86/amd/pmc: Disable keyboard
wakeup on AMD Framework 13"), the MECHREVO Wujie 14XA wakes up almost
instantly after s2idle suspend entry (IRQ1 is the keyboard):
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 9
2025-04-18 17:23:57,588 DEBUG: PM: Triggering wakeup from IRQ 1
Add this model to the spurious_8042 quirk to workaround this.
This patch does not affect the wake-up function of the built-in keyboard.
Because the firmware of this machine adds an insurance for keyboard
wake-up events, as it always triggers an additional IRQ 9 to wake up the
system.
Suggested-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Xinhui Yang <cyan@cyano.uk>
Suggested-by: Rong Zhang <i@rong.moe>
Fixes: a55bdad5df ("platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4166
Cc: Mario Limonciello <mario.limonciello@amd.com>
Link: https://zhuanldan.zhihu.com/p/730538041
Tested-by: Yemu Lu <prcups@krgm.moe>
Signed-off-by: Runhua He <hua@aosc.io>
Link: https://lore.kernel.org/r/20250507100103.995395-1-hua@aosc.io
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Change get_thinkpad_model_data() to check for additional vendor name
"NEC" in order to support NEC Lavie X1475JAS notebook (and perhaps
more).
The reason of this works with minimal changes is because NEC Lavie
X1475JAS is a Thinkpad inside. ACPI dumps reveals its OEM ID to be
"LENOVO", BIOS version "R2PET30W" matches typical Lenovo BIOS version,
the existence of HKEY of LEN0268, with DMI fw string is "R2PHT24W".
I compiled and tested with my own machine, attached the dmesg
below as proof of work:
[ 6.288932] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[ 6.288937] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 6.288938] thinkpad_acpi: ThinkPad BIOS R2PET30W (1.11 ), EC R2PHT24W
[ 6.307000] thinkpad_acpi: radio switch found; radios are enabled
[ 6.307030] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 6.307033] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 6.320322] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 6.371963] thinkpad_acpi: secondary fan control detected & enabled
[ 6.391922] thinkpad_acpi: battery 1 registered (start 0, stop 85, behaviours: 0x7)
[ 6.398375] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input13
Signed-off-by: John Chau <johnchau@0atlas.com>
Link: https://lore.kernel.org/r/20250504165513.295135-1-johnchau@0atlas.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Oleksij Rempel says:
====================
lan78xx: preparation for PHYLINK conversion
This patch series contains the first part of the LAN78xx driver
refactoring in preparation for converting the driver to use the PHYLINK
framework.
The goal of this initial part is to reduce the size and complexity of
the final PHYLINK conversion by introducing incremental cleanups and
logical separation of concerns, such as:
- Improving error handling in the PHY initialization path
- Refactoring PHY detection and MAC-side configuration
- Moving LED DT configuration to a dedicated helper
- Separating USB link power and flow control setup from the main probe logic
- Extracting PHY interrupt acknowledgment logic
Each patch is self-contained and moves non-PHYLINK-specific logic out of
the way, setting the stage for the actual conversion in a follow-up
patch series.
changes v8 (as split from full v7 00/12 series):
- Split the original series to make review easier
- This part includes only preparation patches; actual PHYLINK
integration will follow
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
