[ Upstream commit 5e742de97c ]
DMA Engine has support for the callback_result which provides
the status of the request and the residue. This helps in
determining the correct status of the request and in
efficient resource management of the request.
The 'callback_result' method is preferred over the deprecated
'callback' method.
Signed-off-by: Devendra K Verma <devverma@amd.com>
Link: https://lore.kernel.org/r/20250821121505.318179-1-devverma@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d9a3e99294 ]
This patch modifies the type of setup_xref from void to int and handles
errors since the function can fail.
`setup_xref` now returns the (eventual) error from
`dmae_set_dmars`|`dmae_set_chcr`, while `shdma_tx_submit` handles the
result, removing the chunks from the queue and marking PM as idle in
case of an error.
Signed-off-by: Thomas Andreatta <thomas.andreatta2000@gmail.com>
Link: https://lore.kernel.org/r/20250827152442.90962-1-thomas.andreatta2000@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee4b32220a ]
When a buffer object (BO) is allocated with the XE_BO_FLAG_GGTT_INVALIDATE
flag, the driver initiates TLB invalidation requests via the CTB mechanism
while releasing the BO. However a premature release of the CTB BO can lead
to system crashes, as observed in:
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:h2g_write+0x2f3/0x7c0 [xe]
Call Trace:
guc_ct_send_locked+0x8b/0x670 [xe]
xe_guc_ct_send_locked+0x19/0x60 [xe]
send_tlb_invalidation+0xb4/0x460 [xe]
xe_gt_tlb_invalidation_ggtt+0x15e/0x2e0 [xe]
ggtt_invalidate_gt_tlb.part.0+0x16/0x90 [xe]
ggtt_node_remove+0x110/0x140 [xe]
xe_ggtt_node_remove+0x40/0xa0 [xe]
xe_ggtt_remove_bo+0x87/0x250 [xe]
Introduce a devm-managed release action during xe_guc_ct_init() and
xe_guc_ct_init_post_hwconfig() to ensure proper CTB disablement before
resource deallocation, preventing the use-after-free scenario.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Summers Stuart <stuart.summers@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250901072541.31461-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a8c02a6bf ]
Networking drivers implementing PTP clocks and kernel socket code
handling hardware timestamps use the 64-bit signed ktime_t type counting
nanoseconds. When a PTP clock reaches the maximum value in year 2262,
the timestamps returned to applications will overflow into year 1667.
The same thing happens when injecting a large offset with
clock_adjtime(ADJ_SETOFFSET).
The commit 7a8e61f847 ("timekeeping: Force upper bound for setting
CLOCK_REALTIME") limited the maximum accepted value setting the system
clock to 30 years before the maximum representable value (i.e. year
2232) to avoid the overflow, assuming the system will not run for more
than 30 years.
Enforce the same limit for PTP clocks. Don't allow negative values and
values closer than 30 years to the maximum value. Drivers may implement
an even lower limit if the hardware registers cannot represent the whole
interval between years 1970 and 2262 in the required resolution.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <jstultz@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250828103300.1387025-1-mlichvar@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e61c35157d ]
Depending on which display that is connected to the controller, an
"1" means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, make it possible to invert
the pixels.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-4-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a33efe4fc ]
trans_pcie::fh_mask and hw_mask indicates what are the interrupts are
currently enabled (unmasked).
When we disable all interrupts, those should be set to 0, so if, for
some reason, we get an interrupt even though it was disabled, we will
know to ignore.
Reviewed-by: Yedidya Ben Shimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250828111032.e293d6a8385b.I919375e5ad7bd7e4fee4a95ce6ce6978653d6b16@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65673c6e33 ]
The imx-mipi-csis driver sets the rate of the wrap clock to the value
specified in the device tree's "clock-frequency" property, and defaults
to 166 MHz otherwise. This is a historical mistake, as clock rate
selection should have been left to the assigned-clock-rates property.
Honouring the clock-frequency property can't be removed without breaking
backwards compatibility, and the corresponding code isn't very
intrusive. The 166 MHz default, on the other hand, prevents
configuration of the clock rate through assigned-clock-rates, as the
driver immediately overwrites the rate. This behaviour is confusing and
has cost debugging time.
There is little value in a 166 MHz default. All mainline device tree
sources that enable the CSIS specify a clock-frequency explicitly, and
the default wrap clock configuration on supported platforms is at least
as high as 166 MHz. Drop the default, and only set the clock rate
manually when the clock-frequency property is specified.
Link: https://lore.kernel.org/r/20250822002734.23516-10-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d55af0f07 ]
On FSD platform, gating the reference clock (ref_clk) and putting the
UFS device in reset by asserting the reset signal during UFS suspend,
improves the power savings and ensures the PHY is fully turned off.
These operations are added as FSD specific suspend hook to avoid
unintended side effects on other SoCs supported by this driver.
Co-developed-by: Nimesh Sati <nimesh.sati@samsung.com>
Signed-off-by: Nimesh Sati <nimesh.sati@samsung.com>
Signed-off-by: Bharat Uppal <bharat.uppal@samsung.com>
Link: https://lore.kernel.org/r/20250821053923.69411-1-bharat.uppal@samsung.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aead8e4cc0 ]
Make the "mclk" clock optional in the ad7124 driver. The MCLK is an
internal counter on the ADC, so it is not something that should be
coming from the devicetree. However, existing users may be using this
to essentially select the power mode of the ADC from the devicetree.
In order to not break those users, we have to keep the existing "mclk"
handling, but now it is optional.
Now, when the "mclk" clock is omitted from the devicetree, the driver
will default to the full power mode. Support for an external clock
and dynamic power mode switching can be added later if needed.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-2-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bee3554d1a ]
Use int instead of u32 for 'ret' variable to store negative error codes
returned by PM8001_CHIP_DISP->set_nvmd_req().
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Link: https://lore.kernel.org/r/20250826093242.230344-1-rongqianfeng@vivo.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c634b6b3c ]
As noted in the kernel documentation [1], open-coded multiplication in
allocator arguments is discouraged because it can lead to integer overflow.
Use kcalloc() to gain built-in overflow protection, making memory
allocation safer when calculating allocation size compared to explicit
multiplication. Similarly, use size_add() instead of explicit addition
for 'uobj_chunk_num + sobj_chunk_num'.
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments#1
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b62a59c18b ]
Use RCU to avoid a pair of atomic operations and a potential
UAF on dst_dev()->flags.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250828195823.3958522-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34c21e9119 ]
Introduce support for standard MII ioctl operations in the LAN865x
Ethernet driver by implementing the .ndo_eth_ioctl callback. This allows
PHY-related ioctl commands to be handled via phy_do_ioctl_running() and
enables support for ethtool and other user-space tools that rely on ioctl
interface to perform PHY register access using commands like SIOCGMIIREG
and SIOCSMIIREG.
This feature enables improved diagnostics and PHY configuration
capabilities from userspace.
Signed-off-by: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250828114549.46116-1-parthiban.veerasooran@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b9706ce84 ]
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: stp@e100bb0 (lantiq,gpio-stp-xway): $nodename:0: 'stp@e100bb0' does not match '^gpio@[0-9a-f]+$'
from schema $id: http://devicetree.org/schemas/gpio/gpio-stp-xway.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0d04fe6a6 ]
Bindig requires a node name matching ‘^gpio@[0-9a-f]+$’. This patch
changes the clock name from “stp” to “gpio”.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d66949a187 ]
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: pci@e105400 (lantiq,pci-xway): 'device_type' is a required property
from schema $id: http://devicetree.org/schemas/pci/pci-bus-common.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb96fd880e ]
This fixes the following warning:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: / (lantiq,xway): 'model' is a required property
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8dee66c37 ]
This fixes the following warnings:
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#address-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpus: '#size-cells' is a required property
from schema $id: http://devicetree.org/schemas/cpus.yaml#
arch/mips/boot/dts/lantiq/danube_easy50712.dtb: cpu@0 (mips,mips24Kc): 'reg' is a required property
from schema $id: http://devicetree.org/schemas/mips/cpus.yaml#
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 585b2f685c ]
Update the legacy (non-DC) display code to respect the maximum
pixel clock for HDMI and DVI-D. Reject modes that would require
a higher pixel clock than can be supported.
Also update the maximum supported HDMI clock value depending on
the ASIC type.
For reference, see the DC code:
check max_hdmi_pixel_clock in dce*_resource.c
v2:
Fix maximum clocks for DVI-D and DVI/HDMI adapters.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306cbcc6f6 ]
[Why & How]
Previously, when calculating dto phase, we would incorrectly fail when phase
<=0 without additionally checking for the integer value. This meant that
calculations would incorrectly fail when the desired pixel clock was an exact
multiple of the reference clock.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 002a612023 ]
[Why]
-Pipe splitting allows for clocks to be reduced, but when using TMDS 420,
reduced clocks lead to missed clocks cycles on clock resyncing
[How]
-Impose a minimum clock when using TMDS 420
Reviewed-by: Chris Park <chris.park@amd.com>
Signed-off-by: Relja Vojvodic <rvojvodi@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8d6e90abe ]
Notify pmfw when bad page threshold is exceeded, no matter the module
parameter 'bad_page_threshold' is set or not.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad299a9b9 ]
We can have modules in path which can change the number of channels and in
this case the BE params needs to be adjusted to configure the DAI according
to the copier configuration.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Message-ID: <20250829105305.31818-2-peter.ujfalusi@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0750649b52 ]
Compare the whole v4l2_bt_timings struct, not just the width/height when
setting new timings. Timings with the same resolution and different
pixelclock can now be properly set.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c158b5a570 ]
Commit 0d6ccfe6b3 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb53e8f09f ]
Use the newly added of_reserved_mem_region_to_resource() function to
handle "memory-region" properties.
The original code did not set 'zap_available' to false if
of_address_to_resource() failed which seems like an oversight.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/662275/
Link: https://lore.kernel.org/r/20250703183442.2073717-1-robh@kernel.org
[DB: dropped part related to VRAM, no longer applicable]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d47b4f084 ]
A partitioned system configured with only one package and one compute
die, warning will be generated for duplicate sysfs entry. This typically
occurs during the platform bring-up phase.
Partitioned systems expose dies, equivalent to TPMI compute domains,
through the CPUID. Each partitioned system must contains at least one
compute die per partition, resulting in a minimum of two dies per
package. Hence the function topology_max_dies_per_package() returns at
least two, and the condition "topology_max_dies_per_package() > 1"
prevents the creation of a root domain.
In this case topology_max_dies_per_package() will return 1 and root
domain will be created for partition 0 and a duplicate sysfs warning
for partition 1 as both partitions have same package ID.
To address this also check for non zero partition in addition to
topology_max_dies_per_package() > 1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20250819211034.3776284-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14a4aca568 ]
When beacon loss happens or the RSSI drops, trigger MLO scan only
if not in EMLSR. The link switch was meant to be done when we are
not in EMLSR and we can try to switch to a better link.
If in EMLSR, we exit first and then trigger MLO scan.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250826184046.f6ae8e3882cf.I60901c16487371b8e62019bd0bf25c45ab23752f@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b1161b1863 ]
Upon experiencing a PCI error, fbnic reset the device to recover from
the failure. Reset the hardware stats as part of the device reset to
ensure accurate stats reporting.
Note that the reset is not really resetting the aggregate value to 0,
which may result in a spike for a system collecting deltas in stats.
Rather, the reset re-latches the current value as previous, in case HW
got reset.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97bcc5b6f4 ]
This patch fixes an issue where two different flows on the same RXq
produce the same hash resulting in continuous flow overwrites.
Flow #1: A packet for Flow #1 comes in, kernel calls the steering
function. The driver gives back a filter id. The kernel saves
this filter id in the selected slot. Later, the driver's
service task checks if any filters have expired and then
installs the rule for Flow #1.
Flow #2: A packet for Flow #2 comes in. It goes through the same steps.
But this time, the chosen slot is being used by Flow #1. The
driver gives a new filter id and the kernel saves it in the
same slot. When the driver's service task runs, it runs through
all the flows, checks if Flow #1 should be expired, the kernel
returns True as the slot has a different filter id, and then
the driver installs the rule for Flow #2.
Flow #1: Another packet for Flow #1 comes in. The same thing repeats.
The slot is overwritten with a new filter id for Flow #1.
This causes a repeated cycle of flow programming for missed packets,
wasting CPU cycles while not improving performance. This problem happens
at higher rates when the RPS table is small, but tests show it still
happens even with 12,000 connections and an RPS size of 16K per queue
(global table size = 144x16K = 64K).
This patch prevents overwriting an rps_dev_flow entry if it is active.
The intention is that it is better to do aRFS for the first flow instead
of hurting all flows on the same hash. Without this, two (or more) flows
on one RX queue with the same hash can keep overwriting each other. This
causes the driver to reprogram the flow repeatedly.
Changes:
1. Add a new 'hash' field to struct rps_dev_flow.
2. Add rps_flow_is_active(): a helper function to check if a flow is
active or not, extracted from rps_may_expire_flow(). It is further
simplified as per reviewer feedback.
3. In set_rps_cpu():
- Avoid overwriting by programming a new filter if:
- The slot is not in use, or
- The slot is in use but the flow is not active, or
- The slot has an active flow with the same hash, but target CPU
differs.
- Save the hash in the rps_dev_flow entry.
4. rps_may_expire_flow(): Use earlier extracted rps_flow_is_active().
Testing & results:
- Driver: ice (E810 NIC), Kernel: net-next
- #CPUs = #RXq = 144 (1:1)
- Number of flows: 12K
- Eight RPS settings from 256 to 32768. Though RPS=256 is not ideal,
it is still sufficient to cover 12K flows (256*144 rx-queues = 64K
global table slots)
- Global Table Size = 144 * RPS (effectively equal to 256 * RPS)
- Each RPS test duration = 8 mins (org code) + 8 mins (new code).
- Metrics captured on client
Legend for following tables:
Steer-C: #times ndo_rx_flow_steer() was Called by set_rps_cpu()
Steer-L: #times ice_arfs_flow_steer() Looped over aRFS entries
Add: #times driver actually programmed aRFS (ice_arfs_build_entry())
Del: #times driver deleted the flow (ice_arfs_del_flow_rules())
Units: K = 1,000 times, M = 1 million times
|-------|---------|------| Org Code |---------|---------|
| RPS | Latency | CPU | Add | Del | Steer-C | Steer-L |
|-------|---------|------|--------|--------|---------|---------|
| 256 | 227.0 | 93.2 | 1.6M | 1.6M | 121.7M | 267.6M |
| 512 | 225.9 | 94.1 | 11.5M | 11.2M | 65.7M | 199.6M |
| 1024 | 223.5 | 95.6 | 16.5M | 16.5M | 27.1M | 187.3M |
| 2048 | 222.2 | 96.3 | 10.5M | 10.5M | 12.5M | 115.2M |
| 4096 | 223.9 | 94.1 | 5.5M | 5.5M | 7.2M | 65.9M |
| 8192 | 224.7 | 92.5 | 2.7M | 2.7M | 3.0M | 29.9M |
| 16384 | 223.5 | 92.5 | 1.3M | 1.3M | 1.4M | 13.9M |
| 32768 | 219.6 | 93.2 | 838.1K | 838.1K | 965.1K | 8.9M |
|-------|---------|------| New Code |---------|---------|
| 256 | 201.5 | 99.1 | 13.4K | 5.0K | 13.7K | 75.2K |
| 512 | 202.5 | 98.2 | 11.2K | 5.9K | 11.2K | 55.5K |
| 1024 | 207.3 | 93.9 | 11.5K | 9.7K | 11.5K | 59.6K |
| 2048 | 207.5 | 96.7 | 11.8K | 11.1K | 15.5K | 79.3K |
| 4096 | 206.9 | 96.6 | 11.8K | 11.7K | 11.8K | 63.2K |
| 8192 | 205.8 | 96.7 | 11.9K | 11.8K | 11.9K | 63.9K |
| 16384 | 200.9 | 98.2 | 11.9K | 11.9K | 11.9K | 64.2K |
| 32768 | 202.5 | 98.0 | 11.9K | 11.9K | 11.9K | 64.2K |
|-------|---------|------|--------|--------|---------|---------|
Some observations:
1. Overall Latency improved: (1790.19-1634.94)/1790.19*100 = 8.67%
2. Overall CPU increased: (777.32-751.49)/751.45*100 = 3.44%
3. Flow Management (add/delete) remained almost constant at ~11K
compared to values in millions.
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Link: https://patch.msgid.link/20250825031005.3674864-2-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76186a253a ]
Add a new _fini() routine on the GT TLB invalidation
side to handle this worker cleanup on driver teardown.
v2: Move the TLB teardown to the gt fini() routine called during
gt_init rather than in gt_alloc. This way the GT structure stays
alive for while we reset the TLB state.
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250826182911.392550-3-stuart.summers@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec813f384b ]
We need to cancel any outstanding work at both suspend
and driver teardown. Move the cancel to hw_fini which
gets called in both cases.
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b34e7ed4b ]
[WHY&HOW]
The sink max slice width limitation should be considered for DSC, but
was removed in "refactor DSC cap calculations".
This patch adds it back and takes the valid minimum between the sink and
source.
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3820e9d35 ]
When KFD asks CP to preempt queues, other than preempt CP queues, CP
also requests SDMA to preempt SDMA queues with UNMAP_LATENCY timeout.
Currently queue_preemption_timeout_ms is 9000 ms by default but can be
configured via module parameter. KFD_UNMAP_LATENCY_MS is hard coded as
4000 ms though. This patch ties KFD_UNMAP_LATENCY_MS to
queue_preemption_timeout_ms so in a slow system such as emulator, both
CP and SDMA slowness are taken into account.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a359f0f13 ]
[Why]
For the HW cursor, its current position in the pipe_ctx->stream struct is
not affected by the 180 rotation, i. e. the top left corner is still at
0,0. However, the DPP & HUBP set_cursor_position functions require rotated
position.
The current approach is hard-coded for ODM 2:1, thus it's failing for
ODM 4:1, resulting in a double cursor.
[How]
Instead of calculating the new cursor position relatively to the
viewports, we calculate it using a viewavable clip_rect of each plane.
The clip_rects are first offset and scaled to the same space as the
src_rect, i. e. Stream space -> Plane space.
In case of a pipe split, which divides the plane into 2 or more viewports,
the clip_rect is the union of all the viewports of the given plane.
With the assumption that the viewports in HUBP's set_cursor_position are
in the Plane space as well, it should produce a correct cursor position
for any number of pipe splits.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93aa919ca0 ]
When it only allocates vram without va, which is 0, and a
SVM range allocated stays in this range, the vram allocation
returns failure. It should be skipped for this case from
SVM usage check.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 907813e5d7 ]
Correct the counts of nr_banks and nr_errors
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8442bcad0 ]
By polling, poll ACA bank count to ensure that valid
ACA bank reg info can be obtained
v2: add corresponding delay before send msg to SMU to query mca bank info
(Stanley)
v3: the loop cannot exit. (Thomas)
v4: remove amdgpu_aca_clear_bank_count. (Kevin)
v5: continuously inject ce. If a creation interruption
occurs at this time, bank reg info will be lost. (Thomas)
v5: each cycle is delayed by 100ms. (Tao)
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc8e391067 ]
The pci_endpoint_test tests the 32-bit MSI range. However, the device might
not have all vectors configured. For example, if msi_interrupts is 8 in the
ep function space or if the MSI Multiple Message Capable value is
configured as 4 (maximum 16 vectors).
In this case, do not attempt to run the test to avoid timeouts and directly
return the error value.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-2-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95d0883ac8 ]
This patch ensures the gt will be awake for the entire duration
of the resume sequences until GuCRC takes over and GT-C6 gets
re-enabled.
Before suspending GT-C6 is kept enabled, but upon resume, GuCRC
is not yet alive to properly control the exits and some cases of
instability and corruption related to GT-C6 can be observed.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4037
Link: https://lore.kernel.org/r/20250827000633.1369890-3-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 106fc08b30 ]
The pci_endpoint_test tests the entire MSI/MSI-X range, which generates
false errors on platforms that do not support the whole range.
Skip the test in such cases and report accordingly.
Signed-off-by: Christian Bruel <christian.bruel@foss.st.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250804170916.3212221-4-christian.bruel@foss.st.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dbe644248 ]
The original commit be2ff42c5d ("fuse: Use hash table to link
processing request") converted fuse_pqueue->processing to a hash table,
but virtio_fs_enqueue_req() was not updated to use it correctly.
So use fuse_pqueue->processing as a hash table, this make the code
more coherent
Co-developed-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
