Enable Runtime PM for the mipi_i3c_hci_pci driver. Introduce helpers to
allow and forbid Runtime PM during probe and remove, using pm_runtime APIs.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-22-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Implement optional Runtime PM support for the MIPI I3C HCI driver.
Introduce runtime suspend and resume callbacks to manage bus state and
restore hardware configuration after resume. Optionally enable autosuspend
with a default delay of 1 second, and add helper functions to control
Runtime PM during probe and remove.
Read quirks from i3c_hci_driver_ids[] and set new quirk
HCI_QUIRK_RPM_ALLOWED for intel-lpss-i3c devices to enable runtime PM for
them.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-21-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Master drivers currently manage Runtime PM individually, but all require
runtime resume for bus operations. This can be centralized in common code.
Add optional Runtime PM support to ensure the parent device is runtime
resumed before bus operations and auto-suspended afterward.
Notably, do not call ->bus_cleanup() if runtime resume fails. Master
drivers that opt-in to core runtime PM support must take that into account.
Also provide an option to allow IBIs and hot-joins while runtime suspended.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-20-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for future reuse. Move master dynamic address setting logic from
i3c_hci_bus_init() into a dedicated helper function,
i3c_hci_set_master_dyn_addr().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-19-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare i3c_hci_reset_and_init() to support runtime resume. Update it to
handle the case where the I/O mode has already been selected.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-18-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for future reuse. Move core initialization logic from
i3c_hci_init() into a dedicated helper function,
i3c_hci_reset_and_init().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-17-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for future reuse. Move the IO mode setting logic from
i3c_hci_init() into a dedicated helper function, i3c_hci_set_io_mode().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-16-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for future reuse of the reset sequence in other contexts, such as
power management. Move the software reset logic from i3c_hci_init() into a
dedicated helper function, i3c_hci_software_reset().
Software reset should never fail. Print an error message if it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Introduce helper functions to suspend and resume PIO operations. These
are required to prepare for upcoming Runtime PM support, ensuring that
PIO state is properly managed during power transitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move the PIO register setup logic out of hci_pio_init() into a new
helper, __hci_pio_init(). This refactoring prepares for Runtime PM
support by allowing PIO registers to be reinitialized independently
after resume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Introduce helper functions to suspend and resume DMA operations. These
are required to prepare for upcoming Runtime PM support, ensuring that
DMA state is properly managed during power transitions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Split the ring setup logic out of hci_dma_init() into a new helper
hci_dma_init_rings(). This refactoring prepares for Runtime PM support
by allowing DMA rings to be reinitialized independently after resume.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a dedicated function to restore the Device Address Table (DAT) in
preparation for Runtime PM support. This will allow reprogramming the DAT
after the controller resumes from a low-power state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for Runtime PM support, which requires restoring the Device Address
Table (DAT) registers after resume. Maintain a copy of DAT in memory so it
can be reprogrammed when the controller is powered back up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver already uses devres for resource management, but the standard
resource-managed DMA allocation helpers cannot be used because they assume
the DMA device matches the managed device.
To address this, factor out the deallocation logic from hci_dma_cleanup()
into a new helper, hci_dma_free(), and register it as a devres action.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver already uses managed resources, so convert the PIO data
structure allocation to devm_zalloc(). Remove the manual kfree().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The driver already uses managed resources, so convert the Device Address
Table (DAT) bitmap allocation to use devm_bitmap_zalloc(). Remove the
manual cleanup routine.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
IBI disable failures are not indicative of a software bug, so using
WARN_ON() is not appropriate. Replace these warnings with dev_err().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
To prevent inconsistent state when an error occurs, ensure the hot-join
flag is updated only when enabling or disabling hot-join succeeds.
Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wait for the bus to fully disable before proceeding, ensuring that no
operations are still in progress. Synchronize the IRQ handler only after
interrupt signals have been disabled. This approach also handles cases
where bus disable might fail, preventing race conditions and ensuring a
consistent shutdown sequence.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI specification does not define reset values for
RING_OPERATION1 fields, and some controllers (e.g., Intel) do not clear
them during a software reset. Ensure the ring pointers are explicitly
set to zero during bus initialization to avoid inconsistent state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move device name initialization to occur after i3c_bus_init()
so that i3cbus->id is guaranteed to be assigned before it is used.
Fixes: 9d4f219807 ("i3c: fix refcount inconsistency in i3c_master_register")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260112-upstream_i3c_fix-v1-1-cbbf2cb71809@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Renesas I3C controller does not retain its register state across system
suspend, requiring the driver to explicitly save and restore hardware
configuration.
Add suspend and resume NOIRQ callbacks to handle system sleep transitions.
During suspend, save the Device Address Table (DAT) entries, assert reset
lines, and disable all related clocks to allow the controller to enter a
low-power state.
On resume, re-enable clocks and reset lines in the proper order. Restore
the REFCKCTL register, master dynamic address, and all DAT entries, then
reinitialize the controller.
Store the REFCLK divider value, and the master dynamic address to restore
timing and addressing configuration after resume.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/c469ef89e0156d37746a85bfc314232847d1185a.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Move the hardware initialization sequence in renesas_i3c_bus_init()
into a dedicated renesas_i3c_hw_init() helper.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/795327270a6ceb23e15513a2619a19ae4876cfba.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update the struct renesas_i3c to store the clock rate, presetn and
tresetn handlers. Replace local usage of the clock rate and reset
controls with these structure fields.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/9e1da95dd9137590c752ecd9429925afcbeb918b.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Replace individual devm_clk_get_enabled() calls with the clk_bulk API
and store the clock handles in the driver's private data structure.
All clocks required by the controller are now acquired and enabled using
devm_clk_bulk_get_all_enabled(), removing the need for per-SoC clock
handling and the renesas_i3c_config data.
The TCLK is accessed via a fixed index in the bulk clock array.
Simplify the code and prepare the driver for upcoming suspend/resume
support.
No functional change intended.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/1286f8600b542da55facf9920fed7c06b2b0e4d5.1767781092.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Define Multi-Bus Instances at offset 0x400 for Intel controllers.
Intel SoCs include two I3C PCI devices in the Low Power Subsystem (LPSS),
each capable of hosting two I3C buses. Panther Lake and Wildcat Lake
support three buses in total (IDs 0–2), while Nova Lake supports four
(IDs 0–3).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
Create an MFD cell for each instance and use platform_data to pass the
starting address of the instance's register set.
The MIPI I3C HCI specification defines an Extended Capability that holds
the offset of each instance register set. Parsing this information is
relatively complex, so include the offsets in driver data for now.
Driver data for additional instances beyond instance 0 will be added in a
subsequent patch.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for Multi-Bus instance support. Convert to MFD driver but still
support only 1 instance.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use the parent's MMIO mapping for multi-bus instances to avoid overlapping
regions. These instances share the same MMIO address space, but the ranges
are not guaranteed to be contiguous. By passing base_regs from the parent
mapping, child devices can access their registers without creating
conflicting mappings.
Prepare for multi-bus instance support by passing base_regs to child
devices.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Simplify the code and ensure names and IDs align with device documentation.
Use explicit device names and IDs for Intel LPSS I3C controllers instead of
dynamically allocated values.
Add "intel-lpss-i3c" to the platform_device_id table in the mipi-i3c-hci
driver and use the same name for Intel I3C controllers in the
mipi_i3c_hci_pci driver. Assign hard-coded IDs to reflect the hardware
layout.
Intel SoCs include two I3C PCI devices in the Low Power Subsystem (LPSS),
each supporting up to two I3C buses. The second PCI device is assigned ID 2
(not 1) to match this topology. Additional IDs will be introduced when
Multi-Bus Instance support is implemented.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Enable MSI support by using pci_alloc_irq_vectors() to request all
supported IRQ types. Do not call pci_free_irq_vectors() because for
resource-managed devices (those initialized with pcim_enable_device()),
IRQ vector allocation is automatically managed. See
pci_setup_msi_context() and pcim_setup_msi_release() for details.
Note: The current documentation for pci_alloc_irq_vectors() does not
mention this behavior.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All entries in the id_table have driver_data. Do not repeatedly check for
NULL driver_data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The copious initialization messages are at most useful only for debugging.
Change them from dev_info() or dev_notice() to dev_dbg().
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Extended Capability ID value 0 is special. It signifies the end of the
list. Stop reading Extended Capabilities if capability ID is 0.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When I3C is disabled, unused functions are removed by the linker because
the driver relies on regmap and no I3C devices are registered, so normal
I3C paths are never called.
However, some drivers may still call low-level I3C transfer helpers.
Provide stub implementations to avoid adding conditional ifdefs everywhere.
Add stubs for i3c_device_do_xfers() and
i3c_device_get_supported_xfer_mode() only. Other stubs will be introduced
when they are actually needed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512230418.nu3V6Yua-lkp@intel.com/
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251230145718.4088694-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251224124551.208778-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Drop i3c_priv_xfer and i3c_device_do_priv_xfers() after all driver switch
to use new API.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251215172405.2982801-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Update dw_i3c_master_restore_addrs() to preserve existing bits in each
Device Address Table (DAT) entry when restoring addresses. This prevents
overwriting configuration bits during PM runtime resumes.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/46112c0da44110f46709cb0e7a4595e312b95c10.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add DEV_ADDR_TABLE_DYNAMIC_MASK / DEV_ADDR_TABLE_DYNAMIC_ADDR(x) for
dynamic device addresses and DEV_ADDR_TABLE_STATIC_MASK /
DEV_ADDR_TABLE_STATIC_ADDR(x) for static device addresses in the I3C
address table. Replace manual shift-and-mask with FIELD_PREP() for both
dynamic and static addresses for clarity and maintainability.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d72896e510db1870d26a794f131f600c7e42cf00.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C controller supports automatically retrying transactions
when a device NACKs. This is useful for slave devices that may be
temporarily busy and not ready to respond immediately.
Add new ops to configure all active DAT entry with dev_nack_retry during
runtime. Returns error when value exceeds hw specified limit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/f09ee67e61d31f0a12a0bf48f01e9057ca9e2fb7.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaT4RWBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIVfSgEA23oY0kPjLLkNj4KAjLoWVPmZ/5efKw49
m6YUwfvzTS8BAIq4eFHVecwAM8FAe9NwuOKgO5d9u6epAy6wzBeP2jly
=cpHq
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmk8YxITHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi702B/9Mfj0HQSAaWCyMz6GJAv8+1ijVTSbG
nTFeMmipYZhPn188OvWqHsf1cw9rWY0fzenIEW05Tk3YmMvYdeRmCcOkZdeG06xw
um8XxX4L8315E0b98CCpQpVa02ux7XoNtBPjeHccl8PEErJQgQJrQ3Cc/C8kk5U5
a0KlfeVRXYWkOPJva3+wosOu0t9QgJ9ABt5stqcvYDfdkKfvatQMBN3N1nNRKkFH
yhNPv+nRtypSk8jiHhKeeCVmosC0L7MnKuO593vDr761cY5mKrgKFqc2LLlPF6r0
/p13s5SG6X38RUegWCjcK4XRJAzVcR/tyod8LkVVp8d5DC/ptcyy8H+I
=h1gC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jbkd
-----END PGP SIGNATURE-----
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
