macb_pad_and_fcs() appends the FCS in place when the skb has tailroom.
A shared skb, as pktgen sends in clone_skb mode, grows by one FCS per
transmit. BQL then completes more bytes than were queued and
dql_completed() hits its BUG_ON.
On a Raspberry Pi CM5 (RP1 GEM) pktgen with clone_skb 1000 burst 32 at
60 bytes kills the box within seconds.
Copy shared skbs before appending the FCS. Clearing IFF_TX_SKB_SHARING
would also fix it but makes pktgen refuse clone_skb on macb.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20261006-nb-macb-shared-skb-net-v1-2-a80641479041@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macb_pad_and_fcs() replaces or extends the skb before the ring space
check. On NETDEV_TX_BUSY the stack requeues an skb that is already freed
or grown.
Check the ring first, using the padded length for the descriptor count.
Nonlinear skbs always take the copy path so the count can assume a
linear skb.
Fixes: 653e92a917 ("net: macb: add support for padding and fcs computation")
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20261006-nb-macb-shared-skb-net-v1-1-a80641479041@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the closure of a datagram socket, the vmci_transport_recv_dgram_cb()
function may be called, which will add the packets
to the socket's backlog; then, after the receive queue is cleared,
the __release_sock() function will move the packet back from the socket's
backlog to the receive queue, which will lead to a memory leak.
sock_close
__sock_release
__vsock_release
// take ownership by user-space
lock_sock_nested
sock_set_flag(sk, SOCK_DEAD)
vmci_transport_release
vmci_dispatch_dgs
vmci_datagram_invoke_guest_handler
vmci_transport_recv_dgram_cb
sk_receive_skb
if (!sock_owned_by_user(sk))
[...]
(!) else if sk_add_backlog()
[...]
(!) skb_queue_purge(&sk->sk_receive_queue)
release_sock
__release_sock
// move all packets from the backlog
// to the receive queue
(!) sk_backlog_rcv
vsock_queue_rcv_skb
[...]
__sock_queue_rcv_skb
if (!sock_flag(sk, SOCK_DEAD))
// Since the socket is "dead", the function will not
// be called
sk->sk_data_ready(sk)
sock_release_ownership(sk);
sock_put
Add a receive queue cleanup in the socket destructor to fix this.
syzkaller report:
unreferenced object 0xffff8880117bfb80 (size 240):
comm "irq/56-vmw_vmci", pid 205, jiffies 4295064448 (age 73.992s)
hex dump (first 32 bytes):
78 dc 26 1e 80 88 ff ff 78 dc 26 1e 80 88 ff ff x.&.....x.&.....
00 00 00 00 00 00 00 00 c0 da 26 1e 80 88 ff ff ..........&.....
backtrace:
[<ffffffff82be8d97>] __alloc_skb+0x287/0x330 net/core/skbuff.c:505
[<ffffffffa114bcbd>] vmci_transport_recv_dgram_cb+0xbd/0x210 [vmw_vsock_vmci_transport]
[<ffffffffa05072c6>] vmci_datagram_invoke_guest_handler+0x366/0x450 [vmw_vmci]
[<ffffffffa050ad75>] vmci_dispatch_dgs+0x235/0x490 [vmw_vmci]
[<ffffffffa050b025>] vmci_interrupt+0x55/0x290 [vmw_vmci]
[<ffffffff8137ad2b>] irq_thread_fn+0x8b/0x1a0 kernel/irq/manage.c:1205
[<ffffffff8137c7ae>] irq_thread+0x28e/0x530 kernel/irq/manage.c:1314
[<ffffffff81253dd6>] kthread+0x2e6/0x3a0 kernel/kthread.c:376
[<ffffffff81004392>] ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:295
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with Syzkaller.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20261008144046.90853-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason A. Donenfeld says:
====================
WireGuard fixes for 7.3-rc7
This series contains two important WireGuard fixes
1) Stop zeroing out skb->tstamp_type when encapsulating packets, so that
fq behaves correctly, from Ramses de Norre.
2) Make sure handshake state isn't swapped out while locks are
released, reported by Jérémy Jean.
====================
Link: https://patch.msgid.link/20261008130124.724119-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two threads begin processing the identical response message, received
twice. The first thread, A, runs. While it's running, the second one,
B, gets partway through, and during that slow calculation, or even while
blocking on down_write(), A completes and then also a handshake
initiation that's already been queued up runs in thread C, which itself
takes that same down_write(). The handshake initiation creation
succeeds, and sets the state back to waiting-for-response, and calls
up_write(), at which point thread B resumes, because either its finished
its calculations or was finally allowed to acquire down_write(). Thread
B then copies the state back to the peer, and begins a new session,
using that state, which is the same session as the one made in thread A.
Thread A Thread B Thread C
down_read()
sA = handshake->state
memcpy(cA, handshake->crypto)
up_read()
if (sA != 1)
goto fail
slow_crypto(cA)
down_read()
sB = handshake->state
memcpy(cB, handshake->crypto)
up_read()
if (sB != 1)
goto fail
slow_crypto(cB)
down_write()
if (sA != handshake->state)
goto fail
memcpy(handshake->crypto, cA)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
down_write()
slow_crypto(handshake->crypto)
handshake->state = 1
up_write()
down_write()
if (sB != handshake->state)
goto fail
memcpy(handshake->crypto, cB)
handshake->state = 2
up_write()
down_write()
if (handshake->state != 2)
goto fail
derive_session(handshake->crypto)
up_write()
This seems basically impossible to hit in a meaningful way in practice,
but ensure that it absolutely cannot happen by comparing the ephemeral
private key that's on the stack with the latest one that the peer's
handshake state has.
Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Reported-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20261008130124.724119-4-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sending traffic through a wireguard tunnel on a host using the fq
qdisc fills the log with:
fq: likely mono tstamp with tstamp_type 0
An skb carries a timestamp in skb->tstamp and, separately, a
skb->tstamp_type field recording which clock that timestamp came from.
The two have to agree.
When wireguard encapsulates a packet it calls wg_reset_packet(), which
clears the fields that must not leak from the inner packet into the
tunnel packet. It does so in two steps:
skb_scrub_packet(skb, true);
memset(&skb->headers, 0, sizeof(skb->headers));
skb_scrub_packet() deliberately keeps skb->tstamp when it holds a
monotonic timestamp: that value is the time the packet is scheduled to
be sent, and the qdisc still needs it. The memset then zeroes
skb->tstamp_type, because that field sits inside the headers group
while skb->tstamp does not. The packet therefore leaves wireguard
carrying a monotonic timestamp labelled as a realtime one.
Nothing noticed until commit c4f796c4f1 ("net_sched: sch_fq: convert
skb->tstamp if not monotonic"): fq used to assume every timestamp was
monotonic. It now consults tstamp_type, spots the mismatch, warns, and
falls back to treating the value as monotonic. Pacing still ends up
correct, so the log spam is the actual problem.
Save tstamp_type before the memset and restore it when encapsulating,
next to the hash fields that are already carried over this way. When
decapsulating it stays zeroed, which is right: an incoming packet's
timestamp is a realtime receive timestamp.
Fixes: d98d58a002 ("net: Set skb->mono_delivery_time and clear it after sch_handle_ingress()")
Signed-off-by: Ramses de Norre <ramses@well-founded.dev>
Reviewed-by: Toke Høiland-Jørgensen <toke@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20261008130124.724119-3-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When executing IPv6 address rewrite actions on IPv6 fragments,
set_ipv6_addr() calls update_ipv6_checksum(). If parse_ipv6hdr()
processes a non-first IPv6 fragment, it sets key->ip.proto to
NEXTHDR_FRAGMENT and returns early without calling
skb_set_transport_header().
update_ipv6_checksum() unconditionally evaluates skb_transport_offset()
on entry before checking l4_proto. Because skb->transport_header is
uninitialized, this triggers a warning under CONFIG_DEBUG_NET=y although
it is completely harmless.
Fix this by returning early in update_ipv6_checksum() if l4_proto is
NEXTHDR_FRAGMENT. This avoids reading the uninitialized transport offset
for fragments while preserving the debug warning for any other protocol
where the transport header is unexpectedly missing.
See the syzbot trace:
!skb_transport_header_was_set(skb)
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_header include/linux/skbuff.h:3075 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at skb_transport_offset include/linux/skbuff.h:3250 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at update_ipv6_checksum net/openvswitch/actions.c:361 [inline], CPU#1: syz-executor463/5635
WARNING: ./include/linux/skbuff.h:3075 at set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399, CPU#1: syz-executor463/5635
[...]
RIP: 0010:skb_transport_header include/linux/skbuff.h:3075 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:3250 [inline]
RIP: 0010:update_ipv6_checksum net/openvswitch/actions.c:361 [inline]
RIP: 0010:set_ipv6_addr+0x462/0x660 net/openvswitch/actions.c:399
[...]
Call Trace:
<TASK>
set_ipv6 net/openvswitch/actions.c:531 [inline]
do_execute_actions+0x557e/0x8600 net/openvswitch/actions.c:1366
ovs_execute_actions+0xde/0x520 net/openvswitch/actions.c:1592
ovs_packet_cmd_execute+0xb4f/0xf10 net/openvswitch/datapath.c:705
genl_family_rcv_msg_doit+0x233/0x340 net/netlink/genetlink.c:1114
genl_rcv_msg+0x614/0x7a0 net/netlink/genetlink.c:1209
netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2572
genl_rcv+0x28/0x40 net/netlink/genetlink.c:1218
netlink_unicast+0x7bd/0x940 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1916
sock_sendmsg_nosec+0x14e/0x190 net/socket.c:800
Reported-by: syzbot+4cc63fcfb3845e149969@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=4cc63fcfb3845e149969
Fixes: 3fdbd1ce11 ("openvswitch: add ipv6 'set' action")
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20261008104135.4722-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_getname() dereferences smc->clcsock without holding
clcsock_release_lock. Link-group termination can release the CLC socket
through smc_close_active_abort() while the SMC socket is still open,
for example after shutdown(SHUT_WR).
A getsockname() caller can load smc->clcsock, then the termination worker
can clear the pointer and call sock_release() before the caller accesses
clcsock->ops or invokes getname(). This causes a use-after-free; if the
worker clears the pointer before the load, it causes a NULL dereference.
The syscall's file reference keeps the SMC socket alive but does not
prevent asynchronous release of its CLC socket.
KASAN reported the following with test-only timing instrumentation:
BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0
Read of size 8 at addr ffff888109abb4e0 by task poc/103
Call Trace:
smc_getname+0x19e/0x1b0
do_getsockname+0xe5/0x170
__sys_getsockname+0x8c/0x100
Allocated by task 95:
sock_alloc_inode+0x1e/0x280
sock_alloc+0x3d/0x240
__sock_create+0x7e/0x430
smc_create+0x121/0x240
Freed by task 0:
kmem_cache_free+0xcc/0x340
rcu_core+0x50a/0x1850
Last potentially related work creation:
evict+0x446/0x6c0
smc_clcsock_release+0xa8/0xd0
smc_close_active_abort+0x26a/0x3a0
__smc_lgr_terminate.part.0+0x137/0x2e0
Hold clcsock_release_lock across the pointer check and the getname()
callback to serialize with smc_clcsock_release(). Return -EBADF if the
CLC socket has already been released, preserving the existing peer
state check and the callback's return value otherwise.
Fixes: b03faa1faf ("net/smc: postpone release of clcsock")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Link: https://patch.msgid.link/20261008084444.787449-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daehyeon Ko says:
====================
ipv4/ipv6: do not warn on route notification size races
A nexthop group can grow between route notification sizing and filling.
Both IPv4 and IPv6 can then legitimately return -EMSGSIZE, so remove the
stale warnings while preserving their existing error paths.
Patch 1 is unchanged from v1. Patch 2 adds the IPv6 counterpart requested
by Ido. No new build or runtime test was run; both changes only delete the
stale comment and WARN_ON().
====================
Link: https://patch.msgid.link/cover.1791423190.git.4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners.
Fixes: 907eea4868 ("net: ipv6: Emit notification when fib hardware flags are changed")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/netdev/20261007114003.GA1011260@shredder/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
Link: https://patch.msgid.link/4012604727e5ba80b69ccd4d08796511397ddaef.1791423190.git.4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 680aea08e7 ("net: ipv4: Emit notification when fib hardware
flags are changed") added asynchronous route notifications for hardware
flag changes.
fib_alias_hw_flags_set() sizes the skb with fib_nlmsg_size() and later
fills it with fib_dump_info() while holding only RCU. With nexthop
compatibility mode enabled, a concurrent replacement can grow the group
between these independent snapshots. fib_dump_info() can then
legitimately return -EMSGSIZE, so the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners.
Fixes: 680aea08e7 ("net: ipv4: Emit notification when fib hardware flags are changed")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/netdev/20261004082043.GB92032@shredder/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
Link: https://patch.msgid.link/b7e203fc5867651cb67ef84aa03e082f0f76008e.1791423190.git.4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a packet with bad checksum metadata gets into the ipv4 stack,
skb_checksum_help can corrupt the network header and cause a bunch of
mischief.
This was discovered and reported by Paulos, and has been reporoduced
by others independently since.
We really shouldn't allow such packets in, but as a defence
in depth measure, let's also check before we complete the checksum.
A more complete validation at input is forthcoming, but needs more work.
Cc: stable@vger.kernel.org
Fixes: f43798c276 ("tun: Allow GSO using virtio_net_hdr")
Fixes: bfd5f4a3d6 ("packet: Add GSO/csum offload support.")
Reported-by: Paulos Yibelo <habte.yibelo@gmail.com>
Closes: https://lore.kernel.org/netdev/20260922030310.8684-2-habte.yibelo@gmail.com/
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/0a012b4923e189c4c593ef4f471e5ff0edbe9030.1791412497.git.mst@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit in fixes introduced a high cap for delayas U64_MAX value
while ktime_t is actually s64. This is wrong cap as it becomes negative
value and any comparison to a real delay will fail to update delay
value. Use KTIME_MAX constant as correct max cap for PCIe delay.
The issue was hit in production (a negative value is observed):
# cat /sys/class/timecard/ocp0/ts_window_adjust
-3
Fixes: aa05fe67bc ("ptp: ocp: Improve PCIe delay estimation")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20261007203359.417270-1-vadim.fedorenko@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a response chain has more slots than fit in the skb's frags,
xennet_fill_frags() returns an error and xennet_poll() jumps to its
error path. That path moves what's left on tmpq to errq to be freed,
but the skb being filled was already dequeued from tmpq, so it's never
freed. Each chain that overflows leaks the skb and the pages attached
to it as frags, and the backend decides how many slots it sends.
Put the skb back on tmpq before taking the error path, like the
xennet_set_skb_gso() failure just above it does.
Fixes: ad4f15dc2c ("xen/netfront: don't bug in case of too many frags")
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/20261007-b4-xen-netfront-fill-frags-leak-v1-1-a8a01ff9cd52@toxicpanda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SOCK_RAW packet sockets incorrectly drop VLAN-tagged GSO packets
without VIRTIO_NET_HDR_F_NEEDS_CSUM.
packet_parse_headers() sets skb->protocol to VLAN but advances
skb->network_header past the VLAN tags. virtio_net_hdr_to_skb()
then flow dissects these packets, which parses the network header as a
VLAN tag, and fails.
Call packet_parse_headers() after virtio_net_hdr_to_skb() instead.
This matches tun_get_user() and tap_get_user() and thus simplifies
overall complexity.
Commit 01fdecc048 ("net: packet: fix wrong transport_header when
sending VLAN-tagged frame") fixed the same issue for the transport
header probe in packet_parse_headers(). That probe is now skipped if
virtio_net_hdr_to_skb() already set the transport header, avoiding a
redundant dissection.
Implementation details:
- Do not set skb->protocol to the RX wildcard ETH_P_ALL. SOCK_RAW then
derives it from the link layer header, as before. SOCK_DGRAM now
leaves it 0, or derives it from gso_type for GSO with NEEDS_CSUM.
- Keep virtio_net_hdr_set_proto() last, so that the link layer protocol
takes priority over gso_type.
Reported-by: Junnan Zhang <zhangjn_dev@163.com>
Closes: https://lore.kernel.org/netdev/20260821085722.24036-1-zhangjn_dev@163.com/
Fixes: dfed913e8b ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20261007175816.3138556-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
handle_incoming_queue() pulls pull_to bytes into the head before
calling eth_type_trans(). pull_to is the length of the first RX slot,
capped at RX_COPY_THRESHOLD, and that length comes from the backend.
Nothing checks it against ETH_HLEN.
If the first slot is shorter than ETH_HLEN and more slots follow, the
head ends up shorter than an Ethernet header while skb->len is longer,
and eth_type_trans() BUG()s in __skb_pull(). If the whole packet is
shorter than ETH_HLEN, eth_type_trans() reads the header past the end
of the data instead.
Pull at least ETH_HLEN, and drop the packet if that fails, which also
drops packets too short to hold an Ethernet header. This also checks
the return value of the pull, which was ignored.
Fixes: 0d16021196 ("xen: add virtual network device driver")
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://patch.msgid.link/20261007-b4-xen-netfront-short-head-v1-1-12d7113a7e4e@toxicpanda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset().
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20261007-b4-skb-copy-csum-stale-bytes-v1-1-adbbde033fb3@toxicpanda.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak.
Cc: stable@vger.kernel.org
Fixes: 1ede4acf04 ("net: sparx5: add bookkeeping code for matchall rules")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20261007-sparx5-matchall-kfree-net-v1-1-c8918685b337@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Fix port range register leak
When the mlxsw driver parses a port range template rule, it acquires the
actual port range registers. The parsing is only done to determine the
element usage, so the registers can be deallocated right away, but this is
never done, and the registers are leaked. Plug this leak and add a selftest
that would have caught it.
====================
Link: https://patch.msgid.link/cover.1791294384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test that creates a tc chain template matching on both source and
destination port ranges and verifies via devlink-resource occupancy that
this does not leak port range registers, neither while the template
exists nor after it is deleted.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/e7b37b80adb7ac8b0ef20a22d7654a6656c1c545.1791294384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_sp_flower_tmplt_create() parses a flow_cls_offload template
into a stack-local struct mlxsw_sp_acl_rule_info purely to compute
rulei.values.elusage. Parsing can acquire port range registers via
mlxsw_sp_flower_parse_ports_range(), but since this rulei never goes
through mlxsw_sp_acl_rulei_destroy(), those registers were never
released, including through chain template deletion.
Factor out of mlxsw_sp_acl_rulei_destroy() the code to actually
release the necessary resources and call from
mlxsw_sp_flower_tmplt_create() to plug the leak.
The issue was found during a review of Wentao Liang's patch referenced
below.
Fixes: fe22f74105 ("mlxsw: spectrum_flower: Add ability to match on port ranges")
Reported-by: Wentao Liang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/netdev/20260917113236.2149095-1-vulab@iscas.ac.cn/
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/95339cf970ce78e1a74aa86ffcc104ecf7c7762c.1791294384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KSZ8765 is similar to the KSZ8795 but has two fiber ports.
KSZ8_PORT_STATUS_0 is used to detect fiber mode. It is currently
defined as 0x08, which is the Global Control 6 MIB Control register
and has bit 7 defined as Flush Counter.
Set KSZ8_PORT_STATUS_0 to 0x18, which is the Port 1 Status 0 register
where bit 7 is the Fiber Mode bit.
This issue was discovered when upgrading an embedded device from kernel
5.10 to 6.16. The device was using a KSZ8765 device tree configuration
and the corresponding hardware, but during boot the kernel incorrectly
detected it as a KSZ8795. The relevant boot messages were:
ksz-switch spi0.0: found switch: KSZ8795, rev 0
ksz-switch spi0.0: Device tree specifies chip KSZ8765 but found KSZ8795, please fix it!
Cc: stable@vger.kernel.org
Fixes: 91a98917a8 ("net: dsa: microchip: move switch chip_id detection to ksz_common")
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Sebastien Royen <sebastien.royen@armadeus.com>
Link: https://patch.msgid.link/20261007080557.15719-1-sebastien.royen@armadeus.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_poll_ico_cq() requires sq->cc to be updated only after
mlx5_cqwq_update_db_record(), otherwise a CQ overrun may occur.
The current implementation updates sq->cc before the CQ doorbell
record, violating this ordering requirement.
Update the CQ doorbell record first and use dma_wmb() before updating
sq->cc. This ensures that the CQ space is released to the device
before the corresponding ICOSQ consumer index is updated by software.
Fixes: fd9b4be800 ("net/mlx5e: RX, Support multiple outstanding UMR posts")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20261006105820.257208-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tianyi Gao says:
====================
veth: fix peer NETDEV_XDP_ACT_NDO_XMIT after GRO is toggled while down
Toggling GRO on a veth device while it is down leaves its peer's
NETDEV_XDP_ACT_NDO_XMIT flag stale once the device comes up. XDP
redirects into the peer are then rejected with -EOPNOTSUPP, or, if GRO
was turned off, accepted and then dropped with -ENXIO. Patch 1 refreshes
the peer's flags in veth_open().
Patch 2 extends veth.sh to check the peer's flag after GRO is toggled
while the device is down, in both directions.
====================
Link: https://patch.msgid.link/20261006173241.65945-1-tianyi@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that toggling GRO on a veth device while it is down updates the
peer's ndo-xmit XDP feature once the device comes up, for both GRO on
and GRO off.
xdp-features is only visible through netlink, so read it with the ynl
CLI, as double_udp_encap.sh does. Skip the checks if the CLI is not
found, as in an installed kselftest tree.
Signed-off-by: Tianyi Gao <tianyi@cloudflare.com>
Link: https://patch.msgid.link/20261006173241.65945-3-tianyi@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A veth device advertises NETDEV_XDP_ACT_NDO_XMIT only if its peer has an
XDP program attached or GRO enabled, that is, only if the peer will have
NAPI to receive the frames.
veth_set_features() updates the peer's flag when GRO is toggled, but
returns early if the device is down, and veth_open() only refreshes the
flags of the device being opened. Toggling GRO while the device is down
therefore leaves the peer's flag stale after the device comes up.
If GRO was enabled while down, the device comes up with NAPI but the
peer does not advertise NDO_XMIT, and devmap rejects redirects to the
peer with -EOPNOTSUPP. If GRO was disabled while down, the device comes
up without NAPI but the peer still advertises NDO_XMIT, so redirects are
accepted and then dropped in veth_xdp_xmit() with -ENXIO.
Commit 7a6102aa6d ("veth: Update XDP feature set when bringing up
device") made veth_open() refresh the device's own flags. Refresh the
peer's flags there too. The peer's flag depends on this device's XDP
program and GRO setting, not on whether the peer is up, so it is
correct to set it even if the peer is down.
Fixes: 8267fc71ab ("veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag")
Signed-off-by: Tianyi Gao <tianyi@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Lorenzo Bianconi <lorenzo.bianconi@oss.qualcomm.com>
Link: https://patch.msgid.link/20261006173241.65945-2-tianyi@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 730ff06d3f ("net: mana: Use page pool fragments for RX buffers
instead of full pages to improve memory efficiency.") started handing
out RX buffers with zero headroom so that two buffers fit into one page
at the default MTU.
The MANA TX path, however, stores the per scatter-gather entry DMA
mappings in `struct mana_skb_head` at skb->head, and mana_start_xmit()
therefore calls skb_cow_head(skb, MANA_HEADROOM). The port advertises
this requirement as ndev->needed_headroom = MANA_HEADROOM.
As a result every packet that is received and then forwarded out of a
MANA port fails the skb_cow() in ip_forward() and gets reallocated and
copied by pskb_expand_head(). This is invisible to a plain RX or TX
workload, but it puts a full skb reallocation plus memcpy on the hot
path of every single forwarded packet, which is exactly what a
router/NVA workload does.
Restore the headroom. Note that reserving MANA_HEADROOM (232) is not
enough: ip_forward() asks for LL_RESERVED_SPACE(dev), which rounds
hard_header_len + needed_headroom up to HH_DATA_MOD and is 256 bytes on
ethernet. Use LL_RESERVED_SPACE() directly so the value keeps tracking
both constants. Also, since LL_RESERVED_SPACE() tracks MANA_HEADROOM,
it grows with MAX_SKB_FRAGS and for MAX_SKB_FRAGS >= 19 it is greater
than 256, so we have to account for that by using the headroom the RX
queue actually uses (instead of assuming XDP_PACKET_HEADROOM) and
turning MANA_XDP_MTU_MAX into MANA_XDP_MTU_MAX(ndev) (note that at the
default CONFIG_MAX_SKB_FRAGS=17 they are equivalent).
At the default MTU on a 4K page this means a buffer no longer fits twice
into a page (SKB_DATA_ALIGN(1500 + MANA_RXBUF_PAD + 256) = 2112), so the
frag-vs-single decision is now made by computing the real buffer size
instead of comparing the MTU against PAGE_SIZE / 2. The page_pool
fragment path is still used wherever at least two buffers genuinely fit,
e.g. on 16K and 64K page sizes.
Measured on an Azure VM with a MANA NIC acting as a forwarding NVA (UDP,
1400 byte payload, 4 streams, 8 Gbps offered, only the forwarding
node's kernel differs), 8 runs each, median:
forwarded pps throughput
before 272,830 3.06 Gbps
after 390,560 4.37 Gbps (+43%)
perf on the forwarding node, same workload:
memset_orig __pi_memcpy pskb_expand_head
before 10.07% 3.96% present
after 0.94% 0.64% gone
Cc: stable@vger.kernel.org
Fixes: 730ff06d3f ("net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.")
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20261003013647.2051416-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
cipso_v4_skbuff_delattr() removes the CIPSO bytes but does not adjust
cached offsets for options that follow them.
For example, with a valid 10-byte CIPSO option followed by a seven-byte
RR option, parsing records rr at offset 30. Removing CIPSO moves RR to
offset 20, while the cached offset remains 30. Consumers such as
ip_forward_options() and __ip_options_echo() then access the wrong bytes;
the latter may interpret packet data as the option length and copy it into
fixed-size option storage.
Mirror cipso_v4_delopt() and subtract cipso_len from the srr, rr, ts and
router_alert offsets when they follow CIPSO. cipso_len is the distance
the first memmove() shifts those options. The later header move and
network-header reset relocate the bytes and their offset base together.
Fixes: 89aa3619d1 ("cipso: make cipso_v4_skbuff_delattr() fully remove the CIPSO options")
Cc: stable@vger.kernel.org
Reviewed-by: Ondrej Mosnáček <omosnacek@gmail.com>
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20261006035108.3101440-1-4ncienth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bareudp_xmit_skb() sets the inner protocol of the skb to the configured
ethertype, and bareudp6_xmit_skb() does not set it at all. The inner
protocol is used by skb_udp_tunnel_segment() to segment the inner packet
when GSO has to be done in software, for instance when the lower device
does not offload the checksum.
With multiproto, an IPv4 device also carries IPv6, so the IPv6 header
is parsed as an IPv4 one. With IPv6 underlay, the inner protocol is
whatever the skb had before. In both cases segmentation fails and the
packets are dropped. With veth tx checksum offload disabled, iperf3 TCP
over bareudp gets about 10 Mbit/s with thousands of retransmits instead
of about 700 Mbit/s for IPv6 over IPv4 and for both families over IPv6,
while IPv4 over IPv4 works.
At this point skb->protocol is the protocol of the inner packet, which
bareudp_xmit() has already checked against the configuration, so use it
on both paths.
Fixes: 571912c69f ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Fixes: 4b5f67232d ("net: Special handling for IP & MPLS.")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20261002153039.462663-1-yanhaishuang@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Javier reports seeing packet loss issues related to the re-enablement
of K1; disabling it makes the issues go away. Add the reported system
to have K1 disabled by default.
Reproduction steps (from the Link):
Plug the cable and ping the default gateway on the LAN. No suspend/resume
involved, machine freshly booted and on AC power. Nothing e1000e-related in
dmesg apart from the link up/down messages; no "Hardware Unit Hang".
Default (K1 enabled):
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 18 received, 40% packet loss, time 29734ms
rtt min/avg/max/mdev = 0.211/0.315/0.384/0.046 ms
The lost packets are spread over the run (seq 6, 8, 9, 11, 13, 14, 16, 19,
20, 24, 25, 30), not a single burst. DHCP on this link also takes 1-2
minutes to get a lease, consistent with incoming packets being dropped.
With K1 disabled at runtime:
# ethtool --set-priv-flags enp0s31f6 disable-k1 on
$ ethtool --show-priv-flags enp0s31f6
Private flags for enp0s31f6:
s0ix-enabled: on
disable-k1 : on
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 30 received, 0% packet loss, time 29713ms
rtt min/avg/max/mdev = 0.169/0.251/0.468/0.054 ms
$ ping -c 30 192.168.10.1
--- 192.168.10.1 ping statistics ---
30 packets transmitted, 30 received, 0% packet loss, time 29677ms
rtt min/avg/max/mdev = 0.101/0.222/0.360/0.064 ms
I have only compile tested this, but Javier has tested that disabling K1
on his system (Lenovo ThinkPad P14s Gen 5 (Intel), I219-LM [8086:550a])
resolves his issues.
Cc: stable@vger.kernel.org
Fixes: 578294b8b6 ("e1000e: Reconfigure PLL clock gate timeout and re-enable K1 on Meteor Lake")
Reported-by: Javier Herrera <javier.herrera@afronta.com>
Link: https://lore.kernel.org/intel-wired-lan/CAKRuCQLWEcci9hPgNUmvq44Bd2H30T5_vP=exMjsknXMN5Yh9A@mail.gmail.com/
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20261001222443.3500206-7-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bpf_flow_dissect() sanitizes the offsets returned by the BPF program
with clamp_t(u16, ..., hlen).
If hlen is bigger than 65535, the upper bound is truncated before
the comparison. For instance, with hlen == 65536, both nhoff and
thoff are forced to zero, even if the program returned sane values.
This is the same class of bug as the one fixed in commit 99bda1ecbd
("flow_dissector: avoid u16 truncation of skb->len when computing
thoff"). That fix does not cover the BPF path, because
__skb_flow_dissect() returns early when a BPF flow dissector
handles the packet.
struct bpf_flow_keys stores nhoff and thoff as u16, so cap hlen
to U16_MAX before clamping.
Found by sashiko while reviewing the commit above.
Fixes: d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Eric Dumazet <edumazet@kernel.org>
Link: https://patch.msgid.link/20261007045616.445596-1-edumazet@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Fleischmann reported Intel IOMMU DMA Read faults on BCM57412
NetXtreme-E NICs when transmitting packets on VLAN/macvlan interfaces:
DMAR: [DMA Read NO_PASID] Request device [18:00.0] fault addr 0xfc499000
[fault reason 0x06] PTE Read access is not set
bnxt_en 0000:18:00.0 eno1np0: Abandoning msg {0xb4 0x41a} len: 0 due to firmware status: 0x2000001
...
NETDEV WATCHDOG: eno1np0 (bnxt_en): transmit queue 0 timed out
The fault address (0xfc499000) is on an exact 4KB page boundary,
pointing to a DMA read buffer overrun.
In bnxt_start_xmit(), packets smaller than BNXT_MIN_PKT_SIZE (52 bytes),
such as 42-byte untagged ARP frames, are padded:
if (length < BNXT_MIN_PKT_SIZE) {
pad = BNXT_MIN_PKT_SIZE - length;
if (skb_pad(skb, pad))
goto tx_kick_pending;
length = BNXT_MIN_PKT_SIZE;
}
mapping = dma_map_single(&pdev->dev, skb->data, len, DMA_TO_DEVICE);
...
dma_unmap_len_set(tx_buf, len, len);
However, 'len' was initialized earlier to skb_headlen(skb) (e.g. 42 bytes)
and is left unadjusted after padding. Consequently, dma_map_single() and
dma_unmap_len_set() map and track only 42 bytes.
Later, the hardware TX buffer descriptor is programmed with the padded length:
txbd->tx_bd_len_flags_type =
cpu_to_le32(((len + pad) << TX_BD_LEN_SHIFT) | flags |
TX_BD_FLAGS_PACKET_END);
The NIC DMA engine is thus instructed to read 52 bytes from a region where
only 42 bytes were DMA-mapped. If skb->data ends near the boundary of a 4KB
page (within 'pad' bytes of the next page), the hardware DMA read overruns
into the unmapped adjacent page, triggering an IOMMU fault.
This issue was exposed after commit 447cbe95eb ("vlan: fix skb_under_panic
and races when toggling HW VLAN offload") because reserving extra VLAN
headroom rounded LL_RESERVED_SPACE from 48 up to 64 bytes, shifting skb->data
offsets and potentially causing small frames to land right against page
boundaries.
Fix this by using skb_put_padto(skb, BNXT_MIN_PKT_SIZE) in
bnxt_start_xmit(), before skb_shinfo(skb)->nr_frags is sampled,
because padding might linearize the skb.
This ensures skb->len and skb_headlen(skb) reflect the padded size so
that dma_map_single() maps the full buffer and the descriptor length is
consistent. This also removes the temporary 'pad' variable and masking logic.
The padding is done after the SW USO branch, otherwise
bnxt_sw_udp_gso_xmit() would account the padding as UDP payload
and send it in extra segments.
Note that SW USO segments are still not padded: with IPv4, a segment
carrying less than 10 bytes of UDP payload (small gso_size, or a short
last segment) is sent as a frame shorter than BNXT_MIN_PKT_SIZE.
This is a separate issue, left for a followup patch.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Cc: stable@vger.kernel.org
Reported-by: Stefan Fleischmann <sfle@kth.se>
Closes: https://lore.kernel.org/netdev/20261004122616.56714cbd@nargothrond/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20261007051747.455273-1-edumazet@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: PCIe FLR/AER fixes
This patchset is split from the earlier 9-patch series to limit the
fixes to the PCIe FLR/AER issues only (patches 7 to 9). The other
fixes (patches 1 to 6) will be sent to net-next separately.
The 1st patch is unchanged since v1. It refactors a bnxt_clear_bars()
helper needed by patch 2 and 3. Patch 2 fixes an issue during driver
init. in the kdump kernel on a Dell system with a smart PCIe switch
upstream from the NIC. Patch 3 fixes an issue in the AER code path for
non-fatal errors found by a partner.
These patches have been regression tested on Broadcom 5750X and 5760X
NICs running 237.x.x.x production FW.
====================
Link: https://patch.msgid.link/20261005204246.3822563-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver zeroes the BARs only when fatal PCIe errors
are reported so that pci_restore_state() restores it. However
firmware handles both fatal and non-fatal errors the same way when
it sees the slot reset resulting from the PCI_ERS_RESULT_NEED_RESET
return code from the driver. This means that we must re-write the
BARs post recovery even during non-fatal errors. Otherwise we will
see that every MMIO access returns all-ones and the firmware appears
dead.
Zero-out the BARs during PCIe error recovery regardless of type of
PCIe error, and make the wait after the hot reset unconditional.
Disable memory decode and bus mastering before rewriting the BARs so
the device doesn't decode a half-updated address, bailing out if
config space is still inaccessible. Defer pci_enable_device() until
after the BAR rewrite and restore, so the device isn't re-enabled
while its BARs are still being rewritten, then re-enable the device
and re-assert bus mastering. Guard the same Command register cleanup
on the re-enable failure path against an inaccessible device.
Skip re-enabling the device in bnxt_io_slot_reset() if it is already
enabled, so enable_cnt does not go unbalanced. A concurrent
bnxt_fw_reset_task() can also be re-enabling the same device in its
ENABLE_DEV state, so guard that call the same way.
Fixes: f75d9a0aa9 ("bnxt_en: Re-write PCI BARs after PCI fatal error.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20261005204246.3822563-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix and strengthen the FLR sequence when initializing in the kdump
kernel. If the NIC is behind a PCIe switch in synthetic (smart)
mode, the switch may need to see that the BARs have been initialized
before it will pass mem read/write TLPs to the NIC.
On a Dell system with a PEX89144 PCIe switch, echo c > /proc/sysrq-trigger
will trigger fatal AER without this patch:
bnxt_en 0000:67:00.0: enabling device (0000 -> 0002)
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 5
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: fatal
[Hardware Error]: section_type: PCIe error
[Hardware Error]: port_type: 5, upstream switch port
...
Add a new bnxt_kdump_reset() to do the expanded FLR sequence in the
kdump kernel. We now disable bus master and memory, save the PCI
state, do the FLR, clear the BARs, and restore the PCI state. The
BARs have to be cleared to ensure that they get re-initialized and
visible to the PCIe switch.
Since it is the kdump kernel, we make every effort to continue in
the best possible way even if pci_save_state() or pcie_flr() returns
error. After FLR, we poll for an additional 5 seconds before
aborting in case the device is not properly returning CRS. This is
similar to the 5-second wait in bnxt_io_slot_reset().
Fixes: 8743db4a9a ("bnxt_en: Issue PCIe FLR in kdump kernel to cleanup pending DMAs.")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20261005204246.3822563-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_io_slot_reset(), we clear the 6 BAR registers. Add a helper
function to do that. The helper will be used again in the next patch.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20261005204246.3822563-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4ce62d5b2f ("net: usb: ax88179_178a: stop lying about
skb->truesize") replaced skb_clone() with a copy into a new skb for
every packet of a bulk-in transfer except the last one. The copy skips
the 2-byte IP alignment pseudo header but still copies pkt_len bytes,
and pkt_len includes that header. Each of these frames is therefore
delivered with two extra trailing bytes: the 0xeeee pseudo header of
the next slot when the frame ends on an 8-byte boundary, or slot
padding otherwise. The last packet is still trimmed to pkt_len - 2.
IPv4 and IPv6 trim the extra bytes, so most traffic is unaffected.
Anything that relies on the frame length is not. MACsec takes the ICV
from the last 16 bytes and drops every such frame as InPktsNotValid. In
our setup that was 0.2-1.2% of received MACsec frames, depending on how
many frames shared a transfer, including service discovery multicast.
Allocate and copy pkt_len - 2 bytes, like the last-packet path.
Fixes: 4ce62d5b2f ("net: usb: ax88179_178a: stop lying about skb->truesize")
Cc: stable@vger.kernel.org
Signed-off-by: Fredrik Nyberg <fredrik.nyberg@volvocars.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20261002-ax88179-rx-len-v1-1-f01a2a295079@volvocars.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 13ff543e0b.
The 'goto free' just made things worse, causing a spinlock
to be handled incorrectly. Revert this for now.
Reported-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@vger.kernel.org
Fixes: 13ff543e0b ("wifi: libertas: reject short monitor TX frames")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the wdev and frees the vif and the ifp.
- brcmf_detach() sets the bus down, so BRCMF_E_IF_DEL never arrives,
and calls brcmf_remove_interface(ifp, false) for the same ifp.
brcmf_p2p_ifp_removed() reads ifp->vif and then blocks on
rtnl_lock(). When brcmf_p2p_del_vif() releases RTNL, it calls
cfg80211_unregister_wdev() on the wdev that was already unregistered
and freed.
The second list_del_rcu() of wdev->list faults on LIST_POISON2:
brcmfmac: brcmf_p2p_del_vif delete P2P vif
brcmfmac: brcmf_p2p_deinit_discovery enter
brcmfmac: brcmf_p2p_del_vif P2P: GO_NEG_PHASE status cleared
brcmfmac: brcmf_detach Enter
brcmfmac: brcmf_bus_change_state 1 -> 0
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
[1.5 s later, brcmf_p2p_del_vif() timed out]
brcmfmac: brcmf_remove_interface Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_del_if Enter, bsscfgidx=1, ifidx=0
brcmfmac: brcmf_p2p_ifp_removed P2P: device interface removed
Unable to handle kernel paging request at virtual address dead000000000122
Internal error: Oops: 96000044 [#1] PREEMPT_RT SMP
pc : _cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
Call trace:
_cfg80211_unregister_wdev+0x6c/0x264 [cfg80211]
cfg80211_unregister_wdev+0x10/0x1c [cfg80211]
brcmf_p2p_ifp_removed+0x84/0xb0 [brcmfmac]
brcmf_remove_interface+0x1f4/0x254 [brcmfmac]
brcmf_detach+0x88/0x180 [brcmfmac]
brcmf_sdio_remove+0x90/0x7b0 [brcmfmac]
brcmf_sdiod_remove+0x20/0xa0 [brcmfmac]
brcmf_ops_sdio_remove+0xbc/0x12c [brcmfmac]
sdio_bus_remove+0x38/0x144
device_release_driver_internal+0x1e8/0x2c0
device_release_driver+0x14/0x20
brcmf_sdio_bus_remove+0x2c/0x40 [brcmfmac]
brcmf_fwvid_unregister_vendor+0xd8/0x170 [brcmfmac]
__exit_compat+0x18/0x418 [brcmfmac_cyw]
__arm64_sys_delete_module+0x1ac/0x244
The log was taken with debug=0x406 on an i.MX 8M Plus board with a
CYW55513 (Sona IF513) on SDIO. The driver is the Ezurio backport of
brcmfmac from v6.18.22 on a 5.4-rt kernel. The code involved is the same
in mainline.
To reproduce:
1. Start wpa_supplicant on wlan0 and let it associate. It creates the
P2P device (iw dev shows "type P2P-device").
2. Stop wpa_supplicant and remove the driver without waiting for
wpa_supplicant to exit:
kill $(pidof wpa_supplicant)
rmmod brcmfmac_cyw brcmfmac
The crash is reproducible on that board.
For the interface without a netdev (the P2P device), take RTNL and the
wiphy mutex in brcmf_detach() before reading iflist, and remove it with
locked=true. If brcmf_p2p_del_vif() runs first, brcmf_detach() finds the
slot empty. If brcmf_detach() runs first, nl80211 does not find the wdev
any more. The interfaces with a netdev are removed as before, because
brcmf_del_if() takes RTNL on its own for the primary interface.
Fixes: 9831bcb987 ("brcmfmac: Deleting of p2p device is leaking memory.")
Cc: stable@vger.kernel.org
Assisted-by: claude-opus-5-5
Signed-off-by: Michele Dionisio <michele.dionisio@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260924123027.4122909-2-michele.dionisio@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ath12k, revert the panic handler that landed in v6.11 since it can
perform a voluntary context switch within an RCU read-side critical
section.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCasUBogAKCRAsFbugiYzL
e0isAQChqOuzPK1KsBAIGKuSXbSakevCJZt9TES5wFCIEvCqsAD/adC6E3WSeCHV
kDVf45C2cohaZzu54YLduTQ56Ltyrgc=
=pwVw
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20261006' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v7.3-rc7
In ath12k, revert the panic handler that landed in v6.11 since it can
perform a voluntary context switch within an RCU read-side critical
section.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_fill_rate_info() copies the driver's rate_info bandwidth into
the rx_status as is, but ieee80211_get_rate_duration() only handles
20/40/80/160/320 MHz. When a driver reports another width, e.g. an
HE/EHT RU allocation, it hits WARN_ON_ONCE() and returns 0 without
setting *overhead. ieee80211_rate_expected_tx_airtime() then goes on
using the uninitialized overhead, as Dan's static checker report
points out.
Seen on a Microsoft Surface Pro 11 (WCN7850, ath12k) while
NetworkManager dumps station info:
WARNING: net/mac80211/airtime.c:532 at ieee80211_get_rate_duration.isra.0+0xc0/0x180 [mac80211]
ieee80211_get_rate_duration.isra.0+0xc0/0x180 [mac80211]
sta_estimate_expected_throughput.isra.0+0x38/0x64 [mac80211]
sta_set_sinfo+0x7fc/0x8e4 [mac80211]
ieee80211_dump_station+0x4c/0x84 [mac80211]
nl80211_dump_station+0x594/0x7e8 [cfg80211]
Only accept widths that ieee80211_get_rate_duration() handles in
ieee80211_fill_rate_info(). Other widths then give no estimate instead
of a warning. Also return 0 from ieee80211_rate_expected_tx_airtime()
when no duration could be computed, as ieee80211_calc_rx_airtime()
already does.
Tested on the Surface Pro 11 with next-20260929: Wi-Fi works and
"expected throughput" is still reported (about 1049 Mbit/s for a
1297 Mbit/s HE 160 MHz tx rate). The warning itself is rare (twice in
several days of use), so this does not prove it is gone, only that the
change does not break the normal path.
Fixes: 094dc1619c ("wifi: mac80211: factor out part of ieee80211_calc_expected_tx_airtime")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/aneGlCMVnqRhlf6p@stanley.mountain/
Assisted-by: LLM
Signed-off-by: François Roux <franzelfranzel@gmail.com>
Link: https://patch.msgid.link/20261006083751.4015-1-franzelfranzel@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pfcp_encap_recv() only makes sure that the UDP header and the 4 byte
PFCP header are in the linear area. When the S flag is set,
pfcp_session_recv() then reads the 8 byte SEID that follows, which is
not covered by the pskb_may_pull() check.
A short PFCP packet with the S flag set, or one whose session header
lies in a fragment, therefore makes pfcp_session_recv() read beyond the
end of the packet data, and whatever it finds there is stored in the
tunnel metadata that flower later classifies on.
Pull up to the end of the SEID before reading it, and drop packets
that are too short to contain it. Reload the header pointer afterwards
since pskb_may_pull() may reallocate the skb head.
Use offsetofend() rather than sizeof(struct pfcphdr_session): the
structure is not packed, so its size is 16 bytes because of the
alignment of the __be64 member, while the header on the wire is only 12
bytes, and valid session messages would be dropped.
Fixes: 6dd514f481 ("pfcp: always set pfcp metadata")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Link: https://patch.msgid.link/20260930124818.114224-3-yanhaishuang@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the revised suspend/resume sequence was introduced this led to an edge
case where the TX is left disabled in the following sequence.
1. phy link is down, so UMAC is held in reset and then network interface
is WoL enabled
2. Enter suspend, bcmgenet_wol_power_down_cfg() enables UMAC_RX since MAC
is in SW_RESET
4. Enter resume, UMAC_RX is left enabled. Since we only enable UMAC_TX
and UMAC_RX in SW_RESET. The UMAC_TX is never enabled again on link up.
The issue was hit in production and I verified the sequence keeps
the TX disabled in my standalone test. I tested on an internal
development board with bcm77122, but should be reproducible
on any genet HW that supports power management.
Fixes: 254f3239dd ("net: bcmgenet: revise suspend/resume")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260930230634.3132729-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment above strp_done() claims that if strp is stopped,
strp_recv will no longer be called. That's only true if the caller has
a mechanism (eg locking) to guarantee that strp_recv() calls that
started before strp_stop() have completed by the time we call
strp_done().
This adds a dummy lock_sock/release_sock pair to guarantee that any
in-flight strp_recv() (which runs under either bh_lock_sock or
lock_sock, depending if it's called from ->sk_data_ready or strp_work)
has completed.
Only espintcp can be affected by this race condition, but this patch
makes sure no future user of strp can have the bug.
This could crash on strp->sk ("general mode" of strp), but this mode
has been here for 9 years and has never been used. It'll be gone soon,
no point worrying about it.
Switch the stopped/paused/etc bits to u8's to avoid races between
strp_stop() and strp_pause/unpause().
A reproducer has been published and turns the possible UAF into an
exploit [1].
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://lore.kernel.org/all/aZLn2Faeg1FB7XOf@v4bel/
Link: https://lore.kernel.org/all/aZgpkyTDU3aXe_V0@v4bel/
Link: https://github.com/m0x41nos/RustyTux [1]
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Cc: stable@vger.kernel.org
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Hyunwoo Kim <imv4bel@gmail.com>
Link: https://patch.msgid.link/425d9d926709b542ed5331110c19fee4aee1f28d.1791206940.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When an SCTP stream output extension structure (streamoute) has not yet
been allocated, sctp_getsockopt_pr_streamstatus() sets the local stack
variables params.sprstat_abandoned_unsent = 0 and
params.sprstat_abandoned_sent = 0, but then immediately jumps to 'out:',
bypassing copy_to_user(). As a result, when an uninitialized user buffer
is passed to getsockopt(SCTP_PR_STREAM_STATUS), the kernel returns
success (0) without copying the zeroed stats back to user space, leaving
uninitialized data in the user buffer.
Refactor the !streamoute check into an if-else chain so that when
streamoute is NULL, params is zeroed and falls through to copy_to_user(),
copying the zeroed stats to user space and setting retval = 0 once before
returning.
Tested in QEMU against Linux 7.3.0-rc3 using an uninitialized
sctp_prstatus user struct passed to getsockopt(SCTP_PR_STREAM_STATUS) on a
freshly created stream: on the unfixed kernel the user struct contains
uninitialized stack garbage; whereas with this fix applied, getsockopt()
copies zeroed stats into user space and returns 0.
Cc: stable@vger.kernel.org
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hui Peng <benquike@gmail.com>
Fixes: f952be79ce ("sctp: introduce struct sctp_stream_out_ext")
Link: https://patch.msgid.link/20260930044611.204739-1-benquike@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCar54lBMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3SmVIA/16Wjz51szH3t6EB77XZ9E0pR4VNxEuu
C7ivuBl916gUAQDGEhXer8DCkn7QA1b6L+AtTgoRGFp7xdeqlLET9WOeDw==
=giCL
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-7.3-20261001' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-10-01
The first patch is by zjamg and restores the skb header initialization
lost during the v7.0 release cycle.
Oliver Hartkopp contributes a patch for the CAN net layer to fix the
unique skb identifier regression under RPS, introduced in the v7.0
release cycle, which causes lost packets.
The last patch is by Ji-Ze Hong and fixes a struct size mismatch in
the f81604 CAN driver, which results in a TX starvation.
* tag 'linux-can-fixes-for-7.3-20261001' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
usb: f81604: fix struct f81604_int_data size mismatch
can: fix unique skb identifier regression under RPS
can: dev: init_can_skb(): restore skb header initialization
====================
Link: https://patch.msgid.link/20261001151905.1556270-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit ad0ae7aefa ("net/mlx5: E-Switch, preserve max tx
speed on vport state modification").
mlx5_modify_vport_admin_state() and mlx5_esw_adj_vport_modify() query
the vport's current max_tx_speed before modifying its state, and
write that value back, to avoid resetting it to 0 as a side effect
of an unrelated admin-state change.
That's unnecessary: max_tx_speed is optional in MODIFY_VPORT_STATE -
FW skips writing it whenever it's 0, treating that as "not provided"
rather than "reset to zero". Leaving it unset already preserves FW's
current value, with no query needed.
Fixes: ad0ae7aefa ("net/mlx5: E-Switch, preserve max tx speed on vport state modification")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20261004083531.216988-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
