Commit graph

361,091 commits

Author SHA1 Message Date
Rafał Miłecki
1fd41a65f1 bcma: change delays to follow timers-howto guide
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28 13:54:02 -04:00
John W. Linville
f1b98bb367 Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx 2012-09-28 13:49:21 -04:00
Trond Myklebust
0cac120233 NFSv4: Ensure that idmap_pipe_downcall sanity-checks the downcall data
Use the idmapper upcall data to verify that the legacy idmapper daemon
is indeed responding to an upcall that we sent.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
2012-09-28 13:43:34 -04:00
Trond Myklebust
e9ab41b620 NFSv4: Clean up the legacy idmapper upcall
Replace the BUG_ON(idmap->idmap_key_cons != NULL) with a
WARN_ON_ONCE(). Then get rid of the ACCESS_ONCE(idmap->idmap_key_cons).

Then add helper functions for starting, finishing and aborting the
legacy upcall.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>
2012-09-28 13:42:41 -04:00
Jason Gerecke
5e056ef4dd Input: wacom - mark Intuos5 pad as in-prox when touching buttons
If the ExpressKeys on the Intuos5 are touched, they currently result
an out-of-prox packet being sent even if the pad is already out of
prox. This can cause some confusion in the X driver. To restore the
expected semantics, we make being touched a sufficient condition to
signal proximity.

https://bugs.freedesktop.org/show_bug.cgi?id=54250

Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-28 10:34:03 -07:00
Seth Forshee
824efd3741 Input: synaptics - adjust threshold for treating position values as negative
Commit c039450 (Input: synaptics - handle out of bounds values from the
hardware) caused any hardware reported values over 7167 to be treated as
a wrapped-around negative value. It turns out that some firmware uses
the value 8176 to indicate a finger near the edge of the touchpad whose
actual position cannot be determined. This value now gets treated as
negative, which can cause pointer jumps and broken edge scrolling on
these machines.

I only know of one touchpad which reports negative values, and this
hardware never reports any value lower than -8 (i.e. 8184). Moving the
threshold for treating a value as negative up to 8176 should work fine
then for any hardware we currently know about, and since we're dealing
with unspecified behavior it's probably the best we can do. The special
8176 value is also likely to result in sudden jumps in position, so
let's also clamp this to the maximum specified value for the axis.

BugLink: http://bugs.launchpad.net/bugs/1046512
https://bugzilla.kernel.org/show_bug.cgi?id=46371

Cc: stable@vger.kernel.org
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Alan Swanson <swanson@ukfsn.org>
Tested-by: Arteom <arutemus@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-28 10:33:57 -07:00
Linus Torvalds
6672d90fe7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David S Miller:

 1) Netfilter xt_limit module can use uninitialized rules, from Jan
    Engelhardt.

 2) Wei Yongjun has found several more spots where error pointers were
    treated as NULL/non-NULL and vice versa.

 3) bnx2x was converted to pci_io{,un}map() but one remaining plain
    iounmap() got missed.  From Neil Horman.

 4) Due to a fence-post type error in initialization of inetpeer entries
    (which is where we store the ICMP rate limiting information), we can
    erroneously drop ICMPs if the inetpeer was created right around when
    jiffies wraps.

    Fix from Nicolas Dichtel.

 5) smsc75xx resume fix from Steve Glendinnig.

 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.

 7) qlcnic uses msleep() with locks held, fix from Narendra K.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netdev: octeon: fix return value check in octeon_mgmt_init_phy()
  inetpeer: fix token initialization
  qlcnic: Fix scheduling while atomic bug
  bnx2: Clean up remaining iounmap
  net: phy: smsc: Implement PHY config_init for LAN87xx
  smsc75xx: fix resume after device reset
  netdev: pasemi: fix return value check in pasemi_mac_phy_init()
  team: fix return value check
  l2tp: fix return value check
  netfilter: xt_limit: have r->cost != 0 case work
2012-09-28 10:09:33 -07:00
Linus Torvalds
7596824e66 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
 "A couple of fixes; one for automount/lazy umount race, another a
  classic "we don't protect the refcount transition to zero with the
  lock that protects looking for object in hash" kind of crap in lockd."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  close the race in nlmsvc_free_block()
  do_add_mount()/umount -l races
2012-09-28 10:02:53 -07:00
Linus Torvalds
97956605d8 Merge branch 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML fixes from Richard Weinberger.

* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Preinclude include/linux/kern_levels.h
  um: Fix IPC on um
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  um: don't leak floating point state and segment registers on execve()
  um: take cleaning singlestep to start_thread()
2012-09-28 10:00:52 -07:00
Linus Torvalds
c3a086e638 A few fixes for problems discovered during the 3.6 cycle.
Of particular note, are fixes to the thin target's discard support,
 which I hope is finally working correctly; and fixes for multipath
 ioctls and device limits when there are no paths.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQY5sSAAoJEK2W1qbAHj1nUKwP/RDEYw6o4WWvnMvMtyhapPaM
 yInBlep/TSr4mA7QPoe0zV9G8guZoZZaeGEgP/T4Je//ZBqw1xhEG6RIVEAgEUh/
 GrJvfYGXYoLhUiCg99vR1oWT5hQvQp8SYG9lJ1+AsjqEgVwBj7uKgl2wmmvars9X
 gPzXqqzv2IlQjhu6eLvShUixk4HFTQfPMDGaPGWWV8nNcWc0Pnb5TVZiuMeNJGrf
 Srem0ScRNF6P9stUqMA93kHp2KRKHwP6kelnuok9CW/RfcNnux1+8015DXcdbOr9
 X1+mi6VIL0Hjp5R/io0FE1YdJDyR6U/Rwjo3jHkblnegRMOMnK3bOTHmhepW/HUe
 Mav9gcXvEXNpqEvQJsaRmhR36ZgJan5mpxaSTeK1HcPuP0wePEN9Lh/ZJDY7oaB1
 33ntNV8LFIj4jXOcIJZkyAf9l/RdI7mAZ4HwNxPiNncG7LSNataguKYA1sZw9/E8
 njBbn9PyDl/arXQVCJa5ARa2hOHqtNViNGqqNVjQ6ySJuz1HgzslXqzPVG/geZQd
 yPs3ylkMNl+vbCZaEDwkuuEpOeiMgNo1BxVuhGuJMIe5Fs1lsjWbUnvwT9a0XsCQ
 fDPFAFZOfb3Xn6AV0za1SyIVgvsHoX8COBViPh8m+PaXgyTB2wf+vkgRMgwAhBRR
 IV5v+oWZSL8ayoe5okEv
 =J1f2
 -----END PGP SIGNATURE-----

Merge tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm

Pull dm fixes from Alasdair G Kergon:
 "A few fixes for problems discovered during the 3.6 cycle.

  Of particular note, are fixes to the thin target's discard support,
  which I hope is finally working correctly; and fixes for multipath
  ioctls and device limits when there are no paths."

* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm verity: fix overflow check
  dm thin: fix discard support for data devices
  dm thin: tidy discard support
  dm: retain table limits when swapping to new table with no devices
  dm table: clear add_random unless all devices have it set
  dm: handle requests beyond end of device instead of using BUG_ON
  dm mpath: only retry ioctl when no paths if queue_if_no_path set
  dm thin: do not set discard_zeroes_data
2012-09-28 10:00:01 -07:00
Trond Myklebust
0e24d849c4 NFSv4: Remove BUG_ON() and ACCESS_ONCE() calls in the idmapper
The use of ACCESS_ONCE() is wrong, since the various routines that set/clear
idmap->idmap_key_cons should be strictly ordered w.r.t. each other, and
the idmap->idmap_mutex ensures that only one thread at a time may be in
an upcall situation.

Also replace the BUG_ON()s with WARN_ON_ONCE() where appropriate.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2012-09-28 12:27:11 -04:00
Andrei Emeltchenko
9cb23dd4b6 Bluetooth: btmrvl: Fix skb buffer overflow
Add extra check to avoid skb buffer overflow. Fixes crash below:

 [  101.030427] ------------[ cut here ]------------
 [  101.030459] kernel BUG at net/core/skbuff.c:127!
 [  101.030486] invalid opcode: 0000 [#1] SMP
...
 [  101.030806] Pid: 2010, comm: btmrvl_main_ser Not tainted 3.5.0+ #80 Laptop
 [  101.030859] EIP: 0060:[<c14f2ba9>] EFLAGS: 00010282 CPU: 0
 [  101.030894] EIP is at skb_put+0x99/0xa0
 [  101.030919] EAX: 00000080 EBX: f129380b ECX: ef923540 EDX: 00000001
 [  101.030956] ESI: f00a4000 EDI: 00001003 EBP: ed4a5efc ESP: ed4a5ecc
 [  101.030992]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
 [  101.031024] CR0: 8005003b CR2: 08fca014 CR3: 30960000 CR4: 000407f0
 [  101.031062] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
 [  101.031100] DR6: ffff0ff0 DR7: 00000400
 [  101.031125] Process btmrvl_main_ser (pid: 2010, ti=ed4a4000 task=ef923540 task.ti=ed4a4000)
 [  101.031174] Stack:
 [  101.031188]  c18126f8 c1651938 f853f8d2 00001003 00001003 f1292800 f1292808 f129380b
 [  101.031250]  f1292940 f00a4000 eddb1280 efc0f9c0 ed4a5f44 f853f8d2 00000040 00000000
 [  101.031312]  ef923540 c15ee096 ef923540 eddb12d4 00000004 f00a4000 00000040 00000000
 [  101.031376] Call Trace:
 [  101.031396]  [<f853f8d2>] ? btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
 [  101.031444]  [<f853f8d2>] btmrvl_sdio_process_int_status+0x272/0x3d0 [btmrvl_sdio]
 [  101.031488]  [<c15ee096>] ? _raw_spin_unlock_irqrestore+0x36/0x70
 [  101.031526]  [<f85a46e4>] btmrvl_service_main_thread+0x244/0x300 [btmrvl]
 [  101.031568]  [<f853fb50>] ? btmrvl_sdio_poll_card_status.isra.6.constprop.7+0x90/0x90 [btmrvl_sdio]
 [  101.031619]  [<c107eda0>] ? try_to_wake_up+0x270/0x270
 [  101.031648]  [<f85a44a0>] ? btmrvl_process_event+0x3b0/0x3b0 [btmrvl]
 [  101.031686]  [<c106d19d>] kthread+0x7d/0x90
 [  101.031713]  [<c106d120>] ? flush_kthread_work+0x150/0x150
 [  101.031745]  [<c15f5a82>] kernel_thread_helper+0x6/0x10
...
 [  101.032008] EIP: [<c14f2ba9>] skb_put+0x99/0xa0 SS:ESP 0068:ed4a5ecc
 [  101.056125] ---[ end trace a0bd01d1a9a796c8 ]---

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28 12:57:18 -03:00
Andrei Emeltchenko
e678bad515 Bluetooth: btmrvl: Use DIV_ROUND_UP macro
The kernel.h macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) / (d))

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28 12:55:31 -03:00
Andrei Emeltchenko
42632805f5 Bluetooth: btmrvl: Correct num_block name
Make code readable by correcting name from buf_block_len to num_blocks
since it represent number of blocks; NOT a length of a block buffer.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28 12:55:25 -03:00
Joerg Roedel
bdddadcb07 iommu/amd: Report irq remapping through IOMMU-API
Report the availability of irq remapping through the
IOMMU-API to allow KVM device passthrough again without
additional module parameter overrides.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:54 +02:00
Joerg Roedel
ebe60bbfdc iommu/amd: Print message to system log when irq remapping is enabled
Print an indicator to dmesg to easily find out if interrupt
remapping is enabled of a given system.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:54 +02:00
Joerg Roedel
c18d238817 iommu/irq: Use amd_iommu_irq_ops if supported
Finally enable interrupt remapping for AMD systems.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:53 +02:00
Joerg Roedel
d04e0ba343 iommu/amd: Make sure irq remapping still works on dma init failure
Do not deinitialize the AMD IOMMU driver completly when
interrupt remapping is already in use but the initialization
of the DMA layer fails for some reason. Make sure the IOMMU
can still be used to remap interrupts.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:53 +02:00
Joerg Roedel
6b474b8224 iommu/amd: Add initialization routines for AMD interrupt remapping
Add the six routines required to setup interrupt remapping
with the AMD IOMMU. Also put it all together into the AMD
specific irq_remap_ops.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:52 +02:00
Joerg Roedel
d976195c93 iommu/amd: Add call-back routine for HPET MSI
Add a routine to setup a HPET MSI interrupt for remapping.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:52 +02:00
Joerg Roedel
0b4d48cb22 iommu/amd: Implement MSI routines for interrupt remapping
Add routines to setup interrupt remapping for MSI
interrupts.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:51 +02:00
Joerg Roedel
5527de744d iommu/amd: Add IOAPIC remapping routines
Add the routine to setup interrupt remapping for ioapic
interrupts. Also add a routine to change the affinity of an
irq and to free an irq allocation for interrupt remapping.
The last two functions will also be used for MSI interrupts.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:51 +02:00
Joerg Roedel
2b32450634 iommu/amd: Add routines to manage irq remapping tables
Add routines to:

* Alloc remapping tables and single entries from these
  tables
* Change entries in the tables
* Free entries in the table

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:43:50 +02:00
Joerg Roedel
7ef2798deb iommu/amd: Add IRTE invalidation routine
Add routine to invalidate the IOMMU cache for interupt
translations. Also include the IRTE caches when flushing all
IOMMU caches.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:41:22 +02:00
Andrea Arcangeli
99a1300e1d thp: avoid VM_BUG_ON page_count(page) false positives in __collapse_huge_page_copy
Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-09-28 08:38:09 -07:00
Joerg Roedel
f6fec00a92 iommu/amd: Make sure IOMMU is not considered to translate itself
The IVRS table usually includes the IOMMU device. But the
IOMMU does never translate itself, so make sure the IOMMU
driver knows this.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:33:28 +02:00
Joerg Roedel
33f28c59e1 iommu/amd: Split device table initialization into irq and dma part
When the IOMMU is enabled very early (as with irq-remapping)
some devices are still in BIOS hand. When dma is blocked
early this can cause lots of IO_PAGE_FAULTs. So delay the
DMA initialization and do it right before the dma_ops are
initialized.
To be secure, block all interrupts by default when irq-remapping is
enabled in the system. They will be reenabled on demand
later. Without blocking interrupts by default devices can
issue arbitrary interrupts by sending special DMA packets to
the CPU that look like MSI messages. This is especially
dangerous when a device is assigned to a KVM guest because
the guest can then DoS the host.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:31:41 +02:00
Joerg Roedel
eb1eb7ae65 iommu/amd: Check if IOAPIC information is correct
When the IOAPIC information provided in the IVRS table is
not correct or not complete the system may not boot at all
when interrupt remapping is enabled. So check if this
information is correct and print out a firmware bug message
when it is not.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:31:09 +02:00
Joerg Roedel
0ea2c422bc iommu/amd: Allocate data structures to keep track of irq remapping tables
To easily map device ids to interrupt remapping table
entries a new lookup table is necessary.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:30:04 +02:00
Joerg Roedel
05152a0494 iommu/amd: Add slab-cache for irq remapping tables
The irq remapping tables for the AMD IOMMU need to be
aligned on a 128 byte boundary. Create a seperate slab-cache
to guarantee this alignment.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 17:30:03 +02:00
Joerg Roedel
6efed63bec iommu/amd: Keep track of HPET and IOAPIC device ids
The IVRS ACPI table provides information about the IOAPICs
and the HPETs available in the system and which PCI device
ID they use in transactions. Save that information for later
usage in interrupt remapping.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-28 17:29:34 +02:00
Andrei Emeltchenko
13465c0aeb Bluetooth: A2MP: Correct assoc_len size
Correct assoc_len and fix warning for x86-64 by using %zu specifier.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28 12:18:49 -03:00
Andrei Emeltchenko
2e430be386 Bluetooth: Use %zu print specifier for size_t type
Correct warnings

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-09-28 12:18:22 -03:00
John W. Linville
c487606f83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
Conflicts:
	net/nfc/netlink.c

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28 11:11:16 -04:00
Vijay Purushothaman
17dc92574b drm/i915: Fixup HDMI output on Valleyview
Fixed correct min, max vco limits and dip ctl reg

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 17:05:08 +02:00
Gajanan Bhat
19c03924d4 drm/i915: Add eDP support for Valleyview
Eventhough Valleyview display block is derived from Cantiga, VLV
supports eDP. So, added eDP checks in i9xx_crtc_mode_set path.

v2: use different DPIO_DIVISOR values for VGA, DP and eDP
v3: fix DPIO value calculation to use same values for all display
interfaces
v4: removed unconditional enabling of 6bpc dithering based on comments
from Daniel & Jani Nikula. Also changed the display enabling order to
force eDP detection first.

Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 17:04:38 +02:00
Vijay Purushothaman
2a8f64ca23 drm/i915: Enable DisplayPort in Valleyview
In valleyview voltageswing, pre-emphasis and lane control registers can
be programmed only through the h/w side band fabric.

Cleaned up DPLL calculations for Valleyview to support multi display
configurations.

v2: Based on Daniel's feedbacak, moved crt hotplug detect work around as separate
patch. Also moved i9xx_update_pll_dividers to i8xx_update_pll and
i9xx_update_pll.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Gajanan Bhat <gajanan.bhat@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[danvet: drop spurious whitespace changes.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 17:02:08 +02:00
John W. Linville
97ea6d0f3e The 2nd NFC pull request for 3.7.
- A couple of wrong context sleep fixes.
 - An LLCP rwlock intizialisation fix.
 - A missing mutex unlocking for pn533.
 - LLCP raw sockets support. This is going to be used for NFC sniffing.
 - A build fix for llc_shdlc. It fixes a build error triggered by code that's
   living in wireless-next.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQZBXfAAoJEIqAPN1PVmxKl2sP/RUgpUq4z818mVpt0+PydhRX
 l2XqxQ33H/4QN+Hq/o2W2yKYvn4onePOB/n67f9o/N6R4q1jO1TbunTfiRg7s9Nl
 K3qV7no+aiQM+X+XFeJc3zvNK1b5vRPMctdqWhUabCAWzMttc+pc9l3X/2Ovi85I
 EIf6lGO7oeXk2CDuQifJwr65AcFgFENGTN9iYbryd4CdLGRS7JXNYB/zGsIUDCq0
 kqPO2EKJ3C8YsfSRc5c++lHYRPkxPSqQ9mQSmmuYEsuHzgynezq5mDQmL67N2wZV
 skErLv4KrcEW1NP/f2q+HLxoskFmX/+5qj0tTGHxLYM2y2LdVkCDhTOhss3J/7sf
 VXt4jssSiV4doDtd70SAMk5XGYPA8VrFcjEN6V4//+2YtQY4jNCkJcmdo6cgEAke
 0+5QilnNzNQZtSW1CMZF0iMzO1gkfs5pjnDIg/Oxb68W1lmMhdVxZLYnL3GF6mw5
 Vc70aK7lbTDxJNlhKFt9c4RKHkqM4TGnfTKz8WPF12Vv2JqDBIcqh1llD/jcJs+s
 HHr/S8XWjOLTI8YlPrXr3UvJyGoz3S51l3f9IaB3TFt/8MdiLZoy/cwn61h50NZl
 LLdwVDtg16EDzHQkckLPZDGbpoCSHLTfA5KqS2/V1iQjHiwDzqKxR+DzoEGev1yn
 9ZhMNvRZ34B2hN3IZZlj
 =Jv+B
 -----END PGP SIGNATURE-----

Merge tag 'nfc-next-3.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0

So says Samuel Ortiz <sameo@linux.intel.com>:

The 2nd NFC pull request for 3.7.

- A couple of wrong context sleep fixes.
- An LLCP rwlock intizialisation fix.
- A missing mutex unlocking for pn533.
- LLCP raw sockets support. This is going to be used for NFC sniffing.
- A build fix for llc_shdlc. It fixes a build error triggered by code that's
  living in wireless-next.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28 10:55:43 -04:00
Vijay Purushothaman
74a4dd2e45 drm/i915: Program correct m n tu register for Valleyview
m n tu register offset has changed in Valleyview. Also fixed DP limit
frequencies.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 16:49:53 +02:00
Vijay Purushothaman
b56747aace drm/i915: Add Valleyview lane control definitions
Added DPIO data lane register definitions for Valleyview

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 16:48:27 +02:00
Vijay Purushothaman
ae33cdcfc6 drm/i915: Fix SDVO IER and status bits for Valleyview
Fixed SDVOB and SDVOC bit definitions for Valleyview.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 16:46:55 +02:00
Vijay Purushothaman
9473c8f485 drm/i915: Set aux clk to 100MHz for Valleyview
Set hrawclk to 200 MHz and aux divider clock to 100 MHz for Valleyview.
This enables the aux transactions in Valleyview.

Signed-off-by: Vijay Purushothaman <vijay.a.purushothaman@intel.com>
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-28 16:42:52 +02:00
Ralf Baechle
cb418b34ca Merge branch 'ralf-3.7' of git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next 2012-09-28 16:29:55 +02:00
Borislav Petkov
500c25edda iommu/amd: Fix features reporting
When the AMD IOMMU doesn't have extended features, an empty line
gets issued in dmesg like so:

[    3.061417] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    3.066757] 							<---
[    3.068294] pci 0000:00:00.2: irq 72 for MSI/MSI-X
[    3.081213] AMD-Vi: Lazy IO/TLB flushing enabled

Fix it.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 16:27:36 +02:00
Ralf Baechle
77a0d763c4 Merge branch 'rixi-3.7' of git://git.linux-mips.org/pub/scm/sjhill/linux-sjhill into mips-for-linux-next 2012-09-28 16:25:52 +02:00
Joerg Roedel
0774e39255 iommu/amd: Fix wrong assumption in iommu-group specific code
The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.

Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.

Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-09-28 16:14:44 +02:00
Mark Brown
6a2027abd2 Merge remote-tracking branches 'regulator/topic/core', 'regulator/topic/bypass', 'regulator/topic/tol', 'regulator/topic/drivers' and 'regulator/topic/tps6586x' into regulator-next 2012-09-28 14:45:07 +01:00
Mark Brown
e96961dabe regulator: arizona-ldo: Remove top voltage
The highest voltage step is not supported.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28 14:44:11 +01:00
Ashish Chavan
9911f7f756 ASoC: codecs: Add DA9055 codec driver
This patch adds support for Dialog semiconductor's DA9055 audio codec.

This has been tested on DA9055 EVB with Samsung SMDK6410 board.

Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <david.chen@diasemi.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28 14:21:54 +01:00
Fabio Estevam
da75c92487 ASoC: eukrea-tlv320: Convert it to platform driver
Convert eukrea-tlv320 to platform driver.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-28 14:12:52 +01:00