kernel/linux
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ synced 2026-10-16 22:39:48 +00:00
Code Issues Releases Packages Activity
1,043,759 commits 116 branches 5,798 tags 5.6 GiB
Commit graph

1,043,759 commits

This branch
This branch
All branches
Author SHA1 Message Date
Arnd Bergmann
ef5dcb1bc2 STM32 DT for v5.16, round 1 
Highlights:
 ----------
 
 - MPU:
  - ST boards:
   - Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
     with 512 MB of DDR3. Several connections are available on this
     board:
     4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
     Combo Wifi/BT, ...
     Only SD card, uart4 (console) and watchdog IPs are enabled in
     this tag.
   - Change IRQ level for STUSB1600 on DKx boards.
   - Fix SAI subclocks range.
   - Add ck_usb0_48m clock in USB OHCI node device to match with
     STM32MP15 datasheet.
 
  - DH boards:
   - Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
   - Fix SAI pin muxing.
 
  - Odyssey:
   - Set DCMI pins.
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmFplc0dHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIXnkg/+NahYkMMEa73+Fm2K
 sXtu5B2Px6Vh7V5dkVgC21dQjlYyyRtNfGEGIhN9lcpVrvYU4txzUKPDAgGXhnHE
 hT2gbfjY4WUer+REP//Xr5/WkLwIIN3f9b2c/b2yJf59gqjg/omSYqlnqv//356J
 h/5HGxNfHvTtN+yCrfMzdP5wC+vuGh44H38E6lSLKF0yNDbbe3wlntBtWn4x+Z9x
 fezKSbdKMOmlZbpdutL2LJoQUUq3nXzeVcCRgmcQOnx+ZR7L6G0pQaGgN7XyC3lX
 GGRfwHWWSX7oeiVorNfXduDlsa743a3u2t0ubGmbakXtOcy8uUzsD2efhdHZrzce
 X51BpbRhDSFLl9aJy1/lBmEH3y2InMXK/0zZiGlvB+6AH6xnCHCPD1obhZO9mTCK
 wYvWT5r2k5VElss42C8adSd3/H/VzO/5kfDgAA2kVOSgdUOuPdgss8JdCq2vAZZi
 M70zKBxGbVMIFudGONCekrp7B76658IDpyZ5CU9PkUSnGWSDH2NTmQw1vExVG65d
 uEFNpyyE8P9nK0C3OIgt40Wliq+bOnu4tVDGL/XNsMYhCkJrYCLrfnIK1ydi7eZo
 lv3e/EFT0RL9Rl2ttl7MLpq94QL+8bIZy9ei8O84tQGK9oL2OpmROs0VwoOOZzDN
 uWQE0O4quEnWJGwOlEQSytAQrQk=
 =zn1y
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvQYgACgkQmmx57+YA
 GNmekg/+McCuYR1uxymciqrOcsBKxXbQb5FmaE5H21HsccisCup+uutmZ8kzi9+6
 jkqJRon1FPcLy/CuZ5+1+wIBGedwUD3AKE6rPnyiPNYTiRIlmzxF1UCe5hQBX0nN
 dWVJ0fMry0dZ0bJtwhtl5RXbo9mQOjxv8LFpZ7bDF1eQfJzqjKylY5H7nZVhP8dn
 EZbU5fy4PuzIwra/silLp4DDpD0dEgdM+8rBafxa98gX3WHqNgvrFMY6P9lpKD9p
 wt+lhEXXjcmKwyDNp6wPgarmTb6mr+27wTjnW1HbJoT3sPx0eA8VutbdmQ7f5oQq
 fPXAxz8XPkjAVcYQRFCZf8OnH0vSoLbpxUfsjWcFai7uTiirt7+chMGlP3dtubsz
 h9d90sNc/IJEW/wzevTNSGW/ayhio3JshpgYPvcOG0i0Fxuf7eEyj9dR7ZPvVr9v
 iHsPSSTqUysKXmRWiQKw0R9Mj2/4QFJwAsRjPUcnQAGyDGhwOhTaF9rdL2f6Rddr
 usyEIFRWXPrObF9cMU1lZ7CxVtlFiUNJCabAutv+khd/IxF1iZcEi0FydTY1dYen
 hWEI6lYDrGb/O88E9a6WR/GyWXI7jwsB/BvpXrg51k5p8Pvq2yn3m1xPh9BXPKwq
 +WRbk0YQ8la7/oSn0cC3g1NRA0B8+WCeQdTsO5eYahfFshu3Jao=
 =X4fu
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT for v5.16, round 1

Highlights:
----------

- MPU:
 - ST boards:
  - Add new stm32mp135f-dk board. It embedds new STM32MP135 SoC,
    with 512 MB of DDR3. Several connections are available on this
    board:
    4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI,
    Combo Wifi/BT, ...
    Only SD card, uart4 (console) and watchdog IPs are enabled in
    this tag.
  - Change IRQ level for STUSB1600 on DKx boards.
  - Fix SAI subclocks range.
  - Add ck_usb0_48m clock in USB OHCI node device to match with
    STM32MP15 datasheet.

 - DH boards:
  - Reduce DHCOR SPI NOR frequency to 50 MHz to avoid sporadic issues.
  - Fix SAI pin muxing.

 - Odyssey:
  - Set DCMI pins.

* tag 'stm32-dt-for-v5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151
  ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15
  ARM: dts: stm32: fix SAI sub nodes register range
  ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx
  ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey
  ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz
  ARM: dts: stm32: add initial support of stm32mp135f-dk board
  dt-bindings: stm32: document stm32mp135f-dk board
  ARM: dts: stm32: add STM32MP13 SoCs support

Link: https://lore.kernel.org/r/9d52c3e2-a3b9-89f3-1896-7cd3560e7010@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-20 00:07:03 +02:00
Arnd Bergmann
f97ee3e963 Renesas ARM DT updates for v5.16 (take two) 
- SPI Multi I/O Bus, SDHI, and Ethernet support for the RZ/G2L SoC,
   - SPI Multi I/O Bus, camera, and video-on support for the R-Car V3U
     SoC,
   - SPI FLASH support for the Falcon development board,
   - eMMC, microSD, and Ethernet support for the RZ/G2L SMARC EVK
     development board,
   - 2 GHz High-Performance support for the R-Car H3e-2G, M3e-2G, and
     M3Ne-2G SoCs,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYWljoAAKCRCKwlD9ZEnx
 cGxHAQDrT+JszN8OkMuwJ55OlOUsI1xXqWpWMmjC40gSn57piAD/QiRYaaSreWk6
 WSPxrweQ4uNSntSHmFdo+lYs0ueryAk=
 =XkNX
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvQRUACgkQmmx57+YA
 GNnmEg/9H029WrZEgrP9EIBqlPSg/dSvXMLv0aG2ry7A/jiw8Tz48EdpE4lSUk4g
 fn7pBUHlXKQhbiyLbTHJeSobc5UUFEhKNZJ9P6MU5vTTKveaSgLaf+4HyCNbQZRu
 MaHGIYZ0xHvlJKT8MiwJ4eXM+1BV/VOfdfWzos1OYPzgjgQwXc2+TWSmoveIDXrz
 wW7qbexKkSNudvDogZX6MUkw55sO4yWgaLTmW18UahhQWcJkkCVr30cw2+MhMo4Z
 hL/quEdUJJxeD6jAf12WckENcjUI0iR7ZHqtVZanlBlM+BUk8Ap3Wc14mVi5esBa
 NM6Mbh6RaKS3lkWchELC1XlPXBS47CALtSuzOxDIGyU83p7m4Zl08bGcwMTY/vqE
 z9YIVtNbOtt6ZrFP1m0TAVealnDueAuPwcxOf9NpzLe2WL0+IT51F5Ikz9YXsIX6
 KI5wdvVUH6QCJcZo8a+PlAaQvcdoG6bLO77b69QKgqAyFYYsj8aLG9ui+iTig1To
 n6lFLO/XfR/zQihAHQRJ9nq1pxs8IEwdcCnWT8svy9DMPQ8rry1ooNYX6fNM/ESp
 Fo++uNpHqpblv750RwmNjGCSDrV8Xia8KHkNDWplFYL9utTJpi42eJOuH8XPF6aM
 fBAX+4hdl38ngXmgrKb7OxGUX5ZdglmbyxxhX8xm8VjUCOH0sZ0=
 =kSIg
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.16 (take two)

  - SPI Multi I/O Bus, SDHI, and Ethernet support for the RZ/G2L SoC,
  - SPI Multi I/O Bus, camera, and video-on support for the R-Car V3U
    SoC,
  - SPI FLASH support for the Falcon development board,
  - eMMC, microSD, and Ethernet support for the RZ/G2L SMARC EVK
    development board,
  - 2 GHz High-Performance support for the R-Car H3e-2G, M3e-2G, and
    M3Ne-2G SoCs,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  mailmap: Fix text encoding for Niklas Söderlund
  arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps
  arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet
  arm64: dts: renesas: r9a07g044: Add GbEthernet nodes
  arm64: dts: renesas: Add ports node to all adv7482 nodes
  arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes
  arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform
  arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform
  arm64: dts: renesas: r9a07g044: Add SDHI nodes
  arm64: dts: renesas: falcon-cpu: Add SPI flash via RPC
  arm64: dts: renesas: r8a779a0: Add RPC node
  arm64: dts: renesas: r9a07g044: Add SPI Multi I/O Bus controller node

Link: https://lore.kernel.org/r/cover.1634298094.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-20 00:05:09 +02:00
Arnd Bergmann
f6bfe01468 ASPEED device tree updates for 5.15 
- New machines:
 
   * TYAN S7106 BMC, a x86 server from about four years ago
 
  - Descriptions for the AST2600 ADC, which now has an upstream driver
 
  - Lots of GPIO line names. The OpenBMC project has adopted a scheme for
    naming the lines, and new additions will follow this guide
 
  - New I2C devices for Rainier, Everest, EthanolX, Mt Jade
 
  - Fixes for fp5280g2 which has seen some recent development, including
    the addtion of a QEmu machine for testing
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmFo/D8ACgkQa3ZZB4FH
 cJ4Clw//YJ3WSfsO2uAm2K49+2WS3h0Ern+YKY/sEWbQ/3YTNL1YGrtkXEMDoOUs
 zStOEpjVAuZ+3cdSZOrpB4CKSR1DaqF5PZ+jt5SnwXUzkkcIFeHfiiJHamJzMozx
 geZxaKOB16fJ2wadB08etdW9jidnSsROfqmOU94izb0jAilUEhngNy2jFf8T4wE6
 G20uPIdehV/+l8CNVm/8SEyFfYRxxPBHJXk96n81CWXvpoG0ZOPxIZQgjWwiWyNo
 m/wLoMLrkF9bNVxrBtvNtYG67SkIaG8U6suNwsx0X8a19ckq26c5lIto1AniRCKc
 tjq6z65yijj98VhE+Fnl/Jv7ZfhyN2qFfVPhCnTZjInkjexDmiM9oz47qy1xcgpY
 BSW6R61IR7bzIYg5gu8vzK1IwjM9xvzUSxM3CwYxxoZID1vpPpPq6NEAKeWNMmYp
 zQs8zYnZB7EeFF1TbcljMy6uu027PRgiErnjhEygXXem57YhYOEkkOpdifCaw/Gt
 7k5ei7Y7O0IoqFMmG8eq7ZAA0CQZ/+OboEsyxfkMtqIy0goiStdDwwtzLruDGX3I
 7qvZm5r4vHhMbJJvh0FNLp/H8dFx5DUteKRhfRRuw5zlEC3+0RgiisN9O/RbW/j9
 7/y1Azl0c0JDJTVVaD4LxVb1lvgC4/KRr47+EBicaD+KoL2Jd8U=
 =i5LZ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvP5MACgkQmmx57+YA
 GNlaDA//ZsLiuV3uRDOTGvYJB71eHd7gIiYIyCF+FmbKsEkSLEq7tpUWJiinZbIU
 7tyHdq3+rL5lhv/HIoUUo+w0Y51V09g2dl+q1HuScDqL7Hr+QVp6xV6+LwS4UvuP
 I8JZji8mhxTho+sO4diYYnojAn4ZhPnmESL9NlptR49yxLfvKdf2AEcYKMbSisvo
 367NnmTcuCgpoVKlc93vXshCdtSn83Y9tC8UnjzEJPP90lRhSJ8/kf4wEyoDtKKs
 t87AmN0otdUrEtbkYQqZ6iJ/ZyZPYmbbAxf1crlEoHMMLjI2Mp/i0/4l6ZL4K03f
 Rd6AzWPwX5rdWJ4Rq76jey2I8fL/2ofhw7ZDA9g4K6HCbxMJ2oa1LqXcsDc+AFdz
 w2xgcrOT45TmSUI7+vIO8HZI1nJPKrySEKknXfLOVbP4B5X26CMNWMTPIF4Cph8i
 iTHX10DmsIMmAWdiujDBYXQNgVRh0/bR6zq1GT4n6r5yekYfohaVpJcv5ENI0DTE
 VsW1b4tlSQVKsrO2cR55UWx1fPRVA7rGtX7Ge7zRIPt41hRZ0cqu1koWmS4iqfU1
 Q38pV2jC5ov8h1bOwBNqHmJKQFAleNEboHoadnS5yHJLp/BfxQwliyHEWGLAtiLt
 plbbbieEcC8Odgfjp69ATU/txLwEy+s5egLnCq/fRKD7rFrQW+U=
 =6eyi
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.15

 - New machines:

  * TYAN S7106 BMC, a x86 server from about four years ago

 - Descriptions for the AST2600 ADC, which now has an upstream driver

 - Lots of GPIO line names. The OpenBMC project has adopted a scheme for
   naming the lines, and new additions will follow this guide

 - New I2C devices for Rainier, Everest, EthanolX, Mt Jade

 - Fixes for fp5280g2 which has seen some recent development, including
   the addtion of a QEmu machine for testing

* tag 'aspeed-5.16-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: fp5280g2: Use the 64M layout
  ARM: dts: aspeed: Add TYAN S7106 BMC machine
  ARM: dts: aspeed: rainier: Add power-config-full-load gpio
  ARM: dts: aspeed: p10bmc: Define secure boot gpio
  ARM: dts: aspeed: mtjade: Add some gpios
  ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and Everest
  ARM: dts: everest: Define name for gpio line B6
  ARM: dts: everest: Define name for gpio line Q2
  ARM: dts: rainier: Define name for gpio line Q2
  ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
  ARM: dts: aspeed: everest: Add I2C bus 15 muxes
  ARM: dts: aspeed: rainier: Add system LEDs
  ARM: dts: aspeed: amd-ethanolx: Add FRU EEPROM
  ARM: dts: fp5280g2: Enable KCS 3 for MCTP binding

Link: https://lore.kernel.org/r/CACPK8XdrMzY9tzdof7KpzxKquTo7GcWW4N9Zqwtmmu73C7htXA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 23:58:43 +02:00
Arnd Bergmann
6fa496fd7d ARM64: DT: HiSilicon ARM64 DT updates for 5.16 
- Add SPMI PMIC support for the Hikey970 board
 - Correct the sp805 watchdog compatible string to match the document
 - Correct the operating-points table name to match the dtschema
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEQeMYD8qOQTc1R/snC8hXbtmJZlwFAmFo5vkVHHh1d2VpNUBo
 aXNpbGljb24uY29tAAoJEAvIV27ZiWZc/48P/00Dx5XKqDIJKBnTJK07e69Mgusr
 VulJF4Dub7tqniEbFQLAjynvAR6mRR/ziasD8B/V7LLMm+RO9/KQ2UNm+08YSXd6
 1JYsoCj20BLsIMnmGMOPaylJoZyKRyKYDHjtegr+MNkKib4aGMGhG/klbyVTjV/Q
 rTi/J87W5WM8WhsBkdVpbI7+xA7lLA0vOWPRANtaej4pjIaUQ6ibtt+AziBRC0zj
 Ckec/TP/JHO6sDwpcWVgdWW4k9ofohuEvpFttialrmBVrIRn3lrQK8V+UIrBNVcA
 fneSWjgexxxRYemw07kAWrVZKVJCvSHosIcp7BzOYYdU+Vd3GRILvvuWEgbBjHCY
 tzve6uVw0UQMZPA6jYMlvA9bPBL3JWuXByWIjtKBH0C2QX3aqTbuoyL9aAVy7C0S
 RMpAWZ15ED8YNef0HykQK2+HE0G4p8WyN1zjmMCshjOsjXPQVEKX2bIZ05cF8KX2
 Q3zY6OdznV1H6PSlfVtRzbVM75B+158Pxw/SdTlIMiGiXjfxdIEYruEM6Ej8kxqU
 +QakyDIWjNSwaB6lt1x+bZe7O3GvMkRNb3HhKoqf9j7e4JhZH8hg3KyDdENgcPzb
 RLNVKN65Wwz0SyJZNlRKlF6IzDjeV6v5aXY7eLUkj75uIRT0vI6MYWJhxo4sx/PA
 kGPjXdKTEAsKUmsK
 =xa9d
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvO4cACgkQmmx57+YA
 GNlB3xAAsoHs6hQFzZmpeii7DKrchYSBUvoEorG4boHtPiAQ7mZTpAW2tIgO6F0S
 P+CugE0u7TGuApVCAB6TVDj1dxEZJBl5xf0Mug3m/cpc0DukJj28QSbMztfAAl9s
 /1w3AVSHM6heD39a09ePxSaHzRn7Bl+hyTAnDkZBH+OenkihpMgaBdGBOrqkS95V
 1HBB/wdCNF16hB8DyerZPlSpwwLR9zpd7Ncia4DbhIzfW9ppnIK4OdrQbZKDU0E2
 55Fsef33YJc+c1FMY5+MfV0U2jpL4ozvRpIvBEU9KqZStWntriV71TbWH2iooRbg
 +mGaGR+JjxND1UEe7/eNqVgV76qUW8j8+sWNfRwAOwgX/UnZBU2+0KBdvlC7XuhX
 idkBGgjrz4tsMfnSkwjuFs2LE9KerNKCBVIC6EDA2Gx3DROehSK5CBizidQuK6o4
 ap/GALZQHZhFGYHaQjtR5w5y9Ps5XS3LGWnsvftNvhb1ynqOHW1aknlfTQEH39D3
 g/7gclkti0dbwnRuoWE4W9DNol/THnaCoV7zCWerI7PlPWkf/WMWLlggdValpJch
 MBFxFVRsJl2od6AgDw1PzV7XhqxYWsL09RlqlhILAlfCf+QdmxlP/JtxYiCPYaBe
 KIPt1MU1Tdlt/kJ02sBM34N/02zTKJVUDgYTsi4tG3JhVo1pxls=
 =Z1IX
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi into arm/dt

ARM64: DT: HiSilicon ARM64 DT updates for 5.16

- Add SPMI PMIC support for the Hikey970 board
- Correct the sp805 watchdog compatible string to match the document
- Correct the operating-points table name to match the dtschema

* tag 'hisi-arm64-dt-for-5.16' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: align operating-points table name with dtschema
  arm64: dts: hisilicon: fix arm,sp805 compatible string
  arm64: dts: hisilicon: Add support for Hikey 970 PMIC

Link: https://lore.kernel.org/r/6168EB53.60503@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 23:41:27 +02:00
Arnd Bergmann
514d507811 Ux500 DTS updates: 
- Flag the janice SPI display lines properly for the right line
   semantics.
 - Fix some errors in the Skomer regulator configuration.
 - Fix some SD card pin configurations on Skomer.
 - Assign the Skomer SD card a 300 ms power-on delay.
 - Rewrite the battery nodes to use the standard binding
   "monitored-battery" as used in the updated bindings, and
   provide the right Samsung battery compatibles for the Samsung
   phones.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmFoXYYACgkQQRCzN7AZ
 XXNICw//a0/qDebSV6qekbcSK+2vAERZnmyoVT9Rw3slkpd1VYU4ubefZk8rsD14
 ZfRAy4ZR9/rYuE6oNrSH4SseRzrSc8hINjYjGJPw993p9yzBt+2wcTTN0jweqjzh
 xE2sPQTxT0Z0XsDThimELwG13ew2poh4xKx2qAq/BK9vEC1qDIIgAqDjOg66OFs9
 rbXj2OStwY00HeLIgG4wQkU1KMnUEUaAiUv89rsla1f3OrFvHbBwh848AkiT36NJ
 wELGrKXSDeAfWSj+3i015BHWMJqf6tPXtSusN9//X+LNDfWGHAMLQKabsZwqruRV
 GOUxsTPPcFSQi+ZMy764hSn9xBFlEup2A8At2An4Hd0C/IFGZWNImITmfRHWJNdY
 F1tqcPLV/w3OaAToLxV8lF2VcLSg+QKj+mDRmuVZxqPpjDm3fvwHzBkkQlbvDfYw
 5R0EkGR85uQuNkQ9sPIQqBu6ybXM9KSGJ56GyPM+oIX2a8Q4Oyey95kT+S7Pp8Bk
 SBIhrnHbBgaisCe1S8M5VsnZ39BAW1upFBeOCGCV2t4l1b7n624oJxGDgv354Y89
 evxGYJOEvevEqHOF2XW4lKYpcIT3sB+b9YB8sNQGhiEaphrO4gPSdEeDOkeOnN2E
 NHrEU43I6NxzYFGGc1NWBWQ9Ga/cPK9ZIyc6mDeHZdP9P0dzeC0=
 =VZoq
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvO1oACgkQmmx57+YA
 GNkS4w//fs7Pf4qZUHTEtPl3g2lIlCpo4TjHu7v7ulEBmR1TEFVkqTCbCs+RLs6k
 9oQKU4+TFml/SeNg091yv8qjEA5lcfyM58Y6RQhsTrkoTFE23p9T6L1RP6qxtwg1
 SC4TX8/UlsQnN7aevcbcROX1eVwPS6ePJLagPr8BrYbauF6QgUHZ9xK1InsGnfFF
 wLLaFrscQHk6Fyyx+qRNl45UsRbBMjOaHwbw9IXtUc7C7A5ZehlVuavh93yzNOJE
 eoaqJyXEwFp77y24z9VESiCjojgDIbURWWy1/zpwPO/C7UamGeEN+LA857m+wbvW
 lg5qqTIeHfzmBXrmwQ2Cn7qkn23alGfWWA3QOyTAyW968EGU8TqkQ8N6GPsgFVgL
 r60we/ddcYhOCyEsnO3ezS2pJ61TA1nvnLkxFU8wzbrSGIU4i6UALG1k3v0L2M7W
 KvwbMusFKcDS71+XKGhGnUF3sBDX1v/IJWtmagWd/gpekJ4wQbnH+/DyL6WVWodn
 Dd7N8QNJSoKwXRLpw3WCf7m7IZujYW/YyTb0Usbn0dI4NCtTJ1M+0vnWttVEQTrk
 z9+jcJ15SOu/7OCP2jcBNtDbXsJ+8aNmQ2l/dXBr/+ZPQH3Fw+QMByshH0izSNYy
 nYIrwf9LPJx5K8/ThjVJw2CCzasHBjrEr5bCO6gwA2F3mJ/+9jE=
 =vIcZ
 -----END PGP SIGNATURE-----

Merge tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Ux500 DTS updates:

- Flag the janice SPI display lines properly for the right line
  semantics.
- Fix some errors in the Skomer regulator configuration.
- Fix some SD card pin configurations on Skomer.
- Assign the Skomer SD card a 300 ms power-on delay.
- Rewrite the battery nodes to use the standard binding
  "monitored-battery" as used in the updated bindings, and
  provide the right Samsung battery compatibles for the Samsung
  phones.

* tag 'ux500-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Switch battery nodes to standard
  ARM: dts: ux500: Skomer eMMC needs 300 ms power on
  ARM: dts: ux500: Fix up SD card pin config
  ARM: dts: ux500: Skomer regulator fixes
  ARM: dts: ux500: Tag Janice display SPI correct

Link: https://lore.kernel.org/r/CACRpkdYf5GwRvG1Gemk4mE+aw6UnAVTY8OudwsVNPQXThHXu6g@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 23:40:41 +02:00
Arnd Bergmann
4f0c2be3d1 This pull request contains Broadcom ARM64-based SoCs Device Tree changes 
for 5.16, please pull the following:
 
 - Rafal updates the BCM4908 DTS files to produce fewer warnings by
 fixing the UART clock name, moving the reboot syscon node out of the bus
 node, and finally updating the NAND controller node names.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmFlvZ4ACgkQh9CWnEQH
 BwQAig/+L8jeVcubM0PaiXUXp7qRPuKr8i7fF6DVwagMUSo2T9XWz0hOPv2qZL82
 d6zp+ZBr2kD092WB0zIGBSt1JYYvl1/CO+D8ksjn8TH+6NOFExzhnUzGlHPw1bsU
 Q6iUjKzFsKVwIe/qRNIieI0w991fJwU0UFcj858V3CB7kA/hki13w8WyPse9Fl6h
 qEgN5FZ/rb8OPUchZGqbrE5rYNnXWw8IpL12QLosOOhChspN/gTKxyyTA3w0YO0T
 mZ0JFQoW5mQVtjkG/G+3LfWCcRfmdiuaw50iJE7MUFZj566bKlEMyYnleQnTG3uS
 j+ukYzB1jL1EUCDU5dlBThHncRo146J+KFZ70f7Cx3o2lp412K9vnpZjoVsUiOOE
 CTpa8MUExiQ3gc4T38CEaue4x8LdAtXBLfwV1U6v02OVzexJOs8nbSoN6L85CsM2
 t4oi7ZVecogirmTkP7TzmDda3bIAWslrLO/BPOOeKirlGYaG5sSy2ohDXBtp2QgC
 MP7K26kcL/68SqeASJt4jl4vx0fByalYhS0ZbhoBtT/tG1wwY9J2krXnrM2koTVa
 XP6RoUPblUuNSgZqauzp1FR6epoVc4ox14j3gYLoEfCemAlHoF2YfhaO6KRZ7K8b
 7KAhW55X6gJBtyF7jpkDd6aAKJwHwD22QYEiPEIFrwRAgJKgcXM=
 =i+W/
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvOwUACgkQmmx57+YA
 GNnBnRAAi79rUBLoOxdvWrdTT5hJaMAPBSaeu6rPvM7VRPSGwUbFdE+oFhkw383P
 dxYsIw/fLapdWjPBUmknWjqspazB8MdUT0o8kpT1y7lJZ1T//W4ZG6nBAAbaeeI0
 3BciNN+xkF+7ksVWkRX6MJhG3qljN123oUdxZPT+X/W1fvFOs7RoGnRFpAxpVG9t
 qoTCXbLPODU+Ug9p+5HhUIMzWWtqF5xItD53GgTHKv0XLkgMinq/ye/8BH9Bps6J
 b908GCRvZKlgxSM/tX1wygJu+UDAHkjOgoZLtgtZPoVrLHx4QbyBa1Ut2U5RXe3f
 1YGSyaST1AuYtNpkn6Srn9yWH9ZsZ6QunHt4kYBKrjH7JeyLOcvPyCbh2gmyoD5W
 ftdTE49ggN69LVTsoWhnTHNE36zXWEgmu387fCo+ABKudZZfzzDRnk4tK4vmcDXC
 OnOkOXVagD7YMmyhmH2peCgbjMhH7cHUWBgw50SQvQAc4ueMfdogqGZcU21ogsLN
 +oAp0vwHsvS6a2Yv1ivUNRt0YiMB1PqENYR4zUvBAYmG5G9lQc2Szg/H3tK1KOJJ
 MUjT+9Cb/IUr9SUt7+Yj4TufeONQjvt+M3Q76fx/ziwLqjFDMjbVWCR5Th8OFp8R
 I7hVKCeXAgM/ttWMSnq8HRyrvWfjlLlm/FZvoj1o+lHpkzxKr6Q=
 =wvRL
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.16, please pull the following:

- Rafal updates the BCM4908 DTS files to produce fewer warnings by
fixing the UART clock name, moving the reboot syscon node out of the bus
node, and finally updating the NAND controller node names.

* tag 'arm-soc/for-5.16/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: bcm4908: Fix UART clock name
  arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
  arm64: dts: broadcom: bcm4908: Fix NAND node name

Link: https://lore.kernel.org/r/20211013174016.831348-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 23:39:16 +02:00
Arnd Bergmann
4d3e49a375 This pull request contains Broadcom ARM-based SoCs Device Tree changes 
for 5.16, please pull the following:
 
 - Matthew provides a set of updates to the Northstar Plus Device Tree
 files to fix a number of warnings, and prepare the files to support the
 addition of the Cisco Meraki MX64/MX65 wireless controller devices and
 finally adds support for those boards.
 
 - Rafal continues to provide updates to the BCM5301X Device Tree files
 in order to fix warnings with the various node names, MDIO muxes and
 memory nodes. He also adds support for the external switches on the
 BCM53573 SoC and adds Tenda AC9 switch ports.
 
 - Christian provides the description of the Ethernet switch ports for
 the Cisco Meraki MR32 based on the 53016 SoC
 
 - Arinc adds support for the Asus RT-AC88U device based on the BCM4709
 and featuring 8 Ethernet ports over the integrated and the external
 Realtek switch (not supported yet)
 
 - Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
 does a number of preparatory changes to get there to the Device Tree
 files before doing the actual addition
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmFlvtQACgkQh9CWnEQH
 BwTOUA//bomocJlqdnsIyRRVrpAxDnaNKmFtEAIGb1okHeocweIy1HEXI4ssAmiR
 R+k74MpsgMyi9AP6zcJLAtkQCYw2xn01MjRfpidX42Qumvz8c/ZCKrlTd2YoUvGI
 IuhIjp2Mmb07Gte72tQ95WAP+86p4B7Q9P321hVv00ENXbI3tyO+ABjctLmFicFc
 YqQChdBMVQOBKS8xYxjLu8kJyYbuGIaA/3xhxx8y6PQ/TL8GQVwub79Yngg/XA6t
 1hG1Jw+yRQlX2nM7rdzuALKUR1JBgo14yBrStyboLzgHOOTvLYE4JSq0Q5eRZxvw
 nrNYuxV74Z3J88OluP6qVUcMfj14c88dwueQKlvoZuCuSbIk3r/dbb8sijfud4JU
 GoUx1/+grfn0BK30UyF4p3DFoAIC29YlfDi6VNAfNN7hOpT+yXSo/01J4/twQfG8
 0iruWA2dPVjL+4AMBW32fCx+6s59pLNS/psILgb0+BTeE9kqmmFgiPoiJOlWPztn
 loOjVH6eijfSUReUkExTMl0VU93Rgy3f45aM4HHWnHyy0/BlYaoQ0SjZVc0YMIhw
 lrfEutO/MXAik5Ga+BlG9e8OG7LHhcZmxt3NX1FLUpreLPdgz47aqjzbDxV2WSdg
 y0A6Lo/2tqCbljYOWgiNNw6XAg6z5e5Bb4DFkybsxUwHhVNL7zc=
 =KGAI
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvOiUACgkQmmx57+YA
 GNmQ/Q/+J2HunngXPMz68OysNCQ8tvT2eWRQo5Ju5KGiabXrF7QNeNPysxAwhvZv
 Wv0Bfg0aONEjfJgonub0ezKDd/GrsBxOaHdA/5VNcCGZyPvXfRRkvCkFggI3oQsO
 wWWX523kcsLyck59kixLOxJdHjplcwV/Hj6qW0+iGNCglVRDL73DoVzF5nqtUgMP
 WXcQl9L5YTjnCmRJwsQylqIZJzGIEhNwr5wYp/RtEVe9vdJ2uQ74PqLcZJZCPD1g
 WpMNgAS0w5ZocIbyRlvN5SmLI8gM7nwwmzp9Eq2q6bzpPKfBBcrSySPNEj3avTCc
 Fpb1GwlRECTlVc90eF1Om6garFkdO6xorxaagqQAebxSOZ5uWH5urzfUVSuKVBDv
 uTWUNXFghukjHVdnv1rblxfRlIzj5cFats/0lQTzjo/ankQMBs53vZ3720TV2uq7
 D5go3cd4V6ebVP0NoINYs+4iO2BaXA32g7SwGier8X6p2xPVKuZ8+18+wytE1RoY
 hobWTwdY5DbsfV1+z1cksNHrgY1NRXVlKEw6gkw5RXMf2GZ7XSO1CpzNEHsp7J4y
 S51bmO7LZqx8wSq+WCQjL0RzQbzSmls28ofyiEAlsGG0wzYdRWeLbdqU7UijgFRc
 r8B0ydAiKS/NH1r3hh+ht+j6TG2vCxm8G1KWYjZXOM3oJyGnbpQ=
 =Ptpv
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.16, please pull the following:

- Matthew provides a set of updates to the Northstar Plus Device Tree
files to fix a number of warnings, and prepare the files to support the
addition of the Cisco Meraki MX64/MX65 wireless controller devices and
finally adds support for those boards.

- Rafal continues to provide updates to the BCM5301X Device Tree files
in order to fix warnings with the various node names, MDIO muxes and
memory nodes. He also adds support for the external switches on the
BCM53573 SoC and adds Tenda AC9 switch ports.

- Christian provides the description of the Ethernet switch ports for
the Cisco Meraki MR32 based on the 53016 SoC

- Arinc adds support for the Asus RT-AC88U device based on the BCM4709
and featuring 8 Ethernet ports over the integrated and the external
Realtek switch (not supported yet)

- Stefan adds support for the Raspberry Pi Compute Module 4 IO board and
does a number of preparatory changes to get there to the Device Tree
files before doing the actual addition

* tag 'arm-soc/for-5.16/devicetree' of https://github.com/Broadcom/stblinux: (31 commits)
  arm64: dts: broadcom: Add reference to RPi CM4 IO Board
  ARM: dts: Add Raspberry Pi Compute Module 4 IO Board
  ARM: dts: Add Raspberry Pi Compute Module 4
  dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4
  ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi
  dt-bindings: display: bcm2835: add optional property power-domains
  ARM: dts: BCM5301X: Add DT for Asus RT-AC88U
  ARM: BCM53016: MR32: get mac-address from nvmem
  ARM: BCM53016: Specify switch ports for Meraki MR32
  ARM: dts: BCM53573: Add Tenda AC9 switch ports
  ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch
  ARM: dts: BCM5301X: Specify switch ports for more devices
  ARM: dts: NSP: Fix MX65 MDIO mux warnings
  ARM: dts: NSP: Fix MX64/MX65 eeprom node name
  ARM: dts: NSP: Fix MDIO mux node names
  ARM: dts: NSP: Fix mpcore, mmc node names
  ARM: dts: NSP: Add bcm958623hr board name to dts
  ARM: dts: BCM5301X: Fix memory nodes names
  ARM: dts: BCM5301X: Fix MDIO mux binding
  ARM: dts: BCM5301X: Fix nodes names
  ...

Link: https://lore.kernel.org/r/20211013174016.831348-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 23:35:33 +02:00
Arnd Bergmann
f202bd97c6 Samsung DTS ARM64 changes for v5.16 
1. Match Exynos5433 DTS with dtschema.
 2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
    design for automotive for In-vehicle Infotainments (IVI) and Advanced
    Driver-Assistance Systems (ADAS).
    This pull request brings very basic support (pinctrl, UART and UFS
    storage) with a development SADK (Samsung Automotive Development Kit)
    board.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmFnB2oQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD19qQD/wLYOTIp032qz78kpR/zzgKG6ZvLwLDLmua
 WOQEsUFvQWQgP7iZ5qIMvjhxAcGYjLstsqv1ed8PpiXFbwacAZqSszFE5jRqkBbK
 cXa2+lh3iSDDvr/Jznzm+17KXN6/6qbkgi3xrRXbk7Ih7D230Ox6ztknP3IYhGU7
 OMuL1nc/gHph+nZbPD9N8Ts7f8D3RtAkYX3uWWVd0JOjaoE2f1Q/18aYEO4NM93n
 eLUi8RiW6LerW2RLaSFqzUadV5RyANp19UdE5rIlgadE9XzX6vf6LCj3xmZVTrV+
 9w97RWsrqWpm3OiMEVL7gFeRgYyV4WcVaYWtmzYok8WOJJN9qGX+oUBaeiBMWula
 sSEVcVeTzAhzjwbArPCn4ZBizX8nb3G0skGaHpobD5afBygw5tf/wo2lRMAXOb9z
 VyVzgP0iL7W9kOUoaTRiInFkdRPcdXuo0skg/pBfaewU5M61D7LfmNEq4zjJsrdY
 AN9g/VTwA7uoT0tkK6YjTjdjFiWnuBzeKGgky39VdhEe1uJempjdBDz+nfbPG2K9
 uh+Cn5ojIZG11mWLpee/+nwfECeyERjzVNNjzoGf4MStjn33p7yMgSmmLbphGn9X
 YlzEKiiAtMXnsYAmKFXskoHsjiEmSyYJQvyYDRJZVYXOCYX0zsAd4cKBbwiJ544m
 lbvDwo5Jjw==
 =MZjz
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvMUEACgkQmmx57+YA
 GNmZhRAAjJa2S4Ggle+FmKnhubdeAPw8Q1G//Mq4xJbdxNrzDTgg9kNONbIUes+K
 FaQ9ok4Ql5jo4VorI0l8g4I6h+IfMJm3FfWrirm4SbSTkmCJa9g7+DJHyfBqsGCv
 VMrY+FVY1rfRCilT2aRU/1D6hzexHjxRVdR66Zr5Ry6xGWuu7AP4cz2Rv/NMw7FO
 vHZasX+7KAKTGCJ4wYDAUeN67tImt2ykRKC+OCST46tWHyuUkqJEVNHFnHHfgN0/
 hXMAXCWs4gL6CAeBhWEfEs38LgzzEwWodD+lS/uZwjF95q8Ns1ujfWJpaY+XWVvU
 TT+h+02770O/C6uROIOxZbVISM2R6WP6w6+Jyjk5HjPwXO0TfYXN8xgf8Vkqtw/8
 nWuN9qwfku23AMuDftTVlcIy4pPmYhM1O8xd/31voQWFGEEcgTSfP9DRi2ANwkAY
 /yDScK49q1jAylx/HvVbVkKyZA3HXAhqk4sQw9/7zT3KDG0pVVKzGuVU6C8AdzLk
 CyueUL2tWd/4seowWlsSB1knCqVAgFXtMxTjDy5QwSnreXcJwLOIKfAusDGm76ur
 6+YEflIwm6bAckmb/VnLsRdIWizXLl8V/dtDQx9mBjUUlWD64BZemRZZyTkWrGtA
 CCfUrpAoegWe7Um44ZSxjF6M0c5q+E4IUSIfir01hL+m8eBHSR4=
 =Bj2z
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM64 changes for v5.16

1. Match Exynos5433 DTS with dtschema.
2. Add an Exynos Auto v9 SoC and SADK board. The Exynos Auto v9 is a
   design for automotive for In-vehicle Infotainments (IVI) and Advanced
   Driver-Assistance Systems (ADAS).
   This pull request brings very basic support (pinctrl, UART and UFS
   storage) with a development SADK (Samsung Automotive Development Kit)
   board.

* tag 'samsung-dt64-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add minimal support for exynosautov9 sadk board
  arm64: dts: exynos: add initial support for exynosautov9 SoC
  arm64: dts: exynos: add proper comaptible FSYS syscon in Exynos5433
  arm64: dts: exynos: align operating-points table name with dtschema in Exynos5433

Link: https://lore.kernel.org/r/20211013162418.43072-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 22:57:37 +02:00
Arnd Bergmann
54dd38340d Samsung DTS ARM changes for v5.16 
Minor cleanups - from undocumented or unused properties, coding style.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmFnB5wQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD16rqD/wJxCzWkqNgnjJb8vkc3DXzQ1muK4H7fet7
 2MaBjdII8GNM3SpANu96OEH1lgxph5Tpq0AmFohZAH/FZS7EU7pFiZE6TDqjK7p2
 24egSrinqmUZgovinUvhganyhRnMnTyLP/YNrFFS9/yopbXOgrhNWfG4P+t8LNuw
 sT31sCqmnrwmjfcp5F1yvZxekpDXt+suToUd0KaWbdu3xK8XZ17hSXJM/aSLdiHU
 wR8wv7eia9gxQ+RRt+UzW8LbLLoL2UYuj5fros3JDvtROVdLJCl1E01pHPZzfo/L
 P1Ez7YxlhmbhsJY/Z6Ref/STZQYAqmOyli1ZDWJfnT+k+x6Dy7G2sWAAsYVHwMs2
 /LDPMB+xNm60n7OyrkJ7xjgKSRw1peckc2mQMMDg7wbSnsrFMP1pqj3yhcNGk4Bl
 JhCEGDr7ufdRc915/eGIatxE3CnINd/TwyWWGGXN+KHcwYfFnpmDSVdyrM/4DS18
 HADgKyoCwKANOJuO4XWTc86wTyXqXbaw8+gzIa/Jag5jIZinPMgy2hfxaty+mLQz
 Ob7P3ci+k9lxw1aHAaN+8FOrrY9tN6johKG4JkK3DlINZgv7WjfWJaEbiKi3vYQP
 +H2cKSk6OwlCupR6hDq9d2Q1em7GMy/DXRLd3IMYcDhbKl+po6kIRc6vzrjXTJok
 m/lHNVT4dg==
 =p6cQ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvL1kACgkQmmx57+YA
 GNmxEA//f/nbRb9jE7nRupyKIAQH/l6x0MKV5NVQSF1YjW1o1Vc4hx/hgCwDtiiR
 U/zVkUWpktvjLUyHX9MBAivDT0YooiTs9Vhym3fOVp/u9CEX7GzIFXCi0a0cguNj
 PIJ+aLT8S87O/DlrbrJI08ewtQw3URQXzE2Yd/WH6bf8f2c/ZAo/hSbfyA7t8yCZ
 B7UcYAndhlr7NhAvvSKjnm1BdpH9Ix3lNz6hvaWYbb4uzV4ghwzzV207VTvosbqg
 qIqhbLpJRFtQv2sDg3lzM3XClw1s4ZvXc8wbU+qklH2O5wgWyGPO06jRuk16NjUx
 t2L9FFgV+YVt35oBjJJ4K5ibXzXNhEKxZULKEWgqsTtDETVe47Enec+HJdlcaEdy
 eXswHN4Oq7F+QaSjoWKVG4A96lXhaXo+dUqjlkjfNuzQcWL/Gl+1vNK6T/uQKJn/
 ftNEp/LP4IKv9ToI8ARLrr5eLCSbkZ6Wzw1pCL5egLmnopL7XqxKq5GqrfjKqwuD
 voYo70Rq4v8PubaJ3s6vrKG5qOIPoA04RV8JU+8a51vWxD1srMnAKGEqSnUvggoA
 axcXOcM8KWv0u14hRoXu8XynKlBqj3JcVX15t17eqKQBCD8DmuVjBrLoAyMljih0
 c8t+9VXHSYkOOjkuszTRHacsc7QBRwUtS16SQO/AeYS031EWlsw=
 =mtv+
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.16

Minor cleanups - from undocumented or unused properties, coding style.

* tag 'samsung-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: use spaces instead of tabs around '='
  ARM: dts: exynos: remove unneeded DVS voltages from PMIC on Arndale
  ARM: dts: exynos: drop undocumented samsung,sata-freq property in Exynos5250

Link: https://lore.kernel.org/r/20211013162418.43072-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 22:49:28 +02:00
Arnd Bergmann
c7613530d1 Qualcomm ARM64 dts updates for v5.16 
MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
 firmware paths to the device specific firmware for modem and WiFi, to
 allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
 support and the interrupt configuration for the accelerometer and
 magnetometer are corrected.
 
 MSM8998 gained descriptions for the multimedia clock controller and
 iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
 updated to access the CRC corrected value space, the white LED (for
 backlight) found in PMI8998 is described and GCC gains references to the
 missing XO and sleep_clk reference clocks.
 On top of this initial support for the Fxtec Pro1 QX1000 is added and
 then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
 with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.
 
 The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
 added, with support for frame buffer, GPU, audio, video encoder/decoder
 and touchscreen.
 
 The USB controller and PHY found in IPA6018 is described to provide USB
 support. IPQ8074 gains a description of the SPMI controller.
 
 The highlight on SC7180 is the introduction of the just released
 "Homestar" device.  CPU power coefficients are corrected based on
 measurements, IMEM is described to ensure that remoteproc relocation
 information is carried to post mortem debug tools and a few smaller
 fixes are introduced.
 
 The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
 modem, CPU topology and updated memory map.
 
 On SDM845 the "Limits hardware" is described and increases the
 throttling temperature of the hardware from ~70C to 95C, with up to 30%
 improvement in benchmarks as result.  Relying on hardware throttling and
 thermal pressure, the CPU cooling devices are dropped.
 The power for the second WiFi channel is properly described for the
 Lenovo Yoga C630, to ensure they are both powered.
 
 reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.
 
 Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
 support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
 SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
 introduced.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFmFhUbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FJe8P/080MWq7pknxqFT46bSN
 FbrK7Hd/TVly3Lx+aWmhyyAIl2qcsD0oEs8bB61j9bCTD4RWfRNSLNMv4/QNWeni
 LqXaJZJzoCxMq+F9h1NAZcDoZrUb3/yz5EZDh/3kRU4bJ+TNQSmRxRA30Elv7FEr
 TQuqWdSYe1laWS/j687lQ099TaHo7k06pR0JSiRK5QSeGYp/L65xc1ys/D7SthZA
 cK21++sKo26W3r1rmIuSPUWONF+LYiT04dTk8vO+X7RfzW8C7onuqN/cWhe+nb+h
 JMxnvup7h542Wh/6TpgNAGa2ikxXEZHP1NA6WVhcp6CdGRjE+2CYHCzX11IJA09Y
 26GsLu6Vtd7BN/kxdxs99h45PuZlt1WurnTUCUHqlCXqZx9mSRtSZpnJAMdGCiOS
 qmWkAukFTqde48TzvhjdW9OejVPzUGsWthtFYoImM3Sywg7nlRPw6HAZQNAlcVU4
 RwwLV4lDEMxofliXb15hjxpA4hzhyPebQ6JQmrl/e29RKj/TPwpx/C5N1XacJjX4
 2QYq25dzEUaZNK2XiO5BL99jl9zGUdDRDGpPzey2/XaVBF0cgcDNf65jqtBrk/Yp
 +WPcv2Q+EGcgCYJE2JalFyk6YhkLV/Qj7Fo04BKP9OF6p+EKyMq66hM9WXIkjvuK
 QCt16FsrcTip5Whzcuqbt/lT
 =nWS9
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvLHYACgkQmmx57+YA
 GNnnWQ//XBbJhCfn2m3OG5+vhtuMf3+PqkBph4/UUpHhMn7nM/UDfVvnkFo8NPYS
 wy3QaUsJ1jncdHiVxypjF4w6+c5sAi4jU3Mz48vJwyDt0UA6zg7Odb9h4vzt6PCI
 v7eqdSPe5JHrrxmIcTsyhqV5s/3ozWvnq3gy5kabtdYffMz/IsccNF9LhXaOAiHh
 weCHPR2IGNpiaKSRx92Se+zHLw0Whzmx27k8+t6kg4MkiiZQQxbu2vNx1KVYEhMY
 sOkHdiEqjd8hRCMXXn7KOTnkJYQwCjLWeMcBSo9LDGy0dmxIol/2v378b5vWiYRh
 43zBqL9w7nu+lZkW+Qur8319Squ+WsKz0sDCvMZ2k5IZLnKWGeMuUpU40Bdsf8iD
 yQ/YyCcBehgWJ0X0uXDuL5az31YNUHuzA0qvc9TNhaRBEG7R95ZbSs7QIDnGGeW2
 5FdA4UhpT4p1SvhJ+a2ev3GJtgmuw3+kPwXGY+CIEFbNLSY+mpLaH5sxjrSUxyJg
 wyEPQSuFwFD4FzlXUZ8Ccpn2eVnjJe9zxWv+5Wm2ne0ORM1Zcm6L0wvxAroSl1H3
 WB5ACCoPSQhdpQ7G/Sie5dbzYO9owZ6o3BSgGXGubT/QJuCvFvqtMehKjv/ZjTk9
 vY6Y9U6ULHK514Dku/TMWJuZv0tLhNMXyfEPCu7JPk9797fAWAE=
 =fbG2
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 dts updates for v5.16

MSM8916 gained some DT cleanup fixes. The Dragonboard 410c gains updated
firmware paths to the device specific firmware for modem and WiFi, to
allow these to be pushed to linux-next. The Longcheer L8150 gains extcon
support and the interrupt configuration for the accelerometer and
magnetometer are corrected.

MSM8998 gained descriptions for the multimedia clock controller and
iommu, as well as the GPU and its dedicated IOMMU. The QFPROM node is
updated to access the CRC corrected value space, the white LED (for
backlight) found in PMI8998 is described and GCC gains references to the
missing XO and sleep_clk reference clocks.
On top of this initial support for the Fxtec Pro1 QX1000 is added and
then the Sony Xperia XZ1, Xperia XZ1 Compact and the Xperia XZ Premium,
with USB, touchscreen, SDHCI, Bluetooth and vibrator supported.

The Xiaomi Mi 5 and Xiaomi Mi Note 2, based on the MSM8996 platform was
added, with support for frame buffer, GPU, audio, video encoder/decoder
and touchscreen.

The USB controller and PHY found in IPA6018 is described to provide USB
support. IPQ8074 gains a description of the SPMI controller.

The highlight on SC7180 is the introduction of the just released
"Homestar" device.  CPU power coefficients are corrected based on
measurements, IMEM is described to ensure that remoteproc relocation
information is carried to post mortem debug tools and a few smaller
fixes are introduced.

The SC7280 gains QSPI, low speed (i2c/spi/uart), GPU, thermal zones,
modem, CPU topology and updated memory map.

On SDM845 the "Limits hardware" is described and increases the
throttling temperature of the hardware from ~70C to 95C, with up to 30%
improvement in benchmarks as result.  Relying on hardware throttling and
thermal pressure, the CPU cooling devices are dropped.
The power for the second WiFi channel is properly described for the
Lenovo Yoga C630, to ensure they are both powered.

reboot-modes are defined for the PM660 PMIC, found in SDM630 and SDM660.

Initial support for the Snapdragon 690 (aka SM6350) is introduced, with
support for clocks, regulators, pinctrl, storage, thermal sensors, USB,
SMMU and CPUfreq. On top of this support for the Sony Xperia 10 III is
introduced.

* tag 'qcom-arm64-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (99 commits)
  arm64: dts: qcom: sdm630-nile: Correct regulator label name
  arm64: dts: qcom: sm6125: Improve indentation of multiline properties
  arm64: dts: qcom: msm8916-longcheer-l8150: Use &pm8916_usbin extcon
  arm64: dts: qcom: pm8916: Add pm8941-misc extcon for USB detection
  arm64: dts: qcom: pm8916: Remove wrong reg-names for rtc@6000
  arm64: dts: qcom: sc7280: Update Q6V5 MSS node
  arm64: dts: qcom: sc7280: Add Q6V5 MSS node
  arm64: dts: qcom: sc7280: Add nodes to boot modem
  arm64: dts: qcom: sc7280: Add/Delete/Update reserved memory nodes
  arm64: dts: qcom: sc7280: Update reserved memory map
  arm64: dts: qcom: msm8998-fxtec-pro1: Add tlmm keyboard keys
  arm64: dts: qcom: msm8998-fxtec-pro1: Add Goodix GT9286 touchscreen
  arm64: dts: qcom: msm8998-fxtec-pro1: Add physical keyboard leds
  arm64: dts: qcom: Add support for MSM8998 F(x)tec Pro1 QX1000
  arm64: dts: qcom: msm8916: Fix Secondary MI2S bit clock
  arm64: dts: qcom: msm8916-longcheer-l8150: Add missing sensor interrupts
  arm64: dts: qcom: sc7180: Add IMEM and pil info regions
  arm64: dts: qcom: pm6150l: Add missing include
  arm64: dts: qcom: sm6350: Add device tree for Sony Xperia 10 III
  arm64: dts: qcom: sm6350: Add apps_smmu and assign iommus prop to USB1
  ...

Link: https://lore.kernel.org/r/20211012231155.1036519-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 22:37:10 +02:00
Arnd Bergmann
878e26d360 Qualcomm DTS updates for v5.16 
This extends the previous limited description of MSM8226 with SDHC,
 UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
 initial support for the LG G Watch R smartwatch is introduced.
 
 APQ8064 gets a couple of DT updates, one which will allow the GPU driver
 to drop supporting legacy "opp tables" in the future.
 
 DT bindings and DTS files are updated with additional compatibles, for
 completeness.
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmFlyMwbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F6v0P/17moA0ag9bouNejiVbz
 qEYqDobqi6YvdEv8bDMcbHZKe7WpWy3eW304pp8gKj/u7E05rNdNAi45bZZ697Zt
 BhisknGupCw0+WjKVViAG7jSi7wVuBHyxJ5Y9e/iwItpmLaApQkW7/1lMIegOlsY
 BboFsHgRnflFO6fBg5LRhRPwFxZG0x1GRjtTYH4LiG8bOUa6TJy+/V+Wj8UTOspL
 ntmfFd295S4tm92XEYWhvIqKCrYLrn4/HQ5P9nB0kRFpPS7VX5C96a3t+vY9wSin
 IZwX+p4BsdnIG2ZucGKbEH+9PnWqrH1hmFJVLu99s/PulOd2GGEtWZeW3JongLp6
 R42JTx+nmFD4yCzL34qSVUEschcNaprSwqZLesJcFcXR1ZJ86Eo5S/8DMbmpscXT
 uIDkhTNTsoOVSpjZ5ZKfok2J9lpKl+FmpST25FuNapUmuAkgvJapipRk6DkXyT0r
 jAmTrSBRFAFcWY9isikKPPp97MuXguX+rHv+8Ki+K1ePfU+/8CftFIwlg8z6TfvY
 tUugn5K3xXrRBgR/WWH+6VJF9mq/XTCeaAlvmJzDlnTE/z2qGCrgQLKeH9vWTwT3
 uBG9dP+YhDvhXXWLU00W8xhSN/yb+riU2jj3FElhREmHL5B0/cKM2Hf1X5ugGImV
 2XKdAwuXcqJT9NpGgxuyL/KD
 =x0TI
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvLEIACgkQmmx57+YA
 GNl7tQ/5AVaJo5EQ+EUSq/410r2S+8EdSK/NIxhQ3DQNkvmqfsNQwg+AawrX9MDD
 GwGvWo0vcOKJxV0XR3R9tHEJn/AKTT+s4qop/khRE3SNWP6+T6fPpcB5wjzS0Y15
 Tz/Nz0L6AGL4k0woDJQYLau7yFMIbGi+HdWzKTfztR1fOKBUPc8EQ5jxQKW0I78C
 Rc+o0+GvZxGejLq/400axhFR8+vHKtU+aUc6mdpmfl3mBLXBAUH8kD8tBdySgGsv
 Li408VgADL036X6vXLG1ScNcREsGB+nw/lzb9JQfXXYkv/aNN37f/YXZUNWgdaQF
 8jJRIMmVsB6nfUmoKCcJVb50/YCzAJYJqS7P+Z0v586DgxPUqaxD5pqPdze2/kz0
 Qhfu4959yBUd0YdaFgMm2UanqbyMYI0gux5EsCxTNsPhd8qRThSLiCr7zoqTK2pE
 ksbdUUiNftcHpVnXMyeepK9XENfvnD1ROcdC209Mh0c+EGTE+3b7gqUV75NRYYW6
 Ek0N0w2h6tOGci/Q+rwk09JunqefjLViNjRcz/QSMV4feuw7ck/+1Hm8u+ydFqOa
 u5DgvLVaXLIslrMz7bCO7eGpY5KHomsKbPx7c4UmTTH/nN/DQMOLsaf4RmDa1ROW
 7Rjiwc9rCV+uZ9ET3ZNmGOyIkgguTksRFSidEXTdeqYKIhuFXms=
 =ur86
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm DTS updates for v5.16

This extends the previous limited description of MSM8226 with SDHC,
UART, I2C, SCM, SMEM, RPM and basic PMIC definitions. Based on this,
initial support for the LG G Watch R smartwatch is introduced.

APQ8064 gets a couple of DT updates, one which will allow the GPU driver
to drop supporting legacy "opp tables" in the future.

DT bindings and DTS files are updated with additional compatibles, for
completeness.

* tag 'qcom-dts-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  dt-bindings: arm: qcom, add missing devices
  ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHY
  ARM: dts: qcom: fill secondary compatible for multiple boards
  ARM: dts: qcom: apq8064: adjust memory node according to specs
  ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2
  ARM: dts: qcom: Add support for LG G Watch R
  dt-bindings: arm: qcom: Document APQ8026 SoC binding
  ARM: dts: qcom: Add pm8226 PMIC
  ARM: dts: qcom: msm8226: Add more SoC bits
  dt-bindings: arm: qcom: Document SDX65 platform and boards

Link: https://lore.kernel.org/r/20211012174310.1017857-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 22:36:18 +02:00
Arnd Bergmann
ba232d398a - mt8173: add reset for dsi0 to mmsys 
- move dt-bindings reset controller includes to correct folder
 - split PCIe node to use new format for mt2712 and mt7622
 - mt8183: add audio node to chromebook devices
 - mt8192: add clock controller node
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmFj7sMXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH4fRw//bYNU+512ppC+TvlN12anu/8Z
 toognw+j1l1C6DzJThsPymlqfa/l1oYdv9WWvwXJYD8hBnovB4z3f9OJpU8KfYl1
 IRNDNlE4JP710lJ4mmLZESrtaOeemG+RguecPUTNROLwKTc7k/ueeH7Vrm/yNx0L
 SIFMHs02EM4YL54LzQsX4ZgUWwt969mLIArOSCe9oTSF1UZwBHNwQKvN3Pwr3lOz
 X48T+4MpaNqkh5w4XCzcY679da+JC52Oee2iSXaepQutsWCKeODWcBoE2Biz9YiV
 DqejYiPNTtziqyZL6PokNT9VtCjG393A/DGQwC/ekTBV3M172QGLQKSJUwcOdVkd
 KQAVoljRxk4eBOgD2Lk0G68UkeNudjBCnzh/1piHRTHJrYGNlVjuZx0JnXKLNfiW
 S/+LtPpl5OIhOm2eOTzdCNL0BRyNYCXCf9G/z0ctSXR/eQWygVoERV0ICaB4DSmO
 C9VQv2g/4JjfU7iQzXcRRHX7oL8rtsZERLjnotFyFjnP4uWB44qkrKPmNYBRfpo5
 hBmrDTeeSt4bhk5qYR9kqcMvGSa0q9ERH2ibTg0vBCXkkHs/yMYExPRmlydg6o47
 fZTvzv8Vy3ig4yI4dbyTxpGD8R+1yUazkU/cKYByVjKiGakjOc+Y3wsEbQG9d0W2
 dtPc26F5Fnj88HoWy7s=
 =9lk3
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFvLAgACgkQmmx57+YA
 GNmQQxAAv3UZ+FO3xeBtDgdy/WGbmqHIKrlNN9SGoGR0N7zafjv67pzVBr3ZrKoH
 vlFkkxjGrioMFvzgCTyg0v4mPznhSM1/FTGBM/Rs+V2DT0BCeCE82ZgTMJt9pGcH
 lNINC519MCXgzUaeyI3legu+81VcgoI+bH3Lt87Jop2kfCFiob09YbxuvoLFJKeW
 ZfFEiLtNCovDV9o/kKALLuK2LIYfaiwcYWwawD4tnJQ641CRIEGhITtV9oty5X3G
 kwVUx9iWB5Utm1Z80R8E0gSnKuP33eOHp1wwWsT/KdX3lWeMxg0yStoFu+YQ4v2+
 vXry2FgpoHu2Y3hSROcHUxk9kUXM0xRYhibuo1LumoQx+IzO4eLAFzaU95yUZVt2
 mAM5cmTH6acpQ9YKXzQOAzDdXNNX/45lhh5Z/Add8rh2JkGTLcOAYmf3GEbldTQN
 si711Q2DETSDO7Ufm3H22DIJT34J+GcSX+dx1FpZYtJmzh0FkqaIAs+kSp2KpCCl
 tYcqdFp0hQOlZRuBalZJXBhSeDC3XbKjUY7P56UMhvh45XqvdeGUY0lsPk0Breji
 oxGeuLwmYDD9F75vOrKVJcsvL/DUztpK0kvn0Wm8mle/ks6LUIIvRbkbmCSUWImb
 sKN/QEZOQ9m9DOyLVbqOjokiAFJxN2UEiq1EhFS5pfcAeVWoJvw=
 =nSdE
 -----END PGP SIGNATURE-----

Merge tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

Biggest change is, that we have now support for a reset controller inside the
mmsys. This goes inhand with changes to the driver, that you will find in the
soc pull request.

Mediatek PCI device tree binding described the root port in a wrong. The IP
actaully implements several root complex with everyone having a single root port.

We need to fix the DT in an incompatible way to describe the HW as it is. This
also fixes a problem that no IRQ bigger then 32 could be handled.

The only public available HW that is affected by this is the BananaPi R64. I'm
not aware that there is a big user base using the upstream kernel. In this
boards PCI is only used for extension cards, so I don't expect any boot problems.

- mt8173: add reset for dsi0 to mmsys
- move dt-bindings reset controller includes to correct folder
- split PCIe node to use new format for mt2712 and mt7622
- mt8183: add audio node to chromebook devices
- mt8192: add clock controller node

* tag 'v5.15-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0
  arm64: dts: mt8173: Add the mmsys reset bit to reset the dsi0
  dt-bindings: display: mediatek: add dsi reset optional property
  dt-bindings: mediatek: Add #reset-cells to mmsys system controller
  arm64: dts: mediatek: Move reset controller constants into common location
  arm64: dts: mediatek: Split PCIe node for MT2712 and MT7622
  arm64: dts: mt8183: add kukui platform audio node
  arm64: dts: mt8183: add audio node
  arm64: dts: mediatek: Add mt8192 clock controllers

Link: https://lore.kernel.org/r/1a3d63a3-c020-3319-26f6-a2ec338cc42e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-19 22:34:28 +02:00
Amelie Delaunay
db7be2cb87 ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151 
Referring to the note under USBH reset and clocks chapter of RM0436,
"In order to access USBH_OHCI registers it is necessary to activate the USB
clocks by enabling the PLL controlled by USBPHYC" (ck_usbo_48m).

The point is, when USBPHYC PLL is not enabled, OHCI register access
freezes the resume from STANDBY. It is the case when dual USBH is enabled,
instead of OTG + single USBH.
When OTG is probed, as ck_usbo_48m is USBO clock parent, then USBPHYC PLL
is enabled and OHCI register access is OK.

This patch adds ck_usbo_48m (provided by USBPHYC PLL) as clock of USBH
OHCI, thus USBPHYC PLL will be enabled and OHCI register access will be OK.

Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Olivier Moysan
1a9a9d226f ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 
Fix SAI2A and SAI2B pin muxings for AV96 board on STM32MP15.
Change sai2a-4 & sai2a-5 to sai2a-2 & sai2a-2.
Change sai2a-4 & sai2a-sleep-5 to sai2b-2 & sai2b-sleep-2

Fixes: dcf185ca81 ("ARM: dts: stm32: Add alternate pinmux for SAI2 pins on stm32mp15")

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Olivier Moysan
6f87a74d31 ARM: dts: stm32: fix SAI sub nodes register range 
The STM32 SAI subblocks registers offsets are in the range
0x0004 (SAIx_CR1) to 0x0020 (SAIx_DR).
The corresponding range length is 0x20 instead of 0x1c.
Change reg property accordingly.

Fixes: 5afd65c3a0 ("ARM: dts: stm32: add sai support on stm32mp157c")

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Fabrice Gasnier
3d4fb3d4c4 ARM: dts: stm32: fix STUSB1600 Type-C irq level on stm32mp15xx-dkx 
STUSB1600 IRQ (Alert pin) is active low (open drain). Interrupts may get
lost currently, so fix the IRQ type.

Fixes: 83686162c0 ("ARM: dts: stm32: add STUSB1600 Type-C using I2C4 on stm32mp15xx-dkx")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Grzegorz Szymaszek
5ac05598aa ARM: dts: stm32: set the DCMI pins on stm32mp157c-odyssey 
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output. The
DCMI pins used on this output are defined in the pin state definition
&pinctrl/dcmi-1, AKA &dcmi_pins_b (added in mainline commit
02814a4152). Set these pins as the default
pinctrl of the DCMI peripheral in the board device tree.

The pins are not used for any other purpose, so it seems safe to assume
most users will not need to override (delete) what this patch provides.
status defaults to "disabled", so the peripheral will not be
unnecessarily started. And the users who actually intend to make use of
a camera on the DVP port will have this little part of the configuration
ready.

Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Marek Vasut
2012579b31 ARM: dts: stm32: Reduce DHCOR SPI NOR frequency to 50 MHz 
The SPI NOR is a bit further away from the SoC on DHCOR than on DHCOM,
which causes additional signal delay. At 108 MHz, this delay triggers
a sporadic issue where the first bit of RX data is not received by the
QSPI controller.

There are two options of addressing this problem, either by using the
DLYB block to compensate the extra delay, or by reducing the QSPI bus
clock frequency. The former requires calibration and that is overly
complex, so opt for the second option.

Fixes: 76045bc457 ("ARM: dts: stm32: Add QSPI NOR on AV96")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
 2021-10-15 16:51:09 +02:00
Alexandre Torgue
7e9e2d18c0 ARM: dts: stm32: add initial support of stm32mp135f-dk board 
Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
    4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...

Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-15 16:51:09 +02:00
Alexandre Torgue
396e4168c5 dt-bindings: stm32: document stm32mp135f-dk board 
Add new entry for stm32mp135f-dk board.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
 2021-10-15 16:51:09 +02:00
Alexandre Torgue
1da8779c00 ARM: dts: stm32: add STM32MP13 SoCs support 
Add initial support of STM32MP13 family. The STM32MP13 SoC diversity is
composed by:
-STM32MP131:
  -core: 1*CA7, 17*TIMERS, 5*LPTIMERS, DMA/MDMA/DMAMUX
  -storage: 3*SDMCC, 1*QSPI, FMC
  -com: USB (OHCI/EHCI, OTG), 5*I2C, 5*SPI/I2S, 8*U(S)ART
  -audio: 2*SAI
  -network: 1*ETH(GMAC)
-STM32MP133: STM32MP131 + 2*CAN, ETH2(GMAC), ADC1
-STM32MP135: STM32MP133 + DCMIPP, LTDC

A second diversity layer exists for security features:
-STM32MP13xY, "Y" gives information:
 -Y = A/D means no cryp IP and no secure boot.
 -Y = C/F means cryp IP + secure boot.

This commit adds basic peripheral.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-15 16:51:09 +02:00
Niklas Söderlund
6be85db401 mailmap: Fix text encoding for Niklas Söderlund 
There are commits that mess up the encoding of 'ö' in Söderlund, add a
correct entry to .mailmap.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211014212906.2331293-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-15 09:50:12 +02:00
Linus Walleij
be3a60a943 ARM: dts: ux500: Switch battery nodes to standard 
This force-converts the per-device battery node into the standard
properties using "simple-battery" for the HREF machines and the
corresponding Samsung battery for the mobile phones.

This is fine to do since the battery data in the DTS files has never
been deployed or used. In commit a1149ae975
"ARM: ux500: Disable Power Supply and Battery Management by default"
it was turned off and has not been switched back on since. In
the meantime standardized bindings for batteries have appeared
making the old AB8500 battery bindings obsolete.

The battery node which is now in the middle of an included file
is obviously a per-device piece of information so push this down
to each board. The HREF machines all have the same battery and can
share a single node in the HREF dtsi file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 2021-10-14 17:41:10 +02:00
Geert Uytterhoeven
12ee311887 arm64: dts: renesas: rcar-gen3e: Add Cortex-A57 2 GHz opps 
Add operating points for running the Cortex-A57 CPU cores on R-Car
H3e-2G, M3e-2G, and M3Ne-2G at 2 GHz.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/08a0f27f50b8ad4a78c05186190bebcfb364fe8f.1634200489.git.geert+renesas@glider.be
 2021-10-14 10:46:46 +02:00
Biju Das
361b0dcbd7 arm64: dts: renesas: rzg2l-smarc-som: Enable Ethernet 
Enable Ethernet{0,1} interfaces on RZ/G2L SMARC EVK.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211013075647.32231-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-14 10:46:46 +02:00
Biju Das
38ad23e15a arm64: dts: renesas: r9a07g044: Add GbEthernet nodes 
Add Gigabit Ethernet{0,1} nodes to SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211013075647.32231-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-14 10:46:46 +02:00
Niklas Söderlund
c534e655d5 arm64: dts: renesas: Add ports node to all adv7482 nodes 
The different port@ entries of the adv7482 nodes shall be encapsulated
in a ports node, add one.  This change does not change how the driver
parses the DT and no driver change is needed.

The change however makes it possible to validate the source files with a
correct json-schema.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211012183431.718691-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-14 10:46:46 +02:00
Niklas Söderlund
5fea5b5571 arm64: dts: renesas: r8a779a0: Add and connect all CSI-2, ISP and VIN nodes 
The V3U have 32 VIN, 4 CSI-2 and 4 ISP nodes that interact with each
other for video capture. Add all nodes and record how they are
interconnected.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211012100038.375289-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-14 10:46:46 +02:00
John Wang
4eb7fe3333 ARM: dts: aspeed: fp5280g2: Use the 64M layout 
Use the 64M layout since the flash on the board is 64M

Signed-off-by: John Wang <wangzhiqiang02@inspur.com>
Link: https://lore.kernel.org/r/20211014072743.939293-1-wangzhiqiang02@inspur.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2021-10-14 18:25:17 +10:30
Arnd Bergmann
96c7f32d17 Devicetree changes for TI K3 platforms for v5.16 merge window: 
* New Platforms:
   - AM654: Siemens IOT2050 PG2 boards
   - J721E: Low cost SK board
 * New features:
   - mmc aliases introduced
   - AM64 ICSSG nodes, mcu pinctrl added
 * Fixes:
   - Schema fixups for pcie, thermal zones
   - Fixup to include board specific property for J721e-evm and j7200-evm
   - Misc fixups including cleaning up order in Makefile
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE+KKGk1TrgjIXoxo03bWEnRc2JJ0FAmFldHYACgkQ3bWEnRc2
 JJ1Ecw//Qwdmws9fgghodAov7lHNl+vKk8rM8jIavZbVvHMdk/s7kD8vjRse8LtT
 9bhmf59XF/JfQwah01GKz2J4bCSgMw0WEzk5fcWJU/wzocoEdw3t0DeLS1UJFvaX
 0z3bKnO9PBfTMqjjLpWymFMRG4w1upuIp3EpvN8jRq+r8f6reEOuFGceZJt5dgT8
 KjoK8lk+dvVqn/UkB17gSPT8sZ6FPR+un7VVN9aqL0Fh/8F2xpNaYza8JLKtqdAg
 GPC0PL+fEfY7jtoPWvo0Pv0SdmSuBHeHLo+Tt9e8KD2ngb6We9MhU2W5BX0vSUvO
 SNhf5hxF0erXGv8/3h/hEFAApM/RjVPHltLZ5GarIbyQXJNNNzj5Ahy8TzxjTfVE
 /8rzCpWEf9FP1g/8B7l6U8bGrLEGpBOrXG2cZlKQDnhfJXPojVkLFh+dwXbkhyt7
 BuKUZ/xTimOKP+1AyJrSm4svwk41mI+gZZ2jl/dbOcpD9uWIAE1s8pCsMlfrTlwV
 DM0Cs4uH3dyR0iytUX0T8X3R0x6wUsouSY3IWVGYrvxqmptwPnCelyq1711sIKE0
 btqyVZHjxJYMiiRSb0RX1fVNQFW56LeIIXJU20boZe9HV4gu4DlczEjQvD6gRiyk
 QRBPv1EaJF/rHHTaKA+Ys1Fs0vuUrlMS3p27xXjp1hzpwBK3eDo=
 =6QM1
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFlhM0ACgkQmmx57+YA
 GNlPIw//azQ029ryXE/J9xsAGAUdMvvaZOjiLzKP7hB8CWx9txIgqbuUc3ywTm8k
 1D9QVEsXJUUHyOyENacffAjudIl5GLSA3hlzP1owirvJm7zcuTcOSQ/1GFnyBCXV
 T0iLG4CBV9G1sd9EerUO96XoXgO7S5ijx9v8fGrlagIMXebR6CXbdil1+yjJk8wM
 EgELxIGNCIDCiedbBurv/TMgFhIh7mr01ykaVlkQ1PLY9oLLI65p+iuAhVDPMoL0
 h8kg0MNf1QNc0iPaZG6UezWnZjfxeQ4+jtOya4j3pB4eRLeZjoFnsJT47KcqCCTL
 vMCTwMMiJwyWoFUN9ufjvY/7vu2atpFgC8AoNBrJAlK6CqxM/LTM7vGIED50Oahb
 +Pb8Le+t25ZQoFOq9EK8FnNQszcuyhI+pwp5khSShmarRy+97swfKuIoXOPm4gO0
 +C0UxWfULVFQN1FUJrX/SfE2/hYNuHXK1nsilzII7h9NLZio580mwA05Ge2UbjP7
 UJTxlff0fBLXjTddBPPf8OjN7L9QFgweblkWfahRV+qFItL9iwYtnsD1lxZnJgHE
 vRYDtaeWH12vp7QRIjUvtD1O2ZSqwD2tC/MHC1rlWq/tGf5+ghdzGnGOaELocvAu
 iO4bJ0KOgJkDKkhroFtcXXYO0XAVki5fQWlQF2G4371I4t/xDh8=
 =M+lK
 -----END PGP SIGNATURE-----

Merge tag 'ti-k3-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dt

Devicetree changes for TI K3 platforms for v5.16 merge window:

* New Platforms:
  - AM654: Siemens IOT2050 PG2 boards
  - J721E: Low cost SK board
* New features:
  - mmc aliases introduced
  - AM64 ICSSG nodes, mcu pinctrl added
* Fixes:
  - Schema fixups for pcie, thermal zones
  - Fixup to include board specific property for J721e-evm and j7200-evm
  - Misc fixups including cleaning up order in Makefile

* tag 'ti-k3-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (24 commits)
  arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes
  arm64: dts: ti: k3-j721e-sk: Add IPC sub-mailbox nodes
  arm64: dts: ti: Add support for J721E SK
  dt-bindings: arm: ti: Add compatible for J721E SK
  arm64: dts: ti: iot2050: Add support for product generation 2 boards
  arm64: dts: ti: iot2050: Prepare for adding 2nd-generation boards
  dt-bindings: arm: ti: Add bindings for Siemens IOT2050 PG2 boards
  arm64: dts: ti: iot2050: Add/enabled mailboxes and carve-outs for R5F cores
  arm64: dts: ti: iot2050: Disable SR2.0-only PRUs
  arm64: dts: ti: iot2050: Flip mmc device ordering on Advanced devices
  arm64: dts: ti: k3-j7200-common-proc-board: Add j7200-evm compatible
  arm64: dts: ti: k3-j721e-common-proc-board: Add j721e-evm compatible
  dt-bindings: arm: ti: Add missing compatibles for j721e/j7200 evms
  arm64: dts: ti: Makefile: Collate AM64 platforms together
  arm64: dts: ti: k3-am64-main: Add ICSSG nodes
  arm64: dts: ti: k3-am65: Relocate thermal-zones to SoC specific location
  arm64: dts: ti: ti-k3*: Introduce aliases for mmc nodes
  arm64: dts: ti: k3-am65-main: Cleanup "ranges" property in "pcie" DT node
  arm64: dts: ti: j7200-main: Add *max-virtual-functions* for pcie-ep DT node
  arm64: dts: ti: j7200-main: Fix "bus-range" upto 256 bus number for PCIe
  ...

Link: https://lore.kernel.org/r/20211012120817.beqhp4tygnf3xyi5@wireless
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-12 14:51:25 +02:00
Chanho Park
2b663ae715 arm64: dts: exynos: add minimal support for exynosautov9 sadk board 
SADK(Samsung Automotive Development Kit) is the development kit to
evaluate Exynos Auto v9 SoC. It has 16GB LPDDR4 DRAM and two
256GB Samsung UFS. This patch enables only serial console and ufs0
device.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211012002314.38965-4-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 2021-10-12 14:20:57 +02:00
Chanho Park
31bbac5263 arm64: dts: exynos: add initial support for exynosautov9 SoC 
Add minimal support for ExynosAuto v9 SoC[1].

- Enumarate all pinctrl nodes
- UART with exynos850 compatible
- UFS0 HCI + Phy

Like exynos850, this also uses fixed-rate clock nodes until clock driver
has been supported. The clock nodes are initialized on bootloader stage
thus we don't need to control them so far.

[1]: https://www.samsung.com/semiconductor/minisite/exynos/products/automotiveprocessor/exynos-auto-v9/

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211012002314.38965-3-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 2021-10-12 14:20:44 +02:00
Oskar Senft
4dd51eb7c8 ARM: dts: aspeed: Add TYAN S7106 BMC machine 
The TYAN S7106 is a server platform with an ASPEED AST2500 BMC.

Signed-off-by: Oskar Senft <osk@google.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210909004920.1634322-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2021-10-12 08:31:21 +10:30
Adriana Kobylak
18b34bcad2 ARM: dts: aspeed: rainier: Add power-config-full-load gpio 
Add the power-config-full-load described in:
https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#power-config-full-load

The power-config-full-load gpio is designed to be used to specify how
many power supplies the system should have, in rainier it is 2 or 4.  If
enough power supplies fail so that the system no longer has redundancy
(no longer n+1), the hardware will signal to the Onboard Chip Controller
that the system may be oversubscribed, and performance may need to be
reduced so the system can maintain it's powered on state.

Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20211005192226.213539-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
 2021-10-12 08:31:09 +10:30
Arnd Bergmann
86d3858e60 ARM: tegra: Device tree changes for v5.16-rc1 
This contains various cleanup patches to 32-bit ARM Tegra device trees
 and enables USB OTG mode on the Nexus 7.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmFgogYTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoQfQD/9gXKPXpHeLFbHOXCDnVllDodI0LMY2
 mQm9VEtdwAyFO9n86r2mtNMFVBkE2tgTPIPcuuKG7YwopJBOkrzZDl7+1XyemU1R
 MiUrJd6s8Rhqj+KF5ZBc88UKluxs+IGTtlXesRf//YPaKEaRq0gYLVaRo36Mu0Km
 mqwGRqUM3K5Z3mvB23FDPfqVDJhCYyeY2/aIrzaO5W/oiS0m2NSTbsW1/WOTGCVT
 NCfQVegvDDNsewX2q0dce1jRZd4tp+P3gVKSGW3yRfZcCSEiPvmYBL0xzLr8IYHN
 eY6FTjdNv03CQtEzi9z28JkTbWsAr65fixN/9DmGCRLkJH4FNEEYJa4iMRwO0NsV
 1lU+i4F8muzxF5ksCy3l1dhlov2GpCwXX+upTtE27wgDoCfYpFRxQ6yWPzyoy+U/
 /9dSfxgZPVYVB2ravR06PWrSsYsYqInbAW0PoIYtYG2lgpRc+1A1FjcnwGP1S14d
 /b23ZYbz/lEoVu7Z9tm/UuNYWHiilyrBI8K3vUKfx1n4bVim5Amk91B+XWer3OYb
 xC7/XKGtw1laXDXxsA4pd/6yVIr0wwVRIJw4ZCMhRx2yPQAiMW9xiCJjU4/BOMD+
 gCsTQlj1PYRu0PP4N2gHuCcXtX7XpN8+NL/zd6ZBaiEHKGQRtRVIjO4NPr9ALOmw
 sd1ppS+aqpPZuA==
 =kkWf
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFksu0ACgkQmmx57+YA
 GNk+YA//fuazS0wWLa5BoNl9DsnmMvCyUBOep1GgPs4blYzUVDPwo8+lB9UWeeXk
 IVYVB6/SSHQJHa9lykX+QM0EOA0G8CLfmDe598Aend/lztUXCqyA4N5c9XMlj6/x
 TLMrm4lMEGLPAend+eBLMcDTma2sbDAHTMwsi9xCiyb3JROxjyqWgpmBfqZro1Yk
 PUwAq3yamXEKjSCzf1VFp9llM7OeMvbdA0JlRd27lLjiNfJr/elN0xlaTuWiLPdo
 7EU5FXnDUQ1wfEmtgGh9zLnHeXudJVT2vZa0F5R3KKnTxA7Rwu4HERZKYPhFfGS+
 tA8TuKw427yLe2XwVTtvHmtsur6rwH0OxbtSM6zsHn9GHg4x0fjmgkp2CNgfuMWv
 aX/1AWyEi0/02D7X/c3W48+evbPnOjtP07U9GPSVa1yem4LH5uKkxdJ+K0k74MVP
 ASJMQVWDeu7uigBQtTavi+gRYV7tMp1Z+vsvrRmjxeaiXzMBjcKAvzzQ3C9Mjvk3
 0gneerSdFH0L5c8bZWMyqf4Uw/owSjOIo25ShsT9mGHZx/qe+7wZ+N4loPkvlPjK
 bvLjj9m1/etf45WynZ2JEIhk5kl9ZEUbX21jFTNFRjITCGcE4hznXHQI8hd1uPmW
 1akUTgx4q715A01tv9NZOhdUtEGavAsUUSnoxIrnCwaxPZwpuUM=
 =X0fi
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

ARM: tegra: Device tree changes for v5.16-rc1

This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.

* tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Remove useless usb-ehci compatible string
  ARM: tegra: Remove unused backlight-boot-off property
  ARM: tegra: nexus7: Enable USB OTG mode
  ARM: tegra: Add new properties to USB PHY device-tree nodes
  ARM: tegra: Update Broadcom Bluetooth device-tree nodes
  ARM: tegra: acer-a500: Correct compatible of ak8975 magnetometer

Link: https://lore.kernel.org/r/20211008201132.1678814-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 23:55:57 +02:00
Arnd Bergmann
2a9c7b9062
 		Revert "arm64: dts: Add support for Unisoc's UMS512" 
The patch uses the "dt-bindings/clock/sprd,ums512-clk.h header, which
is not merged yet. This caused a build regression, and it means the
patch was not ready to get merged anyway.

This reverts commit 23410de579.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 23:02:34 +02:00
Arnd Bergmann
8071974c83 AT91 DT #1 for 5.16: 
- Addition of a new variant in the sama5d2 family: the sama5d29 with
   significant updates being CAN and Ethernet controllers;
 - Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
   maintained up to this moment, separately, in OpenWrt tree;
 - Two more boards gained I2C bus recovery support;
 - Tse850 updated with one Ethernet fix;
 - Sama7g5ek gained ADC nodes  and sama5d27_wlsom1 WiFi support.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ5TRCVIBiyi/S+BG4fOrpwrNPNDAUCYWQuQwAKCRAfOrpwrNPN
 DP3CAQCOSNWmCOwvlWJdu7/FjsxPsPXmUyUHW0oAFF80sEkaBQEAiN6QlIDvTB9U
 Cxn/wYe2zbQ+vJbqkuODTqK104OUdA4=
 =Ph50
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkoI8ACgkQmmx57+YA
 GNk9QQ/9F0jWoBA1RQDZgIpBQFL/3tPbtuIpMT3nY7zGTecKEZAYjAPI104d30HK
 0yVHCGlV9fAW+eHqq6szyNQhzncvz/aeUrYuyb9gffPOSvdVa3CwRxOFNu86vEWS
 cTn/DzqfJ1PunP7nMppD7smWEhWyqpc7TmApkXCPyiWOLhJvCYTVf7xdqGiKvMDo
 ou9eNTyeMa0Abn38rnXu3mqmHbPC4wV6EeeOsSwZhrguf3sLuFk4dGWmdYzbC4Jo
 ZxTkFEFxQWZyj26lP3E91Ok+F0+BOycTfRno8WSiLUL2cQhOh/MuU9wvQatWPpZM
 RW8XIx8GlFgc5ffYUSVXxSlcrjyL+6w2PxCXaak6+7lC/tTRe/vXXRSi71yb2Yxw
 p+zZCI9Agves5pqTnh8TFlMzidO57xLJLDTsYUzsHJgDwJ+mv/hIdg4j84VsMSnj
 T5tU0FqX9ut8xGZduICFg3UtTOn41XiJH9L87hymaheMlVUJQb3X0eV9lUg8pOv2
 Bb7i/68uA+Aa0UxLRtnwfZkskXJ5Rcx0hhmcfZPKOjr3K/TLO2ZUtSQY/dcOqh4i
 ogzvJTggxgYKi88OXECHjO/WV/i8JYivQzwtMkIjR9YuSEBmlNzdzX7VYk/MZOWj
 xJe70iIei7pPVtqIp0D3H/0xzC5XD9SxphDsYUbCh2iFumLSFcI=
 =FHko
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT #1 for 5.16:

- Addition of a new variant in the sama5d2 family: the sama5d29 with
  significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
  maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes  and sama5d27_wlsom1 WiFi support.

* tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
  ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
  ARM: dts: at91: tse850: the emac<->phy interface is rmii
  ARM: dts: at91: add Exegin Q5xR5 board
  dt-bindings: ARM: at91: document exegin q5xr5 board
  dt-bindings: add vendor prefix for exegin
  ARM: dts: at91: add CalAmp LMU5000 board
  dt-bindings: ARM: at91: document CalAmp LMU5000 board
  dt-bindings: add vendor prefix for calamp
  ARM: dts: at91: at91sam9260: add pinctrl label
  ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support
  ARM: dts: at91: sama7g5ek: enable ADC on the board
  ARM: dts: at91: sama7g5: add node for the ADC
  ARM: dts: at91: sama5d27_wlsom1: add wifi device

Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 22:37:35 +02:00
Arnd Bergmann
c3bb12ba7f Devicetree changes for omaps for v5.16 
These changes configure devices for am335x and dra7, and fixes
 various devicetree check warnings for gta04:
 
 - Update am335x-pocketbeagle to use pinconf-single
 
 - A series of devicetree warning fixes for omap3 and gta04
 
 - Configure bb2d Vivante GC 2D Accelerator for dra7
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmFkD1cRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNeEhAAkYnwyh0neqA2EdvZXRAOdBes8muAR3eI
 e1fyWop5m+RLUDoz5/9f/5TrBFSSTI6T5Y0Of12zP88pyDB6iycGAX0b3+8hvd+J
 tmnlN663Y0JzgAwzhls1Bq+iFqj31lAmlKrpY6/9cvXvU62VE4oR/E8Ug9sbMgAO
 FGRDTpaDudcD47EtouOhnHZ06UxdsA87EwdpfN+FhXS6/4MtW7j8G+hwvew/7D6G
 OnztZHCoB7dlWBbSt0EgluNkWmupeQrM9Pt2R4QYYWyiiVX8SunDem3aiJcA+qtc
 tisjTzKjFpPulGwjVpOAa+E0/+qIruxwit3dnJHisUB1lXADBO9cPb7zLquQPWo5
 X8xG9da9V7ieufIL3scRzsGKGbXWbjnRHQyD+wasBa8fra0jHDej2wKGl19jiEmG
 YONs4UkG4jsgY4smAQSeCtyZvAZ8EjBnwYMeg7/yxKBF/2OIxJUcznnysSxTnCIA
 ywQMs4bJ91Lg1aOkgimmSEtOb887nART4cfNX/D7iEiLt3E9sOgMHxGlR/K9zMrP
 LxWsL2angfPeMoDANUDpzoSuQyJxJ60+VpzC5w8JSwt7JsL6cAvl+vZhKA291mti
 LX1cwRrzgApjTvaXnO/Apc2NKR8l7i0zr93DlW7MStymH8xIAK+1ORyAgJDk/ij2
 NhDd8tKjXeM=
 =+srs
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkngIACgkQmmx57+YA
 GNkaExAAr1nlSZzJ4hr9sDRO2/0E8By9suvdqN2yNRL9dRY3ECkVVtQAcKwzCH/j
 6mhwk8pZNSsOTupTn3wfwn9bVuP9uml20rBclveLtH6qTEvXk/OjRx1NOMO6Hvs9
 SrnoUVHl7gsPTFDch1J8dS3BfmMHLcAtvhQICfZ3+tm0pr2kB2ewwWxtdHlH4YMR
 3dM5A0R6uGg8iiUNcYy2XtlHjoZkkT50FnSFsagu9HhfmLLmJNxhxJP/VptL21+R
 ayK6lBFWghDy+yDfrx6BZXOgdd2SdjNOiMXM6jfPdAesJRbLBeOvoCGdUJ+HMqx9
 DOMAgckO2qHjlyAam0UIWGOOoPJKJBkwPLq5SoFzuK1Si8EpMbe5AU81tIa48dmP
 nKXdE4VDjKu4EZLPxvsiytueofdpuh5OGfQCxS0p0XhwmcScEWjj7J5v5TXv1zRV
 77YBCvcZzkUfaaYocM15DQQAA6aB8ZRi6e49e1zRP9mhLc45SgBycjYZVfMn8e34
 bqeryu3DN2sMU25lzYGiQ1X6w0hFyFqEtkOQsNP8angOua0JjRp/HMWdFk3JG0nQ
 5OA/6jV1cb4AMwlgML0vLpIiJ/Dnzf/pbj3bx0sOIpwzA0K+auphCUgwE1JJzcQN
 ynj1918gh11XkQJguDSKoTBNqIQYF8GSxa0NNVnZYUJmyLZjNtQ=
 =jeLE
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.16/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.16

These changes configure devices for am335x and dra7, and fixes
various devicetree check warnings for gta04:

- Update am335x-pocketbeagle to use pinconf-single

- A series of devicetree warning fixes for omap3 and gta04

- Configure bb2d Vivante GC 2D Accelerator for dra7

* tag 'omap-for-v5.16/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra7: add entry for bb2d module
  arm: dts: omap3-gta04: cleanup led node names
  arm: dts: omap3-gta04a4: accelerometer irq fix
  arm: dts: omap3-gta04a5: fix missing sensor supply
  arm: dts: omap3-gta04: fix missing sensor supply
  arm: dts: omap3-gta04: cleanup LCD definition
  ARM: dts: omap3: fix cpu thermal label name
  ARM: dts: am335x-pocketbeagle: switch to pinconf-single

Link: https://lore.kernel.org/r/pull-1633950030-501948@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 22:26:42 +02:00
Arnd Bergmann
79619b7988 mt7623: add USB nodes 
mt7629: update PCIe node to new format
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmFj7fIXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH4Igw/5AeNR03cfLy0uu0s83T/Vod0f
 u9ks8p+f9Xqw2dpe8BufeJs4qpPK0PiOmYNyHhjU/0klHm6DvgFFbNMvvENp/uSo
 Kv2uCfBgmqzCSIkLIe8KU1BbCgMudIXds4qHWSUcf92oihJsPED7OQc8YQxKLBC1
 x1LtLPBJWx/4myq3tDIt3Sa0cPk45t0ooR6yUROMFQ6fFJthwQ+4Kwtx2dVLoXbS
 92ubhPm4vzTx0TN54i5zejHixZ1DQ2y9qIDylAa/6QxKZb96PrsLnjMxn/ONxQLf
 NAIbayesCPDHCda0qz0fDeWN7h1imnuQ6WhhWoJLTW2Nkuv+FmoehqnCfifZC2nr
 9loS+AuKT5/jW1yXje6ICrrbxR6anxmBrD6cJIkvxQhmX8iHQsS3wQhZvh1R1/pV
 ULm4DYZt6dzIK2JrdQ0lSqOqJ4RmxqrHFnHxTVeXYRhP5AEFHXDyUsKexTt9dhbD
 t60UuUJgJ/J7MUIeAXzRhQPVhGWNEiCsGUftfAvMnSje7CWh2zdNsTuD/yBUlQXh
 6cSzckl6bgwItp2aCtVOefmkuAHMz/OCXiKeP94m3zyiebFhBbhVGZJwOpV3ISJ6
 nBaZUyFLZ7VOgh2PVgo4iTRod4Ytu6zl0WFzoBxQJevbQwVjvZVh320i2J2y7bMX
 /Ebgl5z1GJ/32SyrsE4=
 =ZupU
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkmxcACgkQmmx57+YA
 GNkPGxAAuH9TL/LANjLtbPDETLOG6cEkXOGX1jkGS0bb2qUasn6+b1qYFm/BHm9F
 VjXIbrfcqDahlVyDUcegmP1VC/pZv2+tSp+JuLhrEqjK7g1ToGGRIg5xUx6toaeC
 fYbysYhWNj0K0Q1jh974eExdVCQknjvKyoQST9mKMK6ORPTwM38DTj/8UQCXifmJ
 +eeQunrAD6ELO1/Mu3CsJ5/YxssM2IxGmohn00jn3hB6KUedH+KCB9GqNoSedZrh
 z17lNo+NMzfleDtx2N5qwkqOkHvNMBf8ugRlNGgED+R+sMM5Rjp3F1bFS1IQC3XU
 zhFQoZWXBmVCVyYIG2YoV/Wb0gMICUXMfOKgr7VuyyE9MpAyVMLVzvQkSXKbiOhX
 KxV89iNXLyZHlrU6Y3yaCLl8ivQ7wpJ4f00ytMNW6UROLViJc3u/nLu1sMEOCFg9
 6o8ers1/B3lgk2NCpm8ERssf8e2X2NZ1GA7HZ/PUAw+BVUzxOiVFSa1zPzwG5PaJ
 EKqeGjILKTIPbc3CE3YwiBKAGoO/MdN+0uMYQf0wynVH2iiSVHPL/vZ7FqPpE45Z
 h6r5IKGqAIEAgUzRT8NU2bt8t1QAxPVzSF77858Ah83ABLfwnDCckynLsBHW6a0N
 XIUP8yx1pIUz8OhIoPsZ5BktA1WrVxE0tX0lsjXnlJN8X6UglxM=
 =yDDU
 -----END PGP SIGNATURE-----

Merge tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt7623: add USB nodes
mt7629: update PCIe node to new format

* tag 'v5.15-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  dt-bindings: arm: Add MT6589 Fairphone 1
  ARM: dts: mediatek: Update MT7629 PCIe node for new format
  arm: dts: mt7623: add otg nodes for bpi-r2
  arm: dts: mt7623: add musb device nodes

Link: https://lore.kernel.org/r/7135d46f-5fb9-b46d-96d4-3b38548fe23e@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 22:14:10 +02:00
Arnd Bergmann
d1edc9865c arm64: tegra: Device tree changes for v5.16-rc1 
This enables additional interrupts on the Tegra194 GPIO controller for
 better load balancing and/or virtualization, adds audio support on
 Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
 enables more audio processors that are found on Tegra210 and later.
 
 Various cleanups across the board top things off.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmFgotUTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoaYVD/9XwbRdNCseQB/fj36HQPtyCPC8ZISd
 2RHu+Jx+XN0L4aChGaM4iBi1/RxrAcFHbQb4HI8IsI0IoMgHcfNSUd+rlfUNDzEX
 Wy1O3CoJa4Z8FO6i3PsRAEOCPZgudglhU5PNmnV32OoXSNSv9EzvWXI+EaZwb8fd
 VHF9yuXa1CXJqz5OuVoCIK/8IopbVf4w5qlgr+SJRok+j3xVTx68eMracvoTx71R
 I6kWGLk0vRfySUO8FQwi69RMqvzVH/doDiu9FZcB89OWPBCokgxQY0THLm1/A7c7
 VstmsQUodwflz47drrAQoel6RsqHmpAqbn+SfxpdKwCEQBcbXTSjCqJ5zfqIBaRC
 qJUb0oNB9mS2TbTZ4CQz579BcXy4FE+JW0nANO1tqkUqRa1JcJDN8P6CMJE04Dka
 fCG+IWs1IRBPeLEvbgg6fpJ581pVGr+sqKiGr9FnYHwKPLXNfyX6jCvtvWsXfmAo
 9u36b8kcdrAvGuEZTiumboIP81sGYYEzP4GjnOB7JjLbtUpGTllDDTuTJdSozScJ
 dlEzoLNuNJDqk3Lq0GqIdy0BTyJVy+9xudD8RpP+T3vvS3PvWp4GAQoH0k3pdbtV
 fLpgl8UM7uoPHKoFy80aqS0RTDoq8/818qnKLpAeurPsivu2pbLRTB29/10x8TYr
 1domUAtN/S44Bg==
 =rNmg
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkmi4ACgkQmmx57+YA
 GNmp6Q/9Hq2UTbGAcwfdtCyS8zazz3uyPoI6EToqyAA+FFllW6uIZrP1fo7UCjL3
 U95L9n4iyGGTf8Xm4isVxZoJlIPqf61eXb6kqVhMz9BpuEEcpvQ/SZgGVnIU7hmU
 rZeiQC5l2tK3o4EUrgRkLBJzY6jlcjEowRMxrjn6n7WUmdw1y1KwGe/BLC+6xrR3
 /q2VZzcVtMWUR7jucwOSdUtdyTKOADRuqHe7R7zjIkmkffOa/dimyJwBjT0YXFZo
 nl9W6TdLcDmu9gTTU7YAL1kvSG5kTri53jsRymBd6Tu9ZAqtaUGqqJ+b6VEf58KV
 S2Q8vu6OoGZonGCEtWO5OuR08fWdK09xJKrII/7gV4GVSPKZN0zrcb/ZOmOxhgvu
 UuO9UqGF45rhvgSIjyxXEAT/AKg1nIWL0x32Qex7n1sCl1M/uWLhhmWjp0aop0dK
 z+Gkso2Vqsj0/MGTNQHiDmCwsR9oNgxpB1DuD7ulsofQDqKcI3VcMth+WOiUPrs0
 cpr2gUpu/ZXT+yVDg2hgxiWuh+OoUa0IOC2l9iEPAehQDO/CmWuxOK+JoRH9NZFa
 Cyq86xsi+x1ocGqehu3Gn5k61iSzG+S9fjjBb1DEIlM+M8Xvejex59gX7hr48gDL
 WpT84s2iElQ6chDWDMgnZ3s3G1BKV6JsdcW2e6xYGuZG2Jwa1W4=
 =dOYU
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.16-rc1

This enables additional interrupts on the Tegra194 GPIO controller for
better load balancing and/or virtualization, adds audio support on
Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
enables more audio processors that are found on Tegra210 and later.

Various cleanups across the board top things off.

* tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Fix pcie-ep DT nodes
  arm64: tegra: Remove useless usb-ehci compatible string
  arm64: tegra: Extend APE audio support on Jetson platforms
  arm64: tegra: Add few AHUB devices for Tegra210 and later
  arm64: tegra: Remove unused backlight-boot-off property
  arm64: tegra: Add NVDEC to Tegra186/194 device trees
  arm64: tegra: Add new USB PHY properties on Tegra132
  arm64: tegra: Update HDA card name on Jetson TX2 NX
  arm64: tegra: Audio graph sound card for Jetson TX2 NX
  arm64: tegra: Add additional GPIO interrupt entries on Tegra194

Link: https://lore.kernel.org/r/20211008201132.1678814-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 22:10:22 +02:00
Arnd Bergmann
cda490402d dt-bindings: Changes for v5.16-rc1 
This contains the DT bindings for the NVDEC hardware video decoder found
 on Tegra210 and later chips as well as a node name fix for the examples
 in the Tegra194 PCIe controller (endpoint mode) DT bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmFgnvwTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeCFD/9cJsKiAMicIQurlDVI02Dxf6VKHbxX
 11z1jPWzOwBkLrvDISjpWkgN8CMuPEg2NHlZ2ei87nqqFPKWsvPVsib3iHUAy8QY
 EVgI5Y56VFamH8mBmiPlSe0XB3vcdIx+3xivylDiHRRYwX/VaVl5hGi5BZM903Iv
 T2/Ompq7Jyeif4yH+GOIbwS4gGVQKi+LywpYAMac1NfYWP4DrBCqLh5VyNZD5t2T
 9OgDby8DrhnAtGpTOyrrQfsPo42+N1LDufP3iU7Bx28fdQWRCcth130ZABNKtOR0
 4e0V21lnHlyMWZyjABuXxEX2cPy/MlSa3X9RCZsH7FJdYSZdQFzBvRnGC58PERek
 I2x0JIuYmQh/3LvbRMKVKdkd3qWdKEWaaHES/i/A+gBbQloHYEIp3fkkga8SmU21
 BwCMB/OtPbpRI62aXSQ6C0VHLKdqwdHHwkjpbvdo2tQQfO5MdW074hLMAQacmzIj
 B7qg55bt465lL6253oCjXswN/CBlHqQ7OJNUE0EIbKsRGy4u3L9YdKPZwidn+qB2
 xArO0CkybZO3shPnwvzeZ2bZ34oU3tPgAYZI8UrGDgUB/lgjKVQeDGwQb0gbKCkS
 w3L+xnS7L2XbjHwXL73x0YVtUWYFVl7zvLcgDf73slOydO+2P34x6nylsNmhD19p
 lZAKTDbxlsX8XA==
 =TONa
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFklpwACgkQmmx57+YA
 GNnsoBAAgWmtn9EZOA4QVWwgcGoBU9BE8iEiJQe7ENupZ+ofjQvez6p57AM0phfM
 b2sctz66Rba2SabBqq8fGt1zOMH3RAmnY8QNhdJX22xyLltmX7dPJV2VlTBVTOGn
 p69aVgUL1cLIU7LGdUAW5fTgiu5kNLG+XsFZaIPh0iVy9tDfwFs1hYNWnasivm2u
 1A/sp+NGVA/YNdvun6gU/hXOqG20YFAUxushZthDZwdspYnyB5JBkNyRC27LQknb
 cJ9Y/su3PWKNZrE6e0Kcln7mhZ4303vciZfhzVrrG3HpKxu2jrowNKTbZLhJFXRp
 JkCY/bhhPc9VpZPfc34tBdiU7Y7Xo44R3IdqY77/+Pi0wXpxFyY+b0rAFSqWlOag
 j489y4Casg7wPebpvmhi+YtkmujpxLV455V/qb8Nyu8Zv5TNAjkb/sGDXnRsSrZl
 ijNXJ40/DknbAXeXFLbhWzuuKxN6wAKGgZTPAsPVchgTDll7IULJERZlgXzc4KKg
 rN0f7r00ECj0uS6Wm66+HUtPvQrTJE8w8++dhFzUXeR8mjUTUbD2TJ7XaFHlDAzQ
 qUpa8UylfJvUsHvQIPQKUnNEc0jQrkAkgI5YCRa+5szIKIx/KtDCyD6AVJgGo+0c
 QvK0xsU5h/U+KUjtuJG5uzOSH08U57T1F1JZVdoB/CG6lEIPkL8=
 =cvhE
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

dt-bindings: Changes for v5.16-rc1

This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.

* tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
  dt-bindings: Add YAML bindings for NVDEC

Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 21:55:08 +02:00
Chunyan Zhang
23410de579
 		arm64: dts: Add support for Unisoc's UMS512 
Add basic DT to support Unisoc's UMS512, with this patch,
the board ums512-1h10 can run into console.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20211008034533.343167-3-zhang.lyra@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 21:53:55 +02:00
Chunyan Zhang
77d7e51ebe
 		dt-bindings: arm: Add bindings for Unisoc's UMS512 
Added bindings for Unisoc's ums512-1h10 board and ums512 SoC.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211008034533.343167-2-zhang.lyra@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 21:53:54 +02:00
Arnd Bergmann
1649069312 Amlogic ARM64 DT changes for v5.16: 
- New Boards (with bindings):
   - Radxa Zero
   - Jethub D1 & H1 home automation controllers
 - Misc Changes:
   - add Ethernet PHY reset line for ODROID-C4/HC4
   - add audio playback nodes to rbox-pro
   - Fix the pwm regulator supply properties
   - meson-g12b-odroid-n2: add missing 5v regulator gpio
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmFewM0ACgkQd9zb2sjI
 SdEqAQ//Rekq0ugm358sg434utmQ+2Ney7Qjuu9q/qmm3mZCtX7im7ejyp/5niTg
 aGcvtDn1U1iR+7uPsp/5u1SV7zE+DT7XwcALMxHLrDqa9PNkLEqgn4PMKdrw7JYb
 O0hWcGG0P9nI9o7XZDS+zR6DU6CTrutmlK7ZpuoY0cZDdJg9ZvF2zjx1aTbw52+N
 iB0wutDJpqhKU4nSMnndnmlSVXsHRvrZcWRROrBcbD8IiNDlPW7e2LU0tbPizHhq
 +lfZqNNIxv/0v+Cgfg1YSJeV2fvIju/BNGWsU2zUELf+mndrZyF89+HUu/Kbf9AO
 u+FitXp2OVF/W2I7kgdRtxXvwDWRhWdVHQT8nWDNrNmO4d0paT7TzaXU046HRDkk
 ypTZZXDsmOe3cQ0xXz3ggW+VaCjulRChLI/oW5+56HMPuqtR1Nl0o3xkTwddWejs
 Ol8Gor6upv6F3dP89uzERLo0OeJ4n0v8Dh8du8dPqu8kUrJC5OCXLR8TiIylKmtS
 RUlP7oCOR7/u7e18vdSoTDyuCX+laCzuCkgBUuRUndW0uJCLDgEaYw8fRru8VwGS
 brU/DMIbXRStOviIhxQjYR4uwXQAAZompZCQnSKCwMH/hMm9YyAUcTtMMRs0hv+3
 MPrx4NT69M9Q8TQthkEduR7hRINCD1iUaL/M4gjWxO1XYJOKyoU=
 =2tyw
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkVEsACgkQmmx57+YA
 GNkZjhAAuQGq6bnQjP3l7lsalzvk3MMDKYb+2ot810sBtStbxPabhu9m0GawOYsd
 NSzdCSFpBYFNyy1PqzDWDvl1Vf84Yhs2BZRqIFHxP8vM3udE26MpS9nXuByWvCfA
 8Ljl6+3qaMpBwfD0wlsIQj0z1Bdzcc4ASn7yE4gbNpU9BvcVnDEcuqxN1rvdibuQ
 OCKCSXqAZ8jCiikMrV2cfaFjK3fFq8rdDJg7tkYGN1+wGcokR5CKV08EsoNBOOhf
 6Jv2C+7LD/B7NFMXBWCEe/HSr2Qllu3+Yn5F+MUShxuqq5USCaV9DlwYmnkPpmk/
 RmuyIxVowYeBZ9wEgr0TJURu3/Vr7E+WkbKhFr11KKfXxhbVxtpZ5H/PvHtIAZ8b
 yEbOWzHtR6HEOoM9Ydd5ffSQB/uf5Ce/zV5tlB1USJDXsRe2ScEAE9fnOXVUntDy
 Mcq4io8ZlKpAF3dXQGVpZV4g23HzoRI+GBvrhu7n6RphQGxblssQLjg+0mSm0F5x
 Quc7iwDZJnBbDcdayHUSU8vYJsvxrl8PV6h1nmCfN4GyXh4U6g4hOV/tmFYa1BWE
 m+ugP+RA9jqyj8yFFtcrYFRimqyhBy8thKWWmYe7+xUd+H9ACRLnIvdsd9I4xl5T
 SqzIsfku5qGJwNuHoc3t2QW2bAwiH4VUqVf0FQ4UOG56pBse6P8=
 =wQxa
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changes for v5.16:
- New Boards (with bindings):
  - Radxa Zero
  - Jethub D1 & H1 home automation controllers
- Misc Changes:
  - add Ethernet PHY reset line for ODROID-C4/HC4
  - add audio playback nodes to rbox-pro
  - Fix the pwm regulator supply properties
  - meson-g12b-odroid-n2: add missing 5v regulator gpio

* tag 'amlogic-arm64-dt-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson-g12b-odroid-n2: add 5v regulator gpio
  arm64: dts: meson-sm1: Fix the pwm regulator supply properties
  arm64: dts: meson-g12b: Fix the pwm regulator supply properties
  arm64: dts: meson-g12a: Fix the pwm regulator supply properties
  arm64: dts: meson: add audio playback to rbox-pro
  arm64: dts: meson-axg: add support for JetHub D1
  arm64: dts: meson-gxl: add support for JetHub H1
  dt-bindings: vendor-prefixes: add jethome prefix
  dt-bindings: arm: amlogic: add bindings for Jethub D1/H1
  arm64: dts: amlogic: add support for Radxa Zero
  dt-bindings: arm: amlogic: add support for Radxa Zero
  arm64: dts: meson: sm1: add Ethernet PHY reset line for ODROID-C4/HC4

Link: https://lore.kernel.org/r/cc0a3af0-b1b1-dbe1-f553-cf58a1c63d0b@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 17:12:11 +02:00
Arnd Bergmann
687d67639b arm64: dts: ZynqMP DT changes for v5.16-v2 
- Add support for Kria SOM board
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCYV6e2AAKCRDKSWXLKUoM
 IS/BAKCZ7K9fo7UhgytlPzxnY99nm3wu9QCeK/0bs3dHFgOv3ICARrQMwrzZzuA=
 =jrSM
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmFkU9cACgkQmmx57+YA
 GNnVTRAAvViib69MVXtwdWr6e984+UaQtkIw4aiEJoVchU8P7FalAvOqfjNP9Buo
 Mp1SMleTBQAigF4oWE/IuukOVlI5x6sbN6qrpzb/sKQ3NBn4l/MT71UaP8mrs9of
 CnUzRWGJxlu7oaQX65ZCAc01jdFhyai9/o6gipP17LWHZUaGZVI6P43/17JW/EP0
 QWuOyb0swgPLhUTbtSpZQdR5G5Y+b98nfOAhwYSxngSI4/xYzR2md8blt1hwVol8
 3d2laoz2PtfR/LYuWFmgr95KdUza/H9EL00WRo0hrhdGItG3C7/jZ/FlqAOzME7o
 P+AS1YSCqIR37IJTqEckjHO8iAkeEIJGVyRDhRXlu/HJ93f2DWpMAFszv3Bphdh/
 JD5qvs7tfC8oZTCI/RU7ovbcg0U9iMlAu16UfnV8Tcp37kuGOa8564nLh9YbaJxG
 YXPLhSkkxg9axTJX7AHcVK9W5oRszneHA0o/kDHdvqGcZQR6Sl8a6yCaS8beeTcS
 UbCJYry1eIthkpB3GzwFiriUVsfRHfX1qmvTcuvaNQ2viZNqVB52Ela+v2JLCpbE
 lbFE0eTim3kPdcQta8qFT0iJklezLFDL/cXYMl+ApongbUB2khXPn7a6/ugn3tCE
 tU5FtuXUHdZnYKiYaW0ucxZEkVVQRsSbiyn2QpJdPRzd8sGzj5U=
 =JffT
 -----END PGP SIGNATURE-----

Merge tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx into arm/dt

arm64: dts: ZynqMP DT changes for v5.16-v2

- Add support for Kria SOM board

* tag 'zynqmp-dt-for-v5.16-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: zynqmp: Add support for Xilinx Kria SOM board

Link: https://lore.kernel.org/r/9815867c-ffbb-fc9d-64b9-badee5e2862b@xilinx.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 2021-10-11 17:10:15 +02:00
Biju Das
34cdc0edfe arm64: dts: renesas: rzg2l-smarc: Enable microSD on SMARC platform 
This patch enables microSD card slot connected to SDHI1 on RZ/G2L SMARC
platform.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-11 10:55:48 +02:00
Biju Das
a60a311cb8 arm64: dts: renesas: rzg2l-smarc-som: Enable eMMC on SMARC platform 
RZ/G2L SoM has both 64 GB eMMC and microSD connected to SDHI0.

Both these interfaces are mutually exclusive and the SD0 device
selection is based on the XOR between GPIO_SD0_DEV_SEL and SW1[2]
switch position.

This patch sets GPIO_SD0_DEV_SEL to high in DT. Use the below switch
setting logic for device selection between eMMC and microSD slot
connected to SDHI0.

Set SW1[2] to position 2/OFF for selecting eMMC
Set SW1[2] to position 3/ON for selecting microSD

This patch enables eMMC on RZ/G2L SMARC platform by default.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-11 10:55:48 +02:00
Florian Fainelli
0f937bc2f2 Stefan Wahren adds devicetree support for the Raspbery Pi Compute Module 
4 and its IO board
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEErOkkGDHCg2EbPcGjlfZmHno8x/4FAmFdWA8ACgkQlfZmHno8
 x/7O/Af8Dm5y9oZqVimMyrkN2/ULPXaxu0ULESQ84ow4aMCLL3kxk+huFMLZvWyj
 f4q/2Ni2bRWZXhb3ailMhmMhVDPf1kL5hswiw0jjY6qU9qtttQn7AOqOuP5T/BzS
 xEXexvBf1735jp1GjQzZu7pKesRdLwDD1RDxhPQ7TXiGs4ifkTaJ1sbBrnvg9HyT
 NanMRhPLVzhpqhbxLmOMdZemJnrMO2fzB12LkgDepI6ZU8kBG/fhgdfiosbvf5Es
 vYGcDbk7WjS0oLixdNvCV1Ivd48N5jSYKnvN+xy8lSqyAj1SXNlYrXo3ShQDsVgH
 Qh8b5r9/M4/iVMrs7WjW3waGQrV/4g==
 =mzUr
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmFgxlAACgkQh9CWnEQH
 BwRAvA//XV9z9oO+/22BWQ7u8xe+bYDHE2wcJ92m62yj9gbhR/RzWnX9C5x54dNc
 fDuv49bZvxQ7ytU6UuZE6ziT52k0qYmTKyrG655TswzREQcZVjZVu8dcqiy/f15c
 OmUsYQsZrL/FzxAXiNBKDgSybkg6aLt8T1f0B2pQiqE9hKj5Fxtwq8fSYCAoOqxD
 DoZC4TKP8jkw43gO0PA1t4zzaUF5fgvL7XBeR6CggG9UDugP5ExKbGEZpBhZaeqz
 mGFrBTyPrdcf7d3d29SU1mC/Uge4tSpiABcprddBUOYG2f+7HSBn18MM1oTnFPsk
 w4pv4dc/m3SuJ2OlWtxjLxW3wgNZISCIkCZYEwHZBmCaPJwGMpFuVhIhr823wJXW
 kN0Sl1qbgXOxUkiEbJZ+ddVMmMJzB1ZEE1yU0lRGj48tmv3Uxg4gC/EVW7pl1Zto
 ofuxkkfqopRex6gQzFLhHM7MBuczX98kolCFgpPWcvlYsX2QvEhSDghMepKVmYfc
 cqV8VbnGmAXJCrm93Ty+innczu11RZucTeSro/mfVntPNyeABN4BogLz+l6uTIXZ
 MUEsd/jIUDEiq5F+0Pye8Mi67OqTjyfa9mXqIoj5C12iAZ+jW5Cg4FrcBj8r7ZYg
 CMVYrjuxZak/LLco99SH3lu5OBjXGqDtjb23LxfeoOP8SqyERFo=
 =ntsY
 -----END PGP SIGNATURE-----

Merge tag 'tags/bcm2835-dt-next-2021-10-06' into devicetree/next

Stefan Wahren adds devicetree support for the Raspbery Pi Compute Module
4 and its IO board

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
 2021-10-08 15:29:25 -07:00
Luca Weiss
1b17eee4d4 dt-bindings: arm: Add MT6589 Fairphone 1 
Add the compatible for Fairphone 1 smartphone with MT6589 SoC.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211005202833.96526-1-luca@z3ntu.xyz
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
 2021-10-08 16:33:16 +02:00
Biju Das
a83ad872f4 arm64: dts: renesas: r9a07g044: Add SDHI nodes 
Add SDHI{0, 1} nodes to RZ/G2L SoC DTSI.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211007155451.10654-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
 2021-10-08 15:17:56 +02:00