__qla4xxx_is_chap_active() just wants to know if a session is online and
does not care about why it's not, so this has it use
iscsi_is_session_online().
This is not a bug now, but the next patch changes the behavior of
iscsi_session_chkready() so this patch just prepares the driver for that
change.
Link: https://lore.kernel.org/r/20210207044608.27585-9-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If we lose the session then relogin, but the new cmdsn window has shrunk
(due to something like an admin changing a setting) we will have the old
exp/max_cmdsn values and will never be able to update them. For example,
max_cmdsn would be 64, but if on the target the user set the window to be
smaller then the target could try to return the max_cmdsn as 32. We will
see that new max_cmdsn in the rsp but because it's lower than the old
max_cmdsn when the window was larger we will not update it.
So this patch has us reset the window values during session cleanup so they
can be updated after a new login.
Link: https://lore.kernel.org/r/20210207044608.27585-8-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We are setting the shost's can_queue after we add the host which is too
late, because the SCSI midlayer will have allocated the tag set based on
the can_queue value at that time. This patch has us use the
iscsi_host_get_max_scsi_cmds() helper to figure out the number of SCSI
cmds.
It also fixes up the template can_queue so it reflects the max SCSI cmds we
can support like how other drivers work.
Link: https://lore.kernel.org/r/20210207044608.27585-7-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch just breaks out the code that calculates the number of SCSI cmds
that will be used for a SCSI session. It also adds a check that we don't go
over the host's can_queue value.
Link: https://lore.kernel.org/r/20210207044608.27585-6-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We allocate the iSCSI host workq in iscsi_host_alloc() so iscsi_host_free()
should do the destruction. Drivers can then do their error/goto handling
and call iscsi_host_free() to clean up what has been allocated in
iscsi_host_alloc().
Link: https://lore.kernel.org/r/20210207044608.27585-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following bug was reported and debugged by wubo40@huawei.com:
When testing kernel 4.18 version, NULL pointer dereference problem occurs
in iscsi_eh_cmd_timed_out() function.
I think this bug in the upstream is still exists.
The analysis reasons are as follows:
1) For some reason, I/O command did not complete within the timeout
period. The block layer timer works, call scsi_times_out() to handle I/O
timeout logic. At the same time the command just completes.
2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic.
Although there is an NULL judgment for the task, the task has not been
released yet now.
3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count
reaches zero, the conditions for free task is met, then
iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After
iscsi_eh_cmd_timed_out() passes the task judgment check, there can still
be NULL dereference scenarios.
CPU0 CPU3
|- scsi_times_out() |-
iscsi_complete_task()
| |
|- iscsi_eh_cmd_timed_out() |-
__iscsi_put_task()
| |
|- task=sc->SCp.ptr, task is not NUL, check passed |-
iscsi_free_task(task)
| |
| |-> sc->SCp.ptr
= NULL
| |
|- task is NULL now, NULL pointer dereference |
| |
\|/ \|/
Calltrace:
[380751.840862] BUG: unable to handle kernel NULL pointer dereference at
0000000000000138
[380751.843709] PGD 0 P4D 0
[380751.844770] Oops: 0000 [#1] SMP PTI
[380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded
Tainted: G
[380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
[380751.856521] Workqueue: kblockd blk_mq_timeout_work
[380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi]
[380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85
c9 74 2c 48 39 d5 74
[380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246
[380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX:
0000000116acc580
[380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI:
ffff9fd1e4d6d420
[380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09:
0000000116acc580
[380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12:
ffff9fd1e6e931e8
[380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15:
0000000000000003
[380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000)
knlGS:0000000000000000
[380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4:
00000000003606f0
[380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[380751.893738] Call Trace:
[380751.894639] scsi_times_out+0x60/0x1c0
[380751.895861] blk_mq_check_expired+0x144/0x200
[380751.897302] ? __switch_to_asm+0x35/0x70
[380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0
[380751.900091] ? __blk_mq_requeue_request+0x100/0x100
[380751.901611] ? __switch_to_asm+0x41/0x70
[380751.902853] ? __blk_mq_requeue_request+0x100/0x100
[380751.904398] blk_mq_timeout_work+0x54/0x130
[380751.905740] process_one_work+0x195/0x390
[380751.907228] worker_thread+0x30/0x390
[380751.908713] ? process_one_work+0x390/0x390
[380751.910350] kthread+0x10d/0x130
[380751.911470] ? kthread_flush_work_fn+0x10/0x10
[380751.913007] ret_from_fork+0x35/0x40
crash> dis -l iscsi_eh_cmd_timed_out+0x15e
xxxxx/drivers/scsi/libiscsi.c: 2062
1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd
*sc)
{
...
1984 spin_lock_bh(&session->frwd_lock);
1985 task = (struct iscsi_task *)sc->SCp.ptr;
1986 if (!task) {
1987 /*
1988 * Raced with completion. Blk layer has taken
ownership
1989 * so let timeout code complete it now.
1990 */
1991 rc = BLK_EH_DONE;
1992 goto done;
1993 }
...
2052 for (i = 0; i < conn->session->cmds_max; i++) {
2053 running_task = conn->session->cmds[i];
2054 if (!running_task->sc || running_task == task ||
2055 running_task->state != ISCSI_TASK_RUNNING)
2056 continue;
2057
2058 /*
2059 * Only check if cmds started before this one have
made
2060 * progress, or this could never fail
2061 */
2062 if (time_after(running_task->sc->jiffies_at_alloc,
2063 task->sc->jiffies_at_alloc)) <---
2064 continue;
2065
...
}
carsh> struct scsi_cmnd ffff9fd1e6e931e8
struct scsi_cmnd {
...
SCp = {
ptr = 0x0, <--- iscsi_task
this_residual = 0,
...
},
}
To prevent this, we take a ref to the cmd under the back (completion) lock
so if the completion side were to call iscsi_complete_task() on the task
while the timer/eh paths are not holding the back_lock it will not be freed
from under us.
Note that this requires the previous patch, "scsi: libiscsi: Drop
taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd
is aborted. If the EH/timer and completion path are racing we don't know
which path will do the last put. The previous patch moved the operations we
needed to do under the forward lock to cleanup_queued_task. Once that has
run we can drop the forward lock for the cmd and bnx2i no longer has to
worry about if the EH, timer or completion path did the ast put and if the
forward lock is held or not since it won't be.
Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com
Reported-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The purpose of the taskqueuelock was to handle the issue where a bad target
decides to send a R2T and before its data has been sent decides to send a
cmd response to complete the cmd. The following patches fix up the
frwd/back locks so they are taken from the queue/xmit (frwd) and completion
(back) paths again. To get there this patch removes the taskqueuelock which
for iSCSI xmit wq based drivers was taken in the queue, xmit and completion
paths.
Instead of the lock, we just make sure we have a ref to the task when we
queue a R2T, and then we always remove the task from the requeue list in
the xmit path or the forced cleanup paths.
Link: https://lore.kernel.org/r/20210207044608.27585-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If iscsi_prep_scsi_cmd_pdu() fails we try to add it back to the cmdqueue,
but we leave it partially setup. We don't have functions that can undo the
pdu and init task setup. We only have cleanup_task which can clean up both
parts. So this has us just fail the cmd and go through the standard cleanup
routine and then have the SCSI midlayer retry it like is done when it fails
in the queuecommand path.
Link: https://lore.kernel.org/r/20210207044608.27585-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch removes unneeded return variables. It fixes the following
warning detected by coccinelle:
./drivers/scsi/isci/request.c:1483:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 1503
./drivers/scsi/isci/request.c:2157:17-23: Unneeded variable: "status".
Return "SCI_SUCCESS" on line 2177
Link: https://lore.kernel.org/r/1612424915-106608-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Print event counter after dumping the event history.
Link: https://lore.kernel.org/r/20210203101443.28934-1-dh0421.hwang@samsung.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following coccicheck warnings:
./drivers/scsi/qla2xxx/qla_target.c:984:12-14: WARNING !A || A && B is
equivalent to !A || B.
Link: https://lore.kernel.org/r/1612319190-111421-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eliminate the following coccicheck warning:
./drivers/target/sbp/sbp_target.c:1009:2-3: Unneeded semicolon
Link: https://lore.kernel.org/r/1612316992-71443-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a host trace buffer is released, applications never know for what
reason the buffer is released. Add a new IOCTL MPT3ADDNLDIAGQUERY to
provide the trigger information due to which the diag buffer is released.
Link: https://lore.kernel.org/r/20210204033724.1345-2-suganath-prabu.subramani@broadcom.com
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MPT Fusion adapters can steer completions to individual queues and we now
have support for shared host-wide tags in the I/O stack. The addition of
the host-wide tags allows us to enable multiqueue support for MPT Fusion
adapters. Once host-wise tags are enabled, the CPU hotplug feature is also
supported.
Allow use of host-wide tags to be disabled through the "host_tagset_enable"
module parameter. Once we do not have any major performance regressions
using host-wide tags, we will drop the hand-crafted interrupt affinity
settings.
Performance is meeting expectations. About 3.1M IOPS using 24 Drive SSD on
Aero controllers.
Link: https://lore.kernel.org/r/20210202095832.23072-1-sreekanth.reddy@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently the driver allocates memory for ReplyPostFree queues in chunks of
16. In resource constrained environments--such as VM with 1 GB RAM and 2
CPUs--memory allocation for ReplyPostFree pools may fail because the driver
tries to allocate a memory for 16 ReplyPostFree queues even though the
actual number needed is 2.
Change the driver to allocate memory for only the actual number of queues
needed if the ReplyPostFree queue count is less than 16.
Link: https://lore.kernel.org/r/20210201141522.25363-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building with 'make W=1' enables -Wpacked-not-aligned, and this warns about
pmcraid because of incompatible alignment constraints for
pmcraid_passthrough_ioctl_buffer:
drivers/scsi/pmcraid.h:1044:1: warning: alignment 1 of 'struct pmcraid_passthrough_ioctl_buffer' is less than 32 [-Wpacked-not-aligned]
1044 | } __attribute__ ((packed));
| ^
drivers/scsi/pmcraid.h:1041:24: warning: 'ioarcb' offset 16 in 'struct pmcraid_passthrough_ioctl_buffer' isn't aligned to 32 [-Wpacked-not-aligned]
1041 | struct pmcraid_ioarcb ioarcb;
The inner structure is documented as having 32 byte alignment here, but is
starts at a 16 byte offset in the outer structure, so it's never actually
aligned, as the outer structure is also marked 'packed'.
Lee Jones point this out as one of the last files that need to be changed
before the warning can be enabled by default.
Change the annotations in a way that avoids the warning but leaves the
layout unchanged, by removing the packing on the inner structure and adding
it to the outer one. The one-byte request_buffer[] array should have been a
flexible array member here, which is how I change it to avoid extra padding
from the alignment attribute.
Link: https://lore.kernel.org/r/20210204163020.3286210-1-arnd@kernel.org
Cc: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The xlnx_vcu driver is actually a clock controller driver which provides
clocks that can be used by a driver for the encoder/decoder units. There
is no reason to keep this driver in soc. Move the driver to clk.
NOTE: The register mapping actually contains registers for AXI
performance monitoring, but these are not used by the driver.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes the following checkpatch check:
CHECK: Alignment should match open parenthesis
#610: FILE: drivers/soc/xilinx/xlnx_vcu.c:610:
+ xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-15-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fixes the following checkpatch warning:
WARNING: Possible repeated word: 'the'
#703: FILE: drivers/soc/xilinx/xlnx_vcu.c:703:
+ /* Add the the Gasket isolation and put the VCU in reset. */
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-14-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This makes the register accesses more readable and is closer to what is
usually used in the kernel.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-13-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
As the consumers are now responsible for setting the clock rate via
clock framework, the clock rate is now calculated using round_rate and
the driver does not need to calculate the clock rate beforehand.
Remove the code that calculates the PLL configuration.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-12-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Do not configure the PLL when probing the driver, but register the clock
in the clock framework and do the configuration based on the respective
callbacks.
This is necessary to allow the consumers, i.e., encoder and decoder
drivers, of the xlnx_vcu clock provider to set the clock rate and
actually enable the clocks without relying on some pre-configuration.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-11-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to the downstream driver documentation due to timing
constraints the output divider of the PLL has to be set to 1/2. Add a
helper function for that check instead of burying the code in one large
setup function.
The bit is undocumented and marked as reserved in the register
reference.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-10-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The VCU System-Level Control uses an internal PLL to drive the core and
MCU clock for the allegro encoder and decoder based on an external PL
clock.
In order be able to ensure that the clocks are enabled and to get their
rate from other drivers, the module must implement a clock provider and
register the clocks at the common clock framework. Other drivers are
then able to access the clock via devicetree bindings.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-9-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently, xvcu_pll_set_rate configures the PLL to a clock rate that is
pre-calculated when probing the driver. To still make the clock
framework aware of the PLL and to allow to configure other clocks based
on the PLL rate, register the PLL as a fixed rate clock.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-8-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The disabling of the PLL is not fully implemented, because according to
the ZynqMP register reference the RESET, POR_IN and PWR_POR bits have to
be set to bring the PLL into reset.
Set the bits to disable the PLL.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-7-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The xvcu_set_vcu_pll_info function sets the rate of the PLL and enables
it, which makes it difficult to cleanly convert the driver to the common
clock framework.
Split the function and add separate functions for setting the rate,
enabling the clock and disabling the clock.
Also move the enable of the reference clock from probe to the helper
that enables the PLL.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-6-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Extract a helper function to wait until the PLL is locked. Also,
disabling the bypass was buried in the exit path on the wait loop.
Separate the different steps and add a helper function to make the code
more readable.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-5-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The coreclk field is newer read after being written to xlnx_vcu. Remove
the coreclk field from the xlnx_vcu and use a function local variable
instead.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-4-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If a driver registers a divider clock with a parent_hw instead of the
parent_name, the parent_hw is ignored and the clock does not have a
parent.
Fix this by initializing the parents the same way they are initialized
for clock gates.
Fixes: ff25881713 ("clk: divider: Add support for specifying parents via DT/pointers")
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-3-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The VCU System-Level Control has 4 output clocks. Define indexes for
these clocks to allow to reference them in the device tree.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/20210121071659.1226489-2-m.tretter@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The axi-clkgen driver now supports ZynqMP (UltraScale) as well, however the
driver needs to use different PFD & VCO limits.
For ZynqMP, these needs to be selected by using the
'adi,zynqmp-axi-clkgen-2.00.a' string.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210201151245.21845-4-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
For ZynqMP (Ultrascale) the PFD and VCO limits are different. In order to
support these, this change adds a compatible string (i.e.
'adi,zynqmp-axi-clkgen-2.00.a') which will take into account for these
limits and apply them.
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Mathias Tausen <mta@gomspace.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210201151245.21845-3-alexandru.ardelean@analog.com
Acked-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The intent is to be able to run this driver to access the IP core in setups
where FPGA board is also connected via a PCIe bus. In such cases the number
of combinations explodes, where the host system can be an x86 with Xilinx
Zynq/ZynqMP/Microblaze board connected via PCIe.
Or even a ZynqMP board with a ZynqMP/Zynq/Microblaze connected via PCIe.
To accommodate for these cases, this change removes the limitation for this
driver to be compilable only on Zynq/Microblaze architectures.
And adds dependencies on the mechanisms required by the driver to work (OF
and HAS_IOMEM).
Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210201151245.21845-2-alexandru.ardelean@analog.com
Acked-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In sd_probe(), print a warning if CONFIG_BLK_DEV_ZONED is disabled and a
TYPE_ZBC device is found. While at it, use IS_ENABLED() to test if
CONFIG_BLK_DEV_ZONED is enabled instead using of a #ifdef.
Link: https://lore.kernel.org/r/20210128055658.530133-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This final patch adds the ZONED incompat flag to the supported flags
and enables to mount ZONED flagged file system.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since the zoned filesystem requires sequential write out of metadata, we
cannot proceed with a hole in tree-log pages. When such a hole exists,
btree_write_cache_pages() will return -EAGAIN. This happens when someone,
e.g., a concurrent transaction commit, writes a dirty extent in this
tree-log commit.
If we are not going to wait for the extents, we can hope the concurrent
writing fills the hole for us. So, we can ignore the error in this case and
hope the next write will succeed.
If we want to wait for them and got the error, we cannot wait for them
because it will cause a deadlock. So, let's bail out to a full commit in
this case.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 3/3 patch to enable tree-log on zoned filesystems.
The allocation order of nodes of "fs_info->log_root_tree" and nodes of
"root->log_root" is not the same as the writing order of them. So, the
writing causes unaligned write errors.
Reorder the allocation of them by delaying allocation of the root node of
"fs_info->log_root_tree," so that the node buffers can go out sequentially
to devices.
Cc: Filipe Manana <fdmanana@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 2/3 patch to enable tree-log on zoned filesystems.
Since we can start more than one log transactions per subvolume
simultaneously, nodes from multiple transactions can be allocated
interleaved. Such mixed allocation results in non-sequential writes at
the time of a log transaction commit. The nodes of the global log root
tree (fs_info->log_root_tree), also have the same problem with mixed
allocation.
Serializes log transactions by waiting for a committing transaction when
someone tries to start a new transaction, to avoid the mixed allocation
problem. We must also wait for running log transactions from another
subvolume, but there is no easy way to detect which subvolume root is
running a log transaction. So, this patch forbids starting a new log
transaction when other subvolumes already allocated the global log root
tree.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is the 1/3 patch to enable tree log on zoned filesystems.
The tree-log feature does not work on a zoned filesystem as is. Blocks for
a tree-log tree are allocated mixed with other metadata blocks and btrfs
writes and syncs the tree-log blocks to devices at the time of fsync(),
which has a different timing than a global transaction commit. As a
result, both writing tree-log blocks and writing other metadata blocks
become non-sequential writes that zoned filesystems must avoid.
Introduce a dedicated block group for tree-log blocks, so that tree-log
blocks and other metadata blocks can be separate write streams. As a
result, each write stream can now be written to devices separately.
"fs_info->treelog_bg" tracks the dedicated block group and assigns
"treelog_bg" on-demand on tree-log block allocation time.
This commit extends the zoned block allocator to use the block group.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is a preparation patch for the next patch. Split alloc_log_tree()
into two parts. The first one allocating the tree structure, remains in
alloc_log_tree() and the second part allocating the tree node, which is
moved into btrfs_alloc_log_tree_node().
Also export the latter part is to be used in the next patch.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a bad checksum is found and if the filesystem has a mirror of the
damaged data, we read the correct data from the mirror and writes it to
damaged blocks. This however, violates the sequential write constraints
of a zoned block device.
We can consider three methods to repair an IO failure in zoned filesystems:
(1) Reset and rewrite the damaged zone
(2) Allocate new device extent and replace the damaged device extent to
the new extent
(3) Relocate the corresponding block group
Method (1) is most similar to a behavior done with regular devices.
However, it also wipes non-damaged data in the same device extent, and
so it unnecessary degrades non-damaged data.
Method (2) is much like device replacing but done in the same device. It
is safe because it keeps the device extent until the replacing finish.
However, extending device replacing is non-trivial. It assumes
"src_dev->physical == dst_dev->physical". Also, the extent mapping
replacing function should be extended to support replacing device extent
position in one device.
Method (3) invokes relocation of the damaged block group and is
straightforward to implement. It relocates all the mirrored device
extents, so it potentially is a more costly operation than method (1) or
(2). But it relocates only used extents which reduce the total IO size.
Let's apply method (3) for now. In the future, we can extend device-replace
and apply method (2).
For protecting a block group gets relocated multiple time with multiple
IO errors, this commit introduces "relocating_repair" bit to show it's
now relocating to repair IO failures. Also it uses a new kthread
"btrfs-relocating-repair", not to block IO path with relocating process.
This commit also supports repairing in the scrub process.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently fallocate() is disabled on a zoned filesystem. Since current
relocation process relies on preallocation to move file data extents, it
must be handled differently.
On a zoned filesystem, we just truncate the inode to the size that we
wanted to pre-allocate. Then, we flush dirty pages on the file before
finishing the relocation process. run_delalloc_zoned() will handle all
the allocations and submit IOs to the underlying layers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This is 4/4 patch to implement device-replace on zoned filesystems.
Even after the copying is done, the write pointers of the source device
and the destination device may not be synchronized. For example, when
the last allocated extent is freed before device-replace process, the
extent is not copied, leaving a hole there.
Synchronize the write pointers by writing zeroes to the destination
device.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>