[ Upstream commit c378c497f3 ]
The Device Under Test should always be the local system.
While the Rx test gets this right the Tx test is sending
from remote to local. So Tx of DMABUF memory happens on remote.
These tests never run in NIPA since we don't have a compatible
device so we haven't caught this.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 424e96de30 ]
We need to use bracketed IPv6 addresses for socat.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250811231334.561137-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57af162bfc ]
Some kfd ioctls may not be available depending on the kernel version the
user is running, as such we need to report -ENOTTY so userland can
determine the cause of the ioctl failure.
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58de1f91e0 ]
The register REG_SYS_CFG1 is used to determine chip basic information
as arguments of following flows, such as download firmware and load PHY
parameters, so driver read the value early (before power-on).
However, the direct IO is disallowed before power-on, or it causes wrong
values, which driver recognizes a chip as a wrong type RF_1T1R, but
actually RF_2T2R, causing driver warns:
rtw88_8822cs mmc1:0001:1: unsupported rf path (1)
Fix it by using indirect IO before power-on.
Reported-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/699C22B4-A3E3-4206-97D0-22AB3348EBF6@gmail.com/T/#t
Suggested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250724004815.7043-1-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e1c44fe4c ]
When driver receives new or unknown C2H events, it print out messages
repeatedly once events are received, like
rtw89_8922ae 0000:81:00.0: PHY c2h class 2 not support
To avoid the thousands of messages, use rtw89_info_once() instead. Also,
print out class/func for unknown (undefined) class.
Reported-by: Sean Anderson <sean.anderson@linux.dev>
Closes: https://lore.kernel.org/linux-wireless/20250729204437.164320-1-sean.anderson@linux.dev/
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250804012234.8913-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4c0a48bd ]
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Signed-off-by: Wake Liu <wakel@google.com>
Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36748e873 ]
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27738c3003 ]
Always set the RMDevidCheckIgnore registry key for GSP-RM so that it
will continue support newer variants of already supported GPUs.
GSP-RM maintains an internal list of PCI IDs of GPUs that it supports,
and checks if the current GPU is on this list. While the actual GPU
architecture (as specified in the BOOT_0/BOOT_42 registers) determines
how to enable the GPU, the PCI ID is used for the product name, e.g.
"NVIDIA GeForce RTX 5090".
Unfortunately, if there is no match, GSP-RM will refuse to initialize,
even if the device is fully supported. Nouveau will get an error
return code, but by then it's too late. This behavior may be corrected
in a future version of GSP-RM, but that does not help Nouveau today.
Fortunately, GSP-RM supports an undocumented registry key that tells it
to ignore the mismatch. In such cases, the product name returned will
be a blank string, but otherwise GSP-RM will continue.
Unlike Nvidia's proprietary driver, Nouveau cannot update to newer
firmware versions to keep up with every new hardware release. Instead,
we can permanently set this registry key, and GSP-RM will continue
to function the same with known hardware.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250808191340.1701983-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc7086b39 ]
RDC PCI to PCIe bridges, present on Vortex86DX3 and Vortex86EX2 SoCs, do
not support MSIs. If enabled, interrupts generated by PCIe devices never
reach the processor.
I have contacted the manufacturer (DM&P) and they confirmed that PCI MSIs
need to be disabled for them.
Signed-off-by: Marcos Del Sol Vives <marcos@orca.pet>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20250705233209.721507-1-marcos@orca.pet
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 136c374d8c ]
Use DRM's shadow-plane helper to map and access the GEM object's buffer
within kernel address space. Encapsulates the vmap logic in the GEM-DMA
helpers.
The sharp-memory driver currently reads the vaddr field from the GME
buffer object directly. This only works because GEM code 'automagically'
sets vaddr.
Shadow-plane helpers perform the same steps, but with correct abstraction
behind drm_gem_vmap(). The shadow-plane state provides the buffer address
in kernel address space and the format-conversion state.
v2:
- fix typo in commit description
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250627152327.8244-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc973dcd73 ]
While we do need at least 3.6 for kernel-doc to work, and at least
3.7 for it to output functions and structs with parameters at the
right order, let the python binary be compatible with legacy
versions.
The rationale is that the Kernel build nowadays calls kernel-doc
with -none on some places. Better not to bail out when older
versions are found.
With that, potentially this will run with python 2.7 and 3.2+,
according with vermin:
$ vermin --no-tips -v ./scripts/kernel-doc
Detecting python files..
Analyzing using 24 processes..
2.7, 3.2 /new_devel/v4l/docs/scripts/kernel-doc
Minimum required versions: 2.7, 3.2
3.2 minimal requirement is due to argparse.
The minimal version I could check was version 3.4
(using anaconda). Anaconda doesn't support 3.2 or 3.3
anymore, and 3.2 doesn't even compile (I tested compiling
Python 3.2 on Fedora 42 and on Fedora 32 - no show).
With 3.4, the script didn't crash and emitted the right warning:
$ conda create -n py34 python=3.4
$ conda activate py34
python --version
Python 3.4.5
$ python ./scripts/kernel-doc --none include/media
Error: Python 3.6 or later is required by kernel-doc
$ conda deactivate
$ python --version
Python 3.13.5
$ python ./scripts/kernel-doc --none include/media
(no warnings and script ran properly)
Supporting 2.7 is out of scope, as it is EOL for 5 years, and
changing shebang to point to "python" instead of "python3"
would have a wider impact.
I did some extra checks about the differences from 3.2 and
3.4, and didn't find anything that would cause troubles:
grep -rE "yield from|asyncio|pathlib|async|await|enum" scripts/kernel-doc
Also, it doesn't use "@" operator. So, I'm confident that it
should run (producing the exit warning) since Python 3.2.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/87d55e76b0b1391cb7a83e3e965dbddb83fa9786.1753806485.git.mchehab+huawei@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17593a69b7 ]
For non-leaf paging structures we end up selecting a random index
between [0, 3], depending on the first user if the page-table is shared,
since non-leaf structures only have two bits in the HW for encoding the
PAT index, and here we are just passing along the full user provided
index, which can be an index as large as ~31 on xe2+. The user provided
index is meant for the leaf node, which maps the actual BO pages where
we have more PAT bits, and not the non-leaf nodes which are only mapping
other paging structures, and so only needs a minimal PAT index range.
Also the chosen index might need to consider how the driver mapped the
paging structures on the host side, like wc vs wb, which is separate
from the user provided index.
With that move the PDE PAT index selection under driver control. For now
just use a coherent index on platforms with page-tables that are cached
on host side, and incoherent otherwise. Using a coherent index could
potentially be expensive, and would be overkill if we know the page-table
is always uncached on host side.
v2 (Stuart):
- Add some documentation and split into separate helper.
BSpec: 59510
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250808103455.462424-2-matthew.auld@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7496c15d8 ]
[Why]
Customer reported an issue that OS starts and stops device multiple times
during driver installation. Frequently disabling and enabling OTG may
prevent OTG from being safely disabled and cause incorrect configuration
upon the next enablement.
[How]
Add a wait until OTG_CURRENT_MASTER_EN_STATE is cleared as a short term
solution.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: TungYu Lu <tungyu.lu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31f486bc8 ]
User queues are disabled before GEM objects are released
(protecting against user app crashes).
No races with PCI hot-unplug (because drm_dev_enter prevents cleanup
if iewdevice is being removed).
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad335b5fc9 ]
[WHY&HOW]
The user closed the lid while the system was powering on and opened it
again before the “apply_seamless_boot_optimization” was set to false,
resulting in the eDP remaining blank.
Reset the “apply_seamless_boot_optimization” to false when dpms off.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Danny Wang <Danny.Wang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ed2dca4df ]
The SND_JACK_AVOUT is a more specific jack type for HDMI and DisplayPort.
Updatae the MediaTek drivers to use such jack type, allowing system to
determine the device type based on jack event.
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20250723-mtk-hdmi-v1-1-4ff945eb6136@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e83dcd139e ]
Since version 0x105, the keyword 'init' was introduced into the profile,
which is used for chip initialization, particularly to store common
settings for other non-initialization profiles.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250803131110.1443-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6510b62fe9 ]
snprintf() returns the number of characters that *would* have been
written, which can overestimate how much you actually wrote to the
buffer in case of truncation. That leads to 'data += this' advancing
the pointer past the end of the buffer and size going negative.
Switching to scnprintf() prevents potential buffer overflows and ensures
consistent behavior when building the output string.
Signed-off-by: Seyediman Seyedarab <ImanDevel@gmail.com>
Link: https://lore.kernel.org/r/20250724195913.60742-1-ImanDevel@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad69d62588 ]
Previously, the LMTT directory pointer was only programmed for primary GT
within a tile. However, to ensure correct Local Memory access by VFs,
the LMTT configuration must be programmed on all GTs within the tile.
Lets program the LMTT directory pointer on every GT of the tile
to guarantee proper LMEM access across all GTs on VFs.
HSD: 18042797646
Bspec: 67468
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250805091850.1508240-1-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e7581eda8 ]
Acquire jpeg_pg_lock before changes to jpeg power state
and release it after power off from idle work handler.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2b48f2b30 ]
The suspend and resume callbacks for pm and runtime pm should be same.
During suspending, it needs to stop all hardware contexts first. And
the hardware contexts will be restarted after the device is resumed.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20250803191450.1568851-1-lizhi.hou@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f3b1ccf83 ]
Cached metrics data validity is 1ms on arcturus. It's not reasonable for
any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e87577ef6d ]
Cached metrics data validity is 1ms on aldebaran. It's not reasonable
for any client to query gpu_metrics at a faster rate and constantly
interrupt PMFW.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e72fdba8a ]
[Why]
The reason some high-resolution monitors fail to display properly
is that this platform does not support sufficiently high DPP and
DISP clock frequencies
[How]
Update DISP and DPP clocks from the smu clock table then DML can
filter these mode if not support.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Paul Hsieh <Paul.Hsieh@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c210b757b4 ]
Accessing DC from amdgpu_dm is usually preceded by acquisition of
dc_lock mutex. Most of the DC API that DM calls are under a DC lock.
However, there are a few that are not. Some DC API called from interrupt
context end up sending DMUB commands via a DC API, while other threads were
using DMUB. This was apparent from a race between calls for setting idle
optimization enable/disable and the DC API to set vmin/vmax.
Offload the call to dc_stream_adjust_vmin_vmax() to a thread instead
of directly calling them from the interrupt handler such that it waits
for dc_lock.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba5e322b26 ]
On multi-vf setup if the VM have two vf assigned, perhaps from two
different gpus, mgpu fan boost will fail.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf06bd4cf ]
Add PCI IDs to support display probe for cyan skillfish
family of SOCs.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6c2b0f232 ]
Add a new API amdgpu_xcp_drm_dev_free().
After unplug xcp device, need to release xcp drm memory etc.
Co-developed-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da46735229 ]
Move amdgpu_device_health_check into amdgpu_device_gpu_recover to
ensure that if the device is present can be checked before reset
The reason is:
1.During the dpc event, the device where the dpc event occurs is not
present on the bus
2.When both dpc event and ATHUB event occur simultaneously,the dpc thread
holds the reset domain lock when detecting error,and the gpu recover thread
acquires the hive lock.The device is simultaneously in the states of
amdgpu_ras_in_recovery and occurs_dpc,so gpu recover thread will not go to
amdgpu_device_health_check.It waits for the reset domain lock held by the
dpc thread, but dpc thread has not released the reset domain lock.In the dpc
callback slot_reset,to obtain the hive lock, the hive lock is held by the
gpu recover thread at this time.So a deadlock occurred
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21c0ffa612 ]
Try to ensure poison creation handle is completed in time
to set device rma value.
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f0245ee95 ]
Update the IPID register value for bad page threshold CPER according to
the latest definition.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e3967a71e ]
The variable `pm_suspend_target_state` is conditionally defined only when
`CONFIG_SUSPEND` is enabled (see `include/linux/suspend.h`). Directly
referencing it without guarding by `#ifdef CONFIG_SUSPEND` causes build
failures when suspend functionality is disabled (e.g., `CONFIG_SUSPEND=n`).
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd9f22144 ]
The PF's restart worker shouldn't attempt to resume the device on
its own, since its goal is to finish PF and VFs reprovisioning on
the recently reset GuC. Take extra RPM reference while scheduling
a work and release it from the worker or when we cancel a work.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-4-michal.wajdeczko@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cda3c755b ]
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250715152057.23254-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fbb51050 ]
The GuC load process will abort if certain status codes (which are
indicative of a fatal error) are reported. Otherwise, it keeps waiting
until the 'success' code is returned. New error codes have been added
in recent GuC releases, so add support for aborting on those as well.
v2: Shuffle HWCONFIG_START to the front of the switch to keep the
ordering as per the enum define for clarity (review feedback by
Jonathan). Also add a description for the basic 'invalid init data'
code which was missing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250726024337.4056272-1-John.C.Harrison@Intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5b69101f9 ]
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 327aba7f55 ]
[why & how]
Header misalignment in struct dmub_cmd_replay_copy_settings_data and
struct dmub_alpm_auxless_data causes incorrect data read between driver
and dmub.
Fix the misalignment and ensure that everything is aligned to 4-byte
boundaries.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3419e1e44 ]
[WHY]
In the worst case, AUX intra-hop done can take hundreds of milliseconds as
each retimer in a link might have to wait a full AUX_RD_INTERVAL to send
LT abort downstream.
[HOW]
Wait 300ms for each retimer in a link to allow time to propagate a LT abort
without infinitely waiting on intra-hop done.
For no-retimer case, keep the max duration at 10ms.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2681bf4ae8 ]
[WHY]
If symclk RCO is enabled, stream encoder may not be receiving an ungated
clock by the time we attempt to set stream attributes when setting dpms
on. Since the clock is gated, register writes to the stream encoder fail.
[HOW]
Move set_stream_attribute call into enable_stream, just after the point
where symclk32_se is ungated.
Logically there is no need to set stream attributes as early as is
currently done in link_set_dpms_on, so this should have no impact beyond
the RCO fix.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faab5ea083 ]
Log an error when vcn sram load fails in indirect mode
and return the same error value.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca74cc428f ]
[Why]
When transitioning between topologies such as multi-display to single
display ODM 2:1, pipes might not be freed before use.
[How]
In dc_commit_streams, commit an additional, minimal transition if
original transition is not seamless to ensure pipes are freed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a6a3374ec ]
timing_adjust_pending is used to defer certain programming sequences
when OTG timing is about to be changed, like with VRR. Insufficient
checking for timing change in this case caused a regression which
reduces PSR Replay residency.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
