This helps avoid excessive bus traffic and I/O overhead on
slower HCIs (e.g., USB, SDIO) caused by frequent power state
transitions.
Add RTW89_DM_INACTIVE_PS to the disabled_dm bitmap via debugfs and
check it in the rtw89_enter_ips path. When set, the driver skips
entering inactive power save and returns immediately.
Signed-off-by: Johnson Tsai <wenjie.tsai@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260420034051.17666-5-pkshih@realtek.com
This helps avoid scan-triggered off-channel activity during
latency-sensitive scenarios.
Add RTW89_DM_HW_SCAN to the disabled_dm bitmap via debugfs and
check it in the hw_scan path. When set, the driver rejects hw_scan
requests and returns -EBUSY.
Signed-off-by: Johnson Tsai <wenjie.tsai@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260420034051.17666-4-pkshih@realtek.com
Improve user experience while using interactive applications.
Adjust power saving decisions under different scenarios.
Minimize latency for delay-sensitive connections by exiting
power-save on packet bursts and maintain active until a period
of inactivity is reached. For connections that are not that
sensitive to delays, keep the current aggressive power save logic.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260420034051.17666-3-pkshih@realtek.com
The commit 127ea8d0b0 ("wifi: rtw89: fix typo "frome" -> "from" in rx_freq_frome_ie")
change the struct field to correct the typo, but miss to fix this for
RTL8922D because it is submitting at the same time.
As RTL8922D is not enabled yet, this build error doesn't appear.
Fix it accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260420034051.17666-2-pkshih@realtek.com
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 2dc51ca822 ("clk: RK808: Reduce 'struct rk808' usage")
Cc: stable@vger.kernel.org # 6.5
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
I've reviewed a lot clk patches for parts of the subsystem that
typically doesn't get much review. Add myself as a reviewer so that I
don't miss anything.
Link: https://lore.kernel.org/linux-clk/?q=f%3Abmasney%40redhat.com
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Unmap 'base' if an error occurs after it has been mapped.
Reported-by: Tao Lan <taolan@huawei.com>
Closes: https://lore.kernel.org/lkml/ZNlSH+eWV8Sk3FYn@probook/
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Simplifies allocation by using a flexible array member.
Also allows using __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Tested without MLO, mostly in station mode and a little in AP mode.
It can reach 1.5 Gbps RX, 1 Gbps TX speed.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c0bd60ba-4e2d-41cb-8b0c-38454a341d7a@gmail.com
This is the entry point of the new rtw89_8922au module.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0d22cd72-4048-41ad-a4aa-511681e6ba51@gmail.com
Add rtw8922a_dle_mem_usb2 and rtw8922a_dle_mem_usb3 and their various
quotas and sizes in struct rtw89_mac_size_set.
"dle" could be "Data Link Engine" or "Double Link Engine". These are
some parameters needed for RTL8922AU.
Also rename wde_size4_v1 to wde_size3_v1 because the name seemed
incorrect.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/f9ac366b-ca8d-492e-83bf-440f8557c629@gmail.com
"hfc" means "hci fc" which is "Host Control Interface Flow Control".
These are some parameters needed for RTL8922AU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/474eb37a-a2e1-434a-b648-9e4b78e604d2@gmail.com
RTL8912AU needs different settings for USB 2 and USB 3.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/588bf309-4b92-454f-bfd6-5e81248abee3@gmail.com
There are a few differences in the power on/off functions between PCIE
and USB.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/dccdb944-c31d-483f-8d1a-a51bcfe23916@gmail.com
It uses the same settings as RTL8852CU, but the register and bit names
have "BE" instead of "AX".
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bd9e444f-257c-48c8-8adb-f58432b2c5c2@gmail.com
Skip most of the function because RTL8922AU only needs to configure the
RX aggregation here.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/71329cd6-0249-4654-be1d-74c8823f4888@gmail.com
Return early because RTL8922AU doesn't need to do anything here.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/58bf4dc4-dd4d-4caa-b6c0-e90749769cea@gmail.com
RTL8922AU uses a different register and mask to reset TX/RX. Add them
here.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/fd6ae7f6-0035-45d8-8832-49a053fd217d@gmail.com
RTL8912AU has 2 bulk in endpoints, not 1, so raise the limit.
The second bulk-in is for USB interrupt mode for SER (system error
recovery) flow. SER is not currently implemented for USB devices in
rtw89.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/3d30c8d1-fa25-48d0-b27d-7d634c5aa005@gmail.com
USB transport adds significant latency to H2C/C2H round-trips used
by RF calibration. The existing timeout values were designed for PCIe
and are too tight for USB, causing "failed to wait RF DACK",
"failed to wait RF TSSI" and similar errors on USB adapters.
Apply a 4x timeout multiplier when the device uses USB transport.
The multiplier is applied in rtw89_phy_rfk_report_wait() so all
calibrations benefit without changing any call sites or PCIe
timeout values.
The 4x multiplier was chosen based on measured data from two
independent testers (RTL8922AU, 6GHz MLO and 2.4/5GHz):
Calibration PCIe timeout Max measured (USB) 4x timeout
PRE_NTFY 5ms 1ms 20ms
DACK 58ms 72ms 232ms
RX_DCK 128ms 374ms 512ms
TSSI normal 20ms 24ms 80ms
TSSI scan 6ms 14ms 24ms
TXGAPK 54ms 18ms 216ms
IQK 84ms 53ms 336ms
DPK 34ms 30ms 136ms
Tested with RTL8922AU on 6GHz MLO (5GHz + 6GHz simultaneous):
25 connect/disconnect cycles with zero failures.
The 4x multiplier was also verified under adverse host conditions
on 5GHz. 5 cycles per scenario, stress-ng as the load generator,
max observed time per calibration:
Calibration PCIe 4x Baseline CPU stress Mem stress Combined
PRE_NTFY 5 20 0 0 0 1
DACK 58 232 71 (!) 71 (!) 71 (!) 71 (!)
RX_DCK 128 512 23 22 22 23
IQK 84 336 53 53 53 53
DPK 34 136 23 23 26 23
TSSI 20 80 6 9 14 9
TXGAPK 54 216 16 16 16 16
Legend: (!) = exceeds PCIe budget but within 4x budget.
Two observations from that matrix:
1. DACK exceeds the stock PCIe budget (58ms) in baseline on 5GHz
on this hardware. Without the 4x multiplier, DACK fails
-ETIMEDOUT deterministically on every connect, no stress
needed. This is the condition the patch addresses.
2. Calibration times appear dominated by USB transport round-trip
latency rather than host load, though hardware and external
component factors may also contribute. DACK stays at 71ms
across all four scenarios. Host-side stress has essentially
zero effect on observed calibration duration. Bumping the
multiplier above 4x would not address a failure mode that
this stress matrix produces.
Reported-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://github.com/Lucid-Duck/rtw89-usb3-gap/tree/main/evidence/crash-2026-04-11
Signed-off-by: Louis Kotze <loukot@gmail.com>
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca> # RTL8922AU (BrosTrend BE6500)
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca> # RTL8852AU (D-Link DWA-X1850 A1)
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca> # RTL8852AU (D-Link DWA-X1850 B1)
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca> # RTL8852BU (BrosTrend AX4L)
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca> # RTL8852CU (EDUP AX5400)
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260416045536.817930-1-loukot@gmail.com
It was recently reported that rtw_fw_adaptivity_result()
in fw.c dereferences rtwdev->chip->edcca_th without
a NULL check. The issue is that devices with the
8821CE chip don't define edcca_th in their chip
info. As a result, when rtw_fw_adaptivity_result()
tries to dereference it, the kernel triggers an oops.
Add a NULL check for edcca_th before dereferencing
it in rtw_fw_adaptivity_result() in fw.c. Placing
the check at the function entry avoids logging any
garbage values.
This change does not address the root cause for
this behavior, but it prevents the NULL dereference
and the resulting oops while a more permanent solution
is developed.
Tested on a 8822CE chip which defines edcca_th, so
this issue is not present on it, but it still uses
this driver and I can verify there are no regressions.
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Reported-by: Oleksandr Havrylov <goainwo@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221286
Signed-off-by: Panagiotis Petrakopoulos <npetrakopoulos2003@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Oleksandr Havrylov <goainwo@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260415052959.14844-1-npetrakopoulos2003@gmail.com
Since action frames might be malformed from RX or injected TX, validate
the size before using.
More, use struct ieee80211_mgmt to access fields of action frames instead
of counting barely.
Tested with ping on RTL8723BE. The add BA request action frames of TX/RX
can be handled properly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260414062229.21047-3-pkshih@realtek.com
The rtl8xxxu_dump_action() is to print action frames when turning on
debug mask. Validate the skb->len size to prevent potential broken in
monitor mode injection.
Compile tested only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260414062229.21047-2-pkshih@realtek.com
rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Fixes: cdb82c80b9 ("wifi: rtw88: pci: add PCI Express error handling")
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260413065926.17027-1-pkshih@realtek.com
The variable 'mimo_ps' is initialized to IEEE80211_SMPS_OFF and never
modified throughout the function. This makes the condition checking for
IEEE80211_SMPS_STATIC always evaluate to false, rendering the entire
if-branch unreachable dead code.
The error was reported by Coverity Scan.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260407123427.14612-1-chelsyratnawat2001@gmail.com
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix.
Fixes: 16e3d93c61 ("wifi: rtw89: pci: add PCI Express error handling")
Signed-off-by: Christos Longros <chris.longros@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260329073857.113081-1-chris.longros@gmail.com
Set both TX and RX FIFO trigger thresholds (TFT/RFT) to 0xF (half of
the 32-entry FIFO) instead of 5. This provides better DMA efficiency
by allowing more data to accumulate before triggering a DMA request,
reducing the number of DMA transactions needed.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k3-i2s-v1-3-2fe99db11ecb@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hardware constraints should be applied in the startup callback rather
than hw_params, as hw_params may be called too late for the constraints
to take effect properly.
Move the channel count and format constraints for I2S and DSP_A/DSP_B
modes into a new startup callback. This also tightens the I2S mode
channel constraint from 1-2 to exactly 2, matching the actual hardware
behavior.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k3-i2s-v1-2-2fe99db11ecb@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add proper VCO and PFD limits for versal based platforms. For that we
need to add new Technology and Speed grade defines.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add handling for SNDRV_PCM_FORMAT_S8 in the MVC audio CIF
configuration. This allows 8-bit PCM streams to be processed
by setting the appropriate TEGRA_ACIF_BITS_8 format in the
CIF configuration.
Signed-off-by: Anupama Kunkulagunta <akunkulagunt@nvidia.com>
Signed-off-by: Sheetal <sheetal@nvidia.com>
Link: https://patch.msgid.link/20260428051216.2746030-1-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a flexible array member to combine allocations. Simplifies the code
slightly.
Remove open coding of of_device_get_match_data.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[Fixed up bitrotted commit message -- broonie]
Link: https://patch.msgid.link/20260428204728.24103-1-rosenp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I noticed this define was incorrect, it should be UpperAddress, but in
renaming it it became clear there were actually no users. Just get rid
of it.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-viability-crepe-4e4c85e7c506@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
When prepare_message callbacks fail, the SPI core already reports which
controller the failure happened on. The corresponding code in the mem_ops
portion of the driver already reports the device a timeout occurred on,
so make the regular part of the driver do the same.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260428-porcupine-ninetieth-af00cb11b990@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
It has been concluded by comparing the gate clock masks and vendor code
between PXA1908/28 that PXA1908's APBCP, similarly to PXA1928's APBC,
has controllable reset lines. Describe these in the driver for
correctness.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
It has been concluded by comparing the gate clock masks and vendor code
between PXA1908/28 that PXA1908's APBC, similarly to PXA1928's APBC, has
controllable reset lines. Describe these in the driver for correctness.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The APBC and APBCP controllers have reset lines exposed. Give them
a #reset-cells so that they may be used as reset controllers.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
All 19 muxes in the infra_muxes[] array are pure mux selectors without
a clock gate or update register, yet they were defined using
MUX_GATE_CLR_SET_UPD with gate_shift = -1.
This macro assigns mtk_mux_gate_clr_set_upd_ops, whose
enable/disable/is_enabled callbacks perform BIT(gate_shift). Since
gate_shift is stored as u8, the -1 truncates to 255, causing a
shift-out-of-bounds at runtime:
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:76:8
shift exponent 255 is too large for 64-bit type 'long unsigned int'
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:102:4
shift exponent 255 is too large for 64-bit type 'long unsigned int'
UBSAN: shift-out-of-bounds in drivers/clk/mediatek/clk-mux.c:122:16
shift exponent 255 is too large for 64-bit type 'long unsigned int'
Switch these definitions to MUX_CLR_SET, which uses
mtk_mux_clr_set_upd_ops (no gate callbacks) and does not require
callers to pass sentinel values for unused update register fields.
The actual clock gating for these peripherals is handled by the
separate GATE_INFRA* definitions further down.
Fixes: 4b4719437d ("clk: mediatek: add drivers for MT7988 SoC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The mfg_pll_sel mux has neither a clock gate nor an update register,
and upd_ofs is stored as u32, so the -1 truncates to 0xFFFFFFFF.
While upd_shift being -1 (as s8) prevents the update path from
executing at runtime, the bogus upd_ofs value is still stored in the
struct.
Use MUX_CLR_SET to avoid passing sentinel values to wrongly-typed
fields.
Fixes: 710573dee3 ("clk: mediatek: Add MT8192 basic clocks support")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some MediaTek SoCs (e.g. MT7988) define infra muxes that have neither
a clock gate nor an update register.
Add a MUX_CLR_SET convenience macro that takes only the mux register
offsets, bit shift, and width, hardcoding upd_ofs = 0 and
upd_shift = -1 so callers cannot accidentally pass bogus sentinel
values to wrongly-typed fields.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Our parent driver (clk-eyeq) now does the
device_set_of_node_from_dev(dev, dev->parent)
call through the newly introduced devm_auxiliary_device_create() helper.
Doing it again in the reset-eyeq probe would be redundant.
Drop both the WARN_ON() and the device_set_of_node_from_dev() call.
Also fix the following comment that talks about "our newfound OF node".
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Grow our clk-eyeq family; it knows how to spawn reset provider and pin
controller children. Expand with a generic PHY driver on EyeQ5.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # On Mobileye EyeQ5
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
top_dclk is the DDR bus clock. If it is gated by clk_disable_unused,
all memory-mapped bus transactions cease to function, causing DMA
engines to hang and general system instability.
Mark it CLK_IS_CRITICAL so the CCF never gates it during the
unused clock sweep.
Fixes: e371a77255 ("clk: spacemit: k3: add the clock tree")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
pr_err() can be replace with dev_err_probe() which will check if error
code is -EPROBE_DEFER. For that the dev pointer has to be passed along.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use kzalloc_flex and a flexible array member to combine allocations
While at it, take clk_data out of the struct and move it into probe.
It's not used anywhere else.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Simplify allocation by using a flexible array member to combine
allocations. Use struct_size to calculate size properly.
Use __counted_by to get extra runtime analysis. Assign counting variable
right after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Simplify allocation by using a flexible array member and kzalloc_flex.
Add __counted_by for extra runtime analysis. Assign after allocation as
required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
