Recent changes that started checking the codec version broke audio on
the Lenovo ThinkPad X13s:
wsa_macro 3240000.codec: Unsupported Codec version (0)
wsa_macro 3240000.codec: probe with driver wsa_macro failed with error -22
rx_macro 3200000.rxmacro: Unsupported Codec version (0)
rx_macro 3200000.rxmacro: probe with driver rx_macro failed with error -22
Add the missing codec version to the lookup table so that the codec
drivers probe successfully.
Note that I'm just assuming that this is a 2.0 codec based on the fact
that this device uses the older register layout.
Fixes: 378918d591 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Fixes: dbacef0589 ("ASoC: codec: lpass-rx-macro: prepare driver to accomdate new codec versions")
Fixes: 727de4fbc5 ("ASoC: codecs: lpass-wsa-macro: Correct support for newer v2.5 version")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240729131351.27886-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As the comment explains, the while loop ensures that runtime fits into
32 bits. Since do_div() casts the divisor to u32 anyway, explicitly cast
runtime to u32 to remove the following Coccinelle/coccicheck warning
reported by do_div.cocci:
WARNING: do_div() does a 64-by-32 division, please consider using div64_s64 instead
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Link: https://lore.kernel.org/r/20240711132001.92157-1-thorsten.blum@toblux.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace a comma between expression statements by a semicolon for
more readability.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240711013436.2655373-1-nichen@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With the new __counted_by annotation, the "lli_size" variable needs to
valid for accesses to the "lli" array. This requirement is not met in
stm32_dma3_chan_desc_alloc(), since "lli_size" starts at "0", so "lli"
index "0" will not be considered valid during the initialization for loop.
Fix this by setting lli_size immediately after allocation (similar to
how this is handled in stm32_mdma_alloc_desc() for the node/count
relationship).
Fixes: f561ec8b2b ("dmaengine: Add STM32 DMA3 support")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716213830.work.951-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With the new __counted_by annocation, the "sglen" struct member must
be set before accessing the "sg" array. This initialization was done in
other places where a new struct omap_desc is allocated, but these cases
were missed. Set "sglen" after allocation.
Fixes: b85178611c ("dmaengine: ti: omap-dma: Annotate struct omap_desc with __counted_by")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240716215702.work.802-kees@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the Renesas RZ/G3S DMAC block. This is identical to the one found
on the RZ/G2L SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240711123405.2966302-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently there are two names utilized in the driver to keep the functions
call status: ret and err. For the sake of unification convert to using the
first version only.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-7-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In order to have a more coherent DW AHB DMA slave configuration method -
dwc_config() - let's simplify the source and destination channel max-burst
calculation procedure:
1. Create the max-burst verification method as it has been just done for
the memory and peripheral address widths. Thus the dwc_config() method
will turn to a set of the verification methods execution.
2. Since both the generic DW AHB DMA and Intel iDMA 32-bit engines support
the power-of-2 bursts only, then the specified by the client driver
max-burst values can be converted to being power-of-2 right in the
max-burst verification method.
3. Since max-burst encoded value is required on the CTL_LO fields
calculation stage, the encode_maxburst() callback can be easily dropped
from the dw_dma structure meanwhile the encoding procedure will be
executed right in the CTL_LO register value calculation.
Thus the update will provide the next positive effects: the internal
DMA-slave config structure will contain only the real DMA-transfer config
values, which will be encoded to the DMA-controller register fields only
when it's required on the buffer mapping; the redundant encode_maxburst()
callback will be dropped simplifying the internal HW-abstraction API;
dwc_config() will look more readable executing the verification functions
one-by-one.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-6-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As a preparatory change before dropping the encode_maxburst() callbacks
let's move dw_dma_encode_maxburst() and idma32_encode_maxburst() to being
defined above the dw_dma_prepare_ctllo() and idma32_prepare_ctllo()
methods respectively. That's required since the former methods will be
called from the later ones directly.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-5-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the CTL LO fields are calculated on the platform-specific basis.
It's implemented by means of the prepare_ctllo() callbacks using the
ternary operator within the local variables init block at the beginning of
the block scope. The functions code currently is relatively hard to
comprehend and isn't that optimal since implies four conditional
statements executed and two additional local variables defined. Let's
simplify the DW AHB DMA prepare_ctllo() method by unrolling the ternary
operators into the normal if-else statement, dropping redundant
master-interface ID variables and initializing the local variables based
on the singly evaluated DMA-transfer direction check. Thus the method will
look much more readable since now the fields content can be easily
inferred right from the if-else branch. Provide the same update in the
Intel DMA32 core driver for the sake of the driver code unification.
Note besides of the effects described above this update is basically a
preparation before dropping the max burst encoding callback. The dropping
will require to call the burst fields calculation methods right in the
prepare_ctllo() callbacks. It would have made the later functions code
even more complex should they were left in the original state.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-4-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently in case of the DEV_TO_MEM or MEM_TO_DEV DMA transfers the memory
data width (single transfer width) is determined based on the buffer
length, buffer base address or DMA master-channel max address width
capability. It isn't enough in case of the channel disabling prior the
block transfer is finished. Here is what DW AHB DMA IP-core databook says
regarding the port suspension (DMA-transfer pause) implementation in the
controller:
"When CTLx.SRC_TR_WIDTH < CTLx.DST_TR_WIDTH and the CFGx.CH_SUSP bit is
high, the CFGx.FIFO_EMPTY is asserted once the contents of the FIFO do not
permit a single word of CTLx.DST_TR_WIDTH to be formed. However, there may
still be data in the channel FIFO, but not enough to form a single
transfer of CTLx.DST_TR_WIDTH. In this scenario, once the channel is
disabled, the remaining data in the channel FIFO is not transferred to the
destination peripheral."
So in case if the port gets to be suspended and then disabled it's
possible to have the data silently discarded even though the controller
reported that FIFO is empty and the CTLx.BLOCK_TS indicated the dropped
data already received from the source device. This looks as if the data
somehow got lost on a way from the peripheral device to memory and causes
problems for instance in the DW APB UART driver, which pauses and disables
the DMA-transfer as soon as the recv data timeout happens. Here is the way
it looks:
Memory <------- DMA FIFO <------ UART FIFO <---------------- UART
DST_TR_WIDTH -+--------| | |
| | | | No more data
Current lvl -+--------| |---------+- DMA-burst lvl
| | |---------+- Leftover data
| | |---------+- SRC_TR_WIDTH
-+--------+-------+---------+
In the example above: no more data is getting received over the UART port
and BLOCK_TS is not even close to be fully received; some data is left in
the UART FIFO, but not enough to perform a bursted DMA-xfer to the DMA
FIFO; some data is left in the DMA FIFO, but not enough to be passed
further to the system memory in a single transfer. In this situation the
8250 UART driver catches the recv timeout interrupt, pauses the
DMA-transfer and terminates it completely, after which the IRQ handler
manually fetches the leftover data from the UART FIFO into the
recv-buffer. But since the DMA-channel has been disabled with the data
left in the DMA FIFO, that data will be just discarded and the recv-buffer
will have a gap of the "current lvl" size in the recv-buffer at the tail
of the lately received data portion. So the data will be lost just due to
the misconfigured DMA transfer.
Note this is only relevant for the case of the transfer suspension and
_disabling_. No problem will happen if the transfer will be re-enabled
afterwards or the block transfer is fully completed. In the later case the
"FIFO flush mode" will be executed at the transfer final stage in order to
push out the data left in the DMA FIFO.
In order to fix the denoted problem the DW AHB DMA-engine driver needs to
make sure that the _bursted_ source transfer width is greater or equal to
the single destination transfer (note the HW databook describes more
strict constraint than actually required). Since the peripheral-device
side is prescribed by the client driver logic, the memory-side can be only
used for that. The solution can be easily implemented for the DEV_TO_MEM
transfers just by adjusting the memory-channel address width. Sadly it's
not that easy for the MEM_TO_DEV transfers since the mem-to-dma burst size
is normally dynamically determined by the controller. So the only thing
that can be done is to make sure that memory-side address width is greater
than the peripheral device address width.
Fixes: a09820043c ("dw_dmac: autoconfigure data_width or get it via platform data")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-3-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Currently the src_addr_width and dst_addr_width fields of the
dma_slave_config structure are mapped to the CTLx.SRC_TR_WIDTH and
CTLx.DST_TR_WIDTH fields of the peripheral bus side in order to have the
properly aligned data passed to the target device. It's done just by
converting the passed peripheral bus width to the encoded value using the
__ffs() function. This implementation has several problematic sides:
1. __ffs() is undefined if no bit exist in the passed value. Thus if the
specified addr-width is DMA_SLAVE_BUSWIDTH_UNDEFINED, __ffs() may return
unexpected value depending on the platform-specific implementation.
2. DW AHB DMA-engine permits having the power-of-2 transfer width limited
by the DMAH_Mk_HDATA_WIDTH IP-core synthesize parameter. Specifying
bus-width out of that constraints scope will definitely cause unexpected
result since the destination reg will be only partly touched than the
client driver implied.
Let's fix all of that by adding the peripheral bus width verification
method and calling it in dwc_config() which is supposed to be executed
before preparing any transfer. The new method will make sure that the
passed source or destination address width is valid and if undefined then
the driver will just fallback to the 1-byte width transfer.
Fixes: 029a40e97d ("dmaengine: dw: provide DMA capabilities")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240802075100.6475-2-fancer.lancer@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the missing clk_disable_unprepare() before return in
geni_i2c_runtime_resume().
Fixes: 14d02fbadb ("i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmawnmwACgkQu+CwddJF
iJqHkAf/an9TIC3VOt1LXZBXNt5xGXK5azhRbhfCih2F11lH5MlaHpuJJI8iJdVN
4G+cifmn+e9f9k+6FKc96xStV5g4OvRoxPYfZrgvcTTDDs2jCU1qyG/aDqopsyeA
zh/lcH+jXUXCpX2Y0TUhUwOeaKf2qyb2eArpw+bqnJ7aCAEbqxPi5egwA9uEO+71
g1moNP8KF3PBiOvE295RnF/+A91fOBt/1kPjTRRxWQxtp04nptATKZNEfEVFrNw5
jPata6cK1x/Hce8P2RitQsUlVBE53lllNeunZR2KQ0Qu1LiO7Yo8iyVywKhk+4V9
f8NwZ+sL+s/YCQvd2W80yhQ+iTQkKg==
=sfE2
-----END PGP SIGNATURE-----
Merge tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
"Since v6.8 we've had a subtle breakage in SLUB with KFENCE enabled,
that can cause a crash. It hasn't been found earlier due to quite
specific conditions necessary (OOM during kmem_cache_alloc_bulk())"
* tag 'slab-fixes-for-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slub: do not call do_slab_free for kfence object
While it requires to have the right phy driver loaded (i.e. motorcomm)
to make the phy asserting the right delays, this is generally the
preferred way to define the MAC <-> PHY connection.
Signed-off-by: Uwe Kleine-König <ukleinek@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240304084612.711678-2-ukleinek@debian.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On a few Kria KR260 Robotics Starter Kit the PS-GEM SGMII linkup is not
happening after the resume. This is because serdes registers are reset
when FPD is off (in suspend state) and needs to be reprogrammed in the
resume path with the same default initialization as done in the first
stage bootloader psu_init routine.
To address the failure introduce a set of serdes registers to be saved in
the suspend path and then restore it on resume.
Fixes: 4a33bea003 ("phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver")
Signed-off-by: Piyush Mehta <piyush.mehta@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1722837547-2578381-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The HDMI PHY PLL can be used as an alternative dclk source to RK3588 SoC
CRU. It provides more accurate clock rates required by VOP2 to improve
existing support for display modes handling, which is known to be
problematic when dealing with non-integer refresh rates, among others.
It is worth noting this only works for HDMI 2.0 or below, e.g. cannot be
used to support HDMI 2.1 4K@120Hz mode.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-4-6a2d2164e508@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The HDMI PHY can be used as a clock provider on RK3588 SoC, hence add
the necessary '#clock-cells' property.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-3-6a2d2164e508@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When a new PHY is created via [devm_]phy_create(), the runtime PM for it
is not enabled unless the parent device (which creates the PHY) has its
own runtime PM already enabled.
Move the call to devm_pm_runtime_enable() before devm_phy_create() to
enable runtime PM at PHY core level.
With this change the ->power_on() and ->power_off() callbacks do not
require explicit runtime PM management anymore, since the PHY core
handles that via phy_pm_runtime_{get,put}_sync() when phy_power_on() and
phy_power_off() are invoked.
Hence drop the now unnecessary calls to pm_runtime_resume_and_get() and
pm_runtime_put() helpers.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-2-6a2d2164e508@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Driver makes use of helpers from pm_runtime.h, but relies on the header
file being implicitly included.
Explicitly pull the header in to avoid potential build failures in some
configurations.
Fixes: 553be2830c ("phy: rockchip: Add Samsung HDMI/eDP Combo PHY driver")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240620-rk3588-hdmiphy-clkprov-v2-1-6a2d2164e508@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The iterated nodes are direct children of the device node, and the
`device_for_each_child_node()` macro accounts for child node
availability.
`fwnode_for_each_available_child_node()` is meant to access the child
nodes of an fwnode, and therefore not direct child nodes of the device
node.
Use `device_for_each_child_node()` to indicate device's direct child
nodes.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240805-device_for_each_child_node-available-v3-2-48243a4aa5c0@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Torrent SERDES can support at most two different protocols (PHY types).
This only mandates that the device-tree sub-nodes used to represent the
configuration should describe links with at-most two different protocols.
The existing implementation however imposes an artificial constraint that
allows only two links (device-tree sub-nodes). As long as at-most two
protocols are chosen, using more than two links to describe them in an
alternating configuration is still a valid configuration of the Torrent
SERDES.
A 3-Link 2-Protocol configuration of the 4-Lane SERDES can be:
Lane 0 => Protocol 1 => Link 1
Lane 1 => Protocol 1 => Link 1
Lane 2 => Protocol 2 => Link 2
Lane 3 => Protocol 1 => Link 3
A 4-Link 2-Protocol configuration of the 4-Lane SERDES can be:
Lane 0 => Protocol 1 => Link 1
Lane 1 => Protocol 2 => Link 2
Lane 2 => Protocol 1 => Link 3
Lane 3 => Protocol 2 => Link 4
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240805092607.143869-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The recent switch to drmm allocation in drm_bridge_connector_init() may
cause double free on bridge_connector in some of the error handling
paths.
Drop the explicit kfree() calls on bridge_connector.
Fixes: c12907be57 ("drm/bridge-connector: switch to using drmm allocations")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: default avatarRobert Foss <rfoss@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240711-bridge-connector-fix-dbl-free-v1-1-d558b2d0eb93@collabora.com
Now when we only got one set of ethtool_ops and netdev_ops, remove the
"hwts" suffix from the struct variables
kvaser_usb_{ethtool,netdev}_ops_hwts.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-16-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Remove no longer used struct variables, kvaser_usb_ethtool_ops and
kvaser_usb_netdev_ops.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-15-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Remove KVASER_USB_QUIRK_HAS_HARDWARE_TIMESTAMP, since all devices got
hardware timestamp support.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-14-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add hardware timestamp support for all usbcan based devices (M16C).
The usbcan firmware is slightly different compared to the other Kvaser USB
interfaces:
- The timestamp is provided by a 32-bit counter, with 10us resolution.
Hence, the hardware timestamp will wrap after less than 12 hours.
- Each Rx CAN or Tx ACK command only contains the 16-bits LSB of the
timestamp counter.
- The 16-bits MSB are sent in an asynchronous event (command), if any
change occurred in the MSB since the last event.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-13-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Store MSB of timestamp, provided from the device via the clock overflow
event, for usbcan devices (M16C).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-12-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For usbcan devices (M16C), add struct usbcan_cmd_tx_acknowledge for Tx ACK
commands and struct usbcan_cmd_clk_overflow_event for clock overflow event
commands.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-11-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add hardware timestamp support to leaf based devices (M32C and leafimx).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-10-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename local variable skb to err_skb.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-9-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add new struct kvaser_usb_dev_cfg constants,
kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz,
for M32C based leaf devices.
Note that the bittiming parameters are always calculated for 16MHz clock,
while the timestamps are in the actual clock frequency of the device.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-8-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Assign correct timestamp_freq to kvaser_usb_leaf_imx_dev_cfg_{16,24,32}mhz.
Since the driver didn't utilize the value, this didn't cause any problems.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add, struct leaf_cmd_tx_acknowledge, for Tx ACK commands received from leaf
devices (M32C and leafimx28).
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Set hardware timestamp on transmitted packets.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add, struct kvaser_cmd_tx_ack, for standard Tx ACK commands.
Expand kvaser_usb_hydra_ktime_from_cmd() to extract timestamps from both
standard and extended Tx ACK commands. Unsupported commands are silently
ignored, and 0 is returned.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename function, since this function will be used for more than just the
rx commands.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add helper function kvaser_usb_ticks_to_ktime() that converts from
device ticks to ktime.
And kvaser_usb_timestamp{48,64}_to_ktime() that converts from device
48-bit or 64-bit timestamp, to ktime.
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240701154936.92633-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Mätje <stefan.maetje@esd.eu> says:
The goal of this patch series is to do some cleanup
and also add the support for the one-shot mode before
the next patch introduces CAN-FD support for this
driver.
Link: https://lore.kernel.org/all/20240717214409.3934333-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds support for one-shot mode. In this mode there happens no
automatic retransmission in the case of an arbitration lost error or on
any bus error.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20240717214409.3934333-3-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Rename macros to use for esdACC CTRL register access to match the
internal documentation and to make the macro prefix consistent.
- ACC_CORE_OF_CTRL_MODE -> ACC_CORE_OF_CTRL
Makes the name match the documentation.
- ACC_REG_CONTROL_MASK_MODE_ -> ACC_REG_CTRL_MASK_
ACC_REG_CONTROL_MASK_ -> ACC_REG_CTRL_MASK_
Makes the prefix consistent for macros describing masks in the same
register (CTRL).
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20240717214409.3934333-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The dependencies in tools/lib/bpf/Makefile are incorrect. Before we
recurse to build $(BPF_IN_STATIC), we need to build its 'fixdep'
executable.
I can't use the usual shortcut from Makefile.include:
<target>: <sources> fixdep
because its 'fixdep' target relies on $(OUTPUT), and $(OUTPUT) differs
in the parent 'make' versus the child 'make' -- so I imitate it via
open-coding.
I tweak a few $(MAKE) invocations while I'm at it, because
1. I'm adding a new recursive make; and
2. these recursive 'make's print spurious lines about files that are "up
to date" (which isn't normally a feature in Kbuild subtargets) or
"jobserver not available" (see [1])
I also need to tweak the assignment of the OUTPUT variable, so that
relative path builds work. For example, for 'make tools/lib/bpf', OUTPUT
is unset, and is usually treated as "cwd" -- but recursive make will
change cwd and so OUTPUT has a new meaning. For consistency, I ensure
OUTPUT is always an absolute path.
And $(Q) gets a backup definition in tools/build/Makefile.include,
because Makefile.include is sometimes included without
tools/build/Makefile, so the "quiet command" stuff doesn't actually work
consistently without it.
After this change, top-level builds result in an empty grep result from:
$ grep 'cannot find fixdep' $(find tools/ -name '*.cmd')
[1] https://www.gnu.org/software/make/manual/html_node/MAKE-Variable.html
If we're not using $(MAKE) directly, then we need to use more '+'.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240715203325.3832977-4-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'fixdep' tool is used to post-process dependency files for various
reasons, and it runs after every object file generation command. This
even includes 'fixdep' itself.
In Kbuild, this isn't actually a problem, because it uses a single
command to generate fixdep (a compile-and-link command on fixdep.c), and
afterward runs the fixdep command on the accompanying .fixdep.cmd file.
In tools/ builds (which notably is maintained separately from Kbuild),
fixdep is generated in several phases:
1. fixdep.c -> fixdep-in.o
2. fixdep-in.o -> fixdep
Thus, fixdep is not available in the post-processing for step 1, and
instead, we generate .cmd files that look like:
## from tools/objtool/libsubcmd/.fixdep.o.cmd
# cannot find fixdep (/path/to/linux/tools/objtool/libsubcmd//fixdep)
[...]
These invalid .cmd files are benign in some respects, but cause problems
in others (such as the linked reports).
Because the tools/ build system is rather complicated in its own right
(and pointedly different than Kbuild), I choose to simply open-code the
rule for building fixdep, and avoid the recursive-make indirection that
produces the problem in the first place.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/all/Zk-C5Eg84yt6_nml@google.com/
Link: https://lore.kernel.org/r/20240715203325.3832977-3-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
All built targets need fixdep to be built first, before handling object
dependencies [1]. We're missing one such dependency before the libsubcmd
target.
This resolves .cmd file generation issues such that the following
sequence produces many fewer results:
$ git clean -xfd tools/
$ make tools/objtool
$ grep "cannot find fixdep" $(find tools/objtool -name '*.cmd')
In particular, only a buggy tools/objtool/libsubcmd/.fixdep.o.cmd
remains, due to circular dependencies of fixdep on itself.
Such incomplete .cmd files don't usually cause a direct problem, since
they're designed to fail "open", but they can cause some subtle problems
that would otherwise be handled by proper fixdep'd dependency files. [2]
[1] This problem is better described in commit abb26210a3 ("perf
tools: Force fixdep compilation at the start of the build"). I don't
apply its solution here, because additional recursive make can be a bit
of overkill.
[2] Example failure case:
cp -arl linux-src linux-src2
cd linux-src2
make O=/path/to/out
cd ../linux-src
rm -rf ../linux-src2
make O=/path/to/out
Previously, we'd see errors like:
make[6]: *** No rule to make target
'/path/to/linux-src2/tools/include/linux/compiler.h', needed by
'/path/to/out/tools/bpf/resolve_btfids/libsubcmd/exec-cmd.o'. Stop.
Now, the properly-fixdep'd .cmd files will ignore a missing
/path/to/linux-src2/...
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/all/ZGVi9HbI43R5trN8@bhelgaas/
Link: https://lore.kernel.org/all/Zk-C5Eg84yt6_nml@google.com/
Link: https://lore.kernel.org/r/20240715203325.3832977-2-briannorris@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linking an object file into multiple modules is not supported
and causes a W=1 warning:
scripts/Makefile.build:236: drivers/platform/x86/intel/int3472/Makefile: common.o is added to multiple modules: intel_skl_int3472_discrete intel_skl_int3472_tps68470
Split out the common part here into a separate module to make it
more reliable.
Fixes: a2f9fbc247 ("platform/x86: int3472: Split into 2 drivers")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240529095009.1895618-1-arnd@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On almost all ASUS ROG series laptops the MCU used for the USB keyboard
also has a HID packet used for setting the brightness. This is usually
the same as the WMI method. But in some laptops the WMI method either
is missing or doesn't work, so we should default to the HID control.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240713074733.77334-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The default paranoid setting was updated in commit 0161028b7c
("perf/core: Change the default paranoia level to 2") so this comment is
no longer true.
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240802105256.335961-1-james.clark@linaro.org
Some uncore PMON registers are located in the MMIO space of the Host
Bridge and DRAM Controller device, which is located at D0:F0 for
Tiger Lake and later client generation.
Use D0:F0 as a default device. So it doesn't need to keep adding the
complete Device ID list for each generation anymore.
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20240731141353.759643-5-kan.liang@linux.intel.com
