[ Upstream commit 718d0766ce ]
On certain platforms, such as AMD Versal boards, the tx/rx queue pointer
registers are cleared after suspend, and the rx queue pointer register
is also disabled during suspend if WOL is enabled. Previously, we assumed
that these registers would be restored by macb_mac_link_up(). However,
in commit bf9cf80cab, macb_init_buffers() was moved from
macb_mac_link_up() to macb_open(). Therefore, we should call
macb_init_buffers() to reinitialize the tx/rx queue pointer registers
during resume.
Due to the reset of these two registers, we also need to adjust the
tx/rx rings accordingly. The tx ring will be handled by
gem_shuffle_tx_rings() in macb_mac_link_up(), so we only need to
initialize the rx ring here.
Fixes: bf9cf80cab ("net: macb: Fix tx/rx malfunction after phy link down and up")
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260312-macb-versal-v1-2-467647173fa4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1a7124ecd6 ]
Extract the initialization code for the GEM RX ring into a new function.
This change will be utilized in a subsequent patch. No functional changes
are introduced.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260312-macb-versal-v1-1-467647173fa4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 718d0766ce ("net: macb: Reinitialize tx/rx queue pointer registers and rx ring during resume")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5923a6e045 upstream.
There are slice row per frame and pic height parameters in DSC that needs
to be configured on every Selective Update in Early Transport mode. Use
helper provided by DSC code to configure these on Selective Update when in
Early Transport mode. Also fill crtc_state->psr2_su_area with full frame
area on full frame update for DSC calculation.
v2: move psr2_su_area under skip_sel_fetch_set_loop label
Bspec: 68927, 71709
Fixes: 467e4e061c ("drm/i915/psr: Enable psr2 early transport as possible")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260304113011.626542-5-jouni.hogander@intel.com
(cherry picked from commit 3140af2fab)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a64125730 upstream.
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs().
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 282343cf8a upstream.
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path.
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12b4c5d98c upstream.
Customer reported that some of their krb5 mounts were failing against
a single server as the client was trying to mount the shares with
wrong credentials. It turned out the client was reusing SMB session
from first mount to try mounting the other shares, even though a
different username= option had been specified to the other mounts.
By using username mount option along with sec=krb5 to search for
principals from keytab is supported by cifs.upcall(8) since
cifs-utils-4.8. So fix this by matching username mount option in
match_session() even with Kerberos.
For example, the second mount below should fail with -ENOKEY as there
is no 'foobar' principal in keytab (/etc/krb5.keytab). The client
ends up reusing SMB session from first mount to perform the second
one, which is wrong.
```
$ ktutil
ktutil: add_entry -password -p testuser -k 1 -e aes256-cts
Password for testuser@ZELDA.TEST:
ktutil: write_kt /etc/krb5.keytab
ktutil: quit
$ klist -ke
Keytab name: FILE:/etc/krb5.keytab
KVNO Principal
---- ----------------------------------------------------------------
1 testuser@ZELDA.TEST (aes256-cts-hmac-sha1-96)
$ mount.cifs //w22-root2/scratch /mnt/1 -o sec=krb5,username=testuser
$ mount.cifs //w22-root2/scratch /mnt/2 -o sec=krb5,username=foobar
$ mount -t cifs | grep -Po 'username=\K\w+'
testuser
testuser
```
Reported-by: Oscar Santos <ossantos@redhat.com>
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd815e6e39 upstream.
l2cap_information_rsp() checks that cmd_len covers the fixed
l2cap_info_rsp header (type + result, 4 bytes) but then reads
rsp->data without verifying that the payload is present:
- L2CAP_IT_FEAT_MASK calls get_unaligned_le32(rsp->data), which reads
4 bytes past the header (needs cmd_len >= 8).
- L2CAP_IT_FIXED_CHAN reads rsp->data[0], 1 byte past the header
(needs cmd_len >= 5).
A truncated L2CAP_INFO_RSP with result == L2CAP_IR_SUCCESS triggers an
out-of-bounds read of adjacent skb data.
Guard each data access with the required payload length check. If the
payload is too short, skip the read and let the state machine complete
with safe defaults (feat_mask and remote_fixed_chan remain zero from
kzalloc), so the info timer cleanup and l2cap_conn_start() still run
and the connection is not stalled.
Fixes: 4e8402a3f8 ("[Bluetooth] Retrieve L2CAP features mask on connection setup")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1514567569 upstream.
l2cap_ecred_reconf_rsp() casts the incoming data to struct
l2cap_ecred_conn_rsp (the ECRED *connection* response, 8 bytes with
result at offset 6) instead of struct l2cap_ecred_reconf_rsp (2 bytes
with result at offset 0).
This causes two problems:
- The sizeof(*rsp) length check requires 8 bytes instead of the
correct 2, so valid L2CAP_ECRED_RECONF_RSP packets are rejected
with -EPROTO.
- rsp->result reads from offset 6 instead of offset 0, returning
wrong data when the packet is large enough to pass the check.
Fix by using the correct type. Also pass the already byte-swapped
result variable to BT_DBG instead of the raw __le16 field.
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Johannes Möller <research@johannes-moeller.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebba09f198 upstream.
For Zhaoxin processors, the XSHA1 instruction requires the total memory
allocated at %rdi register must be 32 bytes, while the XSHA1 and
XSHA256 instruction doesn't perform any operation when %ecx is zero.
Due to these requirements, the current padlock-sha driver does not work
correctly with Zhaoxin processors. It cannot pass the self-tests and
therefore does not activate the driver on Zhaoxin processors. This issue
has been reported in Debian [1]. The self-tests fail with the
following messages [2]:
alg: shash: sha1-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha1 using sha1-padlock-nano failed (rc=-22)
alg: shash: sha256-padlock-nano test failed (wrong result) on test vector 0, cfg="init+update+final aligned buffer"
alg: self-tests for sha256 using sha256-padlock-nano failed (rc=-22)
Disable the padlock-sha driver on Zhaoxin processors with the CPU family
0x07 and newer. Following the suggestion in [3], support for PHE will be
added to lib/crypto/ instead.
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1113996
[2] https://linux-hardware.org/?probe=271fabb7a4&log=dmesg
[3] https://lore.kernel.org/linux-crypto/aUI4CGp6kK7mxgEr@gondor.apana.org.au/
Fixes: 63dc06cd12 ("crypto: padlock-sha - Use API partial block handling")
Cc: stable@vger.kernel.org
Signed-off-by: AlanSong-oc <AlanSong-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20260313080150.9393-2-AlanSong-oc@zhaoxin.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 672e5229e1 upstream.
ieee80211_chan_bw_change() iterates all stations and accesses
link->reserved.oper via sta->sdata->link[link_id]. For stations on
AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to
the VLAN sdata, whose link never participates in chanctx reservations.
This leaves link->reserved.oper zero-initialized with chan == NULL,
causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw()
when accessing chandef->chan->band during CSA.
Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata()
before accessing link data.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/20260305170812.2904208-1-nbd@nbd.name
[also change sta->sdata in ARRAY_SIZE even if it doesn't matter]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d4aef630b upstream.
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Ao Zhou <n05ec@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64dcbde7f8 upstream.
The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in
bnxt_async_event_process() uses a firmware-supplied 'type' field
directly as an index into bp->bs_trace[] without bounds validation.
The 'type' field is a 16-bit value extracted from DMA-mapped completion
ring memory that the NIC writes directly to host RAM. A malicious or
compromised NIC can supply any value from 0 to 65535, causing an
out-of-bounds access into kernel heap memory.
The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte
and writes to bs_trace->last_offset and bs_trace->wrapped, leading to
kernel memory corruption or a crash.
Fix by adding a bounds check and defining BNXT_TRACE_MAX as
DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently
defined firmware trace types (0x0 through 0xc).
Fixes: 84fcd9449f ("bnxt_en: Manage the FW trace context memory")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/SYBPR01MB7881A253A1C9775D277F30E9AF42A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55dc632ab2 upstream.
Allow the firmware and enable GPIOs to sleep.
This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.
-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --
Fixes: 43201767b4 ("NFC: nxp-nci: Convert to use GPIO descriptor")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Link: https://patch.msgid.link/20260317085337.146545-1-ian.ray@gehealthcare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3b8491961 upstream.
If copy_to_kernel_nofault() failed, no need to flush icache and just
return immediately.
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a47f0754bd upstream.
If memory access such as copy_{from, to}_kernel_nofault() failed, its
users do not know what happened, so it is very useful to print the
exception code for such cases. Furthermore, it is better to print the
caller function to know where is the entry.
Here are the low level call chains:
copy_from_kernel_nofault()
copy_from_kernel_nofault_loop()
__get_kernel_nofault()
copy_to_kernel_nofault()
copy_to_kernel_nofault_loop()
__put_kernel_nofault()
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 939080834f upstream.
Commit 60fbb14396 ("mm/huge_memory: adjust try_to_migrate_one() and
split_huge_pmd_locked()") return false unconditionally after
split_huge_pmd_locked(). This may fail try_to_migrate() early when
TTU_SPLIT_HUGE_PMD is specified.
The reason is the above commit adjusted try_to_migrate_one() to, when a
PMD-mapped THP entry is found, and TTU_SPLIT_HUGE_PMD is specified (for
example, via unmap_folio()), return false unconditionally. This breaks
the rmap walk and fail try_to_migrate() early, if this PMD-mapped THP is
mapped in multiple processes.
The user sensible impact of this bug could be:
* On memory pressure, shrink_folio_list() may split partially mapped
folio with split_folio_to_list(). Then free unmapped pages without IO.
If failed, it may not be reclaimed.
* On memory failure, memory_failure() would call try_to_split_thp_page()
to split folio contains the bad page. If succeed, the PG_has_hwpoisoned
bit is only set in the after-split folio contains @split_at. By doing
so, we limit bad memory. If failed to split, the whole folios is not
usable.
One way to reproduce:
Create an anonymous THP range and fork 512 children, so we have a
THP shared mapped in 513 processes. Then trigger folio split with
/sys/kernel/debug/split_huge_pages debugfs to split the THP folio to
order 0.
Without the above commit, we can successfully split to order 0. With the
above commit, the folio is still a large folio.
And currently there are two core users of TTU_SPLIT_HUGE_PMD:
* try_to_unmap_one()
* try_to_migrate_one()
try_to_unmap_one() would restart the rmap walk, so only
try_to_migrate_one() is affected.
We can't simply revert commit 60fbb14396 ("mm/huge_memory: adjust
try_to_migrate_one() and split_huge_pmd_locked()"), since it removed some
duplicated check covered by page_vma_mapped_walk().
This patch fixes this by restart page_vma_mapped_walk() after
split_huge_pmd_locked(). Since we cannot simply return "true" to fix the
problem, as that would affect another case:
When invoking folio_try_share_anon_rmap_pmd() from
split_huge_pmd_locked(), the latter can fail and leave a large folio
mapped through PTEs, in which case we ought to return true from
try_to_migrate_one(). This might result in unnecessary walking of the
rmap but is relatively harmless.
Link: https://lkml.kernel.org/r/20260305015006.27343-1-richard.weiyang@gmail.com
Fixes: 60fbb14396 ("mm/huge_memory: adjust try_to_migrate_one() and split_huge_pmd_locked()")
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Gavin Guo <gavinguo@igalia.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fae654083b upstream.
move_pages_huge_pmd() handles UFFDIO_MOVE for both normal THPs and huge
zero pages. For the huge zero page path, src_folio is explicitly set to
NULL, and is used as a sentinel to skip folio operations like lock and
rmap.
In the huge zero page branch, src_folio is NULL, so folio_mk_pmd(NULL,
pgprot) passes NULL through folio_pfn() and page_to_pfn(). With
SPARSEMEM_VMEMMAP this silently produces a bogus PFN, installing a PMD
pointing to non-existent physical memory. On other memory models it is a
NULL dereference.
Use page_folio(src_page) to obtain the valid huge zero folio from the
page, which was obtained from pmd_page() and remains valid throughout.
After commit d82d09e482 ("mm/huge_memory: mark PMD mappings of the huge
zero folio special"), moved huge zero PMDs must remain special so
vm_normal_page_pmd() continues to treat them as special mappings.
move_pages_huge_pmd() currently reconstructs the destination PMD in the
huge zero page branch, which drops PMD state such as pmd_special() on
architectures with CONFIG_ARCH_HAS_PTE_SPECIAL. As a result,
vm_normal_page_pmd() can treat the moved huge zero PMD as a normal page
and corrupt its refcount.
Instead of reconstructing the PMD from the folio, derive the destination
entry from src_pmdval after pmdp_huge_clear_flush(), then handle the PMD
metadata the same way move_huge_pmd() does for moved entries by marking it
soft-dirty and clearing uffd-wp.
Link: https://lkml.kernel.org/r/a1e787dd-b911-474d-8570-f37685357d86@lucifer.local
Fixes: e3981db444 ("mm: add folio_mk_pmd()")
Signed-off-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29f40594a2 upstream.
We batch unmap anonymous lazyfree folios by folio_unmap_pte_batch. If the
batch has a mix of writable and non-writable bits, we may end up setting
the entire batch writable. Fix this by respecting writable bit during
batching.
Although on a successful unmap of a lazyfree folio, the soft-dirty bit is
lost, preserve it on pte restoration by respecting the bit during
batching, to make the fix consistent w.r.t both writable bit and
soft-dirty bit.
I was able to write the below reproducer and crash the kernel.
Explanation of reproducer (set 64K mTHP to always):
Fault in a 64K large folio. Split the VMA at mid-point with
MADV_DONTFORK. fork() - parent points to the folio with 8 writable ptes
and 8 non-writable ptes. Merge the VMAs with MADV_DOFORK so that
folio_unmap_pte_batch() can determine all the 16 ptes as a batch. Do
MADV_FREE on the range to mark the folio as lazyfree. Write to the memory
to dirty the pte, eventually rmap will dirty the folio. Then trigger
reclaim, we will hit the pte restoration path, and the kernel will crash
with the trace given below.
The BUG happens at:
BUG_ON(atomic_inc_return(&ptc->anon_map_count) > 1 && rw);
The code path is asking for anonymous page to be mapped writable into the
pagetable. The BUG_ON() firing implies that such a writable page has been
mapped into the pagetables of more than one process, which breaks
anonymous memory/CoW semantics.
[ 21.134473] kernel BUG at mm/page_table_check.c:118!
[ 21.134497] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 21.135917] Modules linked in:
[ 21.136085] CPU: 1 UID: 0 PID: 1735 Comm: dup-lazyfree Not tainted 7.0.0-rc1-00116-g018018a17770 #1028 PREEMPT
[ 21.136858] Hardware name: linux,dummy-virt (DT)
[ 21.137019] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 21.137308] pc : page_table_check_set+0x28c/0x2a8
[ 21.137607] lr : page_table_check_set+0x134/0x2a8
[ 21.137885] sp : ffff80008a3b3340
[ 21.138124] x29: ffff80008a3b3340 x28: fffffdffc3d14400 x27: ffffd1a55e03d000
[ 21.138623] x26: 0040000000000040 x25: ffffd1a55f7dd000 x24: 0000000000000001
[ 21.139045] x23: 0000000000000001 x22: 0000000000000001 x21: ffffd1a55f217f30
[ 21.139629] x20: 0000000000134521 x19: 0000000000134519 x18: 005c43e000040000
[ 21.140027] x17: 0001400000000000 x16: 0001700000000000 x15: 000000000000ffff
[ 21.140578] x14: 000000000000000c x13: 005c006000000000 x12: 0000000000000020
[ 21.140828] x11: 0000000000000000 x10: 005c000000000000 x9 : ffffd1a55c079ee0
[ 21.141077] x8 : 0000000000000001 x7 : 005c03e000040000 x6 : 000000004000ffff
[ 21.141490] x5 : ffff00017fffce00 x4 : 0000000000000001 x3 : 0000000000000002
[ 21.141741] x2 : 0000000000134510 x1 : 0000000000000000 x0 : ffff0000c08228c0
[ 21.141991] Call trace:
[ 21.142093] page_table_check_set+0x28c/0x2a8 (P)
[ 21.142265] __page_table_check_ptes_set+0x144/0x1e8
[ 21.142441] __set_ptes_anysz.constprop.0+0x160/0x1a8
[ 21.142766] contpte_set_ptes+0xe8/0x140
[ 21.142907] try_to_unmap_one+0x10c4/0x10d0
[ 21.143177] rmap_walk_anon+0x100/0x250
[ 21.143315] try_to_unmap+0xa0/0xc8
[ 21.143441] shrink_folio_list+0x59c/0x18a8
[ 21.143759] shrink_lruvec+0x664/0xbf0
[ 21.144043] shrink_node+0x218/0x878
[ 21.144285] __node_reclaim.constprop.0+0x98/0x338
[ 21.144763] user_proactive_reclaim+0x2a4/0x340
[ 21.145056] reclaim_store+0x3c/0x60
[ 21.145216] dev_attr_store+0x20/0x40
[ 21.145585] sysfs_kf_write+0x84/0xa8
[ 21.145835] kernfs_fop_write_iter+0x130/0x1c8
[ 21.145994] vfs_write+0x2b8/0x368
[ 21.146119] ksys_write+0x70/0x110
[ 21.146240] __arm64_sys_write+0x24/0x38
[ 21.146380] invoke_syscall+0x50/0x120
[ 21.146513] el0_svc_common.constprop.0+0x48/0xf8
[ 21.146679] do_el0_svc+0x28/0x40
[ 21.146798] el0_svc+0x34/0x110
[ 21.146926] el0t_64_sync_handler+0xa0/0xe8
[ 21.147074] el0t_64_sync+0x198/0x1a0
[ 21.147225] Code: f9400441 b4fff241 17ffff94 d4210000 (d4210000)
[ 21.147440] ---[ end trace 0000000000000000 ]---
#define _GNU_SOURCE
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <sys/mman.h>
#include <string.h>
#include <sys/wait.h>
#include <sched.h>
#include <fcntl.h>
void write_to_reclaim() {
const char *path = "/sys/devices/system/node/node0/reclaim";
const char *value = "409600000000";
int fd = open(path, O_WRONLY);
if (fd == -1) {
perror("open");
exit(EXIT_FAILURE);
}
if (write(fd, value, sizeof("409600000000") - 1) == -1) {
perror("write");
close(fd);
exit(EXIT_FAILURE);
}
printf("Successfully wrote %s to %s\n", value, path);
close(fd);
}
int main()
{
char *ptr = mmap((void *)(1UL << 30), 1UL << 16, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if ((unsigned long)ptr != (1UL << 30)) {
perror("mmap");
return 1;
}
/* a 64K folio gets faulted in */
memset(ptr, 0, 1UL << 16);
/* 32K half will not be shared into child */
if (madvise(ptr, 1UL << 15, MADV_DONTFORK)) {
perror("madvise madv dontfork");
return 1;
}
pid_t pid = fork();
if (pid < 0) {
perror("fork");
return 1;
} else if (pid == 0) {
sleep(15);
} else {
/* merge VMAs. now first half of the 16 ptes are writable, the other half not. */
if (madvise(ptr, 1UL << 15, MADV_DOFORK)) {
perror("madvise madv fork");
return 1;
}
if (madvise(ptr, (1UL << 16), MADV_FREE)) {
perror("madvise madv free");
return 1;
}
/* dirty the large folio */
(*ptr) += 10;
write_to_reclaim();
// sleep(10);
waitpid(pid, NULL, 0);
}
}
Link: https://lkml.kernel.org/r/20260303061528.2429162-1-dev.jain@arm.com
Fixes: 354dffd295 ("mm: support batched unmap for lazyfree large folios during reclamation")
Signed-off-by: Dev Jain <dev.jain@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Tested-by: Lance Yang <lance.yang@linux.dev>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Harry Yoo <harry.yoo@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36f46b0e36 upstream.
When debug logging is enabled, read_key_from_user_keying() logs the first
8 bytes of the key payload and partially exposes the dm-crypt key. Stop
logging any key bytes.
Link: https://lkml.kernel.org/r/20260227230008.858641-2-thorsten.blum@linux.dev
Fixes: 479e58549b ("crash_dump: store dm crypt keys in kdump reserved memory")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Baoquan He <bhe@redhat.com>
Cc: Coiby Xu <coxu@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8aec14230 upstream.
Dingisoul with KASAN reports a use after free if device_add() fails in
nd_async_device_register().
Commit b6eae0f61d ("libnvdimm: Hold reference on parent while
scheduling async init") correctly added a reference on the parent device
to be held until asynchronous initialization was complete. However, if
device_add() results in an allocation failure the ref count of the
device drops to 0 prior to the parent pointer being accessed. Thus
resulting in use after free.
The bug bot AI correctly identified the fix. Save a reference to the
parent pointer to be used to drop the parent reference regardless of the
outcome of device_add().
Reported-by: Dingisoul <dingiso.kernel@gmail.com>
Closes: http://lore.kernel.org/8855544b-be9e-4153-aa55-0bc328b13733@gmail.com
Fixes: b6eae0f61d ("libnvdimm: Hold reference on parent while scheduling async init")
Cc: stable@vger.kernel.org
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260306-fix-uaf-async-init-v1-1-a28fd7526723@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17ad31b3a4 upstream.
When a reader's file descriptor is closed while in the middle of reading
a cache_request (rp->offset != 0), cache_release() decrements the
request's readers count but never checks whether it should free the
request.
In cache_read(), when readers drops to 0 and CACHE_PENDING is clear, the
cache_request is removed from the queue and freed along with its buffer
and cache_head reference. cache_release() lacks this cleanup.
The only other path that frees requests with readers == 0 is
cache_dequeue(), but it runs only when CACHE_PENDING transitions from
set to clear. If that transition already happened while readers was
still non-zero, cache_dequeue() will have skipped the request, and no
subsequent call will clean it up.
Add the same cleanup logic from cache_read() to cache_release(): after
decrementing readers, check if it reached 0 with CACHE_PENDING clear,
and if so, dequeue and free the cache_request.
Reported-by: NeilBrown <neilb@ownmail.net>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b658c1c44 upstream.
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense.
Fixes: 8bd0488b5e ("HID: bpf: add HID-BPF hooks for hid_hw_raw_requests")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d4c6c132e upstream.
This can happen in situations when CONFIG_HID_SUPPORT is set to no, or
some complex situations where struct bpf_wq is not exported.
So do the usual dance of hiding them before including vmlinux.h, and
then redefining them and make use of CO-RE to have the correct offsets.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603111558.KLCIxsZB-lkp@intel.com/
Fixes: fe8d561db3 ("selftests/hid: add wq test for hid_bpf_input_report()")
Cc: stable@vger.kernel.org
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5133b61aaf upstream.
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@kernel.org
Reported-by: Nicholas Carlini <npc@anthropic.com>
Tested-by: Nicholas Carlini <npc@anthropic.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7fcf179b8 upstream.
The /proc/fs/nfs/exports proc entry is created at module init
and persists for the module's lifetime. exports_proc_open()
captures the caller's current network namespace and stores
its svc_export_cache in seq->private, but takes no reference
on the namespace. If the namespace is subsequently torn down
(e.g. container destruction after the opener does setns() to a
different namespace), nfsd_net_exit() calls nfsd_export_shutdown()
which frees the cache. Subsequent reads on the still-open fd
dereference the freed cache_detail, walking a freed hash table.
Hold a reference on the struct net for the lifetime of the open
file descriptor. This prevents nfsd_net_exit() from running --
and thus prevents nfsd_export_shutdown() from freeing the cache
-- while any exports fd is open. cache_detail already stores
its net pointer (cd->net, set by cache_create_net()), so
exports_release() can retrieve it without additional per-file
storage.
Reported-by: Misbah Anjum N <misanjum@linux.ibm.com>
Closes: https://lore.kernel.org/linux-nfs/dcd371d3a95815a84ba7de52cef447b8@linux.ibm.com/
Fixes: 96d851c4d2 ("nfsd: use proper net while reading "exports" file")
Cc: stable@vger.kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48db892356 upstream.
svc_export_put() calls path_put() and auth_domain_put() immediately
when the last reference drops, before the RCU grace period. RCU
readers in e_show() and c_show() access both ex_path (via
seq_path/d_path) and ex_client->name (via seq_escape) without
holding a reference. If cache_clean removes the entry and drops the
last reference concurrently, the sub-objects are freed while still
in use, producing a NULL pointer dereference in d_path.
Commit 2530766492 ("nfsd: fix UAF when access ex_uuid or
ex_stats") moved kfree of ex_uuid and ex_stats into the
call_rcu callback, but left path_put() and auth_domain_put() running
before the grace period because both may sleep and call_rcu
callbacks execute in softirq context.
Replace call_rcu/kfree_rcu with queue_rcu_work(), which defers the
callback until after the RCU grace period and executes it in process
context where sleeping is permitted. This allows path_put() and
auth_domain_put() to be moved into the deferred callback alongside
the other resource releases. Apply the same fix to expkey_put(),
which has the identical pattern with ek_path and ek_client.
A dedicated workqueue scopes the shutdown drain to only NFSD
export release work items; flushing the shared
system_unbound_wq would stall on unrelated work from other
subsystems. nfsd_export_shutdown() uses rcu_barrier() followed
by flush_workqueue() to ensure all deferred release callbacks
complete before the export caches are destroyed.
Reported-by: Misbah Anjum N <misanjum@linux.ibm.com>
Closes: https://lore.kernel.org/linux-nfs/dcd371d3a95815a84ba7de52cef447b8@linux.ibm.com/
Fixes: c224edca7a ("nfsd: no need get cache ref when protected by rcu")
Fixes: 1b10f0b603 ("SUNRPC: no need get cache ref when protected by rcu")
Cc: stable@vger.kernel.org
Reviwed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Tested-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260317162959.345812316@linuxfoundation.org
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Link: https://lore.kernel.org/r/20260318122621.714862892@linuxfoundation.org
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Pavel Machek (CIP) <pavel@nabladev.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Wentao Guan <guanwentao@uniontech.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Mark Brown <brooniekernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fe44c4388 upstream.
kthread_exit became a macro to do_exit in commit 28aaa9c399
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9133bc3f05 upstream.
Add support for DisplayPort to the bridge, which entails the following:
- Get and use an interrupt for HPD;
- Properly clear all status bits in the interrupt handler;
Signed-off-by: John Ripple <john.ripple@keysight.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250915174543.2564994-1-john.ripple@keysight.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c80f46ac22 ]
DAMON core uses min_region_sz parameter value as the DAMON region
alignment. The alignment is made using ALIGN() and ALIGN_DOWN(), which
support only the power of two alignments. But DAMON core API callers can
set min_region_sz to an arbitrary number. Users can also set it
indirectly, using addr_unit.
When the alignment is not properly set, DAMON behavior becomes difficult
to expect and understand, makes it effectively broken. It doesn't cause a
kernel crash-like significant issue, though.
Fix the issue by disallowing min_region_sz input that is not a power of
two. Add the check to damon_commit_ctx(), as all DAMON API callers who
set min_region_sz uses the function.
This can be a sort of behavioral change, but it does not break users, for
the following reasons. As the symptom is making DAMON effectively broken,
it is not reasonable to believe there are real use cases of non-power of
two min_region_sz. There is no known use case or issue reports from the
setup, either.
In future, if we find real use cases of non-power of two alignments and we
can support it with low enough overhead, we can consider moving the
restriction. But, for now, simply disallowing the corner case should be
good enough as a hot fix.
Link: https://lkml.kernel.org/r/20260214214124.87689-1-sj@kernel.org
Fixes: d8f867fa08 ("mm/damon: add damon_ctx->min_sz_region")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Quanmin Yan <yanquanmin1@huawei.com>
Cc: <stable@vger.kernel.org> [6.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ min_region_sz => min_sz_region ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 177c694321 upstream.
Similarly to what commit e78f7b70e837 did for local task work additions,
use ->rings_rcu under RCU rather than dereference ->rings directly. See
that commit for more details.
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9618908026 upstream.
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper.
Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46d0d6f50d upstream.
To prevent timing attacks, MACs need to be compared in constant
time. Use the appropriate helper function for this.
Fixes: cfb6eeb4c8 ("[TCP]: MD5 Signature Option (RFC2385) support.")
Fixes: 658ddaaf66 ("tcp: md5: RST: getting md5 key from listener")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260302203409.13388-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4478e8eeb8 upstream.
The convention for KUnit tests is to have the test kconfig options
visible only when the code they depend on is already enabled. This way
only the tests that are relevant to the particular kernel build can be
enabled, either manually or via KUNIT_ALL_TESTS.
Update lib/crypto/tests/Kconfig to follow that convention, i.e. depend
on the corresponding library options rather than selecting them. This
fixes an issue where enabling KUNIT_ALL_TESTS enabled non-test code.
This does mean that it becomes a bit more difficult to enable *all* the
crypto library tests (which is what I do as a maintainer of the code),
since doing so will now require enabling other options that select the
libraries. Regardless, we should follow the standard KUnit convention.
I'll also add a .kunitconfig file that does enable all these options.
Note: currently most of the crypto library options are selected by
visible options in crypto/Kconfig, which can be used to enable them
without too much trouble. If in the future we end up with more cases
like CRYPTO_LIB_CURVE25519 which is selected only by WIREGUARD (thus
making CRYPTO_LIB_CURVE25519_KUNIT_TEST effectively depend on WIREGUARD
after this commit), we could consider adding a new kconfig option that
enables all the library code specifically for testing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/r/CAMuHMdULzMdxuTVfg8_4jdgzbzjfx-PHkcgbGSthcUx_sHRNMg@mail.gmail.com
Fixes: 4dcf6cadda ("lib/crypto: tests: Add KUnit tests for SHA-224 and SHA-256")
Fixes: 571eaeddb6 ("lib/crypto: tests: Add KUnit tests for SHA-384 and SHA-512")
Fixes: 6dd4d9f791 ("lib/crypto: tests: Add KUnit tests for Poly1305")
Fixes: 66b1306079 ("lib/crypto: tests: Add KUnit tests for SHA-1 and HMAC-SHA1")
Fixes: d6b6aac0cd ("lib/crypto: tests: Add KUnit tests for MD5 and HMAC-MD5")
Fixes: afc4e4a5f1 ("lib/crypto: tests: Migrate Curve25519 self-test to KUnit")
Fixes: 6401fd334d ("lib/crypto: tests: Add KUnit tests for BLAKE2b")
Fixes: 15c64c47e4 ("lib/crypto: tests: Add SHA3 kunit tests")
Fixes: b3aed551b3 ("lib/crypto: tests: Add KUnit tests for POLYVAL")
Fixes: ed894faccb ("lib/crypto: tests: Add KUnit tests for ML-DSA verification")
Fixes: 7246fe6cd6 ("lib/crypto: tests: Add KUnit tests for NH")
Cc: stable@vger.kernel.org
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260226191749.39397-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5794709bc upstream.
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq().
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26bc83b88b upstream.
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fdb12c8a24 ]
The difference between 'make clean' and 'make mrproper' is documented in
'make help' as:
clean - Remove most generated files but keep the config and
enough build support to build external modules
mrproper - Remove all generated files + config + various backup files
After commit 68b4fe32d7 ("kbuild: Add objtool to top-level clean
target"), running 'make clean' then attempting to build an external
module with the resulting build directory fails with
$ make ARCH=x86_64 O=build clean
$ make -C build M=... MO=...
...
/bin/sh: line 1: .../build/tools/objtool/objtool: No such file or directory
as 'make clean' removes the objtool binary.
Split the objtool clean target into mrproper and clean like Kbuild does
and remove all generated artifacts with 'make clean' except for the
objtool binary, which is removed with 'make mrproper'. To avoid a small
race when running the objtool clean target through both objtool_mrproper
and objtool_clean when running 'make mrproper', modify objtool's clean
up find command to avoid using find's '-delete' command by piping the
files into 'xargs rm -f' like the rest of Kbuild does.
Cc: stable@vger.kernel.org
Fixes: 68b4fe32d7 ("kbuild: Add objtool to top-level clean target")
Reported-by: Michal Suchanek <msuchanek@suse.de>
Closes: https://lore.kernel.org/20260225112633.6123-1-msuchanek@suse.de/
Reported-by: Rainer Fiebig <jrf@mailbox.org>
Closes: https://lore.kernel.org/62d12399-76e5-3d40-126a-7490b4795b17@mailbox.org/
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Tested-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260227-avoid-objtool-binary-removal-clean-v1-1-122f3e55eae9@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 87d0f901a9 ]
Explicitly set/clear CR8 write interception when AVIC is (de)activated to
fix a bug where KVM leaves the interception enabled after AVIC is
activated. E.g. if KVM emulates INIT=>WFS while AVIC is deactivated, CR8
will remain intercepted in perpetuity.
On its own, the dangling CR8 intercept is "just" a performance issue, but
combined with the TPR sync bug fixed by commit d02e48830e ("KVM: SVM:
Sync TPR from LAPIC into VMCB::V_TPR even if AVIC is active"), the danging
intercept is fatal to Windows guests as the TPR seen by hardware gets
wildly out of sync with reality.
Note, VMX isn't affected by the bug as TPR_THRESHOLD is explicitly ignored
when Virtual Interrupt Delivery is enabled, i.e. when APICv is active in
KVM's world. I.e. there's no need to trigger update_cr8_intercept(), this
is firmly an SVM implementation flaw/detail.
WARN if KVM gets a CR8 write #VMEXIT while AVIC is active, as KVM should
never enter the guest with AVIC enabled and CR8 writes intercepted.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Cc: Jim Mattson <jmattson@google.com>
Cc: Naveen N Rao (AMD) <naveen@kernel.org>
Cc: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260203190711.458413-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Squash fix to avic_deactivate_vmcb. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f2f6e67a56 ]
To help with a future change, add a helper to look up the maximum
physical ID depending on the vCPU AVIC mode. No functional change
intended.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/0ab9bf5e20a3463a4aa3a5ea9bbbac66beedf1d1.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 87d0f901a9 ("KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 574ef752d4 ]
KVM allows VMMs to specify the maximum possible APIC ID for a virtual
machine through KVM_CAP_MAX_VCPU_ID capability so as to limit data
structures related to APIC/x2APIC. Utilize the same to set the AVIC
physical max index in the VMCB, similar to VMX. This helps hardware
limit the number of entries to be scanned in the physical APIC ID table
speeding up IPI broadcasts for virtual machines with smaller number of
vCPUs.
Unlike VMX, SVM AVIC requires a single page to be allocated for the
Physical APIC ID table and the Logical APIC ID table, so retain the
existing approach of allocating those during VM init.
Signed-off-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/adb07ccdb3394cd79cb372ba6bcc69a4e4d4ef54.1757009416.git.naveen@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 87d0f901a9 ("KVM: SVM: Set/clear CR8 write interception when AVIC is (de)activated")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9435c1e143 ]
Different GIC types require the private IRQs to be initialised
differently. GICv5 is the culprit as it supports both a different
number of private IRQs, and all of these are PPIs (there are no
SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to
encode the type, the intid also needs to computed differently.
Up until now, the GIC model has been set after initialising the
private IRQs for a VCPU. Move this earlier to ensure that the GIC
model is available when configuring the private IRQs. While we're at
it, also move the setting of the in_kernel flag and implementation
revision to keep them grouped together as before.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Stable-dep-of: ac6769c8f9 ("KVM: arm64: Eagerly init vgic dist/redist on vgic creation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6465a8bbb0 ]
RK3576 is the first platform to introduce internal phase support, and
subsequent platforms are expected to adopt a similar design. In this
architecture, runtime suspend powers off the attached power domain, which
resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0,
SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and
restored, a requirement that falls outside the scope of the dw_mmc core.
Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff6f0286c8 ]
Per design recommendations, the memory clock can be gated when there
is no in-flight transfer, which helps save power. This feature is
introduced alongside internal phase support, and this patch enables it.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 6465a8bbb0 ("mmc: dw_mmc-rockchip: Fix runtime PM support for internal phase support")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7149be786d ]
gud_plane_atomic_update() currently handles both crtc state and
framebuffer updates - the complexity has led to a few accidental
NULL pointer dereferences.
Commit dc2d5ddb19 ("drm/gud: fix NULL fb and crtc dereferences
on USB disconnect") [1] fixed an earlier dereference but planes
can also be disabled in non-hotplug paths (e.g. display disables
via the desktop environment). The drm_dev_enter() call would not
cause an early return in those and subsequently oops on
dereferencing crtc:
BUG: kernel NULL pointer dereference, address: 00000000000005c8
CPU: 6 UID: 1000 PID: 3473 Comm: kwin_wayland Not tainted 6.18.2-200.vanilla.gud.fc42.x86_64 #1 PREEMPT(lazy)
RIP: 0010:gud_plane_atomic_update+0x148/0x470 [gud]
<TASK>
drm_atomic_helper_commit_planes+0x28e/0x310
drm_atomic_helper_commit_tail+0x2a/0x70
commit_tail+0xf1/0x150
drm_atomic_helper_commit+0x13c/0x180
drm_atomic_commit+0xb1/0xe0
info ? __pfx___drm_printfn_info+0x10/0x10
drm_mode_atomic_ioctl+0x70f/0x7c0
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
drm_ioctl_kernel+0xae/0x100
drm_ioctl+0x2a8/0x550
? __pfx_drm_mode_atomic_ioctl+0x10/0x10
__x64_sys_ioctl+0x97/0xe0
do_syscall_64+0x7e/0x7f0
? __ct_user_enter+0x56/0xd0
? do_syscall_64+0x158/0x7f0
? __ct_user_enter+0x56/0xd0
? do_syscall_64+0x158/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Split out crtc handling from gud_plane_atomic_update() into
atomic_enable() and atomic_disable() functions to delegate
crtc state transitioning work to the DRM helpers.
To preserve the gud state commit sequence [2], switch to
the runtime PM version of drm_atomic_helper_commit_tail() which
ensures that crtcs are enabled (hence sending the
GUD_REQ_SET_CONTROLLER_ENABLE and GUD_REQ_SET_DISPLAY_ENABLE
requests) before a framebuffer update is sent.
[1] https://lore.kernel.org/all/20251231055039.44266-1-me@shenghaoyang.info/
[2] https://github.com/notro/gud/wiki/GUD-Protocol#display-state
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202601142159.0v8ilfVs-lkp@intel.com/
Fixes: 73cfd166e0 ("drm/gud: Replace simple display pipe with DRM atomic helpers")
Cc: <stable@vger.kernel.org> # 6.19.x
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Shenghao Yang <me@shenghaoyang.info>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Ruben Wauters <rubenru09@aol.com>
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://patch.msgid.link/20260222054551.80864-1-me@shenghaoyang.info
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b9e5e9d2c1 ]
gud_probe() is currently very large and does many things, including
pipeline setup and feature detection, as well as having USB functions.
This patch re-orders the code in gud_probe() to make it more organised
and easier to split apart in the future.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251020140147.5017-1-rubenru09@aol.com/
Stable-dep-of: 7149be786d ("drm/gud: fix NULL crtc dereference on display disable")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
